diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index f8c341d48caf..615874e03ce8 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1516,6 +1516,30 @@ config FB_S1D13XXX working with S1D13806). Product specs at +config FB_S3C2410 + tristate "S3C2410 LCD framebuffer support" + depends on FB && ARCH_S3C2410 + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR + ---help--- + Frame buffer driver for the built-in LCD controller in the Samsung + S3C2410 processor. + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called s3c2410fb. If you want to compile it as a module, + say M here and read . + + If unsure, say N. +config FB_S3C2410_DEBUG + bool "S3C2410 lcd debug messages" + depends on FB_S3C2410 + help + Turn on debugging messages. Note that you can set/unset at run time + through sysfs + config FB_VIRTUAL tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)" depends on FB diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 4e7d8d27b913..1fff29f48ca8 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -94,6 +94,7 @@ obj-$(CONFIG_FB_MAXINE) += maxinefb.o obj-$(CONFIG_FB_TX3912) += tx3912fb.o obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o obj-$(CONFIG_FB_IMX) += imxfb.o +obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o # Platform or fallback drivers go here obj-$(CONFIG_FB_VESA) += vesafb.o diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c new file mode 100644 index 000000000000..00c0223a352e --- /dev/null +++ b/drivers/video/s3c2410fb.c @@ -0,0 +1,915 @@ +/* + * linux/drivers/video/s3c2410fb.c + * Copyright (c) Arnaud Patard, Ben Dooks + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * S3C2410 LCD Controller Frame Buffer Driver + * based on skeletonfb.c, sa1100fb.c and others + * + * ChangeLog + * 2005-04-07: Arnaud Patard + * - u32 state -> pm_message_t state + * - S3C2410_{VA,SZ}_LCD -> S3C24XX + * + * 2005-03-15: Arnaud Patard + * - Removed the ioctl + * - use readl/writel instead of __raw_writel/__raw_readl + * + * 2004-12-04: Arnaud Patard + * - Added the possibility to set on or off the + * debugging mesaages + * - Replaced 0 and 1 by on or off when reading the + * /sys files + * + * 2005-03-23: Ben Dooks + * - added non 16bpp modes + * - updated platform information for range of x/y/bpp + * - add code to ensure palette is written correctly + * - add pixel clock divisor control + * + * 2004-11-11: Arnaud Patard + * - Removed the use of currcon as it no more exist + * - Added LCD power sysfs interface + * + * 2004-11-03: Ben Dooks + * - minor cleanups + * - add suspend/resume support + * - s3c2410fb_setcolreg() not valid in >8bpp modes + * - removed last CONFIG_FB_S3C2410_FIXED + * - ensure lcd controller stopped before cleanup + * - added sysfs interface for backlight power + * - added mask for gpio configuration + * - ensured IRQs disabled during GPIO configuration + * - disable TPAL before enabling video + * + * 2004-09-20: Arnaud Patard + * - Suppress command line options + * + * 2004-09-15: Arnaud Patard + * - code cleanup + * + * 2004-09-07: Arnaud Patard + * - Renamed from h1940fb.c to s3c2410fb.c + * - Add support for different devices + * - Backlight support + * + * 2004-09-05: Herbert Pötzl + * - added clock (de-)allocation code + * - added fixem fbmem option + * + * 2004-07-27: Arnaud Patard + * - code cleanup + * - added a forgotten return in h1940fb_init + * + * 2004-07-19: Herbert Pötzl + * - code cleanup and extended debugging + * + * 2004-07-15: Arnaud Patard + * - First version + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +#ifdef CONFIG_PM +#include +#endif + +#include "s3c2410fb.h" + + +static struct s3c2410fb_mach_info *mach_info; + +/* Debugging stuff */ +#ifdef CONFIG_FB_S3C2410_DEBUG +static int debug = 1; +#else +static int debug = 0; +#endif + +#define dprintk(msg...) if (debug) { printk(KERN_DEBUG "s3c2410fb: " msg); } + +/* useful functions */ + +/* s3c2410fb_set_lcdaddr + * + * initialise lcd controller address pointers +*/ + +static void s3c2410fb_set_lcdaddr(struct s3c2410fb_info *fbi) +{ + struct fb_var_screeninfo *var = &fbi->fb->var; + unsigned long saddr1, saddr2, saddr3; + + saddr1 = fbi->fb->fix.smem_start >> 1; + saddr2 = fbi->fb->fix.smem_start; + saddr2 += (var->xres * var->yres * var->bits_per_pixel)/8; + saddr2>>= 1; + + saddr3 = S3C2410_OFFSIZE(0) | S3C2410_PAGEWIDTH(var->xres); + + dprintk("LCDSADDR1 = 0x%08lx\n", saddr1); + dprintk("LCDSADDR2 = 0x%08lx\n", saddr2); + dprintk("LCDSADDR3 = 0x%08lx\n", saddr3); + + writel(saddr1, S3C2410_LCDSADDR1); + writel(saddr2, S3C2410_LCDSADDR2); + writel(saddr3, S3C2410_LCDSADDR3); +} + +/* s3c2410fb_calc_pixclk() + * + * calculate divisor for clk->pixclk +*/ + +static unsigned int s3c2410fb_calc_pixclk(struct s3c2410fb_info *fbi, + unsigned long pixclk) +{ + unsigned long clk = clk_get_rate(fbi->clk); + unsigned long long div; + + /* pixclk is in picoseoncds, our clock is in Hz + * + * Hz -> picoseconds is / 10^-12 + */ + + div = (unsigned long long)clk * pixclk; + do_div(div,1000000UL); + do_div(div,1000000UL); + + dprintk("pixclk %ld, divisor is %ld\n", pixclk, (long)div); + return div; +} + +/* + * s3c2410fb_check_var(): + * Get the video params out of 'var'. If a value doesn't fit, round it up, + * if it's too big, return -EINVAL. + * + */ +static int s3c2410fb_check_var(struct fb_var_screeninfo *var, + struct fb_info *info) +{ + struct s3c2410fb_info *fbi = info->par; + + dprintk("check_var(var=%p, info=%p)\n", var, info); + + /* validate x/y resolution */ + + if (var->yres > fbi->mach_info->yres.max) + var->yres = fbi->mach_info->yres.max; + else if (var->yres < fbi->mach_info->yres.min) + var->yres = fbi->mach_info->yres.min; + + if (var->xres > fbi->mach_info->xres.max) + var->yres = fbi->mach_info->xres.max; + else if (var->xres < fbi->mach_info->xres.min) + var->xres = fbi->mach_info->xres.min; + + /* validate bpp */ + + if (var->bits_per_pixel > fbi->mach_info->bpp.max) + var->bits_per_pixel = fbi->mach_info->bpp.max; + else if (var->bits_per_pixel < fbi->mach_info->bpp.min) + var->bits_per_pixel = fbi->mach_info->bpp.min; + + /* set r/g/b positions */ + + if (var->bits_per_pixel == 16) { + var->red.offset = 11; + var->green.offset = 5; + var->blue.offset = 0; + var->red.length = 5; + var->green.length = 6; + var->blue.length = 5; + var->transp.length = 0; + } else { + var->red.length = var->bits_per_pixel; + var->red.offset = 0; + var->green.length = var->bits_per_pixel; + var->green.offset = 0; + var->blue.length = var->bits_per_pixel; + var->blue.offset = 0; + var->transp.length = 0; + } + + return 0; +} + +/* s3c2410fb_activate_var + * + * activate (set) the controller from the given framebuffer + * information +*/ + +static int s3c2410fb_activate_var(struct s3c2410fb_info *fbi, + struct fb_var_screeninfo *var) +{ + fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_MODEMASK; + + dprintk("%s: var->xres = %d\n", __FUNCTION__, var->xres); + dprintk("%s: var->yres = %d\n", __FUNCTION__, var->yres); + dprintk("%s: var->bpp = %d\n", __FUNCTION__, var->bits_per_pixel); + + switch (var->bits_per_pixel) { + case 1: + fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT1BPP; + break; + case 