forked from Minki/linux
ath10k: introduce dynamic pdev parameters
This is done exactly the same way as for vdev. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This commit is contained in:
Bartosz Markowski
Kalle Valo
parent
6d1506e788
commit
226a339ba8
@ -120,6 +120,7 @@ struct ath10k_wmi {
|
||||
wait_queue_head_t tx_credits_wq;
|
||||
struct wmi_cmd_map *cmd;
|
||||
struct wmi_vdev_param_map *vdev_param;
|
||||
struct wmi_pdev_param_map *pdev_param;
|
||||
|
||||
u32 num_mem_chunks;
|
||||
struct ath10k_mem_chunk mem_chunks[ATH10K_MAX_MEM_REQS];
|
||||
|
||||
@ -1882,12 +1882,12 @@ static int ath10k_start(struct ieee80211_hw *hw)
|
||||
else if (ar->state == ATH10K_STATE_RESTARTING)
|
||||
ar->state = ATH10K_STATE_RESTARTED;
|
||||
|
||||
ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_PMF_QOS, 1);
|
||||
ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->pmf_qos, 1);
|
||||
if (ret)
|
||||
ath10k_warn("could not enable WMI_PDEV_PARAM_PMF_QOS (%d)\n",
|
||||
ret);
|
||||
|
||||
ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_DYNAMIC_BW, 0);
|
||||
ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->dynamic_bw, 0);
|
||||
if (ret)
|
||||
ath10k_warn("could not init WMI_PDEV_PARAM_DYNAMIC_BW (%d)\n",
|
||||
ret);
|
||||
@ -2209,7 +2209,7 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
|
||||
struct ath10k *ar = hw->priv;
|
||||
struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif);
|
||||
int ret = 0;
|
||||
u32 vdev_param;
|
||||
u32 vdev_param, pdev_param;
|
||||
|
||||
mutex_lock(&ar->conf_mutex);
|
||||
|
||||
@ -2235,8 +2235,8 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
|
||||
"vdev %d set beacon tx mode to staggered\n",
|
||||
arvif->vdev_id);
|
||||
|
||||
ret = ath10k_wmi_pdev_set_param(ar,
|
||||
WMI_PDEV_PARAM_BEACON_TX_MODE,
|
||||
pdev_param = ar->wmi.pdev_param->beacon_tx_mode;
|
||||
ret = ath10k_wmi_pdev_set_param(ar, pdev_param,
|
||||
WMI_BEACON_STAGGERED_MODE);
|
||||
if (ret)
|
||||
ath10k_warn("Failed to set beacon mode for VDEV: %d\n",
|
||||
|
||||
@ -383,6 +383,111 @@ static struct wmi_vdev_param_map wmi_10x_vdev_param_map = {
|
||||
WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
|
||||
};
|
||||
|
||||
static struct wmi_pdev_param_map wmi_pdev_param_map = {
|
||||
.tx_chain_mask = WMI_PDEV_PARAM_TX_CHAIN_MASK,
|
||||
.rx_chain_mask = WMI_PDEV_PARAM_RX_CHAIN_MASK,
|
||||
.txpower_limit2g = WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
|
||||
.txpower_limit5g = WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
|
||||
.txpower_scale = WMI_PDEV_PARAM_TXPOWER_SCALE,
|
||||
.beacon_gen_mode = WMI_PDEV_PARAM_BEACON_GEN_MODE,
|
||||
.beacon_tx_mode = WMI_PDEV_PARAM_BEACON_TX_MODE,
|
||||
.resmgr_offchan_mode = WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
|
||||
.protection_mode = WMI_PDEV_PARAM_PROTECTION_MODE,
|
||||
.dynamic_bw = WMI_PDEV_PARAM_DYNAMIC_BW,
|
||||
.non_agg_sw_retry_th = WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
|
||||
.agg_sw_retry_th = WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
|
||||
.sta_kickout_th = WMI_PDEV_PARAM_STA_KICKOUT_TH,
|
||||
.ac_aggrsize_scaling = WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
|
||||
.ltr_enable = WMI_PDEV_PARAM_LTR_ENABLE,
|
||||
.ltr_ac_latency_be = WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
|
||||
.ltr_ac_latency_bk = WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
|
||||
.ltr_ac_latency_vi = WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
|
||||
.ltr_ac_latency_vo = WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
|
||||
.ltr_ac_latency_timeout = WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
|
||||
.ltr_sleep_override = WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
|
||||
.ltr_rx_override = WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
|
||||
.ltr_tx_activity_timeout = WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
|
||||
.l1ss_enable = WMI_PDEV_PARAM_L1SS_ENABLE,
|
||||
.dsleep_enable = WMI_PDEV_PARAM_DSLEEP_ENABLE,
|
||||
.pcielp_txbuf_flush = WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
|
||||
.pcielp_txbuf_watermark = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
|
||||
.pcielp_txbuf_tmo_en = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
|
||||
.pcielp_txbuf_tmo_value = WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
|
||||
.pdev_stats_update_period = WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
|
||||
