diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 9725c546a0d4..eb258526d70d 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -3545,6 +3545,13 @@ shutdown the other cpus. Instead use the REBOOT_VECTOR irq. + nomodeset Disable kernel modesetting. DRM drivers will not perform + display-mode changes or accelerated rendering. Only the + system framebuffer will be available for use if this was + set-up by the firmware or boot loader. + + Useful as fallback, or for testing and debugging. + nomodule Disable module load nopat [X86] Disable PAT (page attribute table extension of diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index ab48ab2f4240..1d3e88daca04 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -43,14 +43,70 @@ properties: vdd33-supply: description: Regulator that provides the supply 3.3V power. + analogix,lane0-swing: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane0 PHY. + Registers 0~9 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0, + Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2, + Swing1_Pre2, Swing0_Pre3, they are for [Boost control] and + [Swing control] setting. + Registers 0~9, bit 3:0 is [Boost control], these bits control + post cursor manual, increase the [Boost control] to increase + Pre-emphasis value. + Registers 0~9, bit 6:4 is [Swing control], these bits control + swing manual, increase [Swing control] setting to add Vp-p value + for each Swing, Pre. + Registers 10~19 are Swing0_Pre0, Swing1_Pre0, Swing2_Pre0, + Swing3_Pre0, Swing0_Pre1, Swing1_Pre1, Swing2_Pre1, Swing0_Pre2, + Swing1_Pre2, Swing0_Pre3, they are for [R select control] and + [R Termination control] setting. + Registers 10~19, bit 4:0 is [R select control], these bits are + compensation manual, increase it can enhance IO driven strength + and Vp-p. + Registers 10~19, bit 5:6 is [R termination control], these bits + adjust 50ohm impedance of DP tx termination. 00:55 ohm, + 01:50 ohm(default), 10:45 ohm, 11:40 ohm. + + analogix,lane1-swing: + $ref: /schemas/types.yaml#/definitions/uint8-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane1 PHY. + DP TX lane1 swing register setting same with lane0 + swing, please refer lane0-swing property description. + + analogix,audio-enable: + type: boolean + description: let the driver enable audio HDMI codec function or not. + ports: $ref: /schemas/graph.yaml#/properties/ports properties: port@0: - $ref: /schemas/graph.yaml#/properties/port + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: - Video port for MIPI DSI input. + MIPI DSI/DPI input. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + bus-type: + enum: [1, 5] + default: 1 + + data-lanes: true port@1: $ref: /schemas/graph.yaml#/properties/port @@ -87,6 +143,9 @@ examples: vdd10-supply = <&pp1000_mipibrdg>; vdd18-supply = <&pp1800_mipibrdg>; vdd33-supply = <&pp3300_mipibrdg>; + analogix,audio-enable; + analogix,lane0-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; + analogix,lane1-swing = /bits/ 8 <0x14 0x54 0x64 0x74>; ports { #address-cells = <1>; @@ -96,6 +155,8 @@ examples: reg = <0>; anx7625_in: endpoint { remote-endpoint = <&mipi_dsi>; + bus-type = <5>; + data-lanes = <0 1 2 3>; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml new file mode 100644 index 000000000000..107dd138e6c6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/nxp,ptn3460.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/nxp,ptn3460.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP PTN3460 eDP to LVDS bridge + +maintainers: + - Sean Paul + +properties: + compatible: + const: nxp,ptn3460 + + reg: + description: I2C address of the bridge + maxItems: 1 + + edid-emulation: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: + The EDID emulation entry to use + Value Resolution Description + 0 1024x768 NXP Generic + 1 1920x1080 NXP Generic + 2 1920x1080 NXP Generic + 3 1600x900 Samsung LTM200KT + 4 1920x1080 Samsung LTM230HT + 5 1366x768 NXP Generic + 6 1600x900 ChiMei M215HGE + enum: [0, 1, 2, 3, 4, 5, 6] + + powerdown-gpios: + description: GPIO connected to the PD_N signal. + maxItems: 1 + + reset-gpios: + description: GPIO connected to the RST_N signal. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for LVDS output + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for eDP input + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - edid-emulation + - powerdown-gpios + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + edid-emulation = <5>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + reg = <1>; + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt b/Documentation/devicetree/bindings/display/bridge/ptn3460.txt deleted file mode 100644 index 361971ba104d..