leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge branch 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Browse Source 
Pull x86 CPU feature updates from Thomas Gleixner:
 "Updates for x86 CPU features:

   - Support for UMWAIT/UMONITOR, which allows to use MWAIT and MONITOR
     instructions in user space to save power e.g. in HPC workloads
     which spin wait on synchronization points.

     The maximum time a MWAIT can halt in userspace is controlled by the
     kernel and can be adjusted by the sysadmin.

   - Speed up the MTRR handling code on CPUs which support cache
     self-snooping correctly.

     On those CPUs the wbinvd() invocations can be omitted which speeds
     up the MTRR setup by a factor of 50.

   - Support for the new x86 vendor Zhaoxin who develops processors
     based on the VIA Centaur technology.

   - Prevent 'cat /proc/cpuinfo' from affecting isolated NOHZ_FULL CPUs
     by sending IPIs to retrieve the CPU frequency and use the cached
     values instead.

   - The addition and late revert of the FSGSBASE support. The revert
     was required as it turned out that the code still has hard to
     diagnose issues. Yet another engineering trainwreck...

   - Small fixes, cleanups, improvements and the usual new Intel CPU
     family/model addons"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  x86/fsgsbase: Revert FSGSBASE support
  selftests/x86/fsgsbase: Fix some test case bugs
  x86/entry/64: Fix and clean up paranoid_exit
  x86/entry/64: Don't compile ignore_sysret if 32-bit emulation is enabled
  selftests/x86: Test SYSCALL and SYSENTER manually with TF set
  x86/mtrr: Skip cache flushes on CPUs with cache self-snooping
  x86/cpu/intel: Clear cache self-snoop capability in CPUs with known errata
  Documentation/ABI: Document umwait control sysfs interfaces
  x86/umwait: Add sysfs interface to control umwait maximum time
  x86/umwait: Add sysfs interface to control umwait C0.2 state
  x86/umwait: Initialize umwait control values
  x86/cpufeatures: Enumerate user wait instructions
  x86/cpu: Disable frequency requests via aperfmperf IPI for nohz_full CPUs
  x86/acpi/cstate: Add Zhaoxin processors support for cache flush policy in C3
  ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC
  x86/cpu: Create Zhaoxin processors architecture support file
  x86/cpu: Split Tremont based Atoms from the rest
  Documentation/x86/64: Add documentation for GS/FS addressing mode
  x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2
  x86/cpu: Enable FSGSBASE on 64bit by default and add a chicken bit
  ...
This commit is contained in:
Linus Torvalds 2019-07-08 11:59:59 -07:00
commit 13324c42c1
29 changed files with 871 additions and 88 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
Documentation/ABI/testing/sysfs-devices-system-cpu
View File

@ -538,3 +538,26 @@ Description: Intel Energy and Performance Bias Hint (EPB)
This attribute is present for all online CPUs supporting the
Intel EPB feature.
What: /sys/devices/system/cpu/umwait_control
/sys/devices/system/cpu/umwait_control/enable_c02
/sys/devices/system/cpu/umwait_control/max_time
Date: May 2019
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Umwait control
enable_c02: Read/write interface to control umwait C0.2 state
Read returns C0.2 state status:
0: C0.2 is disabled
1: C0.2 is enabled
Write 'y' or '1' or 'on' to enable C0.2 state.
Write 'n' or '0' or 'off' to disable C0.2 state.
The interface is case insensitive.
max_time: Read/write interface to control umwait maximum time
in TSC-quanta that the CPU can reside in either C0.1
or C0.2 state. The time is an unsigned 32-bit number.
Note that a value of zero means there is no limit.
Low order two bits must be zero.

6
Documentation/process/changes.rst
View File

@ -31,7 +31,7 @@ you probably needn't concern yourself with isdn4k-utils.
====================== =============== ========================================
GNU C 4.6 gcc --version
GNU make 3.81 make --version
binutils 2.20 ld -v
binutils 2.21 ld -v
flex 2.5.35 flex --version
bison 2.0 bison --version
util-linux 2.10o fdformat --version
@ -77,9 +77,7 @@ You will need GNU make 3.81 or later to build the kernel.
Binutils
--------
The build system has, as of 4.13, switched to using thin archives (`ar T`)
rather than incremental linking (`ld -r`) for built-in.a intermediate steps.
This requires binutils 2.20 or newer.
Binutils 2.21 or newer is needed to build the kernel.
pkg-config
----------

6
MAINTAINERS
View File

@ -17523,6 +17523,12 @@ Q: https://patchwork.linuxtv.org/project/linux-media/list/
S: Maintained
F: drivers/media/dvb-frontends/zd1301_demod*
ZHAOXIN PROCESSOR SUPPORT
M: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
L: linux-kernel@vger.kernel.org
S: Maintained
F: arch/x86/kernel/cpu/zhaoxin.c
ZPOOL COMPRESSED PAGE STORAGE API
M: Dan Streetman <ddstreet@ieee.org>
L: linux-mm@kvack.org

13
arch/x86/Kconfig.cpu
View File

@ -480,3 +480,16 @@ config CPU_SUP_UMC_32
CPU might render the kernel unbootable.
If unsure, say N.
config CPU_SUP_ZHAOXIN
default y
bool "Support Zhaoxin processors" if PROCESSOR_SELECT
help
This enables detection, tunings and quirks for Zhaoxin processors
You need this enabled if you want your kernel to run on a
Zhaoxin CPU. Disabling this option on other types of CPUs
makes the kernel a tiny bit smaller. Disabling it on a Zhaoxin
CPU might render the kernel unbootable.
If unsure, say N.

6
arch/x86/entry/entry_64.S
View File

@ -1692,11 +1692,17 @@ nmi_restore:
iretq
END(nmi)
#ifndef CONFIG_IA32_EMULATION
/*
* This handles SYSCALL from 32-bit code. There is no way to program
* MSRs to fully disable 32-bit SYSCALL.
*/
ENTRY(ignore_sysret)
UNWIND_HINT_EMPTY
mov $-ENOSYS, %eax
sysret
END(ignore_sysret)
#endif
ENTRY(rewind_stack_do_exit)
UNWIND_HINT_FUNC

1
arch/x86/events/intel/uncore.c
View File

@ -1400,6 +1400,7 @@ static const struct x86_cpu_id intel_uncore_match[] __initconst = {
X86_UNCORE_MODEL_MATCH(INTEL_FAM6_KABYLAKE_MOBILE, skl_uncore_init),
X86_UNCORE_MODEL_MATCH(INTEL_FAM6_KABYLAKE_DESKTOP, skl_uncore_init),
X86_UNCORE_MODEL_MATCH(INTEL_FAM6_ICELAKE_MOBILE, icl_uncore_init),
X86_UNCORE_MODEL_MATCH(INTEL_FAM6_ICELAKE_NNPI, icl_uncore_init),
{},
};