.vdev_stats_update_period = WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
|
||||
.peer_stats_update_period = WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
|
||||
.bcnflt_stats_update_period = WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
|
||||
.pmf_qos = WMI_PDEV_PARAM_PMF_QOS,
|
||||
.arp_ac_override = WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
|
||||
.arpdhcp_ac_override = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.dcs = WMI_PDEV_PARAM_DCS,
|
||||
.ani_enable = WMI_PDEV_PARAM_ANI_ENABLE,
|
||||
.ani_poll_period = WMI_PDEV_PARAM_ANI_POLL_PERIOD,
|
||||
.ani_listen_period = WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
|
||||
.ani_ofdm_level = WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
|
||||
.ani_cck_level = WMI_PDEV_PARAM_ANI_CCK_LEVEL,
|
||||
.dyntxchain = WMI_PDEV_PARAM_DYNTXCHAIN,
|
||||
.proxy_sta = WMI_PDEV_PARAM_PROXY_STA,
|
||||
.idle_ps_config = WMI_PDEV_PARAM_IDLE_PS_CONFIG,
|
||||
.power_gating_sleep = WMI_PDEV_PARAM_POWER_GATING_SLEEP,
|
||||
.fast_channel_reset = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.burst_dur = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.burst_enable = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
};
|
||||
|
||||
static struct wmi_pdev_param_map wmi_10x_pdev_param_map = {
|
||||
.tx_chain_mask = WMI_10X_PDEV_PARAM_TX_CHAIN_MASK,
|
||||
.rx_chain_mask = WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
|
||||
.txpower_limit2g = WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
|
||||
.txpower_limit5g = WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
|
||||
.txpower_scale = WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
|
||||
.beacon_gen_mode = WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
|
||||
.beacon_tx_mode = WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
|
||||
.resmgr_offchan_mode = WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
|
||||
.protection_mode = WMI_10X_PDEV_PARAM_PROTECTION_MODE,
|
||||
.dynamic_bw = WMI_10X_PDEV_PARAM_DYNAMIC_BW,
|
||||
.non_agg_sw_retry_th = WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
|
||||
.agg_sw_retry_th = WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
|
||||
.sta_kickout_th = WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
|
||||
.ac_aggrsize_scaling = WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
|
||||
.ltr_enable = WMI_10X_PDEV_PARAM_LTR_ENABLE,
|
||||
.ltr_ac_latency_be = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
|
||||
.ltr_ac_latency_bk = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
|
||||
.ltr_ac_latency_vi = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
|
||||
.ltr_ac_latency_vo = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
|
||||
.ltr_ac_latency_timeout = WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
|
||||
.ltr_sleep_override = WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
|
||||
.ltr_rx_override = WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
|
||||
.ltr_tx_activity_timeout = WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
|
||||
.l1ss_enable = WMI_10X_PDEV_PARAM_L1SS_ENABLE,
|
||||
.dsleep_enable = WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
|
||||
.pcielp_txbuf_flush = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.pcielp_txbuf_watermark = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.pcielp_txbuf_tmo_en = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.pcielp_txbuf_tmo_value = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.pdev_stats_update_period = WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
|
||||
.vdev_stats_update_period = WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
|
||||
.peer_stats_update_period = WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
|
||||
.bcnflt_stats_update_period =
|
||||
WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
|
||||
.pmf_qos = WMI_10X_PDEV_PARAM_PMF_QOS,
|
||||
.arp_ac_override = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.arpdhcp_ac_override = WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
|
||||
.dcs = WMI_10X_PDEV_PARAM_DCS,
|
||||
.ani_enable = WMI_10X_PDEV_PARAM_ANI_ENABLE,
|
||||
.ani_poll_period = WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
|
||||
.ani_listen_period = WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
|
||||
.ani_ofdm_level = WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
|
||||
