forked from Minki/linux
staging: octeon-usb: cvmx-usbcx-defs.h: avoid long lines in comments
Format all comments (except license text) to fit to 80 column terminals. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Aaro Koskinen
Greg Kroah-Hartman
parent
3d3792e91f
commit
1337de71a9
@ -90,13 +90,14 @@
|
||||
*
|
||||
* Core AHB Configuration Register (GAHBCFG)
|
||||
*
|
||||
* This register can be used to configure the core after power-on or a change in mode of operation.
|
||||
* This register mainly contains AHB system-related configuration parameters. The AHB is the processor
|
||||
* interface to the O2P USB core. In general, software need not know about this interface except to
|
||||
* This register can be used to configure the core after power-on or a change in
|
||||
* mode of operation. This register mainly contains AHB system-related
|
||||
* configuration parameters. The AHB is the processor interface to the O2P USB
|
||||
* core. In general, software need not know about this interface except to
|
||||
* program the values as specified.
|
||||
*
|
||||
* The application must program this register as part of the O2P USB core initialization.
|
||||
* Do not change this register after the initial programming.
|
||||
* The application must program this register as part of the O2P USB core
|
||||
* initialization. Do not change this register after the initial programming.
|
||||
*/
|
||||
union cvmx_usbcx_gahbcfg {
|
||||
uint32_t u32;
|
||||
@ -127,9 +128,9 @@ union cvmx_usbcx_gahbcfg {
|
||||
* This field has not effect and should be left as 0x0.
|
||||
* @glblintrmsk: Global Interrupt Mask (GlblIntrMsk)
|
||||
* Software should set this field to 0x1.
|
||||
* The application uses this bit to mask or unmask the interrupt
|
||||
* line assertion to itself. Irrespective of this bit's setting, the
|
||||
* interrupt status registers are updated by the core.
|
||||
* The application uses this bit to mask or unmask the interrupt
|
||||
* line assertion to itself. Irrespective of this bit's setting,
|
||||
* the interrupt status registers are updated by the core.
|
||||
* * 1'b0: Mask the interrupt assertion to the application.
|
||||
* * 1'b1: Unmask the interrupt assertion to the application.
|
||||
*/
|
||||
@ -220,9 +221,10 @@ typedef union cvmx_usbcx_ghwcfg3 cvmx_usbcx_ghwcfg3_t;
|
||||
*
|
||||
* Core Interrupt Mask Register (GINTMSK)
|
||||
*
|
||||
* This register works with the Core Interrupt register to interrupt the application.
|
||||
* When an interrupt bit is masked, the interrupt associated with that bit will not be generated.
|
||||
* However, the Core Interrupt (GINTSTS) register bit corresponding to that interrupt will still be set.
|
||||
* This register works with the Core Interrupt register to interrupt the
|
||||
* application. When an interrupt bit is masked, the interrupt associated with
|
||||
* that bit will not be generated. However, the Core Interrupt (GINTSTS)
|
||||
* register bit corresponding to that interrupt will still be set.
|
||||
* Mask interrupt: 1'b0, Unmask interrupt: 1'b1
|
||||
*/
|
||||
union cvmx_usbcx_gintmsk {
|
||||
@ -242,7 +244,8 @@ union cvmx_usbcx_gintmsk {
|
||||
* @incomplpmsk: Incomplete Periodic Transfer Mask (incomplPMsk)
|
||||
* Incomplete Isochronous OUT Transfer Mask
|
||||
* (incompISOOUTMsk)
|
||||
* @incompisoinmsk: Incomplete Isochronous IN Transfer Mask (incompISOINMsk)
|
||||
* @incompisoinmsk: Incomplete Isochronous IN Transfer Mask
|
||||
* (incompISOINMsk)
|
||||
* @oepintmsk: OUT Endpoints Interrupt Mask (OEPIntMsk)
|
||||
* @inepintmsk: IN Endpoints Interrupt Mask (INEPIntMsk)
|
||||
* @epmismsk: Endpoint Mismatch Interrupt Mask (EPMisMsk)
|
||||
@ -257,7 +260,8 @@ union cvmx_usbcx_gintmsk {
|
||||
* @ulpickintmsk: ULPI Carkit Interrupt Mask (ULPICKINTMsk)
|
||||
* I2C Carkit Interrupt Mask (I2CCKINTMsk)
|
||||
* @goutnakeffmsk: Global OUT NAK Effective Mask (GOUTNakEffMsk)
|
||||
* @ginnakeffmsk: Global Non-Periodic IN NAK Effective Mask (GINNakEffMsk)
|
||||
* @ginnakeffmsk: Global Non-Periodic IN NAK Effective Mask
|
||||
* (GINNakEffMsk)
|
||||
* @nptxfempmsk: Non-Periodic TxFIFO Empty Mask (NPTxFEmpMsk)
|
||||
* @rxflvlmsk: Receive FIFO Non-Empty Mask (RxFLvlMsk)
|
||||
* @sofmsk: Start of (micro)Frame Mask (SofMsk)
|
||||
@ -306,12 +310,15 @@ typedef union cvmx_usbcx_gintmsk cvmx_usbcx_gintmsk_t;
|
||||
*
|
||||
* Core Interrupt Register (GINTSTS)
|
||||
*
|
||||
* This register interrupts the application for system-level events in the current mode of operation
|
||||
* (Device mode or Host mode). It is shown in Interrupt. Some of the bits in this register are valid only in Host mode,
|
||||
* while others are valid in Device mode only. This register also indicates the current mode of operation.
