leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Merge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Browse Source
This commit is contained in:
Dmitry Torokhov 2006-09-19 01:56:44 -04:00
commit 0612ec4876
2417 changed files with 59491 additions and 27087 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
.gitignore vendored
View File

@ -12,6 +12,9 @@
*.ko
*.so
*.mod.c
*.i
*.lst
*.symtypes
#
# Top-level generic files
@ -30,6 +33,11 @@ include/config
include/linux/autoconf.h
include/linux/compile.h
include/linux/version.h
include/linux/utsrelease.h
# stgit generated dirs
patches-*
# quilt's files
patches
series

12
CREDITS
View File

@ -528,11 +528,11 @@ S: Oxford
S: United Kingdom
N: Luiz Fernando N. Capitulino
E: lcapitulino@terra.com.br
E: lcapitulino@prefeitura.sp.gov.br
W: http://www.telecentros.sp.gov.br
D: Little fixes and a lot of janitorial work
S: E-GOV Telecentros SP
E: lcapitulino@mandriva.com.br
E: lcapitulino@gmail.com
W: http://www.cpu.eti.br
D: misc kernel hacking
S: Mandriva
S: Brazil
N: Remy Card
@ -2209,7 +2209,7 @@ S: (address available on request)
S: USA
N: Ian McDonald
E: iam4@cs.waikato.ac.nz
E: ian.mcdonald@jandi.co.nz
E: imcdnzl@gmail.com
W: http://wand.net.nz/~iam4
W: http://imcdnzl.blogspot.com

8
Documentation/DMA-mapping.txt
View File

@ -698,12 +698,12 @@ these interfaces. Remember that, as defined, consistent mappings are
always going to be SAC addressable.
The first thing your driver needs to do is query the PCI platform
layer with your devices DAC addressing capabilities:
layer if it is capable of handling your devices DAC addressing
capabilities:
int pci_dac_set_dma_mask(struct pci_dev *pdev, u64 mask);
int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
This routine behaves identically to pci_set_dma_mask. You may not
use the following interfaces if this routine fails.
You may not use the following interfaces if this routine fails.
Next, DMA addresses using this API are kept track of using the
dma64_addr_t type. It is guaranteed to be big enough to hold any

9
Documentation/DocBook/kernel-api.tmpl
View File

@ -58,6 +58,9 @@
!Iinclude/linux/ktime.h
!Iinclude/linux/hrtimer.h
!Ekernel/hrtimer.c
</sect1>
<sect1><title>Workqueues and Kevents</title>
!Ekernel/workqueue.c
</sect1>
<sect1><title>Internal Functions</title>
!Ikernel/exit.c
@ -300,7 +303,7 @@ X!Ekernel/module.c
</sect1>
<sect1><title>Resources Management</title>
!Ekernel/resource.c
!Ikernel/resource.c
</sect1>
<sect1><title>MTRR Handling</title>
@ -312,9 +315,7 @@ X!Ekernel/module.c
!Edrivers/pci/pci-driver.c
!Edrivers/pci/remove.c
!Edrivers/pci/pci-acpi.c
<!-- kerneldoc does not understand __devinit
X!Edrivers/pci/search.c
-->
!Edrivers/pci/search.c
!Edrivers/pci/msi.c
!Edrivers/pci/bus.c
<!-- FIXME: Removed for now since no structured comments in source

5
Documentation/RCU/whatisRCU.txt
View File

@ -687,8 +687,9 @@ diff shows how closely related RCU and reader-writer locking can be.
+ spin_lock(&listmutex);
list_for_each_entry(p, head, lp) {
if (p->key == key) {
list_del(&p->list);
- list_del(&p->list);
- write_unlock(&listmutex);
+ list_del_rcu(&p->list);
+ spin_unlock(&listmutex);
+ synchronize_rcu();
kfree(p);
@ -736,7 +737,7 @@ Or, for those who prefer a side-by-side listing:
5 write_lock(&listmutex); 5 spin_lock(&listmutex);
6 list_for_each_entry(p, head, lp) { 6 list_for_each_entry(p, head, lp) {
7 if (p->key == key) { 7 if (p->key == key) {
8 list_del(&p->list); 8 list_del(&p->list);
8 list_del(&p->list); 8 list_del_rcu(&p->list);
9 write_unlock(&listmutex); 9 spin_unlock(&listmutex);
10 synchronize_rcu();
10 kfree(p); 11 kfree(p);

76
Documentation/SubmitChecklist
View File

@ -1,57 +1,63 @@
Linux Kernel patch sumbittal checklist
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Here are some basic things that developers should do if they
want to see their kernel patch submittals accepted quicker.
Here are some basic things that developers should do if they want to see their
kernel patch submissions accepted more quickly.
These are all above and beyond the documentation that is provided
in Documentation/SubmittingPatches and elsewhere about submitting
Linux kernel patches.
These are all above and beyond the documentation that is provided in
Documentation/SubmittingPatches and elsewhere regarding submitting Linux
kernel patches.
- Builds cleanly with applicable or modified CONFIG options =y, =m, and =n.
No gcc warnings/errors, no linker warnings/errors.
1: Builds cleanly with applicable or modified CONFIG options =y, =m, and
=n. No gcc warnings/errors, no linker warnings/errors.
- Passes allnoconfig, allmodconfig
2: Passes allnoconfig, allmodconfig
- Builds on multiple CPU arch-es by using local cross-compile tools
or something like PLM at OSDL.
3: Builds on multiple CPU architectures by using local cross-compile tools
or something like PLM at OSDL.
- ppc64 is a good architecture for cross-compilation checking because it
tends to use `unsigned long' for 64-bit quantities.
4: ppc64 is a good architecture for cross-compilation checking because it
tends to use `unsigned long' for 64-bit quantities.
- Matches kernel coding style(!)
5: Matches kernel coding style(!)
- Any new or modified CONFIG options don't muck up the config menu.
6: Any new or modified CONFIG options don't muck up the config menu.
- All new Kconfig options have help text.
7: All new Kconfig options have help text.
- Has been carefully reviewed with respect to relevant Kconfig
combinations. This is very hard to get right with testing --
brainpower pays off here.
8: Has been carefully reviewed with respect to relevant Kconfig
combinations. This is very hard to get right with testing -- brainpower
pays off here.
- Check cleanly with sparse.
9: Check cleanly with sparse.
- Use 'make checkstack' and 'make namespacecheck' and fix any
problems that they find. Note: checkstack does not point out
problems explicitly, but any one function that uses more than
512 bytes on the stack is a candidate for change.
10: Use 'make checkstack' and 'make namespacecheck' and fix any problems
that they find. Note: checkstack does not point out problems explicitly,
but any one function that uses more than 512 bytes on the stack is a
candidate for change.
- Include kernel-doc to document global kernel APIs. (Not required
for static functions, but OK there also.) Use 'make htmldocs'
or 'make mandocs' to check the kernel-doc and fix any issues.
11: Include kernel-doc to document global kernel APIs. (Not required for
static functions, but OK there also.) Use 'make htmldocs' or 'make
mandocs' to check the kernel-doc and fix any issues.
- Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP all simultaneously
enabled.
12: Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP all simultaneously
enabled.
- Has been build- and runtime tested with and without CONFIG_SMP and
CONFIG_PREEMPT.
13: Has been build- and runtime tested with and without CONFIG_SMP and
CONFIG_PREEMPT.
- If the patch affects IO/Disk, etc: has been tested with and without
CONFIG_LBD.
14: If the patch affects IO/Disk, etc: has been tested with and without
CONFIG_LBD.
15: All codepaths have been exercised with all lockdep features enabled.
2006-APR-27
16: All new /proc entries are documented under Documentation/
17: All new kernel boot parameters are documented in
Documentation/kernel-parameters.txt.
18: All new module parameters are documented with MODULE_PARM_DESC()

12
Documentation/SubmittingPatches
View File

@ -10,7 +10,9 @@ kernel, the process can sometimes be daunting if you're not familiar
with "the system." This text is a collection of suggestions which
can greatly increase the chances of your change being accepted.
If you are submitting a driver, also read Documentation/SubmittingDrivers.
Read Documentation/SubmitChecklist for a list of items to check
before submitting code. If you are submitting a driver, also read
Documentation/SubmittingDrivers.
@ -74,9 +76,6 @@ There are a number of scripts which can aid in this:
Quilt:
http://savannah.nongnu.org/projects/quilt
Randy Dunlap's patch scripts:
http://www.xenotime.net/linux/scripts/patching-scripts-002.tar.gz
Andrew Morton's patch scripts:
http://www.zip.com.au/~akpm/linux/patches/
Instead of these scripts, quilt is the recommended patch management
@ -309,6 +308,8 @@ then you just add a line saying
Signed-off-by: Random J Developer <random@developer.example.org>
using your real name (sorry, no pseudonyms or anonymous contributions.)
Some people also put extra tags at the end. They'll just be ignored for
now, but you can do this to mark internal company procedures or just
point out some special detail about the sign-off.
@ -484,7 +485,7 @@ Greg Kroah-Hartman "How to piss off a kernel subsystem maintainer".
<http://www.kroah.com/log/2005/10/19/>
<http://www.kroah.com/log/2006/01/11/>
NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!.
NO!!!! No more huge patch bombs to linux-kernel@vger.kernel.org people!
<http://marc.theaimsgroup.com/?l=linux-kernel&m=112112749912944&w=2>
Kernel Documentation/CodingStyle
@ -493,4 +494,3 @@ Kernel Documentation/CodingStyle
Linus Torvald's mail on the canonical patch format:
<http://lkml.org/lkml/2005/4/7/183>
--
Last updated on 17 Nov 2005.

112
Documentation/accounting/delay-accounting.txt Normal file
View File

@ -0,0 +1,112 @@
Delay accounting
----------------
Tasks encounter delays in execution when they wait
for some kernel resource to become available e.g. a
runnable task may wait for a free CPU to run on.
The per-task delay accounting functionality measures
the delays experienced by a task while
a) waiting for a CPU (while being runnable)
b) completion of synchronous block I/O initiated by the task
c) swapping in pages
and makes these statistics available to userspace through
the taskstats interface.
Such delays provide feedback for setting a task's cpu priority,
io priority and rss limit values appropriately. Long delays for
important tasks could be a trigger for raising its corresponding priority.
The functionality, through its use of the taskstats interface, also provides
delay statistics aggregated for all tasks (or threads) belonging to a
thread group (corresponding to a traditional Unix process). This is a commonly
needed aggregation that is more efficiently done by the kernel.
Userspace utilities, particularly resource management applications, can also
aggregate delay statistics into arbitrary groups. To enable this, delay
statistics of a task are available both during its lifetime as well as on its
exit, ensuring continuous and complete monitoring can be done.
Interface
---------
Delay accounting uses the taskstats interface which is described
in detail in a separate document in this directory. Taskstats returns a
generic data structure to userspace corresponding to per-pid and per-tgid
statistics. The delay accounting functionality populates specific fields of
this structure. See
include/linux/taskstats.h
for a description of the fields pertaining to delay accounting.
It will generally be in the form of counters returning the cumulative
delay seen for cpu, sync block I/O, swapin etc.
Taking the difference of two successive readings of a given
counter (say cpu_delay_total) for a task will give the delay
experienced by the task waiting for the corresponding resource
in that interval.
When a task exits, records containing the per-task statistics
are sent to userspace without requiring a command. If it is the last exiting
task of a thread group, the per-tgid statistics are also sent. More details
are given in the taskstats interface description.
The getdelays.c userspace utility in this directory allows simple commands to
be run and the corresponding delay statistics to be displayed. It also serves
as an example of using the taskstats interface.
Usage
-----
Compile the kernel with
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASKSTATS=y
Delay accounting is enabled by default at boot up.
To disable, add
nodelayacct
to the kernel boot options. The rest of the instructions
below assume this has not been done.
After the system has booted up, use a utility
similar to getdelays.c to access the delays
seen by a given task or a task group (tgid).
The utility also allows a given command to be
executed and the corresponding delays to be
seen.
General format of the getdelays command
getdelays [-t tgid] [-p pid] [-c cmd...]
Get delays, since system boot, for pid 10
# ./getdelays -p 10
(output similar to next case)
Get sum of delays, since system boot, for all pids with tgid 5
# ./getdelays -t 5
CPU count real total virtual total delay total
7876 92005750 100000000 24001500
IO count delay total
0 0
MEM count delay total
0 0
Get delays seen in executing a given simple command
# ./getdelays -c ls /
bin data1 data3 data5 dev home media opt root srv sys usr
boot data2 data4 data6 etc lib mnt proc sbin subdomain tmp var
CPU count real total virtual total delay total
6 4000250 4000000 0
IO count delay total
0 0
MEM count delay total
0 0

396
Documentation/accounting/getdelays.c Normal file
View File

@ -0,0 +1,396 @@
/* getdelays.c
*
* Utility to get per-pid and per-tgid delay accounting statistics
* Also illustrates usage of the taskstats interface
*
* Copyright (C) Shailabh Nagar, IBM Corp. 2005
* Copyright (C) Balbir Singh, IBM Corp. 2006
* Copyright (c) Jay Lan, SGI. 2006
*
*/
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <unistd.h>
#include <poll.h>
#include <string.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/socket.h>
#include <sys/types.h>
#include <signal.h>
#include <linux/genetlink.h>
#include <linux/taskstats.h>
/*
* Generic macros for dealing with netlink sockets. Might be duplicated
* elsewhere. It is recommended that commercial grade applications use
* libnl or libnetlink and use the interfaces provided by the library
*/
#define GENLMSG_DATA(glh) ((void *)(NLMSG_DATA(glh) + GENL_HDRLEN))
#define GENLMSG_PAYLOAD(glh) (NLMSG_PAYLOAD(glh, 0) - GENL_HDRLEN)
#define NLA_DATA(na) ((void *)((char*)(na) + NLA_HDRLEN))
#define NLA_PAYLOAD(len) (len - NLA_HDRLEN)
#define err(code, fmt, arg...) do { printf(fmt, ##arg); exit(code); } while (0)
int done = 0;
int rcvbufsz=0;
char name[100];
int dbg=0, print_delays=0;
__u64 stime, utime;
#define PRINTF(fmt, arg...) { \
if (dbg) { \
printf(fmt, ##arg); \
} \
}
/* Maximum size of response requested or message sent */
#define MAX_MSG_SIZE 256
/* Maximum number of cpus expected to be specified in a cpumask */
#define MAX_CPUS 32
/* Maximum length of pathname to log file */
#define MAX_FILENAME 256
struct msgtemplate {
struct nlmsghdr n;
struct genlmsghdr g;
char buf[MAX_MSG_SIZE];
};
char cpumask[100+6*MAX_CPUS];
/*
* Create a raw netlink socket and bind
*/
static int create_nl_socket(int protocol)
{
int fd;
struct sockaddr_nl local;
fd = socket(AF_NETLINK, SOCK_RAW, protocol);
if (fd < 0)
return -1;
if (rcvbufsz)
if (setsockopt(fd, SOL_SOCKET, SO_RCVBUF,
&rcvbufsz, sizeof(rcvbufsz)) < 0) {
printf("Unable to set socket rcv buf size to %d\n",
rcvbufsz);
return -1;
}
memset(&local, 0, sizeof(local));
local.nl_family = AF_NETLINK;
if (bind(fd, (struct sockaddr *) &local, sizeof(local)) < 0)
goto error;
return fd;
error:
close(fd);
return -1;
}
int send_cmd(int sd, __u16 nlmsg_type, __u32 nlmsg_pid,
__u8 genl_cmd, __u16 nla_type,
void *nla_data, int nla_len)
{
struct nlattr *na;
struct sockaddr_nl nladdr;
int r, buflen;
char *buf;
struct msgtemplate msg;
msg.n.nlmsg_len = NLMSG_LENGTH(GENL_HDRLEN);
msg.n.nlmsg_type = nlmsg_type;
msg.n.nlmsg_flags = NLM_F_REQUEST;
msg.n.nlmsg_seq = 0;
msg.n.nlmsg_pid = nlmsg_pid;
msg.g.cmd = genl_cmd;
msg.g.version = 0x1;
na = (struct nlattr *) GENLMSG_DATA(&msg);
na->nla_type = nla_type;
na->nla_len = nla_len + 1 + NLA_HDRLEN;
memcpy(NLA_DATA(na), nla_data, nla_len);
msg.n.nlmsg_len += NLMSG_ALIGN(na->nla_len);
buf = (char *) &msg;
buflen = msg.n.nlmsg_len ;
memset(&nladdr, 0, sizeof(nladdr));
nladdr.nl_family = AF_NETLINK;
while ((r = sendto(sd, buf, buflen, 0, (struct sockaddr *) &nladdr,
sizeof(nladdr))) < buflen) {
if (r > 0) {
buf += r;
buflen -= r;
} else if (errno != EAGAIN)
return -1;
}
return 0;
}
/*
* Probe the controller in genetlink to find the family id
* for the TASKSTATS family
*/
int get_family_id(int sd)
{
struct {
struct nlmsghdr n;
struct genlmsghdr g;
char buf[256];
} ans;
int id, rc;
struct nlattr *na;
int rep_len;
strcpy(name, TASKSTATS_GENL_NAME);
rc = send_cmd(sd, GENL_ID_CTRL, getpid(), CTRL_CMD_GETFAMILY,
CTRL_ATTR_FAMILY_NAME, (void *)name,
strlen(TASKSTATS_GENL_NAME)+1);
rep_len = recv(sd, &ans, sizeof(ans), 0);
if (ans.n.nlmsg_type == NLMSG_ERROR ||
(rep_len < 0) || !NLMSG_OK((&ans.n), rep_len))
return 0;
na = (struct nlattr *) GENLMSG_DATA(&ans);
na = (struct nlattr *) ((char *) na + NLA_ALIGN(na->nla_len));
if (na->nla_type == CTRL_ATTR_FAMILY_ID) {
id = *(__u16 *) NLA_DATA(na);
}
return id;
}
void print_delayacct(struct taskstats *t)
{
printf("\n\nCPU %15s%15s%15s%15s\n"
" %15llu%15llu%15llu%15llu\n"
"IO %15s%15s\n"
" %15llu%15llu\n"
"MEM %15s%15s\n"
" %15llu%15llu\n\n",
"count", "real total", "virtual total", "delay total",
t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
t->cpu_delay_total,
"count", "delay total",
t->blkio_count, t->blkio_delay_total,
"count", "delay total", t->swapin_count, t->swapin_delay_total);
}
int main(int argc, char *argv[])
{
int c, rc, rep_len, aggr_len, len2, cmd_type;
__u16 id;
__u32 mypid;
struct nlattr *na;
int nl_sd = -1;
int len = 0;
pid_t tid = 0;
pid_t rtid = 0;
int fd = 0;
int count = 0;
int write_file = 0;
int maskset = 0;
char logfile[128];
int loop = 0;
struct msgtemplate msg;
while (1) {
c = getopt(argc, argv, "dw:r:m:t:p:v:l");
if (c < 0)
break;
switch (c) {
case 'd':
printf("print delayacct stats ON\n");
print_delays = 1;
break;
case 'w':
strncpy(logfile, optarg, MAX_FILENAME);
printf("write to file %s\n", logfile);
write_file = 1;
break;
case 'r':
rcvbufsz = atoi(optarg);
printf("receive buf size %d\n", rcvbufsz);
if (rcvbufsz < 0)
err(1, "Invalid rcv buf size\n");
break;
case 'm':
strncpy(cpumask, optarg, sizeof(cpumask));
maskset = 1;
printf("cpumask %s maskset %d\n", cpumask, maskset);
break;
case 't':
tid = atoi(optarg);
if (!tid)
err(1, "Invalid tgid\n");
cmd_type = TASKSTATS_CMD_ATTR_TGID;
print_delays = 1;
break;
case 'p':
tid = atoi(optarg);
if (!tid)
err(1, "Invalid pid\n");
cmd_type = TASKSTATS_CMD_ATTR_PID;
print_delays = 1;
break;
case 'v':
printf("debug on\n");
dbg = 1;
break;
case 'l':
printf("listen forever\n");
loop = 1;
break;
default:
printf("Unknown option %d\n", c);
exit(-1);
}
}
if (write_file) {
fd = open(logfile, O_WRONLY | O_CREAT | O_TRUNC,
S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
if (fd == -1) {
perror("Cannot open output file\n");
exit(1);
}
}
if ((nl_sd = create_nl_socket(NETLINK_GENERIC)) < 0)
err(1, "error creating Netlink socket\n");
mypid = getpid();
id = get_family_id(nl_sd);
if (!id) {
printf("Error getting family id, errno %d", errno);
goto err;
}
PRINTF("family id %d\n", id);
if (maskset) {
rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
&cpumask, sizeof(cpumask));
PRINTF("Sent register cpumask, retval %d\n", rc);
if (rc < 0) {
printf("error sending register cpumask\n");
goto err;
}
}
if (tid) {
rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
cmd_type, &tid, sizeof(__u32));
PRINTF("Sent pid/tgid, retval %d\n", rc);
if (rc < 0) {
printf("error sending tid/tgid cmd\n");
goto done;
}
}
do {
int i;
rep_len = recv(nl_sd, &msg, sizeof(msg), 0);
PRINTF("received %d bytes\n", rep_len);
if (rep_len < 0) {
printf("nonfatal reply error: errno %d\n", errno);
continue;
}
if (msg.n.nlmsg_type == NLMSG_ERROR ||
!NLMSG_OK((&msg.n), rep_len)) {
printf("fatal reply error, errno %d\n", errno);
goto done;
}
PRINTF("nlmsghdr size=%d, nlmsg_len=%d, rep_len=%d\n",
sizeof(struct nlmsghdr), msg.n.nlmsg_len, rep_len);
rep_len = GENLMSG_PAYLOAD(&msg.n);
na = (struct nlattr *) GENLMSG_DATA(&msg);
len = 0;
i = 0;
while (len < rep_len) {
len += NLA_ALIGN(na->nla_len);
switch (na->nla_type) {
case TASKSTATS_TYPE_AGGR_TGID:
/* Fall through */
case TASKSTATS_TYPE_AGGR_PID:
aggr_len = NLA_PAYLOAD(na->nla_len);
len2 = 0;
/* For nested attributes, na follows */
na = (struct nlattr *) NLA_DATA(na);
done = 0;
while (len2 < aggr_len) {
switch (na->nla_type) {
case TASKSTATS_TYPE_PID:
rtid = *(int *) NLA_DATA(na);
if (print_delays)
printf("PID\t%d\n", rtid);
break;
case TASKSTATS_TYPE_TGID:
rtid = *(int *) NLA_DATA(na);
if (print_delays)
printf("TGID\t%d\n", rtid);
break;
case TASKSTATS_TYPE_STATS:
count++;
if (print_delays)
print_delayacct((struct taskstats *) NLA_DATA(na));
if (fd) {
if (write(fd, NLA_DATA(na), na->nla_len) < 0) {
err(1,"write error\n");
}
}
if (!loop)
goto done;
break;
default:
printf("Unknown nested nla_type %d\n", na->nla_type);
break;
}
len2 += NLA_ALIGN(na->nla_len);
na = (struct nlattr *) ((char *) na + len2);
}
break;
default:
printf("Unknown nla_type %d\n", na->nla_type);
break;
}
na = (struct nlattr *) (GENLMSG_DATA(&msg) + len);
}
} while (loop);
done:
if (maskset) {
rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
&cpumask, sizeof(cpumask));
printf("Sent deregister mask, retval %d\n", rc);
if (rc < 0)
err(rc, "error sending deregister cpumask\n");
}
err:
close(nl_sd);
if (fd)
close(fd);
return 0;
}

