Merge branch 'remotes/lorenzo/pci/mediatek'

- Configure FC and FTS for functions other than 0 (Ryder Lee)

- Add missing MODULE_DEVICE_TABLE (Qiheng Lin)

- Add YAML schema for MediaTek (Jianjun Wang)

- Export pci_pio_to_address() for module use (Jianjun Wang)

- Add MediaTek MT8192 PCIe controller driver (Jianjun Wang)

- Add MediaTek MT8192 INTx support (Jianjun Wang)

- Add MediaTek MT8192 MSI support (Jianjun Wang)

- Add MediaTek MT8192 system power management support (Jianjun Wang)

* remotes/lorenzo/pci/mediatek:
  MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer
  PCI: mediatek-gen3: Add system PM support
  PCI: mediatek-gen3: Add MSI support
  PCI: mediatek-gen3: Add INTx support
  PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192
  PCI: Export pci_pio_to_address() for module use
  dt-bindings: PCI: mediatek-gen3: Add YAML schema
  PCI: mediatek: Add missing MODULE_DEVICE_TABLE
  PCI: mediatek: Configure FC and FTS for functions other than 0

Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml

@@ -0,0 +1,181 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gen3 PCIe controller on MediaTek SoCs
+
+maintainers:
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |+
+  PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed
+  and compatible with Gen2, Gen1 speed.
+
+  This PCIe controller supports up to 256 MSI vectors, the MSI hardware
+  block diagram is as follows:
+
+                    +-----+
+                    | GIC |
+                    +-----+
+                       ^
+                       |
+                   port->irq
+                       |
+               +-+-+-+-+-+-+-+-+
+               |0|1|2|3|4|5|6|7| (PCIe intc)
+               +-+-+-+-+-+-+-+-+
+                ^ ^           ^
+                | |    ...    |
+        +-------+ +------+    +-----------+
+        |                |                |
+  +-+-+---+--+--+  +-+-+---+--+--+  +-+-+---+--+--+
+  |0|1|...|30|31|  |0|1|...|30|31|  |0|1|...|30|31| (MSI sets)
+  +-+-+---+--+--+  +-+-+---+--+--+  +-+-+---+--+--+
+   ^ ^      ^  ^    ^ ^      ^  ^    ^ ^      ^  ^
+   | |      |  |    | |      |  |    | |      |  |  (MSI vectors)
+   | |      |  |    | |      |  |    | |      |  |
+
+    (MSI SET0)       (MSI SET1)  ...   (MSI SET7)
+
+  With 256 MSI vectors supported, the MSI vectors are composed of 8 sets,
+  each set has its own address for MSI message, and supports 32 MSI vectors
+  to generate interrupt.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: mediatek,mt8192-pcie
+
+  reg:
+    maxItems: 1
+
+  reg-names:
+    items:
+      - const: pcie-mac
+
+  interrupts:
+    maxItems: 1
+
+  ranges:
+    minItems: 1
+    maxItems: 8
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: phy
+      - const: mac
+
+  clocks:
+    maxItems: 6
+
+  clock-names:
+    items:
+      - const: pl_250m
+      - const: tl_26m
+      - const: tl_96m
+      - const: tl_32k
+      - const: peri_26m
+      - const: top_133m
+
+  assigned-clocks:
+    maxItems: 1
+
+  assigned-clock-parents:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller:
+    description: Interrupt controller node for handling legacy PCI interrupts.
+    type: object
+    properties:
+      '#address-cells':
+        const: 0
+      '#interrupt-cells':
+        const: 1
+      interrupt-controller: true
+
+    required:
+      - '#address-cells'
+      - '#interrupt-cells'
+      - interrupt-controller
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - ranges
+  - clocks
+  - '#interrupt-cells'
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie: pcie@11230000 {
+            compatible = "mediatek,mt8192-pcie";
+            device_type = "pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            reg = <0x00 0x11230000 0x00 0x4000>;
+            reg-names = "pcie-mac";
+            interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>;
+            bus-range = <0x00 0xff>;
+            ranges = <0x82000000 0x00 0x12000000 0x00
+                      0x12000000 0x00 0x1000000>;
+            clocks = <&infracfg 44>,
+                     <&infracfg 40>,
+                     <&infracfg 43>,
+                     <&infracfg 97>,
+                     <&infracfg 99>,
+                     <&infracfg 111>;
+            clock-names = "pl_250m", "tl_26m", "tl_96m",
+                          "tl_32k", "peri_26m", "top_133m";
+            assigned-clocks = <&topckgen 50>;
+            assigned-clock-parents = <&topckgen 91>;
+
+            phys = <&pciephy>;
+            phy-names = "pcie-phy";
+
+            resets = <&infracfg_rst 2>,
+                     <&infracfg_rst 3>;
+            reset-names = "phy", "mac";
+
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &pcie_intc 0>,
+                            <0 0 0 2 &pcie_intc 1>,
+                            <0 0 0 3 &pcie_intc 2>,
+                            <0 0 0 4 &pcie_intc 3>;
+            pcie_intc: interrupt-controller {
+                      #address-cells = <0>;
+                      #interrupt-cells = <1>;
+                      interrupt-controller;
+            };
+        };
+    };