|
||||
* In order to clear the interrupt status bits of type R_SS_WC, the application must write 1'b1 into the bit.
|
||||
* The FIFO status interrupts are read only; once software reads from or writes to the FIFO while servicing these
|
||||
* interrupts, FIFO interrupt conditions are cleared automatically.
|
||||
* This register interrupts the application for system-level events in the
|
||||
* current mode of operation (Device mode or Host mode). It is shown in
|
||||
* Interrupt. Some of the bits in this register are valid only in Host mode,
|
||||
* while others are valid in Device mode only. This register also indicates the
|
||||
* current mode of operation. In order to clear the interrupt status bits of
|
||||
* type R_SS_WC, the application must write 1'b1 into the bit. The FIFO status
|
||||
* interrupts are read only; once software reads from or writes to the FIFO
|
||||
* while servicing these interrupts, FIFO interrupt conditions are cleared
|
||||
* automatically.
|
||||
*/
|
||||
union cvmx_usbcx_gintsts {
|
||||
uint32_t u32;
|
||||
@ -324,7 +331,8 @@ union cvmx_usbcx_gintsts {
|
||||
* For more information on how to use this interrupt, see "Partial
|
||||
* Power-Down and Clock Gating Programming Model" on
|
||||
* page 353.
|
||||
* @sessreqint: Session Request/New Session Detected Interrupt (SessReqInt)
|
||||
* @sessreqint: Session Request/New Session Detected Interrupt
|
||||
* (SessReqInt)
|
||||
* In Host mode, this interrupt is asserted when a session request
|
||||
* is detected from the device. In Device mode, this interrupt is
|
||||
* asserted when the utmiotg_bvalid signal goes high.
|
||||
@ -344,27 +352,27 @@ union cvmx_usbcx_gintsts {
|
||||
* bit in the Core AHB Configuration register
|
||||
* (GAHBCFG.PTxFEmpLvl).
|
||||
* @hchint: Host Channels Interrupt (HChInt)
|
||||
* The core sets this bit to indicate that an interrupt is pending on
|
||||
* one of the channels of the core (in Host mode). The application
|
||||
* must read the Host All Channels Interrupt (HAINT) register to
|
||||
* determine the exact number of the channel on which the
|
||||
* interrupt occurred, and then read the corresponding Host
|
||||
* The core sets this bit to indicate that an interrupt is pending
|
||||
* on one of the channels of the core (in Host mode). The
|
||||
* application must read the Host All Channels Interrupt (HAINT)
|
||||
* register to determine the exact number of the channel on which
|
||||
* the interrupt occurred, and then read the corresponding Host
|
||||
* Channel-n Interrupt (HCINTn) register to determine the exact
|
||||
* cause of the interrupt. The application must clear the
|
||||
* appropriate status bit in the HCINTn register to clear this bit.
|
||||
* @prtint: Host Port Interrupt (PrtInt)
|
||||
* The core sets this bit to indicate a change in port status of one
|
||||
* of the O2P USB core ports in Host mode. The application must
|
||||
* The core sets this bit to indicate a change in port status of
|
||||
* one of the O2P USB core ports in Host mode. The application must
|
||||
* read the Host Port Control and Status (HPRT) register to
|
||||
* determine the exact event that caused this interrupt. The
|
||||
* application must clear the appropriate status bit in the Host Port
|
||||
* Control and Status register to clear this bit.
|
||||
* application must clear the appropriate status bit in the Host
|
||||
* Port Control and Status register to clear this bit.
|
||||
* @fetsusp: Data Fetch Suspended (FetSusp)
|
||||
* This interrupt is valid only in DMA mode. This interrupt indicates
|
||||
* that the core has stopped fetching data for IN endpoints due to
|
||||
* the unavailability of TxFIFO space or Request Queue space.
|
||||
* This interrupt is used by the application for an endpoint
|
||||
* mismatch algorithm.
|
||||
* This interrupt is valid only in DMA mode. This interrupt
|
||||
* indicates that the core has stopped fetching data for IN
|
||||
* endpoints due to the unavailability of TxFIFO space or Request
|
||||
* Queue space. This interrupt is used by the application for an
|
||||
* endpoint mismatch algorithm.
|
||||
* @incomplp: Incomplete Periodic Transfer (incomplP)
|
||||
* In Host mode, the core sets this interrupt bit when there are
|
||||
* incomplete periodic transactions still pending which are
|
||||
@ -376,13 +384,14 @@ union cvmx_usbcx_gintsts {
|
||||
* interrupt is asserted along with the End of Periodic Frame
|
||||
* Interrupt (EOPF) bit in this register.
