forked from Minki/linux
drm/omap: Merge omap_dss_device type and output_type fields
The omap_dss_device type and output_type fields differ mostly for historical reasons. The output_type field is required for all devices but the display at the end of the pipeline, and must be set to OMAP_DISPLAY_TYPE_NONE for the latter. The type field is required for all devices but the internal encoder, for which it is ignored. The only reason why the output_type field must be set to OMAP_DISPLAY_TYPE_NONE for the display at the end of the pipeline is to identify omap_dss_device instances corresponding to displays. This is not documented and confusing. Clean the code by adding a new display field to the omap_dss_device structure to identify displays, and merge the type and output_type fields. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
This commit is contained in:
parent
a4e26525ca
commit
0dbfc39667
@ -56,6 +56,7 @@ static int tvc_probe(struct platform_device *pdev)
|
||||
dssdev->ops = &tvc_ops;
|
||||
dssdev->dev = &pdev->dev;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_VENC;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
|
||||
|
@ -239,6 +239,7 @@ static int dvic_probe(struct platform_device *pdev)
|
||||
dssdev->ops = &dvic_ops;
|
||||
dssdev->dev = &pdev->dev;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_DVI;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
|
||||
|
@ -140,6 +140,7 @@ static int hdmic_probe(struct platform_device *pdev)
|
||||
dssdev->ops = &hdmic_ops;
|
||||
dssdev->dev = &pdev->dev;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
dssdev->ops_flags = ddata->hpd_gpio
|
||||
|
@ -88,7 +88,6 @@ static int opa362_probe(struct platform_device *pdev)
|
||||
dssdev->ops = &opa362_ops;
|
||||
dssdev->dev = &pdev->dev;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_VENC;
|
||||
dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(1) | BIT(0);
|
||||
|
||||
|
@ -84,7 +84,6 @@ static int tfp410_probe(struct platform_device *pdev)
|
||||
dssdev->ops = &tfp410_ops;
|
||||
dssdev->dev = &pdev->dev;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
|
||||
dssdev->output_type = OMAP_DISPLAY_TYPE_DVI;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(1) | BIT(0);
|
||||
dssdev->bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_POSEDGE
|
||||
|
@ -167,7 +167,6 @@ static int tpd_probe(struct platform_device *pdev)
|
||||
dssdev->ops = &tpd_ops;
|
||||
dssdev->dev = &pdev->dev;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
|
||||
dssdev->output_type = OMAP_DISPLAY_TYPE_HDMI;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(1) | BIT(0);
|
||||
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_DETECT
|
||||
|
@ -150,6 +150,7 @@ static int panel_dpi_probe(struct platform_device *pdev)
|
||||
dssdev->dev = &pdev->dev;
|
||||
dssdev->ops = &panel_dpi_ops;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
|
||||
|
@ -1272,6 +1272,7 @@ static int dsicm_probe(struct platform_device *pdev)
|
||||
dssdev->ops = &dsicm_ops;
|
||||
dssdev->driver = &dsicm_dss_driver;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_DSI;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
|
||||
|
@ -197,6 +197,7 @@ static int lb035q02_panel_spi_probe(struct spi_device *spi)
|
||||
dssdev->dev = &spi->dev;
|
||||
dssdev->ops = &lb035q02_ops;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
|
||||
|
@ -192,6 +192,7 @@ static int nec_8048_probe(struct spi_device *spi)
|
||||
dssdev->dev = &spi->dev;
|
||||