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/ptn3460.txt +++ /dev/null @@ -1,39 +0,0 @@ -ptn3460 bridge bindings - -Required properties: - - compatible: "nxp,ptn3460" - - reg: i2c address of the bridge - - powerdown-gpio: OF device-tree gpio specification for PD_N pin. - - reset-gpio: OF device-tree gpio specification for RST_N pin. - - edid-emulation: The EDID emulation entry to use - +-------+------------+------------------+ - | Value | Resolution | Description | - | 0 | 1024x768 | NXP Generic | - | 1 | 1920x1080 | NXP Generic | - | 2 | 1920x1080 | NXP Generic | - | 3 | 1600x900 | Samsung LTM200KT | - | 4 | 1920x1080 | Samsung LTM230HT | - | 5 | 1366x768 | NXP Generic | - | 6 | 1600x900 | ChiMei M215HGE | - +-------+------------+------------------+ - - - video interfaces: Device node can contain video interface port - nodes for panel according to [1]. - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - -Example: - lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpio = <&gpy2 5 1 0 0>; - reset-gpio = <&gpx1 5 1 0 0>; - edid-emulation = <5>; - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt deleted file mode 100644 index a55bf77bd960..000000000000 --- a/Documentation/devicetree/bindings/display/bridge/sii9234.txt +++ /dev/null @@ -1,49 +0,0 @@ -Silicon Image SiI9234 HDMI/MHL bridge bindings - -Required properties: - - compatible : "sil,sii9234". - - reg : I2C address for TPI interface, use 0x39 - - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) - - iovcc18-supply : I/O Supply Voltage (1.8V) - - avcc12-supply : TMDS Analog Supply Voltage (1.2V) - - cvcc12-supply : Digital Core Supply Voltage (1.2V) - - interrupts: interrupt specifier of INT pin - - reset-gpios: gpio specifier of RESET pin (active low) - - video interfaces: Device node can contain two video interface port - nodes for HDMI encoder and connector according to [1]. - - port@0 - MHL to HDMI - - port@1 - MHL to connector - -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt - - -Example: - sii9234@39 { - compatible = "sil,sii9234"; - reg = <0x39>; - avcc33-supply = <&vcc33mhl>; - iovcc18-supply = <&vcc18mhl>; - avcc12-supply = <&vsil12>; - cvcc12-supply = <&vsil12>; - reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; - interrupt-parent = <&gpf3>; - interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - mhl_to_hdmi: endpoint { - remote-endpoint = <&hdmi_to_mhl>; - }; - }; - port@1 { - reg = <1>; - mhl_to_connector: endpoint { - remote-endpoint = <&connector_to_mhl>; - }; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml new file mode 100644 index 000000000000..f88ddfe4818b --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sil,sii9234.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/sil,sii9234.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Image SiI9234 HDMI/MHL bridge + +maintainers: + - Maciej Purski + +properties: + compatible: + const: sil,sii9234 + + reg: + description: I2C address for TPI interface + maxItems: 1 + + avcc12-supply: + description: TMDS Analog Supply Voltage, 1.2V + + avcc33-supply: + description: MHL/USB Switch Supply Voltage, 3.3V + + cvcc12-supply: + description: Digital Core Supply Voltage, 1.2V + + iovcc18-supply: + description: I/O voltage supply, 1.8V + + interrupts: + maxItems: 1 + + reset-gpios: + description: GPIO connected to the reset pin. + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: + Video port for HDMI (encoder) input + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: + MHL to connector port + + required: + - port@0 + +required: + - compatible + - reg + - avcc12-supply + - avcc33-supply + - cvcc12-supply + - iovcc18-supply + - interrupts + - reset-gpios + - ports + +additionalProperties: false + +examples: + - | + #include + #include + + i2c1 { + #address-cells = <1>; + #size-cells = <0>; + + bridge@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc12-supply = <&vsil12>; + avcc33-supply = <&vcc33mhl>; + cvcc12-supply = <&vsil12>; + iovcc18-supply = <&vcc18mhl>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml new file mode 100644 index 000000000000..a8f3afa922c8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,bf060y8m-aj0.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/boe,bf060y8m-aj0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BOE BF060Y8M-AJ0 5.99" 1080x2160 AMOLED Panel + +maintainers: + - AngeloGioacchino Del Regno + +description: | + This is a 5.99" 1080x2160 16.7M Color active matrix AMOLED + video mode panel module on MIPI-DSI 4-Lane interface, GGRB + pixel arrangement, 63 micrometers pitch, with an active + area of 68.04 x 136.08 millimeters. + Each pixel is divided into red and green dots, or blue and + green dots, and two pixels share red or blue dots which are + arranged in vertical stripe. + The DriverIC for this panel module is SW43404. