forked from Minki/linux
hwmon: (ltc2978) Add support for LTC3887
LTC3887 is an enhanced version of LTC3880 and supports the same commands. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Guenter Roeck
parent
e8047a2686
commit
15398566f0
@ -8,6 +8,7 @@ Required properties:
|
||||
* "lltc,ltc3880"
|
||||
* "lltc,ltc3882"
|
||||
* "lltc,ltc3883"
|
||||
* "lltc,ltc3887"
|
||||
* "lltc,ltm4676"
|
||||
- reg: I2C slave address
|
||||
|
||||
|
||||
@ -27,6 +27,10 @@ Supported chips:
|
||||
Prefix: 'ltc3883'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.linear.com/product/ltc3883
|
||||
* Linear Technology LTC3887
|
||||
Prefix: 'ltc3887'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.linear.com/product/ltc3887
|
||||
* Linear Technology LTM4676
|
||||
Prefix: 'ltm4676'
|
||||
Addresses scanned: -
|
||||
@ -41,7 +45,8 @@ Description
|
||||
LTC2974 is a quad digital power supply managers.
|
||||
LTC2978 is an octal power supply monitor.
|
||||
LTC2977 is a pin compatible replacement for LTC2978.
|
||||
LTC3880 and LTC3882 are dual output poly-phase step-down DC/DC controllers.
|
||||
LTC3880, LTC3882, and LTC3887 are dual output poly-phase step-down DC/DC
|
||||
controllers.
|
||||
LTC3883 is a single phase step-down DC/DC controller.
|
||||
LTM4676 is a dual 13A or single 26A uModule regulator.
|
||||
|
||||
@ -85,7 +90,7 @@ in[N]_label "vout[1-8]".
|
||||
LTC2974: N=2-5
|
||||
LTC2977: N=2-9
|
||||
LTC2978: N=2-9
|
||||
LTC3880, LTC3882, LTM4676: N=2-3
|
||||
LTC3880, LTC3882, LTC3887, LTM4676: N=2-3
|
||||
LTC3883: N=2
|
||||
in[N]_input Measured output voltage.
|
||||
in[N]_min Minimum output voltage.
|
||||
@ -105,8 +110,8 @@ temp[N]_input Measured temperature.
|
||||
and temp5 reports the chip temperature.
|
||||
On LTC2977 and LTC2978, only one temperature measurement
|
||||
is supported and reports the chip temperature.
|
||||
On LTC3880, LTC3882, and LTM4676, temp1 and temp2
|
||||
report external temperatures, and temp3 reports
|
||||
On LTC3880, LTC3882, LTC3887, and LTM4676, temp1 and
|
||||
temp2 report external temperatures, and temp3 reports
|
||||
the chip temperature.
|
||||
On LTC3883, temp1 reports an external temperature,
|
||||
and temp2 reports the chip temperature.
|
||||
@ -134,11 +139,11 @@ power[N]_label "pout[1-4]".
|
||||
LTC2974: N=1-4
|
||||
LTC2977: Not supported
|
||||
LTC2978: Not supported
|
||||
LTC3880, LTC3882, LTM4676: N=1-2
|
||||
LTC3880, LTC3882, LTC3887, LTM4676: N=1-2
|
||||
LTC3883: N=2
|
||||
power[N]_input Measured output power.
|
||||
|
||||
curr1_label "iin". LTC3880, LTC3883, and LTM4676 only.
|
||||
curr1_label "iin". LTC3880, LTC3883, LTC3887, and LTM4676 only.
|
||||
curr1_input Measured input current.
|
||||
curr1_max Maximum input current.
|
||||
curr1_max_alarm Input current high alarm.
|
||||
@ -149,7 +154,7 @@ curr[N]_label "iout[1-4]".
|
||||
LTC2974: N=1-4
|
||||
LTC2977: not supported
|
||||
LTC2978: not supported
|
||||
LTC3880, LTC3882, LTM4676: N=2-3
|
||||
LTC3880, LTC3882, LTC3887, LTM4676: N=2-3
|
||||
LTC3883: N=2
|
||||
curr[N]_input Measured output current.
|
||||
curr[N]_max Maximum output current.
|
||||
|
||||
@ -52,7 +52,8 @@ config SENSORS_LTC2978
|
||||
default n
|
||||
help
|
||||
If you say yes here you get hardware monitoring support for Linear
|
||||
Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
|
||||
Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, LTC3887,
|
||||
and LTM4676.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called ltc2978.
|
||||
|
||||
@ -1,6 +1,6 @@
|
||||
/*
|
||||
* Hardware monitoring driver for LTC2974, LTC2977, LTC2978, LTC3880,
|
||||
* LTC3883, and LTM4676
|
||||
* LTC3883, LTC3887. and LTM4676
|
||||
*
|
||||
* Copyright (c) 2011 Ericsson AB.