|
||||
* @incompisoin: Incomplete Isochronous IN Transfer (incompISOIN)
|
||||
* The core sets this interrupt to indicate that there is at least one
|
||||
* isochronous IN endpoint on which the transfer is not completed
|
||||
* in the current microframe. This interrupt is asserted along with
|
||||
* the End of Periodic Frame Interrupt (EOPF) bit in this register.
|
||||
* The core sets this interrupt to indicate that there is at least
|
||||
* one isochronous IN endpoint on which the transfer is not
|
||||
* completed in the current microframe. This interrupt is asserted
|
||||
* along with the End of Periodic Frame Interrupt (EOPF) bit in
|
||||
* this register.
|
||||
* @oepint: OUT Endpoints Interrupt (OEPInt)
|
||||
* The core sets this bit to indicate that an interrupt is pending on
|
||||
* one of the OUT endpoints of the core (in Device mode). The
|
||||
* The core sets this bit to indicate that an interrupt is pending
|
||||
* on one of the OUT endpoints of the core (in Device mode). The
|
||||
* application must read the Device All Endpoints Interrupt
|
||||
* (DAINT) register to determine the exact number of the OUT
|
||||
* endpoint on which the interrupt occurred, and then read the
|
||||
@ -391,8 +400,8 @@ union cvmx_usbcx_gintsts {
|
||||
* application must clear the appropriate status bit in the
|
||||
* corresponding DOEPINTn register to clear this bit.
|
||||
* @iepint: IN Endpoints Interrupt (IEPInt)
|
||||
* The core sets this bit to indicate that an interrupt is pending on
|
||||
* one of the IN endpoints of the core (in Device mode). The
|
||||
* The core sets this bit to indicate that an interrupt is pending
|
||||
* on one of the IN endpoints of the core (in Device mode). The
|
||||
* application must read the Device All Endpoints Interrupt
|
||||
* (DAINT) register to determine the exact number of the IN
|
||||
* endpoint on which the interrupt occurred, and then read the
|
||||
@ -402,13 +411,13 @@ union cvmx_usbcx_gintsts {
|
||||
* corresponding DIEPINTn register to clear this bit.
|
||||
* @epmis: Endpoint Mismatch Interrupt (EPMis)
|
||||
* Indicates that an IN token has been received for a non-periodic
|
||||
* endpoint, but the data for another endpoint is present in the top
|
||||
* of the Non-Periodic Transmit FIFO and the IN endpoint
|
||||
* endpoint, but the data for another endpoint is present in the
|
||||
* top of the Non-Periodic Transmit FIFO and the IN endpoint
|
||||
* mismatch count programmed by the application has expired.
|
||||
* @eopf: End of Periodic Frame Interrupt (EOPF)
|
||||
* Indicates that the period specified in the Periodic Frame Interval
|
||||
* field of the Device Configuration register (DCFG.PerFrInt) has
|
||||
* been reached in the current microframe.
|
||||
* Indicates that the period specified in the Periodic Frame
|
||||
* Interval field of the Device Configuration register
|
||||
* (DCFG.PerFrInt) has been reached in the current microframe.
|
||||
* @isooutdrop: Isochronous OUT Packet Dropped Interrupt (ISOOutDrop)
|
||||
* The core sets this bit when it fails to write an isochronous OUT
|
||||
* packet into the RxFIFO because the RxFIFO doesn't have
|
||||
@ -419,8 +428,8 @@ union cvmx_usbcx_gintsts {
|
||||
* complete. The application must read the Device Status (DSTS)
|
||||
* register to obtain the enumerated speed.
|
||||
* @usbrst: USB Reset (USBRst)
|
||||
* The core sets this bit to indicate that a reset is detected on the
|
||||
* USB.
|
||||
* The core sets this bit to indicate that a reset is detected on
|
||||
* the USB.
|
||||
* @usbsusp: USB Suspend (USBSusp)
|
||||
* The core sets this bit to indicate that a suspend was detected
|
||||
* on the USB. The core enters the Suspended state when there
|
||||
@ -464,17 +473,17 @@ union cvmx_usbcx_gintsts {
|
||||
* (FS), micro-SOF (HS), or Keep-Alive (LS) is transmitted on the
|
||||
* USB. The application must write a 1 to this bit to clear the
|
||||
* interrupt.
|
||||
* In Device mode, in the core sets this bit to indicate that an SOF
|
||||
* token has been received on the USB. The application can read
|
||||
* In Device mode, in the core sets this bit to indicate that an
|
||||
* SOF token has been received on the USB. The application can read
|
||||
* the Device Status register to get the current (micro)frame
|
||||
* number. This interrupt is seen only when the core is operating
|
||||
* at either HS or FS.
|
||||
* @otgint: OTG Interrupt (OTGInt)
|
||||
* The core sets this bit to indicate an OTG protocol event. The
|
||||
* application must read the OTG Interrupt Status (GOTGINT)
|
||||
* register to determine the exact event that caused this interrupt.
|
||||
* The application must clear the appropriate status bit in the
|
||||
* GOTGINT register to clear this bit.