4
arch/x86/include/asm/cpufeature.h
View File

@ -22,8 +22,8 @@ enum cpuid_leafs
CPUID_LNX_3,
CPUID_7_0_EBX,
CPUID_D_1_EAX,
CPUID_F_0_EDX,
CPUID_F_1_EDX,
CPUID_LNX_4,
CPUID_7_1_EAX,
CPUID_8000_0008_EBX,
CPUID_6_EAX,
CPUID_8000_000A_EDX,

21
arch/x86/include/asm/cpufeatures.h
View File

@ -239,12 +239,14 @@
#define X86_FEATURE_BMI1 ( 9*32+ 3) /* 1st group bit manipulation extensions */
#define X86_FEATURE_HLE ( 9*32+ 4) /* Hardware Lock Elision */
#define X86_FEATURE_AVX2 ( 9*32+ 5) /* AVX2 instructions */
#define X86_FEATURE_FDP_EXCPTN_ONLY ( 9*32+ 6) /* "" FPU data pointer updated only on x87 exceptions */
#define X86_FEATURE_SMEP ( 9*32+ 7) /* Supervisor Mode Execution Protection */
#define X86_FEATURE_BMI2 ( 9*32+ 8) /* 2nd group bit manipulation extensions */
#define X86_FEATURE_ERMS ( 9*32+ 9) /* Enhanced REP MOVSB/STOSB instructions */
#define X86_FEATURE_INVPCID ( 9*32+10) /* Invalidate Processor Context ID */
#define X86_FEATURE_RTM ( 9*32+11) /* Restricted Transactional Memory */
#define X86_FEATURE_CQM ( 9*32+12) /* Cache QoS Monitoring */
#define X86_FEATURE_ZERO_FCS_FDS ( 9*32+13) /* "" Zero out FPU CS and FPU DS */
#define X86_FEATURE_MPX ( 9*32+14) /* Memory Protection Extension */
#define X86_FEATURE_RDT_A ( 9*32+15) /* Resource Director Technology Allocation */
#define X86_FEATURE_AVX512F ( 9*32+16) /* AVX-512 Foundation */
@ -269,13 +271,19 @@
#define X86_FEATURE_XGETBV1 (10*32+ 2) /* XGETBV with ECX = 1 instruction */
#define X86_FEATURE_XSAVES (10*32+ 3) /* XSAVES/XRSTORS instructions */
/* Intel-defined CPU QoS Sub-leaf, CPUID level 0x0000000F:0 (EDX), word 11 */
#define X86_FEATURE_CQM_LLC (11*32+ 1) /* LLC QoS if 1 */
/*
* Extended auxiliary flags: Linux defined - for features scattered in various
* CPUID levels like 0xf, etc.
*
* Reuse free bits when adding new feature flags!
*/
#define X86_FEATURE_CQM_LLC (11*32+ 0) /* LLC QoS if 1 */
#define X86_FEATURE_CQM_OCCUP_LLC (11*32+ 1) /* LLC occupancy monitoring */
#define X86_FEATURE_CQM_MBM_TOTAL (11*32+ 2) /* LLC Total MBM monitoring */
#define X86_FEATURE_CQM_MBM_LOCAL (11*32+ 3) /* LLC Local MBM monitoring */
/* Intel-defined CPU QoS Sub-leaf, CPUID level 0x0000000F:1 (EDX), word 12 */
#define X86_FEATURE_CQM_OCCUP_LLC (12*32+ 0) /* LLC occupancy monitoring */
#define X86_FEATURE_CQM_MBM_TOTAL (12*32+ 1) /* LLC Total MBM monitoring */
#define X86_FEATURE_CQM_MBM_LOCAL (12*32+ 2) /* LLC Local MBM monitoring */
/* Intel-defined CPU features, CPUID level 0x00000007:1 (EAX), word 12 */
#define X86_FEATURE_AVX512_BF16 (12*32+ 5) /* AVX512 BFLOAT16 instructions */
/* AMD-defined CPU features, CPUID level 0x80000008 (EBX), word 13 */
#define X86_FEATURE_CLZERO (13*32+ 0) /* CLZERO instruction */
@ -322,6 +330,7 @@
#define X86_FEATURE_UMIP (16*32+ 2) /* User Mode Instruction Protection */
#define X86_FEATURE_PKU (16*32+ 3) /* Protection Keys for Userspace */
#define X86_FEATURE_OSPKE (16*32+ 4) /* OS Protection Keys Enable */
#define X86_FEATURE_WAITPKG (16*32+ 5) /* UMONITOR/UMWAIT/TPAUSE Instructions */
#define X86_FEATURE_AVX512_VBMI2 (16*32+ 6) /* Additional AVX512 Vector Bit Manipulation Instructions */
#define X86_FEATURE_GFNI (16*32+ 8) /* Galois Field New Instructions */
#define X86_FEATURE_VAES (16*32+ 9) /* Vector AES */

2
arch/x86/include/asm/intel-family.h
View File

@ -56,6 +56,7 @@
#define INTEL_FAM6_ICELAKE_XEON_D 0x6C
#define INTEL_FAM6_ICELAKE_DESKTOP 0x7D
#define INTEL_FAM6_ICELAKE_MOBILE 0x7E
#define INTEL_FAM6_ICELAKE_NNPI 0x9D
/* "Small Core" Processors (Atom) */
@ -76,6 +77,7 @@
#define INTEL_FAM6_ATOM_GOLDMONT 0x5C /* Apollo Lake */
#define INTEL_FAM6_ATOM_GOLDMONT_X 0x5F /* Denverton */
#define INTEL_FAM6_ATOM_GOLDMONT_PLUS 0x7A /* Gemini Lake */
#define INTEL_FAM6_ATOM_TREMONT_X 0x86 /* Jacobsville */
/* Xeon Phi */

9
arch/x86/include/asm/msr-index.h
View File

@ -61,6 +61,15 @@
#define MSR_PLATFORM_INFO_CPUID_FAULT_BIT 31
#define MSR_PLATFORM_INFO_CPUID_FAULT BIT_ULL(MSR_PLATFORM_INFO_CPUID_FAULT_BIT)
#define MSR_IA32_UMWAIT_CONTROL 0xe1
#define MSR_IA32_UMWAIT_CONTROL_C02_DISABLE BIT(0)
#define MSR_IA32_UMWAIT_CONTROL_RESERVED BIT(1)
/*
* The time field is bit[31:2], but representing a 32bit value with
* bit[1:0] zero.
*/
#define MSR_IA32_UMWAIT_CONTROL_TIME_MASK (~0x03U)
#define MSR_PKG_CST_CONFIG_CONTROL 0x000000e2
#define NHM_C3_AUTO_DEMOTE (1UL << 25)
#define NHM_C1_AUTO_DEMOTE (1UL << 26)

3
arch/x86/include/asm/processor.h
View File

@ -144,7 +144,8 @@ enum cpuid_regs_idx {
#define X86_VENDOR_TRANSMETA 7
#define X86_VENDOR_NSC 8
#define X86_VENDOR_HYGON 9
#define X86_VENDOR_NUM 10
#define X86_VENDOR_ZHAOXIN 10
#define X86_VENDOR_NUM 11
#define X86_VENDOR_UNKNOWN 0xff