|
||||
* Copyright (c) 2013, 2014 Guenter Roeck
|
||||
@ -25,7 +25,8 @@
|
||||
#include <linux/regulator/driver.h>
|
||||
#include "pmbus.h"
|
||||
|
||||
enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3882, ltc3883, ltm4676 };
|
||||
enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3882, ltc3883, ltc3887,
|
||||
ltm4676 };
|
||||
|
||||
/* Common for all chips */
|
||||
#define LTC2978_MFR_VOUT_PEAK 0xdd
|
||||
@ -42,7 +43,7 @@ enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3882, ltc3883, ltm4676 };
|
||||
#define LTC2974_MFR_IOUT_PEAK 0xd7
|
||||
#define LTC2974_MFR_IOUT_MIN 0xd8
|
||||
|
||||
/* LTC3880, LTC3882, LTC3883, and LTM4676 */
|
||||
/* LTC3880, LTC3882, LTC3883, LTC3887, and LTM4676 */
|
||||
#define LTC3880_MFR_IOUT_PEAK 0xd7
|
||||
#define LTC3880_MFR_CLEAR_PEAKS 0xe3
|
||||
#define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4
|
||||
@ -60,9 +61,11 @@ enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3882, ltc3883, ltm4676 };
|
||||
#define LTC3880_ID_MASK 0xff00
|
||||
#define LTC3883_ID 0x4300
|
||||
#define LTC3883_ID_MASK 0xff00
|
||||
#define LTC3887_ID 0x4700
|
||||
#define LTC3887_ID_MASK 0xff00
|
||||
#define LTM4676_ID 0x4400
|
||||
#define LTM4676_ID_2 0x4480
|
||||
#define LTM4676A_ID 0x47E0
|
||||
#define LTM4676A_ID 0x47e0
|
||||
#define LTM4676_ID_MASK 0xfff0
|
||||
|
||||
#define LTC2974_NUM_PAGES 4
|
||||
@ -315,7 +318,8 @@ static int ltc2978_clear_peaks(struct i2c_client *client, int page,
|
||||
{
|
||||
int ret;
|
||||
|
||||
if (id == ltc3880 || id == ltc3882 || id == ltc3883 || id == ltm4676)
|
||||
if (id == ltc3880 || id == ltc3882 || id == ltc3883 || id == ltc3887 ||
|
||||
id == ltm4676)
|
||||
ret = pmbus_write_byte(client, 0, LTC3880_MFR_CLEAR_PEAKS);
|
||||
else
|
||||
ret = pmbus_write_byte(client, page, PMBUS_CLEAR_FAULTS);
|
||||
@ -373,6 +377,7 @@ static const struct i2c_device_id ltc2978_id[] = {
|
||||
{"ltc3880", ltc3880},
|
||||
{"ltc3882", ltc3882},
|
||||
{"ltc3883", ltc3883},
|
||||
{"ltc3887", ltc3887},
|
||||
{"ltm4676", ltm4676},
|
||||
{}
|
||||
};
|
||||
@ -432,6 +437,8 @@ static int ltc2978_get_id(struct i2c_client *client)
|
||||
return ltc3880;
|
||||
else if ((chip_id & LTC3883_ID_MASK) == LTC3883_ID)
|
||||
return ltc3883;
|
||||
else if ((chip_id & LTC3887_ID_MASK) == LTC3887_ID)
|
||||
return ltc3887;
|
||||
else if ((chip_id & LTM4676_ID_MASK) == LTM4676_ID ||
|
||||
(chip_id & LTM4676_ID_MASK) == LTM4676_ID_2 ||
|
||||
(chip_id & LTM4676_ID_MASK) == LTM4676A_ID)
|
||||
@ -511,6 +518,7 @@ static int ltc2978_probe(struct i2c_client *client,
|
||||
}
|
||||
break;
|
||||
case ltc3880:
|
||||
case ltc3887:
|
||||
case ltm4676:
|
||||
info->read_word_data = ltc3880_read_word_data;
|
||||
info->pages = LTC3880_NUM_PAGES;
|
||||
@ -573,6 +581,7 @@ static const struct of_device_id ltc2978_of_match[] = {
|
||||
{ .compatible = "lltc,ltc3880" },
|
||||
{ .compatible = "lltc,ltc3882" },
|
||||
{ .compatible = "lltc,ltc3883" },
|
||||
{ .compatible = "lltc,ltc3887" },
|
||||
{ .compatible = "lltc,ltm4676" },
|
||||
{ }
|
||||
};
|
||||
|
||||
Loading…
Reference in New Issue
Block a user