Merge branches 'bugzilla-14337', 'bugzilla-14998', 'bugzilla-15407', 'bugzilla-15903' and 'misc-2.6.34' into release

This commit is contained in:
Len Brown 2010-05-06 22:04:31 -04:00
596 changed files with 8690 additions and 3103 deletions

View File

@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
issue of SET FEATURES - XFER MODE, and prior to operation.
</para>
<para>
Called by ata_device_add() after ata_dev_identify() determines
a device is present.
</para>
<para>
This entry may be specified as NULL in ata_port_operations.
</para>
@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in
<sect2><title>Taskfile read/write</title>
<programlisting>
void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
<para>
@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
hardware registers / DMA buffers, to obtain the current set of
taskfile register values.
Most drivers for taskfile-based hardware (PIO or MMIO) use
ata_tf_load() and ata_tf_read() for these hooks.
ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
</para>
</sect2>
<sect2><title>PIO data read/write</title>
<programlisting>
void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
</programlisting>
<para>
All bmdma-style drivers must implement this hook. This is the low-level
operation that actually copies the data bytes during a PIO data
transfer.
Typically the driver
will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
ata_mmio_data_xfer().
Typically the driver will choose one of ata_sff_data_xfer_noirq(),
ata_sff_data_xfer(), or ata_sff_data_xfer32().
</para>
</sect2>
<sect2><title>ATA command execute</title>
<programlisting>
void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
</programlisting>
<para>
causes an ATA command, previously loaded with
->tf_load(), to be initiated in hardware.
Most drivers for taskfile-based hardware use ata_exec_command()
Most drivers for taskfile-based hardware use ata_sff_exec_command()
for this hook.
</para>
@ -218,8 +213,8 @@ command.
<sect2><title>Read specific ATA shadow registers</title>
<programlisting>
u8 (*check_status)(struct ata_port *ap);
u8 (*check_altstatus)(struct ata_port *ap);
u8 (*sff_check_status)(struct ata_port *ap);
u8 (*sff_check_altstatus)(struct ata_port *ap);
</programlisting>
<para>
@ -227,20 +222,14 @@ u8 (*check_altstatus)(struct ata_port *ap);
hardware. On some hardware, reading the Status register has
the side effect of clearing the interrupt condition.
Most drivers for taskfile-based hardware use
ata_check_status() for this hook.
</para>
<para>
Note that because this is called from ata_device_add(), at
least a dummy function that clears device interrupts must be
provided for all drivers, even if the controller doesn't
actually have a taskfile status register.
ata_sff_check_status() for this hook.
</para>
</sect2>
<sect2><title>Select ATA device on bus</title>
<programlisting>
void (*dev_select)(struct ata_port *ap, unsigned int device);
void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
</programlisting>
<para>
@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
</para>
<para>
Most drivers for taskfile-based hardware use
ata_std_dev_select() for this hook. Controllers which do not
support second drives on a port (such as SATA contollers) will
use ata_noop_dev_select().
ata_sff_dev_select() for this hook.
</para>
</sect2>
@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *);
to struct ata_host_set.
</para>
<para>
Most legacy IDE drivers use ata_interrupt() for the
Most legacy IDE drivers use ata_sff_interrupt() for the
irq_handler hook, which scans all ports in the host_set,
determines which queued command was active (if any), and calls
ata_host_intr(ap,qc).
ata_sff_host_intr(ap,qc).
</para>
<para>
Most legacy IDE drivers use ata_bmdma_irq_clear() for the
Most legacy IDE drivers use ata_sff_irq_clear() for the
irq_clear() hook, which simply clears the interrupt and error
flags in the DMA status register.
</para>
@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set);
data from port at this time.
</para>
<para>
Many drivers use ata_port_stop() as this hook, which frees the
PRD table.
</para>
<para>
->host_stop() is called after all ->port_stop() calls
have completed. The hook must finalize hardware shutdown, release DMA
and other resources, etc.

View File

@ -234,7 +234,7 @@ process is as follows:
Linus, usually the patches that have already been included in the
-next kernel for a few weeks. The preferred way to submit big changes
is using git (the kernel's source management tool, more information
can be found at http://git.or.cz/) but plain patches are also just
can be found at http://git-scm.com/) but plain patches are also just
fine.
- After two weeks a -rc1 kernel is released it is now possible to push
only patches that do not include new features that could affect the

View File

@ -235,8 +235,7 @@ containing the following files describing that cgroup:
- cgroup.procs: list of tgids in the cgroup. This list is not
guaranteed to be sorted or free of duplicate tgids, and userspace
should sort/uniquify the list if this property is required.
Writing a tgid into this file moves all threads with that tgid into
this cgroup.
This is a read-only file, for now.
- notify_on_release flag: run the release agent on exit?
- release_agent: the path to use for release notifications (this file
exists in the top cgroup only)

View File

@ -74,6 +74,11 @@ structure at all. You should use this to keep device-specific data.
/* retrieve the value */
void *i2c_get_clientdata(const struct i2c_client *client);
Note that starting with kernel 2.6.34, you don't have to set the `data' field
to NULL in remove() or if probe() failed anymore. The i2c-core does this
automatically on these occasions. Those are also the only times the core will
touch this field.
Accessing the client
====================

View File

@ -333,14 +333,14 @@ byte 0:
byte 1:
bit 7 6 5 4 3 2 1 0
x15 x14 x13 x12 x11 x10 x9 x8
. . . . . x10 x9 x8
byte 2:
bit 7 6 5 4 3 2 1 0
x7 x6 x5 x4 x4 x2 x1 x0
x15..x0 = absolute x value (horizontal)
x10..x0 = absolute x value (horizontal)
byte 3:
@ -350,14 +350,14 @@ byte 3:
byte 4:
bit 7 6 5 4 3 2 1 0
y15 y14 y13 y12 y11 y10 y8 y8
. . . . . . y9 y8
byte 5:
bit 7 6 5 4 3 2 1 0
y7 y6 y5 y4 y3 y2 y1 y0
y15..y0 = absolute y value (vertical)
y9..y0 = absolute y value (vertical)
4.2.2 Two finger touch

View File

@ -1194,7 +1194,7 @@ and is between 256 and 4096 characters. It is defined in the file
libata.force= [LIBATA] Force configurations. The format is comma
separated list of "[ID:]VAL" where ID is
PORT[:DEVICE]. PORT and DEVICE are decimal numbers
PORT[.DEVICE]. PORT and DEVICE are decimal numbers
matching port, link or device. Basically, it matches
the ATA ID string printed on console by libata. If
the whole ID part is omitted, the last PORT and DEVICE

View File

@ -58,7 +58,7 @@ static void transfer(int fd)
};
ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
if (ret == 1)
if (ret < 1)
pabort("can't send spi message");
for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {

View File

@ -18,16 +18,15 @@ Rules on what kind of patches are accepted, and which ones are not, into the
- It cannot contain any "trivial" fixes in it (spelling changes,
whitespace cleanups, etc).
- It must follow the Documentation/SubmittingPatches rules.
- It or an equivalent fix must already exist in Linus' tree. Quote the
respective commit ID in Linus' tree in your patch submission to -stable.
- It or an equivalent fix must already exist in Linus' tree (upstream).
Procedure for submitting patches to the -stable tree:
- Send the patch, after verifying that it follows the above rules, to
stable@kernel.org.
- To have the patch automatically included in the stable tree, add the
the tag
stable@kernel.org. You must note the upstream commit ID in the changelog
of your submission.
- To have the patch automatically included in the stable tree, add the tag
Cc: stable@kernel.org
in the sign-off area. Once the patch is merged it will be applied to
the stable tree without anything else needing to be done by the author

View File

@ -1960,7 +1960,7 @@ F: lib/kobj*
DRM DRIVERS
M: David Airlie <airlied@linux.ie>
L: dri-devel@lists.sourceforge.net
L: dri-devel@lists.freedesktop.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
F: drivers/gpu/drm/
@ -4482,17 +4482,17 @@ S: Maintained
F: drivers/ata/sata_promise.*
PS3 NETWORK SUPPORT
M: Geoff Levand <geoffrey.levand@am.sony.com>
M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org
L: cbe-oss-dev@ozlabs.org
S: Supported
S: Maintained
F: drivers/net/ps3_gelic_net.*
PS3 PLATFORM SUPPORT
M: Geoff Levand <geoffrey.levand@am.sony.com>
M: Geoff Levand <geoff@infradead.org>
L: linuxppc-dev@ozlabs.org
L: cbe-oss-dev@ozlabs.org
S: Supported
S: Maintained
F: arch/powerpc/boot/ps3*
F: arch/powerpc/include/asm/lv1call.h
F: arch/powerpc/include/asm/ps3*.h
@ -4791,12 +4791,11 @@ F: drivers/s390/crypto/
S390 ZFCP DRIVER
M: Christof Schmitt <christof.schmitt@de.ibm.com>
M: Martin Peschke <mp3@de.ibm.com>
M: Swen Schillig <swen@vnet.ibm.com>
M: linux390@de.ibm.com
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
F: Documentation/s390/zfcpdump.txt
F: drivers/s390/scsi/zfcp_*
S390 IUCV NETWORK LAYER

View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 34
EXTRAVERSION = -rc5
EXTRAVERSION = -rc6
NAME = Sheep on Meth
# *DOCUMENTATION*

View File

@ -253,6 +253,7 @@ config ARCH_REALVIEW
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
select GPIO_PL061 if GPIOLIB
help
This enables support for ARM Ltd RealView boards.