181
Documentation/accounting/taskstats.txt Normal file
View File

@ -0,0 +1,181 @@
Per-task statistics interface
-----------------------------
Taskstats is a netlink-based interface for sending per-task and
per-process statistics from the kernel to userspace.
Taskstats was designed for the following benefits:
- efficiently provide statistics during lifetime of a task and on its exit
- unified interface for multiple accounting subsystems
- extensibility for use by future accounting patches
Terminology
-----------
"pid", "tid" and "task" are used interchangeably and refer to the standard
Linux task defined by struct task_struct. per-pid stats are the same as
per-task stats.
"tgid", "process" and "thread group" are used interchangeably and refer to the
tasks that share an mm_struct i.e. the traditional Unix process. Despite the
use of tgid, there is no special treatment for the task that is thread group
leader - a process is deemed alive as long as it has any task belonging to it.
Usage
-----
To get statistics during a task's lifetime, userspace opens a unicast netlink
socket (NETLINK_GENERIC family) and sends commands specifying a pid or a tgid.
The response contains statistics for a task (if pid is specified) or the sum of
statistics for all tasks of the process (if tgid is specified).
To obtain statistics for tasks which are exiting, the userspace listener
sends a register command and specifies a cpumask. Whenever a task exits on
one of the cpus in the cpumask, its per-pid statistics are sent to the
registered listener. Using cpumasks allows the data received by one listener
to be limited and assists in flow control over the netlink interface and is
explained in more detail below.
If the exiting task is the last thread exiting its thread group,
an additional record containing the per-tgid stats is also sent to userspace.
The latter contains the sum of per-pid stats for all threads in the thread
group, both past and present.
getdelays.c is a simple utility demonstrating usage of the taskstats interface
for reporting delay accounting statistics. Users can register cpumasks,
send commands and process responses, listen for per-tid/tgid exit data,
write the data received to a file and do basic flow control by increasing
receive buffer sizes.
Interface
---------
The user-kernel interface is encapsulated in include/linux/taskstats.h
To avoid this documentation becoming obsolete as the interface evolves, only
an outline of the current version is given. taskstats.h always overrides the
description here.
struct taskstats is the common accounting structure for both per-pid and
per-tgid data. It is versioned and can be extended by each accounting subsystem
that is added to the kernel. The fields and their semantics are defined in the
taskstats.h file.
The data exchanged between user and kernel space is a netlink message belonging
to the NETLINK_GENERIC family and using the netlink attributes interface.
The messages are in the format
+----------+- - -+-------------+-------------------+
| nlmsghdr | Pad | genlmsghdr | taskstats payload |
+----------+- - -+-------------+-------------------+
The taskstats payload is one of the following three kinds:
1. Commands: Sent from user to kernel. Commands to get data on
a pid/tgid consist of one attribute, of type TASKSTATS_CMD_ATTR_PID/TGID,
containing a u32 pid or tgid in the attribute payload. The pid/tgid denotes
the task/process for which userspace wants statistics.
Commands to register/deregister interest in exit data from a set of cpus
consist of one attribute, of type
TASKSTATS_CMD_ATTR_REGISTER/DEREGISTER_CPUMASK and contain a cpumask in the
attribute payload. The cpumask is specified as an ascii string of
comma-separated cpu ranges e.g. to listen to exit data from cpus 1,2,3,5,7,8
the cpumask would be "1-3,5,7-8". If userspace forgets to deregister interest
in cpus before closing the listening socket, the kernel cleans up its interest
set over time. However, for the sake of efficiency, an explicit deregistration
is advisable.
2. Response for a command: sent from the kernel in response to a userspace
command. The payload is a series of three attributes of type:
a) TASKSTATS_TYPE_AGGR_PID/TGID : attribute containing no payload but indicates
a pid/tgid will be followed by some stats.
b) TASKSTATS_TYPE_PID/TGID: attribute whose payload is the pid/tgid whose stats
is being returned.
c) TASKSTATS_TYPE_STATS: attribute with a struct taskstsats as payload. The
same structure is used for both per-pid and per-tgid stats.
3. New message sent by kernel whenever a task exits. The payload consists of a
series of attributes of the following type:
a) TASKSTATS_TYPE_AGGR_PID: indicates next two attributes will be pid+stats
b) TASKSTATS_TYPE_PID: contains exiting task's pid
c) TASKSTATS_TYPE_STATS: contains the exiting task's per-pid stats
d) TASKSTATS_TYPE_AGGR_TGID: indicates next two attributes will be tgid+stats
e) TASKSTATS_TYPE_TGID: contains tgid of process to which task belongs
f) TASKSTATS_TYPE_STATS: contains the per-tgid stats for exiting task's process
per-tgid stats
--------------
Taskstats provides per-process stats, in addition to per-task stats, since
resource management is often done at a process granularity and aggregating task
stats in userspace alone is inefficient and potentially inaccurate (due to lack
of atomicity).
However, maintaining per-process, in addition to per-task stats, within the
kernel has space and time overheads. To address this, the taskstats code
accumalates each exiting task's statistics into a process-wide data structure.
When the last task of a process exits, the process level data accumalated also
gets sent to userspace (along with the per-task data).
When a user queries to get per-tgid data, the sum of all other live threads in
the group is added up and added to the accumalated total for previously exited
threads of the same thread group.
Extending taskstats
-------------------
There are two ways to extend the taskstats interface to export more
per-task/process stats as patches to collect them get added to the kernel
in future:
1. Adding more fields to the end of the existing struct taskstats. Backward
compatibility is ensured by the version number within the
structure. Userspace will use only the fields of the struct that correspond
to the version its using.
2. Defining separate statistic structs and using the netlink attributes
interface to return them. Since userspace processes each netlink attribute
independently, it can always ignore attributes whose type it does not
understand (because it is using an older version of the interface).
Choosing between 1. and 2. is a matter of trading off flexibility and
overhead. If only a few fields need to be added, then 1. is the preferable
path since the kernel and userspace don't need to incur the overhead of
processing new netlink attributes. But if the new fields expand the existing
struct too much, requiring disparate userspace accounting utilities to
unnecessarily receive large structures whose fields are of no interest, then
extending the attributes structure would be worthwhile.
Flow control for taskstats
--------------------------
When the rate of task exits becomes large, a listener may not be able to keep
up with the kernel's rate of sending per-tid/tgid exit data leading to data
loss. This possibility gets compounded when the taskstats structure gets
extended and the number of cpus grows large.
To avoid losing statistics, userspace should do one or more of the following:
- increase the receive buffer sizes for the netlink sockets opened by
listeners to receive exit data.
- create more listeners and reduce the number of cpus being listened to by
each listener. In the extreme case, there could be one listener for each cpu.
Users may also consider setting the cpu affinity of the listener to the subset
of cpus to which it listens, especially if they are listening to just one cpu.
Despite these measures, if the userspace receives ENOBUFS error messages
indicated overflow of receive buffers, it should take measures to handle the
loss of data.
----

1
Documentation/cciss.txt
View File

@ -20,6 +20,7 @@ This driver is known to work with the following cards:
* SA P400i
* SA E200
* SA E200i
* SA E500
If nodes are not already created in the /dev/cciss directory, run as root:

206
Documentation/connector/ucon.c Normal file
View File

@ -0,0 +1,206 @@
/*
* ucon.c
*
* Copyright (c) 2004+ Evgeniy Polyakov <johnpol@2ka.mipt.ru>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <asm/types.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <sys/poll.h>
#include <linux/netlink.h>
#include <linux/rtnetlink.h>
#include <arpa/inet.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <errno.h>
#include <time.h>
#include <linux/connector.h>
#define DEBUG
#define NETLINK_CONNECTOR 11
#ifdef DEBUG
#define ulog(f, a...) fprintf(stdout, f, ##a)
#else
#define ulog(f, a...) do {} while (0)
#endif
static int need_exit;
static __u32 seq;
static int netlink_send(int s, struct cn_msg *msg)
{
struct nlmsghdr *nlh;
unsigned int size;
int err;
char buf[128];
struct cn_msg *m;
size = NLMSG_SPACE(sizeof(struct cn_msg) + msg->len);
nlh = (struct nlmsghdr *)buf;
nlh->nlmsg_seq = seq++;
nlh->nlmsg_pid = getpid();
nlh->nlmsg_type = NLMSG_DONE;
nlh->nlmsg_len = NLMSG_LENGTH(size - sizeof(*nlh));
nlh->nlmsg_flags = 0;
m = NLMSG_DATA(nlh);
#if 0
ulog("%s: [%08x.%08x] len=%u, seq=%u, ack=%u.\n",
__func__, msg->id.idx, msg->id.val, msg->len, msg->seq, msg->ack);
#endif
memcpy(m, msg, sizeof(*m) + msg->len);
err = send(s, nlh, size, 0);
if (err == -1)
ulog("Failed to send: %s [%d].\n",
strerror(errno), errno);
return err;
}
int main(int argc, char *argv[])
{
int s;
char buf[1024];
int len;
struct nlmsghdr *reply;
struct sockaddr_nl l_local;
struct cn_msg *data;
FILE *out;
time_t tm;
struct pollfd pfd;
if (argc < 2)
out = stdout;
else {
out = fopen(argv[1], "a+");
if (!out) {
ulog("Unable to open %s for writing: %s\n",
argv[1], strerror(errno));
out = stdout;
}
}
memset(buf, 0, sizeof(buf));
s = socket(PF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
if (s == -1) {
perror("socket");
return -1;
}
l_local.nl_family = AF_NETLINK;
l_local.nl_groups = 0x123; /* bitmask of requested groups */
l_local.nl_pid = 0;
if (bind(s, (struct sockaddr *)&l_local, sizeof(struct sockaddr_nl)) == -1) {
perror("bind");
close(s);
return -1;
}
#if 0
{
int on = 0x57; /* Additional group number */
setsockopt(s, SOL_NETLINK, NETLINK_ADD_MEMBERSHIP, &on, sizeof(on));
}
#endif
if (0) {
int i, j;
memset(buf, 0, sizeof(buf));
data = (struct cn_msg *)buf;
data->id.idx = 0x123;
data->id.val = 0x456;
data->seq = seq++;
data->ack = 0;
data->len = 0;
for (j=0; j<10; ++j) {
for (i=0; i<1000; ++i) {
len = netlink_send(s, data);
}
ulog("%d messages have been sent to %08x.%08x.\n", i, data->id.idx, data->id.val);
}
return 0;
}
pfd.fd = s;
while (!need_exit) {
pfd.events = POLLIN;
pfd.revents = 0;
switch (poll(&pfd, 1, -1)) {
case 0:
need_exit = 1;
break;
case -1:
if (errno != EINTR) {
need_exit = 1;
break;
}
continue;
}
if (need_exit)
break;
memset(buf, 0, sizeof(buf));
len = recv(s, buf, sizeof(buf), 0);
if (len == -1) {
perror("recv buf");
close(s);
return -1;
}
reply = (struct nlmsghdr *)buf;
switch (reply->nlmsg_type) {
case NLMSG_ERROR:
fprintf(out, "Error message received.\n");
fflush(out);
break;
case NLMSG_DONE:
data = (struct cn_msg *)NLMSG_DATA(reply);
time(&tm);
fprintf(out, "%.24s : [%x.%x] [%08u.%08u].\n",
ctime(&tm), data->id.idx, data->id.val, data->seq, data->ack);
fflush(out);
break;
default:
break;
}
}
close(s);
return 0;
}

5
Documentation/cpu-freq/user-guide.txt
View File

@ -153,10 +153,13 @@ scaling_governor, and by "echoing" the name of another
that some governors won't load - they only
work on some specific architectures or
processors.
scaling_min_freq and
scaling_min_freq and
scaling_max_freq show the current "policy limits" (in
kHz). By echoing new values into these
files, you can change these limits.
NOTE: when setting a policy you need to
first set scaling_max_freq, then
scaling_min_freq.
If you have selected the "userspace" governor which allows you to

12
Documentation/cpu-hotplug.txt
View File

@ -251,16 +251,24 @@ A: This is what you would need in your kernel code to receive notifications.
return NOTIFY_OK;
}
static struct notifier_block foobar_cpu_notifer =
static struct notifier_block __cpuinitdata foobar_cpu_notifer =
{
.notifier_call = foobar_cpu_callback,
};
You need to call register_cpu_notifier() from your init function.
Init functions could be of two types:
1. early init (init function called when only the boot processor is online).
2. late init (init function called _after_ all the CPUs are online).
In your init function,
For the first case, you should add the following to your init function
register_cpu_notifier(&foobar_cpu_notifier);
For the second case, you should add the following to your init function
register_hotcpu_notifier(&foobar_cpu_notifier);
You can fail PREPARE notifiers if something doesn't work to prepare resources.
This will stop the activity and send a following CANCELED event back.

6
Documentation/cpusets.txt
View File

@ -217,6 +217,12 @@ exclusive cpuset. Also, the use of a Linux virtual file system (vfs)
to represent the cpuset hierarchy provides for a familiar permission
and name space for cpusets, with a minimum of additional kernel code.
The cpus file in the root (top_cpuset) cpuset is read-only.
It automatically tracks the value of cpu_online_map, using a CPU
hotplug notifier. If and when memory nodes can be hotplugged,
we expect to make the mems file in the root cpuset read-only
as well, and have it track the value of node_online_map.
1.4 What are exclusive cpusets ?
--------------------------------

8
Documentation/devices.txt
View File

@ -2565,10 +2565,10 @@ Your cooperation is appreciated.
243 = /dev/usb/dabusb3 Fourth dabusb device
180 block USB block devices
0 = /dev/uba First USB block device
8 = /dev/ubb Second USB block device
16 = /dev/ubc Thrid USB block device
...
0 = /dev/uba First USB block device
8 = /dev/ubb Second USB block device
16 = /dev/ubc Third USB block device
...
181 char Conrad Electronic parallel port radio clocks
0 = /dev/pcfclock0 First Conrad radio clock

152
Documentation/drivers/edac/edac.txt
View File

@ -35,15 +35,14 @@ the vendor should tie the parity status bits to 0 if they do not intend
to generate parity. Some vendors do not do this, and thus the parity bit
can "float" giving false positives.
The PCI Parity EDAC device has the ability to "skip" known flaky
cards during the parity scan. These are set by the parity "blacklist"
interface in the sysfs for PCI Parity. (See the PCI section in the sysfs
section below.) There is also a parity "whitelist" which is used as
an explicit list of devices to scan, while the blacklist is a list
of devices to skip.
[There are patches in the kernel queue which will allow for storage of
quirks of PCI devices reporting false parity positives. The 2.6.18
kernel should have those patches included. When that becomes available,
then EDAC will be patched to utilize that information to "skip" such
devices.]
EDAC will have future error detectors that will be added or integrated
into EDAC in the following list:
EDAC will have future error detectors that will be integrated with
EDAC or added to it, in the following list:
MCE Machine Check Exception
MCA Machine Check Architecture
@ -93,22 +92,24 @@ EDAC lives in the /sys/devices/system/edac directory. Within this directory
there currently reside 2 'edac' components:
mc memory controller(s) system
pci PCI status system
pci PCI control and status system
============================================================================
Memory Controller (mc) Model
First a background on the memory controller's model abstracted in EDAC.
Each mc device controls a set of DIMM memory modules. These modules are
Each 'mc' device controls a set of DIMM memory modules. These modules are
laid out in a Chip-Select Row (csrowX) and Channel table (chX). There can
be multiple csrows and two channels.
be multiple csrows and multiple channels.
Memory controllers allow for several csrows, with 8 csrows being a typical value.
Yet, the actual number of csrows depends on the electrical "loading"
of a given motherboard, memory controller and DIMM characteristics.
Dual channels allows for 128 bit data transfers to the CPU from memory.
Some newer chipsets allow for more than 2 channels, like Fully Buffered DIMMs
(FB-DIMMs). The following example will assume 2 channels:
Channel 0 Channel 1
@ -234,23 +235,15 @@ Polling period control file:
The time period, in milliseconds, for polling for error information.
Too small a value wastes resources. Too large a value might delay
necessary handling of errors and might loose valuable information for
locating the error. 1000 milliseconds (once each second) is about
right for most uses.
locating the error. 1000 milliseconds (once each second) is the current
default. Systems which require all the bandwidth they can get, may
increase this.
LOAD TIME: module/kernel parameter: poll_msec=[0|1]
RUN TIME: echo "1000" >/sys/devices/system/edac/mc/poll_msec
Module Version read-only attribute file:
'mc_version'
The EDAC CORE module's version and compile date are shown here to
indicate what EDAC is running.
============================================================================
'mcX' DIRECTORIES
@ -284,35 +277,6 @@ Seconds since last counter reset control file:
DIMM capability attribute file:
'edac_capability'
The EDAC (Error Detection and Correction) capabilities/modes of
the memory controller hardware.
DIMM Current Capability attribute file:
'edac_current_capability'
The EDAC capabilities available with the hardware
configuration. This may not be the same as "EDAC capability"
if the correct memory is not used. If a memory controller is
capable of EDAC, but DIMMs without check bits are in use, then
Parity, SECDED, S4ECD4ED capabilities will not be available
even though the memory controller might be capable of those
modes with the proper memory loaded.
Memory Type supported on this controller attribute file:
'supported_mem_type'
This attribute file displays the memory type, usually
buffered and unbuffered DIMMs.
Memory Controller name attribute file:
'mc_name'
@ -321,16 +285,6 @@ Memory Controller name attribute file:
that is being utilized.
Memory Controller Module name attribute file:
'module_name'
This attribute file displays the memory controller module name,
version and date built. The name of the memory controller
hardware - some drivers work with multiple controllers and
this field shows which hardware is present.
Total memory managed by this memory controller attribute file:
'size_mb'
@ -432,6 +386,9 @@ Memory Type attribute file:
This attribute file will display what type of memory is currently
on this csrow. Normally, either buffered or unbuffered memory.
Examples:
Registered-DDR
Unbuffered-DDR
EDAC Mode of operation attribute file:
@ -446,8 +403,13 @@ Device type attribute file:
'dev_type'
This attribute file will display what type of DIMM device is
being utilized. Example: x4
This attribute file will display what type of DRAM device is
being utilized on this DIMM.
Examples:
x1
x2
x4
x8
Channel 0 CE Count attribute file:
@ -522,10 +484,10 @@ SYSTEM LOGGING
If logging for UEs and CEs are enabled then system logs will have
error notices indicating errors that have been detected:
MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
EDAC MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
channel 1 "DIMM_B1": amd76x_edac
MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
EDAC MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
channel 1 "DIMM_B1": amd76x_edac
@ -610,64 +572,4 @@ Parity Count:
PCI Device Whitelist:
'pci_parity_whitelist'
This control file allows for an explicit list of PCI devices to be
scanned for parity errors. Only devices found on this list will
be examined. The list is a line of hexadecimal VENDOR and DEVICE
ID tuples:
1022:7450,1434:16a6
One or more can be inserted, separated by a comma.
To write the above list doing the following as one command line:
echo "1022:7450,1434:16a6"
> /sys/devices/system/edac/pci/pci_parity_whitelist
To display what the whitelist is, simply 'cat' the same file.
PCI Device Blacklist:
'pci_parity_blacklist'
This control file allows for a list of PCI devices to be
skipped for scanning.
The list is a line of hexadecimal VENDOR and DEVICE ID tuples:
1022:7450,1434:16a6
One or more can be inserted, separated by a comma.
To write the above list doing the following as one command line:
echo "1022:7450,1434:16a6"
> /sys/devices/system/edac/pci/pci_parity_blacklist
To display what the whitelist currently contains,
simply 'cat' the same file.
=======================================================================
PCI Vendor and Devices IDs can be obtained with the lspci command. Using
the -n option lspci will display the vendor and device IDs. The system
administrator will have to determine which devices should be scanned or
skipped.
The two lists (white and black) are prioritized. blacklist is the lower
priority and will NOT be utilized when a whitelist has been set.
Turn OFF a whitelist by an empty echo command:
echo > /sys/devices/system/edac/pci/pci_parity_whitelist
and any previous blacklist will be utilized.