MAINTAINERS

@@ -13919,6 +13919,7 @@ F:	drivers/pci/controller/dwc/pcie-histb.c
 
 PCIE DRIVER FOR MEDIATEK
 M:	Ryder Lee <ryder.lee@mediatek.com>
+M:	Jianjun Wang <jianjun.wang@mediatek.com>
 L:	linux-pci@vger.kernel.org
 L:	linux-mediatek@lists.infradead.org
 S:	Supported

drivers/pci/controller/Kconfig

@@ -233,6 +233,19 @@ config PCIE_MEDIATEK
 	  Say Y here if you want to enable PCIe controller support on
 	  MediaTek SoCs.
 
+config PCIE_MEDIATEK_GEN3
+	tristate "MediaTek Gen3 PCIe controller"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on PCI_MSI_IRQ_DOMAIN
+	help
+	  Adds support for PCIe Gen3 MAC controller for MediaTek SoCs.
+	  This PCIe controller is compatible with Gen3, Gen2 and Gen1 speed,
+	  and support up to 256 MSI interrupt numbers for
+	  multi-function devices.
+
+	  Say Y here if you want to enable Gen3 PCIe controller support on
+	  MediaTek SoCs.
+
 config VMD
 	depends on PCI_MSI && X86_64 && SRCU
 	tristate "Intel Volume Management Device Driver"

drivers/pci/controller/Makefile

@@ -30,6 +30,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o
 obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-rockchip-ep.o
 obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
 obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
+obj-$(CONFIG_PCIE_MEDIATEK_GEN3) += pcie-mediatek-gen3.o
 obj-$(CONFIG_PCIE_MICROCHIP_HOST) += pcie-microchip-host.o
 obj-$(CONFIG_VMD) += vmd.o
 obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o

drivers/pci/controller/pcie-mediatek.c

@@ -760,7 +760,7 @@ static struct pci_ops mtk_pcie_ops = {
 static int mtk_pcie_startup_port(struct mtk_pcie_port *port)
 {
 	struct mtk_pcie *pcie = port->pcie;
-	u32 func = PCI_FUNC(port->slot << 3);
+	u32 func = PCI_FUNC(port->slot);
 	u32 slot = PCI_SLOT(port->slot << 3);
 	u32 val;
 	int err;
@@ -1210,6 +1210,7 @@ static const struct of_device_id mtk_pcie_ids[] = {
 	{ .compatible = "mediatek,mt7629-pcie", .data = &mtk_pcie_soc_mt7629 },
 	{},
 };
+MODULE_DEVICE_TABLE(of, mtk_pcie_ids);
 
 static struct platform_driver mtk_pcie_driver = {
 	.probe = mtk_pcie_probe,

drivers/pci/pci.c

@@ -4052,6 +4052,7 @@ phys_addr_t pci_pio_to_address(unsigned long pio)
 
 	return address;
 }
+EXPORT_SYMBOL_GPL(pci_pio_to_address);
 
 unsigned long __weak pci_address_to_pio(phys_addr_t address)
 {