View File

@ -1,13 +1,13 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.31-rc3
# Fri Jul 17 12:07:28 2009
# Linux kernel version: 2.6.34-rc2
# Mon Mar 29 12:01:41 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@ -18,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@ -32,6 +33,12 @@ CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
@ -43,21 +50,22 @@ CONFIG_SYSVIPC_SYSCTL=y
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
@ -75,19 +83,21 @@ CONFIG_FUTEX=y
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
# CONFIG_AIO is not set
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_PERF_USE_VMALLOC=y
#
# Performance Counters
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_VM_EVENT_COUNTERS is not set
# CONFIG_SLUB_DEBUG is not set
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
@ -115,24 +125,53 @@ CONFIG_LBDAF=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
CONFIG_ARCH_BCMRING=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
@ -149,6 +188,7 @@ CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
@ -157,19 +197,26 @@ CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_SHMOBILE is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_S5P6440 is not set
# CONFIG_ARCH_S5P6442 is not set
# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_S5PV210 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_U8500 is not set
# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
CONFIG_ARCH_BCMRING=y
# CONFIG_ARCH_FPGA11107 is not set
CONFIG_ARCH_BCM11107=y
@ -185,7 +232,7 @@ CONFIG_CPU_V6=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_PABRT_V6=y
CONFIG_CPU_CACHE_V6=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
@ -201,6 +248,8 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_CPU_HAS_PMU=y
# CONFIG_ARM_ERRATA_411920 is not set
CONFIG_COMMON_CLKDEV=y
@ -222,6 +271,8 @@ CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
@ -229,6 +280,7 @@ CONFIG_AEABI=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_HW_PERF_EVENTS=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@ -240,8 +292,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
CONFIG_UACCESS_WITH_MEMCPY=y
@ -335,9 +386,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_TESTS is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@ -433,6 +484,10 @@ CONFIG_MTD_NAND_BCM_UMI_HWCS=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
@ -444,6 +499,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@ -452,6 +508,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
@ -459,6 +516,7 @@ CONFIG_HAVE_IDE=y
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
@ -508,6 +566,7 @@ CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
@ -519,13 +578,17 @@ CONFIG_LEGACY_PTY_COUNT=64
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@ -541,6 +604,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
@ -566,14 +630,17 @@ CONFIG_DUMMY_CONSOLE=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
@ -589,9 +656,12 @@ CONFIG_FS_POSIX_ACL=y
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_FSNOTIFY is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_INOTIFY_USER is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@ -647,6 +717,7 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@ -657,7 +728,6 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
@ -675,11 +745,12 @@ CONFIG_MSDOS_PARTITION=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
@ -693,6 +764,7 @@ CONFIG_TRACING_SUPPORT=y
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_ARM_UNWIND is not set
# CONFIG_DEBUG_USER is not set
# CONFIG_OC_ETM is not set
#
# Security options
@ -700,7 +772,11 @@ CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
# CONFIG_CRYPTO is not set
# CONFIG_BINARY_PRINTF is not set

View File

@ -1058,7 +1058,6 @@ CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set

View File

@ -661,7 +661,7 @@ CONFIG_DEVKMEM=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y

View File

@ -680,7 +680,7 @@ CONFIG_DEVKMEM=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y

View File

@ -59,8 +59,6 @@ CONFIG_FAIR_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@ -480,7 +478,6 @@ CONFIG_BT_HIDP=m
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set

View File

@ -149,10 +149,10 @@
#define USER(x...) \
9999: x; \
.section __ex_table,"a"; \
.pushsection __ex_table,"a"; \
.align 3; \
.long 9999b,9001f; \
.previous
.popsection
/*
* SMP data memory barrier
@ -193,10 +193,10 @@
.error "Unsupported inc macro argument"
.endif
.section __ex_table,"a"
.pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
.previous
.popsection
.endm
.macro usracc, instr, reg, ptr, inc, cond, rept, abort
@ -234,10 +234,10 @@
.error "Unsupported inc macro argument"
.endif
.section __ex_table,"a"
.pushsection __ex_table,"a"
.align 3
.long 9999b, \abort
.previous
.popsection
.endr
.endm

View File

@ -21,14 +21,14 @@
"2: strt %0, [%2]\n" \
" mov %0, #0\n" \
"3:\n" \
" .section __ex_table,\"a\"\n" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4f, 2b, 4f\n" \
" .previous\n" \
" .section .fixup,\"ax\"\n" \
" .popsection\n" \
" .pushsection .fixup,\"ax\"\n" \
"4: mov %0, %4\n" \
" b 3b\n" \
" .previous" \
" .popsection" \
: "=&r" (ret), "=&r" (oldval) \
: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \
: "cc", "memory")
@ -102,14 +102,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
" it eq @ explicit IT needed for the 2b label\n"
"2: streqt %2, [%3]\n"
"3:\n"
" .section __ex_table,\"a\"\n"
" .pushsection __ex_table,\"a\"\n"
" .align 3\n"
" .long 1b, 4f, 2b, 4f\n"
" .previous\n"
" .section .fixup,\"ax\"\n"
" .popsection\n"
" .pushsection .fixup,\"ax\"\n"
"4: mov %0, %4\n"
" b 3b\n"
" .previous"
" .popsection"
: "=&r" (val)
: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
: "cc", "memory");

View File

@ -229,16 +229,16 @@ do { \
__asm__ __volatile__( \
"1: ldrbt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" mov %1, #0\n" \
" b 2b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .popsection\n" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
" .previous" \
" .popsection" \
: "+r" (err), "=&r" (x) \
: "r" (addr), "i" (-EFAULT) \
: "cc")
@ -265,16 +265,16 @@ do { \
__asm__ __volatile__( \
"1: ldrt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" mov %1, #0\n" \
" b 2b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .popsection\n" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
" .previous" \
" .popsection" \
: "+r" (err), "=&r" (x) \
: "r" (addr), "i" (-EFAULT) \
: "cc")
@ -310,15 +310,15 @@ do { \
__asm__ __volatile__( \
"1: strbt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" b 2b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .popsection\n" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
" .previous" \
" .popsection" \
: "+r" (err) \
: "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
: "cc")
@ -343,15 +343,15 @@ do { \
__asm__ __volatile__( \
"1: strt %1,[%2]\n" \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, %3\n" \
" b 2b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .popsection\n" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
" .previous" \
" .popsection" \
: "+r" (err) \
: "r" (x), "r" (__pu_addr), "i" (-EFAULT) \
: "cc")
@ -371,16 +371,16 @@ do { \
THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \
THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \
"3:\n" \
" .section .fixup,\"ax\"\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"4: mov %0, %3\n" \
" b 3b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .popsection\n" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4b\n" \
" .long 2b, 4b\n" \
" .previous" \
" .popsection" \
: "+r" (err), "+r" (__pu_addr) \
: "r" (x), "i" (-EFAULT) \
: "cc")

View File

@ -523,16 +523,16 @@ ENDPROC(__und_usr)
/*
* The out of line fixup for the ldrt above.
*/
.section .fixup, "ax"
.pushsection .fixup, "ax"
4: mov pc, r9
.previous
.section __ex_table,"a"
.popsection
.pushsection __ex_table,"a"
.long 1b, 4b
#if __LINUX_ARM_ARCH__ >= 7
.long 2b, 4b
.long 3b, 4b
#endif
.previous
.popsection
/*
* Check whether the instruction is a co-processor instruction.
@ -679,7 +679,7 @@ do_fpe:
.data
ENTRY(fp_enter)
.word no_fp
.previous
.text
ENTRY(no_fp)
mov pc, lr

View File

@ -62,15 +62,15 @@ int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
" movne %0, #2 \n"
"3:\n"
".section .fixup, \"ax\"\n"
".pushsection .fixup, \"ax\"\n"
"4: mov %0, #1 \n"
" b 3b \n"
".previous\n"
".popsection\n"
".section __ex_table, \"a\"\n"
".pushsection __ex_table, \"a\"\n"
" .long 1b, 4b \n"
" .long 2b, 4b \n"
".previous\n"
".popsection\n"
: "=r"(err), "=r"(replaced)
: "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)

View File

@ -355,7 +355,7 @@ EXPORT_SYMBOL(dump_fpu);
* the thread function, and r3 points to the exit function.
*/
extern void kernel_thread_helper(void);
asm( ".section .text\n"
asm( ".pushsection .text\n"
" .align\n"
" .type kernel_thread_helper, #function\n"
"kernel_thread_helper:\n"
@ -363,11 +363,11 @@ asm( ".section .text\n"
" mov lr, r3\n"
" mov pc, r2\n"
" .size kernel_thread_helper, . - kernel_thread_helper\n"
" .previous");
" .popsection");
#ifdef CONFIG_ARM_UNWIND
extern void kernel_thread_exit(long code);
asm( ".section .text\n"
asm( ".pushsection .text\n"
" .align\n"
" .type kernel_thread_exit, #function\n"
"kernel_thread_exit:\n"
@ -377,7 +377,7 @@ asm( ".section .text\n"
" nop\n"
" .fnend\n"
" .size kernel_thread_exit, . - kernel_thread_exit\n"
" .previous");
" .popsection");
#else
#define kernel_thread_exit do_exit
#endif

View File

@ -110,13 +110,13 @@ no_frame: ldmfd sp!, {r4 - r8, pc}
ENDPROC(__backtrace)
ENDPROC(c_backtrace)
.section __ex_table,"a"
.pushsection __ex_table,"a"
.align 3
.long 1001b, 1006b
.long 1002b, 1006b
.long 1003b, 1006b
.long 1004b, 1006b
.previous
.popsection
#define instr r4
#define reg r5

View File

@ -46,8 +46,8 @@ USER( strnebt r2, [r0])
ldmfd sp!, {r1, pc}
ENDPROC(__clear_user)
.section .fixup,"ax"
.pushsection .fixup,"ax"
.align 0
9001: ldmfd sp!, {r0, pc}
.previous
.popsection

View File

@ -90,7 +90,7 @@ ENTRY(__copy_from_user)
ENDPROC(__copy_from_user)
.section .fixup,"ax"
.pushsection .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2}
@ -100,5 +100,5 @@ ENDPROC(__copy_from_user)
bl __memzero
ldr r0, [sp], #4
copy_abort_end
.previous
.popsection

View File

@ -94,12 +94,12 @@ WEAK(__copy_to_user)
ENDPROC(__copy_to_user)
.section .fixup,"ax"
.pushsection .fixup,"ax"
.align 0
copy_abort_preamble
ldmfd sp!, {r1, r2, r3}
sub r0, r0, r1
rsb r0, r0, r2
copy_abort_end
.previous
.popsection

View File

@ -68,7 +68,7 @@
* so properly, we would have to add in whatever registers were loaded before
* the fault, which, with the current asm above is not predictable.
*/
.section .fixup,"ax"
.pushsection .fixup,"ax"
.align 4
9001: mov r4, #-EFAULT
ldr r5, [fp, #4] @ *err_ptr
@ -80,4 +80,4 @@
strneb r0, [r1], #1
bne 9002b
load_regs
.previous
.popsection

View File

@ -64,9 +64,9 @@ __get_user_bad:
mov pc, lr
ENDPROC(__get_user_bad)
.section __ex_table, "a"
.pushsection __ex_table, "a"
.long 1b, __get_user_bad
.long 2b, __get_user_bad
.long 3b, __get_user_bad
.long 4b, __get_user_bad
.previous
.popsection

View File

@ -81,11 +81,11 @@ __put_user_bad:
mov pc, lr
ENDPROC(__put_user_bad)
.section __ex_table, "a"
.pushsection __ex_table, "a"
.long 1b, __put_user_bad
.long 2b, __put_user_bad
.long 3b, __put_user_bad
.long 4b, __put_user_bad
.long 5b, __put_user_bad
.long 6b, __put_user_bad
.previous
.popsection

View File

@ -33,11 +33,11 @@ ENTRY(__strncpy_from_user)
mov pc, lr
ENDPROC(__strncpy_from_user)
.section .fixup,"ax"
.pushsection .fixup,"ax"
.align 0
9001: mov r3, #0
strb r3, [r0, #0] @ null terminate
mov r0, #-EFAULT
mov pc, lr
.previous
.popsection