|
||||
* register to determine the exact event that caused this
|
||||
* interrupt. The application must clear the appropriate status bit
|
||||
* in the GOTGINT register to clear this bit.
|
||||
* @modemis: Mode Mismatch Interrupt (ModeMis)
|
||||
* The core sets this bit when the application is trying to access:
|
||||
* * A Host mode register, when the core is operating in Device
|
||||
@ -531,7 +540,8 @@ typedef union cvmx_usbcx_gintsts cvmx_usbcx_gintsts_t;
|
||||
*
|
||||
* Non-Periodic Transmit FIFO Size Register (GNPTXFSIZ)
|
||||
*
|
||||
* The application can program the RAM size and the memory start address for the Non-Periodic TxFIFO.
|
||||
* The application can program the RAM size and the memory start address for the
|
||||
* Non-Periodic TxFIFO.
|
||||
*/
|
||||
union cvmx_usbcx_gnptxfsiz {
|
||||
uint32_t u32;
|
||||
@ -557,8 +567,8 @@ typedef union cvmx_usbcx_gnptxfsiz cvmx_usbcx_gnptxfsiz_t;
|
||||
*
|
||||
* Non-Periodic Transmit FIFO/Queue Status Register (GNPTXSTS)
|
||||
*
|
||||
* This read-only register contains the free space information for the Non-Periodic TxFIFO and
|
||||
* the Non-Periodic Transmit Request Queue
|
||||
* This read-only register contains the free space information for the
|
||||
* Non-Periodic TxFIFO and the Non-Periodic Transmit Request Queue.
|
||||
*/
|
||||
union cvmx_usbcx_gnptxsts {
|
||||
uint32_t u32;
|
||||
@ -610,7 +620,8 @@ typedef union cvmx_usbcx_gnptxsts cvmx_usbcx_gnptxsts_t;
|
||||
*
|
||||
* Core Reset Register (GRSTCTL)
|
||||
*
|
||||
* The application uses this register to reset various hardware features inside the core.
|
||||
* The application uses this register to reset various hardware features inside
|
||||
* the core.
|
||||
*/
|
||||
union cvmx_usbcx_grstctl {
|
||||
uint32_t u32;
|
||||
@ -640,14 +651,14 @@ union cvmx_usbcx_grstctl {
|
||||
* core is neither writing to the TxFIFO nor reading from the
|
||||
* TxFIFO.
|
||||
* The application must wait until the core clears this bit before
|
||||
* performing any operations. This bit takes 8 clocks (of phy_clk or
|
||||
* hclk, whichever is slower) to clear.
|
||||
* performing any operations. This bit takes 8 clocks (of phy_clk
|
||||
* or hclk, whichever is slower) to clear.
|
||||
* @rxfflsh: RxFIFO Flush (RxFFlsh)
|
||||
* The application can flush the entire RxFIFO using this bit, but
|
||||
* must first ensure that the core is not in the middle of a
|
||||
* transaction.
|
||||
* The application must only write to this bit after checking that the
|
||||
* core is neither reading from the RxFIFO nor writing to the
|
||||
* The application must only write to this bit after checking that
|
||||
* the core is neither reading from the RxFIFO nor writing to the
|
||||
* RxFIFO.
|
||||
* The application must wait until the bit is cleared before
|
||||
* performing any other operations. This bit will take 8 clocks
|
||||
@ -661,8 +672,8 @@ union cvmx_usbcx_grstctl {
|
||||
* the subsequent SOF sent out by the core will have a
|
||||
* (micro)frame number of 0.
|
||||
* @hsftrst: HClk Soft Reset (HSftRst)
|
||||
* The application uses this bit to flush the control logic in the AHB
|
||||
* Clock domain. Only AHB Clock Domain pipelines are reset.
|
||||
* The application uses this bit to flush the control logic in the
|
||||
* AHB Clock domain. Only AHB Clock Domain pipelines are reset.
|
||||
* * FIFOs are not flushed with this bit.
|
||||
* * All state machines in the AHB clock domain are reset to the
|
||||
* Idle state after terminating the transactions on the AHB,
|
||||
@ -675,9 +686,9 @@ union cvmx_usbcx_grstctl {
|
||||
* * Because interrupt status bits are not cleared, the application
|
||||
* can get the status of any core events that occurred after it set
|
||||
* this bit.
|
||||
* This is a self-clearing bit that the core clears after all necessary
|
||||
* logic is reset in the core. This may take several clocks,
|
||||
* depending on the core's current state.
|
||||
* This is a self-clearing bit that the core clears after all
|
||||
* necessary logic is reset in the core. This may take several
|
||||
* clocks, depending on the core's current state.
|
||||
* @csftrst: Core Soft Reset (CSftRst)
|
||||
* Resets the hclk and phy_clock domains as follows:
|
||||
* * Clears the interrupts and all the CSR registers except the
|
||||
@ -702,14 +713,14 @@ union cvmx_usbcx_grstctl {
|
||||
* an AHB transfer. Any transactions on the USB are terminated
|
||||
* immediately.
|
||||
* The application can write to this bit any time it wants to reset
|
||||
* the core. This is a self-clearing bit and the core clears this bit
|
||||
* after all the necessary logic is reset in the core, which may take
|
||||
* several clocks, depending on the current state of the core.
