mlxsw: spectrum: Correctly report autonegotiation

Up until now the device always reported autonegotiation to be off
although it was on by default.

Allow the user to disable / enable autonegotiation and report its status
correctly.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Ido Schimmel 2016-09-12 13:26:23 +02:00 committed by David S. Miller
parent 36a19b2995
commit 0c83f88c02
2 changed files with 14 additions and 3 deletions

View File

@ -1815,7 +1815,12 @@ static int mlxsw_sp_port_get_settings(struct net_device *dev,
mlxsw_sp_from_ptys_supported_link(eth_proto_cap) |
SUPPORTED_Pause | SUPPORTED_Asym_Pause |
SUPPORTED_Autoneg;
cmd->advertising = mlxsw_sp_from_ptys_advert_link(eth_proto_admin);
if (mlxsw_sp_port->link.autoneg) {
cmd->advertising =
mlxsw_sp_from_ptys_advert_link(eth_proto_admin);
cmd->advertising |= ADVERTISED_Autoneg;
cmd->autoneg = AUTONEG_ENABLE;
}
mlxsw_sp_from_ptys_speed_duplex(netif_carrier_ok(dev),
eth_proto_oper, cmd);
@ -1873,11 +1878,13 @@ static int mlxsw_sp_port_set_settings(struct net_device *dev,
u32 eth_proto_new;
u32 eth_proto_cap;
u32 eth_proto_admin;
bool autoneg;
int err;
autoneg = cmd->autoneg == AUTONEG_ENABLE;
speed = ethtool_cmd_speed(cmd);
eth_proto_new = cmd->autoneg == AUTONEG_ENABLE ?
eth_proto_new = autoneg ?
mlxsw_sp_to_ptys_advert_link(cmd->advertising) :
mlxsw_sp_to_ptys_speed(speed);
@ -1907,6 +1914,8 @@ static int mlxsw_sp_port_set_settings(struct net_device *dev,
if (!netif_running(dev))
return 0;
mlxsw_sp_port->link.autoneg = autoneg;
err = mlxsw_sp_port_admin_status_set(mlxsw_sp_port, false);
if (err) {
netdev_err(dev, "Failed to set admin status");
@ -2082,6 +2091,7 @@ static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
mlxsw_sp_port->mapping.module = module;
mlxsw_sp_port->mapping.width = width;
mlxsw_sp_port->mapping.lane = lane;
mlxsw_sp_port->link.autoneg = 1;
bytes = DIV_ROUND_UP(VLAN_N_VID, BITS_PER_BYTE);
mlxsw_sp_port->active_vlans = kzalloc(bytes, GFP_KERNEL);
if (!mlxsw_sp_port->active_vlans) {

View File

@ -341,7 +341,8 @@ struct mlxsw_sp_port {
} vport;
struct {
u8 tx_pause:1,
rx_pause:1;
rx_pause:1,
autoneg:1;
} link;
struct {
struct ieee_ets *ets;