View File

@ -33,8 +33,8 @@ ENTRY(__strnlen_user)
mov pc, lr
ENDPROC(__strnlen_user)
.section .fixup,"ax"
.pushsection .fixup,"ax"
.align 0
9001: mov r0, #0
mov pc, lr
.previous
.popsection

View File

@ -279,10 +279,10 @@ USER( strgtbt r3, [r0], #1) @ May fault
b .Lc2u_finished
ENDPROC(__copy_to_user)
.section .fixup,"ax"
.pushsection .fixup,"ax"
.align 0
9001: ldmfd sp!, {r0, r4 - r7, pc}
.previous
.popsection
/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
* Purpose : copy a block from user memory to kernel memory
@ -545,7 +545,7 @@ USER( ldrgtbt r3, [r1], #1) @ May fault
b .Lcfu_finished
ENDPROC(__copy_from_user)
.section .fixup,"ax"
.pushsection .fixup,"ax"
.align 0
/*
* We took an exception. r0 contains a pointer to
@ -559,5 +559,5 @@ ENDPROC(__copy_from_user)
blne __memzero
mov r0, r4
ldmfd sp!, {r4 - r7, pc}
.previous
.popsection

View File

@ -68,12 +68,6 @@ struct sys_timer omap_timer;
* ---------------------------------------------------------------------------
*/
#if defined(CONFIG_ARCH_OMAP16XX)
#define TIMER_32K_SYNCHRONIZED 0xfffbc410
#else
#error OMAP 32KHz timer does not currently work on 15XX!
#endif
/* 16xx specific defines */
#define OMAP1_32K_TIMER_BASE 0xfffb9000
#define OMAP1_32K_TIMER_CR 0x08
@ -150,15 +144,6 @@ static struct clock_event_device clockevent_32k_timer = {
.set_mode = omap_32k_timer_set_mode,
};
/*
* The 32KHz synchronized timer is an additional timer on 16xx.
* It is always running.
*/
static inline unsigned long omap_32k_sync_timer_read(void)
{
return omap_readl(TIMER_32K_SYNCHRONIZED);
}
static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clockevent_32k_timer;

View File

@ -59,8 +59,10 @@ config MACH_OMAP3_BEAGLE
select OMAP_PACKAGE_CBB
config MACH_DEVKIT8000
bool "DEVKIT8000 board"
depends on ARCH_OMAP3
bool "DEVKIT8000 board"
depends on ARCH_OMAP3
select OMAP_PACKAGE_CUS
select OMAP_MUX
config MACH_OMAP_LDP
bool "OMAP3 LDP board"

View File

@ -96,6 +96,7 @@ static struct omap_board_mux board_mux[] __initdata = {
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_serial_init();
zoom_peripherals_init();
board_smc91x_init();
enable_board_wakeup_source();

View File

@ -294,9 +294,9 @@ static struct omap_board_mux board_mux[] __initdata = {
static void __init am3517_evm_init(void)
{
am3517_evm_i2c_init();
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
am3517_evm_i2c_init();
platform_add_devices(am3517_evm_devices,
ARRAY_SIZE(am3517_evm_devices));

View File

@ -50,7 +50,6 @@
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/usb/otg.h>
#include <linux/dm9000.h>
#include <linux/interrupt.h>
@ -269,20 +268,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
devkit8000_vmmc1_supply.dev = mmc[0].dev;
devkit8000_vsim_supply.dev = mmc[0].dev;
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
gpio_request(gpio + 1, "EHCI_nOC");
gpio_direction_input(gpio + 1);
/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
return 0;
}
@ -303,7 +288,7 @@ static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
.dev = &devkit8000_lcd_device.dev,
},
{
.supply = "vdss_dsi",
.supply = "vdds_dsi",
.dev = &devkit8000_dss_device.dev,
}
};
@ -639,17 +624,21 @@ static struct omap_musb_board_data musb_board_data = {
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = 147,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL
};
static void __init devkit8000_init(void)
{
omap_serial_init();
omap_dm9000_init();
devkit8000_i2c_init();
platform_add_devices(devkit8000_devices,
ARRAY_SIZE(devkit8000_devices));
@ -659,25 +648,15 @@ static void __init devkit8000_init(void)
spi_register_board_info(devkit8000_spi_board_info,
ARRAY_SIZE(devkit8000_spi_board_info));
omap_serial_init();
omap_dm9000_init();
devkit8000_ads7846_init();
omap_mux_init_gpio(170, OMAP_PIN_INPUT);
gpio_request(170, "DVI_nPD");
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
devkit8000_flash_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
}
static void __init devkit8000_map_io(void)

View File

@ -458,13 +458,13 @@ static struct omap_musb_board_data musb_board_data = {
};
static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET,
.reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET,
.reset_gpio_port[1] = -EINVAL,
.reset_gpio_port[2] = -EINVAL,
};

View File

@ -216,7 +216,7 @@ static void __init n8x0_onenand_init(void) {}
*/
#define N8X0_SLOT_SWITCH_GPIO 96
#define N810_EMMC_VSD_GPIO 23
#define NN810_EMMC_VIO_GPIO 9
#define N810_EMMC_VIO_GPIO 9
static int n8x0_mmc_switch_slot(struct device *dev, int slot)
{
@ -304,10 +304,10 @@ static void n810_set_power_emmc(struct device *dev,
if (power_on) {
gpio_set_value(N810_EMMC_VSD_GPIO, 1);
msleep(1);
gpio_set_value(NN810_EMMC_VIO_GPIO, 1);
gpio_set_value(N810_EMMC_VIO_GPIO, 1);
msleep(1);
} else {
gpio_set_value(NN810_EMMC_VIO_GPIO, 0);
gpio_set_value(N810_EMMC_VIO_GPIO, 0);
msleep(50);
gpio_set_value(N810_EMMC_VSD_GPIO, 0);
msleep(50);
@ -468,7 +468,7 @@ static void n8x0_mmc_cleanup(struct device *dev)
if (machine_is_nokia_n810()) {
gpio_free(N810_EMMC_VSD_GPIO);
gpio_free(NN810_EMMC_VIO_GPIO);
gpio_free(N810_EMMC_VIO_GPIO);
}
}
@ -529,7 +529,7 @@ void __init n8x0_mmc_init(void)
err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch");
if (err)
return err;
return;
gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0);
@ -537,17 +537,17 @@ void __init n8x0_mmc_init(void)
err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf");
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
return err;
return;
}
gpio_direction_output(N810_EMMC_VSD_GPIO, 0);
err = gpio_request(NN810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd");
if (err) {
gpio_free(N8X0_SLOT_SWITCH_GPIO);
gpio_free(N810_EMMC_VSD_GPIO);
return err;
return;
}
gpio_direction_output(NN810_EMMC_VIO_GPIO, 0);
gpio_direction_output(N810_EMMC_VIO_GPIO, 0);
}
mmc_data[0] = &mmc1_data;

View File

@ -253,20 +253,20 @@ void __init sdp_flash_init(struct flash_partitions sdp_partition_info[])
}
if (norcs > GPMC_CS_NUM)
printk(KERN_INFO "OneNAND: Unable to find configuration "
" in GPMC\n ");
printk(KERN_INFO "NOR: Unable to find configuration "
"in GPMC\n");
else
board_nor_init(sdp_partition_info[0], norcs);
if (onenandcs > GPMC_CS_NUM)
printk(KERN_INFO "OneNAND: Unable to find configuration "
" in GPMC\n ");
"in GPMC\n");
else
board_onenand_init(sdp_partition_info[1], onenandcs);
if (nandcs > GPMC_CS_NUM)
printk(KERN_INFO "NAND: Unable to find configuration "
" in GPMC\n ");
"in GPMC\n");
else
board_nand_init(sdp_partition_info[2], nandcs);
}

View File

@ -96,7 +96,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
static struct platform_device zoom_debugboard_serial_device = {
.name = "serial8250",
.id = 3,
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},

View File

@ -280,7 +280,6 @@ static void enable_board_wakeup_source(void)
void __init zoom_peripherals_init(void)
{
omap_i2c_init();
omap_serial_init();
usb_musb_init(&musb_board_data);
enable_board_wakeup_source();
}

View File

@ -895,7 +895,7 @@ static struct clk dpll4_m4x2_ck = {
.ops = &clkops_omap2_dflt_wait,
.parent = &dpll4_m4_ck,
.enable_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
.enable_bit = OMAP3430_PWRDN_CAM_SHIFT,
.enable_bit = OMAP3430_PWRDN_DSS1_SHIFT,
.flags = INVERT_ENABLE,
.clkdm_name = "dpll4_clkdm",
.recalc = &omap3_clkoutx2_recalc,

View File

@ -2671,10 +2671,10 @@ static struct omap_clk omap44xx_clks[] = {
CLK("omap-mcbsp.2", "ick", &dummy_ck, CK_443X),
CLK("omap-mcbsp.3", "ick", &dummy_ck, CK_443X),
CLK("omap-mcbsp.4", "ick", &dummy_ck, CK_443X),
CLK("omap-mcspi.1", "ick", &dummy_ck, CK_443X),
CLK("omap-mcspi.2", "ick", &dummy_ck, CK_443X),
CLK("omap-mcspi.3", "ick", &dummy_ck, CK_443X),
CLK("omap-mcspi.4", "ick", &dummy_ck, CK_443X),
CLK("omap2_mcspi.1", "ick", &dummy_ck, CK_443X),
CLK("omap2_mcspi.2", "ick", &dummy_ck, CK_443X),
CLK("omap2_mcspi.3", "ick", &dummy_ck, CK_443X),
CLK("omap2_mcspi.4", "ick", &dummy_ck, CK_443X),
CLK(NULL, "uart1_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart2_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart3_ick", &dummy_ck, CK_443X),

View File

@ -240,7 +240,7 @@ static void _omap2_clkdm_set_hwsup(struct clockdomain *clkdm, int enable)
bits = OMAP24XX_CLKSTCTRL_ENABLE_AUTO;
else
bits = OMAP24XX_CLKSTCTRL_DISABLE_AUTO;
} else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (enable)
bits = OMAP34XX_CLKSTCTRL_ENABLE_AUTO;
else
@ -812,7 +812,7 @@ int omap2_clkdm_sleep(struct clockdomain *clkdm)
cm_set_mod_reg_bits(OMAP24XX_FORCESTATE,
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
} else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_SLEEP <<
__ffs(clkdm->clktrctrl_mask));
@ -856,7 +856,7 @@ int omap2_clkdm_wakeup(struct clockdomain *clkdm)
cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE,
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
} else if (cpu_is_omap34xx() | cpu_is_omap44xx()) {
} else if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
u32 bits = (OMAP34XX_CLKSTCTRL_FORCE_WAKEUP <<
__ffs(clkdm->clktrctrl_mask));

View File

@ -726,7 +726,7 @@ void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
irq = OMAP44XX_IRQ_MMC4;
irq = OMAP44XX_IRQ_MMC5;
break;
default:
continue;

