ARM: dts: dra72-evm-common: Correct vmmc-supply for mmc2

On dra72/dra71 evms, mmc2 vdd/ios are connected to a common 1.8V supply
not 3.3V. Also the regulator that supplies 1.8V is different on dra71-evm
so move the supply property from common dtsi to evm specific dts files.

Fixes: a4240d3af6 ("ARM: dts: Add support for dra72-evm rev C (SR2.0)")
Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
Kishon Vijay Abraham I 2017-06-07 15:07:42 +05:30 committed by Tony Lindgren
parent 45f1d5e3c7
commit 0798af5451
4 changed files with 42 additions and 2 deletions

View File

@ -32,6 +32,16 @@
3000000 0x1>;
};
evm_1v8_sw: fixedregulator-evm_1v8 {
compatible = "regulator-fixed";
regulator-name = "evm_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&lp8732_buck0_reg>;
regulator-always-on;
regulator-boot-on;
};
poweroff: gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
@ -165,6 +175,10 @@
vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
};
&mmc2 {
vmmc-supply = <&evm_1v8_sw>;
};
&mac {
mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
<&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */

View File

@ -419,8 +419,6 @@
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins_default>;
vmmc-supply = <&evm_3v3_sw>;
bus-width = <8>;
ti,non-removable;
max-frequency = <192000000>;

View File

@ -15,6 +15,16 @@
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
};
evm_1v8_sw: fixedregulator-evm_1v8 {
compatible = "regulator-fixed";
regulator-name = "evm_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&smps4_reg>;
regulator-always-on;
regulator-boot-on;
};
};
&i2c1 {
@ -82,3 +92,7 @@
interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
};
};
&mmc2 {
vmmc-supply = <&evm_1v8_sw>;
};

View File

@ -13,6 +13,16 @@
device_type = "memory";
reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
};
evm_1v8_sw: fixedregulator-evm_1v8 {
compatible = "regulator-fixed";
regulator-name = "evm_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&smps4_reg>;
regulator-always-on;
regulator-boot-on;
};
};
&i2c1 {
@ -43,3 +53,7 @@
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
&mmc2 {
vmmc-supply = <&evm_1v8_sw>;
};