ASoC: Updates for v4.10

There's been a few bits of framework work this time around and quite a lot of cleanups and improvements to existing code: - Support for stereo DAPM controls from Chen-yu Tsai. - Some initial work on the of-graph sound card from Morimoto-san, the main bulk of this is currently in binding review. - Lots of Renesas cleanups from Morimoto-san and sunxi work from Chen-yu Tsai. - regmap conversions of the remaining AC'97 drivers from Lars-Peter Clausen. - A new version of the topology ABI from Mengdong Lin. - New drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and Realtek RT5665. -----BEGIN PGP SIGNATURE----- iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlhO62YTHGJyb29uaWVA a2VybmVsLm9yZwAKCRAk1otyXVSH0H6eB/9yhC3kyWNissnPZ7S9iY8b5J8NGVpW y5RQz4/ngD/H949z6WXbYo8jPWH9cpkr64ED68TsJ8CPUdJXEZAgC91yjgrrq0W6 9es76Y8SCjwx7kuxs4Vzi7oJNY7Srca7NmUHfrFIAu8+vV88U731RKsF6TR1yT1I 6W4FZnetHNVcuFf4Di66cxntgJt/wD2s06TPpLLDjs1AqZSIhfFDIsCOSuvldcoX clr/zEHVzh4gJV36JGDPvxDjjK5dqL/j1X3VlLSKlZYmzW4WK44patXVVhmZkhns tfi1RaXAWE/LmiJJ6pmgrpdCIsQJqZp2nkdRZ+pF52b2QfXDv2gI1Bcy =Gsj0 -----END PGP SIGNATURE----- Merge tag 'asoc-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.10 There's been a few bits of framework work this time around and quite a lot of cleanups and improvements to existing code: - Support for stereo DAPM controls from Chen-yu Tsai. - Some initial work on the of-graph sound card from Morimoto-san, the main bulk of this is currently in binding review. - Lots of Renesas cleanups from Morimoto-san and sunxi work from Chen-yu Tsai. - regmap conversions of the remaining AC'97 drivers from Lars-Peter Clausen. - A new version of the topology ABI from Mengdong Lin. - New drivers for Cirrus Logic CS42L42, Qualcomm MSM8916-WCD, and Realtek RT5665.
2016-12-12 22:05:20 +01:00 · 2016-12-12 22:05:20 +01:00 · 152fce5a23
commit 152fce5a23
parent d71bb23a81 a5de5b74a5
1236 changed files with 32524 additions and 9496 deletions
--- a/8
+++ b/8
@ -9,7 +9,7 @@
 			Linus
 ----------

-M: Matt Mackal
+N: Matt Mackal
 E: mpm@selenic.com
 D: SLOB slab allocator

@ -1910,7 +1910,7 @@ S: Ra'annana, Israel

 N: Andi Kleen
 E: andi@firstfloor.org
-U: http://www.halobates.de
+W: http://www.halobates.de
 D: network, x86, NUMA, various hacks
 S: Schwalbenstr. 96
 S: 85551 Ottobrunn
@ -2089,8 +2089,8 @@ D: ST Microelectronics SPEAr13xx PCI host bridge driver
 D: Synopsys Designware PCI host bridge driver

 N: Gabor Kuti
-M: seasons@falcon.sch.bme.hu
-M: seasons@makosteszta.sote.hu
+E: seasons@falcon.sch.bme.hu
+E: seasons@makosteszta.sote.hu
 D: Original author of software suspend

 N: Jaroslav Kysela
--- a/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
+++ b/Documentation/ABI/testing/sysfs-devices-system-ibm-rtl
@ -1,4 +1,4 @@
-What:           state
+What:           /sys/devices/system/ibm_rtl/state
 Date:           Sep 2010
 KernelVersion:  2.6.37
 Contact:        Vernon Mauery <vernux@us.ibm.com>
@ -10,7 +10,7 @@ Description:    The state file allows a means by which to change in and
 Users:          The ibm-prtm userspace daemon uses this interface.


-What:           version
+What:           /sys/devices/system/ibm_rtl/version
 Date:           Sep 2010
 KernelVersion:  2.6.37
 Contact:        Vernon Mauery <vernux@us.ibm.com>
--- a/Documentation/ABI/testing/sysfs-platform-sst-atom
+++ b/Documentation/ABI/testing/sysfs-platform-sst-atom
@ -0,0 +1,17 @@
+What:		/sys/devices/platform/8086%x:00/firmware_version
+Date:		November 2016
+KernelVersion:	4.10
+Contact:	"Sebastien Guiriec" <sebastien.guiriec@intel.com>
+Description:
+		LPE Firmware version for SST driver on all atom
+		plaforms (BYT/CHT/Merrifield/BSW).
+		If the FW has never been loaded it will display:
+			"FW not yet loaded"
+		If FW has been loaded it will display:
+			"v01.aa.bb.cc"
+		aa: Major version is reflecting SoC version:
+			0d: BYT FW
+			0b: BSW FW
+			07: Merrifield FW
+		bb: Minor version
+		cc: Build version
--- a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
@ -6,7 +6,7 @@ perform in-band IPMI communication with their host.

 Required properties:

- compatible : should be "aspeed,ast2400-bt-bmc"
+- compatible : should be "aspeed,ast2400-ibt-bmc"
 - reg: physical address and size of the registers

 Optional properties:
@ -17,7 +17,7 @@ Optional properties:
 Example:

 	ibt@1e789140 {
-		compatible = "aspeed,ast2400-bt-bmc";
+		compatible = "aspeed,ast2400-ibt-bmc";
 		reg = <0x1e789140 0x18>;
 		interrupts = <8>;
 	};
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
@ -43,6 +43,9 @@ Optional properties:
  reset signal present internally in some host controller IC designs.
  See Documentation/devicetree/bindings/reset/reset.txt for details.

+* reset-names: request name for using "resets" property. Must be "reset".
+	(It will be used together with "resets" property.)
+
 * clocks: from common clock binding: handle to biu and ciu clocks for the
  bus interface unit clock and the card interface unit clock.

@ -103,6 +106,8 @@ board specific portions as listed below.
 		interrupts = <0 75 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		resets = <&rst 20>;
+		reset-names = "reset";
 	};

 [board specific internal DMA resources]
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@ -9,10 +9,26 @@ The following properties are common to the Ethernet controllers:
 - max-speed: number, specifies maximum speed in Mbit/s supported by the device;
 - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
  the maximum frame size (there's contradiction in ePAPR).
- phy-mode: string, operation mode of the PHY interface; supported values are
-  "mii", "gmii", "sgmii", "qsgmii", "tbi", "rev-mii", "rmii", "rgmii", "rgmii-id",
-  "rgmii-rxid", "rgmii-txid", "rtbi", "smii", "xgmii", "trgmii"; this is now a
-  de-facto standard property;
+- phy-mode: string, operation mode of the PHY interface. This is now a de-facto
+  standard property; supported values are:
+  * "mii"
+  * "gmii"
+  * "sgmii"
+  * "qsgmii"
+  * "tbi"
+  * "rev-mii"
+  * "rmii"
+  * "rgmii" (RX and TX delays are added by the MAC when required)
+  * "rgmii-id" (RGMII with internal RX and TX delays provided by the PHY, the
+     MAC should not add the RX or TX delays in this case)
+  * "rgmii-rxid" (RGMII with internal RX delay provided by the PHY, the MAC
+     should not add an RX delay in this case)
+  * "rgmii-txid" (RGMII with internal TX delay provided by the PHY, the MAC
+     should not add an TX delay in this case)
+  * "rtbi"
+  * "smii"
+  * "xgmii"
+  * "trgmii"
 - phy-connection-type: the same as "phy-mode" property but described in ePAPR;
 - phy-handle: phandle, specifies a reference to a node representing a PHY
  device; this property is described in ePAPR and so preferred;
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
@ -26,13 +26,16 @@ Required properties:
 	- "sys"
 	- "legacy"
 	- "client"
- resets: Must contain five entries for each entry in reset-names.
+- resets: Must contain seven entries for each entry in reset-names.
 	   See ../reset/reset.txt for details.
 - reset-names: Must include the following names
 	- "core"
 	- "mgmt"
 	- "mgmt-sticky"
 	- "pipe"
+	- "pm"
+	- "aclk"
+	- "pclk"
 - pinctrl-names : The pin control state names
 - pinctrl-0: The "default" pinctrl state
 - #interrupt-cells: specifies the number of cells needed to encode an
@ -86,8 +89,10 @@ pcie0: pcie@f8000000 {
 	reg = <0x0 0xf8000000 0x0 0x2000000>, <0x0 0xfd000000 0x0 0x1000000>;
 	reg-names = "axi-base", "apb-base";
 	resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
-		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>;
-	reset-names = "core", "mgmt", "mgmt-sticky", "pipe";
+		 <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+		 <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+	reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+		      "pm", "pclk", "aclk";
 	phys = <&pcie_phy>;
 	phy-names = "pcie-phy";
 	pinctrl-names = "default";
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@ -14,11 +14,6 @@ Required properies:
 - #size-cells	: The value of this property must be 1
 - ranges	: defines mapping between pin controller node (parent) to
   gpio-bank node (children).
- - interrupt-parent: phandle of the interrupt parent to which the external
-   GPIO interrupts are forwarded to.
- - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
-   which includes IRQ mux selection register, and the offset of the IRQ mux
-   selection register.
 - pins-are-numbered: Specify the subnodes are using numbered pinmux to
   specify pins.

@ -37,6 +32,11 @@ Required properties:

 Optional properties:
 - reset:	  : Reference to the reset controller
+ - interrupt-parent: phandle of the interrupt parent to which the external
+   GPIO interrupts are forwarded to.
+ - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
+   which includes IRQ mux selection register, and the offset of the IRQ mux
+   selection register.