View File

@ -39,6 +39,9 @@ static int omap2_nand_gpmc_retime(void)
struct gpmc_timings t;
int err;
if (!gpmc_nand_data->gpmc_t)
return 0;
memset(&t, 0, sizeof(t));
t.sync_clk = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->sync_clk);
t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);

View File

@ -52,7 +52,7 @@ omap_irq_base: .word 0
mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
and \tmp, \tmp, #0x000f0000 @ only check architecture
cmp \tmp, #0x00060000 @ is v6?
cmp \tmp, #0x00070000 @ is v6?
beq 2400f @ found v6 so it's omap24xx
mrc p15, 0, \tmp, c0, c0, 0 @ get processor revision
and \tmp, \tmp, #0x000000f0 @ check cortex 8 or 9

View File

@ -33,7 +33,7 @@
ENTRY(omap_secondary_startup)
hold: ldr r12,=0x103
dsb
smc @ read from AuxCoreBoot0
smc #0 @ read from AuxCoreBoot0
mov r0, r0, lsr #9
mrc p15, 0, r4, c0, c0, 5
and r4, r4, #0x0f
@ -52,7 +52,7 @@ ENTRY(omap_modify_auxcoreboot0)
stmfd sp!, {r1-r12, lr}
ldr r12, =0x104
dsb
smc
smc #0
ldmfd sp!, {r1-r12, pc}
END(omap_modify_auxcoreboot0)
@ -60,6 +60,6 @@ ENTRY(omap_auxcoreboot_addr)
stmfd sp!, {r2-r12, lr}
ldr r12, =0x105
dsb
smc
smc #0
ldmfd sp!, {r2-r12, pc}
END(omap_auxcoreboot_addr)

View File

@ -27,6 +27,6 @@ ENTRY(omap_smc1)
mov r12, r0
mov r0, r1
dsb
smc
smc #0
ldmfd sp!, {r2-r12, pc}
END(omap_smc1)

View File

@ -1511,6 +1511,9 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
c = oh->slaves[oh->_mpu_port_index]->_clk;
}
if (!c->clkdm)
return NULL;
return c->clkdm->pwrdm.ptr;
}

View File

@ -222,7 +222,7 @@ void pwrdm_init(struct powerdomain **pwrdm_list)
{
struct powerdomain **p = NULL;
if (cpu_is_omap24xx() | cpu_is_omap34xx()) {
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
pwrstctrl_reg_offs = OMAP2_PM_PWSTCTRL;
pwrstst_reg_offs = OMAP2_PM_PWSTST;
} else if (cpu_is_omap44xx()) {

View File

@ -123,7 +123,7 @@ struct omap3_prcm_regs prcm_context;
u32 omap_prcm_get_reset_sources(void)
{
/* XXX This presumably needs modification for 34XX */
if (cpu_is_omap24xx() | cpu_is_omap34xx())
if (cpu_is_omap24xx() || cpu_is_omap34xx())
return prm_read_mod_reg(WKUP_MOD, OMAP2_RM_RSTST) & 0x7f;
if (cpu_is_omap44xx())
return prm_read_mod_reg(WKUP_MOD, OMAP4_RM_RSTST) & 0x7f;
@ -157,7 +157,7 @@ void omap_prcm_arch_reset(char mode, const char *cmd)
else
WARN_ON(1);
if (cpu_is_omap24xx() | cpu_is_omap34xx())
if (cpu_is_omap24xx() || cpu_is_omap34xx())
prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs,
OMAP2_RM_RSTCTRL);
if (cpu_is_omap44xx())

View File

@ -115,7 +115,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
}
};
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct plat_serial8250_port serial_platform_data3[] = {
{
.irq = 70,
@ -128,23 +127,12 @@ static struct plat_serial8250_port serial_platform_data3[] = {
}
};
static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
{
serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
}
#else
static inline void omap2_set_globals_uart4(struct omap_globals *omap2_globals)
{
}
#endif
void __init omap2_set_globals_uart(struct omap_globals *omap2_globals)
{
serial_platform_data0[0].mapbase = omap2_globals->uart1_phys;
serial_platform_data1[0].mapbase = omap2_globals->uart2_phys;
serial_platform_data2[0].mapbase = omap2_globals->uart3_phys;
if (cpu_is_omap3630() || cpu_is_omap44xx())
omap2_set_globals_uart4(omap2_globals);
serial_platform_data3[0].mapbase = omap2_globals->uart4_phys;
}
static inline unsigned int __serial_read_reg(struct uart_port *up,
@ -550,7 +538,7 @@ static ssize_t sleep_timeout_store(struct device *dev,
unsigned int value;
if (sscanf(buf, "%u", &value) != 1) {
printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
dev_err(dev, "sleep_timeout_store: Invalid value\n");
return -EINVAL;
}
@ -664,27 +652,33 @@ void __init omap_serial_early_init(void)
struct device *dev = &pdev->dev;
struct plat_serial8250_port *p = dev->platform_data;
/* Don't map zero-based physical address */
if (p->mapbase == 0) {
dev_warn(dev, "no physical address for uart#%d,"
" so skipping early_init...\n", i);
continue;
}
/*
* Module 4KB + L4 interconnect 4KB
* Static mapping, never released
*/
p->membase = ioremap(p->mapbase, SZ_8K);
if (!p->membase) {
printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
dev_err(dev, "ioremap failed for uart%i\n", i + 1);
continue;
}
sprintf(name, "uart%d_ick", i + 1);
uart->ick = clk_get(NULL, name);
if (IS_ERR(uart->ick)) {
printk(KERN_ERR "Could not get uart%d_ick\n", i + 1);
dev_err(dev, "Could not get uart%d_ick\n", i + 1);
uart->ick = NULL;
}
sprintf(name, "uart%d_fck", i+1);
uart->fck = clk_get(NULL, name);
if (IS_ERR(uart->fck)) {
printk(KERN_ERR "Could not get uart%d_fck\n", i + 1);
dev_err(dev, "Could not get uart%d_fck\n", i + 1);
uart->fck = NULL;
}
@ -727,6 +721,13 @@ void __init omap_serial_init_port(int port)
pdev = &uart->pdev;
dev = &pdev->dev;
/* Don't proceed if there's no clocks available */
if (unlikely(!uart->ick || !uart->fck)) {
WARN(1, "%s: can't init uart%d, no clocks available\n",
kobject_name(&dev->kobj), port);
return;
}
omap_uart_enable_clocks(uart);
omap_uart_reset(uart);

View File

@ -254,7 +254,7 @@ static unsigned int realview_mmc_status(struct device *dev)
else
mask = 2;
return readl(REALVIEW_SYSMCI) & mask;
return !(readl(REALVIEW_SYSMCI) & mask);
}
struct mmci_platform_data realview_mmc0_plat_data = {

View File

@ -166,15 +166,15 @@ union offset_union {
THUMB( "1: "ins" %1, [%2]\n" ) \
THUMB( " add %2, %2, #1\n" ) \
"2:\n" \
" .section .fixup,\"ax\"\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"3: mov %0, #1\n" \
" b 2b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .popsection\n" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 3b\n" \
" .previous\n" \
" .popsection\n" \
: "=r" (err), "=&r" (val), "=r" (addr) \
: "0" (err), "2" (addr))
@ -226,16 +226,16 @@ union offset_union {
" mov %1, %1, "NEXT_BYTE"\n" \
"2: "ins" %1, [%2]\n" \
"3:\n" \
" .section .fixup,\"ax\"\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"4: mov %0, #1\n" \
" b 3b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .popsection\n" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 4b\n" \
" .long 2b, 4b\n" \
" .previous\n" \
" .popsection\n" \
: "=r" (err), "=&r" (v), "=&r" (a) \
: "0" (err), "1" (v), "2" (a)); \
if (err) \
@ -266,18 +266,18 @@ union offset_union {
" mov %1, %1, "NEXT_BYTE"\n" \
"4: "ins" %1, [%2]\n" \
"5:\n" \
" .section .fixup,\"ax\"\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
"6: mov %0, #1\n" \
" b 5b\n" \
" .previous\n" \
" .section __ex_table,\"a\"\n" \
" .popsection\n" \
" .pushsection __ex_table,\"a\"\n" \
" .align 3\n" \
" .long 1b, 6b\n" \
" .long 2b, 6b\n" \
" .long 3b, 6b\n" \
" .long 4b, 6b\n" \
" .previous\n" \
" .popsection\n" \
: "=r" (err), "=&r" (v), "=&r" (a) \
: "0" (err), "1" (v), "2" (a)); \
if (err) \

View File

@ -45,7 +45,7 @@ ENTRY(cpu_sa1100_proc_init)
mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland
mov pc, lr
.previous
.section .text
/*
* cpu_sa1100_proc_fin()

View File

@ -111,12 +111,12 @@ next:
@ to fault. Emit the appropriate exception gunk to fix things up.
@ ??? For some reason, faults can happen at .Lx2 even with a
@ plain LDR instruction. Weird, but it seems harmless.
.section .fixup,"ax"
.pushsection .fixup,"ax"
.align 2
.Lfix: mov pc, r9 @ let the user eat segfaults
.previous
.popsection
.section __ex_table,"a"
.pushsection __ex_table,"a"
.align 3
.long .Lx1, .Lfix
.previous
.popsection

View File

@ -44,9 +44,6 @@
#define NO_LENGTH_CHECK 0xffffffff
unsigned char omap_bootloader_tag[512];
int omap_bootloader_tag_len;
struct omap_board_config_kernel *omap_board_config;
int omap_board_config_size;
@ -100,10 +97,17 @@ EXPORT_SYMBOL(omap_get_var_config);
#include <linux/clocksource.h>
/*
* offset_32k holds the init time counter value. It is then subtracted
* from every counter read to achieve a counter that counts time from the
* kernel boot (needed for sched_clock()).
*/
static u32 offset_32k __read_mostly;
#ifdef CONFIG_ARCH_OMAP16XX
static cycle_t omap16xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k;
}
#else
#define omap16xx_32k_read NULL
@ -112,7 +116,7 @@ static cycle_t omap16xx_32k_read(struct clocksource *cs)
#ifdef CONFIG_ARCH_OMAP2420
static cycle_t omap2420_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap2420_32k_read NULL
@ -121,7 +125,7 @@ static cycle_t omap2420_32k_read(struct clocksource *cs)
#ifdef CONFIG_ARCH_OMAP2430
static cycle_t omap2430_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap2430_32k_read NULL
@ -130,7 +134,7 @@ static cycle_t omap2430_32k_read(struct clocksource *cs)
#ifdef CONFIG_ARCH_OMAP3
static cycle_t omap34xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap34xx_32k_read NULL
@ -139,7 +143,7 @@ static cycle_t omap34xx_32k_read(struct clocksource *cs)
#ifdef CONFIG_ARCH_OMAP4
static cycle_t omap44xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k;
}
#else
#define omap44xx_32k_read NULL
@ -227,6 +231,8 @@ static int __init omap_init_clocksource_32k(void)
clocksource_32k.mult = clocksource_hz2mult(32768,
clocksource_32k.shift);
offset_32k = clocksource_32k.read(&clocksource_32k);
if (clocksource_register(&clocksource_32k))
printk(err, clocksource_32k.name);
}