31
Documentation/fb/imacfb.txt Normal file
View File

@ -0,0 +1,31 @@
What is imacfb?
===============
This is a generic EFI platform driver for Intel based Apple computers.
Imacfb is only for EFI booted Intel Macs.
Supported Hardware
==================
iMac 17"/20"
Macbook
Macbook Pro 15"/17"
MacMini
How to use it?
==============
Imacfb does not have any kind of autodetection of your machine.
You have to add the fillowing kernel parameters in your elilo.conf:
Macbook :
video=imacfb:macbook
MacMini :
video=imacfb:mini
Macbook Pro 15", iMac 17" :
video=imacfb:i17
Macbook Pro 17", iMac 20" :
video=imacfb:i20
--
Edgar Hucek <gimli@dark-green.com>

66
Documentation/feature-removal-schedule.txt
View File

@ -55,14 +55,6 @@ Who: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
---------------------------
What: remove EXPORT_SYMBOL(insert_resource)
When: April 2006
Files: kernel/resource.c
Why: No modular usage in the kernel.
Who: Adrian Bunk <bunk@stusta.de>
---------------------------
What: PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
When: November 2005
Files: drivers/pcmcia/: pcmcia_ioctl.c
@ -128,6 +120,13 @@ Who: Adrian Bunk <bunk@stusta.de>
---------------------------
What: drivers depending on OSS_OBSOLETE_DRIVER
When: options in 2.6.20, code in 2.6.22
Why: OSS drivers with ALSA replacements
Who: Adrian Bunk <bunk@stusta.de>
---------------------------
What: pci_module_init(driver)
When: January 2007
Why: Is replaced by pci_register_driver(pci_driver).
@ -166,17 +165,6 @@ Who: Arjan van de Ven <arjan@linux.intel.com>
---------------------------
What: remove EXPORT_SYMBOL(tasklist_lock)
When: August 2006
Files: kernel/fork.c
Why: tasklist_lock protects the kernel internal task list. Modules have
no business looking at it, and all instances in drivers have been due
to use of too-lowlevel APIs. Having this symbol exported prevents
moving to more scalable locking schemes for the task list.
Who: Christoph Hellwig <hch@lst.de>
---------------------------
What: mount/umount uevents
When: February 2007
Why: These events are not correct, and do not properly let userspace know
@ -266,3 +254,43 @@ Why: The interrupt related SA_* flags are replaced by IRQF_* to move them
Who: Thomas Gleixner <tglx@linutronix.de>
---------------------------
What: i2c-ite and i2c-algo-ite drivers
When: September 2006
Why: These drivers never compiled since they were added to the kernel
tree 5 years ago. This feature removal can be reevaluated if
someone shows interest in the drivers, fixes them and takes over
maintenance.
http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
Who: Jean Delvare <khali@linux-fr.org>
---------------------------
What: Bridge netfilter deferred IPv4/IPv6 output hook calling
When: January 2007
Why: The deferred output hooks are a layering violation causing unusual
and broken behaviour on bridge devices. Examples of things they
break include QoS classifation using the MARK or CLASSIFY targets,
the IPsec policy match and connection tracking with VLANs on a
bridge. Their only use is to enable bridge output port filtering
within iptables with the physdev match, which can also be done by
combining iptables and ebtables using netfilter marks. Until it
will get removed the hook deferral is disabled by default and is
only enabled when needed.
Who: Patrick McHardy <kaber@trash.net>
---------------------------
What: frame diverter
When: November 2006
Why: The frame diverter is included in most distribution kernels, but is
broken. It does not correctly handle many things:
- IPV6
- non-linear skb's
- network device RCU on removal
- input frames not correctly checked for protocol errors
It also adds allocation overhead even if not enabled.
It is not clear if anyone is still using it.
Who: Stephen Hemminger <shemminger@osdl.org>

4
Documentation/filesystems/00-INDEX
View File

@ -62,8 +62,8 @@ ramfs-rootfs-initramfs.txt
- info on the 'in memory' filesystems ramfs, rootfs and initramfs.
reiser4.txt
- info on the Reiser4 filesystem based on dancing tree algorithms.
relayfs.txt
- info on relayfs, for efficient streaming from kernel to user space.
relay.txt
- info on relay, for efficient streaming from kernel to user space.
romfs.txt
- description of the ROMFS filesystem.
smbfs.txt

4
Documentation/filesystems/Locking
View File

@ -142,8 +142,8 @@ see also dquot_operations section.
--------------------------- file_system_type ---------------------------
prototypes:
struct int (*get_sb) (struct file_system_type *, int,
const char *, void *, struct vfsmount *);
int (*get_sb) (struct file_system_type *, int,
const char *, void *, struct vfsmount *);
void (*kill_sb) (struct super_block *);
locking rules:
may block BKL

479
Documentation/filesystems/relay.txt Normal file
View File

@ -0,0 +1,479 @@
relay interface (formerly relayfs)
==================================
The relay interface provides a means for kernel applications to
efficiently log and transfer large quantities of data from the kernel
to userspace via user-defined 'relay channels'.
A 'relay channel' is a kernel->user data relay mechanism implemented
as a set of per-cpu kernel buffers ('channel buffers'), each
represented as a regular file ('relay file') in user space. Kernel
clients write into the channel buffers using efficient write
functions; these automatically log into the current cpu's channel
buffer. User space applications mmap() or read() from the relay files
and retrieve the data as it becomes available. The relay files
themselves are files created in a host filesystem, e.g. debugfs, and
are associated with the channel buffers using the API described below.
The format of the data logged into the channel buffers is completely
up to the kernel client; the relay interface does however provide
hooks which allow kernel clients to impose some structure on the
buffer data. The relay interface doesn't implement any form of data
filtering - this also is left to the kernel client. The purpose is to
keep things as simple as possible.
This document provides an overview of the relay interface API. The
details of the function parameters are documented along with the
functions in the relay interface code - please see that for details.
Semantics
=========
Each relay channel has one buffer per CPU, each buffer has one or more
sub-buffers. Messages are written to the first sub-buffer until it is
too full to contain a new message, in which case it it is written to
the next (if available). Messages are never split across sub-buffers.
At this point, userspace can be notified so it empties the first
sub-buffer, while the kernel continues writing to the next.
When notified that a sub-buffer is full, the kernel knows how many
bytes of it are padding i.e. unused space occurring because a complete
message couldn't fit into a sub-buffer. Userspace can use this
knowledge to copy only valid data.
After copying it, userspace can notify the kernel that a sub-buffer
has been consumed.
A relay channel can operate in a mode where it will overwrite data not
yet collected by userspace, and not wait for it to be consumed.
The relay channel itself does not provide for communication of such
data between userspace and kernel, allowing the kernel side to remain
simple and not impose a single interface on userspace. It does
provide a set of examples and a separate helper though, described
below.
The read() interface both removes padding and internally consumes the
read sub-buffers; thus in cases where read(2) is being used to drain
the channel buffers, special-purpose communication between kernel and
user isn't necessary for basic operation.
One of the major goals of the relay interface is to provide a low
overhead mechanism for conveying kernel data to userspace. While the
read() interface is easy to use, it's not as efficient as the mmap()
approach; the example code attempts to make the tradeoff between the
two approaches as small as possible.
klog and relay-apps example code
================================
The relay interface itself is ready to use, but to make things easier,
a couple simple utility functions and a set of examples are provided.
The relay-apps example tarball, available on the relay sourceforge
site, contains a set of self-contained examples, each consisting of a
pair of .c files containing boilerplate code for each of the user and
kernel sides of a relay application. When combined these two sets of
boilerplate code provide glue to easily stream data to disk, without
having to bother with mundane housekeeping chores.
The 'klog debugging functions' patch (klog.patch in the relay-apps
tarball) provides a couple of high-level logging functions to the
kernel which allow writing formatted text or raw data to a channel,
regardless of whether a channel to write into exists or not, or even
whether the relay interface is compiled into the kernel or not. These
functions allow you to put unconditional 'trace' statements anywhere
in the kernel or kernel modules; only when there is a 'klog handler'
registered will data actually be logged (see the klog and kleak
examples for details).
It is of course possible to use the relay interface from scratch,
i.e. without using any of the relay-apps example code or klog, but
you'll have to implement communication between userspace and kernel,
allowing both to convey the state of buffers (full, empty, amount of
padding). The read() interface both removes padding and internally
consumes the read sub-buffers; thus in cases where read(2) is being
used to drain the channel buffers, special-purpose communication
between kernel and user isn't necessary for basic operation. Things
such as buffer-full conditions would still need to be communicated via
some channel though.
klog and the relay-apps examples can be found in the relay-apps
tarball on http://relayfs.sourceforge.net
The relay interface user space API
==================================
The relay interface implements basic file operations for user space
access to relay channel buffer data. Here are the file operations
that are available and some comments regarding their behavior:
open() enables user to open an _existing_ channel buffer.
mmap() results in channel buffer being mapped into the caller's
memory space. Note that you can't do a partial mmap - you
must map the entire file, which is NRBUF * SUBBUFSIZE.
read() read the contents of a channel buffer. The bytes read are
'consumed' by the reader, i.e. they won't be available
again to subsequent reads. If the channel is being used
in no-overwrite mode (the default), it can be read at any
time even if there's an active kernel writer. If the
channel is being used in overwrite mode and there are
active channel writers, results may be unpredictable -
users should make sure that all logging to the channel has
ended before using read() with overwrite mode. Sub-buffer
padding is automatically removed and will not be seen by
the reader.
sendfile() transfer data from a channel buffer to an output file
descriptor. Sub-buffer padding is automatically removed
and will not be seen by the reader.
poll() POLLIN/POLLRDNORM/POLLERR supported. User applications are
notified when sub-buffer boundaries are crossed.
close() decrements the channel buffer's refcount. When the refcount
reaches 0, i.e. when no process or kernel client has the
buffer open, the channel buffer is freed.
In order for a user application to make use of relay files, the
host filesystem must be mounted. For example,
mount -t debugfs debugfs /debug
NOTE: the host filesystem doesn't need to be mounted for kernel
clients to create or use channels - it only needs to be
mounted when user space applications need access to the buffer
data.
The relay interface kernel API
==============================
Here's a summary of the API the relay interface provides to in-kernel clients:
TBD(curr. line MT:/API/)
channel management functions:
relay_open(base_filename, parent, subbuf_size, n_subbufs,
callbacks)
relay_close(chan)
relay_flush(chan)
relay_reset(chan)
channel management typically called on instigation of userspace:
relay_subbufs_consumed(chan, cpu, subbufs_consumed)
write functions:
relay_write(chan, data, length)
__relay_write(chan, data, length)
relay_reserve(chan, length)
callbacks:
subbuf_start(buf, subbuf, prev_subbuf, prev_padding)
buf_mapped(buf, filp)
buf_unmapped(buf, filp)
create_buf_file(filename, parent, mode, buf, is_global)
remove_buf_file(dentry)
helper functions:
relay_buf_full(buf)
subbuf_start_reserve(buf, length)
Creating a channel
------------------
relay_open() is used to create a channel, along with its per-cpu
channel buffers. Each channel buffer will have an associated file
created for it in the host filesystem, which can be and mmapped or
read from in user space. The files are named basename0...basenameN-1
where N is the number of online cpus, and by default will be created
in the root of the filesystem (if the parent param is NULL). If you
want a directory structure to contain your relay files, you should
create it using the host filesystem's directory creation function,
e.g. debugfs_create_dir(), and pass the parent directory to
relay_open(). Users are responsible for cleaning up any directory
structure they create, when the channel is closed - again the host
filesystem's directory removal functions should be used for that,
e.g. debugfs_remove().
In order for a channel to be created and the host filesystem's files
associated with its channel buffers, the user must provide definitions
for two callback functions, create_buf_file() and remove_buf_file().
create_buf_file() is called once for each per-cpu buffer from
relay_open() and allows the user to create the file which will be used
to represent the corresponding channel buffer. The callback should
return the dentry of the file created to represent the channel buffer.
remove_buf_file() must also be defined; it's responsible for deleting
the file(s) created in create_buf_file() and is called during
relay_close().
Here are some typical definitions for these callbacks, in this case
using debugfs:
/*
* create_buf_file() callback. Creates relay file in debugfs.
*/
static struct dentry *create_buf_file_handler(const char *filename,
struct dentry *parent,
int mode,
struct rchan_buf *buf,
int *is_global)
{
return debugfs_create_file(filename, mode, parent, buf,
&relay_file_operations);
}
/*
* remove_buf_file() callback. Removes relay file from debugfs.
*/
static int remove_buf_file_handler(struct dentry *dentry)
{
debugfs_remove(dentry);
return 0;
}
/*
* relay interface callbacks
*/
static struct rchan_callbacks relay_callbacks =
{
.create_buf_file = create_buf_file_handler,
.remove_buf_file = remove_buf_file_handler,
};
And an example relay_open() invocation using them:
chan = relay_open("cpu", NULL, SUBBUF_SIZE, N_SUBBUFS, &relay_callbacks);
If the create_buf_file() callback fails, or isn't defined, channel
creation and thus relay_open() will fail.
The total size of each per-cpu buffer is calculated by multiplying the
number of sub-buffers by the sub-buffer size passed into relay_open().
The idea behind sub-buffers is that they're basically an extension of
double-buffering to N buffers, and they also allow applications to
easily implement random-access-on-buffer-boundary schemes, which can
be important for some high-volume applications. The number and size
of sub-buffers is completely dependent on the application and even for
the same application, different conditions will warrant different
values for these parameters at different times. Typically, the right
values to use are best decided after some experimentation; in general,
though, it's safe to assume that having only 1 sub-buffer is a bad
idea - you're guaranteed to either overwrite data or lose events
depending on the channel mode being used.
The create_buf_file() implementation can also be defined in such a way
as to allow the creation of a single 'global' buffer instead of the
default per-cpu set. This can be useful for applications interested
mainly in seeing the relative ordering of system-wide events without
the need to bother with saving explicit timestamps for the purpose of
merging/sorting per-cpu files in a postprocessing step.
To have relay_open() create a global buffer, the create_buf_file()
implementation should set the value of the is_global outparam to a
non-zero value in addition to creating the file that will be used to
represent the single buffer. In the case of a global buffer,
create_buf_file() and remove_buf_file() will be called only once. The
normal channel-writing functions, e.g. relay_write(), can still be
used - writes from any cpu will transparently end up in the global
buffer - but since it is a global buffer, callers should make sure
they use the proper locking for such a buffer, either by wrapping
writes in a spinlock, or by copying a write function from relay.h and
creating a local version that internally does the proper locking.
Channel 'modes'
---------------
relay channels can be used in either of two modes - 'overwrite' or
'no-overwrite'. The mode is entirely determined by the implementation
of the subbuf_start() callback, as described below. The default if no
subbuf_start() callback is defined is 'no-overwrite' mode. If the
default mode suits your needs, and you plan to use the read()
interface to retrieve channel data, you can ignore the details of this
section, as it pertains mainly to mmap() implementations.
In 'overwrite' mode, also known as 'flight recorder' mode, writes
continuously cycle around the buffer and will never fail, but will
unconditionally overwrite old data regardless of whether it's actually
been consumed. In no-overwrite mode, writes will fail, i.e. data will
be lost, if the number of unconsumed sub-buffers equals the total
number of sub-buffers in the channel. It should be clear that if
there is no consumer or if the consumer can't consume sub-buffers fast
enough, data will be lost in either case; the only difference is
whether data is lost from the beginning or the end of a buffer.
As explained above, a relay channel is made of up one or more
per-cpu channel buffers, each implemented as a circular buffer
subdivided into one or more sub-buffers. Messages are written into
the current sub-buffer of the channel's current per-cpu buffer via the
write functions described below. Whenever a message can't fit into
the current sub-buffer, because there's no room left for it, the
client is notified via the subbuf_start() callback that a switch to a
new sub-buffer is about to occur. The client uses this callback to 1)
initialize the next sub-buffer if appropriate 2) finalize the previous
sub-buffer if appropriate and 3) return a boolean value indicating
whether or not to actually move on to the next sub-buffer.
To implement 'no-overwrite' mode, the userspace client would provide
an implementation of the subbuf_start() callback something like the
following:
static int subbuf_start(struct rchan_buf *buf,
void *subbuf,
void *prev_subbuf,
unsigned int prev_padding)
{
if (prev_subbuf)
*((unsigned *)prev_subbuf) = prev_padding;
if (relay_buf_full(buf))
return 0;
subbuf_start_reserve(buf, sizeof(unsigned int));
return 1;
}
If the current buffer is full, i.e. all sub-buffers remain unconsumed,
the callback returns 0 to indicate that the buffer switch should not
occur yet, i.e. until the consumer has had a chance to read the
current set of ready sub-buffers. For the relay_buf_full() function
to make sense, the consumer is reponsible for notifying the relay
interface when sub-buffers have been consumed via
relay_subbufs_consumed(). Any subsequent attempts to write into the
buffer will again invoke the subbuf_start() callback with the same
parameters; only when the consumer has consumed one or more of the
ready sub-buffers will relay_buf_full() return 0, in which case the
buffer switch can continue.
The implementation of the subbuf_start() callback for 'overwrite' mode
would be very similar:
static int subbuf_start(struct rchan_buf *buf,
void *subbuf,
void *prev_subbuf,
unsigned int prev_padding)
{
if (prev_subbuf)
*((unsigned *)prev_subbuf) = prev_padding;
subbuf_start_reserve(buf, sizeof(unsigned int));
return 1;
}
In this case, the relay_buf_full() check is meaningless and the
callback always returns 1, causing the buffer switch to occur
unconditionally. It's also meaningless for the client to use the
relay_subbufs_consumed() function in this mode, as it's never
consulted.
The default subbuf_start() implementation, used if the client doesn't
define any callbacks, or doesn't define the subbuf_start() callback,
implements the simplest possible 'no-overwrite' mode, i.e. it does
nothing but return 0.
Header information can be reserved at the beginning of each sub-buffer
by calling the subbuf_start_reserve() helper function from within the
subbuf_start() callback. This reserved area can be used to store
whatever information the client wants. In the example above, room is
reserved in each sub-buffer to store the padding count for that
sub-buffer. This is filled in for the previous sub-buffer in the
subbuf_start() implementation; the padding value for the previous
sub-buffer is passed into the subbuf_start() callback along with a
pointer to the previous sub-buffer, since the padding value isn't
known until a sub-buffer is filled. The subbuf_start() callback is
also called for the first sub-buffer when the channel is opened, to
give the client a chance to reserve space in it. In this case the
previous sub-buffer pointer passed into the callback will be NULL, so
the client should check the value of the prev_subbuf pointer before
writing into the previous sub-buffer.
Writing to a channel
--------------------
Kernel clients write data into the current cpu's channel buffer using
relay_write() or __relay_write(). relay_write() is the main logging
function - it uses local_irqsave() to protect the buffer and should be
used if you might be logging from interrupt context. If you know
you'll never be logging from interrupt context, you can use
__relay_write(), which only disables preemption. These functions
don't return a value, so you can't determine whether or not they
failed - the assumption is that you wouldn't want to check a return
value in the fast logging path anyway, and that they'll always succeed
unless the buffer is full and no-overwrite mode is being used, in
which case you can detect a failed write in the subbuf_start()
callback by calling the relay_buf_full() helper function.
relay_reserve() is used to reserve a slot in a channel buffer which
can be written to later. This would typically be used in applications
that need to write directly into a channel buffer without having to
stage data in a temporary buffer beforehand. Because the actual write
may not happen immediately after the slot is reserved, applications
using relay_reserve() can keep a count of the number of bytes actually
written, either in space reserved in the sub-buffers themselves or as
a separate array. See the 'reserve' example in the relay-apps tarball
at http://relayfs.sourceforge.net for an example of how this can be
done. Because the write is under control of the client and is
separated from the reserve, relay_reserve() doesn't protect the buffer
at all - it's up to the client to provide the appropriate
synchronization when using relay_reserve().
Closing a channel
-----------------
The client calls relay_close() when it's finished using the channel.
The channel and its associated buffers are destroyed when there are no
longer any references to any of the channel buffers. relay_flush()
forces a sub-buffer switch on all the channel buffers, and can be used
to finalize and process the last sub-buffers before the channel is
closed.
Misc
----
Some applications may want to keep a channel around and re-use it
rather than open and close a new channel for each use. relay_reset()
can be used for this purpose - it resets a channel to its initial
state without reallocating channel buffer memory or destroying
existing mappings. It should however only be called when it's safe to
do so, i.e. when the channel isn't currently being written to.
Finally, there are a couple of utility callbacks that can be used for
different purposes. buf_mapped() is called whenever a channel buffer
is mmapped from user space and buf_unmapped() is called when it's
unmapped. The client can use this notification to trigger actions
within the kernel application, such as enabling/disabling logging to
the channel.
Resources
=========
For news, example code, mailing list, etc. see the relay interface homepage:
http://relayfs.sourceforge.net
Credits
=======
The ideas and specs for the relay interface came about as a result of
discussions on tracing involving the following:
Michel Dagenais <michel.dagenais@polymtl.ca>
Richard Moore <richardj_moore@uk.ibm.com>
Bob Wisniewski <bob@watson.ibm.com>
Karim Yaghmour <karim@opersys.com>
Tom Zanussi <zanussi@us.ibm.com>
Also thanks to Hubertus Franke for a lot of useful suggestions and bug
reports.