2: + fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT2BPP; + break; + case 4: + fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT4BPP; + break; + case 8: + fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT8BPP; + break; + case 16: + fbi->regs.lcdcon1 |= S3C2410_LCDCON1_TFT16BPP; + break; + } + + /* check to see if we need to update sync/borders */ + + if (!fbi->mach_info->fixed_syncs) { + dprintk("setting vert: up=%d, low=%d, sync=%d\n", + var->upper_margin, var->lower_margin, + var->vsync_len); + + dprintk("setting horz: lft=%d, rt=%d, sync=%d\n", + var->left_margin, var->right_margin, + var->hsync_len); + + fbi->regs.lcdcon2 = + S3C2410_LCDCON2_VBPD(var->upper_margin - 1) | + S3C2410_LCDCON2_VFPD(var->lower_margin - 1) | + S3C2410_LCDCON2_VSPW(var->vsync_len - 1); + + fbi->regs.lcdcon3 = + S3C2410_LCDCON3_HBPD(var->right_margin - 1) | + S3C2410_LCDCON3_HFPD(var->left_margin - 1); + + fbi->regs.lcdcon4 &= ~S3C2410_LCDCON4_HSPW(0xff); + fbi->regs.lcdcon4 |= S3C2410_LCDCON4_HSPW(var->hsync_len - 1); + } + + /* update X/Y info */ + + fbi->regs.lcdcon2 &= ~S3C2410_LCDCON2_LINEVAL(0x3ff); + fbi->regs.lcdcon2 |= S3C2410_LCDCON2_LINEVAL(var->yres - 1); + + fbi->regs.lcdcon3 &= ~S3C2410_LCDCON3_HOZVAL(0x7ff); + fbi->regs.lcdcon3 |= S3C2410_LCDCON3_HOZVAL(var->xres - 1); + + if (var->pixclock > 0) { + int clkdiv = s3c2410fb_calc_pixclk(fbi, var->pixclock); + + clkdiv = (clkdiv / 2) -1; + if (clkdiv < 0) + clkdiv = 0; + + fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_CLKVAL(0x3ff); + fbi->regs.lcdcon1 |= S3C2410_LCDCON1_CLKVAL(clkdiv); + } + + /* write new registers */ + + dprintk("new register set:\n"); + dprintk("lcdcon[1] = 0x%08lx\n", fbi->regs.lcdcon1); + dprintk("lcdcon[2] = 0x%08lx\n", fbi->regs.lcdcon2); + dprintk("lcdcon[3] = 0x%08lx\n", fbi->regs.lcdcon3); + dprintk("lcdcon[4] = 0x%08lx\n", fbi->regs.lcdcon4); + dprintk("lcdcon[5] = 0x%08lx\n", fbi->regs.lcdcon5); + + writel(fbi->regs.lcdcon1 & ~S3C2410_LCDCON1_ENVID, S3C2410_LCDCON1); + writel(fbi->regs.lcdcon2, S3C2410_LCDCON2); + writel(fbi->regs.lcdcon3, S3C2410_LCDCON3); + writel(fbi->regs.lcdcon4, S3C2410_LCDCON4); + writel(fbi->regs.lcdcon5, S3C2410_LCDCON5); + + /* set lcd address pointers */ + s3c2410fb_set_lcdaddr(fbi); + + writel(fbi->regs.lcdcon1, S3C2410_LCDCON1); +} + + +/* + * s3c2410fb_set_par - Optional function. Alters the hardware state. + * @info: frame buffer structure that represents a single frame buffer + * + */ +static int s3c2410fb_set_par(struct fb_info *info) +{ + struct s3c2410fb_info *fbi = info->par; + struct fb_var_screeninfo *var = &info->var; + + if (var->bits_per_pixel == 16) + fbi->fb->fix.visual = FB_VISUAL_TRUECOLOR; + else + fbi->fb->fix.visual = FB_VISUAL_PSEUDOCOLOR; + + fbi->fb->fix.line_length = (var->width*var->bits_per_pixel)/8; + + /* activate this new configuration */ + + s3c2410fb_activate_var(fbi, var); + return 0; +} + +static void schedule_palette_update(struct s3c2410fb_info *fbi, + unsigned int regno, unsigned int val) +{ + unsigned long flags; + unsigned long irqen; + + local_irq_save(flags); + + fbi->palette_buffer[regno] = val; + + if (!fbi->palette_ready) { + fbi->palette_ready = 1; + + /* enable IRQ */ + irqen = readl(S3C2410_LCDINTMSK); + irqen &= ~S3C2410_LCDINT_FRSYNC; + writel(irqen, S3C2410_LCDINTMSK); + } + + local_irq_restore(flags); +} + +/* from pxafb.c */ +static inline unsigned int chan_to_field(unsigned int chan, struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int s3c2410fb_setcolreg(unsigned regno, + unsigned red, unsigned green, unsigned blue, + unsigned