forked from Minki/linux
ARM: dts: add the CLCD LCD display to the NHK15
This adds the TPG110 TDO43MTEA2 24-bit RGB LCD panel and sets up the Nomadik device tree to activate the CLCD and connect it to this panel. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
parent
6fb2de9d9f
commit
17470b7da1
@ -176,6 +176,50 @@
|
||||
};
|
||||
|
||||
amba {
|
||||
clcd@10120000 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&clcd_24bit_mux>;
|
||||
port {
|
||||
nomadik_clcd_pads: endpoint {
|
||||
remote-endpoint = <&nomadik_clcd_panel>;
|
||||
arm,pl11x,tft-r0g0b0-pads = <16 8 0>;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* WVGA connector 21
|
||||
* WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB
|
||||
* with TPO touch screen.
|
||||
*/
|
||||
panel {
|
||||
compatible = "tpo,tpg110", "panel-dpi";
|
||||
grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>;
|
||||
scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
|
||||
sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
||||
backlight = <&bl>;
|
||||
|
||||
port {
|
||||
nomadik_clcd_panel: endpoint {
|
||||
remote-endpoint = <&nomadik_clcd_pads>;
|
||||
};
|
||||
};
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <33200000>;
|
||||
hactive = <800>;
|
||||
hback-porch = <216>;
|
||||
hfront-porch = <40>;
|
||||
hsync-len = <1>;
|
||||
vactive = <480>;
|
||||
vback-porch = <35>;
|
||||
vfront-porch = <10>;
|
||||
vsync-len = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Activate RX/TX and CTS/RTS on UART 0 */
|
||||
uart0: uart@101fd000 {
|
||||
pinctrl-names = "default";
|
||||
|
@ -166,6 +166,18 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
clcd {
|
||||
/*
|
||||
* This should be activated to use the additional
|
||||
* 8 lines for bits 16 thru 23 from the CLCD block.
|
||||
*/
|
||||
clcd_24bit_mux: clcd_mux {
|
||||
clcd_24bit_mux {
|
||||
function = "clcd";
|
||||
groups = "clcd_16_23_b_1";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Power Management Unit */
|
||||
@ -732,6 +744,16 @@
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
clcd@10120000 {
|
||||
compatible = "arm,pl110", "arm,primecell";
|
||||
reg = <0x10120000 0x1000>;
|
||||
interrupt-names = "combined";
|
||||
interrupts = <14>;
|
||||
clocks = <&clcdclk>, <&hclkclcd>;
|
||||
clock-names = "clcdclk", "apb_pclk";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
vica: intc@10140000 {
|
||||
compatible = "arm,versatile-vic";
|
||||
interrupt-controller;
|
||||
|
Loading…
Reference in New Issue
Block a user