442
Documentation/filesystems/relayfs.txt
View File

@ -1,442 +0,0 @@
relayfs - a high-speed data relay filesystem
============================================
relayfs is a filesystem designed to provide an efficient mechanism for
tools and facilities to relay large and potentially sustained streams
of data from kernel space to user space.
The main abstraction of relayfs is the 'channel'. A channel consists
of a set of per-cpu kernel buffers each represented by a file in the
relayfs filesystem. Kernel clients write into a channel using
efficient write functions which automatically log to the current cpu's
channel buffer. User space applications mmap() the per-cpu files and
retrieve the data as it becomes available.
The format of the data logged into the channel buffers is completely
up to the relayfs client; relayfs does however provide hooks which
allow clients to impose some structure on the buffer data. Nor does
relayfs implement any form of data filtering - this also is left to
the client. The purpose is to keep relayfs as simple as possible.
This document provides an overview of the relayfs API. The details of
the function parameters are documented along with the functions in the
filesystem code - please see that for details.
Semantics
=========
Each relayfs channel has one buffer per CPU, each buffer has one or
more sub-buffers. Messages are written to the first sub-buffer until
it is too full to contain a new message, in which case it it is
written to the next (if available). Messages are never split across
sub-buffers. At this point, userspace can be notified so it empties
the first sub-buffer, while the kernel continues writing to the next.
When notified that a sub-buffer is full, the kernel knows how many
bytes of it are padding i.e. unused. Userspace can use this knowledge
to copy only valid data.
After copying it, userspace can notify the kernel that a sub-buffer
has been consumed.
relayfs can operate in a mode where it will overwrite data not yet
collected by userspace, and not wait for it to consume it.
relayfs itself does not provide for communication of such data between
userspace and kernel, allowing the kernel side to remain simple and
not impose a single interface on userspace. It does provide a set of
examples and a separate helper though, described below.
klog and relay-apps example code
================================
relayfs itself is ready to use, but to make things easier, a couple
simple utility functions and a set of examples are provided.
The relay-apps example tarball, available on the relayfs sourceforge
site, contains a set of self-contained examples, each consisting of a
pair of .c files containing boilerplate code for each of the user and
kernel sides of a relayfs application; combined these two sets of
boilerplate code provide glue to easily stream data to disk, without
having to bother with mundane housekeeping chores.
The 'klog debugging functions' patch (klog.patch in the relay-apps
tarball) provides a couple of high-level logging functions to the
kernel which allow writing formatted text or raw data to a channel,
regardless of whether a channel to write into exists or not, or
whether relayfs is compiled into the kernel or is configured as a
module. These functions allow you to put unconditional 'trace'
statements anywhere in the kernel or kernel modules; only when there
is a 'klog handler' registered will data actually be logged (see the
klog and kleak examples for details).
It is of course possible to use relayfs from scratch i.e. without
using any of the relay-apps example code or klog, but you'll have to
implement communication between userspace and kernel, allowing both to
convey the state of buffers (full, empty, amount of padding).
klog and the relay-apps examples can be found in the relay-apps
tarball on http://relayfs.sourceforge.net
The relayfs user space API
==========================
relayfs implements basic file operations for user space access to
relayfs channel buffer data. Here are the file operations that are
available and some comments regarding their behavior:
open() enables user to open an _existing_ buffer.
mmap() results in channel buffer being mapped into the caller's
memory space. Note that you can't do a partial mmap - you must
map the entire file, which is NRBUF * SUBBUFSIZE.
read() read the contents of a channel buffer. The bytes read are
'consumed' by the reader i.e. they won't be available again
to subsequent reads. If the channel is being used in
no-overwrite mode (the default), it can be read at any time
even if there's an active kernel writer. If the channel is
being used in overwrite mode and there are active channel
writers, results may be unpredictable - users should make
sure that all logging to the channel has ended before using
read() with overwrite mode.
poll() POLLIN/POLLRDNORM/POLLERR supported. User applications are
notified when sub-buffer boundaries are crossed.
close() decrements the channel buffer's refcount. When the refcount
reaches 0 i.e. when no process or kernel client has the buffer
open, the channel buffer is freed.
In order for a user application to make use of relayfs files, the
relayfs filesystem must be mounted. For example,
mount -t relayfs relayfs /mnt/relay
NOTE: relayfs doesn't need to be mounted for kernel clients to create
or use channels - it only needs to be mounted when user space
applications need access to the buffer data.
The relayfs kernel API
======================
Here's a summary of the API relayfs provides to in-kernel clients:
channel management functions:
relay_open(base_filename, parent, subbuf_size, n_subbufs,
callbacks)
relay_close(chan)
relay_flush(chan)
relay_reset(chan)
relayfs_create_dir(name, parent)
relayfs_remove_dir(dentry)
relayfs_create_file(name, parent, mode, fops, data)
relayfs_remove_file(dentry)
channel management typically called on instigation of userspace:
relay_subbufs_consumed(chan, cpu, subbufs_consumed)
write functions:
relay_write(chan, data, length)
__relay_write(chan, data, length)
relay_reserve(chan, length)
callbacks:
subbuf_start(buf, subbuf, prev_subbuf, prev_padding)
buf_mapped(buf, filp)
buf_unmapped(buf, filp)
create_buf_file(filename, parent, mode, buf, is_global)
remove_buf_file(dentry)
helper functions:
relay_buf_full(buf)
subbuf_start_reserve(buf, length)
Creating a channel
------------------
relay_open() is used to create a channel, along with its per-cpu
channel buffers. Each channel buffer will have an associated file
created for it in the relayfs filesystem, which can be opened and
mmapped from user space if desired. The files are named
basename0...basenameN-1 where N is the number of online cpus, and by
default will be created in the root of the filesystem. If you want a
directory structure to contain your relayfs files, you can create it
with relayfs_create_dir() and pass the parent directory to
relay_open(). Clients are responsible for cleaning up any directory
structure they create when the channel is closed - use
relayfs_remove_dir() for that.
The total size of each per-cpu buffer is calculated by multiplying the
number of sub-buffers by the sub-buffer size passed into relay_open().
The idea behind sub-buffers is that they're basically an extension of
double-buffering to N buffers, and they also allow applications to
easily implement random-access-on-buffer-boundary schemes, which can
be important for some high-volume applications. The number and size
of sub-buffers is completely dependent on the application and even for
the same application, different conditions will warrant different
values for these parameters at different times. Typically, the right
values to use are best decided after some experimentation; in general,
though, it's safe to assume that having only 1 sub-buffer is a bad
idea - you're guaranteed to either overwrite data or lose events
depending on the channel mode being used.
Channel 'modes'
---------------
relayfs channels can be used in either of two modes - 'overwrite' or
'no-overwrite'. The mode is entirely determined by the implementation
of the subbuf_start() callback, as described below. In 'overwrite'
mode, also known as 'flight recorder' mode, writes continuously cycle
around the buffer and will never fail, but will unconditionally
overwrite old data regardless of whether it's actually been consumed.
In no-overwrite mode, writes will fail i.e. data will be lost, if the
number of unconsumed sub-buffers equals the total number of
sub-buffers in the channel. It should be clear that if there is no
consumer or if the consumer can't consume sub-buffers fast enought,
data will be lost in either case; the only difference is whether data
is lost from the beginning or the end of a buffer.
As explained above, a relayfs channel is made of up one or more
per-cpu channel buffers, each implemented as a circular buffer
subdivided into one or more sub-buffers. Messages are written into
the current sub-buffer of the channel's current per-cpu buffer via the
write functions described below. Whenever a message can't fit into
the current sub-buffer, because there's no room left for it, the
client is notified via the subbuf_start() callback that a switch to a
new sub-buffer is about to occur. The client uses this callback to 1)
initialize the next sub-buffer if appropriate 2) finalize the previous
sub-buffer if appropriate and 3) return a boolean value indicating
whether or not to actually go ahead with the sub-buffer switch.
To implement 'no-overwrite' mode, the userspace client would provide
an implementation of the subbuf_start() callback something like the
following:
static int subbuf_start(struct rchan_buf *buf,
void *subbuf,
void *prev_subbuf,
unsigned int prev_padding)
{
if (prev_subbuf)
*((unsigned *)prev_subbuf) = prev_padding;
if (relay_buf_full(buf))
return 0;
subbuf_start_reserve(buf, sizeof(unsigned int));
return 1;
}
If the current buffer is full i.e. all sub-buffers remain unconsumed,
the callback returns 0 to indicate that the buffer switch should not
occur yet i.e. until the consumer has had a chance to read the current
set of ready sub-buffers. For the relay_buf_full() function to make
sense, the consumer is reponsible for notifying relayfs when
sub-buffers have been consumed via relay_subbufs_consumed(). Any
subsequent attempts to write into the buffer will again invoke the
subbuf_start() callback with the same parameters; only when the
consumer has consumed one or more of the ready sub-buffers will
relay_buf_full() return 0, in which case the buffer switch can
continue.
The implementation of the subbuf_start() callback for 'overwrite' mode
would be very similar:
static int subbuf_start(struct rchan_buf *buf,
void *subbuf,
void *prev_subbuf,
unsigned int prev_padding)
{
if (prev_subbuf)
*((unsigned *)prev_subbuf) = prev_padding;
subbuf_start_reserve(buf, sizeof(unsigned int));
return 1;
}
In this case, the relay_buf_full() check is meaningless and the
callback always returns 1, causing the buffer switch to occur
unconditionally. It's also meaningless for the client to use the
relay_subbufs_consumed() function in this mode, as it's never
consulted.
The default subbuf_start() implementation, used if the client doesn't
define any callbacks, or doesn't define the subbuf_start() callback,
implements the simplest possible 'no-overwrite' mode i.e. it does
nothing but return 0.
Header information can be reserved at the beginning of each sub-buffer
by calling the subbuf_start_reserve() helper function from within the
subbuf_start() callback. This reserved area can be used to store
whatever information the client wants. In the example above, room is
reserved in each sub-buffer to store the padding count for that
sub-buffer. This is filled in for the previous sub-buffer in the
subbuf_start() implementation; the padding value for the previous
sub-buffer is passed into the subbuf_start() callback along with a
pointer to the previous sub-buffer, since the padding value isn't
known until a sub-buffer is filled. The subbuf_start() callback is
also called for the first sub-buffer when the channel is opened, to
give the client a chance to reserve space in it. In this case the
previous sub-buffer pointer passed into the callback will be NULL, so
the client should check the value of the prev_subbuf pointer before
writing into the previous sub-buffer.
Writing to a channel
--------------------
kernel clients write data into the current cpu's channel buffer using
relay_write() or __relay_write(). relay_write() is the main logging
function - it uses local_irqsave() to protect the buffer and should be
used if you might be logging from interrupt context. If you know
you'll never be logging from interrupt context, you can use
__relay_write(), which only disables preemption. These functions
don't return a value, so you can't determine whether or not they
failed - the assumption is that you wouldn't want to check a return
value in the fast logging path anyway, and that they'll always succeed
unless the buffer is full and no-overwrite mode is being used, in
which case you can detect a failed write in the subbuf_start()
callback by calling the relay_buf_full() helper function.
relay_reserve() is used to reserve a slot in a channel buffer which
can be written to later. This would typically be used in applications
that need to write directly into a channel buffer without having to
stage data in a temporary buffer beforehand. Because the actual write
may not happen immediately after the slot is reserved, applications
using relay_reserve() can keep a count of the number of bytes actually
written, either in space reserved in the sub-buffers themselves or as
a separate array. See the 'reserve' example in the relay-apps tarball
at http://relayfs.sourceforge.net for an example of how this can be
done. Because the write is under control of the client and is
separated from the reserve, relay_reserve() doesn't protect the buffer
at all - it's up to the client to provide the appropriate
synchronization when using relay_reserve().
Closing a channel
-----------------
The client calls relay_close() when it's finished using the channel.
The channel and its associated buffers are destroyed when there are no
longer any references to any of the channel buffers. relay_flush()
forces a sub-buffer switch on all the channel buffers, and can be used
to finalize and process the last sub-buffers before the channel is
closed.
Creating non-relay files
------------------------
relay_open() automatically creates files in the relayfs filesystem to
represent the per-cpu kernel buffers; it's often useful for
applications to be able to create their own files alongside the relay
files in the relayfs filesystem as well e.g. 'control' files much like
those created in /proc or debugfs for similar purposes, used to
communicate control information between the kernel and user sides of a
relayfs application. For this purpose the relayfs_create_file() and
relayfs_remove_file() API functions exist. For relayfs_create_file(),
the caller passes in a set of user-defined file operations to be used
for the file and an optional void * to a user-specified data item,
which will be accessible via inode->u.generic_ip (see the relay-apps
tarball for examples). The file_operations are a required parameter
to relayfs_create_file() and thus the semantics of these files are
completely defined by the caller.
See the relay-apps tarball at http://relayfs.sourceforge.net for
examples of how these non-relay files are meant to be used.
Creating relay files in other filesystems
-----------------------------------------
By default of course, relay_open() creates relay files in the relayfs
filesystem. Because relay_file_operations is exported, however, it's
also possible to create and use relay files in other pseudo-filesytems
such as debugfs.
For this purpose, two callback functions are provided,
create_buf_file() and remove_buf_file(). create_buf_file() is called
once for each per-cpu buffer from relay_open() to allow the client to
create a file to be used to represent the corresponding buffer; if
this callback is not defined, the default implementation will create
and return a file in the relayfs filesystem to represent the buffer.
The callback should return the dentry of the file created to represent
the relay buffer. Note that the parent directory passed to
relay_open() (and passed along to the callback), if specified, must
exist in the same filesystem the new relay file is created in. If
create_buf_file() is defined, remove_buf_file() must also be defined;
it's responsible for deleting the file(s) created in create_buf_file()
and is called during relay_close().
The create_buf_file() implementation can also be defined in such a way
as to allow the creation of a single 'global' buffer instead of the
default per-cpu set. This can be useful for applications interested
mainly in seeing the relative ordering of system-wide events without
the need to bother with saving explicit timestamps for the purpose of
merging/sorting per-cpu files in a postprocessing step.
To have relay_open() create a global buffer, the create_buf_file()
implementation should set the value of the is_global outparam to a
non-zero value in addition to creating the file that will be used to
represent the single buffer. In the case of a global buffer,
create_buf_file() and remove_buf_file() will be called only once. The
normal channel-writing functions e.g. relay_write() can still be used
- writes from any cpu will transparently end up in the global buffer -
but since it is a global buffer, callers should make sure they use the
proper locking for such a buffer, either by wrapping writes in a
spinlock, or by copying a write function from relayfs_fs.h and
creating a local version that internally does the proper locking.
See the 'exported-relayfile' examples in the relay-apps tarball for
examples of creating and using relay files in debugfs.
Misc
----
Some applications may want to keep a channel around and re-use it
rather than open and close a new channel for each use. relay_reset()
can be used for this purpose - it resets a channel to its initial
state without reallocating channel buffer memory or destroying
existing mappings. It should however only be called when it's safe to
do so i.e. when the channel isn't currently being written to.
Finally, there are a couple of utility callbacks that can be used for
different purposes. buf_mapped() is called whenever a channel buffer
is mmapped from user space and buf_unmapped() is called when it's
unmapped. The client can use this notification to trigger actions
within the kernel application, such as enabling/disabling logging to
the channel.
Resources
=========
For news, example code, mailing list, etc. see the relayfs homepage:
http://relayfs.sourceforge.net
Credits
=======
The ideas and specs for relayfs came about as a result of discussions
on tracing involving the following:
Michel Dagenais <michel.dagenais@polymtl.ca>
Richard Moore <richardj_moore@uk.ibm.com>
Bob Wisniewski <bob@watson.ibm.com>
Karim Yaghmour <karim@opersys.com>
Tom Zanussi <zanussi@us.ibm.com>
Also thanks to Hubertus Franke for a lot of useful suggestions and bug
reports.

4
Documentation/filesystems/vfs.txt
View File

@ -113,8 +113,8 @@ members are defined:
struct file_system_type {
const char *name;
int fs_flags;
struct int (*get_sb) (struct file_system_type *, int,
const char *, void *, struct vfsmount *);
int (*get_sb) (struct file_system_type *, int,
const char *, void *, struct vfsmount *);
void (*kill_sb) (struct super_block *);
struct module *owner;
struct file_system_type * next;

32
Documentation/hwmon/abituguru
View File

@ -2,13 +2,36 @@ Kernel driver abituguru
=======================
Supported chips:
* Abit uGuru (Hardware Monitor part only)
* Abit uGuru revision 1-3 (Hardware Monitor part only)
Prefix: 'abituguru'
Addresses scanned: ISA 0x0E0
Datasheet: Not available, this driver is based on reverse engineering.
A "Datasheet" has been written based on the reverse engineering it
should be available in the same dir as this file under the name
abituguru-datasheet.
Note:
The uGuru is a microcontroller with onboard firmware which programs
it to behave as a hwmon IC. There are many different revisions of the
firmware and thus effectivly many different revisions of the uGuru.
Below is an incomplete list with which revisions are used for which
Motherboards:
uGuru 1.00 ~ 1.24 (AI7, KV8-MAX3, AN7) (1)
uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
uGuru 3.0.0.0 ~ 3.0.1.2 (AW8, AL8, NI8)
uGuru 4.xxxxx? (AT8 32X) (2)
1) For revisions 2 and 3 uGuru's the driver can autodetect the
sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
this doesnot always work. For these uGuru's the autodection can
be overriden with the bank1_types module param. For all 3 known
revison 1 motherboards the correct use of this param is:
bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
You may also need to specify the fan_sensors option for these boards
fan_sensors=5
2) The current version of the abituguru driver is known to NOT work
on these Motherboards
Authors:
Hans de Goede <j.w.r.degoede@hhs.nl>,
@ -22,6 +45,11 @@ Module Parameters
* force: bool Force detection. Note this parameter only causes the
detection to be skipped, if the uGuru can't be read
the module initialization (insmod) will still fail.
* bank1_types: int[] Bank1 sensortype autodetection override:
-1 autodetect (default)
0 volt sensor
1 temp sensor
2 not connected
* fan_sensors: int Tell the driver how many fan speed sensors there are
on your motherboard. Default: 0 (autodetect).
* pwms: int Tell the driver how many fan speed controls (fan
@ -29,7 +57,7 @@ Module Parameters
* verbose: int How verbose should the driver be? (0-3):
0 normal output
1 + verbose error reporting
2 + sensors type probing info\n"
2 + sensors type probing info (default)
3 + retryable error reporting
Default: 2 (the driver is still in the testing phase)

4
Documentation/i2c/busses/i2c-sis96x
View File

@ -42,8 +42,8 @@ I suspect that this driver could be made to work for the following SiS
chipsets as well: 635, and 635T. If anyone owns a board with those chips
AND is willing to risk crashing & burning an otherwise well-behaved kernel
in the name of progress... please contact me at <mhoffman@lightlink.com> or
via the project's mailing list: <lm-sensors@lm-sensors.org>. Please
send bug reports and/or success stories as well.
via the project's mailing list: <i2c@lm-sensors.org>. Please send bug
reports and/or success stories as well.
TO DOs

1
Documentation/i386/boot.txt
View File

@ -181,6 +181,7 @@ filled out, however:
5 ELILO
7 GRuB
8 U-BOOT
9 Xen
Please contact <hpa@zytor.com> if you need a bootloader ID
value assigned.

4
Documentation/i386/zero-page.txt
View File

@ -63,6 +63,10 @@ Offset Type Description
2 for bootsect-loader
3 for SYSLINUX
4 for ETHERBOOT
5 for ELILO
7 for GRuB
8 for U-BOOT
9 for Xen
V = version
0x211 char loadflags:
bit0 = 1: kernel is loaded high (bzImage)

2
Documentation/infiniband/ipoib.txt
View File

@ -51,8 +51,6 @@ Debugging Information
References
IETF IP over InfiniBand (ipoib) Working Group
http://ietf.org/html.charters/ipoib-charter.html
Transmission of IP over InfiniBand (IPoIB) (RFC 4391)
http://ietf.org/rfc/rfc4391.txt
IP over InfiniBand (IPoIB) Architecture (RFC 4392)

16
Documentation/initrd.txt
View File

@ -72,6 +72,22 @@ initrd adds the following new options:
initrd is mounted as root, and the normal boot procedure is followed,
with the RAM disk still mounted as root.
Compressed cpio images
----------------------
Recent kernels have support for populating a ramdisk from a compressed cpio
archive, on such systems, the creation of a ramdisk image doesn't need to
involve special block devices or loopbacks, you merely create a directory on
disk with the desired initrd content, cd to that directory, and run (as an
example):
find . | cpio --quiet -c -o | gzip -9 -n > /boot/imagefile.img
Examining the contents of an existing image file is just as simple:
mkdir /tmp/imagefile
cd /tmp/imagefile
gzip -cd /boot/imagefile.img | cpio -imd --quiet
Installation
------------

1
Documentation/input/joystick.txt
View File

@ -39,7 +39,6 @@ them. Bug reports and success stories are also welcome.
The input project website is at:
http://www.suse.cz/development/input/
http://atrey.karlin.mff.cuni.cz/~vojtech/input/
There is also a mailing list for the driver at:

14
Documentation/kbuild/makefiles.txt
View File

@ -407,6 +407,20 @@ more details, with real examples.
The second argument is optional, and if supplied will be used
if first argument is not supported.
ld-option
ld-option is used to check if $(CC) when used to link object files
supports the given option. An optional second option may be
specified if first option are not supported.
Example:
#arch/i386/kernel/Makefile
vsyscall-flags += $(call ld-option, -Wl$(comma)--hash-style=sysv)
In the above example vsyscall-flags will be assigned the option
-Wl$(comma)--hash-style=sysv if it is supported by $(CC).
The second argument is optional, and if supplied will be used
if first argument is not supported.
cc-option
cc-option is used to check if $(CC) support a given option, and not
supported to use an optional second option.

10
Documentation/kernel-parameters.txt
View File

@ -697,6 +697,12 @@ running once the system is up.
ips= [HW,SCSI] Adaptec / IBM ServeRAID controller
See header of drivers/scsi/ips.c.
ports= [IP_VS_FTP] IPVS ftp helper module
Default is 21.
Up to 8 (IP_VS_APP_MAX_PORTS) ports
may be specified.
Format: <port>,<port>....
irqfixup [HW]
When an interrupt is not handled search all handlers
for it. Intended to get systems with badly broken
@ -1029,6 +1035,8 @@ running once the system is up.
nocache [ARM]
nodelayacct [KNL] Disable per-task delay accounting
nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
noexec [IA-64]
@ -1181,6 +1189,8 @@ running once the system is up.
Mechanism 2.
nommconf [IA-32,X86_64] Disable use of MMCONFIG for PCI
Configuration
mmconf [IA-32,X86_64] Force MMCONFIG. This is useful
to override the builtin blacklist.
nomsi [MSI] If the PCI_MSI kernel config parameter is
enabled, this kernel boot option can be used to
disable the use of MSI interrupts system-wide.

2
Documentation/kobject.txt
View File

@ -247,7 +247,7 @@ the object-specific fields, which include:
- default_attrs: Default attributes to be exported via sysfs when the
object is registered.Note that the last attribute has to be
initialized to NULL ! You can find a complete implementation
in drivers/block/genhd.c
in block/genhd.c
Instances of struct kobj_type are not registered; only referenced by

5
Documentation/memory-barriers.txt
View File

@ -1015,10 +1015,9 @@ CPU from reordering them.
There are some more advanced barrier functions:
(*) set_mb(var, value)
(*) set_wmb(var, value)
These assign the value to the variable and then insert at least a write
barrier after it, depending on the function. They aren't guaranteed to
This assigns the value to the variable and then inserts at least a write
barrier after it, depending on the function. It isn't guaranteed to
insert anything more than a compiler barrier in a UP compilation.