|
||||
* Once this bit is cleared software should wait at least 3 PHY
|
||||
* clocks before doing any access to the PHY domain
|
||||
* the core. This is a self-clearing bit and the core clears this
|
||||
* bit after all the necessary logic is reset in the core, which
|
||||
* may take several clocks, depending on the current state of the
|
||||
* core. Once this bit is cleared software should wait at least 3
|
||||
* PHY clocks before doing any access to the PHY domain
|
||||
* (synchronization delay). Software should also should check that
|
||||
* bit 31 of this register is 1 (AHB Master is IDLE) before starting
|
||||
* any operation.
|
||||
* bit 31 of this register is 1 (AHB Master is IDLE) before
|
||||
* starting any operation.
|
||||
* Typically software reset is used during software development
|
||||
* and also when you dynamically change the PHY selection bits
|
||||
* in the USB configuration registers listed above. When you
|
||||
@ -737,7 +748,8 @@ typedef union cvmx_usbcx_grstctl cvmx_usbcx_grstctl_t;
|
||||
*
|
||||
* Receive FIFO Size Register (GRXFSIZ)
|
||||
*
|
||||
* The application can program the RAM size that must be allocated to the RxFIFO.
|
||||
* The application can program the RAM size that must be allocated to the
|
||||
* RxFIFO.
|
||||
*/
|
||||
union cvmx_usbcx_grxfsiz {
|
||||
uint32_t u32;
|
||||
@ -760,10 +772,13 @@ typedef union cvmx_usbcx_grxfsiz cvmx_usbcx_grxfsiz_t;
|
||||
*
|
||||
* Receive Status Read and Pop Register, Host Mode (GRXSTSPH)
|
||||
*
|
||||
* A read to the Receive Status Read and Pop register returns and additionally pops the top data entry out of the RxFIFO.
|
||||
* This Description is only valid when the core is in Host Mode. For Device Mode use USBC_GRXSTSPD instead.
|
||||
* NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the same offset in the O2P USB core.
|
||||
* The offset difference shown in this document is for software clarity and is actually ignored by the
|
||||
* A read to the Receive Status Read and Pop register returns and additionally
|
||||
* pops the top data entry out of the RxFIFO.
|
||||
* This Description is only valid when the core is in Host Mode. For Device Mode
|
||||
* use USBC_GRXSTSPD instead.
|
||||
* NOTE: GRXSTSPH and GRXSTSPD are physically the same register and share the
|
||||
* same offset in the O2P USB core. The offset difference shown in this
|
||||
* document is for software clarity and is actually ignored by the
|
||||
* hardware.
|
||||
*/
|
||||
union cvmx_usbcx_grxstsph {
|
||||
@ -803,10 +818,11 @@ typedef union cvmx_usbcx_grxstsph cvmx_usbcx_grxstsph_t;
|
||||
*
|
||||
* Core USB Configuration Register (GUSBCFG)
|
||||
*
|
||||
* This register can be used to configure the core after power-on or a changing to Host mode or Device mode.
|
||||
* It contains USB and USB-PHY related configuration parameters. The application must program this register
|
||||
* before starting any transactions on either the AHB or the USB.
|
||||
* Do not make changes to this register after the initial programming.
|
||||
* This register can be used to configure the core after power-on or a changing
|
||||
* to Host mode or Device mode. It contains USB and USB-PHY related
|
||||
* configuration parameters. The application must program this register before
|
||||
* starting any transactions on either the AHB or the USB. Do not make changes
|
||||
* to this register after the initial programming.
|
||||
*/
|
||||
union cvmx_usbcx_gusbcfg {
|
||||
uint32_t u32;
|
||||
@ -856,9 +872,10 @@ union cvmx_usbcx_gusbcfg {
|
||||
* vary from one PHY to another.
|
||||
* The USB standard timeout value for high-speed operation is
|
||||
* 736 to 816 (inclusive) bit times. The USB standard timeout
|
||||
* value for full-speed operation is 16 to 18 (inclusive) bit times.
|
||||
* The application must program this field based on the speed of
|
||||
* enumeration. The number of bit times added per PHY clock are:
|
||||
* value for full-speed operation is 16 to 18 (inclusive) bit
|
||||
* times. The application must program this field based on the
|
||||
* speed of enumeration. The number of bit times added per PHY
|
||||
* clock are:
|
||||
* High-speed operation:
|
||||
* * One 30-MHz PHY clock = 16 bit times
|
||||
* * One 60-MHz PHY clock = 8 bit times
|
||||
@ -890,11 +907,12 @@ typedef union cvmx_usbcx_gusbcfg cvmx_usbcx_gusbcfg_t;
|
||||
*
|
||||
* Host All Channels Interrupt Register (HAINT)
|
||||
*
|
||||
* When a significant event occurs on a channel, the Host All Channels Interrupt register
|
||||
* interrupts the application using the Host Channels Interrupt bit of the Core Interrupt
|
||||
* register (GINTSTS.HChInt). This is shown in Interrupt . There is one interrupt bit per
|
||||
* channel, up to a maximum of 16 bits. Bits in this register are set and cleared when the
|
||||
* application sets and clears bits in the corresponding Host Channel-n Interrupt register.