dssdev->ops = &nec_8048_ops;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
|
||||
|
@ -207,6 +207,7 @@ static int sharp_ls_probe(struct platform_device *pdev)
|
||||
dssdev->dev = &pdev->dev;
|
||||
dssdev->ops = &sharp_ls_ops;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
|
||||
|
@ -706,6 +706,7 @@ static int acx565akm_probe(struct spi_device *spi)
|
||||
dssdev->dev = &spi->dev;
|
||||
dssdev->ops = &acx565akm_ops;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_SDI;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
|
||||
|
@ -321,6 +321,7 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
|
||||
dssdev->dev = &spi->dev;
|
||||
dssdev->ops = &td028ttec1_ops;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
|
||||
|
@ -420,6 +420,7 @@ static int tpo_td043_probe(struct spi_device *spi)
|
||||
dssdev->dev = &spi->dev;
|
||||
dssdev->ops = &tpo_td043_ops;
|
||||
dssdev->type = OMAP_DISPLAY_TYPE_DPI;
|
||||
dssdev->display = true;
|
||||
dssdev->owner = THIS_MODULE;
|
||||
dssdev->of_ports = BIT(0);
|
||||
dssdev->ops_flags = OMAP_DSS_DEVICE_OP_MODES;
|
||||
|
@ -207,7 +207,7 @@ void omapdss_device_disconnect(struct omap_dss_device *src,
|
||||
dev_dbg(dst->dev, "disconnect\n");
|
||||
|
||||
if (!dst->id && !omapdss_device_is_connected(dst)) {
|
||||
WARN_ON(dst->output_type);
|
||||
WARN_ON(!dst->display);
|
||||
return;
|
||||
}
|
||||
|
||||
|
@ -634,7 +634,7 @@ static int dpi_init_output_port(struct dpi_data *dpi, struct device_node *port)
|
||||
|
||||
out->dev = &dpi->pdev->dev;
|
||||
out->id = OMAP_DSS_OUTPUT_DPI;
|
||||
out->output_type = OMAP_DISPLAY_TYPE_DPI;
|
||||
out->type = OMAP_DISPLAY_TYPE_DPI;
|
||||
out->dispc_channel = dpi_get_channel(dpi);
|
||||
out->of_ports = BIT(port_num);
|
||||
out->ops = &dpi_ops;
|
||||
|
@ -5121,7 +5121,7 @@ static int dsi_init_output(struct dsi_data *dsi)
|
||||
out->id = dsi->module_id == 0 ?
|
||||
OMAP_DSS_OUTPUT_DSI1 : OMAP_DSS_OUTPUT_DSI2;
|
||||
|
||||
out->output_type = OMAP_DISPLAY_TYPE_DSI;
|
||||
out->type = OMAP_DISPLAY_TYPE_DSI;
|
||||
out->name = dsi->module_id == 0 ? "dsi.0" : "dsi.1";
|
||||
out->dispc_channel = dsi_get_channel(dsi);
|
||||
out->ops = &dsi_ops;
|
||||
|
@ -679,7 +679,7 @@ static int hdmi4_init_output(struct omap_hdmi *hdmi)
|
||||
|
||||
out->dev = &hdmi->pdev->dev;
|
||||
out->id = OMAP_DSS_OUTPUT_HDMI;
|
||||
out->output_type = OMAP_DISPLAY_TYPE_HDMI;
|
||||
out->type = OMAP_DISPLAY_TYPE_HDMI;
|
||||
out->name = "hdmi.0";
|
||||
out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
|
||||
out->ops = &hdmi_ops;
|
||||
|
@ -663,7 +663,7 @@ static int hdmi5_init_output(struct omap_hdmi *hdmi)
|
||||
|
||||
out->dev = &hdmi->pdev->dev;
|
||||
out->id = OMAP_DSS_OUTPUT_HDMI;
|
||||
out->output_type = OMAP_DISPLAY_TYPE_HDMI;
|
||||
out->type = OMAP_DISPLAY_TYPE_HDMI;
|
||||
out->name = "hdmi.0";
|
||||
out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
|
||||
out->ops = &hdmi_ops;
|
||||
|
@ -413,14 +413,18 @@ struct omap_dss_device {
|
||||
|
||||
struct list_head list;
|
||||
|
||||
enum omap_display_type type;
|
||||
/*
|
||||
* DSS output type that this device generates (for DSS internal devices)
|
||||
* or requires (for external encoders). Must be OMAP_DISPLAY_TYPE_NONE
|
||||
* for display devices (connectors and panels) and to non-zero value for
|
||||
* all other devices.
|
||||
* DSS type that this device generates (for DSS internal devices) or
|
||||
* requires (for external encoders, connectors and panels). Must be a
|
||||
* non-zero (different than OMAP_DISPLAY_TYPE_NONE) value.