10
Documentation/mips/time.README
View File

@ -65,7 +65,7 @@ the following functions or values:
1. (optional) set up RTC routines
2. (optional) calibrate and set the mips_counter_frequency
b) board_timer_setup - a function pointer. Invoked at the end of time_init()
b) plat_timer_setup - a function pointer. Invoked at the end of time_init()
1. (optional) over-ride any decisions made in time_init()
2. set up the irqaction for timer interrupt.
3. enable the timer interrupt
@ -116,19 +116,17 @@ Step 2: the machine setup() function
If you supply board_time_init(), set the function poointer.
Set the function pointer board_timer_setup() (mandatory)
Step 3: implement rtc routines, board_time_init() and board_timer_setup()
Step 3: implement rtc routines, board_time_init() and plat_timer_setup()
if needed.
board_time_init() -
board_time_init() -
a) (optional) set up RTC routines,
b) (optional) calibrate and set the mips_counter_frequency
(only needed if you intended to use fixed_rate_gettimeoffset
or use cpu counter as timer interrupt source)
board_timer_setup() -
plat_timer_setup() -
a) (optional) over-write any choices made above by time_init().
b) machine specific code should setup the timer irqaction.
c) enable the timer interrupt

18
Documentation/networking/ip-sysctl.txt
View File

@ -102,9 +102,15 @@ inet_peer_gc_maxtime - INTEGER
TCP variables:
tcp_abc - INTEGER
Controls Appropriate Byte Count defined in RFC3465. If set to
0 then does congestion avoid once per ack. 1 is conservative
value, and 2 is more agressive.
Controls Appropriate Byte Count (ABC) defined in RFC3465.
ABC is a way of increasing congestion window (cwnd) more slowly
in response to partial acknowledgments.
Possible values are:
0 increase cwnd once per acknowledgment (no ABC)
1 increase cwnd once per acknowledgment of full sized segment
2 allow increase cwnd by two if acknowledgment is
of two segments to compensate for delayed acknowledgments.
Default: 0 (off)
tcp_syn_retries - INTEGER
Number of times initial SYNs for an active TCP connection attempt
@ -294,15 +300,15 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max
Default: 87380*2 bytes.
tcp_mem - vector of 3 INTEGERs: min, pressure, max
low: below this number of pages TCP is not bothered about its
min: below this number of pages TCP is not bothered about its
memory appetite.
pressure: when amount of memory allocated by TCP exceeds this number
of pages, TCP moderates its memory consumption and enters memory
pressure mode, which is exited when memory consumption falls
under "low".
under "min".
high: number of pages allowed for queueing by all TCP sockets.
max: number of pages allowed for queueing by all TCP sockets.
Defaults are calculated at boot time from amount of available
memory.

285
Documentation/nfsroot.txt
View File

@ -4,15 +4,16 @@ Mounting the root filesystem via NFS (nfsroot)
Written 1996 by Gero Kuhlmann <gero@gkminix.han.de>
Updated 1997 by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
Updated 2006 by Nico Schottelius <nico-kernel-nfsroot@schottelius.org>
Updated 2006 by Horms <horms@verge.net.au>
If you want to use a diskless system, as an X-terminal or printer
server for example, you have to put your root filesystem onto a
non-disk device. This can either be a ramdisk (see initrd.txt in
this directory for further information) or a filesystem mounted
via NFS. The following text describes on how to use NFS for the
root filesystem. For the rest of this text 'client' means the
In order to use a diskless system, such as an X-terminal or printer server
for example, it is necessary for the root filesystem to be present on a
non-disk device. This may be an initramfs (see Documentation/filesystems/
ramfs-rootfs-initramfs.txt), a ramdisk (see Documenation/initrd.txt) or a
filesystem mounted via NFS. The following text describes on how to use NFS
for the root filesystem. For the rest of this text 'client' means the
diskless system, and 'server' means the NFS server.
@ -21,11 +22,13 @@ diskless system, and 'server' means the NFS server.
1.) Enabling nfsroot capabilities
-----------------------------
In order to use nfsroot you have to select support for NFS during
kernel configuration. Note that NFS cannot be loaded as a module
in this case. The configuration script will then ask you whether
you want to use nfsroot, and if yes what kind of auto configuration
system you want to use. Selecting both BOOTP and RARP is safe.
In order to use nfsroot, NFS client support needs to be selected as
built-in during configuration. Once this has been selected, the nfsroot
option will become available, which should also be selected.
In the networking options, kernel level autoconfiguration can be selected,
along with the types of autoconfiguration to support. Selecting all of
DHCP, BOOTP and RARP is safe.
@ -33,11 +36,10 @@ system you want to use. Selecting both BOOTP and RARP is safe.
2.) Kernel command line
-------------------
When the kernel has been loaded by a boot loader (either by loadlin,
LILO or a network boot program) it has to be told what root fs device
to use, and where to find the server and the name of the directory
on the server to mount as root. This can be established by a couple
of kernel command line parameters:
When the kernel has been loaded by a boot loader (see below) it needs to be
told what root fs device to use. And in the case of nfsroot, where to find
both the server and the name of the directory on the server to mount as root.
This can be established using the following kernel command line parameters:
root=/dev/nfs
@ -49,23 +51,21 @@ root=/dev/nfs
nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
If the `nfsroot' parameter is NOT given on the command line, the default
"/tftpboot/%s" will be used.
If the `nfsroot' parameter is NOT given on the command line,
the default "/tftpboot/%s" will be used.
<server-ip> Specifies the IP address of the NFS server. If this field
is not given, the default address as determined by the
`ip' variable (see below) is used. One use of this
parameter is for example to allow using different servers
for RARP and NFS. Usually you can leave this blank.
<server-ip> Specifies the IP address of the NFS server.
The default address is determined by the `ip' parameter
(see below). This parameter allows the use of different
servers for IP autoconfiguration and NFS.
<root-dir> Name of the directory on the server to mount as root. If
there is a "%s" token in the string, the token will be
replaced by the ASCII-representation of the client's IP
address.
<root-dir> Name of the directory on the server to mount as root.
If there is a "%s" token in the string, it will be
replaced by the ASCII-representation of the client's
IP address.
<nfs-options> Standard NFS options. All options are separated by commas.
If the options field is not given, the following defaults
will be used:
The following defaults are used:
port = as given by server portmap daemon
rsize = 1024
wsize = 1024
@ -81,129 +81,174 @@ nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
This parameter tells the kernel how to configure IP addresses of devices
and also how to set up the IP routing table. It was originally called `nfsaddrs',
but now the boot-time IP configuration works independently of NFS, so it
was renamed to `ip' and the old name remained as an alias for compatibility
reasons.
and also how to set up the IP routing table. It was originally called
`nfsaddrs', but now the boot-time IP configuration works independently of
NFS, so it was renamed to `ip' and the old name remained as an alias for
compatibility reasons.
If this parameter is missing from the kernel command line, all fields are
assumed to be empty, and the defaults mentioned below apply. In general
this means that the kernel tries to configure everything using both
RARP and BOOTP (depending on what has been enabled during kernel confi-
guration, and if both what protocol answer got in first).
<client-ip> IP address of the client. If empty, the address will either
be determined by RARP or BOOTP. What protocol is used de-
pends on what has been enabled during kernel configuration
and on the <autoconf> parameter. If this parameter is not
empty, neither RARP nor BOOTP will be used.
<server-ip> IP address of the NFS server. If RARP is used to determine
the client address and this parameter is NOT empty only
replies from the specified server are accepted. To use
different RARP and NFS server, specify your RARP server
here (or leave it blank), and specify your NFS server in
the `nfsroot' parameter (see above). If this entry is blank
the address of the server is used which answered the RARP
or BOOTP request.
<gw-ip> IP address of a gateway if the server is on a different
subnet. If this entry is empty no gateway is used and the
server is assumed to be on the local network, unless a
value has been received by BOOTP.
<netmask> Netmask for local network interface. If this is empty,
the netmask is derived from the client IP address assuming
classful addressing, unless overridden in BOOTP reply.
<hostname> Name of the client. If empty, the client IP address is
used in ASCII notation, or the value received by BOOTP.
<device> Name of network device to use. If this is empty, all
devices are used for RARP and BOOTP requests, and the
first one we receive a reply on is configured. If you have
only one device, you can safely leave this blank.
<autoconf> Method to use for autoconfiguration. If this is either
'rarp' or 'bootp', the specified protocol is used.
If the value is 'both' or empty, both protocols are used
so far as they have been enabled during kernel configura-
tion. 'off' means no autoconfiguration.
this means that the kernel tries to configure everything using
autoconfiguration.
The <autoconf> parameter can appear alone as the value to the `ip'
parameter (without all the ':' characters before) in which case auto-
configuration is used.
<client-ip> IP address of the client.
Default: Determined using autoconfiguration.
<server-ip> IP address of the NFS server. If RARP is used to determine
the client address and this parameter is NOT empty only
replies from the specified server are accepted.
Only required for for NFS root. That is autoconfiguration
will not be triggered if it is missing and NFS root is not
in operation.
Default: Determined using autoconfiguration.
The address of the autoconfiguration server is used.
<gw-ip> IP address of a gateway if the server is on a different subnet.
Default: Determined using autoconfiguration.
<netmask> Netmask for local network interface. If unspecified
the netmask is derived from the client IP address assuming
classful addressing.
Default: Determined using autoconfiguration.
<hostname> Name of the client. May be supplied by autoconfiguration,
but its absence will not trigger autoconfiguration.
Default: Client IP address is used in ASCII notation.
<device> Name of network device to use.
Default: If the host only has one device, it is used.
Otherwise the device is determined using
autoconfiguration. This is done by sending
autoconfiguration requests out of all devices,
and using the device that received the first reply.
<autoconf> Method to use for autoconfiguration. In the case of options
which specify multiple autoconfiguration protocols,
requests are sent using all protocols, and the first one
to reply is used.
Only autoconfiguration protocols that have been compiled
into the kernel will be used, regardless of the value of
this option.
off or none: don't use autoconfiguration (default)
on or any: use any protocol available in the kernel
dhcp: use DHCP
bootp: use BOOTP
rarp: use RARP
both: use both BOOTP and RARP but not DHCP
(old option kept for backwards compatibility)
Default: any
3.) Kernel loader
-------------
To get the kernel into memory different approaches can be used. They
depend on what facilities are available:
3.) Boot Loader
----------
To get the kernel into memory different approaches can be used.
They depend on various facilities being available:
3.1) Writing the kernel onto a floppy using dd:
As always you can just write the kernel onto a floppy using dd,
but then it's not possible to use kernel command lines at all.
To substitute the 'root=' parameter, create a dummy device on any
linux system with major number 0 and minor number 255 using mknod:
3.1) Booting from a floppy using syslinux
mknod /dev/boot255 c 0 255
When building kernels, an easy way to create a boot floppy that uses
syslinux is to use the zdisk or bzdisk make targets which use
and bzimage images respectively. Both targets accept the
FDARGS parameter which can be used to set the kernel command line.
Then copy the kernel zImage file onto a floppy using dd:
e.g.
make bzdisk FDARGS="root=/dev/nfs"
dd if=/usr/src/linux/arch/i386/boot/zImage of=/dev/fd0
Note that the user running this command will need to have
access to the floppy drive device, /dev/fd0
And finally use rdev to set the root device:
For more information on syslinux, including how to create bootdisks
for prebuilt kernels, see http://syslinux.zytor.com/
rdev /dev/fd0 /dev/boot255
N.B: Previously it was possible to write a kernel directly to
a floppy using dd, configure the boot device using rdev, and
boot using the resulting floppy. Linux no longer supports this
method of booting.
You can then remove the dummy device /dev/boot255 again. There
is no real device available for it.
The other two kernel command line parameters cannot be substi-
tuted with rdev. Therefore, using this method the kernel will
by default use RARP and/or BOOTP, and if it gets an answer via
RARP will mount the directory /tftpboot/<client-ip>/ as its
root. If it got a BOOTP answer the directory name in that answer
is used.
3.2) Booting from a cdrom using isolinux
When building kernels, an easy way to create a bootable cdrom that
uses isolinux is to use the isoimage target which uses a bzimage
image. Like zdisk and bzdisk, this target accepts the FDARGS
parameter which can be used to set the kernel command line.
e.g.
make isoimage FDARGS="root=/dev/nfs"
The resulting iso image will be arch/<ARCH>/boot/image.iso
This can be written to a cdrom using a variety of tools including
cdrecord.
e.g.
cdrecord dev=ATAPI:1,0,0 arch/i386/boot/image.iso
For more information on isolinux, including how to create bootdisks
for prebuilt kernels, see http://syslinux.zytor.com/
3.2) Using LILO
When using LILO you can specify all necessary command line
parameters with the 'append=' command in the LILO configuration
file. However, to use the 'root=' command you also need to
set up a dummy device as described in 3.1 above. For how to use
LILO and its 'append=' command please refer to the LILO
documentation.
When using LILO all the necessary command line parameters may be
specified using the 'append=' directive in the LILO configuration
file.
However, to use the 'root=' directive you also need to create
a dummy root device, which may be removed after LILO is run.
mknod /dev/boot255 c 0 255
For information on configuring LILO, please refer to its documentation.
3.3) Using GRUB
When you use GRUB, you simply append the parameters after the kernel
specification: "kernel <kernel> <parameters>" (without the quotes).
When using GRUB, kernel parameter are simply appended after the kernel
specification: kernel <kernel> <parameters>
3.4) Using loadlin
When you want to boot Linux from a DOS command prompt without
having a local hard disk to mount as root, you can use loadlin.
I was told that it works, but haven't used it myself yet. In
general you should be able to create a kernel command line simi-
lar to how LILO is doing it. Please refer to the loadlin docu-
mentation for further information.
loadlin may be used to boot Linux from a DOS command prompt without
requiring a local hard disk to mount as root. This has not been
thoroughly tested by the authors of this document, but in general
it should be possible configure the kernel command line similarly
to the configuration of LILO.
Please refer to the loadlin documentation for further information.
3.5) Using a boot ROM
This is probably the most elegant way of booting a diskless
client. With a boot ROM the kernel gets loaded using the TFTP
protocol. As far as I know, no commercial boot ROMs yet
support booting Linux over the network, but there are two
free implementations of a boot ROM available on sunsite.unc.edu
and its mirrors. They are called 'netboot-nfs' and 'etherboot'.
Both contain everything you need to boot a diskless Linux client.
This is probably the most elegant way of booting a diskless client.
With a boot ROM the kernel is loaded using the TFTP protocol. The
authors of this document are not aware of any no commercial boot
ROMs that support booting Linux over the network. However, there
are two free implementations of a boot ROM, netboot-nfs and
etherboot, both of which are available on sunsite.unc.edu, and both
of which contain everything you need to boot a diskless Linux client.
3.6) Using pxelinux
Using pxelinux you specify the kernel you built with
Pxelinux may be used to boot linux using the PXE boot loader
which is present on many modern network cards.
When using pxelinux, the kernel image is specified using
"kernel <relative-path-below /tftpboot>". The nfsroot parameters
are passed to the kernel by adding them to the "append" line.
You may perhaps also want to fine tune the console output,
see Documentation/serial-console.txt for serial console help.
It is common to use serial console in conjunction with pxeliunx,
see Documentation/serial-console.txt for more information.
For more information on isolinux, including how to create bootdisks
for prebuilt kernels, see http://syslinux.zytor.com/

16
Documentation/powerpc/booting-without-of.txt
View File

@ -1136,10 +1136,10 @@ Sense and level information should be encoded as follows:
Devices connected to openPIC-compatible controllers should encode
sense and polarity as follows:
0 = high to low edge sensitive type enabled
0 = low to high edge sensitive type enabled
1 = active low level sensitive type enabled
2 = low to high edge sensitive type enabled
3 = active high level sensitive type enabled
2 = active high level sensitive type enabled
3 = high to low edge sensitive type enabled
ISA PIC interrupt controllers should adhere to the ISA PIC
encodings listed below:
@ -1196,7 +1196,7 @@ platforms are moved over to use the flattened-device-tree model.
- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
- compatible : Should be "gianfar"
- reg : Offset and length of the register set for the device
- address : List of bytes representing the ethernet address of
- mac-address : List of bytes representing the ethernet address of
this controller
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
@ -1216,7 +1216,7 @@ platforms are moved over to use the flattened-device-tree model.
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
address = [ 00 E0 0C 00 73 00 ];
mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>
@ -1498,7 +1498,7 @@ not necessary as they are usually the same as the root node.
model = "TSEC";
compatible = "gianfar";
reg = <24000 1000>;
address = [ 00 E0 0C 00 73 00 ];
mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <d 3 e 3 12 3>;
interrupt-parent = <40000>;
phy-handle = <2452000>;
@ -1511,7 +1511,7 @@ not necessary as they are usually the same as the root node.
model = "TSEC";
compatible = "gianfar";
reg = <25000 1000>;
address = [ 00 E0 0C 00 73 01 ];
mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <13 3 14 3 18 3>;
interrupt-parent = <40000>;
phy-handle = <2452001>;
@ -1524,7 +1524,7 @@ not necessary as they are usually the same as the root node.
model = "FEC";
compatible = "gianfar";
reg = <26000 1000>;
address = [ 00 E0 0C 00 73 02 ];
mac-address = [ 00 E0 0C 00 73 02 ];
interrupts = <19 3>;
interrupt-parent = <40000>;
phy-handle = <2452002>;

12
Documentation/ramdisk.txt
View File

@ -6,7 +6,7 @@ Contents:
1) Overview
2) Kernel Command Line Parameters
3) Using "rdev -r"
4) An Example of Creating a Compressed RAM Disk
4) An Example of Creating a Compressed RAM Disk
1) Overview
@ -34,7 +34,7 @@ make it clearer. The original "ramdisk=<ram_size>" has been kept around for
compatibility reasons, but it may be removed in the future.
The new RAM disk also has the ability to load compressed RAM disk images,
allowing one to squeeze more programs onto an average installation or
allowing one to squeeze more programs onto an average installation or
rescue floppy disk.
@ -51,7 +51,7 @@ default is 4096 (4 MB) (8192 (8 MB) on S390).
===================
This parameter tells the RAM disk driver how many bytes to use per block. The
default is 512.
default is 1024 (BLOCK_SIZE).
3) Using "rdev -r"
@ -70,7 +70,7 @@ These numbers are no magical secrets, as seen below:
./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000
./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000
Consider a typical two floppy disk setup, where you will have the
Consider a typical two floppy disk setup, where you will have the
kernel on disk one, and have already put a RAM disk image onto disk #2.
Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk
@ -97,12 +97,12 @@ Since the default start = 0 and the default prompt = 1, you could use:
append = "load_ramdisk=1"
4) An Example of Creating a Compressed RAM Disk
4) An Example of Creating a Compressed RAM Disk
----------------------------------------------
To create a RAM disk image, you will need a spare block device to
construct it on. This can be the RAM disk device itself, or an
unused disk partition (such as an unmounted swap partition). For this
unused disk partition (such as an unmounted swap partition). For this
example, we will use the RAM disk device, "/dev/ram0".
Note: This technique should not be done on a machine with less than 8 MB

123
Documentation/scsi/ChangeLog.megaraid
View File

@ -1,3 +1,126 @@
Release Date : Fri May 19 09:31:45 EST 2006 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.9 (scsi module), 2.20.2.6 (cmm module)
Older Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
1. Fixed a bug in megaraid_init_mbox().
Customer reported "garbage in file on x86_64 platform".
Root Cause: the driver registered controllers as 64-bit DMA capable
for those which are not support it.
Fix: Made change in the function inserting identification machanism
identifying 64-bit DMA capable controllers.
> -----Original Message-----
> From: Vasily Averin [mailto:vvs@sw.ru]
> Sent: Thursday, May 04, 2006 2:49 PM
> To: linux-scsi@vger.kernel.org; Kolli, Neela; Mukker, Atul;
> Ju, Seokmann; Bagalkote, Sreenivas;
> James.Bottomley@SteelEye.com; devel@openvz.org
> Subject: megaraid_mbox: garbage in file
>
> Hello all,
>
> I've investigated customers claim on the unstable work of
> their node and found a
> strange effect: reading from some files leads to the
> "attempt to access beyond end of device" messages.
>
> I've checked filesystem, memory on the node, motherboard BIOS
> version, but it
> does not help and issue still has been reproduced by simple
> file reading.
>
> Reproducer is simple:
>
> echo 0xffffffff >/proc/sys/dev/scsi/logging_level ;
> cat /vz/private/101/root/etc/ld.so.cache >/tmp/ttt ;
> echo 0 >/proc/sys/dev/scsi/logging
>
> It leads to the following messages in dmesg
>
> sd_init_command: disk=sda, block=871769260, count=26
> sda : block=871769260
> sda : reading 26/26 512 byte blocks.
> scsi_add_timer: scmd: f79ed980, time: 7500, (c02b1420)
> sd 0:1:0:0: send 0xf79ed980 sd 0:1:0:0:
> command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00
> buffer = 0xf7cfb540, bufflen = 13312, done = 0xc0366b40,
> queuecommand 0xc0344010
> leaving scsi_dispatch_cmnd()
> scsi_delete_timer: scmd: f79ed980, rtn: 1
> sd 0:1:0:0: done 0xf79ed980 SUCCESS 0 sd 0:1:0:0:
> command: Read (10): 28 00 33 f6 24 ac 00 00 1a 00
> scsi host busy 1 failed 0
> sd 0:1:0:0: Notifying upper driver of completion (result 0)
> sd_rw_intr: sda: res=0x0
> 26 sectors total, 13312 bytes done.
> use_sg is 4
> attempt to access beyond end of device
> sda6: rw=0, want=1044134458, limit=951401367
> Buffer I/O error on device sda6, logical block 522067228
> attempt to access beyond end of device
2. When INQUIRY with EVPD bit set issued to the MegaRAID controller,
system memory gets corrupted.
Root Cause: MegaRAID F/W handle the INQUIRY with EVPD bit set
incorrectly.
Fix: MegaRAID F/W has fixed the problem and being process of release,
soon. Meanwhile, driver will filter out the request.
3. One of member in the data structure of the driver leads unaligne
issue on 64-bit platform.
Customer reporeted "kernel unaligned access addrss" issue when
application communicates with MegaRAID HBA driver.
Root Cause: in uioc_t structure, one of member had misaligned and it
led system to display the error message.
Fix: A patch submitted to community from following folk.
> -----Original Message-----
> From: linux-scsi-owner@vger.kernel.org
> [mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Sakurai Hiroomi
> Sent: Wednesday, July 12, 2006 4:20 AM
> To: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org
> Subject: Re: Help: strange messages from kernel on IA64 platform
>
> Hi,
>
> I saw same message.
>
> When GAM(Global Array Manager) is started, The following
> message output.
> kernel: kernel unaligned access to 0xe0000001fe1080d4,
> ip=0xa000000200053371
>
> The uioc structure used by ioctl is defined by packed,
> the allignment of each member are disturbed.
> In a 64 bit structure, the allignment of member doesn't fit 64 bit
> boundary. this causes this messages.
> In a 32 bit structure, we don't see the message because the allinment
> of member fit 32 bit boundary even if packed is specified.
>
> patch
> I Add 32 bit dummy member to fit 64 bit boundary. I tested.
> We confirmed this patch fix the problem by IA64 server.
>
> **************************************************************
> ****************
> --- linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h.orig
> 2006-04-03 17:13:03.000000000 +0900
> +++ linux-2.6.9/drivers/scsi/megaraid/megaraid_ioctl.h
> 2006-04-03 17:14:09.000000000 +0900
> @@ -132,6 +132,10 @@
> /* Driver Data: */
> void __user * user_data;
> uint32_t user_data_len;
> +
> + /* 64bit alignment */
> + uint32_t pad_0xBC;
> +
> mraid_passthru_t __user *user_pthru;
>
> mraid_passthru_t *pthru32;
> **************************************************************
> ****************
Release Date : Mon Apr 11 12:27:22 EST 2006 - Seokmann Ju <sju@lsil.com>
Current Version : 2.20.4.8 (scsi module), 2.20.2.6 (cmm module)
Older Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)

4
Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
View File

@ -1172,7 +1172,7 @@
}
/* PCI IDs */
static struct pci_device_id snd_mychip_ids[] __devinitdata = {
static struct pci_device_id snd_mychip_ids[] = {
{ PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
....
@ -1565,7 +1565,7 @@
<informalexample>
<programlisting>
<![CDATA[
static struct pci_device_id snd_mychip_ids[] __devinitdata = {
static struct pci_device_id snd_mychip_ids[] = {
{ PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
....