 Example:
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>
--- a/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
+++ b/Documentation/devicetree/bindings/sound/axentia,tse850-pcm5142.txt
@ -0,0 +1,88 @@
+Devicetree bindings for the Axentia TSE-850 audio complex
+
+Required properties:
+  - compatible: "axentia,tse850-pcm5142"
+  - axentia,ssc-controller: The phandle of the atmel SSC controller used as
+    cpu dai.
+  - axentia,audio-codec: The phandle of the PCM5142 codec.
+  - axentia,add-gpios: gpio specifier that controls the mixer.
+  - axentia,loop1-gpios: gpio specifier that controls loop relays on channel 1.
+  - axentia,loop2-gpios: gpio specifier that controls loop relays on channel 2.
+  - axentia,ana-supply: Regulator that supplies the output amplifier. Must
+    support voltages in the 2V - 20V range, in 1V steps.
+
+The schematics explaining the gpios are as follows:
+
+               loop1 relays
+   IN1 +---o  +------------+  o---+ OUT1
+            \                /
+             +              +
+             |   /          |
+             +--o  +--.     |
+             |  add   |     |
+             |        V     |
+             |      .---.   |
+   DAC +----------->|Sum|---+
+             |      '---'   |
+             |              |
+             +              +
+
+   IN2 +---o--+------------+--o---+ OUT2
+               loop2 relays
+
+The 'loop1' gpio pin controlls two relays, which are either in loop position,
+meaning that input and output are directly connected, or they are in mixer
+position, meaning that the signal is passed through the 'Sum' mixer. Similarly
+for 'loop2'.
+
+In the above, the 'loop1' relays are inactive, thus feeding IN1 to the mixer
+(if 'add' is active) and feeding the mixer output to OUT1. The 'loop2' relays
+are active, short-cutting the TSE-850 from channel 2. IN1, IN2, OUT1 and OUT2
+are TSE-850 connectors and DAC is the PCB name of the (filtered) output from
+the PCM5142 codec.
+
+Example:
+
+	&i2c {
+		codec: pcm5142@4c {
+			compatible = "ti,pcm5142";
+
+			reg = <0x4c>;
+
+			AVDD-supply = <&reg_3v3>;
+			DVDD-supply = <&reg_3v3>;
+			CPVDD-supply = <&reg_3v3>;
+
+			clocks = <&sck>;
+
+			pll-in = <3>;
+			pll-out = <6>;
+		};
+	};
+
+	ana: ana-reg {
+		compatible = "pwm-regulator";
+
+		regulator-name = "ANA";
+
+		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
+		pwm-dutycycle-unit = <1000>;
+		pwm-dutycycle-range = <100 1000>;
+
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <20000000>;
+		regulator-ramp-delay = <1000>;
+	};
+
+	sound {
+		compatible = "axentia,tse850-pcm5142";
+
+		axentia,ssc-controller = <&ssc0>;
+		axentia,audio-codec = <&codec>;
+
+		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+
+		axentia,ana-supply = <&ana>;
+	};
--- a/Documentation/devicetree/bindings/sound/cs35l34.txt
+++ b/Documentation/devicetree/bindings/sound/cs35l34.txt
@ -0,0 +1,64 @@
+CS35L34 Speaker Amplifier
+
+Required properties:
+
+  - compatible : "cirrus,cs35l34"
+
+  - reg : the I2C address of the device for I2C.
+
+  - VA-supply, VP-supply : power supplies for the device,
+    as covered in
+    Documentation/devicetree/bindings/regulator/regulator.txt.
+
+  - cirrus,boost-vtge-millivolt : Boost Voltage Value.  Configures the boost
+    converter's output voltage in mV. The range is from VP to 8V with
+    increments of 100mV.
+
+  - cirrus,boost-nanohenry: Inductor value for boost converter. The value is
+    in nH and they can be values of 1000nH, 1100nH, 1200nH, 1500nH, and 2200nH.
+
+Optional properties:
+
+  - reset-gpios: GPIO used to reset the amplifier.
+
+  - interrupt-parent : Specifies the phandle of the interrupt controller to
+    which the IRQs from CS35L34 are delivered to.
+  - interrupts : IRQ line info CS35L34.
+    (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+    for further information relating to interrupt properties)
+
+  - cirrus,boost-peak-milliamp : Boost converter peak current limit in mA. The
+    range starts at 1200mA and goes to a maximum of 3840mA with increments of
+    80mA. The default value is 2480mA.
+
+  - cirrus,i2s-sdinloc : ADSP SDIN I2S channel location. Indicates whether the
+    received mono data is in the left or right portion of the I2S frame
+    according to the AD0 pin or directly via this configuration.
+    0x0 (Default) = Selected by AD0 input (if AD0 = LOW, use left channel),
+    0x2 = Left,
+    0x1 = Selected by the inversion of the AD0 input (if AD0 = LOW, use right
+    channel),
+    0x3 = Right.
+
+  - cirrus,gain-zc-disable: Boolean property. If set, the gain change will take
+    effect without waiting for a zero cross.
+
+  - cirrus,tdm-rising-edge: Boolean property. If set, data is on the rising edge of
+    SCLK. Otherwise, data is on the falling edge of SCLK.
+
+
+Example:
+
+cs35l34: cs35l34@40 {
+	compatible = "cirrus,cs35l34";
+	reg = <0x40>;
+
+	interrupt-parent = <&gpio8>;
+	interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+	reset-gpios = <&gpio 10 0>;
+
+	cirrus,boost-vtge-milltvolt = <8000>; /* 8V */
+	cirrus,boost-ind-nanohenry = <1000>; /* 1uH */
+	cirrus,boost-peak-milliamp = <3000>; /* 3A */
+};
--- a/Documentation/devicetree/bindings/sound/cs42l42.txt
+++ b/Documentation/devicetree/bindings/sound/cs42l42.txt
@ -0,0 +1,110 @@
+CS42L42 audio CODEC
+
+Required properties:
+
+  - compatible : "cirrus,cs42l42"
+
+  - reg : the I2C address of the device for I2C.
+
+  - VP-supply, VCP-supply, VD_FILT-supply, VL-supply, VA-supply :
+  power supplies for the device, as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Optional properties:
+
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+  deasserted before communication to the codec starts.
+
+  - interrupt-parent : Specifies the phandle of the interrupt controller to
+  which the IRQs from CS42L42 are delivered to.
+
+  - interrupts : IRQ line info CS42L42.
+  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+  for further information relating to interrupt properties)
+
+  - cirrus,ts-inv : Boolean property. For jacks that invert the tip sense
+  polarity. Normal jacks will short tip sense pin to HS1 when headphones are
+  plugged in and leave tip sense floating when not plugged in. Inverting jacks
+  short tip sense when unplugged and float when plugged in.
+
+  0 = (Default) Non-inverted
+  1 = Inverted
+
+  - cirrus,ts-dbnc-rise : Debounce the rising edge of TIP_SENSE_PLUG. With no
+  debounce, the tip sense pin might be noisy on a plug event.
+
+  0 - 0ms,
+  1 - 125ms,
+  2 - 250ms,
+  3 - 500ms,
+  4 - 750ms,
+  5 - (Default) 1s,
+  6 - 1.25s,
+  7 - 1.5s,
+
+  - cirrus,ts-dbnc-fall : Debounce the falling edge of TIP_SENSE_UNPLUG.
+  With no debounce, the tip sense pin might be noisy on an unplug event.
+
+  0 - 0ms,
+  1 - 125ms,
+  2 - 250ms,
+  3 - 500ms,
+  4 - 750ms,
+  5 - (Default) 1s,
+  6 - 1.25s,
+  7 - 1.5s,
+
+  - cirrus,btn-det-init-dbnce : This sets how long the driver sleeps after
+  enabling button detection interrupts. After auto-detection and before
+  servicing button interrupts, the HS bias needs time to settle. If you
+  don't wait, there is possibility for erroneous button interrupt.
+
+  0ms - 200ms,
+  Default = 100ms
+
+  - cirrus,btn-det-event-dbnce : This sets how long the driver delays after
+  receiving a button press interrupt. With level detect interrupts, you want
+  to wait a small amount of time to make sure the button press is making a
+  clean connection with the bias resistors.
+
+  0ms - 20ms,
+  Default = 10ms
+
+  - cirrus,bias-lvls : For a level-detect headset button scheme, each button
+  will bias the mic pin to a certain voltage. To determine which button was
+  pressed, the driver will compare this biased voltage to sequential,
+  decreasing voltages and will stop when a comparator is tripped,
+  indicating a comparator voltage < bias voltage. This value represents a
+  percentage of the internally generated HS bias voltage. For different
+  hardware setups, a designer might want to tweak this. This is an array of
+  descending values for the comparator voltage.
+
+  Array of 4 values
+  Each 0-63
+  < x1 x2 x3 x4 >
+  Default = < 15 8 4 1>
+
+
+Example:
+
+cs42l42: cs42l42@48 {
+	compatible = "cirrus,cs42l42";
+	reg = <0x48>;
+	VA-supply = <&dummy_vreg>;
+	VP-supply = <&dummy_vreg>;
+	VCP-supply = <&dummy_vreg>;
+	VD_FILT-supply = <&dummy_vreg>;
+	VL-supply = <&dummy_vreg>;
+
+	reset-gpios = <&axi_gpio_0 1 0>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <55 8>
+
+	cirrus,ts-inv = <0x00>;
+	cirrus,ts-dbnc-rise = <0x05>;
+	cirrus,ts-dbnc-fall = <0x00>;
+	cirrus,btn-det-init-dbnce = <100>;
+	cirrus,btn-det-event-dbnce = <10>;
+	cirrus,bias-lvls = <0x0F 0x08 0x04 0x01>;
+	cirrus,hs-bias-ramp-rate = <0x02>;
+};
--- a/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcbsp.txt
@ -43,7 +43,7 @@ mcbsp0: mcbsp@1d10000 {
 		<0x00310000 0x1000>;
 	reg-names = "mpu", "dat";
 	interrupts = <97 98>;
-	interrupts-names = "rx", "tx";
+	interrupt-names = "rx", "tx";
 	dmas = <&edma0 3 1
 		&edma0 2 1>;
 	dma-names = "tx", "rx";
--- a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
+++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
@ -12,7 +12,7 @@ Required properties:

 Optional properties:
 - ti,dmic: phandle for the OMAP dmic node if the machine have it connected
- ti,jack_detection: Need to be present if the board capable to detect jack
+- ti,jack-detection: Need to be present if the board capable to detect jack
  insertion, removal.

 Available audio endpoints for the audio-routing table:
--- a/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt
@ -44,8 +44,7 @@ Required dai-link subnodes:
 Required CPU/CODEC subnodes properties:

 -link-name		: Name of the dai link.
-sound-dai		: phandle and port of CPU/CODEC
-capture-dai		: phandle and port of CPU/CODEC
+-sound-dai		: phandle/s and port of CPU/CODEC

 Example:

@ -73,7 +72,7 @@ sound: sound {
 			sound-dai = <&lpass MI2S_PRIMARY>;
 		};
 		codec {
-			sound-dai = <&wcd_codec 0>;
+			sound-dai = <&lpass_codec 0>, <&wcd_codec 0>;
 		};
 	};

--- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-analog.txt
@ -0,0 +1,85 @@
+msm8916 analog audio CODEC
+
+Bindings for codec Analog IP which is integrated in pmic pm8916,
+
+## Bindings for codec core on pmic:
+
+Required properties
+ - compatible = "qcom,pm8916-wcd-analog-codec";
+ - reg: represents the slave base address provided to the peripheral.
+ - interrupt-parent : The parent interrupt controller.
+ - interrupts: List of interrupts in given SPMI peripheral.
+ - interrupt-names: Names specified to above list of interrupts in same
+		    order. List of supported interrupt names are:
+  "cdc_spk_cnp_int" - Speaker click and pop interrupt.
+  "cdc_spk_clip_int" - Speaker clip interrupt.
+  "cdc_spk_ocp_int" - Speaker over current protect interrupt.
+  "mbhc_ins_rem_det1" - jack insert removal detect interrupt 1.
+  "mbhc_but_rel_det" - button release interrupt.
+  "mbhc_but_press_det" - button press event
+  "mbhc_ins_rem_det" - jack insert removal detect interrupt.
+  "mbhc_switch_int"	- multi button headset interrupt.
+  "cdc_ear_ocp_int" - Earphone over current protect interrupt.
+  "cdc_hphr_ocp_int" - Headphone R over current protect interrupt.
+  "cdc_hphl_ocp_det" - Headphone L over current protect interrupt.
+  "cdc_ear_cnp_int" - earphone cnp interrupt.
+  "cdc_hphr_cnp_int" - hphr click and pop interrupt.
+  "cdc_hphl_cnp_int" - hphl click and pop interrupt.
+
+ - clocks: Handle to mclk.
+ - clock-names: should be "mclk"
+ - vdd-cdc-io-supply: phandle to VDD_CDC_IO regulator DT node.
+ - vdd-cdc-tx-rx-cx-supply: phandle to VDD_CDC_TX/RX/CX regulator DT node.
+ - vdd-micbias-supply: phandle of VDD_MICBIAS supply's regulator DT node.
+
+Optional Properties:
+- qcom,micbias1-ext-cap: boolean, present if micbias1 has external capacitor
+			 connected.
+- qcom,micbias2-ext-cap: boolean, present if micbias2 has external capacitor
+			 connected.
+
+Example:
+
+spmi_bus {
+	...
+	audio-codec@f000{
+		compatible = "qcom,pm8916-wcd-analog-codec";
+		reg = <0xf000 0x200>;
+		reg-names = "pmic-codec-core";
+		clocks = <&gcc GCC_CODEC_DIGCODEC_CLK>;
+		clock-names = "mclk";
+		interrupt-parent = <&spmi_bus>;
+		interrupts = <0x1 0xf0 0x0 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x1 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x2 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x3 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x4 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x5 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x6 IRQ_TYPE_NONE>,
+			     <0x1 0xf0 0x7 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x0 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x1 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x2 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x3 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x4 IRQ_TYPE_NONE>,
+			     <0x1 0xf1 0x5 IRQ_TYPE_NONE>;
+		interrupt-names = "cdc_spk_cnp_int",
+				  "cdc_spk_clip_int",
+				  "cdc_spk_ocp_int",
+				  "mbhc_ins_rem_det1",
+				  "mbhc_but_rel_det",
+				  "mbhc_but_press_det",
+				  "mbhc_ins_rem_det",
+				  "mbhc_switch_int",
+				  "cdc_ear_ocp_int",
+				  "cdc_hphr_ocp_int",
+				  "cdc_hphl_ocp_det",
+				  "cdc_ear_cnp_int",
+				  "cdc_hphr_cnp_int",
+				  "cdc_hphl_cnp_int";
+	               VDD-CDC-IO-supply = <&pm8916_l5>;
+	               VDD-CDC-TX-RX-CX-supply = <&pm8916_l5>;
+	               VDD-MICBIAS-supply = <&pm8916_l13>;
+	               #sound-dai-cells = <1>;
+	};
+};
--- a/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,msm8916-wcd-digital.txt
@ -0,0 +1,20 @@
+msm8916 digital audio CODEC
+
+## Bindings for codec core in lpass:
+
+Required properties
+ - compatible = "qcom,msm8916-wcd-digital-codec";
+ - reg: address space for lpass codec.
+ - clocks: Handle to mclk and ahbclk
+ - clock-names: should be "mclk", "ahbix-clk".
+
+Example:
+
+audio-codec@771c000{
+	compatible = "qcom,msm8916-wcd-digital-codec";
+	reg = <0x0771c000 0x400>;
+	clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>,
+		 <&gcc GCC_CODEC_DIGCODEC_CLK>;
+	clock-names = "ahbix-clk", "mclk";
+	#sound-dai-cells = <1>;
+};
--- a/Documentation/devicetree/bindings/sound/rt5514.txt
+++ b/Documentation/devicetree/bindings/sound/rt5514.txt
@ -13,6 +13,9 @@ Optional properties:
 - clocks: The phandle of the master clock to the CODEC
 - clock-names: Should be "mclk"

+- realtek,dmic-init-delay-ms
+  Set the DMIC initial delay (ms) to wait it ready.
+
 Pins on the device (for linking into audio routes) for RT5514:

  * DMIC1L
--- a/Documentation/devicetree/bindings/sound/rt5663.txt
+++ b/Documentation/devicetree/bindings/sound/rt5663.txt
@ -1,10 +1,10 @@
-RT5663/RT5668 audio CODEC
+RT5663 audio CODEC

 This device supports I2C only.

