forked from Minki/linux
gpio: samsung: add devicetree init for s3c24xx arches
Until now the EXYNOS-SoC was the only Samsung-SoC supporting the GPIOs via the device tree. This patch implements dt-support for the s3c24xx arches. The controllers contain only 3 cells, as the underlying gpio controller does not support controlling the drive strength on a gpio level. Tested with the gpio-keys driver on a s3c2416 based machine. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Thomas Abraham <thomas.abraham@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> [kgene.kim@samsung.com: fixed build error] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
This commit is contained in:
parent
4cbe5a555f
commit
172c6a1365
@ -39,3 +39,46 @@ Example:
|
||||
#gpio-cells = <4>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
||||
|
||||
Samsung S3C24XX GPIO Controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Compatible property value should be "samsung,s3c24xx-gpio".
|
||||
|
||||
- reg: Physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
|
||||
- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes
|
||||
should be the following with values derived from the SoC user manual.
|
||||
<[phandle of the gpio controller node]
|
||||
[pin number within the gpio controller]
|
||||
[mux function]
|
||||
[flags and pull up/down]
|
||||
|
||||
Values for gpio specifier:
|
||||
- Pin number: depending on the controller a number from 0 up to 15.
|
||||
- Mux function: Depending on the SoC and the gpio bank the gpio can be set
|
||||
as input, output or a special function
|
||||
- Flags and Pull Up/Down: the values to use differ for the individual SoCs
|
||||
example S3C2416/S3C2450:
|
||||
0 - Pull Up/Down Disabled.
|
||||
1 - Pull Down Enabled.
|
||||
2 - Pull Up Enabled.
|
||||
Bit 16 (0x00010000) - Input is active low.
|
||||
Consult the user manual for the correct values of Mux and Pull Up/Down.
|
||||
|
||||
- gpio-controller: Specifies that the node is a gpio controller.
|
||||
- #address-cells: should be 1.
|
||||
- #size-cells: should be 1.
|
||||
|
||||
Example:
|
||||
|
||||
gpa: gpio-controller@56000000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "samsung,s3c24xx-gpio";
|
||||
reg = <0x56000000 0x10>;
|
||||
#gpio-cells = <3>;
|
||||
gpio-controller;
|
||||
};
|
||||
|
@ -938,6 +938,67 @@ static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip)
|
||||
s3c_gpiolib_track(chip);
|
||||
}
|
||||
|
||||
#if defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF)
|
||||
static int s3c24xx_gpio_xlate(struct gpio_chip *gc,
|
||||
const struct of_phandle_args *gpiospec, u32 *flags)
|
||||
{
|
||||
unsigned int pin;
|
||||
|
||||
if (WARN_ON(gc->of_gpio_n_cells < 3))
|
||||
return -EINVAL;
|
||||
|
||||
if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
|
||||
return -EINVAL;
|
||||
|
||||
if (gpiospec->args[0] > gc->ngpio)
|
||||
return -EINVAL;
|
||||
|
||||
pin = gc->base + gpiospec->args[0];
|
||||
|
||||
if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(gpiospec->args[1])))
|
||||
pr_warn("gpio_xlate: failed to set pin function\n");
|
||||
if (s3c_gpio_setpull(pin, gpiospec->args[2] & 0xffff))
|
||||
pr_warn("gpio_xlate: failed to set pin pull up/down\n");
|
||||
|
||||
if (flags)
|
||||
*flags = gpiospec->args[2] >> 16;
|
||||
|
||||
return gpiospec->args[0];
|
||||
}
|
||||
|
||||
static const struct of_device_id s3c24xx_gpio_dt_match[] __initdata = {
|
||||
{ .compatible = "samsung,s3c24xx-gpio", },
|
||||
{}
|
||||
};
|
||||
|
||||
static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
|
||||
u64 base, u64 offset)
|
||||
{
|
||||
struct gpio_chip *gc = &chip->chip;
|
||||
u64 address;
|
||||
|
||||
if (!of_have_populated_dt())
|
||||
return;
|
||||
|
||||
address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
|
||||
gc->of_node = of_find_matching_node_by_address(NULL,
|
||||
s3c24xx_gpio_dt_match, address);
|
||||
if (!gc->of_node) {
|
||||
pr_info("gpio: device tree node not found for gpio controller"
|
||||
" with base address %08llx\n", address);
|
||||
return;
|
||||
}
|
||||
gc->of_gpio_n_cells = 3;
|
||||
gc->of_xlate = s3c24xx_gpio_xlate;
|
||||
}
|
||||
#else
|
||||
static __init void s3c24xx_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
|
||||
u64 base, u64 offset)
|
||||
{
|
||||
return;
|
||||
}
|
||||
#endif /* defined(CONFIG_PLAT_S3C24XX) && defined(CONFIG_OF) */
|
||||
|
||||
static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
|
||||
int nr_chips, void __iomem *base)
|
||||
{
|
||||
@ -962,6 +1023,8 @@ static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip,
|
||||
gc->direction_output = samsung_gpiolib_2bit_output;
|
||||
|
||||
samsung_gpiolib_add(chip);
|
||||
|
||||
s3c24xx_gpiolib_attach_ofnode(chip, S3C24XX_PA_GPIO, i * 0x10);
|
||||
}
|
||||
}
|
||||
|
||||
|
Loading…
Reference in New Issue
Block a user