forked from Minki/linux
Changes to add dra7 PMU, display support for cm-t54, misc
changes needed for omap3 boards for device tree support. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJUGztXAAoJEBvUPslcq6VzvYQP/RAqIs92dr8Xd0bhqUeIjnBC 6tUjBowX1MvpeW9vkN6omBICzVnkZeuwTSLVYIeQlJQ0KH86Z8kMjcTVrBs9JPaZ KL71sw6TSf55Ljyb5ODwKDcErd45Vc3JrWmNCjk6yQAxWxmr5/IyEN/FIpVhxu5P vvTT1G9HmBdJOBc3FlHy2qdygnhOQHWZI4L3GMiDtJID1MJGIwm/rvniqG83qTlO 5CbjY+AUcoTD2Ggt6IkWIarbgcTe8cTKKHvC0kw5l89VssVLVL4T47r9TgOQGsK4 PpaCqkmcMGe0A3JSTZ+viCAbGVBmblakUpAugpk5cynz0IX1N2PHy1kAlP3v8g8j Oj4AJMgwa9gVXQb9ZOqyisjT6GlUwouWgioAg8+xouFpkQNyvkTnR8NZiupgzIN4 CbPqLT8si1BUNQzbqvgTUmCyrlvdjc872XeAeKKiirXXp0ujYLBCe4RDKudyJLkE Ve+pjE3G0rYYXjlQivZyIQk+KVxrr0VjZiXHqLEO33bPp9YTBBjNQ/SYX6UQyTWC yXNLLD7iS9kTKDCv/p5Jg/1fr6EVkITyIMKSzOhdosNgKhFTpLflrKXf9mkPtBdV qQm62bFGIgpNnb/jIc0+gXcMlmSQYZdp5v2DkW7zaodFee99sm7XN9fFpYq1E8Q3 3PFerwHRAxfnoOWW3VFA =7kOC -----END PGP SIGNATURE----- Merge tag 'dt-part2-v2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "part 2 of omap dts changes" from Tony Lindgren: Changes to add dra7 PMU, display support for cm-t54, misc changes needed for omap3 boards for device tree support. Signed-off-by: Arnd Bergmann <arnd@arndb.de> * tag 'dt-part2-v2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: DRA7: Add PMU nodes ARM: dts: cm-t54: setup omap_dwc3 ARM: dts: cm-t54: add ADS7846 touchscreen support ARM: dts: cm-t54: add Startek LCD support ARM: dts: cm-t54: add HDMI/DVI display data ARM: dts: cm-t54: fix mux mode comment style ARM: dts: sbc-t54: fix mux mode comment style ARM: dts: Enable PMIC idle configuration for LDP ARM: dts: Add support for Ethernet on some N900 macro boards ARM: dts: Do not set pulls for I2C lines ARM: dts: omap: Remove WAKEUPENABLE mux options for UARTs ARM: dts: omap3-overo: Fix UART wake-up events
This commit is contained in:
Arnd Bergmann
commit
16529509a5
@ -22,4 +22,9 @@
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a15-pmu";
|
||||
interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -38,4 +38,10 @@
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a15-pmu";
|
||||
interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -174,8 +174,8 @@
|
||||
|
||||
uart3_pins: pinmux_uart3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
||||
0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
|
||||
0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
||||
0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */
|
||||
>;
|
||||
};
|
||||
|
||||
|
||||
@ -159,6 +159,11 @@
|
||||
reg = <0x48>;
|
||||
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
twl_power: power {
|
||||
compatible = "ti,twl4030-power-idle";
|
||||
ti,use_poweroff;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -134,24 +134,32 @@
|
||||
>;
|
||||
};
|
||||
|
||||
ethernet_pins: pinmux_ethernet_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
|
||||
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */
|
||||
OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c1_pins: pinmux_i2c1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x18a (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
|
||||
0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
|
||||
0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
|
||||
0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c2_pins: pinmux_i2c2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x18e (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
|
||||
0x190 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
|
||||
0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
|
||||
0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c3_pins: pinmux_i2c3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x192 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
|
||||
0x194 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
|
||||