transp, struct fb_info *info) +{ + struct s3c2410fb_info *fbi = info->par; + unsigned int val; + + /* dprintk("setcol: regno=%d, rgb=%d,%d,%d\n", regno, red, green, blue); */ + + switch (fbi->fb->fix.visual) { + case FB_VISUAL_TRUECOLOR: + /* true-colour, use pseuo-palette */ + + if (regno < 16) { + u32 *pal = fbi->fb->pseudo_palette; + + val = chan_to_field(red, &fbi->fb->var.red); + val |= chan_to_field(green, &fbi->fb->var.green); + val |= chan_to_field(blue, &fbi->fb->var.blue); + + pal[regno] = val; + } + break; + + case FB_VISUAL_PSEUDOCOLOR: + if (regno < 256) { + /* currently assume RGB 5-6-5 mode */ + + val = ((red >> 0) & 0xf800); + val |= ((green >> 5) & 0x07e0); + val |= ((blue >> 11) & 0x001f); + + writel(val, S3C2410_TFTPAL(regno)); + schedule_palette_update(fbi, regno, val); + } + + break; + + default: + return 1; /* unknown type */ + } + + return 0; +} + + +/** + * s3c2410fb_blank + * @blank_mode: the blank mode we want. + * @info: frame buffer structure that represents a single frame buffer + * + * Blank the screen if blank_mode != 0, else unblank. Return 0 if + * blanking succeeded, != 0 if un-/blanking failed due to e.g. a + * video mode which doesn't support it. Implements VESA suspend + * and powerdown modes on hardware that supports disabling hsync/vsync: + * blank_mode == 2: suspend vsync + * blank_mode == 3: suspend hsync + * blank_mode == 4: powerdown + * + * Returns negative errno on error, or zero on success. + * + */ +static int s3c2410fb_blank(int blank_mode, struct fb_info *info) +{ + dprintk("blank(mode=%d, info=%p)\n", blank_mode, info); + + if (mach_info == NULL) + return -EINVAL; + + if (blank_mode == FB_BLANK_UNBLANK) + writel(0x0, S3C2410_TPAL); + else { + dprintk("setting TPAL to output 0x000000\n"); + writel(S3C2410_TPAL_EN, S3C2410_TPAL); + } + + return 0; +} + +static int s3c2410fb_debug_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", debug ? "on" : "off"); +} +static int s3c2410fb_debug_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t len) +{ + if (mach_info == NULL) + return -EINVAL; + + if (len < 1) + return -EINVAL; + + if (strnicmp(buf, "on", 2) == 0 || + strnicmp(buf, "1", 1) == 0) { + debug = 1; + printk(KERN_DEBUG "s3c2410fb: Debug On"); + } else if (strnicmp(buf, "off", 3) == 0 || + strnicmp(buf, "0", 1) == 0) { + debug = 0; + printk(KERN_DEBUG "s3c2410fb: Debug Off"); + } else { + return -EINVAL; + } + + return len; +} + + +static DEVICE_ATTR(debug, 0666, + s3c2410fb_debug_show, + s3c2410fb_debug_store); + +static struct fb_ops s3c2410fb_ops = { + .owner = THIS_MODULE, + .fb_check_var = s3c2410fb_check_var, + .fb_set_par = s3c2410fb_set_par, + .fb_blank = s3c2410fb_blank, + .fb_setcolreg = s3c2410fb_setcolreg, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_cursor = soft_cursor, +}; + + +/* + * s3c2410fb_map_video_memory(): + * Allocates the DRAM memory for the frame buffer. This buffer is + * remapped into a non-cached, non-buffered, memory region to + * allow palette and pixel writes to occur without flushing the + * cache. Once this area is remapped, all virtual memory + * access to the video memory should occur at the new region. + */ +static int __init s3c2410fb_map_video_memory(struct s3c2410fb_info *fbi) +{ + dprintk("map_video_memory(fbi=%p)\n", fbi); + + fbi->map_size = PAGE_ALIGN(fbi->fb->fix.smem_len + PAGE_SIZE); + fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size, + &fbi->map_dma, GFP_KERNEL); + + fbi->map_size = fbi->fb->fix.smem_len; + + if (fbi->map_cpu) { + /* prevent initial garbage on screen */ + dprintk("map_video_memory: clear %p:%08x\n", + fbi->map_cpu, fbi->map_size); + memset(fbi->map_cpu, 0xf0, fbi->map_size); + + fbi->screen_dma = fbi->map_dma; + fbi->fb->screen_base = fbi->map_cpu; + fbi->fb->fix.smem_start = fbi->screen_dma; + + dprintk("map_video_memory: dma=%08x cpu=%p size=%08x\n", + fbi->map_dma, fbi->map_cpu, fbi->fb->fix.smem_len); + } + + return fbi->map_cpu ? 