 Required properties:

- compatible : One of "realtek,rt5663" or "realtek,rt5668".
+- compatible : "realtek,rt5663".

 - reg : The I2C address of the device.

@ -12,7 +12,7 @@ Required properties:

 Optional properties:

-Pins on the device (for linking into audio routes) for RT5663/RT5668:
+Pins on the device (for linking into audio routes) for RT5663:

  * IN1P
  * IN1N
--- a/Documentation/devicetree/bindings/sound/rt5665.txt
+++ b/Documentation/devicetree/bindings/sound/rt5665.txt
@ -0,0 +1,68 @@
+RT5665/RT5666/RT5668 audio CODEC
+
+This device supports I2C only.
+
+Required properties:
+
+- compatible : One of "realtek,rt5665", "realtek,rt5666" or "realtek,rt5668".
+
+- reg : The I2C address of the device.
+
+- interrupts : The CODEC's interrupt output.
+
+Optional properties:
+
+- realtek,in1-differential
+- realtek,in2-differential
+- realtek,in3-differential
+- realtek,in4-differential
+  Boolean. Indicate MIC1/2/3/4 input are differential, rather than single-ended.
+
+- realtek,dmic1-data-pin
+  0: dmic1 is not used
+  1: using GPIO4 pin as dmic1 data pin
+  2: using IN2N pin as dmic2 data pin
+
+- realtek,dmic2-data-pin
+  0: dmic2 is not used
+  1: using GPIO5 pin as dmic2 data pin
+  2: using IN2P pin as dmic2 data pin
+
+- realtek,jd-src
+  0: No JD is used
+  1: using JD1 as JD source
+
+- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
+
+Pins on the device (for linking into audio routes) for RT5659/RT5658:
+
+  * DMIC L1
+  * DMIC R1
+  * DMIC L2
+  * DMIC R2
+  * IN1P
+  * IN1N
+  * IN2P
+  * IN2N
+  * IN3P
+  * IN3N
+  * IN4P
+  * IN4N
+  * HPOL
+  * HPOR
+  * LOUTL
+  * LOUTR
+  * MONOOUT
+  * PDML
+  * PDMR
+
+Example:
+
+rt5659 {
+	compatible = "realtek,rt5665";
+	reg = <0x1b>;
+	interrupt-parent = <&gpio>;
+	interrupts = <TEGRA_GPIO(W, 3) GPIO_ACTIVE_HIGH>;
+	realtek,ldo1-en-gpios =
+		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+};
--- a/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
+++ b/Documentation/devicetree/bindings/sound/samsung,tm2-audio.txt
@ -0,0 +1,38 @@
+Samsung Exynos5433 TM2(E) audio complex with WM5110 codec
+
+Required properties:
+
+ - compatible		 : "samsung,tm2-audio"
+ - model		 : the user-visible name of this sound complex
+ - audio-codec		 : the phandle of the wm5110 audio codec node,
+			   as described in ../mfd/arizona.txt
+ - i2s-controller	 : the phandle of the I2S controller
+ - audio-amplifier	 : the phandle of the MAX98504 amplifier
+ - samsung,audio-routing : a list of the connections between audio components;
+			   each entry is a pair of strings, the first being the
+			   connection's sink, the second being the connection's
+			   source; valid names for sources and sinks are the
+			   WM5110's and MAX98504's pins and the jacks on the
+			   board: HP, SPK, Main Mic, Sub Mic, Third Mic,
+			   Headset Mic
+ - mic-bias-gpios	 : GPIO pin that enables the Main Mic bias regulator
+
+
+Example:
+
+sound {
+	compatible = "samsung,tm2-audio";
+	audio-codec = <&wm5110>;
+	i2s-controller = <&i2s0>;
+	audio-amplifier = <&max98504>;
+	mic-bias-gpios = <&gpr3 2 0>;
+	model = "wm5110";
+	samsung,audio-routing =
+		"HP", "HPOUT1L",
+		"HP", "HPOUT1R",
+		"SPK", "SPKOUT",
+		"SPKOUT", "HPOUT2L",
+		"SPKOUT", "HPOUT2R",
+		"Main Mic", "MICBIAS2",
+		"IN1R", "Main Mic";
+};
--- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt
+++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt
@ -1,8 +1,12 @@
 * Allwinner A10 Codec

 Required properties:
- compatible: must be either "allwinner,sun4i-a10-codec" or
-  "allwinner,sun7i-a20-codec"
+- compatible: must be one of the following compatibles:
+		- "allwinner,sun4i-a10-codec"
+		- "allwinner,sun6i-a31-codec"
+		- "allwinner,sun7i-a20-codec"
+		- "allwinner,sun8i-a23-codec"
+		- "allwinner,sun8i-h3-codec"
 - reg: must contain the registers location and length
 - interrupts: must contain the codec interrupt
 - dmas: DMA channels for tx and rx dma. See the DMA client binding,
@ -17,6 +21,43 @@ Required properties:
 Optional properties:
 - allwinner,pa-gpios: gpio to enable external amplifier

+Required properties for the following compatibles:
+		- "allwinner,sun6i-a31-codec"
+		- "allwinner,sun8i-a23-codec"
+		- "allwinner,sun8i-h3-codec"
+- resets: phandle to the reset control for this device
+- allwinner,audio-routing: A list of the connections between audio components.
+			   Each entry is a pair of strings, the first being the
+			   connection's sink, the second being the connection's
+			   source. Valid names include:
+
+			   Audio pins on the SoC:
+			   "HP"
+			   "HPCOM"
+			   "LINEIN"
+			   "LINEOUT"	(not on sun8i-a23)
+			   "MIC1"
+			   "MIC2"
+			   "MIC3"	(sun6i-a31 only)
+
+			   Microphone biases from the SoC:
+			   "HBIAS"
+			   "MBIAS"
+
+			   Board connectors:
+			   "Headphone"
+			   "Headset Mic"
+			   "Line In"
+			   "Line Out"
+			   "Mic"
+			   "Speaker"
+
+Required properties for the following compatibles:
+		- "allwinner,sun8i-a23-codec"
+		- "allwinner,sun8i-h3-codec"
+- allwinner,codec-analog-controls: A phandle to the codec analog controls
+				   block in the PRCM.
+
 Example:
 codec: codec@01c22c00 {
 	#sound-dai-cells = <0>;
@ -28,3 +69,23 @@ codec: codec@01c22c00 {
 	dmas = <&dma 0 19>, <&dma 0 19>;
 	dma-names = "rx", "tx";
 };
+
+codec: codec@01c22c00 {
+	#sound-dai-cells = <0>;
+	compatible = "allwinner,sun6i-a31-codec";
+	reg = <0x01c22c00 0x98>;
+	interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&ccu CLK_APB1_CODEC>, <&ccu CLK_CODEC>;
+	clock-names = "apb", "codec";
+	resets = <&ccu RST_APB1_CODEC>;
+	dmas = <&dma 15>, <&dma 15>;
+	dma-names = "rx", "tx";
+	allwinner,audio-routing =
+		"Headphone", "HP",
+		"Speaker", "LINEOUT",
+		"LINEIN", "Line In",
+		"MIC1",	"MBIAS",
+		"MIC1", "Mic",
+		"MIC2", "HBIAS",
+		"MIC2", "Headset Mic";
+};
--- a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
+++ b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt
@ -0,0 +1,16 @@
+* Allwinner Codec Analog Controls
+
+Required properties:
+- compatible: must be one of the following compatibles:
+		- "allwinner,sun8i-a23-codec-analog"
+		- "allwinner,sun8i-h3-codec-analog"
+
+Required properties if not a sub-node of the PRCM node:
+- reg: must contain the registers location and length
+
+Example:
+prcm: prcm@01f01400 {
+	codec_analog: codec-analog {
+		compatible = "allwinner,sun8i-a23-codec-analog";
+	};
+};
--- a/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic31xx.txt
@ -12,6 +12,7 @@ Required properties:
    "ti,tlv320aic3120" - TLV320AIC3120 (mono speaker amp, MiniDSP)
    "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
    "ti,tlv320dac3100" - TLV320DAC3100 (no ADC, mono speaker amp, no MiniDSP)
+    "ti,tlv320dac3101" - TLV320DAC3101 (no ADC, stereo speaker amp, no MiniDSP)

 - reg - <int> -  I2C slave address
 - HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
--- a/Documentation/devicetree/bindings/sound/wm8580.txt
+++ b/Documentation/devicetree/bindings/sound/wm8580.txt
@ -1,10 +1,10 @@
-WM8580 audio CODEC
+WM8580 and WM8581 audio CODEC

 This device supports I2C only.

 Required properties:

-  - compatible : "wlf,wm8580"
+  - compatible : "wlf,wm8580", "wlf,wm8581"

  - reg : the I2C address of the device.

--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@ -447,7 +447,6 @@ prototypes:
 	int (*flush) (struct file *);
 	int (*release) (struct inode *, struct file *);
 	int (*fsync) (struct file *, loff_t start, loff_t end, int datasync);
-	int (*aio_fsync) (struct kiocb *, int datasync);
 	int (*fasync) (int, struct file *, int);
 	int (*lock) (struct file *, int, struct file_lock *);
 	ssize_t (*readv) (struct file *, const struct iovec *, unsigned long,
--- a/Documentation/filesystems/vfs.txt
+++ b/Documentation/filesystems/vfs.txt
@ -828,7 +828,6 @@ struct file_operations {
 	int (*flush) (struct file *, fl_owner_t id);
 	int (*release) (struct inode *, struct file *);
 	int (*fsync) (struct file *, loff_t, loff_t, int datasync);
-	int (*aio_fsync) (struct kiocb *, int datasync);
 	int (*fasync) (int, struct file *, int);
 	int (*lock) (struct file *, int, struct file_lock *);
 	ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
--- a/Documentation/networking/dsa/dsa.txt
+++ b/Documentation/networking/dsa/dsa.txt
@ -67,13 +67,14 @@ Note that DSA does not currently create network interfaces for the "cpu" and
 Switch tagging protocols
 ------------------------

-DSA currently supports 4 different tagging protocols, and a tag-less mode as
+DSA currently supports 5 different tagging protocols, and a tag-less mode as
 well. The different protocols are implemented in:

 net/dsa/tag_trailer.c: Marvell's 4 trailer tag mode (legacy)
 net/dsa/tag_dsa.c: Marvell's original DSA tag
 net/dsa/tag_edsa.c: Marvell's enhanced DSA tag
 net/dsa/tag_brcm.c: Broadcom's 4 bytes tag
+net/dsa/tag_qca.c: Qualcomm's 2 bytes tag

 The exact format of the tag protocol is vendor specific, but in general, they
 all contain something which:
--- a/Documentation/networking/nf_conntrack-sysctl.txt
+++ b/Documentation/networking/nf_conntrack-sysctl.txt
@ -62,10 +62,13 @@ nf_conntrack_generic_timeout - INTEGER (seconds)
 	protocols.

 nf_conntrack_helper - BOOLEAN
-	0 - disabled
-	not 0 - enabled (default)
+	0 - disabled (default)
+	not 0 - enabled

 	Enable automatic conntrack helper assignment.
+	If disabled it is required to set up iptables rules to assign
+	helpers to connections.  See the CT target description in the
+	iptables-extensions(8) man page for further information.

 nf_conntrack_icmp_timeout - INTEGER (seconds)
 	default 30
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@ -777,6 +777,17 @@ Gets the current timestamp of kvmclock as seen by the current guest. In
 conjunction with KVM_SET_CLOCK, it is used to ensure monotonicity on scenarios
 such as migration.