15
arch/x86/kernel/acpi/cstate.c
View File

@ -64,6 +64,21 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags,
c->x86_stepping >= 0x0e))
flags->bm_check = 1;
}
if (c->x86_vendor == X86_VENDOR_ZHAOXIN) {
/*
* All Zhaoxin CPUs that support C3 share cache.
* And caches should not be flushed by software while
* entering C3 type state.
*/
flags->bm_check = 1;
/*
* On all recent Zhaoxin platforms, ARB_DISABLE is a nop.
* So, set bm_control to zero to indicate that ARB_DISABLE
* is not required while entering C3 type state.
*/
flags->bm_control = 0;
}
}
EXPORT_SYMBOL(acpi_processor_power_init_bm_check);

2
arch/x86/kernel/cpu/Makefile
View File

@ -24,6 +24,7 @@ obj-y += match.o
obj-y += bugs.o
obj-y += aperfmperf.o
obj-y += cpuid-deps.o
obj-y += umwait.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_X86_FEATURE_NAMES) += capflags.o powerflags.o
@ -38,6 +39,7 @@ obj-$(CONFIG_CPU_SUP_CYRIX_32) += cyrix.o
obj-$(CONFIG_CPU_SUP_CENTAUR) += centaur.o
obj-$(CONFIG_CPU_SUP_TRANSMETA_32) += transmeta.o
obj-$(CONFIG_CPU_SUP_UMC_32) += umc.o
obj-$(CONFIG_CPU_SUP_ZHAOXIN) += zhaoxin.o
obj-$(CONFIG_X86_MCE) += mce/
obj-$(CONFIG_MTRR) += mtrr/

12
arch/x86/kernel/cpu/aperfmperf.c
View File

@ -13,6 +13,7 @@
#include <linux/percpu.h>
#include <linux/cpufreq.h>
#include <linux/smp.h>
#include <linux/sched/isolation.h>
#include "cpu.h"
@ -85,6 +86,9 @@ unsigned int aperfmperf_get_khz(int cpu)
if (!boot_cpu_has(X86_FEATURE_APERFMPERF))
return 0;
if (!housekeeping_cpu(cpu, HK_FLAG_MISC))
return 0;
aperfmperf_snapshot_cpu(cpu, ktime_get(), true);
return per_cpu(samples.khz, cpu);
}
@ -101,9 +105,12 @@ void arch_freq_prepare_all(void)
if (!boot_cpu_has(X86_FEATURE_APERFMPERF))
return;
for_each_online_cpu(cpu)
for_each_online_cpu(cpu) {
if (!housekeeping_cpu(cpu, HK_FLAG_MISC))
continue;
if (!aperfmperf_snapshot_cpu(cpu, now, false))
wait = true;
}
if (wait)
msleep(APERFMPERF_REFRESH_DELAY_MS);
@ -117,6 +124,9 @@ unsigned int arch_freq_get_on_cpu(int cpu)
if (!boot_cpu_has(X86_FEATURE_APERFMPERF))
return 0;
if (!housekeeping_cpu(cpu, HK_FLAG_MISC))
return 0;
if (aperfmperf_snapshot_cpu(cpu, ktime_get(), true))
return per_cpu(samples.khz, cpu);

3
arch/x86/kernel/cpu/cacheinfo.c
View File

@ -658,8 +658,7 @@ void cacheinfo_amd_init_llc_id(struct cpuinfo_x86 *c, int cpu, u8 node_id)
if (c->x86 < 0x17) {
/* LLC is at the node level. */
per_cpu(cpu_llc_id, cpu) = node_id;
} else if (c->x86 == 0x17 &&
c->x86_model >= 0 && c->x86_model <= 0x1F) {
} else if (c->x86 == 0x17 && c->x86_model <= 0x1F) {
/*
* LLC is at the core complex level.
* Core complex ID is ApicId[3] for these processors.

58
arch/x86/kernel/cpu/common.c
View File

@ -801,6 +801,30 @@ static void init_speculation_control(struct cpuinfo_x86 *c)
}
}
static void init_cqm(struct cpuinfo_x86 *c)
{
if (!cpu_has(c, X86_FEATURE_CQM_LLC)) {
c->x86_cache_max_rmid = -1;
c->x86_cache_occ_scale = -1;
return;
}
/* will be overridden if occupancy monitoring exists */
c->x86_cache_max_rmid = cpuid_ebx(0xf);
if (cpu_has(c, X86_FEATURE_CQM_OCCUP_LLC) ||
cpu_has(c, X86_FEATURE_CQM_MBM_TOTAL) ||
cpu_has(c, X86_FEATURE_CQM_MBM_LOCAL)) {
u32 eax, ebx, ecx, edx;
/* QoS sub-leaf, EAX=0Fh, ECX=1 */
cpuid_count(0xf, 1, &eax, &ebx, &ecx, &edx);
c->x86_cache_max_rmid = ecx;
c->x86_cache_occ_scale = ebx;
}
}
void get_cpu_cap(struct cpuinfo_x86 *c)
{
u32 eax, ebx, ecx, edx;
@ -823,6 +847,12 @@ void get_cpu_cap(struct cpuinfo_x86 *c)
c->x86_capability[CPUID_7_0_EBX] = ebx;
c->x86_capability[CPUID_7_ECX] = ecx;
c->x86_capability[CPUID_7_EDX] = edx;
/* Check valid sub-leaf index before accessing it */
if (eax >= 1) {
cpuid_count(0x00000007, 1, &eax, &ebx, &ecx, &edx);
c->x86_capability[CPUID_7_1_EAX] = eax;
}
}
/* Extended state features: level 0x0000000d */
@ -832,33 +862,6 @@ void get_cpu_cap(struct cpuinfo_x86 *c)
c->x86_capability[CPUID_D_1_EAX] = eax;
}
/* Additional Intel-defined flags: level 0x0000000F */
if (c->cpuid_level >= 0x0000000F) {
/* QoS sub-leaf, EAX=0Fh, ECX=0 */
cpuid_count(0x0000000F, 0, &eax, &ebx, &ecx, &edx);
c->x86_capability[CPUID_F_0_EDX] = edx;
if (cpu_has(c, X86_FEATURE_CQM_LLC)) {
/* will be overridden if occupancy monitoring exists */
c->x86_cache_max_rmid = ebx;
/* QoS sub-leaf, EAX=0Fh, ECX=1 */
cpuid_count(0x0000000F, 1, &eax, &ebx, &ecx, &edx);
c->x86_capability[CPUID_F_1_EDX] = edx;
if ((cpu_has(c, X86_FEATURE_CQM_OCCUP_LLC)) ||
((cpu_has(c, X86_FEATURE_CQM_MBM_TOTAL)) ||
(cpu_has(c, X86_FEATURE_CQM_MBM_LOCAL)))) {
c->x86_cache_max_rmid = ecx;
c->x86_cache_occ_scale = ebx;
}
} else {
c->x86_cache_max_rmid = -1;
c->x86_cache_occ_scale = -1;
}
}
/* AMD-defined flags: level 0x80000001 */
eax = cpuid_eax(0x80000000);
c->extended_cpuid_level = eax;
@ -889,6 +892,7 @@ void get_cpu_cap(struct cpuinfo_x86 *c)
init_scattered_cpuid_features(c);
init_speculation_control(c);
init_cqm(c);
/*
* Clear/Set all flags overridden by options, after probe.