0 : -ENOMEM; +} + +static inline void s3c2410fb_unmap_video_memory(struct s3c2410fb_info *fbi) +{ + dma_free_writecombine(fbi->dev,fbi->map_size,fbi->map_cpu, fbi->map_dma); +} + +static inline void modify_gpio(void __iomem *reg, + unsigned long set, unsigned long mask) +{ + unsigned long tmp; + + tmp = readl(reg) & ~mask; + writel(tmp | set, reg); +} + + +/* + * s3c2410fb_init_registers - Initialise all LCD-related registers + */ + +int s3c2410fb_init_registers(struct s3c2410fb_info *fbi) +{ + unsigned long flags; + + /* Initialise LCD with values from haret */ + + local_irq_save(flags); + + /* modify the gpio(s) with interrupts set (bjd) */ + + modify_gpio(S3C2410_GPCUP, mach_info->gpcup, mach_info->gpcup_mask); + modify_gpio(S3C2410_GPCCON, mach_info->gpccon, mach_info->gpccon_mask); + modify_gpio(S3C2410_GPDUP, mach_info->gpdup, mach_info->gpdup_mask); + modify_gpio(S3C2410_GPDCON, mach_info->gpdcon, mach_info->gpdcon_mask); + + local_irq_restore(flags); + + writel(fbi->regs.lcdcon1, S3C2410_LCDCON1); + writel(fbi->regs.lcdcon2, S3C2410_LCDCON2); + writel(fbi->regs.lcdcon3, S3C2410_LCDCON3); + writel(fbi->regs.lcdcon4, S3C2410_LCDCON4); + writel(fbi->regs.lcdcon5, S3C2410_LCDCON5); + + s3c2410fb_set_lcdaddr(fbi); + + dprintk("LPCSEL = 0x%08lx\n", mach_info->lpcsel); + writel(mach_info->lpcsel, S3C2410_LPCSEL); + + dprintk("replacing TPAL %08x\n", readl(S3C2410_TPAL)); + + /* ensure temporary palette disabled */ + writel(0x00, S3C2410_TPAL); + + /* Enable video by setting the ENVID bit to 1 */ + fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID; + writel(fbi->regs.lcdcon1, S3C2410_LCDCON1); + return 0; +} + +static void s3c2410fb_write_palette(struct s3c2410fb_info *fbi) +{ + unsigned int i; + unsigned long ent; + + fbi->palette_ready = 0; + + for (i = 0; i < 256; i++) { + if ((ent = fbi->palette_buffer[i]) == PALETTE_BUFF_CLEAR) + continue; + + writel(ent, S3C2410_TFTPAL(i)); + + /* it seems the only way to know exactly + * if the palette wrote ok, is to check + * to see if the value verifies ok + */ + + if (readw(S3C2410_TFTPAL(i)) == ent) + fbi->palette_buffer[i] = PALETTE_BUFF_CLEAR; + else + fbi->palette_ready = 1; /* retry */ + } +} + +static irqreturn_t s3c2410fb_irq(int irq, void *dev_id, struct pt_regs *r) +{ + struct s3c2410fb_info *fbi = dev_id; + unsigned long lcdirq = readl(S3C2410_LCDINTPND); + + if (lcdirq & S3C2410_LCDINT_FRSYNC) { + if (fbi->palette_ready) + s3c2410fb_write_palette(fbi); + + writel(S3C2410_LCDINT_FRSYNC, S3C2410_LCDINTPND); + writel(S3C2410_LCDINT_FRSYNC, S3C2410_LCDSRCPND); + } + + return IRQ_HANDLED; +} + +static char driver_name[]="s3c2410fb"; + +int __init s3c2410fb_probe(struct device *dev) +{ + struct s3c2410fb_info *info; + struct fb_info *fbinfo; + struct platform_device *pdev = to_platform_device(dev); + struct s3c2410fb_hw *mregs; + int ret; + int irq; + int i; + + mach_info = dev->platform_data; + if (mach_info == NULL) { + dev_err(dev,"no platform data for lcd, cannot attach\n"); + return -EINVAL; + } + + mregs = &mach_info->regs; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "no irq for device\n"); + return -ENOENT; + } + + fbinfo = framebuffer_alloc(sizeof(struct s3c2410fb_info), dev); + if (!fbinfo) { + return -ENOMEM; + } + + + info = fbinfo->par; + info->fb = fbinfo; + dev_set_drvdata(dev, fbinfo); + + s3c2410fb_init_registers(info); + + dprintk("devinit\n"); + + strcpy(fbinfo->fix.id, driver_name); + + memcpy(&info->regs, &mach_info->regs, sizeof(info->regs)); + + info->mach_info = dev->platform_data; + + fbinfo->fix.type = FB_TYPE_PACKED_PIXELS; + fbinfo->fix.type_aux = 0; + fbinfo->fix.xpanstep = 0; + fbinfo->fix.ypanstep = 0; + fbinfo->fix.ywrapstep = 0; + fbinfo->fix.accel = FB_ACCEL_NONE; + + fbinfo->var.nonstd = 0; + fbinfo->var.activate = FB_ACTIVATE_NOW; + fbinfo->var.height = mach_info->height; + fbinfo->var.width = mach_info->width; + fbinfo->var.accel_flags = 0; + fbinfo->var.vmode = FB_VMODE_NONINTERLACED; + + fbinfo->fbops = &s3c2410fb_ops; + fbinfo->flags = FBINFO_FLAG_DEFAULT; + fbinfo->pseudo_palette = &info->pseudo_pal; + + fbinfo->var.xres = mach_info->xres.defval; + fbinfo->var.xres_virtual = mach_info->xres.defval; + fbinfo->var.yres = mach_info->yres.defval; + fbinfo->var.yres_virtual = mach_info->yres.defval; + fbinfo->var.bits_per_pixel = mach_info->bpp.defval; + + fbinfo->var.upper_margin = S3C2410_LCDCON2_GET_VBPD(mregs->lcdcon2) +1; + fbinfo->var.lower_margin = S3C2410_LCDCON2_GET_VFPD(mregs->lcdcon2) +1; + fbinfo->var.vsync_len = S3C2410_LCDCON2_GET_VSPW(mregs->lcdcon2) + 1; + + fbinfo->var.left_margin = S3C2410_LCDCON3_GET_HFPD(mregs->lcdcon3) + 1; + fbinfo->var.right_margin = S3C2410_LCDCON3_GET_HBPD(mregs->lcdcon3) + 1; + fbinfo->var.hsync_len = S3C2410_LCDCON4_GET_HSPW(mregs->lcdcon4) + 1; + + fbinfo->var.red.offset = 11; + fbinfo->var.green.offset = 5; + fbinfo->var.blue.offset = 0; + fbinfo->var.transp.offset = 0; + fbinfo->var.red.length = 5; + fbinfo->var.green.length = 6; + fbinfo->var.blue.length = 5; + fbinfo->var.transp.length = 0; + fbinfo->fix.smem_len = mach_info->xres.max * + mach_info->yres.max * + mach_info->bpp.max / 8; + + for (i = 0; i < 256; i++) + info->palette_buffer[i] = PALETTE_BUFF_CLEAR; + + if (!request_mem_region((unsigned long)S3C24XX_VA_LCD, SZ_1M, "s3c2410-lcd")) { + ret = -EBUSY; + goto dealloc_fb; + } + + + dprintk("got LCD region\n"); + + ret = request_irq(irq, s3c2410fb_irq, SA_INTERRUPT, pdev->name, info); + if (ret) { + dev_err(dev, "cannot get irq %d - err %d\n", irq, ret); + ret = -EBUSY; + goto release_mem; + } + + info->clk = clk_get(NULL, "lcd"); + if (!info->clk || IS_ERR(info->clk)) { + printk(KERN_ERR "failed to get lcd clock source\n"); + ret = -ENOENT; + goto release_irq; + } + + clk_use(info->clk); + clk_enable(info->clk); + dprintk("got and enabled clock\n"); + + msleep(1); + + /* Initialize video memory */ + ret = s3c2410fb_map_video_memory(info); + if (ret) { + printk( KERN_ERR "Failed to allocate video RAM: %d\n", ret); + ret = -ENOMEM; + goto release_clock; + } + dprintk("got video memory\n"); + + ret = s3c2410fb_init_registers(info); + + ret = s3c2410fb_check_var(&fbinfo->var, fbinfo); + + ret = register_framebuffer(fbinfo); + if (ret < 0) { + printk(KERN_ERR "Failed to register framebuffer device: %d\n", ret); + goto free_video_memory; + } + + /* create device files */ + device_create_file(dev, &dev_attr_debug); + + printk(KERN_INFO "fb%d: %s frame buffer device\n", + fbinfo->node, fbinfo->fix.id); + + return 0; + +free_video_memory: + s3c2410fb_unmap_video_memory(info); +release_clock: + clk_disable(info->clk); + clk_unuse(info->clk); + clk_put(info->clk); +release_irq: + free_irq(irq,info); +release_mem: + release_mem_region((unsigned long)S3C24XX_VA_LCD, S3C24XX_SZ_LCD); +dealloc_fb: + framebuffer_release(fbinfo); + return