leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity

phy: Add SATA3 PHY support for Broadcom NSP SoC

Browse Source 
This patch adds support for Broadcom NSP SATA3 PHY in existing
Broadcom SATA PHY driver.

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit is contained in:
Yendapally Reddy Dhananjaya Reddy 2016-06-16 09:53:34 -04:00 committed by Tejun Heo
parent 3ee2e6dcaa
commit 024812889a
1 changed files with 81 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

81
drivers/phy/phy-brcm-sata.c
View File

@ -45,6 +45,7 @@ enum brcm_sata_phy_version {
BRCM_SATA_PHY_STB_28NM,
BRCM_SATA_PHY_STB_40NM,
BRCM_SATA_PHY_IPROC_NS2,
BRCM_SATA_PHY_IPROC_NSP,
};
struct brcm_sata_port {
@ -73,6 +74,13 @@ enum sata_phy_regs {
PLL_REG_BANK_0 = 0x050,
PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
PLLCONTROL_0_FREQ_DET_RESTART = BIT(13),
PLLCONTROL_0_FREQ_MONITOR = BIT(12),
PLLCONTROL_0_SEQ_START = BIT(15),
PLL_CAP_CONTROL = 0x85,
PLL_ACTRL2 = 0x8b,
PLL_ACTRL2_SELDIV_MASK = 0x1f,
PLL_ACTRL2_SELDIV_SHIFT = 9,
PLL1_REG_BANK = 0x060,
PLL1_ACTRL2 = 0x82,
@ -80,6 +88,7 @@ enum sata_phy_regs {
PLL1_ACTRL4 = 0x84,
OOB_REG_BANK = 0x150,
OOB1_REG_BANK = 0x160,
OOB_CTRL1 = 0x80,
OOB_CTRL1_BURST_MAX_MASK = 0xf,
OOB_CTRL1_BURST_MAX_SHIFT = 12,
@ -271,6 +280,73 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port)
return 0;
}
static int brcm_nsp_sata_init(struct brcm_sata_port *port)
{
struct brcm_sata_phy *priv = port->phy_priv;
struct device *dev = port->phy_priv->dev;
void __iomem *base = priv->phy_base;
unsigned int oob_bank;
unsigned int val, try;
/* Configure OOB control */
if (port->portnum == 0)
oob_bank = OOB_REG_BANK;
else if (port->portnum == 1)
oob_bank = OOB1_REG_BANK;
else
return -EINVAL;
val = 0x0;
val |= (0x0f << OOB_CTRL1_BURST_MAX_SHIFT);
val |= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT);
val |= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
val |= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
brcm_sata_phy_wr(base, oob_bank, OOB_CTRL1, 0x0, val);
val = 0x0;
val |= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
val |= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT);
val |= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
brcm_sata_phy_wr(base, oob_bank, OOB_CTRL2, 0x0, val);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL2,
~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT),
0x0c << PLL_ACTRL2_SELDIV_SHIFT);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_CAP_CONTROL,
0xff0, 0x4f0);
val = PLLCONTROL_0_FREQ_DET_RESTART | PLLCONTROL_0_FREQ_MONITOR;
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
~val, val);
val = PLLCONTROL_0_SEQ_START;
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
~val, 0);
mdelay(10);
brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
~val, val);
/* Wait for pll_seq_done bit */
try = 50;
while (try--) {
val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
BLOCK0_XGXSSTATUS);
if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
break;
msleep(20);
}
if (!try) {
/* PLL did not lock; give up */
dev_err(dev, "port%d PLL did not lock\n", port->portnum);
return -ETIMEDOUT;
}
dev_dbg(dev, "port%d initialized\n", port->portnum);
return 0;
}
static int brcm_sata_phy_init(struct phy *phy)
{
int rc;
@ -284,6 +360,9 @@ static int brcm_sata_phy_init(struct phy *phy)
case BRCM_SATA_PHY_IPROC_NS2:
rc = brcm_ns2_sata_init(port);
break;
case BRCM_SATA_PHY_IPROC_NSP:
rc = brcm_nsp_sata_init(port);
break;
default:
rc = -ENODEV;
};
@ -303,6 +382,8 @@ static const struct of_device_id brcm_sata_phy_of_match[] = {
.data = (void *)BRCM_SATA_PHY_STB_40NM },
{ .compatible = "brcm,iproc-ns2-sata-phy",
.data = (void *)BRCM_SATA_PHY_IPROC_NS2 },
{ .compatible = "brcm,iproc-nsp-sata-phy",
.data = (void *)BRCM_SATA_PHY_IPROC_NSP },
{},
};
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);