+When KVM_CAP_ADJUST_CLOCK is passed to KVM_CHECK_EXTENSION, it returns the
+set of bits that KVM can return in struct kvm_clock_data's flag member.
+
+The only flag defined now is KVM_CLOCK_TSC_STABLE.  If set, the returned
+value is the exact kvmclock value seen by all VCPUs at the instant
+when KVM_GET_CLOCK was called.  If clear, the returned value is simply
+CLOCK_MONOTONIC plus a constant offset; the offset can be modified
+with KVM_SET_CLOCK.  KVM will try to make all VCPUs follow this clock,
+but the exact value read by each VCPU could differ, because the host
+TSC is not stable.
+
 struct kvm_clock_data {
 	__u64 clock;  /* kvmclock current value */
 	__u32 flags;
--- a/34
+++ b/34
@ -77,6 +77,7 @@ Descriptions of section entries:
 	Q: Patchwork web based patch tracking system site
 	T: SCM tree type and location.
 	   Type is one of: git, hg, quilt, stgit, topgit
+	B: Bug tracking system location.
 	S: Status, one of the following:
 	   Supported:	Someone is actually paid to look after this.
 	   Maintained:	Someone actually looks after it.
@ -281,6 +282,7 @@ L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
 Q:	https://patchwork.kernel.org/project/linux-acpi/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/
 F:	drivers/pnp/pnpacpi/
@ -304,6 +306,8 @@ W:	https://acpica.org/
 W:	https://github.com/acpica/acpica/
 Q:	https://patchwork.kernel.org/project/linux-acpi/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+B:	https://bugzilla.kernel.org
+B:	https://bugs.acpica.org
 S:	Supported
 F:	drivers/acpi/acpica/
 F:	include/acpi/
@ -313,6 +317,7 @@ ACPI FAN DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/fan.c

@ -328,6 +333,7 @@ ACPI THERMAL DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/*thermal*

@ -335,6 +341,7 @@ ACPI VIDEO DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	https://01.org/linux-acpi
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/acpi/acpi_video.c

@ -2318,6 +2325,13 @@ F:	include/uapi/linux/ax25.h
 F:	include/net/ax25.h
 F:	net/ax25/

+AXENTIA ASOC DRIVERS
+M:	Peter Rosin <peda@axentia.se>
+L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
+S:	Maintained
+F:	Documentation/devicetree/bindings/sound/axentia,*
+F:	sound/soc/atmel/tse850-pcm5142.c
+
 AZ6007 DVB DRIVER
 M:	Mauro Carvalho Chehab <mchehab@s-opensource.com>
 M:	Mauro Carvalho Chehab <mchehab@kernel.org>
@ -5663,6 +5677,7 @@ HIBERNATION (aka Software Suspend, aka swsusp)
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	arch/x86/power/
 F:	drivers/base/power/
@ -7084,6 +7099,7 @@ F:	drivers/scsi/53c700*
 LED SUBSYSTEM
 M:	Richard Purdie <rpurdie@rpsys.net>
 M:	Jacek Anaszewski <j.anaszewski@samsung.com>
+M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
 S:	Maintained
@ -8057,6 +8073,7 @@ F:	drivers/infiniband/hw/mlx4/
 F:	include/linux/mlx4/

 MELLANOX MLX5 core VPI driver
+M:	Saeed Mahameed <saeedm@mellanox.com>
 M:	Matan Barak <matanb@mellanox.com>
 M:	Leon Romanovsky <leonro@mellanox.com>
 L:	netdev@vger.kernel.org
@ -9247,11 +9264,12 @@ S:	Maintained
 F:	drivers/pci/host/*layerscape*

 PCI DRIVER FOR IMX6
-M:	Richard Zhu <Richard.Zhu@freescale.com>
+M:	Richard Zhu <hongxing.zhu@nxp.com>
 M:	Lucas Stach <l.stach@pengutronix.de>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.txt
 F:	drivers/pci/host/*imx6*

 PCI DRIVER FOR TI KEYSTONE
@ -9310,17 +9328,11 @@ F:	drivers/pci/host/pci-exynos.c

 PCI DRIVER FOR SYNOPSIS DESIGNWARE
 M:	Jingoo Han <jingoohan1@gmail.com>
-M:	Pratyush Anand <pratyush.anand@gmail.com>
-L:	linux-pci@vger.kernel.org
-S:	Maintained
-F:	drivers/pci/host/*designware*
-
-PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE
-M:	Jose Abreu <Jose.Abreu@synopsys.com>
+M:	Joao Pinto <Joao.Pinto@synopsys.com>
 L:	linux-pci@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/designware-pcie.txt
-F:	drivers/pci/host/pcie-designware-plat.c
+F:	drivers/pci/host/*designware*

 PCI DRIVER FOR GENERIC OF HOSTS
 M:	Will Deacon <will.deacon@arm.com>
@ -9335,7 +9347,7 @@ PCI DRIVER FOR INTEL VOLUME MANAGEMENT DEVICE (VMD)
 M:	Keith Busch <keith.busch@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
-F:	arch/x86/pci/vmd.c
+F:	drivers/pci/host/vmd.c

 PCIE DRIVER FOR ST SPEAR13XX
 M:	Pratyush Anand <pratyush.anand@gmail.com>
@ -9622,6 +9634,7 @@ POWER MANAGEMENT CORE
 M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 L:	linux-pm@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	drivers/base/power/
 F:	include/linux/pm.h
@ -11611,6 +11624,7 @@ M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
 M:	Len Brown <len.brown@intel.com>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
+B:	https://bugzilla.kernel.org
 S:	Supported
 F:	Documentation/power/
 F:	arch/x86/kernel/acpi/
--- a/30
+++ b/30
@ -1,8 +1,8 @@
 VERSION = 4
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
-NAME = Psychotic Stoned Sheep
+EXTRAVERSION =
+NAME = Roaring Lionus

 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@ -370,7 +370,7 @@ LDFLAGS_MODULE  =
 CFLAGS_KERNEL	=
 AFLAGS_KERNEL	=
 LDFLAGS_vmlinux =
-CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage -fno-tree-loop-im
+CFLAGS_GCOV	= -fprofile-arcs -ftest-coverage -fno-tree-loop-im -Wno-maybe-uninitialized
 CFLAGS_KCOV	:= $(call cc-option,-fsanitize-coverage=trace-pc,)


@ -399,11 +399,12 @@ KBUILD_CFLAGS   := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
 		   -fno-strict-aliasing -fno-common \
 		   -Werror-implicit-function-declaration \
 		   -Wno-format-security \
-		   -std=gnu89
+		   -std=gnu89 $(call cc-option,-fno-PIE)
+

 KBUILD_AFLAGS_KERNEL :=
 KBUILD_CFLAGS_KERNEL :=
-KBUILD_AFLAGS   := -D__ASSEMBLY__
+KBUILD_AFLAGS   := -D__ASSEMBLY__ $(call cc-option,-fno-PIE)
 KBUILD_AFLAGS_MODULE  := -DMODULE
 KBUILD_CFLAGS_MODULE  := -DMODULE
 KBUILD_LDFLAGS_MODULE := -T $(srctree)/scripts/module-common.lds
@ -606,6 +607,13 @@ else
 include/config/auto.conf: ;
 endif # $(dot-config)

+# For the kernel to actually contain only the needed exported symbols,
+# we have to build modules as well to determine what those symbols are.
+# (this can be evaluated only once include/config/auto.conf has been included)
+ifdef CONFIG_TRIM_UNUSED_KSYMS
+  KBUILD_MODULES := 1
+endif
+
 # The all: target is the default when no target is given on the
 # command line.
 # This allow a user to issue only 'make' to build a kernel including modules
@ -620,7 +628,6 @@ ARCH_CFLAGS :=
 include arch/$(SRCARCH)/Makefile

 KBUILD_CFLAGS	+= $(call cc-option,-fno-delete-null-pointer-checks,)
-KBUILD_CFLAGS	+= $(call cc-disable-warning,maybe-uninitialized,)
 KBUILD_CFLAGS	+= $(call cc-disable-warning,frame-address,)

 ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
@ -629,15 +636,18 @@ KBUILD_CFLAGS	+= $(call cc-option,-fdata-sections,)
 endif

 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS	+= -Os
+KBUILD_CFLAGS	+= -Os $(call cc-disable-warning,maybe-uninitialized,)
 else
 ifdef CONFIG_PROFILE_ALL_BRANCHES
-KBUILD_CFLAGS	+= -O2
+KBUILD_CFLAGS	+= -O2 $(call cc-disable-warning,maybe-uninitialized,)
 else
 KBUILD_CFLAGS   += -O2
 endif
 endif

+KBUILD_CFLAGS += $(call cc-ifversion, -lt, 0409, \
+			$(call cc-disable-warning,maybe-uninitialized,))
+
 # Tell gcc to never replace conditional load with a non-conditional one
 KBUILD_CFLAGS	+= $(call cc-option,--param=allow-store-data-races=0)

@ -941,7 +951,7 @@ ifdef CONFIG_GDB_SCRIPTS
 endif
 ifdef CONFIG_TRIM_UNUSED_KSYMS
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
-	  "$(MAKE) KBUILD_MODULES=1 -f $(srctree)/Makefile vmlinux_prereq"
+	  "$(MAKE) -f $(srctree)/Makefile vmlinux"
 endif

 # standalone target for easier testing
@ -1016,8 +1026,6 @@ prepare2: prepare3 prepare-compiler-check outputmakefile asm-generic
 prepare1: prepare2 $(version_h) include/generated/utsrelease.h \
                   include/config/auto.conf
 	$(cmd_crmodverdir)
-	$(Q)test -e include/generated/autoksyms.h || \
-	    touch   include/generated/autoksyms.h

 archprepare: archheaders archscripts prepare1 scripts_basic

--- a/arch/arc/Makefile
+++ b/arch/arc/Makefile
@ -50,6 +50,9 @@ atleast_gcc44 :=  $(call cc-ifversion, -ge, 0404, y)

 cflags-$(atleast_gcc44)			+= -fsection-anchors

+cflags-$(CONFIG_ARC_HAS_LLSC)		+= -mlock
+cflags-$(CONFIG_ARC_HAS_SWAPE)		+= -mswape
+
 ifdef CONFIG_ISA_ARCV2

 ifndef CONFIG_ARC_HAS_LL64
@ -68,7 +71,9 @@ cflags-$(CONFIG_ARC_DW2_UNWIND)		+= -fasynchronous-unwind-tables $(cfi)
 ifndef CONFIG_CC_OPTIMIZE_FOR_SIZE
 # Generic build system uses -O2, we want -O3
 # Note: No need to add to cflags-y as that happens anyways
-ARCH_CFLAGS += -O3
+#
+# Disable the false maybe-uninitialized warings gcc spits out at -O3
+ARCH_CFLAGS += -O3 $(call cc-disable-warning,maybe-uninitialized,)
 endif

 # small data is default for elf32 tool-chain. If not usable, disable it
--- a/arch/arc/boot/dts/axc001.dtsi
+++ b/arch/arc/boot/dts/axc001.dtsi
@ -71,7 +71,7 @@
 			reg-io-width = <4>;
 		};

-		arcpmu0: pmu {
+		arcpct0: pct {
 			compatible = "snps,arc700-pct";
 		};
 	};
--- a/arch/arc/boot/dts/nsim_700.dts
+++ b/arch/arc/boot/dts/nsim_700.dts
@ -69,7 +69,7 @@
 			};
 		};