View File

@ -937,6 +937,15 @@ void omap_start_dma(int lch)
{
u32 l;
/*
* The CPC/CDAC register needs to be initialized to zero
* before starting dma transfer.
*/
if (cpu_is_omap15xx())
dma_write(0, CPC(lch));
else
dma_write(0, CDAC(lch));
if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
int next_lch, cur_lch;
char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];

View File

@ -798,7 +798,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_MPUIO:
reg += OMAP_MPUIO_GPIO_INT_EDGE;
l = __raw_readl(reg);
if (trigger & IRQ_TYPE_EDGE_BOTH)
if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
@ -812,7 +812,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_GPIO_1510:
reg += OMAP1510_GPIO_INT_CONTROL;
l = __raw_readl(reg);
if (trigger & IRQ_TYPE_EDGE_BOTH)
if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;
@ -846,7 +846,7 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
case METHOD_GPIO_7XX:
reg += OMAP7XX_GPIO_INT_CONTROL;
l = __raw_readl(reg);
if (trigger & IRQ_TYPE_EDGE_BOTH)
if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
bank->toggle_mask |= 1 << gpio;
if (trigger & IRQ_TYPE_EDGE_RISING)
l |= 1 << gpio;

View File

@ -345,8 +345,6 @@
#define INT_34XX_MMC3_IRQ 94
#define INT_34XX_GPT12_IRQ 95
#define INT_34XX_BENCH_MPU_EMUL 3
#define INT_35XX_HECC0_IRQ 24
#define INT_35XX_HECC1_IRQ 28
#define INT_35XX_EMAC_C0_RXTHRESH_IRQ 67

View File

@ -59,7 +59,7 @@
#define OMAP44XX_MCBSP1_BASE 0x49022000
#define OMAP44XX_MCBSP2_BASE 0x49024000
#define OMAP44XX_MCBSP3_BASE 0x49026000
#define OMAP44XX_MCBSP4_BASE 0x48074000
#define OMAP44XX_MCBSP4_BASE 0x48096000
#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)

View File

@ -29,4 +29,11 @@ struct omap_nand_platform_data {
/* size (4 KiB) for IO mapping */
#define NAND_IO_SIZE SZ_4K
#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern int gpmc_nand_init(struct omap_nand_platform_data *d);
#else
static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
{
return 0;
}
#endif

View File

@ -32,7 +32,7 @@
#define OMAP4430_PRM_BASE 0x4a306000
#define OMAP44XX_GPMC_BASE 0x50000000
#define OMAP443X_SCM_BASE 0x4a002000
#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE
#define OMAP443X_CTRL_BASE 0x4a100000
#define OMAP44XX_IC_BASE 0x48200000
#define OMAP44XX_IVA_INTC_BASE 0x40000000
#define IRQ_SIR_IRQ 0x0040

View File

@ -294,8 +294,8 @@ struct omap_hwmod_class_sysconfig {
u16 rev_offs;
u16 sysc_offs;
u16 syss_offs;
u16 sysc_flags;
u8 idlemodes;
u8 sysc_flags;
u8 clockact;
struct omap_hwmod_sysc_fields *sysc_fields;
};

View File

@ -46,7 +46,7 @@ struct ehci_hcd_omap_platform_data {
struct omap_musb_board_data {
u8 interface_type;
u8 mode;
u8 power;
u16 power;
};
enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};

View File

@ -28,7 +28,7 @@ static struct pt_regs *get_user_regs(struct task_struct *tsk)
THREAD_SIZE - sizeof(struct pt_regs));
}
static void user_enable_single_step(struct task_struct *tsk)
void user_enable_single_step(struct task_struct *tsk)
{
pr_debug("user_enable_single_step: pid=%u, PC=0x%08lx, SR=0x%08lx\n",
tsk->pid, task_pt_regs(tsk)->pc, task_pt_regs(tsk)->sr);

View File

@ -1802,7 +1802,8 @@ static int kvm_ia64_sync_dirty_log(struct kvm *kvm,
{
struct kvm_memory_slot *memslot;
int r, i;
long n, base;
long base;
unsigned long n;
unsigned long *dirty_bitmap = (unsigned long *)(kvm->arch.vm_base +
offsetof(struct kvm_vm_data, kvm_mem_dirty_log));
@ -1815,7 +1816,7 @@ static int kvm_ia64_sync_dirty_log(struct kvm *kvm,
if (!memslot->dirty_bitmap)
goto out;
n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
n = kvm_dirty_bitmap_bytes(memslot);
base = memslot->base_gfn / BITS_PER_LONG;
for (i = 0; i < n/sizeof(long); ++i) {
@ -1831,7 +1832,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
struct kvm_dirty_log *log)
{
int r;
int n;
unsigned long n;
struct kvm_memory_slot *memslot;
int is_dirty = 0;
@ -1850,7 +1851,7 @@ int kvm_vm_ioctl_get_dirty_log(struct kvm *kvm,
if (is_dirty) {
kvm_flush_remote_tlbs(kvm);
memslot = &kvm->memslots->memslots[log->slot];
n = ALIGN(memslot->npages, BITS_PER_LONG) / 8;
n = kvm_dirty_bitmap_bytes(memslot);
memset(memslot->dirty_bitmap, 0, n);
}
r = 0;

View File

@ -212,5 +212,10 @@ struct mcf_platform_uart {
#define MCFUART_URF_RXS 0xc0 /* Receiver status */
#endif
#if defined(CONFIG_M5272)
#define MCFUART_TXFIFOSIZE 25
#else
#define MCFUART_TXFIFOSIZE 1
#endif
/****************************************************************************/
#endif /* mcfuart_h */

View File

@ -94,7 +94,7 @@ cflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
cflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
cflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5271,-m5200)
cflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
cflags-$(CONFIG_M528x) := $(call cc-option,-m528x,-m5307)
cflags-$(CONFIG_M5307) := $(call cc-option,-m5307,-m5200)

View File

@ -145,6 +145,6 @@ ENTRY(ret_from_user_signal)
trap #0
ENTRY(ret_from_user_rt_signal)
move #__NR_rt_sigreturn,%d0
movel #__NR_rt_sigreturn,%d0
trap #0

View File

@ -107,7 +107,6 @@ void init_IRQ(void)
_ramvec[vba+CPMVEC_PIO_PC7] = inthandler; /* pio - pc7 */
_ramvec[vba+CPMVEC_PIO_PC6] = inthandler; /* pio - pc6 */
_ramvec[vba+CPMVEC_TIMER3] = inthandler; /* timer 3 */
_ramvec[vba+CPMVEC_RISCTIMER] = inthandler; /* reserved */
_ramvec[vba+CPMVEC_PIO_PC5] = inthandler; /* pio - pc5 */
_ramvec[vba+CPMVEC_PIO_PC4] = inthandler; /* pio - pc4 */
_ramvec[vba+CPMVEC_RESERVED2] = inthandler; /* reserved */

View File

@ -49,7 +49,7 @@ config AR7
family: TNETD7100, 7200 and 7300.
config BCM47XX
bool "BCM47XX based boards"
bool "Broadcom BCM47XX based boards"
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
@ -509,6 +509,7 @@ config SIBYTE_SWARM
bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
select HAVE_PATA_PLATFORM
select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
@ -523,6 +524,7 @@ config SIBYTE_LITTLESUR
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
select HAVE_PATA_PLATFORM
select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
@ -1305,6 +1307,33 @@ config CPU_CAVIUM_OCTEON
endchoice
if CPU_LOONGSON2F
config CPU_NOP_WORKAROUNDS
bool
config CPU_JUMP_WORKAROUNDS
bool
config CPU_LOONGSON2F_WORKAROUNDS
bool "Loongson 2F Workarounds"
default y
select CPU_NOP_WORKAROUNDS
select CPU_JUMP_WORKAROUNDS
help
Loongson 2F01 / 2F02 processors have the NOP & JUMP issues which
require workarounds. Without workarounds the system may hang
unexpectedly. For more information please refer to the gas
-mfix-loongson2f-nop and -mfix-loongson2f-jump options.
Loongson 2F03 and later have fixed these issues and no workarounds
are needed. The workarounds have no significant side effect on them
but may decrease the performance of the system so this option should
be disabled unless the kernel is intended to be run on 2F01 or 2F02
systems.
If unsure, please say Y.
endif # CPU_LOONGSON2F
config SYS_SUPPORTS_ZBOOT
bool
select HAVE_KERNEL_GZIP

View File

@ -136,6 +136,19 @@ cflags-$(CONFIG_CPU_LOONGSON2E) += \
$(call cc-option,-march=loongson2e,-march=r4600)
cflags-$(CONFIG_CPU_LOONGSON2F) += \
$(call cc-option,-march=loongson2f,-march=r4600)
# enable the workarounds for loongson2f
ifdef CONFIG_CPU_LOONGSON2F_WORKAROUNDS
ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-nop,),)
$(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-nop)
else
cflags-$(CONFIG_CPU_NOP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-nop
endif
ifeq ($(call as-option,-Wa$(comma)-mfix-loongson2f-jump,),)
$(error only binutils >= 2.20.2 have needed option -mfix-loongson2f-jump)
else
cflags-$(CONFIG_CPU_JUMP_WORKAROUNDS) += -Wa$(comma)-mfix-loongson2f-jump
endif
endif
cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32 -Wa,--trap

View File

@ -66,12 +66,16 @@ static int __init db1200_arch_init(void)
set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW);
bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT);
/* do not autoenable these: CPLD has broken edge int handling,
* and the CD handler setup requires manual enabling to work
* around that.
/* insert/eject pairs: one of both is always screaming. To avoid
* issues they must not be automatically enabled when initially
* requested.
*/
irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_PC0_INSERT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_PC0_EJECT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_PC1_INSERT_INT)->status |= IRQ_NOAUTOEN;
irq_to_desc(DB1200_PC1_EJECT_INT)->status |= IRQ_NOAUTOEN;
return 0;
}