|
||||
* When a significant event occurs on a channel, the Host All Channels Interrupt
|
||||
* register interrupts the application using the Host Channels Interrupt bit of
|
||||
* the Core Interrupt register (GINTSTS.HChInt). This is shown in Interrupt.
|
||||
* There is one interrupt bit per channel, up to a maximum of 16 bits. Bits in
|
||||
* this register are set and cleared when the application sets and clears bits
|
||||
* in the corresponding Host Channel-n Interrupt register.
|
||||
*/
|
||||
union cvmx_usbcx_haint {
|
||||
uint32_t u32;
|
||||
@ -915,9 +933,10 @@ typedef union cvmx_usbcx_haint cvmx_usbcx_haint_t;
|
||||
*
|
||||
* Host All Channels Interrupt Mask Register (HAINTMSK)
|
||||
*
|
||||
* The Host All Channel Interrupt Mask register works with the Host All Channel Interrupt
|
||||
* register to interrupt the application when an event occurs on a channel. There is one
|
||||
* interrupt mask bit per channel, up to a maximum of 16 bits.
|
||||
* The Host All Channel Interrupt Mask register works with the Host All Channel
|
||||
* Interrupt register to interrupt the application when an event occurs on a
|
||||
* channel. There is one interrupt mask bit per channel, up to a maximum of 16
|
||||
* bits.
|
||||
* Mask interrupt: 1'b0 Unmask interrupt: 1'b1
|
||||
*/
|
||||
union cvmx_usbcx_haintmsk {
|
||||
@ -945,24 +964,25 @@ union cvmx_usbcx_hccharx {
|
||||
/**
|
||||
* struct cvmx_usbcx_hccharx_s
|
||||
* @chena: Channel Enable (ChEna)
|
||||
* This field is set by the application and cleared by the OTG host.
|
||||
* This field is set by the application and cleared by the OTG
|
||||
* host.
|
||||
* * 1'b0: Channel disabled
|
||||
* * 1'b1: Channel enabled
|
||||
* @chdis: Channel Disable (ChDis)
|
||||
* The application sets this bit to stop transmitting/receiving data
|
||||
* on a channel, even before the transfer for that channel is
|
||||
* The application sets this bit to stop transmitting/receiving
|
||||
* data on a channel, even before the transfer for that channel is
|
||||
* complete. The application must wait for the Channel Disabled
|
||||
* interrupt before treating the channel as disabled.
|
||||
* @oddfrm: Odd Frame (OddFrm)
|
||||
* This field is set (reset) by the application to indicate that the
|
||||
* OTG host must perform a transfer in an odd (micro)frame. This
|
||||
* field is applicable for only periodic (isochronous and interrupt)
|
||||
* transactions.
|
||||
* This field is set (reset) by the application to indicate that
|
||||
* the OTG host must perform a transfer in an odd (micro)frame.
|
||||
* This field is applicable for only periodic (isochronous and
|
||||
* interrupt) transactions.
|
||||
* * 1'b0: Even (micro)frame
|
||||
* * 1'b1: Odd (micro)frame
|
||||
* @devaddr: Device Address (DevAddr)
|
||||
* This field selects the specific device serving as the data source
|
||||
* or sink.
|
||||
* This field selects the specific device serving as the data
|
||||
* source or sink.
|
||||
* @ec: Multi Count (MC) / Error Count (EC)
|
||||
* When the Split Enable bit of the Host Channel-n Split Control
|
||||
* register (HCSPLTn.SpltEna) is reset (1'b0), this field indicates
|
||||
@ -985,8 +1005,8 @@ union cvmx_usbcx_hccharx {
|
||||
* * 2'b10: Bulk
|
||||
* * 2'b11: Interrupt
|
||||
* @lspddev: Low-Speed Device (LSpdDev)
|
||||
* This field is set by the application to indicate that this channel is
|
||||
* communicating to a low-speed device.
|
||||
* This field is set by the application to indicate that this
|
||||
* channel is communicating to a low-speed device.
|
||||
* @epdir: Endpoint Direction (EPDir)
|
||||
* Indicates whether the transaction is IN or OUT.
|
||||
* * 1'b0: OUT
|
||||
@ -1018,7 +1038,8 @@ typedef union cvmx_usbcx_hccharx cvmx_usbcx_hccharx_t;
|
||||
*
|
||||
* Host Configuration Register (HCFG)
|
||||
*
|
||||
* This register configures the core after power-on. Do not make changes to this register after initializing the host.
|
||||
* This register configures the core after power-on. Do not make changes to this
|
||||
* register after initializing the host.
|
||||
*/
|
||||
union cvmx_usbcx_hcfg {
|
||||
uint32_t u32;
|
||||
@ -1065,12 +1086,14 @@ typedef union cvmx_usbcx_hcfg cvmx_usbcx_hcfg_t;
|
||||
*
|
||||
* Host Channel-n Interrupt Register (HCINT)
|
||||
*
|
||||
* This register indicates the status of a channel with respect to USB- and AHB-related events.