4
arch/x86/kernel/cpu/cpuid-deps.c
View File

@ -64,6 +64,10 @@ static const struct cpuid_dep cpuid_deps[] = {
{ X86_FEATURE_AVX512_4VNNIW, X86_FEATURE_AVX512F },
{ X86_FEATURE_AVX512_4FMAPS, X86_FEATURE_AVX512F },
{ X86_FEATURE_AVX512_VPOPCNTDQ, X86_FEATURE_AVX512F },
{ X86_FEATURE_CQM_OCCUP_LLC, X86_FEATURE_CQM_LLC },
{ X86_FEATURE_CQM_MBM_TOTAL, X86_FEATURE_CQM_LLC },
{ X86_FEATURE_CQM_MBM_LOCAL, X86_FEATURE_CQM_LLC },
{ X86_FEATURE_AVX512_BF16, X86_FEATURE_AVX512VL },
{}
};

27
arch/x86/kernel/cpu/intel.c
View File

@ -66,6 +66,32 @@ void check_mpx_erratum(struct cpuinfo_x86 *c)
}
}
/*
* Processors which have self-snooping capability can handle conflicting
* memory type across CPUs by snooping its own cache. However, there exists
* CPU models in which having conflicting memory types still leads to
* unpredictable behavior, machine check errors, or hangs. Clear this
* feature to prevent its use on machines with known erratas.
*/
static void check_memory_type_self_snoop_errata(struct cpuinfo_x86 *c)
{
switch (c->x86_model) {
case INTEL_FAM6_CORE_YONAH:
case INTEL_FAM6_CORE2_MEROM:
case INTEL_FAM6_CORE2_MEROM_L:
case INTEL_FAM6_CORE2_PENRYN:
case INTEL_FAM6_CORE2_DUNNINGTON:
case INTEL_FAM6_NEHALEM:
case INTEL_FAM6_NEHALEM_G:
case INTEL_FAM6_NEHALEM_EP:
case INTEL_FAM6_NEHALEM_EX:
case INTEL_FAM6_WESTMERE:
case INTEL_FAM6_WESTMERE_EP:
case INTEL_FAM6_SANDYBRIDGE:
setup_clear_cpu_cap(X86_FEATURE_SELFSNOOP);
}
}
static bool ring3mwait_disabled __read_mostly;
static int __init ring3mwait_disable(char *__unused)
@ -304,6 +330,7 @@ static void early_init_intel(struct cpuinfo_x86 *c)
}
check_mpx_erratum(c);
check_memory_type_self_snoop_errata(c);
/*
* Get the number of SMT siblings early from the extended topology

15
arch/x86/kernel/cpu/mtrr/generic.c
View File

@ -743,7 +743,15 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
/* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
cr0 = read_cr0() | X86_CR0_CD;
write_cr0(cr0);
wbinvd();
/*
* Cache flushing is the most time-consuming step when programming
* the MTRRs. Fortunately, as per the Intel Software Development
* Manual, we can skip it if the processor supports cache self-
* snooping.
*/
if (!static_cpu_has(X86_FEATURE_SELFSNOOP))
wbinvd();
/* Save value of CR4 and clear Page Global Enable (bit 7) */
if (boot_cpu_has(X86_FEATURE_PGE)) {
@ -760,7 +768,10 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
/* Disable MTRRs, and set the default type to uncached */
mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi);
wbinvd();
/* Again, only flush caches if we have to. */
if (!static_cpu_has(X86_FEATURE_SELFSNOOP))
wbinvd();
}
static void post_set(void) __releases(set_atomicity_lock)

4
arch/x86/kernel/cpu/scattered.c
View File

@ -26,6 +26,10 @@ struct cpuid_bit {
static const struct cpuid_bit cpuid_bits[] = {
{ X86_FEATURE_APERFMPERF, CPUID_ECX, 0, 0x00000006, 0 },
{ X86_FEATURE_EPB, CPUID_ECX, 3, 0x00000006, 0 },
{ X86_FEATURE_CQM_LLC, CPUID_EDX, 1, 0x0000000f, 0 },
{ X86_FEATURE_CQM_OCCUP_LLC, CPUID_EDX, 0, 0x0000000f, 1 },
{ X86_FEATURE_CQM_MBM_TOTAL, CPUID_EDX, 1, 0x0000000f, 1 },
{ X86_FEATURE_CQM_MBM_LOCAL, CPUID_EDX, 2, 0x0000000f, 1 },
{ X86_FEATURE_CAT_L3, CPUID_EBX, 1, 0x00000010, 0 },
{ X86_FEATURE_CAT_L2, CPUID_EBX, 2, 0x00000010, 0 },
{ X86_FEATURE_CDP_L3, CPUID_ECX, 2, 0x00000010, 1 },