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc6
# Sun May 31 20:17:18 2009
# Linux kernel version: 2.6.34-rc2
# Tue Mar 23 10:36:32 2010
#
CONFIG_MIPS=y
@ -9,13 +9,14 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set
# CONFIG_BCM47XX is not set
CONFIG_BCM63XX=y
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_LASAT is not set
# CONFIG_LEMOTE_FULONG is not set
# CONFIG_MACH_LOONGSON is not set
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_NEC_MARKEINS is not set
@ -26,6 +27,7 @@ CONFIG_BCM63XX=y
# CONFIG_PNX8550_STB810 is not set
# CONFIG_PMC_MSP is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_POWERTV is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP28 is not set
@ -45,13 +47,17 @@ CONFIG_BCM63XX=y
# CONFIG_WR_PPMC is not set
# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
#
# CPU support
#
CONFIG_BCM63XX_CPU_6338=y
CONFIG_BCM63XX_CPU_6345=y
CONFIG_BCM63XX_CPU_6348=y
CONFIG_BCM63XX_CPU_6358=y
CONFIG_BOARD_BCM963XX=y
CONFIG_LOONGSON_UART_BASE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
@ -69,10 +75,8 @@ CONFIG_CEVT_R4K=y
CONFIG_CSRC_R4K_LIB=y
CONFIG_CSRC_R4K=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_EARLY_PRINTK=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_GPIO=y
CONFIG_CPU_BIG_ENDIAN=y
@ -85,7 +89,8 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5
#
# CPU selection
#
# CONFIG_CPU_LOONGSON2 is not set
# CONFIG_CPU_LOONGSON2E is not set
# CONFIG_CPU_LOONGSON2F is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
# CONFIG_CPU_MIPS64_R1 is not set
@ -128,7 +133,7 @@ CONFIG_CPU_HAS_PREFETCH=y
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
CONFIG_CPU_HAS_LLSC=y
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_CPU_HAS_SYNC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
@ -146,9 +151,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
# CONFIG_HIGH_RES_TIMERS is not set
@ -170,6 +174,7 @@ CONFIG_PREEMPT_NONE=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
@ -189,15 +194,12 @@ CONFIG_LOCALVERSION=""
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_PREEMPT_RCU is not set
CONFIG_TINY_RCU=y
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@ -205,11 +207,11 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@ -223,6 +225,10 @@ CONFIG_BASE_FULL=y
# CONFIG_EVENTFD is not set
# CONFIG_SHMEM is not set
# CONFIG_AIO is not set
#
# Kernel Performance Events And Counters
#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
@ -231,14 +237,17 @@ CONFIG_COMPAT_BRK=y
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
#
# GCOV-based kernel profiling
#
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@ -246,14 +255,41 @@ CONFIG_BLOCK=y
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
CONFIG_INLINE_SPIN_UNLOCK=y
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
CONFIG_INLINE_READ_UNLOCK=y
# CONFIG_INLINE_READ_UNLOCK_BH is not set
CONFIG_INLINE_READ_UNLOCK_IRQ=y
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
CONFIG_INLINE_WRITE_UNLOCK=y
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
@ -263,15 +299,12 @@ CONFIG_HW_HAS_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
CONFIG_MMU=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@ -295,6 +328,7 @@ CONFIG_TRAD_SIGNALS=y
#
# Power management options
#
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PM is not set
CONFIG_NET=y
@ -333,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
@ -347,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@ -359,7 +395,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
CONFIG_MAC80211=y
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@ -471,6 +527,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@ -484,13 +541,16 @@ CONFIG_HAVE_IDE=y
#
#
# Enable only one of the two stacks, unless you know what you are doing
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@ -529,6 +589,7 @@ CONFIG_MII=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ETHOC is not set
# CONFIG_SMSC911X is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
@ -541,17 +602,48 @@ CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_BCM63XX_ENET=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
CONFIG_B43=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_PIO=y
# CONFIG_B43_PHY_LP is not set
CONFIG_B43_LEDS=y
# CONFIG_B43_DEBUG is not set
# CONFIG_B43LEGACY is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_WL12XX is not set
# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@ -574,6 +666,7 @@ CONFIG_BCM63XX_ENET=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
@ -607,6 +700,7 @@ CONFIG_BCM63XX_ENET=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
CONFIG_SERIAL_BCM63XX=y
CONFIG_SERIAL_BCM63XX_CONSOLE=y
# CONFIG_UNIX98_PTYS is not set
@ -629,6 +723,11 @@ CONFIG_LEGACY_PTY_COUNT=256
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_GPIO_SYSFS is not set
@ -636,6 +735,8 @@ CONFIG_GPIOLIB=y
#
# Memory mapped GPIO expanders:
#
# CONFIG_GPIO_IT8761E is not set
# CONFIG_GPIO_SCH is not set
#
# I2C GPIO expanders:
@ -644,16 +745,21 @@ CONFIG_GPIOLIB=y
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
# CONFIG_GPIO_BT8XX is not set
# CONFIG_GPIO_LANGWELL is not set
#
# SPI GPIO expanders:
#
#
# AC97 GPIO expanders:
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
@ -662,15 +768,16 @@ CONFIG_SSB_POSSIBLE=y
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_SSB_DRIVER_PCICORE is not set
CONFIG_SSB_DRIVER_PCICORE=y
# CONFIG_SSB_DRIVER_MIPS is not set
#
@ -680,27 +787,15 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGA_ARB is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
@ -710,11 +805,7 @@ CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y
#
# Display hardware drivers
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
@ -741,13 +832,14 @@ CONFIG_USB=y
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_SSB is not set
CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
@ -796,7 +888,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@ -807,8 +898,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@ -819,7 +910,29 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
# CONFIG_LEDS_LT3593 is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
CONFIG_LEDS_TRIGGER_TIMER=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_RTC_LIB=y
@ -827,6 +940,10 @@ CONFIG_RTC_LIB=y
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not set
#
@ -838,12 +955,16 @@ CONFIG_RTC_LIB=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_FILE_LOCKING is not set
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
@ -875,8 +996,6 @@ CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
@ -888,6 +1007,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@ -898,7 +1018,6 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
@ -906,7 +1025,46 @@ CONFIG_MISC_FILESYSTEMS=y
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
@ -918,29 +1076,23 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_EARLY_PRINTK=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_CMDLINE_OVERRIDE is not set
@ -951,8 +1103,108 @@ CONFIG_CMDLINE="console=ttyS0,115200"
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_BINARY_PRINTF is not set
#

View File

@ -16,7 +16,7 @@
({ \
__typeof(*(m)) __ret; \
\
if (kernel_uses_llsc && R10000_LLSC_WAR) { \
if (kernel_uses_llsc && R10000_LLSC_WAR) { \
__asm__ __volatile__( \
" .set push \n" \
" .set noat \n" \

View File

@ -307,7 +307,7 @@ extern unsigned long _loongson_addrwincfg_base;
*/
#define LOONGSON_ADDRWIN_CFG(s, d, w, src, dst, size) do {\
s##_WIN##w##_BASE = (src); \
s##_WIN##w##_MMAP = (src) | ADDRWIN_MAP_DST_##d; \
s##_WIN##w##_MMAP = (dst) | ADDRWIN_MAP_DST_##d; \
s##_WIN##w##_MASK = ~(size-1); \
} while (0)

View File

@ -120,9 +120,14 @@
#endif
#define FIRST_USER_ADDRESS 0UL
#define VMALLOC_START MAP_BASE
/*
* TLB refill handlers also map the vmalloc area into xuseg. Avoid
* the first couple of pages so NULL pointer dereferences will still
* reliably trap.
*/
#define VMALLOC_START (MAP_BASE + (2 * PAGE_SIZE))
#define VMALLOC_END \
(VMALLOC_START + \
(MAP_BASE + \
min(PTRS_PER_PGD * PTRS_PER_PMD * PTRS_PER_PTE * PAGE_SIZE, \
(1UL << cpu_vmbits)) - (1UL << 32))

View File

@ -142,9 +142,9 @@ extern int ptrace_set_watch_regs(struct task_struct *child,
extern asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit);
extern NORET_TYPE void die(const char *, const struct pt_regs *) ATTRIB_NORET;
extern NORET_TYPE void die(const char *, struct pt_regs *) ATTRIB_NORET;
static inline void die_if_kernel(const char *str, const struct pt_regs *regs)
static inline void die_if_kernel(const char *str, struct pt_regs *regs)
{
if (unlikely(!user_mode(regs)))
die(str, regs);

View File

@ -121,7 +121,7 @@
.endm
#else
.macro get_saved_sp /* Uniprocessor variation */
#ifdef CONFIG_CPU_LOONGSON2F
#ifdef CONFIG_CPU_JUMP_WORKAROUNDS
/*
* Clear BTB (branch target buffer), forbid RAS (return address
* stack) to workaround the Out-of-order Issue in Loongson2F

View File

@ -167,6 +167,24 @@ static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \
#define uasm_i_ssnop(buf) uasm_i_sll(buf, 0, 0, 1)
#define uasm_i_ehb(buf) uasm_i_sll(buf, 0, 0, 3)
static inline void uasm_i_dsrl_safe(u32 **p, unsigned int a1,
unsigned int a2, unsigned int a3)
{
if (a3 < 32)
uasm_i_dsrl(p, a1, a2, a3);
else
uasm_i_dsrl32(p, a1, a2, a3 - 32);
}
static inline void uasm_i_dsll_safe(u32 **p, unsigned int a1,
unsigned int a2, unsigned int a3)
{
if (a3 < 32)
uasm_i_dsll(p, a1, a2, a3);
else
uasm_i_dsll32(p, a1, a2, a3 - 32);
}
/* Handle relocations. */
struct uasm_reloc {
u32 *addr;

View File

@ -76,15 +76,9 @@ void __init plat_mem_setup(void)
#ifdef CONFIG_VT
screen_info = (struct screen_info) {
0, 0, /* orig-x, orig-y */
0, /* unused */
0, /* orig_video_page */
0, /* orig_video_mode */
160, /* orig_video_cols */
0, 0, 0, /* unused, ega_bx, unused */
64, /* orig_video_lines */
0, /* orig_video_isVGA */
16 /* orig_video_points */
.orig_video_cols = 160,
.orig_video_lines = 64,
.orig_video_points = 16,
};
#endif

View File

@ -352,9 +352,10 @@ void show_registers(const struct pt_regs *regs)
static DEFINE_SPINLOCK(die_lock);
void __noreturn die(const char * str, const struct pt_regs * regs)
void __noreturn die(const char * str, struct pt_regs * regs)
{
static int die_counter;
int sig = SIGSEGV;
#ifdef CONFIG_MIPS_MT_SMTC
unsigned long dvpret = dvpe();
#endif /* CONFIG_MIPS_MT_SMTC */
@ -365,6 +366,10 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
#ifdef CONFIG_MIPS_MT_SMTC
mips_mt_regdump(dvpret);
#endif /* CONFIG_MIPS_MT_SMTC */
if (notify_die(DIE_OOPS, str, regs, 0, current->thread.trap_no, SIGSEGV) == NOTIFY_STOP)
sig = 0;
printk("%s[#%d]:\n", str, ++die_counter);
show_registers(regs);
add_taint(TAINT_DIE);
@ -379,7 +384,7 @@ void __noreturn die(const char * str, const struct pt_regs * regs)
panic("Fatal exception");
}
do_exit(SIGSEGV);
do_exit(sig);
}
extern struct exception_table_entry __start___dbe_table[];
@ -1557,12 +1562,7 @@ static char panic_null_cerr[] __cpuinitdata =
void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
unsigned long size)
{
#ifdef CONFIG_32BIT
unsigned long uncached_ebase = KSEG1ADDR(ebase);
#endif
#ifdef CONFIG_64BIT
unsigned long uncached_ebase = TO_UNCAC(ebase);
#endif
unsigned long uncached_ebase = CKSEG1ADDR(ebase);
if (!addr)
panic(panic_null_cerr);

