dt-bindings:iio:dac:adi,ad5758 yaml conversion
I have put Michael as maintainer on this one. Happy to change it to someone else though. One issue in here, is I cannot have an example with a negative limit on the range. There are very few such yaml bindings in existence but the thermal-zones.yaml has the same problem. If there is any means of fixing this let me know. For now I'm sticking to positive range values in the example. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Rob Herring <robh@kernel.org> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Link: https://lore.kernel.org/r/20201031134110.724233-24-jic23@kernel.org
This commit is contained in:
Jonathan Cameron
parent
c15058d5fb
commit
1e6536ee34
@ -1,83 +0,0 @@
|
||||
Analog Devices AD5758 DAC device driver
|
||||
|
||||
Required properties for the AD5758:
|
||||
- compatible: Must be "adi,ad5758"
|
||||
- reg: SPI chip select number for the device
|
||||
- spi-max-frequency: Max SPI frequency to use (< 50000000)
|
||||
- spi-cpha: is the only mode that is supported
|
||||
|
||||
Required properties:
|
||||
|
||||
- adi,dc-dc-mode: Mode of operation of the dc-to-dc converter
|
||||
Dynamic Power Control (DPC)
|
||||
In this mode, the AD5758 circuitry senses the output
|
||||
voltage and dynamically regulates the supply voltage,
|
||||
VDPC+, to meet compliance requirements plus an optimized
|
||||
headroom voltage for the output buffer.
|
||||
|
||||
Programmable Power Control (PPC)
|
||||
In this mode, the VDPC+ voltage is user-programmable to
|
||||
a fixed level that needs to accommodate the maximum output
|
||||
load required.
|
||||
|
||||
The output of the DAC core is either converted to a
|
||||
current or voltage output at the VIOUT pin. Only one mode
|
||||
can be enabled at any one time.
|
||||
|
||||
The following values are currently supported:
|
||||
* 1: DPC current mode
|
||||
* 2: DPC voltage mode
|
||||
* 3: PPC current mode
|
||||
|
||||
Depending on the selected output mode (voltage or current) one of the
|
||||
two properties must
|
||||
be present:
|
||||
|
||||
- adi,range-microvolt: Voltage output range
|
||||
The array of voltage output ranges must contain two fields:
|
||||
* <0 5000000>: 0 V to 5 V voltage range
|
||||
* <0 10000000>: 0 V to 10 V voltage range
|
||||
* <(-5000000) 5000000>: ±5 V voltage range
|
||||
* <(-10000000) 10000000>: ±10 V voltage range
|
||||
- adi,range-microamp: Current output range
|
||||
The array of current output ranges must contain two fields:
|
||||
* <0 20000>: 0 mA to 20 mA current range
|
||||
* <0 24000>: 0 mA to 24 mA current range
|
||||
* <4 24000>: 4 mA to 20 mA current range
|
||||
* <(-20000) 20000>: ±20 mA current range
|
||||
* <(-24000) 24000>: ±24 mA current range
|
||||
* <(-1000) 22000>: −1 mA to +22 mA current range
|
||||
|
||||
Optional properties:
|
||||
|
||||
- reset-gpios : GPIO spec for the RESET pin. If specified, it will be
|
||||
asserted during driver probe.