-		arcpmu0: pmu {
+		arcpct0: pct {
 			compatible = "snps,arc700-pct";
 		};
 	};
--- a/arch/arc/boot/dts/nsimosci.dts
+++ b/arch/arc/boot/dts/nsimosci.dts
@ -83,5 +83,9 @@
 			reg = <0xf0003000 0x44>;
 			interrupts = <7>;
 		};
+
+		arcpct0: pct {
+			compatible = "snps,arc700-pct";
+		};
 	};
 };
--- a/arch/arc/configs/nsim_700_defconfig
+++ b/arch/arc/configs/nsim_700_defconfig
@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
--- a/arch/arc/configs/nsim_hs_defconfig
+++ b/arch/arc/configs/nsim_hs_defconfig
@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
--- a/arch/arc/configs/nsim_hs_smp_defconfig
+++ b/arch/arc/configs/nsim_hs_smp_defconfig
@ -12,6 +12,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
--- a/arch/arc/configs/nsimosci_defconfig
+++ b/arch/arc/configs/nsimosci_defconfig
@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
--- a/arch/arc/configs/nsimosci_hs_defconfig
+++ b/arch/arc/configs/nsimosci_hs_defconfig
@ -14,6 +14,7 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
 CONFIG_KALLSYMS_ALL=y
 CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
 # CONFIG_SLUB_DEBUG is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
--- a/arch/arc/configs/nsimosci_hs_smp_defconfig
+++ b/arch/arc/configs/nsimosci_hs_smp_defconfig
@ -10,6 +10,7 @@ CONFIG_IKCONFIG_PROC=y
 # CONFIG_PID_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="../arc_initramfs_hs/"
+CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_KPROBES=y
 CONFIG_MODULES=y
@ -34,7 +35,6 @@ CONFIG_INET=y
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
@ -72,7 +72,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=y
 CONFIG_DRM_ARCPGU=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 # CONFIG_HID is not set
 # CONFIG_USB_SUPPORT is not set
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@ -43,12 +43,14 @@
 #define STATUS_AE_BIT		5	/* Exception active */
 #define STATUS_DE_BIT		6	/* PC is in delay slot */
 #define STATUS_U_BIT		7	/* User/Kernel mode */
+#define STATUS_Z_BIT            11
 #define STATUS_L_BIT		12	/* Loop inhibit */

 /* These masks correspond to the status word(STATUS_32) bits */
 #define STATUS_AE_MASK		(1<<STATUS_AE_BIT)
 #define STATUS_DE_MASK		(1<<STATUS_DE_BIT)
 #define STATUS_U_MASK		(1<<STATUS_U_BIT)
+#define STATUS_Z_MASK		(1<<STATUS_Z_BIT)
 #define STATUS_L_MASK		(1<<STATUS_L_BIT)

 /*
--- a/arch/arc/include/asm/delay.h
+++ b/arch/arc/include/asm/delay.h
@ -22,10 +22,11 @@
 static inline void __delay(unsigned long loops)
 {
 	__asm__ __volatile__(
+	"	mov lp_count, %0	\n"
 	"	lp  1f			\n"
 	"	nop			\n"
 	"1:				\n"
-	: "+l"(loops));
+	: : "r"(loops));
 }

 extern void __bad_udelay(void);
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@ -280,7 +280,7 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)

 #define pte_page(pte)		pfn_to_page(pte_pfn(pte))
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#define pfn_pte(pfn, prot)	__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))

 /* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
 #define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@ -37,9 +37,9 @@ extern const char *arc_platform_smp_cpuinfo(void);
 * API expected BY platform smp code (FROM arch smp code)
 *
 * smp_ipi_irq_setup:
- *	Takes @cpu and @irq to which the arch-common ISR is hooked up
+ *	Takes @cpu and @hwirq to which the arch-common ISR is hooked up
 */
-extern int smp_ipi_irq_setup(int cpu, int irq);
+extern int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq);

 /*
 * struct plat_smp_ops	- SMP callbacks provided by platform to ARC SMP
--- a/arch/arc/kernel/devtree.c
+++ b/arch/arc/kernel/devtree.c
@ -31,6 +31,8 @@ static void __init arc_set_early_base_baud(unsigned long dt_root)
 		arc_base_baud = 166666666;	/* Fixed 166.6MHz clk (TB10x) */
 	else if (of_flat_dt_is_compatible(dt_root, "snps,arc-sdp"))
 		arc_base_baud = 33333333;	/* Fixed 33MHz clk (AXS10x) */
+	else if (of_flat_dt_is_compatible(dt_root, "ezchip,arc-nps"))
+		arc_base_baud = 800000000;      /* Fixed 800MHz clk (NPS) */
 	else
 		arc_base_baud = 50000000;	/* Fixed default 50MHz */
 }
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@ -181,6 +181,8 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,
 {
 	unsigned long flags;
 	cpumask_t online;
+	unsigned int destination_bits;
+	unsigned int distribution_mode;

 	/* errout if no online cpu per @cpumask */
 	if (!cpumask_and(&online, cpumask, cpu_online_mask))
@ -188,8 +190,15 @@ idu_irq_set_affinity(struct irq_data *data, const struct cpumask *cpumask,

 	raw_spin_lock_irqsave(&mcip_lock, flags);

-	idu_set_dest(data->hwirq, cpumask_bits(&online)[0]);
-	idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, IDU_M_DISTRI_RR);
+	destination_bits = cpumask_bits(&online)[0];
+	idu_set_dest(data->hwirq, destination_bits);
+
+	if (ffs(destination_bits) == fls(destination_bits))
+		distribution_mode = IDU_M_DISTRI_DEST;
+	else
+		distribution_mode = IDU_M_DISTRI_RR;
+
+	idu_set_mode(data->hwirq, IDU_M_TRIG_LEVEL, distribution_mode);

 	raw_spin_unlock_irqrestore(&mcip_lock, flags);

@ -207,16 +216,15 @@ static struct irq_chip idu_irq_chip = {

 };

-static int idu_first_irq;
+static irq_hw_number_t idu_first_hwirq;

 static void idu_cascade_isr(struct irq_desc *desc)
 {
-	struct irq_domain *domain = irq_desc_get_handler_data(desc);
-	unsigned int core_irq = irq_desc_get_irq(desc);
-	unsigned int idu_irq;
+	struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
+	irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
+	irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;

-	idu_irq = core_irq - idu_first_irq;
-	generic_handle_irq(irq_find_mapping(domain, idu_irq));
+	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
 }

 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
@ -282,7 +290,7 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 	struct irq_domain *domain;
 	/* Read IDU BCR to confirm nr_irqs */
 	int nr_irqs = of_irq_count(intc);
-	int i, irq;
+	int i, virq;
 	struct mcip_bcr mp;

 	READ_BCR(ARC_REG_MCIP_BCR, mp);
@ -303,11 +311,11 @@ idu_of_init(struct device_node *intc, struct device_node *parent)
 		 * however we need it to get the parent virq and set IDU handler
 		 * as first level isr
 		 */
-		irq = irq_of_parse_and_map(intc, i);
+		virq = irq_of_parse_and_map(intc, i);
 		if (!i)
-			idu_first_irq = irq;
+			idu_first_hwirq = irqd_to_hwirq(irq_get_irq_data(virq));

-		irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain);
+		irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain);
 	}

 	__mcip_cmd(CMD_IDU_ENABLE, 0);
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@ -43,8 +43,8 @@ SYSCALL_DEFINE0(arc_gettls)

 SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
 {
-	int uval;
-	int ret;
+	struct pt_regs *regs = current_pt_regs();
+	int uval = -EFAULT;

 	/*
 	 * This is only for old cores lacking LLOCK/SCOND, which by defintion
@ -54,24 +54,26 @@ SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
 	 */
 	WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));

+	/* Z indicates to userspace if operation succeded */
+	regs->status32 &= ~STATUS_Z_MASK;
+
 	if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
 		return -EFAULT;

 	preempt_disable();

-	ret = __get_user(uval, uaddr);
-	if (ret)
+	if (__get_user(uval, uaddr))
 		goto done;

-	if (uval != expected)
-		ret = -EAGAIN;
-	else
-		ret = __put_user(new, uaddr);
+	if (uval == expected) {
+		if (!__put_user(new, uaddr))
+			regs->status32 |= STATUS_Z_MASK;
+	}

 done:
 	preempt_enable();

-	return ret;
+	return uval;
 }

 void arch_cpu_idle(void)
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@ -22,6 +22,7 @@
 #include <linux/atomic.h>
 #include <linux/cpumask.h>
 #include <linux/reboot.h>
+#include <linux/irqdomain.h>
 #include <asm/processor.h>
 #include <asm/setup.h>
 #include <asm/mach_desc.h>
@ -67,11 +68,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 	int i;

 	/*
-	 * Initialise the present map, which describes the set of CPUs
-	 * actually populated at the present time.
+	 * if platform didn't set the present map already, do it now
+	 * boot cpu is set to present already by init/main.c
 	 */
+	if (num_present_cpus() <= 1) {
 		for (i = 0; i < max_cpus; i++)
 			set_cpu_present(i, true);
+	}
 }

 void __init smp_cpus_done(unsigned int max_cpus)
@ -351,20 +354,24 @@ irqreturn_t do_IPI(int irq, void *dev_id)
 */
 static DEFINE_PER_CPU(int, ipi_dev);

-int smp_ipi_irq_setup(int cpu, int irq)
+int smp_ipi_irq_setup(int cpu, irq_hw_number_t hwirq)
 {
 	int *dev = per_cpu_ptr(&ipi_dev, cpu);
+	unsigned int virq = irq_find_mapping(NULL, hwirq);
+
+	if (!virq)
+		panic("Cannot find virq for root domain and hwirq=%lu", hwirq);

 	/* Boot cpu calls request, all call enable */
 	if (!cpu) {
 		int rc;

-		rc = request_percpu_irq(irq, do_IPI, "IPI Interrupt", dev);
+		rc = request_percpu_irq(virq, do_IPI, "IPI Interrupt", dev);
 		if (rc)
-			panic("Percpu IRQ request failed for %d\n", irq);
+			panic("Percpu IRQ request failed for %u\n", virq);
 	}

-	enable_percpu_irq(irq, 0);
+	enable_percpu_irq(virq, 0);

 	return 0;
 }
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@ -152,14 +152,17 @@ static cycle_t arc_read_rtc(struct clocksource *cs)
 		cycle_t  full;
 	} stamp;

-
-	__asm__ __volatile(
-	"1:						\n"
-	"	lr		%0, [AUX_RTC_LOW]	\n"
-	"	lr		%1, [AUX_RTC_HIGH]	\n"
-	"	lr		%2, [AUX_RTC_CTRL]	\n"
-	"	bbit0.nt	%2, 31, 1b		\n"
-	: "=r" (stamp.low), "=r" (stamp.high), "=r" (status));
+	/*
+	 * hardware has an internal state machine which tracks readout of
+	 * low/high and updates the CTRL.status if
+	 *  - interrupt/exception taken between the two reads
+	 *  - high increments after low has been read
+	 */
+	do {
+		stamp.low = read_aux_reg(AUX_RTC_LOW);
+		stamp.high = read_aux_reg(AUX_RTC_HIGH);
+		status = read_aux_reg(AUX_RTC_CTRL);
+	} while (!(status & _BITUL(31)));

 	return stamp.full;
 }
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@ -23,7 +23,7 @@

 static int l2_line_sz;
 static int ioc_exists;
-int slc_enable = 1, ioc_enable = 1;
+int slc_enable = 1, ioc_enable = 0;
 unsigned long perip_base = ARC_UNCACHED_ADDR_SPACE; /* legacy value for boot */
 unsigned long perip_end = 0xFFFFFFFF; /* legacy value */

--- a/arch/arc/mm/dma.c
+++ b/arch/arc/mm/dma.c
@ -105,6 +105,31 @@ static void arc_dma_free(struct device *dev, size_t size, void *vaddr,
 	__free_pages(page, get_order(size));
 }