200
arch/x86/kernel/cpu/umwait.c Normal file
View File

@ -0,0 +1,200 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/syscore_ops.h>
#include <linux/suspend.h>
#include <linux/cpu.h>
#include <asm/msr.h>
#define UMWAIT_C02_ENABLE 0
#define UMWAIT_CTRL_VAL(max_time, c02_disable) \
(((max_time) & MSR_IA32_UMWAIT_CONTROL_TIME_MASK) | \
((c02_disable) & MSR_IA32_UMWAIT_CONTROL_C02_DISABLE))
/*
* Cache IA32_UMWAIT_CONTROL MSR. This is a systemwide control. By default,
* umwait max time is 100000 in TSC-quanta and C0.2 is enabled
*/
static u32 umwait_control_cached = UMWAIT_CTRL_VAL(100000, UMWAIT_C02_ENABLE);
/*
* Serialize access to umwait_control_cached and IA32_UMWAIT_CONTROL MSR in
* the sysfs write functions.
*/
static DEFINE_MUTEX(umwait_lock);
static void umwait_update_control_msr(void * unused)
{
lockdep_assert_irqs_disabled();
wrmsr(MSR_IA32_UMWAIT_CONTROL, READ_ONCE(umwait_control_cached), 0);
}
/*
* The CPU hotplug callback sets the control MSR to the global control
* value.
*
* Disable interrupts so the read of umwait_control_cached and the WRMSR
* are protected against a concurrent sysfs write. Otherwise the sysfs
* write could update the cached value after it had been read on this CPU
* and issue the IPI before the old value had been written. The IPI would
* interrupt, write the new value and after return from IPI the previous
* value would be written by this CPU.
*
* With interrupts disabled the upcoming CPU either sees the new control
* value or the IPI is updating this CPU to the new control value after
* interrupts have been reenabled.
*/
static int umwait_cpu_online(unsigned int cpu)
{
local_irq_disable();
umwait_update_control_msr(NULL);
local_irq_enable();
return 0;
}
/*
* On resume, restore IA32_UMWAIT_CONTROL MSR on the boot processor which
* is the only active CPU at this time. The MSR is set up on the APs via the
* CPU hotplug callback.
*
* This function is invoked on resume from suspend and hibernation. On
* resume from suspend the restore should be not required, but we neither
* trust the firmware nor does it matter if the same value is written
* again.
*/
static void umwait_syscore_resume(void)
{
umwait_update_control_msr(NULL);
}
static struct syscore_ops umwait_syscore_ops = {
.resume = umwait_syscore_resume,
};
/* sysfs interface */
/*
* When bit 0 in IA32_UMWAIT_CONTROL MSR is 1, C0.2 is disabled.
* Otherwise, C0.2 is enabled.
*/
static inline bool umwait_ctrl_c02_enabled(u32 ctrl)
{
return !(ctrl & MSR_IA32_UMWAIT_CONTROL_C02_DISABLE);
}
static inline u32 umwait_ctrl_max_time(u32 ctrl)
{
return ctrl & MSR_IA32_UMWAIT_CONTROL_TIME_MASK;
}
static inline void umwait_update_control(u32 maxtime, bool c02_enable)
{
u32 ctrl = maxtime & MSR_IA32_UMWAIT_CONTROL_TIME_MASK;
if (!c02_enable)
ctrl |= MSR_IA32_UMWAIT_CONTROL_C02_DISABLE;
WRITE_ONCE(umwait_control_cached, ctrl);
/* Propagate to all CPUs */
on_each_cpu(umwait_update_control_msr, NULL, 1);
}
static ssize_t
enable_c02_show(struct device *dev, struct device_attribute *attr, char *buf)
{
u32 ctrl = READ_ONCE(umwait_control_cached);
return sprintf(buf, "%d\n", umwait_ctrl_c02_enabled(ctrl));
}
static ssize_t enable_c02_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
bool c02_enable;
u32 ctrl;
int ret;
ret = kstrtobool(buf, &c02_enable);
if (ret)
return ret;
mutex_lock(&umwait_lock);
ctrl = READ_ONCE(umwait_control_cached);
if (c02_enable != umwait_ctrl_c02_enabled(ctrl))
umwait_update_control(ctrl, c02_enable);
mutex_unlock(&umwait_lock);
return count;
}
static DEVICE_ATTR_RW(enable_c02);
static ssize_t
max_time_show(struct device *kobj, struct device_attribute *attr, char *buf)
{
u32 ctrl = READ_ONCE(umwait_control_cached);
return sprintf(buf, "%u\n", umwait_ctrl_max_time(ctrl));
}
static ssize_t max_time_store(struct device *kobj,
struct device_attribute *attr,
const char *buf, size_t count)
{
u32 max_time, ctrl;
int ret;
ret = kstrtou32(buf, 0, &max_time);
if (ret)
return ret;
/* bits[1:0] must be zero */
if (max_time & ~MSR_IA32_UMWAIT_CONTROL_TIME_MASK)
return -EINVAL;
mutex_lock(&umwait_lock);
ctrl = READ_ONCE(umwait_control_cached);
if (max_time != umwait_ctrl_max_time(ctrl))
umwait_update_control(max_time, umwait_ctrl_c02_enabled(ctrl));
mutex_unlock(&umwait_lock);
return count;
}
static DEVICE_ATTR_RW(max_time);
static struct attribute *umwait_attrs[] = {
&dev_attr_enable_c02.attr,
&dev_attr_max_time.attr,
NULL
};
static struct attribute_group umwait_attr_group = {
.attrs = umwait_attrs,
.name = "umwait_control",
};
static int __init umwait_init(void)
{
struct device *dev;
int ret;
if (!boot_cpu_has(X86_FEATURE_WAITPKG))
return -ENODEV;
ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "umwait:online",
umwait_cpu_online, NULL);
register_syscore_ops(&umwait_syscore_ops);
/*
* Add umwait control interface. Ignore failure, so at least the
* default values are set up in case the machine manages to boot.
*/
dev = cpu_subsys.dev_root;
return sysfs_create_group(&dev->kobj, &umwait_attr_group);
}
device_initcall(umwait_init);