20
Documentation/sysctl/fs.txt
View File

@ -25,6 +25,7 @@ Currently, these files are in /proc/sys/fs:
- inode-state
- overflowuid
- overflowgid
- suid_dumpable
- super-max
- super-nr
@ -131,6 +132,25 @@ The default is 65534.
==============================================================
suid_dumpable:
This value can be used to query and set the core dump mode for setuid
or otherwise protected/tainted binaries. The modes are
0 - (default) - traditional behaviour. Any process which has changed
privilege levels or is execute only will not be dumped
1 - (debug) - all processes dump core when possible. The core dump is
owned by the current user and no security is applied. This is
intended for system debugging situations only. Ptrace is unchecked.
2 - (suidsafe) - any binary which normally would not be dumped is dumped
readable by root only. This allows the end user to remove
such a dump but not access it directly. For security reasons
core dumps in this mode will not overwrite one another or
other files. This mode is appropriate when adminstrators are
attempting to debug problems in a normal environment.
==============================================================
super-max & super-nr:
These numbers control the maximum number of superblocks, and

25
Documentation/sysctl/kernel.txt
View File

@ -50,7 +50,6 @@ show up in /proc/sys/kernel:
- shmmax [ sysv ipc ]
- shmmni
- stop-a [ SPARC only ]
- suid_dumpable
- sysrq ==> Documentation/sysrq.txt
- tainted
- threads-max
@ -211,9 +210,8 @@ Controls the kernel's behaviour when an oops or BUG is encountered.
0: try to continue operation
1: delay a few seconds (to give klogd time to record the oops output) and
then panic. If the `panic' sysctl is also non-zero then the machine will
be rebooted.
1: panic immediatly. If the `panic' sysctl is also non-zero then the
machine will be rebooted.
==============================================================
@ -311,25 +309,6 @@ kernel. This value defaults to SHMMAX.
==============================================================
suid_dumpable:
This value can be used to query and set the core dump mode for setuid
or otherwise protected/tainted binaries. The modes are
0 - (default) - traditional behaviour. Any process which has changed
privilege levels or is execute only will not be dumped
1 - (debug) - all processes dump core when possible. The core dump is
owned by the current user and no security is applied. This is
intended for system debugging situations only. Ptrace is unchecked.
2 - (suidsafe) - any binary which normally would not be dumped is dumped
readable by root only. This allows the end user to remove
such a dump but not access it directly. For security reasons
core dumps in this mode will not overwrite one another or
other files. This mode is appropriate when adminstrators are
attempting to debug problems in a normal environment.
==============================================================
tainted:
Non-zero if the kernel has been tainted. Numeric values, which

2
Documentation/usb/proc_usb_info.txt
View File

@ -59,7 +59,7 @@ bind to an interface (or perhaps several) using an ioctl call. You
would issue more ioctls to the device to communicate to it using
control, bulk, or other kinds of USB transfers. The IOCTLs are
listed in the <linux/usbdevice_fs.h> file, and at this writing the
source code (linux/drivers/usb/devio.c) is the primary reference
source code (linux/drivers/usb/core/devio.c) is the primary reference
for how to access devices through those files.
Note that since by default these BBB/DDD files are writable only by

3
Documentation/usb/usb-help.txt
View File

@ -5,8 +5,7 @@ For USB help other than the readme files that are located in
Documentation/usb/*, see the following:
Linux-USB project: http://www.linux-usb.org
mirrors at http://www.suse.cz/development/linux-usb/
and http://usb.in.tum.de/linux-usb/
mirrors at http://usb.in.tum.de/linux-usb/
and http://it.linux-usb.org
Linux USB Guide: http://linux-usb.sourceforge.net
Linux-USB device overview (working devices and drivers):

4
Documentation/usb/usb-serial.txt
View File

@ -399,10 +399,10 @@ REINER SCT cyberJack pinpad/e-com USB chipcard reader
Prolific PL2303 Driver
This driver support any device that has the PL2303 chip from Prolific
This driver supports any device that has the PL2303 chip from Prolific
in it. This includes a number of single port USB to serial
converters and USB GPS devices. Devices from Aten (the UC-232) and
IO-Data work with this driver.
IO-Data work with this driver, as does the DCU-11 mobile-phone cable.
For any questions or problems with this driver, please contact Greg
Kroah-Hartman at greg@kroah.com

7
Documentation/x86_64/boot-options.txt
View File

@ -238,6 +238,13 @@ Debugging
pagefaulttrace Dump all page faults. Only useful for extreme debugging
and will create a lot of output.
call_trace=[old|both|newfallback|new]
old: use old inexact backtracer
new: use new exact dwarf2 unwinder
both: print entries from both
newfallback: use new unwinder but fall back to old if it gets
stuck (default)
Misc
noreplacement Don't replace instructions with more appropriate ones

123
MAINTAINERS
View File

@ -214,6 +214,12 @@ W: http://acpi.sourceforge.net/
T: git kernel.org:/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
S: Maintained
ACPI PCI HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: pcihpd-discuss@lists.sourceforge.net
S: Maintained
AD1816 SOUND DRIVER
P: Thorsten Knabe
M: Thorsten Knabe <linux@thorsten-knabe.de>
@ -274,7 +280,7 @@ S: Maintained
ALI1563 I2C DRIVER
P: Rudolf Marek
M: r.marek@sh.cvut.cz
L: lm-sensors@lm-sensors.org
L: i2c@lm-sensors.org
S: Maintained
ALPHA PORT
@ -292,6 +298,13 @@ L: info-linux@geode.amd.com
W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
S: Supported
AOA (Apple Onboard Audio) ALSA DRIVER
P: Johannes Berg
M: johannes@sipsolutions.net
L: linuxppc-dev@ozlabs.org
L: alsa-devel@alsa-project.org
S: Maintained
APM DRIVER
P: Stephen Rothwell
M: sfr@canb.auug.org.au
@ -403,7 +416,7 @@ S: Supported
ATM
P: Chas Williams
M: chas@cmf.nrl.navy.mil
L: linux-atm-general@lists.sourceforge.net
L: linux-atm-general@lists.sourceforge.net (subscribers-only)
W: http://linux-atm.sourceforge.net
S: Maintained
@ -601,6 +614,15 @@ W: http://linuxtv.org
T: git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
S: Maintained
CALGARY x86-64 IOMMU
P: Muli Ben-Yehuda
M: muli@il.ibm.com
P: Jon D. Mason
M: jdmason@us.ibm.com
L: linux-kernel@vger.kernel.org
L: discuss@x86-64.org
S: Maintained
COMMON INTERNET FILE SYSTEM (CIFS)
P: Steve French
M: sfrench@samba.org
@ -762,6 +784,7 @@ M: aliakc@web.de
P: Jamie Lenehan
M: lenehan@twibble.org
W: http://twibble.org/dist/dc395x/
L: dc395x@twibble.org
L: http://lists.twibble.org/mailman/listinfo/dc395x/
S: Maintained
@ -866,6 +889,12 @@ M: rdunlap@xenotime.net
T: git http://tali.admingilde.org/git/linux-docbook.git
S: Maintained
DOCKING STATION DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
L: linux-acpi@vger.kernel.org
S: Maintained
DOUBLETALK DRIVER
P: James R. Van Zandt
M: jrv@vanzandt.mv.com
@ -958,6 +987,10 @@ P: Andrey V. Savochkin
M: saw@saw.sw.com.sg
S: Maintained
EFS FILESYSTEM
W: http://aeschi.ch.eu.org/efs/
S: Orphan
EMU10K1 SOUND DRIVER
P: James Courtier-Dutton
M: James@superbug.demon.co.uk
@ -1240,7 +1273,7 @@ S: Maintained
I2C SUBSYSTEM
P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
L: i2c@lm-sensors.org
W: http://www.lm-sensors.nu/
T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
S: Maintained
@ -1492,6 +1525,7 @@ P: Yi Zhu
M: yi.zhu@intel.com
P: James Ketrenos
M: jketreno@linux.intel.com
L: ipw2100-devel@lists.sourceforge.net
L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2100.sourceforge.net
S: Supported
@ -1501,6 +1535,7 @@ P: Yi Zhu
M: yi.zhu@intel.com
P: James Ketrenos
M: jketreno@linux.intel.com
L: ipw2100-devel@lists.sourceforge.net
L: http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
W: http://ipw2200.sourceforge.net
S: Supported
@ -1586,7 +1621,7 @@ W: http://jfs.sourceforge.net/
T: git kernel.org:/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
S: Supported
JOURNALLING LAYER FOR BLOCK DEVICS (JBD)
JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
P: Stephen Tweedie, Andrew Morton
M: sct@redhat.com, akpm@osdl.org
L: ext2-devel@lists.sourceforge.net
@ -1630,9 +1665,8 @@ S: Maintained
KERNEL JANITORS
P: Several
L: kernel-janitors@osdl.org
L: kernel-janitors@lists.osdl.org
W: http://www.kerneljanitors.org/
W: http://sf.net/projects/kernel-janitor/
S: Maintained
KERNEL NFSD
@ -1664,10 +1698,8 @@ L: linux-kernel@vger.kernel.org
S: Maintained
LAPB module
P: Henner Eisen
M: eis@baty.hanse.de
L: linux-x25@vger.kernel.org
S: Maintained
S: Orphan
LASI 53c700 driver for PARISC
P: James E.J. Bottomley
@ -1872,6 +1904,12 @@ S: linux-scsi@vger.kernel.org
W: http://megaraid.lsilogic.com
S: Maintained
MEMORY MANAGEMENT
L: linux-mm@kvack.org
L: linux-kernel@vger.kernel.org
W: http://www.linux-mm.org
S: Maintained
MEMORY TECHNOLOGY DEVICES (MTD)
P: David Woodhouse
M: dwmw2@infradead.org
@ -2039,9 +2077,10 @@ L: linux-kernel@vger.kernel.org
S: Maintained
NI5010 NETWORK DRIVER
P: Jan-Pascal van Best and Andreas Mohr
M: Jan-Pascal van Best <jvbest@qv3pluto.leidenuniv.nl>
M: Andreas Mohr <100.30936@germany.net>
P: Jan-Pascal van Best
M: janpascal@vanbest.org
P: Andreas Mohr
M: andi@lisas.de
L: netdev@vger.kernel.org
S: Maintained
@ -2083,7 +2122,7 @@ S: Maintained
OPENCORES I2C BUS DRIVER
P: Peter Korsgaard
M: jacmet@sunsite.dk
L: lm-sensors@lm-sensors.org
L: i2c@lm-sensors.org
S: Maintained
ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
@ -2216,6 +2255,7 @@ S: Maintained
PCMCIA SUBSYSTEM
P: Linux PCMCIA Team
L: linux-pcmcia@lists.infradead.org
L: http://lists.infradead.org/mailman/listinfo/linux-pcmcia
T: git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
S: Maintained
@ -2226,6 +2266,12 @@ M: tsbogend@alpha.franken.de
L: netdev@vger.kernel.org
S: Maintained
PER-TASK DELAY ACCOUNTING
P: Shailabh Nagar
M: nagar@watson.ibm.com
L: linux-kernel@vger.kernel.org
S: Maintained
PERSONALITY HANDLING
P: Christoph Hellwig
M: hch@infradead.org
@ -2608,6 +2654,22 @@ M: dbrownell@users.sourceforge.net
L: spi-devel-general@lists.sourceforge.net
S: Maintained
STABLE BRANCH:
P: Greg Kroah-Hartman
M: greg@kroah.com
P: Chris Wright
M: chrisw@sous-sol.org
L: stable@kernel.org
S: Maintained
STABLE BRANCH:
P: Greg Kroah-Hartman
M: greg@kroah.com
P: Chris Wright
M: chrisw@sous-sol.org
L: stable@kernel.org
S: Maintained
TPM DEVICE DRIVER
P: Kylene Hall
M: kjhall@us.ibm.com
@ -2665,6 +2727,11 @@ M: shemminger@osdl.org
L: netdev@vger.kernel.org
S: Maintained
SOEKRIS NET48XX LED SUPPORT
P: Chris Boot
M: bootc@bootc.net
S: Maintained
SPARC (sparc32):
P: William L. Irwin
M: wli@holomorphy.com
@ -2737,11 +2804,31 @@ P: Christoph Hellwig
M: hch@infradead.org
S: Maintained
TC CLASSIFIER
P: Jamal Hadi Salim
M: hadi@cyberus.ca
L: netdev@vger.kernel.org
S: Maintained
TCP LOW PRIORITY MODULE
P: Wong Hoi Sing, Edison
M: hswong3i@gmail.com
P: Hung Hing Lun, Mike
M: hlhung3i@gmail.com
W: http://tcp-lp-mod.sourceforge.net/
S: Maintained
TI OMAP RANDOM NUMBER GENERATOR SUPPORT
P: Deepak Saxena
M: dsaxena@plexity.net
S: Maintained
TASKSTATS STATISTICS INTERFACE
P: Shailabh Nagar
M: nagar@watson.ibm.com
L: linux-kernel@vger.kernel.org
S: Maintained
TI PARALLEL LINK CABLE DRIVER
P: Romain Lievin
M: roms@lpg.ticalc.org
@ -3117,7 +3204,7 @@ S: Maintained
VIAPRO SMBUS DRIVER
P: Jean Delvare
M: khali@linux-fr.org
L: lm-sensors@lm-sensors.org
L: i2c@lm-sensors.org
S: Maintained
UCLINUX (AND M68KNOMMU)
@ -3165,6 +3252,11 @@ S: Maintained
W1 DALLAS'S 1-WIRE BUS
P: Evgeniy Polyakov
M: johnpol@2ka.mipt.ru
S: Maintained
W83791D HARDWARE MONITORING DRIVER
P: Charles Spirakis
M: bezaur@gmail.com
L: lm-sensors@lm-sensors.org
S: Maintained
@ -3212,10 +3304,11 @@ S: Maintained
XFS FILESYSTEM
P: Silicon Graphics Inc
P: Tim Shimmin, David Chatterton
M: xfs-masters@oss.sgi.com
M: nathans@sgi.com
L: xfs@oss.sgi.com
W: http://oss.sgi.com/projects/xfs
T: git git://oss.sgi.com:8090/xfs/xfs-2.6
S: Supported
X86 3-LEVEL PAGING (PAE) SUPPORT

43
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 17
EXTRAVERSION =
SUBLEVEL = 18
EXTRAVERSION = -rc7
NAME=Crazed Snow-Weasel
# *DOCUMENTATION*
@ -309,9 +309,6 @@ CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common
# Force gcc to behave correct even for buggy distributions
CFLAGS += $(call cc-option, -fno-stack-protector-all \
-fno-stack-protector)
AFLAGS := -D__ASSEMBLY__
# Read KERNELRELEASE from include/config/kernel.release (if it exists)
@ -368,6 +365,7 @@ endif
no-dot-config-targets := clean mrproper distclean \
cscope TAGS tags help %docs check% \
include/linux/version.h headers_% \
kernelrelease kernelversion
config-targets := 0
@ -435,12 +433,13 @@ core-y := usr/
endif # KBUILD_EXTMOD
ifeq ($(dot-config),1)
# In this section, we need .config
# Read in config
-include include/config/auto.conf
ifeq ($(KBUILD_EXTMOD),)
# Read in dependencies to all Kconfig* files, make sure to run
# oldconfig if changes are detected.
-include include/config/auto.conf.cmd
-include include/config/auto.conf
# To avoid any implicit rule to kick in, define an empty command
$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
@ -450,16 +449,27 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ;
# if auto.conf.cmd is missing then we are probably in a cleaned tree so
# we execute the config step to be sure to catch updated Kconfig files
include/config/auto.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
ifeq ($(KBUILD_EXTMOD),)
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
else
$(error kernel configuration not valid - run 'make prepare' in $(srctree) to update it)
endif
# external modules needs include/linux/autoconf.h and include/config/auto.conf
# but do not care if they are up-to-date. Use auto.conf to trigger the test
PHONY += include/config/auto.conf
include/config/auto.conf:
$(Q)test -e include/linux/autoconf.h -a -e $@ || ( \
echo; \
echo " ERROR: Kernel configuration is invalid."; \
echo " include/linux/autoconf.h or $@ are missing."; \
echo " Run 'make oldconfig && make prepare' on kernel src to fix it."; \
echo; \
/bin/false)
endif # KBUILD_EXTMOD
else
# Dummy target needed, because used as prerequisite
include/config/auto.conf: ;
endif
endif # $(dot-config)
# The all: target is the default when no target is given on the
# command line.
@ -473,6 +483,8 @@ else
CFLAGS += -O2
endif
include $(srctree)/arch/$(ARCH)/Makefile
ifdef CONFIG_FRAME_POINTER
CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
else
@ -487,7 +499,8 @@ ifdef CONFIG_DEBUG_INFO
CFLAGS += -g
endif
include $(srctree)/arch/$(ARCH)/Makefile
# Force gcc to behave correct even for buggy distributions
CFLAGS += $(call cc-option, -fno-stack-protector)
# arch Makefile may override CC so keep this after arch Makefile is included
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
@ -876,7 +889,7 @@ depend dep:
# ---------------------------------------------------------------------------
# Kernel headers
INSTALL_HDR_PATH=$(MODLIB)/abi
INSTALL_HDR_PATH=$(objtree)/usr
export INSTALL_HDR_PATH
PHONY += headers_install
@ -973,7 +986,7 @@ CLEAN_FILES += vmlinux System.map \
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include2
MRPROPER_DIRS += include/config include2 usr/include
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
include/linux/autoconf.h include/linux/version.h \
include/linux/utsrelease.h \
@ -1064,7 +1077,7 @@ help:
@echo ' kernelrelease - Output the release version string'
@echo ' kernelversion - Output the version stored in Makefile'
@echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'
@echo ' (default: /lib/modules/$$VERSION/abi)'
@echo ' (default: $(INSTALL_HDR_PATH))'
@echo ''
@echo 'Static analysers'
@echo ' checkstack - Generate a list of stack hogs'

1
arch/alpha/kernel/alpha_ksyms.c
View File

@ -14,6 +14,7 @@
#include <linux/in.h>
#include <linux/in6.h>
#include <linux/pci.h>
#include <linux/screen_info.h>
#include <linux/tty.h>
#include <linux/mm.h>
#include <linux/delay.h>

8
arch/alpha/kernel/err_ev7.c
View File

@ -274,16 +274,14 @@ ev7_process_pal_subpacket(struct el_subpacket *header)
struct el_subpacket_handler ev7_pal_subpacket_handler =
SUBPACKET_HANDLER_INIT(EL_CLASS__PAL, ev7_process_pal_subpacket);
void
void
ev7_register_error_handlers(void)
{
int i;
for(i = 0;
i<sizeof(el_ev7_pal_annotations)/sizeof(el_ev7_pal_annotations[1]);
i++) {
for (i = 0; i < ARRAY_SIZE(el_ev7_pal_annotations); i++)
cdl_register_subpacket_annotation(&el_ev7_pal_annotations[i]);
}
cdl_register_subpacket_handler(&ev7_pal_subpacket_handler);
}

4
arch/alpha/kernel/osf_sys.c
View File

@ -623,12 +623,12 @@ osf_sysinfo(int command, char __user *buf, long count)
long len, err = -EINVAL;
offset = command-1;
if (offset >= sizeof(sysinfo_table)/sizeof(char *)) {
if (offset >= ARRAY_SIZE(sysinfo_table)) {
/* Digital UNIX has a few unpublished interfaces here */
printk("sysinfo(%d)", command);
goto out;
}
down_read(&uts_sem);
res = sysinfo_table[offset];
len = strlen(res)+1;

1
arch/alpha/kernel/process.c
View File

@ -25,6 +25,7 @@
#include <linux/time.h>
#include <linux/major.h>
#include <linux/stat.h>
#include <linux/vt.h>
#include <linux/mman.h>
#include <linux/elfcore.h>
#include <linux/reboot.h>