+static int arc_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+			void *cpu_addr, dma_addr_t dma_addr, size_t size,
+			unsigned long attrs)
+{
+	unsigned long user_count = vma_pages(vma);
+	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	unsigned long pfn = __phys_to_pfn(plat_dma_to_phys(dev, dma_addr));
+	unsigned long off = vma->vm_pgoff;
+	int ret = -ENXIO;
+
+	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+		return ret;
+
+	if (off < count && user_count <= (count - off)) {
+		ret = remap_pfn_range(vma, vma->vm_start,
+				      pfn + off,
+				      user_count << PAGE_SHIFT,
+				      vma->vm_page_prot);
+	}
+
+	return ret;
+}
+
 /*
 * streaming DMA Mapping API...
 * CPU accesses page via normal paddr, thus needs to explicitly made
@ -193,6 +218,7 @@ static int arc_dma_supported(struct device *dev, u64 dma_mask)
 struct dma_map_ops arc_dma_ops = {
 	.alloc			= arc_dma_alloc,
 	.free			= arc_dma_free,
+	.mmap			= arc_dma_mmap,
 	.map_page		= arc_dma_map_page,
 	.map_sg			= arc_dma_map_sg,
 	.sync_single_for_device	= arc_dma_sync_single_for_device,
--- a/arch/arc/plat-eznps/smp.c
+++ b/arch/arc/plat-eznps/smp.c
@ -140,16 +140,10 @@ static void eznps_init_per_cpu(int cpu)
 	mtm_enable_core(cpu);
 }

-static void eznps_ipi_clear(int irq)
-{
-	write_aux_reg(CTOP_AUX_IACK, 1 << irq);
-}
-
 struct plat_smp_ops plat_smp_ops = {
 	.info		= smp_cpuinfo_buf,
 	.init_early_smp	= eznps_init_cpumasks,
 	.cpu_kick	= eznps_smp_wakeup_cpu,
 	.ipi_send	= eznps_ipi_send,
 	.init_per_cpu	= eznps_init_per_cpu,
-	.ipi_clear	= eznps_ipi_clear,
 };
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@ -745,7 +745,6 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-pcduino2.dtb \
 	sun4i-a10-pov-protab2-ips9.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
-	ntc-gr8-evb.dtb \
 	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
 	sun5i-a10s-mk802.dtb \
@ -761,6 +760,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a13-olinuxino-micro.dtb \
 	sun5i-a13-q8-tablet.dtb \
 	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-evb.dtb \
 	sun5i-r8-chip.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@ -64,8 +64,8 @@
 			};

 			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};

@ -76,8 +76,8 @@
 			};

 			ldo5_reg: ldo5 {
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};

@ -100,14 +100,14 @@
 			};

 			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1200000>;
+				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};

 			ldo10_reg: ldo10 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 		};
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@ -643,9 +643,8 @@
 				reg = <0x30730000 0x10000>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>;
-				clock-names = "pix", "axi", "disp_axi";
+					<&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>;
+				clock-names = "pix", "axi";
 				status = "disabled";
 			};
 		};
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@ -13,6 +13,11 @@
 		};
 	};

+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
 	wl12xx_vmmc: wl12xx_vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vwl1271";
--- a/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
+++ b/arch/arm/boot/dts/logicpd-torpedo-som.dtsi
@ -13,9 +13,9 @@
 		};
 	};

-	memory@0 {
+	memory@80000000 {
 		device_type = "memory";
-		reg = <0 0>;
+		reg = <0x80000000 0>;
 	};

 	leds {
--- a/arch/arm/boot/dts/omap5-board-common.dtsi
+++ b/arch/arm/boot/dts/omap5-board-common.dtsi
@ -124,6 +124,7 @@
 		compatible = "ti,abe-twl6040";
 		ti,model = "omap5-uevm";

+		ti,jack-detection;
 		ti,mclk-freq = <19200000>;

 		ti,mcpdm = <&mcpdm>;
@ -415,7 +416,7 @@
 			ti,backup-battery-charge-high-current;
 		};

-		gpadc {
+		gpadc: gpadc {
 			compatible = "ti,palmas-gpadc";
 			interrupts = <18 0
 				      16 0
@ -475,8 +476,8 @@
 				smps6_reg: smps6 {
 					/* VDD_DDR3 - over VDD_SMPS6 */
 					regulator-name = "smps6";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
--- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
+++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
@ -82,6 +82,10 @@
 	gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
 };

+&sata {
+	nr-ports = <2>;
+};
+
 &ehci1 {
 	status = "okay";
 };
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@ -283,6 +283,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c0_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;

 			status = "disabled";
 		};
@ -296,6 +298,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c1_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;

 			status = "disabled";
 		};
@ -309,6 +313,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c2_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;

 			status = "disabled";
 		};
@ -322,6 +328,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c3_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;

 			status = "disabled";
 		};
@ -335,6 +343,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c4_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;

 			status = "disabled";
 		};
@ -348,6 +358,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c5_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;

 			status = "disabled";
 		};
@ -363,6 +375,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c10_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;

 			status = "disabled";
 		};
@ -376,6 +390,8 @@
 			clock-frequency = <400000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_i2c11_default>;
+			#address-cells = <1>;
+			#size-cells = <0>;

 			status = "disabled";
 		};
--- a/arch/arm/boot/dts/stih410-b2260.dts
+++ b/arch/arm/boot/dts/stih410-b2260.dts
@ -74,7 +74,7 @@
 		/* Low speed expansion connector */
 		spi0: spi@9844000 {
 			label = "LS-SPI0";
-			cs-gpio = <&pio30 3 0>;
+			cs-gpios = <&pio30 3 0>;
 			status = "okay";
 		};

--- a/arch/arm/boot/dts/sun5i-gr8-evb.dts
+++ b/arch/arm/boot/dts/sun5i-gr8-evb.dts
@ -44,7 +44,7 @@
 */

 /dts-v1/;
-#include "ntc-gr8.dtsi"
+#include "sun5i-gr8.dtsi"
 #include "sunxi-common-regulators.dtsi"

 #include <dt-bindings/gpio/gpio.h>
--- a/arch/arm/boot/dts/sun5i-gr8.dtsi
+++ b/arch/arm/boot/dts/sun5i-gr8.dtsi
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@ -282,11 +282,15 @@
 			uart1_pins_a: uart1@0 {
 				allwinner,pins = "PG6", "PG7";
 				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};

 			uart1_pins_cts_rts_a: uart1-cts-rts@0 {
 				allwinner,pins = "PG8", "PG9";
 				allwinner,function = "uart1";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};

 			mmc0_pins_a: mmc0@0 {
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@ -410,7 +410,7 @@
 			};

 			uart3_pins: uart3 {
-				allwinner,pins = "PG13", "PG14";
+				allwinner,pins = "PA13", "PA14";
 				allwinner,function = "uart3";
 				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
--- a/arch/arm/include/asm/Kbuild
+++ b/arch/arm/include/asm/Kbuild
@ -8,7 +8,6 @@ generic-y += early_ioremap.h
 generic-y += emergency-restart.h
 generic-y += errno.h
 generic-y += exec.h
-generic-y += export.h
 generic-y += ioctl.h
 generic-y += ipcbuf.h
 generic-y += irq_regs.h
--- a/arch/arm/include/asm/kvm_asm.h
+++ b/arch/arm/include/asm/kvm_asm.h
@ -66,6 +66,7 @@ extern char __kvm_hyp_vector[];
 extern void __kvm_flush_vm_context(void);
 extern void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
 extern void __kvm_tlb_flush_vmid(struct kvm *kvm);
+extern void __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu);

 extern int __kvm_vcpu_run(struct kvm_vcpu *vcpu);

--- a/arch/arm/include/asm/kvm_host.h
+++ b/arch/arm/include/asm/kvm_host.h
@ -57,6 +57,9 @@ struct kvm_arch {
 	/* VTTBR value associated with below pgd and vmid */
 	u64    vttbr;

+	/* The last vcpu id that ran on each physical CPU */
+	int __percpu *last_vcpu_ran;
+
 	/* Timer */
 	struct arch_timer_kvm	timer;

--- a/arch/arm/include/asm/kvm_hyp.h
+++ b/arch/arm/include/asm/kvm_hyp.h
@ -71,6 +71,7 @@
 #define ICIALLUIS	__ACCESS_CP15(c7, 0, c1, 0)
 #define ATS1CPR		__ACCESS_CP15(c7, 0, c8, 0)
 #define TLBIALLIS	__ACCESS_CP15(c8, 0, c3, 0)
+#define TLBIALL		__ACCESS_CP15(c8, 0, c7, 0)
 #define TLBIALLNSNHIS	__ACCESS_CP15(c8, 4, c3, 4)
 #define PRRR		__ACCESS_CP15(c10, 0, c2, 0)
 #define NMRR		__ACCESS_CP15(c10, 0, c2, 1)
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@ -33,7 +33,7 @@ endif
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_FIQ)		+= fiq.o fiqasm.o
-obj-$(CONFIG_MODULES)		+= module.o
+obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARM_MODULE_PLTS)	+= module-plts.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@ -0,0 +1,183 @@
+/*
+ *  linux/arch/arm/kernel/armksyms.c
+ *
+ *  Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/cryptohash.h>
+#include <linux/delay.h>
+#include <linux/in6.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/arm-smccc.h>
+
+#include <asm/checksum.h>
+#include <asm/ftrace.h>
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler...  (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+extern void __ashldi3(void);
+extern void __ashrdi3(void);
+extern void __divsi3(void);
+extern void __lshrdi3(void);
+extern void __modsi3(void);
+extern void __muldi3(void);
+extern void __ucmpdi2(void);
+extern void __udivsi3(void);
+extern void __umodsi3(void);
+extern void __do_div64(void);
+extern void __bswapsi2(void);
+extern void __bswapdi2(void);
+
+extern void __aeabi_idiv(void);
+extern void __aeabi_idivmod(void);
+extern void __aeabi_lasr(void);
+extern void __aeabi_llsl(void);
+extern void __aeabi_llsr(void);
+extern void __aeabi_lmul(void);
+extern void __aeabi_uidiv(void);
+extern void __aeabi_uidivmod(void);
+extern void __aeabi_ulcmp(void);
+
+extern void fpundefinstr(void);
+
+void mmioset(void *, unsigned int, size_t);
+void mmiocpy(void *, const void *, size_t);
+
+	/* platform dependent support */
+EXPORT_SYMBOL(arm_delay_ops);
+
+	/* networking */
+EXPORT_SYMBOL(csum_partial);
+EXPORT_SYMBOL(csum_partial_copy_from_user);
+EXPORT_SYMBOL(csum_partial_copy_nocheck);
+EXPORT_SYMBOL(__csum_ipv6_magic);
+
+	/* io */
+#ifndef __raw_readsb
+EXPORT_SYMBOL(__raw_readsb);
+#endif
+#ifndef __raw_readsw
+EXPORT_SYMBOL(__raw_readsw);
+#endif
+#ifndef __raw_readsl
+EXPORT_SYMBOL(__raw_readsl);
+#endif
+#ifndef __raw_writesb
+EXPORT_SYMBOL(__raw_writesb);
+#endif
+#ifndef __raw_writesw
+EXPORT_SYMBOL(__raw_writesw);
+#endif
+#ifndef __raw_writesl
+EXPORT_SYMBOL(__raw_writesl);
+#endif
+
+	/* string / mem functions */
+EXPORT_SYMBOL(strchr);
+EXPORT_SYMBOL(strrchr);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memmove);
+EXPORT_SYMBOL(memchr);
+EXPORT_SYMBOL(__memzero);
+
+EXPORT_SYMBOL(mmioset);
+EXPORT_SYMBOL(mmiocpy);
+
+#ifdef CONFIG_MMU
+EXPORT_SYMBOL(copy_page);
+
+EXPORT_SYMBOL(arm_copy_from_user);
+EXPORT_SYMBOL(arm_copy_to_user);
+EXPORT_SYMBOL(arm_clear_user);
+
+EXPORT_SYMBOL(__get_user_1);
+EXPORT_SYMBOL(__get_user_2);
+EXPORT_SYMBOL(__get_user_4);
+EXPORT_SYMBOL(__get_user_8);
+
+#ifdef __ARMEB__
+EXPORT_SYMBOL(__get_user_64t_1);
+EXPORT_SYMBOL(__get_user_64t_2);
+EXPORT_SYMBOL(__get_user_64t_4);
+EXPORT_SYMBOL(__get_user_32t_8);
+#endif
+
+EXPORT_SYMBOL(__put_user_1);
+EXPORT_SYMBOL(__put_user_2);
+EXPORT_SYMBOL(__put_user_4);
+EXPORT_SYMBOL(__put_user_8);
+#endif
+
+	/* gcc lib functions */
+EXPORT_SYMBOL(__ashldi3);
+EXPORT_SYMBOL(__ashrdi3);
+EXPORT_SYMBOL(__divsi3);
+EXPORT_SYMBOL(__lshrdi3);
+EXPORT_SYMBOL(__modsi3);
+EXPORT_SYMBOL(__muldi3);
+EXPORT_SYMBOL(__ucmpdi2);
+EXPORT_SYMBOL(__udivsi3);
+EXPORT_SYMBOL(__umodsi3);
+EXPORT_SYMBOL(__do_div64);
+EXPORT_SYMBOL(__bswapsi2);
+EXPORT_SYMBOL(__bswapdi2);
+
+#ifdef CONFIG_AEABI
+EXPORT_SYMBOL(__aeabi_idiv);
+EXPORT_SYMBOL(__aeabi_idivmod);
+EXPORT_SYMBOL(__aeabi_lasr);
+EXPORT_SYMBOL(__aeabi_llsl);
+EXPORT_SYMBOL(__aeabi_llsr);
+EXPORT_SYMBOL(__aeabi_lmul);
+EXPORT_SYMBOL(__aeabi_uidiv);
+EXPORT_SYMBOL(__aeabi_uidivmod);
+EXPORT_SYMBOL(__aeabi_ulcmp);
+#endif
+
+	/* bitops */
+EXPORT_SYMBOL(_set_bit);
+EXPORT_SYMBOL(_test_and_set_bit);
+EXPORT_SYMBOL(_clear_bit);
+EXPORT_SYMBOL(_test_and_clear_bit);
+EXPORT_SYMBOL(_change_bit);
+EXPORT_SYMBOL(_test_and_change_bit);
+EXPORT_SYMBOL(_find_first_zero_bit_le);
+EXPORT_SYMBOL(_find_next_zero_bit_le);
+EXPORT_SYMBOL(_find_first_bit_le);
+EXPORT_SYMBOL(_find_next_bit_le);
+
+#ifdef __ARMEB__
+EXPORT_SYMBOL(_find_first_zero_bit_be);
+EXPORT_SYMBOL(_find_next_zero_bit_be);
+EXPORT_SYMBOL(_find_first_bit_be);
+EXPORT_SYMBOL(_find_next_bit_be);
+#endif
+
+#ifdef CONFIG_FUNCTION_TRACER
+#ifdef CONFIG_OLD_MCOUNT
+EXPORT_SYMBOL(mcount);
+#endif
+EXPORT_SYMBOL(__gnu_mcount_nc);
+#endif
+
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+EXPORT_SYMBOL(__pv_phys_pfn_offset);
+EXPORT_SYMBOL(__pv_offset);
+#endif
+
+#ifdef CONFIG_HAVE_ARM_SMCCC
+EXPORT_SYMBOL(arm_smccc_smc);
+EXPORT_SYMBOL(arm_smccc_hvc);
+#endif
--- a/arch/arm/kernel/entry-ftrace.S
+++ b/arch/arm/kernel/entry-ftrace.S
@ -7,7 +7,6 @@
 #include <asm/assembler.h>
 #include <asm/ftrace.h>
 #include <asm/unwind.h>
-#include <asm/export.h>