ret; +} + +/* s3c2410fb_stop_lcd + * + * shutdown the lcd controller +*/ + +static void s3c2410fb_stop_lcd(void) +{ + unsigned long flags; + unsigned long tmp; + + local_irq_save(flags); + + tmp = readl(S3C2410_LCDCON1); + writel(tmp & ~S3C2410_LCDCON1_ENVID, S3C2410_LCDCON1); + + local_irq_restore(flags); +} + +/* + * Cleanup + */ +static int s3c2410fb_remove(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct fb_info *fbinfo = dev_get_drvdata(dev); + struct s3c2410fb_info *info = fbinfo->par; + int irq; + + s3c2410fb_stop_lcd(); + msleep(1); + + s3c2410fb_unmap_video_memory(info); + + if (info->clk) { + clk_disable(info->clk); + clk_unuse(info->clk); + clk_put(info->clk); + info->clk = NULL; + } + + irq = platform_get_irq(pdev, 0); + free_irq(irq,info); + release_mem_region((unsigned long)S3C24XX_VA_LCD, S3C24XX_SZ_LCD); + unregister_framebuffer(fbinfo); + + return 0; +} + +#ifdef CONFIG_PM + +/* suspend and resume support for the lcd controller */ + +static int s3c2410fb_suspend(struct device *dev, pm_message_t state, u32 level) +{ + struct fb_info *fbinfo = dev_get_drvdata(dev); + struct s3c2410fb_info *info = fbinfo->par; + + if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN) { + s3c2410fb_stop_lcd(); + + /* sleep before disabling the clock, we need to ensure + * the LCD DMA engine is not going to get back on the bus + * before the clock goes off again (bjd) */ + + msleep(1); + clk_disable(info->clk); + } + + return 0; +} + +static int s3c2410fb_resume(struct device *dev, u32 level) +{ + struct fb_info *fbinfo = dev_get_drvdata(dev); + struct s3c2410fb_info *info = fbinfo->par; + + if (level == RESUME_ENABLE) { + clk_enable(info->clk); + msleep(1); + + s3c2410fb_init_registers(info); + + } + + return 0; +} + +#else +#define s3c2410fb_suspend NULL +#define s3c2410fb_resume NULL +#endif + +static struct device_driver s3c2410fb_driver = { + .name = "s3c2410-lcd", + .bus = &platform_bus_type, + .probe = s3c2410fb_probe, + .suspend = s3c2410fb_suspend, + .resume = s3c2410fb_resume, + .remove = s3c2410fb_remove +}; + +int __devinit s3c2410fb_init(void) +{ + return driver_register(&s3c2410fb_driver); +} + +static void __exit s3c2410fb_cleanup(void) +{ + driver_unregister(&s3c2410fb_driver); +} + + +module_init(s3c2410fb_init); +module_exit(s3c2410fb_cleanup); + +MODULE_AUTHOR("Arnaud Patard , Ben Dooks "); +MODULE_DESCRIPTION("Framebuffer driver for the s3c2410"); +MODULE_LICENSE("GPL"); diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h new file mode 100644 index 000000000000..be40968f899e --- /dev/null +++ b/drivers/video/s3c2410fb.h @@ -0,0 +1,56 @@ +/* + * linux/drivers/s3c2410fb.h + * Copyright (c) Arnaud Patard + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + * + * S3C2410 LCD Controller Frame Buffer Driver + * based on skeletonfb.c, sa1100fb.h + * + * ChangeLog + * + * 2004-12-04: Arnaud Patard + * - Moved dprintk to s3c2410fb.c + * + * 2004-09-07: Arnaud Patard + * - Renamed from h1940fb.h to s3c2410fb.h + * - Chenged h1940 to s3c2410 + * + * 2004-07-15: Arnaud Patard + * - First version + */ + +#ifndef __S3C2410FB_H +#define __S3C2410FB_H + +struct s3c2410fb_info { + struct fb_info *fb; + struct device *dev; + struct clk *clk; + + struct s3c2410fb_mach_info *mach_info; + + /* raw memory addresses */ + dma_addr_t map_dma; /* physical */ + u_char * map_cpu; /* virtual */ + u_int map_size; + + struct s3c2410fb_hw regs; + + /* addresses of pieces placed in raw buffer */ + u_char * screen_cpu; /* virtual address of buffer */ + dma_addr_t screen_dma; /* physical address of buffer */ + unsigned