52
arch/alpha/kernel/setup.c
View File

@ -19,7 +19,7 @@
#include <linux/slab.h>
#include <linux/user.h>
#include <linux/a.out.h>
#include <linux/tty.h>
#include <linux/screen_info.h>
#include <linux/delay.h>
#include <linux/config.h> /* CONFIG_ALPHA_LCA etc */
#include <linux/mc146818rtc.h>
@ -114,8 +114,6 @@ struct alpha_machine_vector alpha_mv;
int alpha_using_srm;
#endif
#define N(a) (sizeof(a)/sizeof(a[0]))
static struct alpha_machine_vector *get_sysvec(unsigned long, unsigned long,
unsigned long);
static struct alpha_machine_vector *get_sysvec_byname(const char *);
@ -240,7 +238,7 @@ reserve_std_resources(void)
standard_io_resources[0].start = RTC_PORT(0);
standard_io_resources[0].end = RTC_PORT(0) + 0x10;
for (i = 0; i < N(standard_io_resources); ++i)
for (i = 0; i < ARRAY_SIZE(standard_io_resources); ++i)
request_resource(io, standard_io_resources+i);
}
@ -918,13 +916,13 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
/* Search the system tables first... */
vec = NULL;
if (type < N(systype_vecs)) {
if (type < ARRAY_SIZE(systype_vecs)) {
vec = systype_vecs[type];
} else if ((type > ST_API_BIAS) &&
(type - ST_API_BIAS) < N(api_vecs)) {
(type - ST_API_BIAS) < ARRAY_SIZE(api_vecs)) {
vec = api_vecs[type - ST_API_BIAS];
} else if ((type > ST_UNOFFICIAL_BIAS) &&
(type - ST_UNOFFICIAL_BIAS) < N(unofficial_vecs)) {
(type - ST_UNOFFICIAL_BIAS) < ARRAY_SIZE(unofficial_vecs)) {
vec = unofficial_vecs[type - ST_UNOFFICIAL_BIAS];
}
@ -938,11 +936,11 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
switch (type) {
case ST_DEC_ALCOR:
if (member < N(alcor_indices))
if (member < ARRAY_SIZE(alcor_indices))
vec = alcor_vecs[alcor_indices[member]];
break;
case ST_DEC_EB164:
if (member < N(eb164_indices))
if (member < ARRAY_SIZE(eb164_indices))
vec = eb164_vecs[eb164_indices[member]];
/* PC164 may show as EB164 variation with EV56 CPU,
but, since no true EB164 had anything but EV5... */
@ -950,24 +948,24 @@ get_sysvec(unsigned long type, unsigned long variation, unsigned long cpu)
vec = &pc164_mv;
break;
case ST_DEC_EB64P:
if (member < N(eb64p_indices))
if (member < ARRAY_SIZE(eb64p_indices))
vec = eb64p_vecs[eb64p_indices[member]];
break;
case ST_DEC_EB66:
if (member < N(eb66_indices))
if (member < ARRAY_SIZE(eb66_indices))
vec = eb66_vecs[eb66_indices[member]];
break;
case ST_DEC_MARVEL:
if (member < N(marvel_indices))
if (member < ARRAY_SIZE(marvel_indices))
vec = marvel_vecs[marvel_indices[member]];
break;
case ST_DEC_TITAN:
vec = titan_vecs[0]; /* default */
if (member < N(titan_indices))
if (member < ARRAY_SIZE(titan_indices))
vec = titan_vecs[titan_indices[member]];
break;
case ST_DEC_TSUNAMI:
if (member < N(tsunami_indices))
if (member < ARRAY_SIZE(tsunami_indices))
vec = tsunami_vecs[tsunami_indices[member]];
break;
case ST_DEC_1000:
@ -1039,7 +1037,7 @@ get_sysvec_byname(const char *name)
size_t i;
for (i = 0; i < N(all_vecs); ++i) {
for (i = 0; i < ARRAY_SIZE(all_vecs); ++i) {
struct alpha_machine_vector *mv = all_vecs[i];
if (strcasecmp(mv->vector_name, name) == 0)
return mv;
@ -1055,13 +1053,13 @@ get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
/* If not in the tables, make it UNKNOWN,
else set type name to family */
if (type < N(systype_names)) {
if (type < ARRAY_SIZE(systype_names)) {
*type_name = systype_names[type];
} else if ((type > ST_API_BIAS) &&
(type - ST_API_BIAS) < N(api_names)) {
(type - ST_API_BIAS) < ARRAY_SIZE(api_names)) {
*type_name = api_names[type - ST_API_BIAS];
} else if ((type > ST_UNOFFICIAL_BIAS) &&
(type - ST_UNOFFICIAL_BIAS) < N(unofficial_names)) {
(type - ST_UNOFFICIAL_BIAS) < ARRAY_SIZE(unofficial_names)) {
*type_name = unofficial_names[type - ST_UNOFFICIAL_BIAS];
} else {
*type_name = sys_unknown;
@ -1083,7 +1081,7 @@ get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
default: /* default to variation "0" for now */
break;
case ST_DEC_EB164:
if (member < N(eb164_indices))
if (member < ARRAY_SIZE(eb164_indices))
*variation_name = eb164_names[eb164_indices[member]];
/* PC164 may show as EB164 variation, but with EV56 CPU,
so, since no true EB164 had anything but EV5... */
@ -1091,32 +1089,32 @@ get_sysnames(unsigned long type, unsigned long variation, unsigned long cpu,
*variation_name = eb164_names[1]; /* make it PC164 */
break;
case ST_DEC_ALCOR:
if (member < N(alcor_indices))
if (member < ARRAY_SIZE(alcor_indices))
*variation_name = alcor_names[alcor_indices[member]];
break;
case ST_DEC_EB64P:
if (member < N(eb64p_indices))
if (member < ARRAY_SIZE(eb64p_indices))
*variation_name = eb64p_names[eb64p_indices[member]];
break;
case ST_DEC_EB66:
if (member < N(eb66_indices))
if (member < ARRAY_SIZE(eb66_indices))
*variation_name = eb66_names[eb66_indices[member]];
break;
case ST_DEC_MARVEL:
if (member < N(marvel_indices))
if (member < ARRAY_SIZE(marvel_indices))
*variation_name = marvel_names[marvel_indices[member]];
break;
case ST_DEC_RAWHIDE:
if (member < N(rawhide_indices))
if (member < ARRAY_SIZE(rawhide_indices))
*variation_name = rawhide_names[rawhide_indices[member]];
break;
case ST_DEC_TITAN:
*variation_name = titan_names[0]; /* default */
if (member < N(titan_indices))
if (member < ARRAY_SIZE(titan_indices))
*variation_name = titan_names[titan_indices[member]];
break;
case ST_DEC_TSUNAMI:
if (member < N(tsunami_indices))
if (member < ARRAY_SIZE(tsunami_indices))
*variation_name = tsunami_names[tsunami_indices[member]];
break;
}
@ -1211,7 +1209,7 @@ show_cpuinfo(struct seq_file *f, void *slot)
cpu_index = (unsigned) (cpu->type - 1);
cpu_name = "Unknown";
if (cpu_index < N(cpu_names))
if (cpu_index < ARRAY_SIZE(cpu_names))
cpu_name = cpu_names[cpu_index];
get_sysnames(hwrpb->sys_type, hwrpb->sys_variation,

8
arch/alpha/kernel/sys_ruffian.c
View File

@ -182,16 +182,16 @@ static unsigned long __init
ruffian_get_bank_size(unsigned long offset)
{
unsigned long bank_addr, bank, ret = 0;
/* Valid offsets are: 0x800, 0x840 and 0x880
since Ruffian only uses three banks. */
bank_addr = (unsigned long)PYXIS_MCR + offset;
bank = *(vulp)bank_addr;
/* Check BANK_ENABLE */
if (bank & 0x01) {
static unsigned long size[] __initdata = {
0x40000000UL, /* 0x00, 1G */
0x40000000UL, /* 0x00, 1G */
0x20000000UL, /* 0x02, 512M */
0x10000000UL, /* 0x04, 256M */
0x08000000UL, /* 0x06, 128M */
@ -203,7 +203,7 @@ ruffian_get_bank_size(unsigned long offset)
};
bank = (bank & 0x1e) >> 1;
if (bank < sizeof(size)/sizeof(*size))
if (bank < ARRAY_SIZE(size))
ret = size[bank];
}

2
arch/alpha/kernel/sys_sio.c
View File

@ -16,7 +16,7 @@
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/screen_info.h>
#include <asm/compiler.h>
#include <asm/ptrace.h>

2
arch/alpha/kernel/time.c
View File

@ -233,7 +233,7 @@ validate_cc_value(unsigned long cc)
index = cpu->type & 0xffffffff;
/* If index out of bounds, no way to validate. */
if (index >= sizeof(cpu_hz)/sizeof(cpu_hz[0]))
if (index >= ARRAY_SIZE(cpu_hz))
return cc;
/* If index contains no data, no way to validate. */

3
arch/arm/Makefile
View File

@ -47,7 +47,8 @@ comma = ,
# testing for a specific architecture or later rather impossible.
arch-$(CONFIG_CPU_32v6) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
arch-$(CONFIG_CPU_32v6K) :=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
arch-$(CONFIG_CPU_32v4T) :=-D__LINUX_ARM_ARCH__=4 -march=armv4t
arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3

8
arch/arm/common/dmabounce.c
View File

@ -179,17 +179,19 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
static inline struct safe_buffer *
find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr)
{
struct safe_buffer *b = NULL;
struct safe_buffer *b, *rb = NULL;
unsigned long flags;
read_lock_irqsave(&device_info->lock, flags);
list_for_each_entry(b, &device_info->safe_buffers, node)
if (b->safe_dma_addr == safe_dma_addr)
if (b->safe_dma_addr == safe_dma_addr) {
rb = b;
break;
}
read_unlock_irqrestore(&device_info->lock, flags);
return b;
return rb;
}
static inline void

3
arch/arm/common/gic.c
View File

@ -95,7 +95,8 @@ static void gic_set_cpu(unsigned int irq, cpumask_t mask_val)
}
#endif
static struct irqchip gic_chip = {
static struct irq_chip gic_chip = {
.name = "GIC",
.ack = gic_ack_irq,
.mask = gic_mask_irq,
.unmask = gic_unmask_irq,

18
arch/arm/common/locomo.c
View File

@ -204,7 +204,8 @@ static void locomo_unmask_irq(unsigned int irq)
locomo_writel(r, mapbase + LOCOMO_ICR);
}
static struct irqchip locomo_chip = {
static struct irq_chip locomo_chip = {
.name = "LOCOMO",
.ack = locomo_ack_irq,
.mask = locomo_mask_irq,
.unmask = locomo_unmask_irq,
@ -249,7 +250,8 @@ static void locomo_key_unmask_irq(unsigned int irq)
locomo_writel(r, mapbase + LOCOMO_KEYBOARD + LOCOMO_KIC);
}
static struct irqchip locomo_key_chip = {
static struct irq_chip locomo_key_chip = {
.name = "LOCOMO-key",
.ack = locomo_key_ack_irq,
.mask = locomo_key_mask_irq,
.unmask = locomo_key_unmask_irq,
@ -312,7 +314,8 @@ static void locomo_gpio_unmask_irq(unsigned int irq)
locomo_writel(r, mapbase + LOCOMO_GIE);
}
static struct irqchip locomo_gpio_chip = {
static struct irq_chip locomo_gpio_chip = {
.name = "LOCOMO-gpio",
.ack = locomo_gpio_ack_irq,
.mask = locomo_gpio_mask_irq,
.unmask = locomo_gpio_unmask_irq,
@ -357,7 +360,8 @@ static void locomo_lt_unmask_irq(unsigned int irq)
locomo_writel(r, mapbase + LOCOMO_LTINT);
}
static struct irqchip locomo_lt_chip = {
static struct irq_chip locomo_lt_chip = {
.name = "LOCOMO-lt",
.ack = locomo_lt_ack_irq,
.mask = locomo_lt_mask_irq,
.unmask = locomo_lt_unmask_irq,
@ -418,7 +422,8 @@ static void locomo_spi_unmask_irq(unsigned int irq)
locomo_writel(r, mapbase + LOCOMO_SPIIE);
}
static struct irqchip locomo_spi_chip = {
static struct irq_chip locomo_spi_chip = {
.name = "LOCOMO-spi",
.ack = locomo_spi_ack_irq,
.mask = locomo_spi_mask_irq,
.unmask = locomo_spi_unmask_irq,
@ -506,7 +511,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
goto out;
}
strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id));
strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
/*
* If the parent device has a DMA mask associated with it,
* propagate it down to the children.
@ -729,7 +734,6 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
locomo_init_one_child(lchip, &locomo_devices[i]);
return 0;
out:

1
arch/arm/common/rtctime.c
View File

@ -68,6 +68,7 @@ void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc
rtc_time_to_tm(next_time, next);
}
}
EXPORT_SYMBOL(rtc_next_alarm_time);
static inline int rtc_arm_read_time(struct rtc_ops *ops, struct rtc_time *tm)
{

12
arch/arm/common/sa1111.c
View File

@ -272,7 +272,8 @@ static int sa1111_wake_lowirq(unsigned int irq, unsigned int on)
return 0;
}
static struct irqchip sa1111_low_chip = {
static struct irq_chip sa1111_low_chip = {
.name = "SA1111-l",
.ack = sa1111_ack_irq,
.mask = sa1111_mask_lowirq,
.unmask = sa1111_unmask_lowirq,
@ -368,7 +369,8 @@ static int sa1111_wake_highirq(unsigned int irq, unsigned int on)
return 0;
}
static struct irqchip sa1111_high_chip = {
static struct irq_chip sa1111_high_chip = {
.name = "SA1111-h",
.ack = sa1111_ack_irq,
.mask = sa1111_mask_highirq,
.unmask = sa1111_unmask_highirq,
@ -616,7 +618,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
{
struct sa1111 *sachip;
unsigned long id;
unsigned int has_devs, val;
unsigned int has_devs;
int i, ret = -ENODEV;
sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
@ -667,6 +669,9 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
sa1111_wake(sachip);
#ifdef CONFIG_ARCH_SA1100
{
unsigned int val;
/*
* The SDRAM configuration of the SA1110 and the SA1111 must
* match. This is very important to ensure that SA1111 accesses
@ -690,6 +695,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
* Enable the SA1110 memory bus request and grant signals.
*/
sa1110_mb_enable();
}
#endif
/*

4
arch/arm/common/sharpsl_pm.c
View File

@ -412,8 +412,10 @@ static int sharpsl_check_battery_temp(void)
val = get_select_val(buff);
dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
if (val > sharpsl_pm.machinfo->charge_on_temp)
if (val > sharpsl_pm.machinfo->charge_on_temp) {
printk(KERN_WARNING "Not charging: temperature out of limits.\n");
return -1;
}
return 0;
}

3
arch/arm/common/vic.c
View File

@ -39,7 +39,8 @@ static void vic_unmask_irq(unsigned int irq)
writel(1 << irq, base + VIC_INT_ENABLE);
}
static struct irqchip vic_chip = {
static struct irq_chip vic_chip = {
.name = "VIC",
.ack = vic_mask_irq,
.mask = vic_mask_irq,
.unmask = vic_unmask_irq,

37
arch/arm/configs/csb337_defconfig
View File

@ -621,9 +621,8 @@ CONFIG_AT91_WATCHDOG=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_AT91_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@ -956,9 +955,41 @@ CONFIG_USB_AT91=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=y
# CONFIG_MMC_WBSD is not set
CONFIG_MMC_AT91RM9200=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_DS1307=y
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_AT91=y
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# File systems
#

75
arch/arm/configs/ep93xx_defconfig
View File

@ -1,14 +1,18 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-rc2
# Wed Apr 19 21:21:01 2006
# Linux kernel version: 2.6.18-rc1-git9
# Sat Jul 15 15:08:10 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@ -26,6 +30,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
@ -43,14 +48,15 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@ -83,18 +89,26 @@ CONFIG_DEFAULT_IOSCHED="deadline"
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
CONFIG_ARCH_EP93XX=y
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@ -102,20 +116,18 @@ CONFIG_ARCH_EP93XX=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_AT91RM9200 is not set
#
# Cirrus EP93xx Implementation Options
#
CONFIG_CRUNCH=y
#
# EP93xx Platforms
#
CONFIG_MACH_EDB9302=y
CONFIG_MACH_EDB9315=y
CONFIG_MACH_EDB9315A=y
CONFIG_MACH_GESBC9312=y
CONFIG_MACH_TS72XX=y
@ -166,6 +178,7 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
@ -233,6 +246,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -240,6 +255,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@ -294,6 +310,7 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@ -386,6 +403,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
#
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_TS7250=y
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
@ -582,6 +601,7 @@ CONFIG_EP93XX_WATCHDOG=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@ -613,6 +633,7 @@ CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_PCA_ISA is not set
@ -641,13 +662,13 @@ CONFIG_I2C_DEBUG_CHIP=y
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@ -675,8 +696,10 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
@ -704,6 +727,7 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@ -714,6 +738,7 @@ CONFIG_HWMON=y
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
@ -725,7 +750,7 @@ CONFIG_HWMON=y
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
@ -742,6 +767,9 @@ CONFIG_USB_DYNAMIC_MINORS=y
# USB Host Controller Drivers
#
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
#
@ -806,6 +834,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
@ -830,9 +859,11 @@ CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
#
@ -845,10 +876,12 @@ CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
@ -880,17 +913,25 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
CONFIG_RTC_DRV_M48T86=y
CONFIG_RTC_DRV_EP93XX=y
# CONFIG_RTC_DRV_PL031 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# File systems
@ -910,6 +951,7 @@ CONFIG_JBD=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
@ -957,6 +999,7 @@ CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -1066,15 +1109,20 @@ CONFIG_NLS_ISO8859_1=y
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
@ -1114,3 +1162,4 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y

55
arch/arm/configs/ixp2000_defconfig
View File

@ -1,14 +1,18 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-rc2
# Wed Apr 19 21:12:49 2006
# Linux kernel version: 2.6.18-rc1
# Sun Jul 9 15:28:50 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@ -43,14 +47,15 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@ -83,18 +88,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@ -102,12 +115,6 @@ CONFIG_ARCH_IXP2000=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
@ -171,6 +178,7 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
@ -218,6 +226,8 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@ -236,6 +246,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -243,6 +255,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@ -297,6 +310,7 @@ CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@ -525,6 +539,7 @@ CONFIG_ENP2611_MSF_NET=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
@ -542,7 +557,6 @@ CONFIG_ENP2611_MSF_NET=y
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
@ -654,6 +668,7 @@ CONFIG_IXP2000_WATCHDOG=y
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@ -697,6 +712,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_IXP2000=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
@ -733,13 +749,13 @@ CONFIG_SENSORS_EEPROM=y
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@ -768,10 +784,12 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
@ -799,6 +817,7 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@ -808,6 +827,7 @@ CONFIG_HWMON=y
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
@ -866,6 +886,7 @@ CONFIG_FS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
@ -910,6 +931,7 @@ CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -939,6 +961,7 @@ CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@ -980,14 +1003,19 @@ CONFIG_MSDOS_PARTITION=y
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
@ -1027,3 +1055,4 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y

59
arch/arm/configs/ixp23xx_defconfig
View File

@ -1,14 +1,18 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-rc2
# Wed Apr 19 21:13:50 2006
# Linux kernel version: 2.6.18-rc1
# Sun Jul 9 14:13:35 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@ -43,14 +47,15 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_OBSOLETE_INTERMODULE=y
#
# Loadable module support
@ -83,18 +88,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
CONFIG_ARCH_IXP23XX=y
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
@ -102,12 +115,6 @@ CONFIG_ARCH_IXP23XX=y
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_AT91RM9200 is not set
CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
#
@ -165,6 +172,7 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_RESOURCES_64BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@ -212,6 +220,8 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
@ -230,6 +240,8 @@ CONFIG_SYN_COOKIES=y
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@ -237,6 +249,7 @@ CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
@ -291,6 +304,7 @@ CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@ -520,6 +534,7 @@ CONFIG_BLK_DEV_SD=y
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@ -641,6 +656,7 @@ CONFIG_E1000_NAPI=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
#
# Token Ring devices
@ -658,7 +674,6 @@ CONFIG_E1000_NAPI=y
CONFIG_WAN=y
# CONFIG_DSCC4 is not set
# CONFIG_LANMEDIA is not set
# CONFIG_SYNCLINK_SYNCPPP is not set
CONFIG_HDLC=y
CONFIG_HDLC_RAW=y
# CONFIG_HDLC_RAW_ETH is not set
@ -775,6 +790,7 @@ CONFIG_WATCHDOG=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@ -817,6 +833,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
@ -853,13 +870,13 @@ CONFIG_SENSORS_EEPROM=y
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
@ -888,10 +905,12 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
@ -919,6 +938,7 @@ CONFIG_HWMON=y
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
@ -929,6 +949,7 @@ CONFIG_HWMON=y
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
@ -959,6 +980,7 @@ CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
@ -1050,10 +1072,12 @@ CONFIG_USB_MON=y
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
@ -1100,6 +1124,7 @@ CONFIG_FS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
@ -1146,6 +1171,7 @@ CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -1175,6 +1201,7 @@ CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@ -1255,14 +1282,19 @@ CONFIG_NLS_CODEPAGE_437=y
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
@ -1302,3 +1334,4 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y

34
arch/arm/configs/lpd270_defconfig
View File

@ -1,15 +1,19 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-git2
# Wed Jun 21 22:20:18 2006
# Linux kernel version: 2.6.18-rc1
# Sun Jul 9 14:15:23 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_MTD_XIP=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@ -43,10 +47,12 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@ -85,7 +91,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91RM9200 is not set
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
@ -117,6 +123,7 @@ CONFIG_MACH_LOGICPD_PXA270=y
# CONFIG_MACH_MAINSTONE is not set
# CONFIG_ARCH_PXA_IDP is not set
# CONFIG_PXA_SHARPSL is not set
# CONFIG_MACH_TRIZEPS4 is not set
CONFIG_PXA27x=y
CONFIG_IWMMXT=y
@ -161,6 +168,7 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ALIGNMENT_TRAP=y
#
@ -194,8 +202,6 @@ CONFIG_BINFMT_ELF=y
# Power management options
#
# CONFIG_PM is not set
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_APM is not set
#
@ -293,6 +299,7 @@ CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
@ -561,6 +568,7 @@ CONFIG_SERIO_LIBPS2=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@ -588,6 +596,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@ -617,13 +626,13 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
@ -658,12 +667,13 @@ CONFIG_VIDEO_V4L2=y
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_FIRMWARE_EDID=y
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
@ -822,6 +832,7 @@ CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
@ -849,6 +860,7 @@ CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@ -914,14 +926,19 @@ CONFIG_NLS_ISO8859_1=y
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
@ -961,3 +978,4 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_PLIST=y

