mac80211/minstrel: use the new rate control API

Pass the rate selection table to mac80211 from minstrel_update_stats.
Only rates for sample attempts are set in info->control.rates, with deferred
sampling, only the second slot gets changed.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This commit is contained in:
Felix Fietkau 2013-04-22 16:14:43 +02:00 committed by Johannes Berg
parent a85666627b
commit 06d961a8e2
2 changed files with 111 additions and 91 deletions

View File

@ -83,6 +83,50 @@ minstrel_sort_best_tp_rates(struct minstrel_sta_info *mi, int i, u8 *tp_list)
tp_list[j] = i;
}
static void
minstrel_set_rate(struct minstrel_sta_info *mi, struct ieee80211_sta_rates *ratetbl,
int offset, int idx)
{
struct minstrel_rate *r = &mi->r[idx];
ratetbl->rate[offset].idx = r->rix;
ratetbl->rate[offset].count = r->adjusted_retry_count;
ratetbl->rate[offset].count_cts = r->retry_count_cts;
ratetbl->rate[offset].count_rts = r->retry_count_rtscts;
}
static void
minstrel_update_rates(struct minstrel_priv *mp, struct minstrel_sta_info *mi)
{
struct ieee80211_sta_rates *ratetbl;
int i = 0;
ratetbl = kzalloc(sizeof(*ratetbl), GFP_ATOMIC);
if (!ratetbl)
return;
/* Start with max_tp_rate */
minstrel_set_rate(mi, ratetbl, i++, mi->max_tp_rate[0]);
if (mp->hw->max_rates >= 3) {
/* At least 3 tx rates supported, use max_tp_rate2 next */
minstrel_set_rate(mi, ratetbl, i++, mi->max_tp_rate[1]);
}
if (mp->hw->max_rates >= 2) {
/* At least 2 tx rates supported, use max_prob_rate next */
minstrel_set_rate(mi, ratetbl, i++, mi->max_prob_rate);
}
/* Use lowest rate last */
ratetbl->rate[i].idx = mi->lowest_rix;
ratetbl->rate[i].count = mp->max_retry;
ratetbl->rate[i].count_cts = mp->max_retry;
ratetbl->rate[i].count_rts = mp->max_retry;
rate_control_set_rates(mp->hw, mi->sta, ratetbl);
}
static void
minstrel_update_stats(struct minstrel_priv *mp, struct minstrel_sta_info *mi)
{
@ -161,6 +205,8 @@ minstrel_update_stats(struct minstrel_priv *mp, struct minstrel_sta_info *mi)
/* Reset update timer */
mi->stats_update = jiffies;
minstrel_update_rates(mp, mi);
}
static void
@ -240,13 +286,12 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta,
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct minstrel_sta_info *mi = priv_sta;
struct minstrel_priv *mp = priv;
struct ieee80211_tx_rate *ar = info->control.rates;
unsigned int ndx, sample_ndx = 0;
struct ieee80211_tx_rate *rate = &info->control.rates[0];
struct minstrel_rate *msr, *mr;
unsigned int ndx;
bool mrr_capable;
bool indirect_rate_sampling = false;
bool rate_sampling = false;
int i, delta;
int mrr_ndx[3];
bool prev_sample = mi->prev_sample;
int delta;
int sampling_ratio;
/* management/no-ack frames do not use rate control */
@ -262,107 +307,75 @@ minstrel_get_rate(void *priv, struct ieee80211_sta *sta,
else
sampling_ratio = mp->lookaround_rate;
/* init rateindex [ndx] with max throughput rate */
ndx = mi->max_tp_rate[0];
/* increase sum packet counter */
mi->packet_count++;
delta = (mi->packet_count * sampling_ratio / 100) -
(mi->sample_count + mi->sample_deferred / 2);
/* delta > 0: sampling required */
if ((delta > 0) && (mrr_capable || !mi->prev_sample)) {
struct minstrel_rate *msr;
if (mi->packet_count >= 10000) {
mi->sample_deferred = 0;
mi->sample_count = 0;
mi->packet_count = 0;
} else if (delta > mi->n_rates * 2) {
/* With multi-rate retry, not every planned sample
* attempt actually gets used, due to the way the retry
* chain is set up - [max_tp,sample,prob,lowest] for
* sample_rate < max_tp.
*
* If there's too much sampling backlog and the link
* starts getting worse, minstrel would start bursting
* out lots of sampling frames, which would result
* in a large throughput loss. */
mi->sample_count += (delta - mi->n_rates * 2);
}
/* delta < 0: no sampling required */
mi->prev_sample = false;
if (delta < 0 || (!mrr_capable && prev_sample))
return;
/* get next random rate sample */
sample_ndx = minstrel_get_next_sample(mi);
msr = &mi->r[sample_ndx];
rate_sampling = true;
/* Decide if direct ( 1st mrr stage) or indirect (2nd mrr stage)
* rate sampling method should be used.
* Respect such rates that are not sampled for 20 interations.
*/
if (mrr_capable &&
msr->perfect_tx_time > mi->r[ndx].perfect_tx_time &&