|
||||
* The application must read this register when the Host Channels Interrupt bit of the Core Interrupt
|
||||
* register (GINTSTS.HChInt) is set. Before the application can read this register, it must first read
|
||||
* the Host All Channels Interrupt (HAINT) register to get the exact channel number for the Host Channel-n
|
||||
* Interrupt register. The application must clear the appropriate bit in this register to clear the
|
||||
* corresponding bits in the HAINT and GINTSTS registers.
|
||||
* This register indicates the status of a channel with respect to USB- and
|
||||
* AHB-related events. The application must read this register when the Host
|
||||
* Channels Interrupt bit of the Core Interrupt register (GINTSTS.HChInt) is
|
||||
* set. Before the application can read this register, it must first read
|
||||
* the Host All Channels Interrupt (HAINT) register to get the exact channel
|
||||
* number for the Host Channel-n Interrupt register. The application must clear
|
||||
* the appropriate bit in this register to clear the corresponding bits in the
|
||||
* HAINT and GINTSTS registers.
|
||||
*/
|
||||
union cvmx_usbcx_hcintx {
|
||||
uint32_t u32;
|
||||
@ -1114,7 +1137,8 @@ typedef union cvmx_usbcx_hcintx cvmx_usbcx_hcintx_t;
|
||||
*
|
||||
* Host Channel-n Interrupt Mask Register (HCINTMSKn)
|
||||
*
|
||||
* This register reflects the mask for each channel status described in the previous section.
|
||||
* This register reflects the mask for each channel status described in the
|
||||
* previous section.
|
||||
* Mask interrupt: 1'b0 Unmask interrupt: 1'b1
|
||||
*/
|
||||
union cvmx_usbcx_hcintmskx {
|
||||
@ -1167,16 +1191,16 @@ union cvmx_usbcx_hcspltx {
|
||||
* The application sets this field to request the OTG host to
|
||||
* perform a complete split transaction.
|
||||
* @xactpos: Transaction Position (XactPos)
|
||||
* This field is used to determine whether to send all, first, middle,
|
||||
* or last payloads with each OUT transaction.
|
||||
* * 2'b11: All. This is the entire data payload is of this transaction
|
||||
* (which is less than or equal to 188 bytes).
|
||||
* * 2'b10: Begin. This is the first data payload of this transaction
|
||||
* (which is larger than 188 bytes).
|
||||
* This field is used to determine whether to send all, first,
|
||||
* middle, or last payloads with each OUT transaction.
|
||||
* * 2'b11: All. This is the entire data payload is of this
|
||||
* transaction (which is less than or equal to 188 bytes).
|
||||
* * 2'b10: Begin. This is the first data payload of this
|
||||
* transaction (which is larger than 188 bytes).
|
||||
* * 2'b00: Mid. This is the middle payload of this transaction
|
||||
* (which is larger than 188 bytes).
|
||||
* * 2'b01: End. This is the last payload of this transaction (which
|
||||
* is larger than 188 bytes).
|
||||
* * 2'b01: End. This is the last payload of this transaction
|
||||
* (which is larger than 188 bytes).
|
||||
* @hubaddr: Hub Address (HubAddr)
|
||||
* This field holds the device address of the transaction
|
||||
* translator's hub.
|
||||
@ -1209,8 +1233,8 @@ union cvmx_usbcx_hctsizx {
|
||||
* Setting this field to 1 directs the host to do PING protocol.
|
||||
* @pid: PID (Pid)
|
||||
* The application programs this field with the type of PID to use
|
||||
* for the initial transaction. The host will maintain this field for the
|
||||
* rest of the transfer.
|
||||
* for the initial transaction. The host will maintain this field
|
||||
* for the rest of the transfer.
|
||||
* * 2'b00: DATA0
|
||||
* * 2'b01: DATA2
|
||||
* * 2'b10: DATA1
|
||||
@ -1225,8 +1249,8 @@ union cvmx_usbcx_hctsizx {
|
||||
* @xfersize: Transfer Size (XferSize)
|
||||
* For an OUT, this field is the number of data bytes the host will
|
||||
* send during the transfer.
|
||||
* For an IN, this field is the buffer size that the application has
|
||||
* reserved for the transfer. The application is expected to
|
||||
* For an IN, this field is the buffer size that the application
|
||||
* has reserved for the transfer. The application is expected to
|
||||
* program this field as an integer multiple of the maximum packet
|
||||
* size for IN transactions (periodic and non-periodic).
|
||||
*/
|
||||
@ -1244,7 +1268,8 @@ typedef union cvmx_usbcx_hctsizx cvmx_usbcx_hctsizx_t;
|
||||
*
|
||||
* Host Frame Interval Register (HFIR)
|
||||
*
|
||||
* This register stores the frame interval information for the current speed to which the O2P USB core has enumerated.
|
||||
* This register stores the frame interval information for the current speed to
|
||||
* which the O2P USB core has enumerated.