|
||||
*/
|
||||
enum omap_display_type output_type;
|
||||
enum omap_display_type type;
|
||||
|
||||
/*
|
||||
* True if the device is a display (panel or connector) at the end of
|
||||
* the pipeline, false otherwise.
|
||||
*/
|
||||
bool display;
|
||||
|
||||
const char *name;
|
||||
|
||||
|
@ -33,7 +33,7 @@ int omapdss_device_init_output(struct omap_dss_device *out)
|
||||
return PTR_ERR(out->next);
|
||||
}
|
||||
|
||||
if (out->next && out->output_type != out->next->type) {
|
||||
if (out->next && out->type != out->next->type) {
|
||||
dev_err(out->dev, "output type and display type don't match\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
@ -272,7 +272,7 @@ static int sdi_init_output(struct sdi_device *sdi)
|
||||
|
||||
out->dev = &sdi->pdev->dev;
|
||||
out->id = OMAP_DSS_OUTPUT_SDI;
|
||||
out->output_type = OMAP_DISPLAY_TYPE_SDI;
|
||||
out->type = OMAP_DISPLAY_TYPE_SDI;
|
||||
out->name = "sdi.0";
|
||||
out->dispc_channel = OMAP_DSS_CHANNEL_LCD;
|
||||
/* We have SDI only on OMAP3, where it's on port 1 */
|
||||
|
@ -760,7 +760,7 @@ static int venc_init_output(struct venc_device *venc)
|
||||
|
||||
out->dev = &venc->pdev->dev;
|
||||
out->id = OMAP_DSS_OUTPUT_VENC;
|
||||
out->output_type = OMAP_DISPLAY_TYPE_VENC;
|
||||
out->type = OMAP_DISPLAY_TYPE_VENC;
|
||||
out->name = "venc.0";
|
||||
out->dispc_channel = OMAP_DSS_CHANNEL_DIGIT;
|
||||
out->ops = &venc_ops;
|
||||
|
@ -128,7 +128,7 @@ static void omap_crtc_set_enabled(struct drm_crtc *crtc, bool enable)
|
||||
if (WARN_ON(omap_crtc->enabled == enable))
|
||||
return;
|
||||
|
||||
if (omap_crtc->pipe->output->output_type == OMAP_DISPLAY_TYPE_HDMI) {
|
||||
if (omap_crtc->pipe->output->type == OMAP_DISPLAY_TYPE_HDMI) {
|
||||
priv->dispc_ops->mgr_enable(priv->dispc, channel, enable);
|
||||
omap_crtc->enabled = enable;
|
||||
return;
|
||||
|
@ -138,7 +138,7 @@ static void omap_encoder_mode_set(struct drm_encoder *encoder,
|
||||
}
|
||||
|
||||
/* Set the HDMI mode and HDMI infoframe if applicable. */
|
||||
if (omap_encoder->output->output_type == OMAP_DISPLAY_TYPE_HDMI)
|
||||
if (omap_encoder->output->type == OMAP_DISPLAY_TYPE_HDMI)
|
||||
omap_encoder_hdmi_mode_set(encoder, adjusted_mode);
|
||||
}
|
||||
|
||||
@ -161,7 +161,7 @@ static void omap_encoder_disable(struct drm_encoder *encoder)
|
||||
* DSI is treated as an exception as DSI pipelines still use the legacy
|
||||
* flow where the pipeline output controls the encoder.
|
||||
*/
|
||||
if (dssdev->output_type != OMAP_DISPLAY_TYPE_DSI) {
|
||||
if (dssdev->type != OMAP_DISPLAY_TYPE_DSI) {
|
||||
dssdev->ops->disable(dssdev);
|
||||
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
|
||||
}
|
||||
@ -189,7 +189,7 @@ static void omap_encoder_enable(struct drm_encoder *encoder)
|
||||
* DSI is treated as an exception as DSI pipelines still use the legacy
|
||||
* flow where the pipeline output controls the encoder.
|
||||
*/
|
||||
if (dssdev->output_type != OMAP_DISPLAY_TYPE_DSI) {
|
||||
if (dssdev->type != OMAP_DISPLAY_TYPE_DSI) {
|
||||
dssdev->ops->enable(dssdev);
|
||||
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
|
||||
}
|
||||
|
Loading…
Reference in New Issue
Block a user