forked from Minki/linux
MIPS: Lemote 2F: Add PCI support
PCI support for the Fuloong 2E and Lemote Loongson 2F family machines is mostly identical with the exception of CS5536 support. Rename ops-fuloong2e.c to ops-loongson2.c then add the CS5536 support to share most of the source code among Loongson machines. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Wu Zhangjin
Ralf Baechle
parent
22c21003a9
commit
1032bce3ef
@ -28,7 +28,8 @@ obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
|
||||
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
|
||||
obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o
|
||||
obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o
|
||||
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-fuloong2e.o
|
||||
obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o
|
||||
obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o
|
||||
obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o
|
||||
obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o
|
||||
obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o
|
||||
|
||||
160
arch/mips/pci/fixup-lemote2f.c
Normal file
160
arch/mips/pci/fixup-lemote2f.c
Normal file
@ -0,0 +1,160 @@
|
||||
/*
|
||||
* Copyright (C) 2008 Lemote Technology
|
||||
* Copyright (C) 2004 ICT CAS
|
||||
* Author: Li xiaoyu, lixy@ict.ac.cn
|
||||
*
|
||||
* Copyright (C) 2007 Lemote, Inc.
|
||||
* Author: Fuxin Zhang, zhangfx@lemote.com
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
#include <linux/init.h>
|
||||
#include <linux/pci.h>
|
||||
|
||||
#include <loongson.h>
|
||||
#include <cs5536/cs5536.h>
|
||||
#include <cs5536/cs5536_pci.h>
|
||||
|
||||
/* PCI interrupt pins
|
||||
*
|
||||
* These should not be changed, or you should consider loongson2f interrupt
|
||||
* register and your pci card dispatch
|
||||
*/
|
||||
|
||||
#define PCIA 4
|
||||
#define PCIB 5
|
||||
#define PCIC 6
|
||||
#define PCID 7
|
||||
|
||||
/* all the pci device has the PCIA pin, check the datasheet. */
|
||||
static char irq_tab[][5] __initdata = {
|
||||
/* INTA INTB INTC INTD */
|
||||
{0, 0, 0, 0, 0}, /* 11: Unused */
|
||||
{0, 0, 0, 0, 0}, /* 12: Unused */
|
||||
{0, 0, 0, 0, 0}, /* 13: Unused */
|
||||
{0, 0, 0, 0, 0}, /* 14: Unused */
|
||||
{0, 0, 0, 0, 0}, /* 15: Unused */
|
||||
{0, 0, 0, 0, 0}, /* 16: Unused */
|
||||
{0, PCIA, 0, 0, 0}, /* 17: RTL8110-0 */
|
||||
{0, PCIB, 0, 0, 0}, /* 18: RTL8110-1 */
|
||||
{0, PCIC, 0, 0, 0}, /* 19: SiI3114 */
|
||||
{0, PCID, 0, 0, 0}, /* 20: 3-ports nec usb */
|
||||
{0, PCIA, PCIB, PCIC, PCID}, /* 21: PCI-SLOT */
|
||||
{0, 0, 0, 0, 0}, /* 22: Unused */
|
||||
{0, 0, 0, 0, 0}, /* 23: Unused */
|
||||
{0, 0, 0, 0, 0}, /* 24: Unused */
|
||||
{0, 0, 0, 0, 0}, /* 25: Unused */
|
||||
{0, 0, 0, 0, 0}, /* 26: Unused */
|
||||
{0, 0, 0, 0, 0}, /* 27: Unused */
|
||||
};
|
||||
|
||||
int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
|
||||
{
|
||||
int virq;
|
||||
|
||||
if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536)
|
||||
&& (PCI_SLOT(dev->devfn) < 32)) {
|
||||
virq = irq_tab[slot][pin];
|
||||
printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin,
|
||||
virq + LOONGSON_IRQ_BASE);
|
||||
if (virq != 0)
|
||||
return LOONGSON_IRQ_BASE + virq;
|
||||
else
|
||||
return 0;
|
||||
} else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) { /* cs5536 */
|
||||
switch (PCI_FUNC(dev->devfn)) {
|
||||
case 2:
|
||||
pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
|
||||
CS5536_IDE_INTR);
|
||||
return CS5536_IDE_INTR; /* for IDE */
|
||||
case 3:
|
||||
pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
|
||||
CS5536_ACC_INTR);
|
||||
return CS5536_ACC_INTR; /* for AUDIO */
|
||||
case 4: /* for OHCI */
|
||||
case 5: /* for EHCI */
|
||||
case 6: /* for UDC */
|
||||
case 7: /* for OTG */
|
||||
pci_write_config_byte(dev, PCI_INTERRUPT_LINE,
|
||||
CS5536_USB_INTR);
|
||||
return CS5536_USB_INTR;
|
||||
}
|
||||
return dev->irq;
|
||||
} else {
|
||||
printk(KERN_INFO " strange pci slot number.\n");
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
/* Do platform specific device initialization at pci_enable_device() time */
|
||||
int pcibios_plat_dev_init(struct pci_dev *dev)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* CS5536 SPEC. fixup */
|
||||
static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
|
||||
{
|
||||
/* the uart1 and uart2 interrupt in PIC is enabled as default */
|
||||
pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