|
||||
*/
|
||||
union cvmx_usbcx_hfir {
|
||||
uint32_t u32;
|
||||
@ -1291,8 +1316,8 @@ union cvmx_usbcx_hfnum {
|
||||
* Indicates the amount of time remaining in the current
|
||||
* microframe (HS) or frame (FS/LS), in terms of PHY clocks.
|
||||
* This field decrements on each PHY clock. When it reaches
|
||||
* zero, this field is reloaded with the value in the Frame Interval
|
||||
* register and a new SOF is transmitted on the USB.
|
||||
* zero, this field is reloaded with the value in the Frame
|
||||
* Interval register and a new SOF is transmitted on the USB.
|
||||
* @frnum: Frame Number (FrNum)
|
||||
* This field increments when a new SOF is transmitted on the
|
||||
* USB, and is reset to 0 when it reaches 16'h3FFF.
|
||||
@ -1311,12 +1336,13 @@ typedef union cvmx_usbcx_hfnum cvmx_usbcx_hfnum_t;
|
||||
*
|
||||
* This register is available in both Host and Device modes.
|
||||
* Currently, the OTG Host supports only one port.
|
||||
* A single register holds USB port-related information such as USB reset, enable, suspend, resume,
|
||||
* connect status, and test mode for each port. The R_SS_WC bits in this register can trigger an
|
||||
* interrupt to the application through the Host Port Interrupt bit of the Core Interrupt
|
||||
* register (GINTSTS.PrtInt). On a Port Interrupt, the application must read this register and clear
|
||||
* the bit that caused the interrupt. For the R_SS_WC bits, the application must write a 1 to the bit
|
||||
* to clear the interrupt.
|
||||
* A single register holds USB port-related information such as USB reset,
|
||||
* enable, suspend, resume, connect status, and test mode for each port. The
|
||||
* R_SS_WC bits in this register can trigger an interrupt to the application
|
||||
* through the Host Port Interrupt bit of the Core Interrupt register
|
||||
* (GINTSTS.PrtInt). On a Port Interrupt, the application must read this
|
||||
* register and clear the bit that caused the interrupt. For the R_SS_WC bits,
|
||||
* the application must write a 1 to the bit to clear the interrupt.
|
||||
*/
|
||||
union cvmx_usbcx_hprt {
|
||||
uint32_t u32;
|
||||
@ -1449,7 +1475,8 @@ typedef union cvmx_usbcx_hprt cvmx_usbcx_hprt_t;
|
||||
*
|
||||
* Host Periodic Transmit FIFO Size Register (HPTXFSIZ)
|
||||
*
|
||||
* This register holds the size and the memory start address of the Periodic TxFIFO, as shown in Figures 310 and 311.
|
||||
* This register holds the size and the memory start address of the Periodic
|
||||
* TxFIFO, as shown in Figures 310 and 311.
|
||||
*/
|
||||
union cvmx_usbcx_hptxfsiz {
|
||||
uint32_t u32;
|
||||
@ -1473,8 +1500,8 @@ typedef union cvmx_usbcx_hptxfsiz cvmx_usbcx_hptxfsiz_t;
|
||||
*
|
||||
* Host Periodic Transmit FIFO/Queue Status Register (HPTXSTS)
|
||||
*
|
||||
* This read-only register contains the free space information for the Periodic TxFIFO and
|
||||
* the Periodic Transmit Request Queue
|
||||
* This read-only register contains the free space information for the Periodic
|
||||
* TxFIFO and the Periodic Transmit Request Queue
|
||||
*/
|
||||
union cvmx_usbcx_hptxsts {
|
||||
uint32_t u32;
|
||||
@ -1497,17 +1524,18 @@ union cvmx_usbcx_hptxsts {
|
||||
* channel/endpoint)
|
||||
* @ptxqspcavail: Periodic Transmit Request Queue Space Available
|
||||
* (PTxQSpcAvail)
|
||||
* Indicates the number of free locations available to be written in
|
||||
* the Periodic Transmit Request Queue. This queue holds both
|
||||
* Indicates the number of free locations available to be written
|
||||
* in the Periodic Transmit Request Queue. This queue holds both
|
||||
* IN and OUT requests.
|
||||
* * 8'h0: Periodic Transmit Request Queue is full
|
||||
* * 8'h1: 1 location available
|
||||
* * 8'h2: 2 locations available
|
||||
* * n: n locations available (0..8)
|
||||
* * Others: Reserved
|
||||
* @ptxfspcavail: Periodic Transmit Data FIFO Space Available (PTxFSpcAvail)
|
||||
* Indicates the number of free locations available to be written to
|
||||
* in the Periodic TxFIFO.
|
||||
* @ptxfspcavail: Periodic Transmit Data FIFO Space Available
|
||||
* (PTxFSpcAvail)
|
||||
* Indicates the number of free locations available to be written
|
||||
* to in the Periodic TxFIFO.
|
||||
* Values are in terms of 32-bit words
|
||||
* * 16'h0: Periodic TxFIFO is full
|
||||
* * 16'h1: 1 word available
|
||||
|
||||
Loading…
Reference in New Issue
Block a user