int palette_ready; + + /* keep these registers in case we need to re-write palette */ + u32 palette_buffer[256]; + u32 pseudo_pal[16]; +}; + +#define PALETTE_BUFF_CLEAR (0x80000000) /* entry is clear/invalid */ + +int s3c2410fb_init(void); + +#endif diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h new file mode 100644 index 000000000000..ac57bc887d82 --- /dev/null +++ b/include/asm-arm/arch-s3c2410/fb.h @@ -0,0 +1,69 @@ +/* linux/include/asm/arch-s3c2410/fb.h + * + * Copyright (c) 2004 Arnaud Patard + * + * Inspired by pxafb.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * Changelog: + * 07-Sep-2004 RTP Created file + * 03-Nov-2004 BJD Updated and minor cleanups + * 03-Aug-2005 RTP Renamed to fb.h +*/ + +#ifndef __ASM_ARM_FB_H +#define __ASM_ARM_FB_H + +#include + +struct s3c2410fb_val { + unsigned int defval; + unsigned int min; + unsigned int max; +}; + +struct s3c2410fb_hw { + unsigned long lcdcon1; + unsigned long lcdcon2; + unsigned long lcdcon3; + unsigned long lcdcon4; + unsigned long lcdcon5; +}; + +struct s3c2410fb_mach_info { + unsigned char fixed_syncs; /* do not update sync/border */ + + /* Screen size */ + int width; + int height; + + /* Screen info */ + struct s3c2410fb_val xres; + struct s3c2410fb_val yres; + struct s3c2410fb_val bpp; + + /* lcd configuration registers */ + struct s3c2410fb_hw regs; + + /* GPIOs */ + + unsigned long gpcup; + unsigned long gpcup_mask; + unsigned long gpccon; + unsigned long gpccon_mask; + unsigned long gpdup; + unsigned long gpdup_mask; + unsigned long gpdcon; + unsigned long gpdcon_mask; + + /* lpc3600 control register */ + unsigned long lpcsel; +}; + +void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info); + +#endif /* __ASM_ARM_FB_H */ diff --git a/include/asm-arm/arch-s3c2410/regs-lcd.h b/include/asm-arm/arch-s3c2410/regs-lcd.h index 7f882ea92b2a..b6b1b4e8bbeb 100644 --- a/include/asm-arm/arch-s3c2410/regs-lcd.h +++ b/include/asm-arm/arch-s3c2410/regs-lcd.h @@ -51,21 +51,32 @@ #define S3C2410_LCDCON1_ENVID (1) +#define S3C2410_LCDCON1_MODEMASK 0x1E + #define S3C2410_LCDCON2_VBPD(x) ((x) << 24) #define S3C2410_LCDCON2_LINEVAL(x) ((x) << 14) #define S3C2410_LCDCON2_VFPD(x) ((x) << 6) #define S3C2410_LCDCON2_VSPW(x) ((x) << 0) +#define S3C2410_LCDCON2_GET_VBPD(x) ( ((x) >> 24) & 0xFF) +#define S3C2410_LCDCON2_GET_VFPD(x) ( ((x) >> 6) & 0xFF) +#define S3C2410_LCDCON2_GET_VSPW(x) ( ((x) >> 0) & 0x3F) + #define S3C2410_LCDCON3_HBPD(x) ((x) << 19) #define S3C2410_LCDCON3_WDLY(x) ((x) << 19) #define S3C2410_LCDCON3_HOZVAL(x) ((x) << 8) #define S3C2410_LCDCON3_HFPD(x) ((x) << 0) #define S3C2410_LCDCON3_LINEBLANK(x)((x) << 0) +#define S3C2410_LCDCON3_GET_HBPD(x) ( ((x) >> 19) & 0x7F) +#define S3C2410_LCDCON3_GET_HFPD(x) ( ((x) >> 0) & 0xFF) + #define S3C2410_LCDCON4_MVAL(x) ((x) << 8) #define S3C2410_LCDCON4_HSPW(x) ((x) << 0) #define S3C2410_LCDCON4_WLH(x) ((x) << 0) +#define S3C2410_LCDCON4_GET_HSPW(x) ( ((x) >> 0) & 0xFF) + #define S3C2410_LCDCON5_BPP24BL (1<<12) #define S3C2410_LCDCON5_FRM565 (1<<11) #define S3C2410_LCDCON5_INVVCLK (1<<10) @@ -100,10 +111,16 @@ #define S3C2410_DITHMODE S3C2410_LCDREG(0x4C) #define S3C2410_TPAL S3C2410_LCDREG(0x50) +#define S3C2410_TPAL_EN (1<<24) + /* interrupt info */ #define S3C2410_LCDINTPND S3C2410_LCDREG(0x54) #define S3C2410_LCDSRCPND S3C2410_LCDREG(0x58) #define S3C2410_LCDINTMSK S3C2410_LCDREG(0x5C) +#define S3C2410_LCDINT_FIWSEL (1<<2) +#define S3C2410_LCDINT_FRSYNC (1<<1) +#define S3C2410_LCDINT_FICNT (1<<0) + #define S3C2410_LPCSEL S3C2410_LCDREG(0x60) #define S3C2410_TFTPAL(x) S3C2410_LCDREG((0x400 + (x)*4))