|
||||
pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
|
||||
}
|
||||
|
||||
static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
|
||||
{
|
||||
/* setting the mutex pin as IDE function */
|
||||
pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
|
||||
CS5536_IDE_FLASH_SIGNATURE);
|
||||
}
|
||||
|
||||
static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
|
||||
{
|
||||
/* enable the AUDIO interrupt in PIC */
|
||||
pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
|
||||
|
||||
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
|
||||
}
|
||||
|
||||
static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
|
||||
{
|
||||
/* enable the OHCI interrupt in PIC */
|
||||
/* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
|
||||
pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
|
||||
}
|
||||
|
||||
static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
|
||||
{
|
||||
u32 hi, lo;
|
||||
|
||||
/* Serial short detect enable */
|
||||
_rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo);
|
||||
_wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo);
|
||||
|
||||
/* setting the USB2.0 micro frame length */
|
||||
pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
|
||||
}
|
||||
|
||||
static void __init loongson_nec_fixup(struct pci_dev *pdev)
|
||||
{
|
||||
unsigned int val;
|
||||
|
||||
pci_read_config_dword(pdev, 0xe0, &val);
|
||||
/* Only 2 port be used */
|
||||
pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2);
|
||||
}
|
||||
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA,
|
||||
loongson_cs5536_isa_fixup);
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC,
|
||||
loongson_cs5536_ohci_fixup);
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC,
|
||||
loongson_cs5536_ehci_fixup);
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO,
|
||||
loongson_cs5536_acc_fixup);
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE,
|
||||
loongson_cs5536_ide_fixup);
|
||||
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
|
||||
loongson_nec_fixup);
|
||||
@ -20,6 +20,11 @@
|
||||
|
||||
#include <loongson.h>
|
||||
|
||||
#ifdef CONFIG_CS5536
|
||||
#include <cs5536/cs5536_pci.h>
|
||||
#include <cs5536/cs5536.h>
|
||||
#endif
|
||||
|
||||
#define PCI_ACCESS_READ 0
|
||||
#define PCI_ACCESS_WRITE 1
|
||||
|
||||
@ -43,6 +48,29 @@ static int loongson_pcibios_config_access(unsigned char access_type,
|
||||
int reg = where & ~3;
|
||||
|
||||
if (busnum == 0) {
|
||||
/* board-specific part,currently,only fuloong2f,yeeloong2f
|
||||
* use CS5536, fuloong2e use via686b, gdium has no
|
||||
* south bridge
|
||||
*/
|
||||
#ifdef CONFIG_CS5536
|
||||
/* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to
|
||||
* access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO,
|
||||
* PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it
|
||||
* will not go this branch, but the others. so, no calling dead
|
||||
* loop here.
|
||||
*/
|
||||
if ((PCI_IDSEL_CS5536 == device) && (reg < PCI_MSR_CTRL)) {
|
||||
switch (access_type) {
|
||||
case PCI_ACCESS_READ:
|
||||
*data = cs5536_pci_conf_read4(function, reg);
|
||||
break;
|
||||
case PCI_ACCESS_WRITE:
|
||||
cs5536_pci_conf_write4(function, reg, *data);
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
/* Type 0 configuration for onboard PCI bus */
|
||||
if (device > MAX_DEV_NUM)
|
||||
return -1;
|
||||
@ -152,3 +180,29 @@ struct pci_ops loongson_pci_ops = {
|
||||
.read = loongson_pcibios_read,
|
||||
.write = loongson_pcibios_write
|
||||
};
|
||||
|
||||
#ifdef CONFIG_CS5536
|
||||
void _rdmsr(u32 msr, u32 *hi, u32 *lo)
|
||||
{
|
||||
struct pci_bus bus = {
|
||||
.number = PCI_BUS_CS5536
|
||||
};
|
||||
u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
|
||||
loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
|
||||
loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
|
||||
loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
|
||||
}
|
||||
EXPORT_SYMBOL(_rdmsr);
|
||||
|
||||
void _wrmsr(u32 msr, u32 hi, u32 lo)
|
||||
{
|
||||
struct pci_bus bus = {
|
||||
.number = PCI_BUS_CS5536
|
||||
};
|
||||
u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0);
|
||||
loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr);
|
||||
loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo);
|
||||
loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi);
|
||||
}
|
||||
EXPORT_SYMBOL(_wrmsr);
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user