36
arch/arm/configs/onearm_defconfig
View File

@ -1,14 +1,18 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17-git10
# Mon Jun 26 13:45:44 2006
# Linux kernel version: 2.6.18-rc1
# Sun Jul 9 14:16:20 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
@ -42,10 +46,12 @@ CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_RT_MUTEXES=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
@ -86,7 +92,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
@ -111,9 +116,16 @@ CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_OMAP is not set
#
# AT91RM9200 Implementations
# Atmel AT91 System-on-Chip
#
#
# Atmel AT91 Processors
#
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_AT91SAM9260 is not set
# CONFIG_ARCH_AT91SAM9261 is not set
#
# AT91RM9200 Board Type
#
@ -123,12 +135,12 @@ CONFIG_MACH_ONEARM=y
# CONFIG_MACH_CSB337 is not set
# CONFIG_MACH_CSB637 is not set
# CONFIG_MACH_CARMEVA is not set
# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_ATEB9200 is not set
# CONFIG_MACH_KB9200 is not set
# CONFIG_MACH_KAFA is not set
#
# AT91RM9200 Feature Selections
# AT91 Feature Selections
#
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
@ -186,6 +198,7 @@ CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4096
# CONFIG_RESOURCES_64BIT is not set
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
# CONFIG_LEDS_CPU is not set
@ -600,6 +613,7 @@ CONFIG_AT91_WATCHDOG=y
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
@ -743,6 +757,7 @@ CONFIG_VIDEO_V4L2=y
#
# Graphics support
#
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB is not set
#
@ -980,6 +995,7 @@ CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
@ -1006,14 +1022,19 @@ CONFIG_MSDOS_PARTITION=y
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
@ -1052,3 +1073,4 @@ CONFIG_DEBUG_LL=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y

725
arch/arm/configs/pnx4008_defconfig
View File

File diff suppressed because it is too large Load Diff

3
arch/arm/kernel/Makefile
View File

@ -13,12 +13,11 @@ obj-y := compat.o entry-armv.o entry-common.o irq.o \
obj-$(CONFIG_APM) += apm.o
obj-$(CONFIG_ISA_DMA_API) += dma.o
obj-$(CONFIG_ARCH_ACORN) += ecard.o
obj-$(CONFIG_FOOTBRIDGE) += isa.o
obj-$(CONFIG_FIQ) += fiq.o
obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o

11
arch/arm/kernel/bios32.c
View File

@ -370,17 +370,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
switch (dev->class >> 8) {
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
case PCI_CLASS_BRIDGE_ISA:
case PCI_CLASS_BRIDGE_EISA:
/*
* If this device is an ISA bridge, set isa_bridge
* to point at this device. We will then go looking
* for things like keyboard, etc.
*/
isa_bridge = dev;
break;
#endif
case PCI_CLASS_BRIDGE_PCI:
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
status |= PCI_BRIDGE_CTL_PARITY|PCI_BRIDGE_CTL_MASTER_ABORT;

3
arch/arm/kernel/ecard.c
View File

@ -470,7 +470,8 @@ static void ecard_irq_mask(unsigned int irqnr)
}
}
static struct irqchip ecard_chip = {
static struct irq_chip ecard_chip = {
.name = "ECARD",
.ack = ecard_irq_mask,
.mask = ecard_irq_mask,
.unmask = ecard_irq_unmask,

21
arch/arm/kernel/entry-armv.S
View File

@ -634,6 +634,14 @@ ENTRY(__switch_to)
* purpose.
*/
.macro usr_ret, reg
#ifdef CONFIG_ARM_THUMB
bx \reg
#else
mov pc, \reg
#endif
.endm
.align 5
.globl __kuser_helper_start
__kuser_helper_start:
@ -675,7 +683,7 @@ __kuser_memory_barrier: @ 0xffff0fa0
#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
mov pc, lr
usr_ret lr
.align 5
@ -778,7 +786,7 @@ __kuser_cmpxchg: @ 0xffff0fc0
mov r0, #-1
adds r0, r0, #0
#endif
mov pc, lr
usr_ret lr
#else
@ -792,7 +800,7 @@ __kuser_cmpxchg: @ 0xffff0fc0
#ifdef CONFIG_SMP
mcr p15, 0, r0, c7, c10, 5 @ dmb
#endif
mov pc, lr
usr_ret lr
#endif
@ -834,16 +842,11 @@ __kuser_cmpxchg: @ 0xffff0fc0
__kuser_get_tls: @ 0xffff0fe0
#if !defined(CONFIG_HAS_TLS_REG) && !defined(CONFIG_TLS_REG_EMUL)
ldr r0, [pc, #(16 - 8)] @ TLS stored at 0xffff0ff0
mov pc, lr
#else
mrc p15, 0, r0, c13, c0, 3 @ read TLS register
mov pc, lr
#endif
usr_ret lr
.rep 5
.word 0 @ pad up to __kuser_helper_version

8
arch/arm/kernel/head.S
View File

@ -114,18 +114,18 @@ ENTRY(secondary_startup)
* Use the page tables supplied from __cpu_up.
*/
adr r4, __secondary_data
ldmia r4, {r5, r6, r13} @ address to jump to after
ldmia r4, {r5, r7, r13} @ address to jump to after
sub r4, r4, r5 @ mmu has been enabled
ldr r4, [r6, r4] @ get secondary_data.pgdir
ldr r4, [r7, r4] @ get secondary_data.pgdir
adr lr, __enable_mmu @ return address
add pc, r10, #12 @ initialise processor
add pc, r10, #PROCINFO_INITFUNC @ initialise processor
@ (return control reg)
/*
* r6 = &secondary_data
*/
ENTRY(__secondary_switched)
ldr sp, [r6, #4] @ get secondary_data.stack
ldr sp, [r7, #4] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel

11
arch/arm/kernel/irq.c
View File

@ -77,6 +77,7 @@ int show_interrupts(struct seq_file *p, void *v)
seq_printf(p, "%3d: ", i);
for_each_present_cpu(cpu)
seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
seq_printf(p, " %10s", irq_desc[i].chip->name ? : "-");
seq_printf(p, " %s", action->name);
for (action = action->next; action; action = action->next)
seq_printf(p, ", %s", action->name);
@ -167,6 +168,16 @@ void __init init_IRQ(void)
}
#ifdef CONFIG_HOTPLUG_CPU
static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
{
pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
spin_lock_irq(&desc->lock);
desc->chip->set_affinity(irq, cpumask_of_cpu(cpu));
spin_unlock_irq(&desc->lock);
}
/*
* The CPU has been marked offline. Migrate IRQs off this CPU. If
* the affinity settings do not allow other CPUs, force them onto any

63
arch/arm/kernel/isa.c
View File

@ -3,21 +3,14 @@
*
* Copyright (C) 1999 Phil Blundell
*
* ISA shared memory and I/O port support
*/
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* ISA shared memory and I/O port support, and is required to support
* iopl, inb, outb and friends in userspace via glibc emulation.
*/
/*
* Nothing about this is actually ARM specific. One day we could move
* it into kernel/resource.c or some place like that.
*/
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/fs.h>
@ -27,21 +20,49 @@
static unsigned int isa_membase, isa_portbase, isa_portshift;
static ctl_table ctl_isa_vars[4] = {
{BUS_ISA_MEM_BASE, "membase", &isa_membase,
sizeof(isa_membase), 0444, NULL, &proc_dointvec},
{BUS_ISA_PORT_BASE, "portbase", &isa_portbase,
sizeof(isa_portbase), 0444, NULL, &proc_dointvec},
{BUS_ISA_PORT_SHIFT, "portshift", &isa_portshift,
sizeof(isa_portshift), 0444, NULL, &proc_dointvec},
{0}
{
.ctl_name = BUS_ISA_MEM_BASE,
.procname = "membase",
.data = &isa_membase,
.maxlen = sizeof(isa_membase),
.mode = 0444,
.proc_handler = &proc_dointvec,
}, {
.ctl_name = BUS_ISA_PORT_BASE,
.procname = "portbase",
.data = &isa_portbase,
.maxlen = sizeof(isa_portbase),
.mode = 0444,
.proc_handler = &proc_dointvec,
}, {
.ctl_name = BUS_ISA_PORT_SHIFT,
.procname = "portshift",
.data = &isa_portshift,
.maxlen = sizeof(isa_portshift),
.mode = 0444,
.proc_handler = &proc_dointvec,
}, {0}
};
static struct ctl_table_header *isa_sysctl_header;
static ctl_table ctl_isa[2] = {{CTL_BUS_ISA, "isa", NULL, 0, 0555, ctl_isa_vars},
{0}};
static ctl_table ctl_bus[2] = {{CTL_BUS, "bus", NULL, 0, 0555, ctl_isa},
{0}};
static ctl_table ctl_isa[2] = {
{
.ctl_name = CTL_BUS_ISA,
.procname = "isa",
.mode = 0555,
.child = ctl_isa_vars,
}, {0}
};
static ctl_table ctl_bus[2] = {
{
.ctl_name = CTL_BUS,
.procname = "bus",
.mode = 0555,
.child = ctl_isa,
}, {0}
};
void __init
register_isa_ports(unsigned int membase, unsigned int portbase, unsigned int portshift)

2
arch/arm/kernel/setup.c
View File

@ -17,7 +17,7 @@
#include <linux/console.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/tty.h>
#include <linux/screen_info.h>
#include <linux/init.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>

5
arch/arm/kernel/traps.c
View File

@ -232,11 +232,8 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
bust_spinlocks(0);
spin_unlock_irq(&die_lock);
if (panic_on_oops) {
printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
ssleep(5);
if (panic_on_oops)
panic("Fatal exception");
}
do_exit(SIGSEGV);
}

45
arch/arm/mach-at91rm9200/at91rm9200.c
View File

@ -107,3 +107,48 @@ void __init at91rm9200_map_io(void)
iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc));
}
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller (FIQ) */
7, /* System Peripherals */
0, /* Parallel IO Controller A */
0, /* Parallel IO Controller B */
0, /* Parallel IO Controller C */
0, /* Parallel IO Controller D */
6, /* USART 0 */
6, /* USART 1 */
6, /* USART 2 */
6, /* USART 3 */
0, /* Multimedia Card Interface */
4, /* USB Device Port */
0, /* Two-Wire Interface */
6, /* Serial Peripheral Interface */
5, /* Serial Synchronous Controller 0 */
5, /* Serial Synchronous Controller 1 */
5, /* Serial Synchronous Controller 2 */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
3, /* USB Host port */
3, /* Ethernet MAC */
0, /* Advanced Interrupt Controller (IRQ0) */
0, /* Advanced Interrupt Controller (IRQ1) */
0, /* Advanced Interrupt Controller (IRQ2) */
0, /* Advanced Interrupt Controller (IRQ3) */
0, /* Advanced Interrupt Controller (IRQ4) */
0, /* Advanced Interrupt Controller (IRQ5) */
0 /* Advanced Interrupt Controller (IRQ6) */
};
void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS])
{
if (!priority)
priority = at91rm9200_default_irq_priority;
at91_aic_init(priority);
}

8
arch/arm/mach-at91rm9200/generic.h
View File

@ -8,13 +8,19 @@
* published by the Free Software Foundation.
*/
void at91_gpio_irq_setup(unsigned banks);
/* Interrupts */
extern void __init at91rm9200_init_irq(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
extern void __init at91_gpio_irq_setup(unsigned banks);
/* Timer */
struct sys_timer;
extern struct sys_timer at91rm9200_timer;
/* Memory Map */
extern void __init at91rm9200_map_io(void);
/* Clocks */
extern int __init at91_clock_init(unsigned long main_clock);
struct device;
extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func);

3
arch/arm/mach-at91rm9200/gpio.c
View File

@ -327,7 +327,8 @@ static int gpio_irq_type(unsigned pin, unsigned type)
return (type == IRQT_BOTHEDGE) ? 0 : -EINVAL;
}
static struct irqchip gpio_irqchip = {
static struct irq_chip gpio_irqchip = {
.name = "GPIO",
.mask = gpio_irq_mask,
.unmask = gpio_irq_unmask,
.set_type = gpio_irq_type,

71
arch/arm/mach-at91rm9200/irq.c
View File

@ -36,58 +36,20 @@
#include "generic.h"
/*
* The default interrupt priority levels (0 = lowest, 7 = highest).
*/
static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
7, /* Advanced Interrupt Controller */
7, /* System Peripheral */
0, /* Parallel IO Controller A */
0, /* Parallel IO Controller B */
0, /* Parallel IO Controller C */
0, /* Parallel IO Controller D */
6, /* USART 0 */
6, /* USART 1 */
6, /* USART 2 */
6, /* USART 3 */
0, /* Multimedia Card Interface */
4, /* USB Device Port */
0, /* Two-Wire Interface */
6, /* Serial Peripheral Interface */
5, /* Serial Synchronous Controller */
5, /* Serial Synchronous Controller */
5, /* Serial Synchronous Controller */
0, /* Timer Counter 0 */
0, /* Timer Counter 1 */
0, /* Timer Counter 2 */
0, /* Timer Counter 3 */
0, /* Timer Counter 4 */
0, /* Timer Counter 5 */
3, /* USB Host port */
3, /* Ethernet MAC */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0, /* Advanced Interrupt Controller */
0 /* Advanced Interrupt Controller */
};
static void at91rm9200_mask_irq(unsigned int irq)
static void at91_aic_mask_irq(unsigned int irq)
{
/* Disable interrupt on AIC */
at91_sys_write(AT91_AIC_IDCR, 1 << irq);
}
static void at91rm9200_unmask_irq(unsigned int irq)
static void at91_aic_unmask_irq(unsigned int irq)
{
/* Enable interrupt on AIC */
at91_sys_write(AT91_AIC_IECR, 1 << irq);
}
static int at91rm9200_irq_type(unsigned irq, unsigned type)
static int at91_aic_set_type(unsigned irq, unsigned type)
{
unsigned int smr, srctype;
@ -122,7 +84,7 @@ static int at91rm9200_irq_type(unsigned irq, unsigned type)
static u32 wakeups;
static u32 backups;
static int at91rm9200_irq_set_wake(unsigned irq, unsigned value)
static int at91_aic_set_wake(unsigned irq, unsigned value)
{
if (unlikely(irq >= 32))
return -EINVAL;
@ -149,28 +111,25 @@ void at91_irq_resume(void)
}
#else
#define at91rm9200_irq_set_wake NULL
#define at91_aic_set_wake NULL
#endif
static struct irqchip at91rm9200_irq_chip = {
.ack = at91rm9200_mask_irq,
.mask = at91rm9200_mask_irq,
.unmask = at91rm9200_unmask_irq,
.set_type = at91rm9200_irq_type,
.set_wake = at91rm9200_irq_set_wake,
static struct irq_chip at91_aic_chip = {
.name = "AIC",
.ack = at91_aic_mask_irq,
.mask = at91_aic_mask_irq,
.unmask = at91_aic_unmask_irq,
.set_type = at91_aic_set_type,
.set_wake = at91_aic_set_wake,
};
/*
* Initialize the AIC interrupt controller.
*/
void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS])
void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
{
unsigned int i;
/* No priority list specified for this board -> use defaults */
if (priority == NULL)
priority = at91rm9200_default_irq_priority;
/*
* The IVR is used by macro get_irqnr_and_base to read and verify.
* The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
@ -178,10 +137,10 @@ void __init at91rm9200_init_irq(unsigned int priority[NR_AIC_IRQS])
for (i = 0; i < NR_AIC_IRQS; i++) {
/* Put irq number in Source Vector Register: */
at91_sys_write(AT91_AIC_SVR(i), i);
/* Store the Source Mode Register as defined in table above */
/* Active Low interrupt, with the specified priority */
at91_sys_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
set_irq_chip(i, &at91rm9200_irq_chip);
set_irq_chip(i, &at91_aic_chip);
set_irq_handler(i, do_level_IRQ);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);

2
arch/arm/mach-footbridge/cats-hw.c
View File

@ -8,7 +8,7 @@
#include <linux/ioport.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/screen_info.h>
#include <asm/hardware/dec21285.h>
#include <asm/io.h>

1
arch/arm/mach-footbridge/dc21285.c
View File

@ -35,7 +35,6 @@
extern int setup_arm_irq(int, struct irqaction *);
extern void pcibios_report_status(u_int status_mask, int warn);
extern void register_isa_ports(unsigned int, unsigned int, unsigned int);
static unsigned long
dc21285_base_address(struct pci_bus *bus, unsigned int devfn)

6
arch/arm/mach-imx/irq.c
View File

@ -204,13 +204,15 @@ imx_gpiod_demux_handler(unsigned int irq_unused, struct irqdesc *desc,
imx_gpio_handler(mask, irq, desc, regs);
}
static struct irqchip imx_internal_chip = {
static struct irq_chip imx_internal_chip = {
.name = "MPU",
.ack = imx_mask_irq,
.mask = imx_mask_irq,
.unmask = imx_unmask_irq,
};
static struct irqchip imx_gpio_chip = {
static struct irq_chip imx_gpio_chip = {
.name = "GPIO",
.ack = imx_gpio_ack_irq,
.mask = imx_gpio_mask_irq,
.unmask = imx_gpio_unmask_irq,

3
arch/arm/mach-integrator/integrator_ap.c
View File

@ -161,7 +161,8 @@ static void sc_unmask_irq(unsigned int irq)
writel(1 << irq, VA_IC_BASE + IRQ_ENABLE_SET);
}
static struct irqchip sc_chip = {
static struct irq_chip sc_chip = {
.name = "SC",
.ack = sc_mask_irq,
.mask = sc_mask_irq,
.unmask = sc_unmask_irq,

9
arch/arm/mach-integrator/integrator_cp.c
View File

@ -156,7 +156,8 @@ static void cic_unmask_irq(unsigned int irq)
cic_writel(1 << irq, INTCP_VA_CIC_BASE + IRQ_ENABLE_SET);
}
static struct irqchip cic_chip = {
static struct irq_chip cic_chip = {
.name = "CIC",
.ack = cic_mask_irq,
.mask = cic_mask_irq,
.unmask = cic_unmask_irq,
@ -174,7 +175,8 @@ static void pic_unmask_irq(unsigned int irq)
pic_writel(1 << irq, INTCP_VA_PIC_BASE + IRQ_ENABLE_SET);
}
static struct irqchip pic_chip = {
static struct irq_chip pic_chip = {
.name = "PIC",
.ack = pic_mask_irq,
.mask = pic_mask_irq,
.unmask = pic_unmask_irq,
@ -192,7 +194,8 @@ static void sic_unmask_irq(unsigned int irq)
sic_writel(1 << irq, INTCP_VA_SIC_BASE + IRQ_ENABLE_SET);
}
static struct irqchip sic_chip = {
static struct irq_chip sic_chip = {
.name = "SIC",
.ack = sic_mask_irq,
.mask = sic_mask_irq,
.unmask = sic_unmask_irq,

2
arch/arm/mach-integrator/pci_v3.c
View File

@ -600,4 +600,6 @@ void __init pci_v3_postinit(void)
printk(KERN_ERR "PCI: unable to grab local bus timeout "
"interrupt: %d\n", ret);
#endif
register_isa_ports(PHYS_PCI_MEM_BASE, PHYS_PCI_IO_BASE, 0);
}

3
arch/arm/mach-iop3xx/iop321-irq.c
View File

@ -52,7 +52,8 @@ iop321_irq_unmask (unsigned int irq)
intctl_write(iop321_mask);
}
struct irqchip ext_chip = {
struct irq_chip ext_chip = {
.name = "IOP",
.ack = iop321_irq_mask,
.mask = iop321_irq_mask,
.unmask = iop321_irq_unmask,

6
arch/arm/mach-iop3xx/iop331-irq.c
View File

@ -77,13 +77,15 @@ iop331_irq_unmask2(unsigned int irq)
intctl_write1(iop331_mask1);
}
struct irqchip iop331_irqchip1 = {
struct irq_chip iop331_irqchip1 = {
.name = "IOP-1",
.ack = iop331_irq_mask1,
.mask = iop331_irq_mask1,
.unmask = iop331_irq_unmask1,
};
struct irqchip iop331_irqchip2 = {
struct irq_chip iop331_irqchip2 = {
.name = "IOP-2",
.ack = iop331_irq_mask2,
.mask = iop331_irq_mask2,
.unmask = iop331_irq_unmask2,

2
arch/arm/mach-ixp4xx/common-pci.c
View File

@ -532,8 +532,6 @@ pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
return -EIO;
}
EXPORT_SYMBOL(pci_set_dma_mask);
EXPORT_SYMBOL(pci_set_consistent_dma_mask);
EXPORT_SYMBOL(ixp4xx_pci_read);
EXPORT_SYMBOL(ixp4xx_pci_write);

7
arch/arm/mach-ixp4xx/gtwx5715-setup.c
View File

@ -107,9 +107,9 @@ static struct flash_platform_data gtwx5715_flash_data = {
.width = 2,
};
static struct gtw5715_flash_resource = {
static struct resource gtwx5715_flash_resource = {
.flags = IORESOURCE_MEM,
}
};
static struct platform_device gtwx5715_flash = {
.name = "IXP4XX-Flash",
@ -130,9 +130,6 @@ static void __init gtwx5715_init(void)
{
ixp4xx_sys_init();
if (!flash_resource)
printk(KERN_ERR "Could not allocate flash resource\n");
gtwx5715_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
gtwx5715_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;

1
arch/arm/mach-ixp4xx/nslu2-pci.c
View File

@ -17,6 +17,7 @@
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>

1
arch/arm/mach-ixp4xx/nslu2-power.c
View File

@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/reboot.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/reboot.h>

3
arch/arm/mach-lh7a40x/arch-kev7a400.c
View File

@ -63,7 +63,8 @@ static void kev7a400_unmask_cpld_irq (u32 irq)
CPLD_WR_PB_INT_MASK = CPLD_IRQ_mask;
}
static struct irqchip kev7a400_cpld_chip = {
static struct irq_chip kev7a400_cpld_chip = {
.name = "CPLD",
.ack = kev7a400_ack_cpld_irq,
.mask = kev7a400_mask_cpld_irq,
.unmask = kev7a400_unmask_cpld_irq,

3
arch/arm/mach-lh7a40x/arch-lpd7a40x.c
View File

@ -200,7 +200,8 @@ static void lh7a40x_unmask_cpld_irq (u32 irq)
}
}
static struct irqchip lpd7a40x_cpld_chip = {
static struct irq_chip lpd7a40x_cpld_chip = {
.name = "CPLD",
.ack = lh7a40x_ack_cpld_irq,
.mask = lh7a40x_mask_cpld_irq,
.unmask = lh7a40x_unmask_cpld_irq,

Some files were not shown because too many files have changed in this diff Show More