 #include "entry-header.S"

@ -154,7 +153,6 @@ ENTRY(mcount)
 	__mcount _old
 #endif
 ENDPROC(mcount)
-EXPORT_SYMBOL(mcount)

 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller_old)
@ -207,7 +205,6 @@ UNWIND(.fnstart)
 #endif
 UNWIND(.fnend)
 ENDPROC(__gnu_mcount_nc)
-EXPORT_SYMBOL(__gnu_mcount_nc)

 #ifdef CONFIG_DYNAMIC_FTRACE
 ENTRY(ftrace_caller)
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@ -22,7 +22,6 @@
 #include <asm/memory.h>
 #include <asm/thread_info.h>
 #include <asm/pgtable.h>
-#include <asm/export.h>

 #if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING)
 #include CONFIG_DEBUG_LL_INCLUDE
@ -728,8 +727,6 @@ __pv_phys_pfn_offset:
 __pv_offset:
 	.quad	0
 	.size	__pv_offset, . -__pv_offset
-EXPORT_SYMBOL(__pv_phys_pfn_offset)
-EXPORT_SYMBOL(__pv_offset)
 #endif

 #include "head-common.S"
--- a/arch/arm/kernel/smccc-call.S
+++ b/arch/arm/kernel/smccc-call.S
@ -16,7 +16,6 @@
 #include <asm/opcodes-sec.h>
 #include <asm/opcodes-virt.h>
 #include <asm/unwind.h>
-#include <asm/export.h>

 	/*
 	 * Wrap c macros in asm macros to delay expansion until after the
@ -52,7 +51,6 @@ UNWIND(	.fnend)
 ENTRY(arm_smccc_smc)
 	SMCCC SMCCC_SMC
 ENDPROC(arm_smccc_smc)
-EXPORT_SYMBOL(arm_smccc_smc)

 /*
 * void smccc_hvc(unsigned long a0, unsigned long a1, unsigned long a2,
@ -62,4 +60,3 @@ EXPORT_SYMBOL(arm_smccc_smc)
 ENTRY(arm_smccc_hvc)
 	SMCCC SMCCC_HVC
 ENDPROC(arm_smccc_hvc)
-EXPORT_SYMBOL(arm_smccc_hvc)
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@ -74,6 +74,26 @@ void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long
 		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }

+void dump_backtrace_stm(u32 *stack, u32 instruction)
+{
+	char str[80], *p;
+	unsigned int x;
+	int reg;
+
+	for (reg = 10, x = 0, p = str; reg >= 0; reg--) {
+		if (instruction & BIT(reg)) {
+			p += sprintf(p, " r%d:%08x", reg, *stack--);
+			if (++x == 6) {
+				x = 0;
+				p = str;
+				printk("%s\n", str);
+			}
+		}
+	}
+	if (p != str)
+		printk("%s\n", str);
+}
+
 #ifndef CONFIG_ARM_UNWIND
 /*
 * Stack pointers should always be within the kernels view of
--- a/arch/arm/kernel/vmlinux-xip.lds.S
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@ -3,6 +3,9 @@
 * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
 */

+/* No __ro_after_init data in the .rodata section - which will always be ro */
+#define RO_AFTER_INIT_DATA
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
@ -223,6 +226,8 @@ SECTIONS
 		. = ALIGN(PAGE_SIZE);
 		__init_end = .;

+		*(.data..ro_after_init)
+
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 		READ_MOSTLY_DATA(L1_CACHE_BYTES)
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@ -114,11 +114,18 @@ void kvm_arch_check_processor_compat(void *rtn)
 */
 int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 {
-	int ret = 0;
+	int ret, cpu;

 	if (type)
 		return -EINVAL;

+	kvm->arch.last_vcpu_ran = alloc_percpu(typeof(*kvm->arch.last_vcpu_ran));
+	if (!kvm->arch.last_vcpu_ran)
+		return -ENOMEM;
+
+	for_each_possible_cpu(cpu)
+		*per_cpu_ptr(kvm->arch.last_vcpu_ran, cpu) = -1;
+
 	ret = kvm_alloc_stage2_pgd(kvm);
 	if (ret)
 		goto out_fail_alloc;
@ -141,6 +148,8 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 out_free_stage2_pgd:
 	kvm_free_stage2_pgd(kvm);
 out_fail_alloc:
+	free_percpu(kvm->arch.last_vcpu_ran);
+	kvm->arch.last_vcpu_ran = NULL;
 	return ret;
 }

@ -168,6 +177,9 @@ void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	int i;

+	free_percpu(kvm->arch.last_vcpu_ran);
+	kvm->arch.last_vcpu_ran = NULL;
+
 	for (i = 0; i < KVM_MAX_VCPUS; ++i) {
 		if (kvm->vcpus[i]) {
 			kvm_arch_vcpu_free(kvm->vcpus[i]);
@ -312,6 +324,19 @@ int kvm_arch_vcpu_init(struct kvm_vcpu *vcpu)

 void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 {
+	int *last_ran;
+
+	last_ran = this_cpu_ptr(vcpu->kvm->arch.last_vcpu_ran);
+
+	/*
+	 * We might get preempted before the vCPU actually runs, but
+	 * over-invalidation doesn't affect correctness.
+	 */
+	if (*last_ran != vcpu->vcpu_id) {
+		kvm_call_hyp(__kvm_tlb_flush_local_vmid, vcpu);
+		*last_ran = vcpu->vcpu_id;
+	}
+
 	vcpu->cpu = cpu;
 	vcpu->arch.host_cpu_context = this_cpu_ptr(kvm_host_cpu_state);

--- a/arch/arm/kvm/hyp/tlb.c
+++ b/arch/arm/kvm/hyp/tlb.c
@ -55,6 +55,21 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa)
 	__kvm_tlb_flush_vmid(kvm);
 }

+void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu)
+{
+	struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm);
+
+	/* Switch to requested VMID */
+	write_sysreg(kvm->arch.vttbr, VTTBR);
+	isb();
+
+	write_sysreg(0, TLBIALL);
+	dsb(nsh);
+	isb();
+
+	write_sysreg(0, VTTBR);
+}
+
 void __hyp_text __kvm_flush_vm_context(void)
 {
 	write_sysreg(0, TLBIALLNSNHIS);
--- a/arch/arm/lib/ashldi3.S
+++ b/arch/arm/lib/ashldi3.S
@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA.  */

 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>

 #ifdef __ARMEB__
 #define al r1
@ -53,5 +52,3 @@ ENTRY(__aeabi_llsl)

 ENDPROC(__ashldi3)
 ENDPROC(__aeabi_llsl)
-EXPORT_SYMBOL(__ashldi3)
-EXPORT_SYMBOL(__aeabi_llsl)
--- a/arch/arm/lib/ashrdi3.S
+++ b/arch/arm/lib/ashrdi3.S
@ -28,7 +28,6 @@ Boston, MA 02110-1301, USA.  */

 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>

 #ifdef __ARMEB__
 #define al r1
@ -53,5 +52,3 @@ ENTRY(__aeabi_lasr)

 ENDPROC(__ashrdi3)
 ENDPROC(__aeabi_lasr)
-EXPORT_SYMBOL(__ashrdi3)
-EXPORT_SYMBOL(__aeabi_lasr)
--- a/arch/arm/lib/backtrace.S
+++ b/arch/arm/lib/backtrace.S
@ -10,6 +10,7 @@
 * 27/03/03 Ian Molton Clean up CONFIG_CPU
 *
 */
+#include <linux/kern_levels.h>
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 		.text
@ -83,13 +84,13 @@ for_each_frame:	tst	frame, mask		@ Check for address exceptions
 		teq	r3, r1, lsr #11
 		ldreq	r0, [frame, #-8]	@ get sp
 		subeq	r0, r0, #4		@ point at the last arg
-		bleq	.Ldumpstm		@ dump saved registers
+		bleq	dump_backtrace_stm	@ dump saved registers

 1004:		ldr	r1, [sv_pc, #0]		@ if stmfd sp!, {..., fp, ip, lr, pc}
 		ldr	r3, .Ldsi		@ instruction exists,
 		teq	r3, r1, lsr #11
 		subeq	r0, frame, #16
-		bleq	.Ldumpstm		@ dump saved registers
+		bleq	dump_backtrace_stm	@ dump saved registers

 		teq	sv_fp, #0		@ zero saved fp means
 		beq	no_frame		@ no further frames
@ -112,38 +113,6 @@ ENDPROC(c_backtrace)
 		.long	1004b, 1006b
 		.popsection

-#define instr r4
-#define reg   r5
-#define stack r6
-
-.Ldumpstm:	stmfd	sp!, {instr, reg, stack, r7, lr}
-		mov	stack, r0
-		mov	instr, r1
-		mov	reg, #10
-		mov	r7, #0
-1:		mov	r3, #1
- ARM(		tst	instr, r3, lsl reg	)
- THUMB(		lsl	r3, reg			)
- THUMB(		tst	instr, r3		)
-		beq	2f
-		add	r7, r7, #1
-		teq	r7, #6
-		moveq	r7, #0
-		adr	r3, .Lcr
-		addne	r3, r3, #1		@ skip newline
-		ldr	r2, [stack], #-4
-		mov	r1, reg
-		adr	r0, .Lfp
-		bl	printk
-2:		subs	reg, reg, #1
-		bpl	1b
-		teq	r7, #0
-		adrne	r0, .Lcr
-		blne	printk
-		ldmfd	sp!, {instr, reg, stack, r7, pc}
-
-.Lfp:		.asciz	" r%d:%08x%s"
-.Lcr:		.asciz	"\n"
 .Lbad:		.asciz	"Backtrace aborted due to bad frame pointer <%p>\n"
 		.align
 .Ldsi:		.word	0xe92dd800 >> 11	@ stmfd sp!, {... fp, ip, lr, pc}
--- a/arch/arm/lib/bitops.h
+++ b/arch/arm/lib/bitops.h
@ -1,6 +1,5 @@
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>