0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl */
|
||||
0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
@ -578,6 +586,8 @@
|
||||
|
||||
&gpmc {
|
||||
ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
|
||||
ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
|
||||
<1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
|
||||
|
||||
/* gpio-irq for dma: 65 */
|
||||
|
||||
@ -646,6 +656,38 @@
|
||||
reg = <0x004c0000 0x0fb40000>;
|
||||
};
|
||||
};
|
||||
|
||||
ethernet@gpmc {
|
||||
compatible = "smsc,lan91c94";
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
|
||||
reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */
|
||||
bank-width = <2>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <ðernet_pins>;
|
||||
gpmc,device-width = <2>;
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <48>;
|
||||
gpmc,cs-wr-off-ns = <24>;
|
||||
gpmc,adv-on-ns = <0>;
|
||||
gpmc,adv-rd-off-ns = <0>;
|
||||
gpmc,adv-wr-off-ns = <0>;
|
||||
gpmc,we-on-ns = <12>;
|
||||
gpmc,we-off-ns = <18>;
|
||||
gpmc,oe-on-ns = <12>;
|
||||
gpmc,oe-off-ns = <48>;
|
||||
gpmc,page-burst-access-ns = <0>;
|
||||
gpmc,access-ns = <42>;
|
||||
gpmc,rd-cycle-ns = <180>;
|
||||
gpmc,wr-cycle-ns = <180>;
|
||||
gpmc,bus-turnaround-ns = <0>;
|
||||
gpmc,cycle2cycle-delay-ns = <0>;
|
||||
gpmc,wait-monitoring-ns = <0>;
|
||||
gpmc,clk-activation-ns = <0>;
|
||||
gpmc,wr-access-ns = <0>;
|
||||
gpmc,wr-data-mux-bus-ns = <12>;
|
||||
};
|
||||
};
|
||||
|
||||
&mcspi1 {
|
||||
|
||||
@ -36,8 +36,8 @@
|
||||
|
||||
uart3_pins: pinmux_uart3_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
||||
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
|
||||
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
||||
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
|
||||
>;
|
||||
};
|
||||
};
|
||||
@ -88,6 +88,7 @@
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins>;
|
||||
};
|
||||
|
||||
@ -16,6 +16,12 @@
|
||||
reg = <0x80000000 0x7F000000>; /* 2048 MB */
|
||||
};
|
||||
|
||||
aliases {
|
||||
display0 = &hdmi0;
|
||||
display1 = &dvi0;
|
||||
display2 = &lcd0;
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixed-regulator-mmcsd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
@ -45,6 +51,13 @@
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
ads7846reg: ads7846-reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "ads7846-reg";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
/* HS USB Host PHY on PORT 2 */
|
||||
hsusb2_phy: hsusb2_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
@ -66,6 +79,105 @@
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
lcd0: display {
|
||||
compatible = "startek,startek-kd050c", "panel-dpi";
|
||||
label = "lcd";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_pins>;
|
||||
|
||||
enable-gpios = <&gpio8 3 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <33000000>;
|
||||
hactive = <800>;
|
||||
vactive = <480>;
|
||||
hfront-porch = <40>;
|
||||
hback-porch = <40>;
|
||||
hsync-len = <43>;
|
||||
vback-porch = <29>;
|
||||
vfront-porch = <13>;
|
||||
vsync-len = <3>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
|
||||
port {
|
||||
lcd_in: endpoint {
|
||||
remote-endpoint = <&dpi_lcd_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi0: connector@0 {
|
||||
compatible = "hdmi-connector";
|
||||
label = "hdmi";
|
||||
|
||||
type = "a";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_conn_pins>;
|
||||
|
||||
hpd-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
tfp410: encoder@0 {
|
||||
compatible = "ti,tfp410";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tfp410_in: endpoint@0 {
|
||||
remote-endpoint = <&dpi_dvi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
tfp410_out: endpoint@0 {
|
||||
remote-endpoint = <&dvi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dvi0: connector@1 {
|
||||
compatible = "dvi-connector";
|
||||