167
arch/x86/kernel/cpu/zhaoxin.c Normal file
View File

@ -0,0 +1,167 @@
// SPDX-License-Identifier: GPL-2.0
#include <linux/sched.h>
#include <linux/sched/clock.h>
#include <asm/cpufeature.h>
#include "cpu.h"
#define MSR_ZHAOXIN_FCR57 0x00001257
#define ACE_PRESENT (1 << 6)
#define ACE_ENABLED (1 << 7)
#define ACE_FCR (1 << 7) /* MSR_ZHAOXIN_FCR */
#define RNG_PRESENT (1 << 2)
#define RNG_ENABLED (1 << 3)
#define RNG_ENABLE (1 << 8) /* MSR_ZHAOXIN_RNG */
#define X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW 0x00200000
#define X86_VMX_FEATURE_PROC_CTLS_VNMI 0x00400000
#define X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS 0x80000000
#define X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC 0x00000001
#define X86_VMX_FEATURE_PROC_CTLS2_EPT 0x00000002
#define X86_VMX_FEATURE_PROC_CTLS2_VPID 0x00000020
static void init_zhaoxin_cap(struct cpuinfo_x86 *c)
{
u32 lo, hi;
/* Test for Extended Feature Flags presence */
if (cpuid_eax(0xC0000000) >= 0xC0000001) {
u32 tmp = cpuid_edx(0xC0000001);
/* Enable ACE unit, if present and disabled */
if ((tmp & (ACE_PRESENT | ACE_ENABLED)) == ACE_PRESENT) {
rdmsr(MSR_ZHAOXIN_FCR57, lo, hi);
/* Enable ACE unit */
lo |= ACE_FCR;
wrmsr(MSR_ZHAOXIN_FCR57, lo, hi);
pr_info("CPU: Enabled ACE h/w crypto\n");
}
/* Enable RNG unit, if present and disabled */
if ((tmp & (RNG_PRESENT | RNG_ENABLED)) == RNG_PRESENT) {
rdmsr(MSR_ZHAOXIN_FCR57, lo, hi);
/* Enable RNG unit */
lo |= RNG_ENABLE;
wrmsr(MSR_ZHAOXIN_FCR57, lo, hi);
pr_info("CPU: Enabled h/w RNG\n");
}
/*
* Store Extended Feature Flags as word 5 of the CPU
* capability bit array
*/
c->x86_capability[CPUID_C000_0001_EDX] = cpuid_edx(0xC0000001);
}
if (c->x86 >= 0x6)
set_cpu_cap(c, X86_FEATURE_REP_GOOD);
cpu_detect_cache_sizes(c);
}
static void early_init_zhaoxin(struct cpuinfo_x86 *c)
{
if (c->x86 >= 0x6)
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
#ifdef CONFIG_X86_64
set_cpu_cap(c, X86_FEATURE_SYSENTER32);
#endif
if (c->x86_power & (1 << 8)) {
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
}
if (c->cpuid_level >= 0x00000001) {
u32 eax, ebx, ecx, edx;
cpuid(0x00000001, &eax, &ebx, &ecx, &edx);
/*
* If HTT (EDX[28]) is set EBX[16:23] contain the number of
* apicids which are reserved per package. Store the resulting
* shift value for the package management code.
*/
if (edx & (1U << 28))
c->x86_coreid_bits = get_count_order((ebx >> 16) & 0xff);
}
}
static void zhaoxin_detect_vmx_virtcap(struct cpuinfo_x86 *c)
{
u32 vmx_msr_low, vmx_msr_high, msr_ctl, msr_ctl2;
rdmsr(MSR_IA32_VMX_PROCBASED_CTLS, vmx_msr_low, vmx_msr_high);
msr_ctl = vmx_msr_high | vmx_msr_low;
if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW)
set_cpu_cap(c, X86_FEATURE_TPR_SHADOW);
if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_VNMI)
set_cpu_cap(c, X86_FEATURE_VNMI);
if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS) {
rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2,
vmx_msr_low, vmx_msr_high);
msr_ctl2 = vmx_msr_high | vmx_msr_low;
if ((msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC) &&
(msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW))
set_cpu_cap(c, X86_FEATURE_FLEXPRIORITY);
if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_EPT)
set_cpu_cap(c, X86_FEATURE_EPT);
if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VPID)
set_cpu_cap(c, X86_FEATURE_VPID);
}
}
static void init_zhaoxin(struct cpuinfo_x86 *c)
{
early_init_zhaoxin(c);
init_intel_cacheinfo(c);
detect_num_cpu_cores(c);
#ifdef CONFIG_X86_32
detect_ht(c);
#endif
if (c->cpuid_level > 9) {
unsigned int eax = cpuid_eax(10);
/*
* Check for version and the number of counters
* Version(eax[7:0]) can't be 0;
* Counters(eax[15:8]) should be greater than 1;
*/
if ((eax & 0xff) && (((eax >> 8) & 0xff) > 1))
set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
}
if (c->x86 >= 0x6)
init_zhaoxin_cap(c);
#ifdef CONFIG_X86_64
set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
#endif
if (cpu_has(c, X86_FEATURE_VMX))
zhaoxin_detect_vmx_virtcap(c);
}
#ifdef CONFIG_X86_32
static unsigned int
zhaoxin_size_cache(struct cpuinfo_x86 *c, unsigned int size)
{
return size;
}
#endif
static const struct cpu_dev zhaoxin_cpu_dev = {
.c_vendor = "zhaoxin",
.c_ident = { " Shanghai " },
.c_early_init = early_init_zhaoxin,
.c_init = init_zhaoxin,
#ifdef CONFIG_X86_32
.legacy_cache_size = zhaoxin_size_cache,
#endif
.c_x86_vendor = X86_VENDOR_ZHAOXIN,
};
cpu_dev_register(zhaoxin_cpu_dev);

14
arch/x86/kernel/ptrace.c
View File

@ -397,22 +397,12 @@ static int putreg(struct task_struct *child,
case offsetof(struct user_regs_struct,fs_base):
if (value >= TASK_SIZE_MAX)
return -EIO;
/*
* When changing the FS base, use do_arch_prctl_64()
* to set the index to zero and to set the base
* as requested.
*/
if (child->thread.fsbase != value)
return do_arch_prctl_64(child, ARCH_SET_FS, value);
x86_fsbase_write_task(child, value);
return 0;
case offsetof(struct user_regs_struct,gs_base):
/*
* Exactly the same here as the %fs handling above.
*/
if (value >= TASK_SIZE_MAX)
return -EIO;
if (child->thread.gsbase != value)
return do_arch_prctl_64(child, ARCH_SET_GS, value);
x86_gsbase_write_task(child, value);
return 0;
#endif
}

2
arch/x86/kvm/cpuid.h
View File

@ -47,8 +47,6 @@ static const struct cpuid_reg reverse_cpuid[] = {
[CPUID_8000_0001_ECX] = {0x80000001, 0, CPUID_ECX},
[CPUID_7_0_EBX] = { 7, 0, CPUID_EBX},
[CPUID_D_1_EAX] = { 0xd, 1, CPUID_EAX},
[CPUID_F_0_EDX] = { 0xf, 0, CPUID_EDX},
[CPUID_F_1_EDX] = { 0xf, 1, CPUID_EDX},
[CPUID_8000_0008_EBX] = {0x80000008, 0, CPUID_EBX},
[CPUID_6_EAX] = { 6, 0, CPUID_EAX},
[CPUID_8000_000A_EDX] = {0x8000000a, 0, CPUID_EDX},

1
drivers/acpi/acpi_pad.c
View File

@ -64,6 +64,7 @@ static void power_saving_mwait_init(void)
case X86_VENDOR_HYGON:
case X86_VENDOR_AMD:
case X86_VENDOR_INTEL:
case X86_VENDOR_ZHAOXIN:
/*
* AMD Fam10h TSC will tick in all
* C/P/S0/S1 states when this bit is set.

1
drivers/acpi/processor_idle.c
View File

@ -196,6 +196,7 @@ static void tsc_check_state(int state)
case X86_VENDOR_AMD:
case X86_VENDOR_INTEL:
case X86_VENDOR_CENTAUR:
case X86_VENDOR_ZHAOXIN:
/*
* AMD Fam10h TSC will tick in all
* C/P/S0/S1 states when this bit is set.

5
tools/testing/selftests/x86/Makefile
View File

@ -12,8 +12,9 @@ CAN_BUILD_WITH_NOPIE := $(shell ./check_cc.sh $(CC) trivial_program.c -no-pie)
TARGETS_C_BOTHBITS := single_step_syscall sysret_ss_attrs syscall_nt test_mremap_vdso \
check_initial_reg_state sigreturn iopl mpx-mini-test ioperm \
protection_keys test_vdso test_vsyscall mov_ss_trap
TARGETS_C_32BIT_ONLY := entry_from_vm86 syscall_arg_fault test_syscall_vdso unwind_vdso \
protection_keys test_vdso test_vsyscall mov_ss_trap \
syscall_arg_fault
TARGETS_C_32BIT_ONLY := entry_from_vm86 test_syscall_vdso unwind_vdso \
test_FCMOV test_FCOMI test_FISTTP \
vdso_restorer
TARGETS_C_64BIT_ONLY := fsgsbase sysret_rip

