ARM: dts: amlogic updates for v5.12

- add thermal zones with cooling configuration
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAmAa9fgACgkQWTcYmtP7
 xmU+Mg/9HEEEaD8Z5f0Fwv4U5DMC0RjmXgtsiZqGfNd2laG0FAPzq4eaTdwDybtQ
 VZBmmjx9FfO8oCW/gm3UGqBVOOxuZ1F/OFGd5DeHnKaevgJC2E3+x2jrunwzoeiI
 nUMyRd660WGqTvZDq74YLUJcenFBUN/5jTeefGW/ZDx/xgTFWA+k2d62yXi6C8jG
 p1CuggxbDMe+wmgcicDqVGnAm9j7uNYlS7zlWiVDcuMjJLxhMBnpHpYy+XAS/Bu4
 X9dRCY683OtpmZNkG25wjKk0VPdu+RrBW5HlARBO7FWOWx03CzX3jMCnQkCwF1cV
 pfBfTvCc/nG3JAvxpsziwo6jb1ZKcAud3i8AYb9qQrhT26VtqHV+kJPUiUPSvX+t
 p5XYD9ZDaMa1zT+cKzs+YBSRn/hnuTgZw419IXoVd+iELw9dYODIekj/lJSm5rNS
 DnAl+cukueFriDArZkxBfWVA3fRBu8vJDfdgZTILUZQplvSsyMn0y470wh9+znrD
 srIZ3bnbGEcA/RgVX27WlxmTycLvnwwIZ7slwheEbNKlj70w/ZON+5Vv1aNkIJzq
 q1437QzZ6wRKE9voX8LITs9oiZqh2CRQ34QN+WxQvhPhPdsl+kVRLTXNXOZ3SSvC
 JWHNJRJ8l+VP7vkb+JRbRnJ3ETw6ZeG1AylDtplcMLrlrqBL40k=
 =Q9GJ
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: amlogic updates for v5.12
- add thermal zones with cooling configuration

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: add the thermal-zones with cooling configuration
  ARM: dts: meson8: add the thermal-zones with cooling configuration
  ARM: dts: meson: add the ADC thermal sensor to meson.dtsi
  ARM: dts: meson: move iio-hwmon for the SoC temperature to meson.dtsi

Link: https://lore.kernel.org/r/7ho8h12bto.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/boot/dts/meson.dtsi

@@ -11,6 +11,11 @@
 	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&saradc 8>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -293,6 +298,13 @@
 		};
 	};
 
+	thermal_sensor: thermal-sensor {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&saradc 8>;
+		io-channel-names = "sensor-channel";
+	};
+
 	xtal: xtal-clk {
 		compatible = "fixed-clock";
 		clock-frequency = <24000000>;

arch/arm/boot/dts/meson8.dtsi

@@ -9,6 +9,7 @@
 #include <dt-bindings/power/meson8-power.h>
 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "meson.dtsi"
 
 / {
@@ -28,6 +29,7 @@
 			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu1: cpu@201 {
@@ -39,6 +41,7 @@
 			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu2: cpu@202 {
@@ -50,6 +53,7 @@
 			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu3: cpu@203 {
@@ -61,6 +65,7 @@
 			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
@@ -190,6 +195,54 @@
 		};
 	};
 
+	thermal-zones {
+		soc {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	mmcbus: bus@c8000000 {
 		compatible = "simple-bus";
 		reg = <0xc8000000 0x8000>;
@@ -254,6 +307,7 @@
 			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 			clock-names = "bus", "core";
 			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 }; /* end of / */

arch/arm/boot/dts/meson8b-ec100.dts

@@ -70,11 +70,6 @@
 		timeout-ms = <20000>;
 	};
 
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&saradc 8>;
-	};
-
 	leds {
 		compatible = "gpio-leds";
 

arch/arm/boot/dts/meson8b-mxq.dts

@@ -27,11 +27,6 @@
 		reg = <0x40000000 0x40000000>;
 	};
 
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&saradc 8>;
-	};
-
 	vcck: regulator-vcck {
 		compatible = "pwm-regulator";
 

arch/arm/boot/dts/meson8b-odroidc1.dts

@@ -85,11 +85,6 @@
 			  1800000 1>;
 	};
 
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&saradc 8>;
-	};
-
 	rtc32k_xtal: rtc32k-xtal-clk {
 		/* X3 in the schematics */
 		compatible = "fixed-clock";

arch/arm/boot/dts/meson8b.dtsi

@@ -10,6 +10,7 @@
 #include <dt-bindings/power/meson8-power.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "meson.dtsi"
 
 / {
@@ -26,6 +27,7 @@
 			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu1: cpu@201 {
@@ -37,6 +39,7 @@
 			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu2: cpu@202 {
@@ -48,6 +51,7 @@
 			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu3: cpu@203 {
@@ -59,6 +63,7 @@
 			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
@@ -167,6 +172,54 @@
 		};
 	};
 
+	thermal-zones {
+		soc {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	mmcbus: bus@c8000000 {
 		compatible = "simple-bus";
 		reg = <0xc8000000 0x8000>;
@@ -221,6 +274,7 @@
 			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 			clock-names = "bus", "core";
 			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 }; /* end of / */

arch/arm/boot/dts/meson8m2-mxiii-plus.dts

@@ -45,11 +45,6 @@
 		};
 	};
 
-	iio-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&saradc 8>;
-	};
-
 	vcc_3v3: regulator-vcc3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC3V3";