label = "dvi";
|
||||
|
||||
digital;
|
||||
|
||||
ddc-i2c-bus = <&i2c2>;
|
||||
|
||||
port {
|
||||
dvi_connector_in: endpoint {
|
||||
remote-endpoint = <&tfp410_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&omap5_pmx_wkup {
|
||||
|
||||
ads7846_pins: pinmux_ads7846_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x02 (PIN_INPUT_PULLDOWN | MUX_MODE6) /* llib_wakereqin.gpio1_wk15 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap5_pmx_core {
|
||||
@ -88,6 +200,13 @@
|
||||
>;
|
||||
};
|
||||
|
||||
i2c2_pins: pinmux_i2c2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_IOPAD(0x01b8, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
|
||||
OMAP5_IOPAD(0x01ba, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_IOPAD(0x01e2, PIN_INPUT_PULLUP | MUX_MODE0) /* sdcard_clk */
|
||||
@ -127,8 +246,8 @@
|
||||
|
||||
wlan_gpios_pins: pinmux_wlan_gpios_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_109 */
|
||||
OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* gpio4_110 */
|
||||
OMAP5_IOPAD(0x019c, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_ul_data.gpio4_109 */
|
||||
OMAP5_IOPAD(0x019e, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* abemcpdm_dl_data.gpio4_110 */
|
||||
>;
|
||||
};
|
||||
|
||||
@ -144,6 +263,104 @@
|
||||
OMAP5_IOPAD(0x00b6, PIN_OUTPUT | MUX_MODE6) /* hsi2_acdata.gpio3_83 */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_hdmi_pins: pinmux_dss_hdmi_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_IOPAD(0x013c, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec */
|
||||
OMAP5_IOPAD(0x0140, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl */
|
||||
OMAP5_IOPAD(0x0142, PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
lcd_pins: pinmux_lcd_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_IOPAD(0x0172, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* timer11_pwm_evt.gpio8_227 */
|
||||
>;
|
||||
};
|
||||
|
||||
hdmi_conn_pins: pinmux_hdmi_conn_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_IOPAD(0x013e, PIN_INPUT | MUX_MODE6) /* hdmi_hpd.gpio7_193 */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_dpi_pins: pinmux_dss_dpi_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_IOPAD(0x0104, PIN_OUTPUT | MUX_MODE3) /* rfbi_data15.dispc_data15 */
|
||||
OMAP5_IOPAD(0x0106, PIN_OUTPUT | MUX_MODE3) /* rfbi_data14.dispc_data14 */
|
||||
OMAP5_IOPAD(0x0108, PIN_OUTPUT | MUX_MODE3) /* rfbi_data13.dispc_data13 */
|
||||
OMAP5_IOPAD(0x010a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data12.dispc_data12 */
|
||||
OMAP5_IOPAD(0x010c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data11.dispc_data11 */
|
||||
OMAP5_IOPAD(0x010e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data10.dispc_data10 */
|
||||
OMAP5_IOPAD(0x0110, PIN_OUTPUT | MUX_MODE3) /* rfbi_data9.dispc_data9 */
|
||||
OMAP5_IOPAD(0x0112, PIN_OUTPUT | MUX_MODE3) /* rfbi_data8.dispc_data8 */
|
||||
OMAP5_IOPAD(0x0114, PIN_OUTPUT | MUX_MODE3) /* rfbi_data7.dispc_data7 */
|
||||
OMAP5_IOPAD(0x0116, PIN_OUTPUT | MUX_MODE3) /* rfbi_data6.dispc_data6 */
|
||||
OMAP5_IOPAD(0x0118, PIN_OUTPUT | MUX_MODE3) /* rfbi_data5.dispc_data5 */
|
||||
OMAP5_IOPAD(0x011a, PIN_OUTPUT | MUX_MODE3) /* rfbi_data4.dispc_data4 */
|
||||
OMAP5_IOPAD(0x011c, PIN_OUTPUT | MUX_MODE3) /* rfbi_data3.dispc_data3 */
|
||||
OMAP5_IOPAD(0x011e, PIN_OUTPUT | MUX_MODE3) /* rfbi_data2.dispc_data2 */
|
||||
OMAP5_IOPAD(0x0120, PIN_OUTPUT | MUX_MODE3) /* rfbi_data1.dispc_data1 */
|
||||
OMAP5_IOPAD(0x0122, PIN_OUTPUT | MUX_MODE3) /* rfbi_data0.dispc_data0 */
|
||||
OMAP5_IOPAD(0x0124, PIN_OUTPUT | MUX_MODE3) /* rfbi_we.dispc_vsync */
|
||||
OMAP5_IOPAD(0x0126, PIN_OUTPUT | MUX_MODE3) /* rfbi_cs0.dispc_hsync */
|
||||
OMAP5_IOPAD(0x0128, PIN_OUTPUT | MUX_MODE3) /* rfbi_a0.dispc_de */
|
||||
OMAP5_IOPAD(0x012a, PIN_OUTPUT | MUX_MODE3) /* rfbi_re.dispc_pclk */
|
||||