.ani_cck_level = WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
|
||||
.dyntxchain = WMI_10X_PDEV_PARAM_DYNTXCHAIN,
|
||||
.proxy_sta = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.idle_ps_config = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.power_gating_sleep = WMI_PDEV_PARAM_UNSUPPORTED,
|
||||
.fast_channel_reset = WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
|
||||
.burst_dur = WMI_10X_PDEV_PARAM_BURST_DUR,
|
||||
.burst_enable = WMI_10X_PDEV_PARAM_BURST_ENABLE,
|
||||
};
|
||||
|
||||
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar)
|
||||
{
|
||||
int ret;
|
||||
@ -1870,10 +1975,12 @@ int ath10k_wmi_attach(struct ath10k *ar)
|
||||
ath10k_warn("Firmware 10.X is not yet supported\n");
|
||||
ar->wmi.cmd = &wmi_10x_cmd_map;
|
||||
ar->wmi.vdev_param = &wmi_10x_vdev_param_map;
|
||||
ar->wmi.pdev_param = &wmi_10x_pdev_param_map;
|
||||
ret = -ENOTSUPP;
|
||||
} else {
|
||||
ar->wmi.cmd = &wmi_cmd_map;
|
||||
ar->wmi.vdev_param = &wmi_vdev_param_map;
|
||||
ar->wmi.pdev_param = &wmi_pdev_param_map;
|
||||
ret = 0;
|
||||
}
|
||||
|
||||
@ -2009,12 +2116,16 @@ int ath10k_wmi_pdev_resume_target(struct ath10k *ar)
|
||||
return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_resume_cmdid);
|
||||
}
|
||||
|
||||
int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
|
||||
u32 value)
|
||||
int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value)
|
||||
{
|
||||
struct wmi_pdev_set_param_cmd *cmd;
|
||||
struct sk_buff *skb;
|
||||
|
||||
if (id == WMI_PDEV_PARAM_UNSUPPORTED) {
|
||||
ath10k_warn("pdev param %d not supported by firmware\n", id);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
skb = ath10k_wmi_alloc_skb(sizeof(*cmd));
|
||||
if (!skb)
|
||||
return -ENOMEM;
|
||||
|
||||
@ -2072,6 +2072,60 @@ struct wmi_csa_event {
|
||||
#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
|
||||
#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
|
||||
|
||||
struct wmi_pdev_param_map {
|
||||
u32 tx_chain_mask;
|
||||
u32 rx_chain_mask;
|
||||
u32 txpower_limit2g;
|
||||
u32 txpower_limit5g;
|
||||
u32 txpower_scale;
|
||||
u32 beacon_gen_mode;
|
||||
u32 beacon_tx_mode;
|
||||
u32 resmgr_offchan_mode;
|
||||
u32 protection_mode;
|
||||
u32 dynamic_bw;
|
||||
u32 non_agg_sw_retry_th;
|
||||
u32 agg_sw_retry_th;
|
||||
u32 sta_kickout_th;
|
||||
u32 ac_aggrsize_scaling;
|
||||
u32 ltr_enable;
|
||||
u32 ltr_ac_latency_be;
|
||||
u32 ltr_ac_latency_bk;
|
||||
u32 ltr_ac_latency_vi;
|
||||
u32 ltr_ac_latency_vo;
|
||||
u32 ltr_ac_latency_timeout;
|
||||
u32 ltr_sleep_override;
|
||||
u32 ltr_rx_override;
|
||||
u32 ltr_tx_activity_timeout;
|
||||
u32 l1ss_enable;
|
||||
u32 dsleep_enable;
|
||||
u32 pcielp_txbuf_flush;
|
||||
u32 pcielp_txbuf_watermark;
|
||||
u32 pcielp_txbuf_tmo_en;
|
||||
u32 pcielp_txbuf_tmo_value;
|
||||
u32 pdev_stats_update_period;
|
||||
u32 vdev_stats_update_period;
|
||||
u32 peer_stats_update_period;
|
||||
u32 bcnflt_stats_update_period;
|
||||
u32 pmf_qos;
|
||||
u32 arp_ac_override;
|
||||
u32 arpdhcp_ac_override;
|
||||
u32 dcs;
|
||||
u32 ani_enable;
|
||||
u32 ani_poll_period;
|
||||
u32 ani_listen_period;
|
||||
u32 ani_ofdm_level;
|
||||
u32 ani_cck_level;
|
||||
u32 dyntxchain;
|
||||
u32 proxy_sta;
|
||||
u32 idle_ps_config;
|
||||
u32 power_gating_sleep;
|
||||
u32 fast_channel_reset;
|
||||
u32 burst_dur;
|
||||
u32 burst_enable;
|
||||
};
|
||||
|
||||
#define WMI_PDEV_PARAM_UNSUPPORTED 0
|
||||
|
||||
enum wmi_pdev_param {
|
||||
/* TX chian mask */
|
||||
WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
|
||||
@ -2171,6 +2225,97 @@ enum wmi_pdev_param {
|
||||
WMI_PDEV_PARAM_POWER_GATING_SLEEP,
|
||||
};
|
||||
|
||||
enum wmi_10x_pdev_param {
|
||||
/* TX chian mask */
|
||||
WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
|
||||
/* RX chian mask */
|
||||
WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
|
||||
/* TX power limit for 2G Radio */
|
||||
WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
|
||||
/* TX power limit for 5G Radio */
|
||||
WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
|
||||
/* TX power scale */
|
||||
WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
|
||||
/* Beacon generation mode . 0: host, 1: target */
|
||||
WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
|
||||
/* Beacon generation mode . 0: staggered 1: bursted */
|
||||
WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
|
||||
/*
|
||||
* Resource manager off chan mode .