223
tools/testing/selftests/x86/fsgsbase.c
View File

@ -23,6 +23,10 @@
#include <pthread.h>
#include <asm/ldt.h>
#include <sys/mman.h>
#include <stddef.h>
#include <sys/ptrace.h>
#include <sys/wait.h>
#include <setjmp.h>
#ifndef __x86_64__
# error This test is 64-bit only
@ -31,6 +35,8 @@
static volatile sig_atomic_t want_segv;
static volatile unsigned long segv_addr;
static unsigned short *shared_scratch;
static int nerrs;
static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
@ -71,6 +77,43 @@ static void sigsegv(int sig, siginfo_t *si, void *ctx_void)
}
static jmp_buf jmpbuf;
static void sigill(int sig, siginfo_t *si, void *ctx_void)
{
siglongjmp(jmpbuf, 1);
}
static bool have_fsgsbase;
static inline unsigned long rdgsbase(void)
{
unsigned long gsbase;
asm volatile("rdgsbase %0" : "=r" (gsbase) :: "memory");
return gsbase;
}
static inline unsigned long rdfsbase(void)
{
unsigned long fsbase;
asm volatile("rdfsbase %0" : "=r" (fsbase) :: "memory");
return fsbase;
}
static inline void wrgsbase(unsigned long gsbase)
{
asm volatile("wrgsbase %0" :: "r" (gsbase) : "memory");
}
static inline void wrfsbase(unsigned long fsbase)
{
asm volatile("wrfsbase %0" :: "r" (fsbase) : "memory");
}
enum which_base { FS, GS };
static unsigned long read_base(enum which_base which)
@ -199,16 +242,13 @@ static void do_remote_base()
to_set, hard_zero ? " and clear gs" : "", sel);
}
void do_unexpected_base(void)
static __thread int set_thread_area_entry_number = -1;
static unsigned short load_gs(void)
{
/*
* The goal here is to try to arrange for GS == 0, GSBASE !=
* 0, and for the the kernel the think that GSBASE == 0.
*
* To make the test as reliable as possible, this uses
* explicit descriptorss. (This is not the only way. This
* could use ARCH_SET_GS with a low, nonzero base, but the
* relevant side effect of ARCH_SET_GS could change.)
* Sets GS != 0 and GSBASE != 0 but arranges for the kernel to think
* that GSBASE == 0 (i.e. thread.gsbase == 0).
*/
/* Step 1: tell the kernel that we have GSBASE == 0. */
@ -228,8 +268,9 @@ void do_unexpected_base(void)
.useable = 0
};
if (syscall(SYS_modify_ldt, 1, &desc, sizeof(desc)) == 0) {
printf("\tother thread: using LDT slot 0\n");
printf("\tusing LDT slot 0\n");
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0x7));
return 0x7;
} else {
/* No modify_ldt for us (configured out, perhaps) */
@ -239,7 +280,7 @@ void do_unexpected_base(void)
MAP_PRIVATE | MAP_ANONYMOUS | MAP_32BIT, -1, 0);
memcpy(low_desc, &desc, sizeof(desc));
low_desc->entry_number = -1;
low_desc->entry_number = set_thread_area_entry_number;
/* 32-bit set_thread_area */
long ret;
@ -251,18 +292,43 @@ void do_unexpected_base(void)
if (ret != 0) {
printf("[NOTE]\tcould not create a segment -- test won't do anything\n");
return;
return 0;
}
printf("\tother thread: using GDT slot %d\n", desc.entry_number);
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)((desc.entry_number << 3) | 0x3)));
printf("\tusing GDT slot %d\n", desc.entry_number);
set_thread_area_entry_number = desc.entry_number;
unsigned short gs = (unsigned short)((desc.entry_number << 3) | 0x3);
asm volatile ("mov %0, %%gs" : : "rm" (gs));
return gs;
}
}
/*
* Step 3: set the selector back to zero. On AMD chips, this will
* preserve GSBASE.
*/
void test_wrbase(unsigned short index, unsigned long base)
{
unsigned short newindex;
unsigned long newbase;
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
printf("[RUN]\tGS = 0x%hx, GSBASE = 0x%lx\n", index, base);
asm volatile ("mov %0, %%gs" : : "rm" (index));
wrgsbase(base);
remote_base = 0;
ftx = 1;
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
while (ftx != 0)
syscall(SYS_futex, &ftx, FUTEX_WAIT, 1, NULL, NULL, 0);
asm volatile ("mov %%gs, %0" : "=rm" (newindex));
newbase = rdgsbase();
if (newindex == index && newbase == base) {
printf("[OK]\tIndex and base were preserved\n");
} else {
printf("[FAIL]\tAfter switch, GS = 0x%hx and GSBASE = 0x%lx\n",
newindex, newbase);
nerrs++;
}
}
static void *threadproc(void *ctx)
@ -273,12 +339,19 @@ static void *threadproc(void *ctx)
if (ftx == 3)
return NULL;
if (ftx == 1)
if (ftx == 1) {
do_remote_base();
else if (ftx == 2)
do_unexpected_base();
else
} else if (ftx == 2) {
/*
* On AMD chips, this causes GSBASE != 0, GS == 0, and
* thread.gsbase == 0.
*/
load_gs();
asm volatile ("mov %0, %%gs" : : "rm" ((unsigned short)0));
} else {
errx(1, "helper thread got bad command");
}
ftx = 0;
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
@ -367,10 +440,99 @@ static void test_unexpected_base(void)
}
}
#define USER_REGS_OFFSET(r) offsetof(struct user_regs_struct, r)
static void test_ptrace_write_gsbase(void)
{
int status;
pid_t child = fork();
if (child < 0)
err(1, "fork");
if (child == 0) {
printf("[RUN]\tPTRACE_POKE(), write GSBASE from ptracer\n");
*shared_scratch = load_gs();
if (ptrace(PTRACE_TRACEME, 0, NULL, NULL) != 0)
err(1, "PTRACE_TRACEME");
raise(SIGTRAP);
_exit(0);
}
wait(&status);
if (WSTOPSIG(status) == SIGTRAP) {
unsigned long gs, base;
unsigned long gs_offset = USER_REGS_OFFSET(gs);
unsigned long base_offset = USER_REGS_OFFSET(gs_base);
gs = ptrace(PTRACE_PEEKUSER, child, gs_offset, NULL);
if (gs != *shared_scratch) {
nerrs++;
printf("[FAIL]\tGS is not prepared with nonzero\n");
goto END;
}
if (ptrace(PTRACE_POKEUSER, child, base_offset, 0xFF) != 0)
err(1, "PTRACE_POKEUSER");
gs = ptrace(PTRACE_PEEKUSER, child, gs_offset, NULL);
base = ptrace(PTRACE_PEEKUSER, child, base_offset, NULL);
/*
* In a non-FSGSBASE system, the nonzero selector will load
* GSBASE (again). But what is tested here is whether the
* selector value is changed or not by the GSBASE write in
* a ptracer.
*/
if (gs != *shared_scratch) {
nerrs++;
printf("[FAIL]\tGS changed to %lx\n", gs);
/*
* On older kernels, poking a nonzero value into the
* base would zero the selector. On newer kernels,
* this behavior has changed -- poking the base
* changes only the base and, if FSGSBASE is not
* available, this may have no effect.
*/
if (gs == 0)
printf("\tNote: this is expected behavior on older kernels.\n");
} else if (have_fsgsbase && (base != 0xFF)) {
nerrs++;
printf("[FAIL]\tGSBASE changed to %lx\n", base);
} else {
printf("[OK]\tGS remained 0x%hx%s", *shared_scratch, have_fsgsbase ? " and GSBASE changed to 0xFF" : "");
printf("\n");
}
}
END:
ptrace(PTRACE_CONT, child, NULL, NULL);
}
int main()
{
pthread_t thread;
shared_scratch = mmap(NULL, 4096, PROT_READ | PROT_WRITE,
MAP_ANONYMOUS | MAP_SHARED, -1, 0);
/* Probe FSGSBASE */
sethandler(SIGILL, sigill, 0);
if (sigsetjmp(jmpbuf, 1) == 0) {
rdfsbase();
have_fsgsbase = true;
printf("\tFSGSBASE instructions are enabled\n");
} else {
printf("\tFSGSBASE instructions are disabled\n");
}
clearhandler(SIGILL);
sethandler(SIGSEGV, sigsegv, 0);
check_gs_value(0);
@ -417,11 +579,28 @@ int main()
test_unexpected_base();
if (have_fsgsbase) {
unsigned short ss;
asm volatile ("mov %%ss, %0" : "=rm" (ss));
test_wrbase(0, 0);
test_wrbase(0, 1);
test_wrbase(0, 0x200000000);
test_wrbase(0, 0xffffffffffffffff);
test_wrbase(ss, 0);
test_wrbase(ss, 1);
test_wrbase(ss, 0x200000000);
test_wrbase(ss, 0xffffffffffffffff);
}
ftx = 3; /* Kill the thread. */
syscall(SYS_futex, &ftx, FUTEX_WAKE, 0, NULL, NULL, 0);
if (pthread_join(thread, NULL) != 0)
err(1, "pthread_join");
test_ptrace_write_gsbase();
return nerrs == 0 ? 0 : 1;
}

