leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

[Blackfin] arch: Support for CPU_FREQ and NOHZ

Browse Source 
Singed-off-by: Vitja Makarov <vitja.makarov@gmail.com>
This commit is contained in:
Vitja Makarov 2008-05-07 11:41:26 +08:00 committed by Bryan Wu
parent 14b03204c8
commit 1bfb4b21c7
3 changed files with 26 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
arch/blackfin/kernel/time-ts.c
View File

@ -60,7 +60,7 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc)
static cycle_t read_cycles(void)
{
return get_cycles();
return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
}
unsigned long long sched_clock(void)
@ -117,7 +117,7 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
break;
}
case CLOCK_EVT_MODE_ONESHOT:
bfin_write_TSCALE(0);
bfin_write_TSCALE(TIME_SCALE - 1);
bfin_write_TCOUNT(0);
bfin_write_TCNTL(TMPWR | TMREN);
CSYNC();
@ -183,10 +183,14 @@ irqreturn_t timer_interrupt(int irq, void *dev_id)
static int __init bfin_clockevent_init(void)
{
unsigned long timer_clk;
timer_clk = get_cclk() / TIME_SCALE;
setup_irq(IRQ_CORETMR, &bfin_timer_irq);
bfin_timer_init();
clockevent_bfin.mult = div_sc(get_cclk(), NSEC_PER_SEC, clockevent_bfin.shift);
clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift);
clockevent_bfin.max_delta_ns = clockevent_delta2ns(-1, &clockevent_bfin);
clockevent_bfin.min_delta_ns = clockevent_delta2ns(100, &clockevent_bfin);
clockevents_register_device(&clockevent_bfin);

24
arch/blackfin/mach-common/cpufreq.c
View File

@ -62,6 +62,14 @@ static struct bfin_dpm_state {
unsigned int tscale; /* change the divider on the core timer interrupt */
} dpm_state_table[3];
/*
normalized to maximum frequncy offset for CYCLES,
used in time-ts cycles clock source, but could be used
somewhere also.
*/
unsigned long long __bfin_cycles_off;
unsigned int __bfin_cycles_mod;
/**************************************************************************/
static unsigned int bfin_getfreq(unsigned int cpu)
@ -80,6 +88,7 @@ static int bfin_target(struct cpufreq_policy *policy,
unsigned int index, plldiv, tscale;
unsigned long flags, cclk_hz;
struct cpufreq_freqs freqs;
cycles_t cycles;
if (cpufreq_frequency_table_target(policy, bfin_freq_table,
target_freq, relation, &index))
@ -101,8 +110,14 @@ static int bfin_target(struct cpufreq_policy *policy,
bfin_write_PLL_DIV(plldiv);
/* we have to adjust the core timer, because it is using cclk */
bfin_write_TSCALE(tscale);
cycles = get_cycles();
SSYNC();
cycles += 10; /* ~10 cycles we loose after get_cycles() */
__bfin_cycles_off += (cycles << __bfin_cycles_mod) - (cycles << index);
__bfin_cycles_mod = index;
local_irq_restore(flags);
/* TODO: just test case for cycles clock source, remove later */
pr_debug("cpufreq: done\n");
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return 0;
@ -119,15 +134,6 @@ static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
unsigned long cclk, sclk, csel, min_cclk;
int index;
#ifdef CONFIG_CYCLES_CLOCKSOURCE
/*
* Clocksource CYCLES is still CONTINUOUS but not longer with a constant tick rate in case we enable
* CPU frequency scaling, since CYCLES runs off Core Clock.
*/
printk(KERN_WARNING "CPU frequency scaling not supported: Clocksource not suitable\n"
return -ENODEV;
#endif
if (policy->cpu != 0)
return -EINVAL;

4
include/asm-blackfin/time.h
View File

@ -24,6 +24,8 @@
#ifndef CONFIG_CPU_FREQ
#define TIME_SCALE 1
#define __bfin_cycles_off (0)
#define __bfin_cycles_mod (0)
#else
/*
* Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 .
@ -31,6 +33,8 @@
* adjust the Core Timer Presale Register. This way we don't lose time.
*/
#define TIME_SCALE 4
extern unsigned long long __bfin_cycles_off;
extern unsigned int __bfin_cycles_mod;
#endif
#endif