msr->sample_skipped < 20)
indirect_rate_sampling = true;
if (!indirect_rate_sampling) {
if (msr->sample_limit != 0) {
ndx = sample_ndx;
mi->sample_count++;
if (msr->sample_limit > 0)
msr->sample_limit--;
} else
rate_sampling = false;
} else {
/* Only use IEEE80211_TX_CTL_RATE_CTRL_PROBE to mark
* packets that have the sampling rate deferred to the
* second MRR stage. Increase the sample counter only
* if the deferred sample rate was actually used.
* Use the sample_deferred counter to make sure that
* the sampling is not done in large bursts */
info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
mi->sample_deferred++;
}
if (mi->packet_count >= 10000) {
mi->sample_deferred = 0;
mi->sample_count = 0;
mi->packet_count = 0;
} else if (delta > mi->n_rates * 2) {
/* With multi-rate retry, not every planned sample
* attempt actually gets used, due to the way the retry
* chain is set up - [max_tp,sample,prob,lowest] for
* sample_rate < max_tp.
*
* If there's too much sampling backlog and the link
* starts getting worse, minstrel would start bursting
* out lots of sampling frames, which would result
* in a large throughput loss. */
mi->sample_count += (delta - mi->n_rates * 2);
}
/* get next random rate sample */
ndx = minstrel_get_next_sample(mi);
msr = &mi->r[ndx];
mr = &mi->r[mi->max_tp_rate[0]];
/* Decide if direct ( 1st mrr stage) or indirect (2nd mrr stage)
* rate sampling method should be used.
* Respect such rates that are not sampled for 20 interations.
*/
if (mrr_capable &&
msr->perfect_tx_time > mr->perfect_tx_time &&
msr->sample_skipped < 20) {
/* Only use IEEE80211_TX_CTL_RATE_CTRL_PROBE to mark
* packets that have the sampling rate deferred to the
* second MRR stage. Increase the sample counter only
* if the deferred sample rate was actually used.
* Use the sample_deferred counter to make sure that
* the sampling is not done in large bursts */
info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
rate++;
mi->sample_deferred++;
} else {
if (!msr->sample_limit != 0)
return;
mi->sample_count++;
if (msr->sample_limit > 0)
msr->sample_limit--;
}
mi->prev_sample = rate_sampling;
/* If we're not using MRR and the sampling rate already
* has a probability of >95%, we shouldn't be attempting
* to use it, as this only wastes precious airtime */
if (!mrr_capable && rate_sampling &&
if (!mrr_capable &&
(mi->r[ndx].probability > MINSTREL_FRAC(95, 100)))
ndx = mi->max_tp_rate[0];
/* mrr setup for 1st stage */
ar[0].idx = mi->r[ndx].rix;
ar[0].count = minstrel_get_retry_count(&mi->r[ndx], info);
/* non mrr setup for 2nd stage */
if (!mrr_capable) {
if (!rate_sampling)
ar[0].count = mp->max_retry;
ar[1].idx = mi->lowest_rix;
ar[1].count = mp->max_retry;
return;
}
/* mrr setup for 2nd stage */
if (rate_sampling) {
if (indirect_rate_sampling)
mrr_ndx[0] = sample_ndx;
else
mrr_ndx[0] = mi->max_tp_rate[0];
} else {
mrr_ndx[0] = mi->max_tp_rate[1];
}
mi->prev_sample = true;
/* mrr setup for 3rd & 4th stage */
mrr_ndx[1] = mi->max_prob_rate;
mrr_ndx[2] = 0;
for (i = 1; i < 4; i++) {
ar[i].idx = mi->r[mrr_ndx[i - 1]].rix;
ar[i].count = mi->r[mrr_ndx[i - 1]].adjusted_retry_count;
}
rate->idx = mi->r[ndx].rix;
rate->count = minstrel_get_retry_count(&mi->r[ndx], info);
}
@ -412,12 +425,16 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband,
unsigned int i, n = 0;
unsigned int t_slot = 9; /* FIXME: get real slot time */
mi->sta = sta;
mi->lowest_rix = rate_lowest_index(sband, sta);
ctl_rate = &sband->bitrates[mi->lowest_rix];
mi->sp_ack_dur = ieee80211_frame_duration(sband->band, 10,
ctl_rate->bitrate,
!!(ctl_rate->flags & IEEE80211_RATE_ERP_G), 1);
memset(mi->max_tp_rate, 0, sizeof(mi->max_tp_rate));
mi->max_prob_rate = 0;
for (i = 0; i < sband->n_bitrates; i++) {
struct minstrel_rate *mr = &mi->r[n];
unsigned int tx_time = 0, tx_time_cts = 0, tx_time_rtscts = 0;
@ -473,6 +490,7 @@ minstrel_rate_init(void *priv, struct ieee80211_supported_band *sband,
mi->stats_update = jiffies;
init_sample_table(mi);
minstrel_update_rates(mp, mi);
}
static void *

View File

@ -63,6 +63,8 @@ struct minstrel_rate {
};
struct minstrel_sta_info {
struct ieee80211_sta *sta;
unsigned long stats_update;
unsigned int sp_ack_dur;
unsigned int rate_avg;