OMAP5_IOPAD(0x012c, PIN_OUTPUT | MUX_MODE3) /* rfbi_hsync0.dispc_data17 */
|
||||
OMAP5_IOPAD(0x012e, PIN_OUTPUT | MUX_MODE3) /* rfbi_te_vsync0.dispc_data16 */
|
||||
OMAP5_IOPAD(0x0130, PIN_OUTPUT | MUX_MODE3) /* gpio6_182.dispc_data18 */
|
||||
OMAP5_IOPAD(0x0132, PIN_OUTPUT | MUX_MODE3) /* gpio6_183.dispc_data19 */
|
||||
OMAP5_IOPAD(0x0134, PIN_OUTPUT | MUX_MODE3) /* gpio6_184.dispc_data20 */
|
||||
OMAP5_IOPAD(0x0136, PIN_OUTPUT | MUX_MODE3) /* gpio6_185.dispc_data21 */
|
||||
OMAP5_IOPAD(0x0138, PIN_OUTPUT | MUX_MODE3) /* gpio6_186.dispc_data22 */
|
||||
OMAP5_IOPAD(0x013a, PIN_OUTPUT | MUX_MODE3) /* gpio6_187.dispc_data23 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcspi2_pins: pinmux_mcspi1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_IOPAD(0x00fc, PIN_INPUT | MUX_MODE0) /* mcspi2_clk */
|
||||
OMAP5_IOPAD(0x00fe, PIN_INPUT | MUX_MODE0) /* mcspi2_simo */
|
||||
OMAP5_IOPAD(0x0100, PIN_INPUT | MUX_MODE0) /* mcspi2_somi */
|
||||
OMAP5_IOPAD(0x0102, PIN_INPUT | MUX_MODE0) /* mcspi2_cs0 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&mcspi2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi2_pins>;
|
||||
|
||||
/* touch controller */
|
||||
ads7846@0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ads7846_pins>;
|
||||
|
||||
compatible = "ti,ads7846";
|
||||
vcc-supply = <&ads7846reg>;
|
||||
|
||||
reg = <0>; /* CS0 */
|
||||
spi-max-frequency = <1500000>;
|
||||
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <15 0>; /* gpio1_wk15 */
|
||||
pendown-gpio = <&gpio1 15 0>;
|
||||
|
||||
|
||||
ti,x-min = /bits/ 16 <0x0>;
|
||||
ti,x-max = /bits/ 16 <0x0fff>;
|
||||
ti,y-min = /bits/ 16 <0x0>;
|
||||
ti,y-max = /bits/ 16 <0x0fff>;
|
||||
|
||||
ti,x-plate-ohms = /bits/ 16 <180>;
|
||||
ti,pressure-max = /bits/ 16 <255>;
|
||||
|
||||
ti,debounce-max = /bits/ 16 <30>;
|
||||
ti,debounce-tol = /bits/ 16 <10>;
|
||||
ti,debounce-rep = /bits/ 16 <1>;
|
||||
|
||||
linux,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
@ -399,6 +616,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&usbhshost {
|
||||
port2-mode = "ehci-hsic";
|
||||
port3-mode = "ehci-hsic";
|
||||
@ -408,6 +632,50 @@
|
||||
phys = <0 &hsusb2_phy &hsusb3_phy>;
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
extcon = <&extcon_usb3>;
|
||||
vbus-supply = <&smps10_out1_reg>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&smps123_reg>;
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dss_dpi_pins>;
|
||||
|
||||
port {
|
||||
dpi_dvi_out: endpoint@0 {
|
||||
remote-endpoint = <&tfp410_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
|
||||
dpi_lcd_out: endpoint@1 {
|
||||
remote-endpoint = <&lcd_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dsi2 {
|
||||
status = "ok";
|
||||
vdd-supply = <&ldo4_reg>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
status = "ok";
|
||||
vdda-supply = <&ldo4_reg>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dss_hdmi_pins>;
|
||||
|
||||
port {
|
||||
hdmi_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
lanes = <1 0 3 2 5 4 7 6>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -19,8 +19,8 @@
|
||||
|
||||
mmc1_aux_pins: pinmux_mmc1_aux_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_228 */
|
||||
OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* gpio8_229 */
|
||||
OMAP5_IOPAD(0x0174, PIN_INPUT_PULLUP | MUX_MODE6) /* timer5_pwm_evt.gpio8_228 */
|
||||
OMAP5_IOPAD(0x0176, PIN_INPUT_PULLUP | MUX_MODE6) /* timer6_pwm_evt.gpio8_229 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -252,6 +252,9 @@ static void __init nokia_n900_legacy_init(void)
|
||||
platform_device_register(&omap3_rom_rng_device);
|
||||
|
||||
}
|
||||
|
||||
/* Only on some development boards */
|
||||
gpio_request_one(164, GPIOF_OUT_INIT_LOW, "smc91x reset");
|
||||
}
|
||||
|
||||
static void __init omap3_tao3530_legacy_init(void)
|
||||
|
||||
Loading…
Reference in New Issue
Block a user