 #if __LINUX_ARM_ARCH__ >= 6
 	.macro	bitop, name, instr
@ -26,7 +25,6 @@ UNWIND(	.fnstart	)
 	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm

 	.macro	testop, name, instr, store
@ -57,7 +55,6 @@ UNWIND(	.fnstart	)
 2:	bx	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 #else
 	.macro	bitop, name, instr
@ -77,7 +74,6 @@ UNWIND(	.fnstart	)
 	ret	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm

 /**
@ -106,6 +102,5 @@ UNWIND(	.fnstart	)
 	ret	lr
 UNWIND(	.fnend		)
 ENDPROC(\name		)
-EXPORT_SYMBOL(\name	)
 	.endm
 #endif
--- a/arch/arm/lib/bswapsdi2.S
+++ b/arch/arm/lib/bswapsdi2.S
@ -1,6 +1,5 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>

 #if __LINUX_ARM_ARCH__ >= 6
 ENTRY(__bswapsi2)
@ -36,5 +35,3 @@ ENTRY(__bswapdi2)
 	ret lr
 ENDPROC(__bswapdi2)
 #endif
-EXPORT_SYMBOL(__bswapsi2)
-EXPORT_SYMBOL(__bswapdi2)
--- a/arch/arm/lib/clear_user.S
+++ b/arch/arm/lib/clear_user.S
@ -10,7 +10,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>

 		.text

@ -51,9 +50,6 @@ USER(		strnebt	r2, [r0])
 UNWIND(.fnend)
 ENDPROC(arm_clear_user)
 ENDPROC(__clear_user_std)
-#ifndef CONFIG_UACCESS_WITH_MEMCPY
-EXPORT_SYMBOL(arm_clear_user)
-#endif

 		.pushsection .text.fixup,"ax"
 		.align	0
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>

 /*
 * Prototype:
@ -95,7 +94,6 @@ ENTRY(arm_copy_from_user)
 #include "copy_template.S"

 ENDPROC(arm_copy_from_user)
-EXPORT_SYMBOL(arm_copy_from_user)

 	.pushsection .fixup,"ax"
 	.align 0
--- a/arch/arm/lib/copy_page.S
+++ b/arch/arm/lib/copy_page.S
@ -13,7 +13,6 @@
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
 #include <asm/cache.h>
-#include <asm/export.h>

 #define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))

@ -46,4 +45,3 @@ ENTRY(copy_page)
 	PLD(	beq	2b			)
 		ldmfd	sp!, {r4, pc}			@	3
 ENDPROC(copy_page)
-EXPORT_SYMBOL(copy_page)
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>

 /*
 * Prototype:
@ -100,9 +99,6 @@ WEAK(arm_copy_to_user)

 ENDPROC(arm_copy_to_user)
 ENDPROC(__copy_to_user_std)
-#ifndef CONFIG_UACCESS_WITH_MEMCPY
-EXPORT_SYMBOL(arm_copy_to_user)
-#endif

 	.pushsection .text.fixup,"ax"
 	.align 0
--- a/arch/arm/lib/csumipv6.S
+++ b/arch/arm/lib/csumipv6.S
@ -9,7 +9,6 @@
 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>

 		.text

@ -31,4 +30,4 @@ ENTRY(__csum_ipv6_magic)
 		adcs	r0, r0, #0
 		ldmfd	sp!, {pc}
 ENDPROC(__csum_ipv6_magic)
-EXPORT_SYMBOL(__csum_ipv6_magic)
+
--- a/arch/arm/lib/csumpartial.S
+++ b/arch/arm/lib/csumpartial.S
@ -9,7 +9,6 @@
 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>

 		.text

@ -141,4 +140,3 @@ ENTRY(csum_partial)
 		bne	4b
 		b	.Lless4
 ENDPROC(csum_partial)
-EXPORT_SYMBOL(csum_partial)
--- a/arch/arm/lib/csumpartialcopy.S
+++ b/arch/arm/lib/csumpartialcopy.S
@ -49,6 +49,5 @@

 #define FN_ENTRY	ENTRY(csum_partial_copy_nocheck)
 #define FN_EXIT		ENDPROC(csum_partial_copy_nocheck)
-#define FN_EXPORT	EXPORT_SYMBOL(csum_partial_copy_nocheck)

 #include "csumpartialcopygeneric.S"
--- a/arch/arm/lib/csumpartialcopygeneric.S
+++ b/arch/arm/lib/csumpartialcopygeneric.S
@ -8,7 +8,6 @@
 * published by the Free Software Foundation.
 */
 #include <asm/assembler.h>
-#include <asm/export.h>

 /*
 * unsigned int
@ -332,4 +331,3 @@ FN_ENTRY
 		mov	r5, r4, get_byte_1
 		b	.Lexit
 FN_EXIT
-FN_EXPORT
--- a/arch/arm/lib/csumpartialcopyuser.S
+++ b/arch/arm/lib/csumpartialcopyuser.S
@ -73,7 +73,6 @@

 #define FN_ENTRY	ENTRY(csum_partial_copy_from_user)
 #define FN_EXIT		ENDPROC(csum_partial_copy_from_user)
-#define FN_EXPORT	EXPORT_SYMBOL(csum_partial_copy_from_user)

 #include "csumpartialcopygeneric.S"

--- a/arch/arm/lib/delay.c
+++ b/arch/arm/lib/delay.c
@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/export.h>
 #include <linux/timex.h>

 /*
@ -35,7 +34,6 @@ struct arm_delay_ops arm_delay_ops __ro_after_init = {
 	.const_udelay	= __loop_const_udelay,
 	.udelay		= __loop_udelay,
 };
-EXPORT_SYMBOL(arm_delay_ops);

 static const struct delay_timer *delay_timer;
 static bool delay_calibrated;
--- a/arch/arm/lib/div64.S
+++ b/arch/arm/lib/div64.S
@ -15,7 +15,6 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/unwind.h>
-#include <asm/export.h>

 #ifdef __ARMEB__
 #define xh r0
@ -211,4 +210,3 @@ Ldiv0_64:

 UNWIND(.fnend)
 ENDPROC(__do_div64)
-EXPORT_SYMBOL(__do_div64)
--- a/arch/arm/lib/findbit.S
+++ b/arch/arm/lib/findbit.S
@ -15,7 +15,6 @@
 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>
                .text

 /*
@ -38,7 +37,6 @@ ENTRY(_find_first_zero_bit_le)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_zero_bit_le)
-EXPORT_SYMBOL(_find_first_zero_bit_le)

 /*
 * Purpose  : Find next 'zero' bit
@ -59,7 +57,6 @@ ENTRY(_find_next_zero_bit_le)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_zero_bit_le)
-EXPORT_SYMBOL(_find_next_zero_bit_le)

 /*
 * Purpose  : Find a 'one' bit
@ -81,7 +78,6 @@ ENTRY(_find_first_bit_le)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_bit_le)
-EXPORT_SYMBOL(_find_first_bit_le)

 /*
 * Purpose  : Find next 'one' bit
@ -101,7 +97,6 @@ ENTRY(_find_next_bit_le)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_bit_le)
-EXPORT_SYMBOL(_find_next_bit_le)

 #ifdef __ARMEB__

@ -121,7 +116,6 @@ ENTRY(_find_first_zero_bit_be)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_zero_bit_be)
-EXPORT_SYMBOL(_find_first_zero_bit_be)

 ENTRY(_find_next_zero_bit_be)
 		teq	r1, #0
@ -139,7 +133,6 @@ ENTRY(_find_next_zero_bit_be)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_zero_bit_be)
-EXPORT_SYMBOL(_find_next_zero_bit_be)

 ENTRY(_find_first_bit_be)
 		teq	r1, #0
@ -157,7 +150,6 @@ ENTRY(_find_first_bit_be)
 3:		mov	r0, r1			@ no free bits
 		ret	lr
 ENDPROC(_find_first_bit_be)
-EXPORT_SYMBOL(_find_first_bit_be)

 ENTRY(_find_next_bit_be)
 		teq	r1, #0
@ -174,7 +166,6 @@ ENTRY(_find_next_bit_be)
 		add	r2, r2, #1		@ align bit pointer
 		b	2b			@ loop for next bit
 ENDPROC(_find_next_bit_be)
-EXPORT_SYMBOL(_find_next_bit_be)

 #endif

--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@ -31,7 +31,6 @@
 #include <asm/assembler.h>
 #include <asm/errno.h>
 #include <asm/domain.h>
-#include <asm/export.h>

 ENTRY(__get_user_1)
 	check_uaccess r0, 1, r1, r2, __get_user_bad
@ -39,7 +38,6 @@ ENTRY(__get_user_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_1)
-EXPORT_SYMBOL(__get_user_1)

 ENTRY(__get_user_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad
@ -60,7 +58,6 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_2)
-EXPORT_SYMBOL(__get_user_2)

 ENTRY(__get_user_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad
@ -68,7 +65,6 @@ ENTRY(__get_user_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_4)
-EXPORT_SYMBOL(__get_user_4)

 ENTRY(__get_user_8)
 	check_uaccess r0, 8, r1, r2, __get_user_bad
@ -82,7 +78,6 @@ ENTRY(__get_user_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_8)
-EXPORT_SYMBOL(__get_user_8)

 #ifdef __ARMEB__
 ENTRY(__get_user_32t_8)
@ -96,7 +91,6 @@ ENTRY(__get_user_32t_8)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_32t_8)
-EXPORT_SYMBOL(__get_user_32t_8)

 ENTRY(__get_user_64t_1)
 	check_uaccess r0, 1, r1, r2, __get_user_bad8
@ -104,7 +98,6 @@ ENTRY(__get_user_64t_1)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_1)
-EXPORT_SYMBOL(__get_user_64t_1)

 ENTRY(__get_user_64t_2)
 	check_uaccess r0, 2, r1, r2, __get_user_bad8
@ -121,7 +114,6 @@ rb	.req	r0
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_2)
-EXPORT_SYMBOL(__get_user_64t_2)

 ENTRY(__get_user_64t_4)
 	check_uaccess r0, 4, r1, r2, __get_user_bad8
@ -129,7 +121,6 @@ ENTRY(__get_user_64t_4)
 	mov	r0, #0
 	ret	lr
 ENDPROC(__get_user_64t_4)
-EXPORT_SYMBOL(__get_user_64t_4)
 #endif

 __get_user_bad8:
--- a/arch/arm/lib/io-readsb.S
+++ b/arch/arm/lib/io-readsb.S
@ -9,7 +9,6 @@
 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>

 .Linsb_align:	rsb	ip, ip, #4
 		cmp	ip, r2
@ -122,4 +121,3 @@ ENTRY(__raw_readsb)

 		ldmfd	sp!, {r4 - r6, pc}
 ENDPROC(__raw_readsb)
-EXPORT_SYMBOL(__raw_readsb)
--- a/arch/arm/lib/io-readsl.S
+++ b/arch/arm/lib/io-readsl.S
@ -9,7 +9,6 @@
 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>

 ENTRY(__raw_readsl)
 		teq	r2, #0		@ do we have to check for the zero len?
@ -78,4 +77,3 @@ ENTRY(__raw_readsl)
 		strb	r3, [r1, #0]
 		ret	lr
 ENDPROC(__raw_readsl)
-EXPORT_SYMBOL(__raw_readsl)
--- a/arch/arm/lib/io-readsw-armv3.S
+++ b/arch/arm/lib/io-readsw-armv3.S
@ -9,7 +9,6 @@
 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/export.h>

 .Linsw_bad_alignment:
 		adr	r0, .Linsw_bad_align_msg
@ -104,4 +103,4 @@ ENTRY(__raw_readsw)

 		ldmfd	sp!, {r4, r5, r6, pc}

-EXPORT_SYMBOL(__raw_readsw)
+
--- a/Show More
+++ b/Show More