|
||||
|
||||
- adi,dc-dc-ilim-microamp: The dc-to-dc converter current limit
|
||||
The following values are currently supported [uA]:
|
||||
* 150000
|
||||
* 200000
|
||||
* 250000
|
||||
* 300000
|
||||
* 350000
|
||||
* 400000
|
||||
|
||||
- adi,slew-time-us: The time it takes for the output to reach the
|
||||
full scale [uS]
|
||||
The supported range is between 133us up to 1023984375us
|
||||
|
||||
AD5758 Example:
|
||||
|
||||
dac@0 {
|
||||
compatible = "adi,ad5758";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cpha;
|
||||
|
||||
reset-gpios = <&gpio 22 0>;
|
||||
|
||||
adi,dc-dc-mode = <2>;
|
||||
adi,range-microvolt = <0 10000000>;
|
||||
adi,dc-dc-ilim-microamp = <200000>;
|
||||
adi,slew-time-us = <125000>;
|
||||
};
|
||||
129
Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
Normal file
129
Documentation/devicetree/bindings/iio/dac/adi,ad5758.yaml
Normal file
@ -0,0 +1,129 @@
|
||||
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/iio/dac/adi,ad5758.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Analog Devices AD5758 DAC
|
||||
|
||||
maintainers:
|
||||
- Michael Hennerich <Michael.Hennerich@analog.com>
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: adi,ad5758
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
spi-max-frequency: true
|
||||
spi-cpha: true
|
||||
|
||||
adi,dc-dc-mode:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [1, 2, 3]
|
||||
description: |
|
||||
Mode of operation of the dc-to-dc converter
|
||||
Dynamic Power Control (DPC)
|
||||
In this mode, the AD5758 circuitry senses the output voltage and
|
||||
dynamically regulates the supply voltage, VDPC+, to meet compliance
|
||||
requirements plus an optimized headroom voltage for the output buffer.
|
||||
|
||||
Programmable Power Control (PPC)
|
||||
In this mode, the VDPC+ voltage is user-programmable to a fixed level
|
||||
that needs to accommodate the maximum output load required.
|
||||
|
||||
The output of the DAC core is either converted to a current or
|
||||
voltage output at the VIOUT pin. Only one mode can be enabled at
|
||||
any one time.
|
||||
|
||||
The following values are currently supported:
|
||||
* 1: DPC current mode
|
||||
* 2: DPC voltage mode
|
||||
* 3: PPC current mode
|
||||
|
||||
Depending on the selected output mode (voltage or current) one of the
|
||||
two properties must be present:
|
||||
|
||||
adi,range-microvolt:
|
||||
$ref: /schemas/types.yaml#/definitions/int32-array
|
||||
description: |
|
||||
Voltage output range specified as <minimum, maximum>
|
||||
enum:
|
||||
- [[0, 5000000]]
|
||||
- [[0, 10000000]]
|
||||
- [[-5000000, 5000000]]
|
||||
- [[-10000000, 10000000]]
|
||||
|
||||
adi,range-microamp:
|
||||
$ref: /schemas/types.yaml#/definitions/int32-array
|
||||
description: |
|
||||
Current output range specified as <minimum, maximum>
|
||||
enum:
|
||||
- [[0, 20000]]
|
||||
- [[0, 24000]]
|
||||
- [[4, 24000]]
|
||||
- [[-20000, 20000]]
|
||||
- [[-24000, 24000]]
|
||||
- [[-1000, 22000]]
|
||||
|
||||
reset-gpios: true
|
||||
|
||||
adi,dc-dc-ilim-microamp:
|
||||
$ref: /schemas/types.yaml#/definitions/uint32
|
||||
enum: [150000, 200000, 250000, 300000, 350000, 400000]
|
||||
description: |
|
||||
The dc-to-dc converter current limit.
|
||||
|
||||
adi,slew-time-us:
|
||||
description: |
|
||||
The time it takes for the output to reach the full scale [uS]
|
||||
minimum: 133
|
||||
maximum: 1023984375
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- spi-cpha
|
||||
- adi,dc-dc-mode
|
||||
|
||||
allOf:
|
||||
- if:
|
||||
properties:
|
||||
adi,dc-dc-mode:
|
||||
contains:
|
||||
enum: [1, 3]
|
||||
then:
|
||||
properties:
|
||||
adi,range-microvolt: false
|
||||
required:
|
||||
- adi,range-microamp
|
||||
else:
|
||||
properties:
|
||||
adi,range-microamp: false
|
||||
required:
|
||||
- adi,range-microvolt
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
spi {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
dac@0 {
|
||||
compatible = "adi,ad5758";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <1000000>;
|
||||
spi-cpha;
|
||||
|
||||
reset-gpios = <&gpio 22 0>;
|
||||
|
||||
adi,dc-dc-mode = <2>;
|
||||
adi,range-microvolt = <0 10000000>;
|
||||
adi,dc-dc-ilim-microamp = <200000>;
|
||||
adi,slew-time-us = <125000>;
|
||||
};
|
||||
};
|
||||
...
|
||||
Loading…
Reference in New Issue
Block a user