|
||||
* 0: turn off off chan mode. 1: turn on offchan mode
|
||||
*/
|
||||
WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
|
||||
/*
|
||||
* Protection mode:
|
||||
* 0: no protection 1:use CTS-to-self 2: use RTS/CTS
|
||||
*/
|
||||
WMI_10X_PDEV_PARAM_PROTECTION_MODE,
|
||||
/* Dynamic bandwidth 0: disable 1: enable */
|
||||
WMI_10X_PDEV_PARAM_DYNAMIC_BW,
|
||||
/* Non aggregrate/ 11g sw retry threshold.0-disable */
|
||||
WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
|
||||
/* aggregrate sw retry threshold. 0-disable*/
|
||||
WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
|
||||
/* Station kickout threshold (non of consecutive failures).0-disable */
|
||||
WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
|
||||
/* Aggerate size scaling configuration per AC */
|
||||
WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
|
||||
/* LTR enable */
|
||||
WMI_10X_PDEV_PARAM_LTR_ENABLE,
|
||||
/* LTR latency for BE, in us */
|
||||
WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
|
||||
/* LTR latency for BK, in us */
|
||||
WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
|
||||
/* LTR latency for VI, in us */
|
||||
WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
|
||||
/* LTR latency for VO, in us */
|
||||
WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
|
||||
/* LTR AC latency timeout, in ms */
|
||||
WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
|
||||
/* LTR platform latency override, in us */
|
||||
WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
|
||||
/* LTR-RX override, in us */
|
||||
WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
|
||||
/* Tx activity timeout for LTR, in us */
|
||||
WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
|
||||
/* L1SS state machine enable */
|
||||
WMI_10X_PDEV_PARAM_L1SS_ENABLE,
|
||||
/* Deep sleep state machine enable */
|
||||
WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
|
||||
/* pdev level stats update period in ms */
|
||||
WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
|
||||
/* vdev level stats update period in ms */
|
||||
WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
|
||||
/* peer level stats update period in ms */
|
||||
WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
|
||||
/* beacon filter status update period */
|
||||
WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
|
||||
/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
|
||||
WMI_10X_PDEV_PARAM_PMF_QOS,
|
||||
/* Access category on which ARP and DHCP frames are sent */
|
||||
WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
|
||||
/* DCS configuration */
|
||||
WMI_10X_PDEV_PARAM_DCS,
|
||||
/* Enable/Disable ANI on target */
|
||||
WMI_10X_PDEV_PARAM_ANI_ENABLE,
|
||||
/* configure the ANI polling period */
|
||||
WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
|
||||
/* configure the ANI listening period */
|
||||
WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
|
||||
/* configure OFDM immunity level */
|
||||
WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
|
||||
/* configure CCK immunity level */
|
||||
WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
|
||||
/* Enable/Disable CDD for 1x1 STAs in rate control module */
|
||||
WMI_10X_PDEV_PARAM_DYNTXCHAIN,
|
||||
/* Enable/Disable Fast channel reset*/
|
||||
WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
|
||||
/* Set Bursting DUR */
|
||||
WMI_10X_PDEV_PARAM_BURST_DUR,
|
||||
/* Set Bursting Enable*/
|
||||
WMI_10X_PDEV_PARAM_BURST_ENABLE,
|
||||
};
|
||||
|
||||
struct wmi_pdev_set_param_cmd {
|
||||
__le32 param_id;
|
||||
__le32 param_value;
|
||||
@ -3797,8 +3942,7 @@ int ath10k_wmi_pdev_suspend_target(struct ath10k *ar);
|
||||
int ath10k_wmi_pdev_resume_target(struct ath10k *ar);
|
||||
int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g,
|
||||
u16 rd5g, u16 ctl2g, u16 ctl5g);
|
||||
int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id,
|
||||
u32 value);
|
||||
int ath10k_wmi_pdev_set_param(struct ath10k *ar, u32 id, u32 value);
|
||||
int ath10k_wmi_cmd_init(struct ath10k *ar);
|
||||
int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *);
|
||||
void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user