112
tools/testing/selftests/x86/syscall_arg_fault.c
View File

@ -15,9 +15,30 @@
#include <setjmp.h>
#include <errno.h>
#ifdef __x86_64__
# define WIDTH "q"
#else
# define WIDTH "l"
#endif
/* Our sigaltstack scratch space. */
static unsigned char altstack_data[SIGSTKSZ];
static unsigned long get_eflags(void)
{
unsigned long eflags;
asm volatile ("pushf" WIDTH "\n\tpop" WIDTH " %0" : "=rm" (eflags));
return eflags;
}
static void set_eflags(unsigned long eflags)
{
asm volatile ("push" WIDTH " %0\n\tpopf" WIDTH
: : "rm" (eflags) : "flags");
}
#define X86_EFLAGS_TF (1UL << 8)
static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *),
int flags)
{
@ -35,13 +56,22 @@ static sigjmp_buf jmpbuf;
static volatile sig_atomic_t n_errs;
#ifdef __x86_64__
#define REG_AX REG_RAX
#define REG_IP REG_RIP
#else
#define REG_AX REG_EAX
#define REG_IP REG_EIP
#endif
static void sigsegv_or_sigbus(int sig, siginfo_t *info, void *ctx_void)
{
ucontext_t *ctx = (ucontext_t*)ctx_void;
long ax = (long)ctx->uc_mcontext.gregs[REG_AX];
if (ctx->uc_mcontext.gregs[REG_EAX] != -EFAULT) {
printf("[FAIL]\tAX had the wrong value: 0x%x\n",
ctx->uc_mcontext.gregs[REG_EAX]);
if (ax != -EFAULT && ax != -ENOSYS) {
printf("[FAIL]\tAX had the wrong value: 0x%lx\n",
(unsigned long)ax);
n_errs++;
} else {
printf("[OK]\tSeems okay\n");
@ -50,9 +80,42 @@ static void sigsegv_or_sigbus(int sig, siginfo_t *info, void *ctx_void)
siglongjmp(jmpbuf, 1);
}
static volatile sig_atomic_t sigtrap_consecutive_syscalls;
static void sigtrap(int sig, siginfo_t *info, void *ctx_void)
{
/*
* KVM has some bugs that can cause us to stop making progress.
* detect them and complain, but don't infinite loop or fail the
* test.
*/
ucontext_t *ctx = (ucontext_t*)ctx_void;
unsigned short *ip = (unsigned short *)ctx->uc_mcontext.gregs[REG_IP];
if (*ip == 0x340f || *ip == 0x050f) {
/* The trap was on SYSCALL or SYSENTER */
sigtrap_consecutive_syscalls++;
if (sigtrap_consecutive_syscalls > 3) {
printf("[WARN]\tGot stuck single-stepping -- you probably have a KVM bug\n");
siglongjmp(jmpbuf, 1);
}
} else {
sigtrap_consecutive_syscalls = 0;
}
}
static void sigill(int sig, siginfo_t *info, void *ctx_void)
{
printf("[SKIP]\tIllegal instruction\n");
ucontext_t *ctx = (ucontext_t*)ctx_void;
unsigned short *ip = (unsigned short *)ctx->uc_mcontext.gregs[REG_IP];
if (*ip == 0x0b0f) {
/* one of the ud2 instructions faulted */
printf("[OK]\tSYSCALL returned normally\n");
} else {
printf("[SKIP]\tIllegal instruction\n");
}
siglongjmp(jmpbuf, 1);
}
@ -120,9 +183,48 @@ int main()
"movl $-1, %%ebp\n\t"
"movl $-1, %%esp\n\t"
"syscall\n\t"
"pushl $0" /* make sure we segfault cleanly */
"ud2" /* make sure we recover cleanly */
: : : "memory", "flags");
}
printf("[RUN]\tSYSENTER with TF and invalid state\n");
sethandler(SIGTRAP, sigtrap, SA_ONSTACK);
if (sigsetjmp(jmpbuf, 1) == 0) {
sigtrap_consecutive_syscalls = 0;
set_eflags(get_eflags() | X86_EFLAGS_TF);
asm volatile (
"movl $-1, %%eax\n\t"
"movl $-1, %%ebx\n\t"
"movl $-1, %%ecx\n\t"
"movl $-1, %%edx\n\t"
"movl $-1, %%esi\n\t"
"movl $-1, %%edi\n\t"
"movl $-1, %%ebp\n\t"
"movl $-1, %%esp\n\t"
"sysenter"
: : : "memory", "flags");
}
set_eflags(get_eflags() & ~X86_EFLAGS_TF);
printf("[RUN]\tSYSCALL with TF and invalid state\n");
if (sigsetjmp(jmpbuf, 1) == 0) {
sigtrap_consecutive_syscalls = 0;
set_eflags(get_eflags() | X86_EFLAGS_TF);
asm volatile (
"movl $-1, %%eax\n\t"
"movl $-1, %%ebx\n\t"
"movl $-1, %%ecx\n\t"
"movl $-1, %%edx\n\t"
"movl $-1, %%esi\n\t"
"movl $-1, %%edi\n\t"
"movl $-1, %%ebp\n\t"
"movl $-1, %%esp\n\t"
"syscall\n\t"
"ud2" /* make sure we recover cleanly */
: : : "memory", "flags");
}
set_eflags(get_eflags() & ~X86_EFLAGS_TF);
return 0;
}