View File

@ -24,7 +24,7 @@ static const char *system_types[] = {
[MACH_LEMOTE_FL2F] "lemote-fuloong-2f-box",
[MACH_LEMOTE_ML2F7] "lemote-mengloong-2f-7inches",
[MACH_LEMOTE_YL2F89] "lemote-yeeloong-2f-8.9inches",
[MACH_DEXXON_GDIUM2F10] "dexxon-gidum-2f-10inches",
[MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f",
[MACH_LEMOTE_NAS] "lemote-nas-2f",
[MACH_LEMOTE_LL2F] "lemote-lynloong-2f",
[MACH_LOONGSON_END] NULL,

View File

@ -75,7 +75,7 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
unsigned long end = offset + size;
if (__uncached_access(file, offset)) {
if (((uca_start && offset) >= uca_start) &&
if (uca_start && (offset >= uca_start) &&
(end <= uca_end))
return __pgprot((pgprot_val(vma_prot) &
~_CACHE_MASK) |
@ -96,7 +96,7 @@ static int __init find_vga_mem_init(void)
return 0;
for_each_pci_dev(dev) {
if ((dev->class >> 8) == PCI_CLASS_DISPLAY_VGA) {
if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
for (idx = 0; idx < PCI_NUM_RESOURCES; idx++) {
r = &dev->resource[idx];
if (!r->start && r->end)

View File

@ -16,13 +16,31 @@
#include <loongson.h>
static inline void loongson_reboot(void)
{
#ifndef CONFIG_CPU_JUMP_WORKAROUNDS
((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
#else
void (*func)(void);
func = (void *)ioremap_nocache(LOONGSON_BOOT_BASE, 4);
__asm__ __volatile__(
" .set noat \n"
" jr %[func] \n"
" .set at \n"
: /* No outputs */
: [func] "r" (func));
#endif
}
static void loongson_restart(char *command)
{
/* do preparation for reboot */
mach_prepare_reboot();
/* reboot via jumping to boot base address */
((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) ();
loongson_reboot();
}
static void loongson_poweroff(void)

View File

@ -41,15 +41,12 @@ void __init plat_mem_setup(void)
conswitchp = &vga_con;
screen_info = (struct screen_info) {
0, 25, /* orig-x, orig-y */
0, /* unused */
0, /* orig-video-page */
0, /* orig-video-mode */
80, /* orig-video-cols */
0, 0, 0, /* ega_ax, ega_bx, ega_cx */
25, /* orig-video-lines */
VIDEO_TYPE_VGAC, /* orig-video-isVGA */
16 /* orig-video-points */
.orig_x = 0,
.orig_y = 25,
.orig_video_cols = 80,
.orig_video_lines = 25,
.orig_video_isVGA = VIDEO_TYPE_VGAC,
.orig_video_points = 16,
};
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;

View File

@ -79,7 +79,7 @@ void mach_irq_dispatch(unsigned int pending)
if (pending & CAUSEF_IP7)
do_IRQ(LOONGSON_TIMER_IRQ);
else if (pending & CAUSEF_IP6) { /* North Bridge, Perf counter */
#ifdef CONFIG_OPROFILE
#if defined(CONFIG_OPROFILE) || defined(CONFIG_OPROFILE_MODULE)
do_IRQ(LOONGSON2_PERFCNT_IRQ);
#endif
bonito_irqdispatch();

View File

@ -31,6 +31,16 @@
#include <asm/war.h>
#include <asm/uasm.h>
/*
* TLB load/store/modify handlers.
*
* Only the fastpath gets synthesized at runtime, the slowpath for
* do_page_fault remains normal asm.
*/
extern void tlb_do_page_fault_0(void);
extern void tlb_do_page_fault_1(void);
static inline int r45k_bvahwbug(void)
{
/* XXX: We should probe for the presence of this bug, but we don't. */
@ -83,6 +93,7 @@ enum label_id {
label_nopage_tlbm,
label_smp_pgtable_change,
label_r3000_write_probe_fail,
label_large_segbits_fault,
#ifdef CONFIG_HUGETLB_PAGE
label_tlb_huge_update,
#endif
@ -101,6 +112,7 @@ UASM_L_LA(_nopage_tlbs)
UASM_L_LA(_nopage_tlbm)
UASM_L_LA(_smp_pgtable_change)
UASM_L_LA(_r3000_write_probe_fail)
UASM_L_LA(_large_segbits_fault)
#ifdef CONFIG_HUGETLB_PAGE
UASM_L_LA(_tlb_huge_update)
#endif
@ -157,6 +169,10 @@ static u32 tlb_handler[128] __cpuinitdata;
static struct uasm_label labels[128] __cpuinitdata;
static struct uasm_reloc relocs[128] __cpuinitdata;
#ifdef CONFIG_64BIT
static int check_for_high_segbits __cpuinitdata;
#endif
#ifndef CONFIG_MIPS_PGD_C0_CONTEXT
/*
* CONFIG_MIPS_PGD_C0_CONTEXT implies 64 bit and lack of pgd_current,
@ -408,7 +424,7 @@ static __cpuinit __maybe_unused void build_convert_pte_to_entrylo(u32 **p,
UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
} else {
#ifdef CONFIG_64BIT_PHYS_ADDR
uasm_i_dsrl(p, reg, reg, ilog2(_PAGE_GLOBAL));
uasm_i_dsrl_safe(p, reg, reg, ilog2(_PAGE_GLOBAL));
#else
UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL));
#endif
@ -532,7 +548,24 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
* The vmalloc handling is not in the hotpath.
*/
uasm_i_dmfc0(p, tmp, C0_BADVADDR);
uasm_il_bltz(p, r, tmp, label_vmalloc);
if (check_for_high_segbits) {
/*
* The kernel currently implicitely assumes that the
* MIPS SEGBITS parameter for the processor is
* (PGDIR_SHIFT+PGDIR_BITS) or less, and will never
* allocate virtual addresses outside the maximum
* range for SEGBITS = (PGDIR_SHIFT+PGDIR_BITS). But
* that doesn't prevent user code from accessing the
* higher xuseg addresses. Here, we make sure that
* everything but the lower xuseg addresses goes down
* the module_alloc/vmalloc path.
*/
uasm_i_dsrl_safe(p, ptr, tmp, PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
uasm_il_bnez(p, r, ptr, label_vmalloc);
} else {
uasm_il_bltz(p, r, tmp, label_vmalloc);
}
/* No uasm_i_nop needed here, since the next insn doesn't touch TMP. */
#ifdef CONFIG_MIPS_PGD_C0_CONTEXT
@ -549,14 +582,14 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
* SMTC uses TCBind value as "CPU" index
*/
uasm_i_mfc0(p, ptr, C0_TCBIND);
uasm_i_dsrl(p, ptr, ptr, 19);
uasm_i_dsrl_safe(p, ptr, ptr, 19);
# else
/*
* 64 bit SMP running in XKPHYS has smp_processor_id() << 3
* stored in CONTEXT.
*/
uasm_i_dmfc0(p, ptr, C0_CONTEXT);
uasm_i_dsrl(p, ptr, ptr, 23);
uasm_i_dsrl_safe(p, ptr, ptr, 23);
# endif
UASM_i_LA_mostly(p, tmp, pgdc);
uasm_i_daddu(p, ptr, ptr, tmp);
@ -569,44 +602,78 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
uasm_l_vmalloc_done(l, *p);
if (PGDIR_SHIFT - 3 < 32) /* get pgd offset in bytes */
uasm_i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3);
else
uasm_i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32);
/* get pgd offset in bytes */
uasm_i_dsrl_safe(p, tmp, tmp, PGDIR_SHIFT - 3);
uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3);
uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */
#ifndef __PAGETABLE_PMD_FOLDED
uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */
uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */
uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
uasm_i_dsrl_safe(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */
uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3);
uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */
#endif
}
enum vmalloc64_mode {not_refill, refill};
/*
* BVADDR is the faulting address, PTR is scratch.
* PTR will hold the pgd for vmalloc.
*/
static void __cpuinit
build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
unsigned int bvaddr, unsigned int ptr)
unsigned int bvaddr, unsigned int ptr,
enum vmalloc64_mode mode)
{
long swpd = (long)swapper_pg_dir;
int single_insn_swpd;
int did_vmalloc_branch = 0;
single_insn_swpd = uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd);
uasm_l_vmalloc(l, *p);
if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
uasm_il_b(p, r, label_vmalloc_done);
uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
} else {
UASM_i_LA_mostly(p, ptr, swpd);
uasm_il_b(p, r, label_vmalloc_done);
if (uasm_in_compat_space_p(swpd))
uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
else
uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
if (mode == refill && check_for_high_segbits) {
if (single_insn_swpd) {
uasm_il_bltz(p, r, bvaddr, label_vmalloc_done);
uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
did_vmalloc_branch = 1;
/* fall through */
} else {
uasm_il_bgez(p, r, bvaddr, label_large_segbits_fault);
}
}
if (!did_vmalloc_branch) {
if (uasm_in_compat_space_p(swpd) && !uasm_rel_lo(swpd)) {
uasm_il_b(p, r, label_vmalloc_done);
uasm_i_lui(p, ptr, uasm_rel_hi(swpd));
} else {
UASM_i_LA_mostly(p, ptr, swpd);
uasm_il_b(p, r, label_vmalloc_done);
if (uasm_in_compat_space_p(swpd))
uasm_i_addiu(p, ptr, ptr, uasm_rel_lo(swpd));
else
uasm_i_daddiu(p, ptr, ptr, uasm_rel_lo(swpd));
}
}
if (mode == refill && check_for_high_segbits) {
uasm_l_large_segbits_fault(l, *p);
/*
* We get here if we are an xsseg address, or if we are
* an xuseg address above (PGDIR_SHIFT+PGDIR_BITS) boundary.
*
* Ignoring xsseg (assume disabled so would generate
* (address errors?), the only remaining possibility
* is the upper xuseg addresses. On processors with
* TLB_SEGBITS <= PGDIR_SHIFT+PGDIR_BITS, these
* addresses would have taken an address error. We try
* to mimic that here by taking a load/istream page
* fault.
*/
UASM_i_LA(p, ptr, (unsigned long)tlb_do_page_fault_0);
uasm_i_jr(p, ptr);
uasm_i_nop(p);
}
}
@ -720,9 +787,9 @@ static void __cpuinit build_update_entries(u32 **p, unsigned int tmp,
UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC));
} else {
uasm_i_dsrl(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
uasm_i_dsrl_safe(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */
UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */
uasm_i_dsrl(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
uasm_i_dsrl_safe(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */
}
UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */
} else {
@ -793,9 +860,9 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
uasm_i_dmfc0(&p, K0, C0_BADVADDR);
uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
uasm_i_xor(&p, K0, K0, K1);
uasm_i_dsrl32(&p, K1, K0, 62 - 32);
uasm_i_dsrl(&p, K0, K0, 12 + 1);
uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
uasm_i_dsrl_safe(&p, K1, K0, 62);
uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
uasm_i_or(&p, K0, K0, K1);
uasm_il_bnez(&p, &r, K0, label_leave);
/* No need for uasm_i_nop */
@ -825,7 +892,7 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
#endif
#ifdef CONFIG_64BIT
build_get_pgd_vmalloc64(&p, &l, &r, K0, K1);
build_get_pgd_vmalloc64(&p, &l, &r, K0, K1, refill);
#endif
/*
@ -934,15 +1001,6 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
dump_handler((u32 *)ebase, 64);
}
/*
* TLB load/store/modify handlers.
*
* Only the fastpath gets synthesized at runtime, the slowpath for
* do_page_fault remains normal asm.
*/
extern void tlb_do_page_fault_0(void);
extern void tlb_do_page_fault_1(void);
/*
* 128 instructions for the fastpath handler is generous and should
* never be exceeded.
@ -1302,7 +1360,7 @@ build_r4000_tlbchange_handler_tail(u32 **p, struct uasm_label **l,
uasm_i_eret(p); /* return from trap */
#ifdef CONFIG_64BIT
build_get_pgd_vmalloc64(p, l, r, tmp, ptr);
build_get_pgd_vmalloc64(p, l, r, tmp, ptr, not_refill);
#endif
}
@ -1322,9 +1380,9 @@ static void __cpuinit build_r4000_tlb_load_handler(void)
uasm_i_dmfc0(&p, K0, C0_BADVADDR);
uasm_i_dmfc0(&p, K1, C0_ENTRYHI);
uasm_i_xor(&p, K0, K0, K1);
uasm_i_dsrl32(&p, K1, K0, 62 - 32);
uasm_i_dsrl(&p, K0, K0, 12 + 1);
uasm_i_dsll32(&p, K0, K0, 64 + 12 + 1 - segbits - 32);
uasm_i_dsrl_safe(&p, K1, K0, 62);
uasm_i_dsrl_safe(&p, K0, K0, 12 + 1);
uasm_i_dsll_safe(&p, K0, K0, 64 + 12 + 1 - segbits);
uasm_i_or(&p, K0, K0, K1);
uasm_il_bnez(&p, &r, K0, label_leave);
/* No need for uasm_i_nop */
@ -1526,6 +1584,10 @@ void __cpuinit build_tlb_refill_handler(void)
*/
static int run_once = 0;
#ifdef CONFIG_64BIT
check_for_high_segbits = current_cpu_data.vmbits > (PGDIR_SHIFT + PGD_ORDER + PAGE_SHIFT - 3);
#endif
switch (current_cpu_type()) {
case CPU_R2000:
case CPU_R3000:

View File

@ -20,6 +20,8 @@
* Reset the PNX8550 board.
*
*/
#include <linux/kernel.h>
#include <asm/reboot.h>
#include <glb.h>

View File

@ -37,6 +37,7 @@
#include <linux/mm.h>
#include <linux/console.h>
#include <linux/tty.h>
#include <linux/vt.h>
#include <asm/io.h>
@ -254,7 +255,7 @@ static int __init sb1250_pcibios_init(void)
* XXX ehs: Should this happen in PCI Device mode?
*/
io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024);
sb1250_controller.io_map_base = io_map_base;
sb1250_controller.io_map_base = (unsigned long)io_map_base;
set_io_port_base((unsigned long)io_map_base);
#ifdef CONFIG_SIBYTE_HAS_LDT

View File

@ -89,7 +89,7 @@ static void print_buserr(void)
void ip22_be_interrupt(int irq)
{
const int field = 2 * sizeof(unsigned long);
const struct pt_regs *regs = get_irq_regs();
struct pt_regs *regs = get_irq_regs();
save_and_clear_buserr();
print_buserr();

View File

@ -453,7 +453,7 @@ mips_be_fatal:
void ip22_be_interrupt(int irq)
{
const struct pt_regs *regs = get_irq_regs();
struct pt_regs *regs = get_irq_regs();
count_be_interrupt++;

View File

@ -145,15 +145,14 @@ void __init plat_mem_setup(void)
#ifdef CONFIG_VT
screen_info = (struct screen_info) {
0, 0, /* orig-x, orig-y */
0, /* unused */
52, /* orig_video_page */
3, /* orig_video_mode */
80, /* orig_video_cols */
4626, 3, 9, /* unused, ega_bx, unused */
25, /* orig_video_lines */
0x22, /* orig_video_isVGA */
16 /* orig_video_points */
.orig_video_page = 52,
.orig_video_mode = 3,
.orig_video_cols = 80,
.flags = 12,
.orig_video_ega_bx = 3,
.orig_video_lines = 25,
.orig_video_isVGA = 0x22,
.orig_video_points = 16,
};
/* XXXKW for CFE, get lines/cols from environment */
#endif

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc3
# Wed Jan 6 09:24:14 2010
# Linux kernel version: 2.6.34-rc5
# Mon Apr 19 23:16:38 2010
#
# CONFIG_PPC64 is not set
@ -97,14 +97,8 @@ CONFIG_RCU_FANOUT=32
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@ -112,6 +106,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@ -124,7 +119,7 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@ -325,6 +320,7 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@ -336,7 +332,6 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
@ -362,7 +357,6 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
@ -543,6 +537,8 @@ CONFIG_MTD_PHYSMAP_OF=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@ -579,6 +575,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_C2PORT is not set
@ -596,6 +593,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@ -788,6 +786,7 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@ -836,6 +835,7 @@ CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@ -849,15 +849,9 @@ CONFIG_I2C_MPC=y
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@ -883,10 +877,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@ -923,6 +918,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@ -971,18 +967,21 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@ -991,6 +990,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@ -1083,7 +1083,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@ -1096,7 +1095,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
@ -1259,6 +1257,7 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@ -1285,6 +1284,7 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc3
# Wed Jan 6 09:24:14 2010
# Linux kernel version: 2.6.34-rc5
# Mon Apr 19 23:16:39 2010
#
# CONFIG_PPC64 is not set
@ -98,7 +98,6 @@ CONFIG_RCU_FANOUT=32
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
@ -318,6 +317,7 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_FSL_SOC=y
CONFIG_PPC_PCI_CHOICE=y
@ -346,7 +346,6 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@ -387,6 +386,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
@ -539,6 +539,8 @@ CONFIG_MTD_UBI_DEBUG=y
# CONFIG_MTD_UBI_DEBUG_MSG_EBA is not set
# CONFIG_MTD_UBI_DEBUG_MSG_WL is not set
# CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_MDIO=y
@ -563,6 +565,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
@ -690,6 +693,7 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_QE is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@ -720,6 +724,7 @@ CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@ -732,15 +737,9 @@ CONFIG_I2C_MPC=y
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
@ -765,18 +764,20 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@ -805,8 +806,6 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_UIO=y
# CONFIG_UIO_PDRV is not set
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_SMX is not set
# CONFIG_UIO_SERCOS3 is not set
#
# TI VLYNQ
@ -887,6 +886,7 @@ CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_UBIFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@ -911,6 +911,7 @@ CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@ -976,6 +977,7 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LKDTM is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc3
# Wed Jan 6 09:24:15 2010
# Linux kernel version: 2.6.34-rc5
# Mon Apr 19 23:16:40 2010
#
# CONFIG_PPC64 is not set
@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@ -123,7 +118,7 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@ -324,6 +319,7 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@ -335,7 +331,6 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@ -362,7 +357,6 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@ -556,6 +550,8 @@ CONFIG_MTD_NAND_FSL_ELBC=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
@ -593,6 +589,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
@ -612,6 +609,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@ -772,6 +770,7 @@ CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@ -824,6 +823,8 @@ CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
CONFIG_CHELSIO_T4_DEPENDS=y
# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@ -836,6 +837,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@ -931,6 +933,7 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@ -980,6 +983,7 @@ CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@ -993,15 +997,9 @@ CONFIG_I2C_MPC=y
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@ -1044,10 +1042,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@ -1086,6 +1085,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@ -1134,21 +1134,24 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@ -1157,6 +1160,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@ -1289,7 +1293,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@ -1302,7 +1305,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@ -1341,6 +1343,7 @@ CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
@ -1511,6 +1514,7 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@ -1537,6 +1541,7 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set

View File

@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc3
# Wed Jan 6 09:24:16 2010
# Linux kernel version: 2.6.34-rc5
# Mon Apr 19 23:16:40 2010
#
# CONFIG_PPC64 is not set
@ -96,14 +96,8 @@ CONFIG_RCU_FANOUT=32
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_FAIR_GROUP_SCHED is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
@ -111,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
# CONFIG_RD_LZO is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@ -123,7 +118,7 @@ CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
# CONFIG_EPOLL is not set
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
@ -324,6 +319,7 @@ CONFIG_ISA_DMA_API=y
# Bus options
#
CONFIG_ZONE_DMA=y
# CONFIG_NEED_DMA_MAP_STATE is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
@ -335,7 +331,6 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
@ -362,7 +357,6 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
@ -556,6 +550,8 @@ CONFIG_MTD_NAND_IDS=y
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_FLATTREE=y
CONFIG_OF_DYNAMIC=y
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
CONFIG_OF_SPI=y
@ -593,6 +589,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
@ -612,6 +609,7 @@ CONFIG_HAVE_IDE=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
@ -735,6 +733,7 @@ CONFIG_ATA_SFF=y
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
@ -837,6 +836,7 @@ CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_E100=y
@ -889,6 +889,8 @@ CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
CONFIG_CHELSIO_T4_DEPENDS=y
# CONFIG_CHELSIO_T4 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
@ -901,6 +903,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
@ -996,6 +999,7 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@ -1045,6 +1049,7 @@ CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
@ -1058,15 +1063,9 @@ CONFIG_I2C_MPC=y
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@ -1109,10 +1108,11 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
@ -1151,6 +1151,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
@ -1199,21 +1200,24 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
# CONFIG_LPC_SCH is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
@ -1222,6 +1226,7 @@ CONFIG_SSB_POSSIBLE=y
#
# CONFIG_AGP is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
@ -1354,7 +1359,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
@ -1367,7 +1371,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@ -1406,6 +1409,7 @@ CONFIG_USB_ETH_RNDIS=y
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
# CONFIG_USB_G_NOKIA is not set
# CONFIG_USB_G_MULTI is not set
#
@ -1576,6 +1580,7 @@ CONFIG_JFFS2_ZLIB=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
@ -1602,6 +1607,7 @@ CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set

Some files were not shown because too many files have changed in this diff Show More