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: boe,bf060y8m-aj0 + + elvdd-supply: + description: EL Driving positive (VDD) supply (4.40-4.80V) + elvss-supply: + description: EL Driving negative (VSS) supply (-5.00V to -1.40V) + vcc-supply: + description: Core (TSP) voltage supply (2.70-3.60V) + vci-supply: + description: DriverIC Operation supply (2.60-3.60V) + vddio-supply: + description: I/O voltage supply (1.62-1.98V) + + port: true + reg: true + reset-gpios: true + +required: + - compatible + - elvdd-supply + - elvss-supply + - vcc-supply + - vci-supply + - vddio-supply + - reg + - reset-gpios + +additionalProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + panel@0 { + compatible = "boe,bf060y8m-aj0"; + reg = <0>; + + reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + + vcc-supply = <&disp_vcc_vreg>; + vddio-supply = <&disp_vddio_vreg>; + vci-supply = <&disp_vci_vreg>; + elvdd-supply = <&disp_elvdd_vreg>; + elvss-supply = <&disp_elvss_vreg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml new file mode 100644 index 000000000000..7e7a8362b951 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9163.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,ili9163.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek ILI9163 display panels device tree bindings + +maintainers: + - Daniel Mack + +description: + This binding is for display panels using an Ilitek ILI9163 controller in SPI + mode. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - newhaven,1.8-128160EF + - const: ilitek,ili9163 + + spi-max-frequency: + maximum: 32000000 + + dc-gpios: + maxItems: 1 + description: Display data/command selection (D/CX) + + backlight: true + reg: true + reset-gpios: true + rotation: true + +required: + - compatible + - reg + - dc-gpios + - reset-gpios + +additionalProperties: false + +examples: + - | + #include + + backlight: backlight { + compatible = "gpio-backlight"; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + display@0 { + compatible = "newhaven,1.8-128160EF", "ilitek,ili9163"; + reg = <0>; + spi-max-frequency = <32000000>; + dc-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + rotation = <180>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index b2fcec4f22fd..c5d1df680858 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -9,24 +9,28 @@ title: Ilitek ILI9881c based MIPI-DSI panels maintainers: - Maxime Ripard +allOf: + - $ref: panel-common.yaml# + properties: compatible: items: - enum: - bananapi,lhr050h41 - feixin,k101-im2byl02 + - wanchanglong,w552946aba - const: ilitek,ili9881c backlight: true power-supply: true reg: true reset-gpios: true + rotation: true required: - compatible - power-supply - reg - - reset-gpios additionalProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml new file mode 100644 index 000000000000..377a05d48a02 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/novatek,nt35950.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/novatek,nt35950.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Novatek NT35950-based display panels + +maintainers: + - AngeloGioacchino Del Regno + +description: | + The nt35950 IC from Novatek is a Driver IC used to drive MIPI-DSI panels, + with Static RAM for content retention in command mode and also supports + video mode with VESA Frame Buffer Compression or Display Stream Compression + on single, or dual dsi port(s). + This DDIC is also capable of upscaling an input image to the panel's native + resolution, for example it can upscale a 1920x1080 input to 3840x2160 with + either bilinear interpolation or pixel duplication. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - sharp,ls055d1sx04 + - const: novatek,nt35950 + description: This indicates the panel manufacturer of the panel + that is in turn using the NT35950 panel driver. The compatible + string determines how the NT35950 panel driver shall be configured + to work with the indicated panel. The novatek,nt35950 compatible shall + always be provided as a fallback. + + reset-gpios: + maxItems: 1 + description: phandle of gpio for reset line - This should be 8mA, gpio + can be configured using mux, pinctrl, pinctrl-names (active high) + + avdd-supply: + description: positive boost supply regulator + avee-supply: + description: negative boost supply regulator + dvdd-supply: + description: regulator that supplies the digital voltage + vddio-supply: + description: regulator that supplies the I/O voltage + + backlight: true + ports: true + reg: true + +required: + - compatible + - reg + - reset-gpios + - avdd-supply + - avee-supply + - dvdd-supply + - vddio-supply + +additionalProperties: false + +examples: + - | + #include + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,ls055d1sx04", "novatek,nt35950"; + reg = <0>; + + backlight = <&pmi8998_wled>; + reset-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; + + avdd-supply = <&lab>; + avee-supply = <&ibb>; + dvdd-supply = <&disp_dvdd_vreg>; + vddio-supply = <&vreg_l14a_1p85>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel_in1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index fbd71669248f..2c00813f5d20 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -35,6 +35,8 @@ properties: - boe,tv080wum-nl0 # Innolux P079ZCA 7.85" 768x1024 TFT LCD panel - innolux,p079zca + # JDI FHD_R63452 1080x1920 5.2" IPS LCD Panel + - jdi,fhd-r63452 # Khadas TS050 5" 1080x1920 LCD panel - khadas,ts050 # Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml new file mode 100644 index 000000000000..967972939598 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sony,tulip-truly-nt35521.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sony,tulip-truly-nt35521.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sony Tulip Truly NT35521 5.24" 1280x720 MIPI-DSI Panel + +maintainers: + - Shawn Guo + +description: | + The Sony Tulip Truly NT35521 is a 5.24" 1280x720 MIPI-DSI panel, which + can be found no Sony Xperia M4 phone. The panel backlight is managed + through DSI link. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: sony,tulip-truly-nt35521 + + reg: true + + positive5-supply: + description: Positive 5V supply + + negative5-supply: + description: Negative 5V supply + + reset-gpios: true + + enable-gpios: true + + port: true + +required: + - compatible + - reg + - positive5-supply + - negative5-supply + - reset-gpios + - enable-gpios + - port + +additionalProperties: false + +examples: + - | + #include + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sony,tulip-truly-nt35521"; + reg = <0>; + positive5-supply = <&positive5_reg>; + negative5-supply = <&negative5_reg>; + reset-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>; + enable-gpios = <&msmgpio 10 GPIO_ACTIVE_HIGH>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 66d6432fd781..7463870d0922 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1328,6 +1328,8 @@ patternProperties: description: Wondermedia Technologies, Inc. "^wobo,.*": description: Wobo + "^wanchanglong,.*": + description: Wanchanglong Electronics Technology（SHENZHEN）Co.，Ltd. "^x-powers,.*": description: X-Powers "^xes,.*": diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst index ec2f65b31930..5bb55ec1b9b5 100644 --- a/Documentation/gpu/drm-kms-helpers.rst +++ b/Documentation/gpu/drm-kms-helpers.rst @@ -435,3 +435,18 @@ Legacy CRTC/Modeset Helper Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_crtc_helper.c :export: + +Privacy-screen class +==================== + +.. kernel-doc:: drivers/gpu/drm/drm_privacy_screen.c + :doc: overview + +.. kernel-doc:: include/drm/drm_privacy_screen_driver.h + :internal: + +.. kernel-doc:: include/drm/drm_privacy_screen_machine.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_privacy_screen.c + :export: diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 1ef7951ded5e..d14bf1c35d7e 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -506,6 +506,8 @@ Property Types and Blob Property Support .. kernel-doc:: drivers/gpu/drm/drm_property.c :export: +.. _standard_connector_properties: + Standard Connector Properties ----------------------------- diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst index 60d1d7ee0719..f504d363fef5 100644 --- a/Documentation/gpu/todo.rst +++ b/Documentation/gpu/todo.rst @@ -268,17 +268,6 @@ Contact: Daniel Vetter Level: Intermediate -Clean up mmap forwarding ------------------------- - -A lot of drivers forward gem mmap calls to dma-buf mmap for imported buffers. -And also a lot of them forward dma-buf mmap to the gem mmap implementations. -There's drm_gem_prime_mmap() for this now, but still needs to be rolled out. - -Contact: Daniel Vetter - -Level: Intermediate - Generic fbdev defio support --------------------------- @@ -463,6 +452,21 @@ Contact: Thomas Zimmermann , Christian König, Daniel Vette Level: Intermediate +Review all drivers for setting struct drm_mode_config.{max_width,max_height} correctly +-------------------------------------------------------------------------------------- + +The values in struct drm_mode_config.{max_width,max_height} describe the +maximum supported framebuffer size. It's the virtual screen size, but many +drivers treat it like limitations of the physical resolution. + +The maximum width depends on the hardware's maximum scanline pitch. The +maximum height depends on the amount of addressable video memory. Review all +drivers to initialize the fields to the correct values. + +Contact: Thomas Zimmermann + +Level: Intermediate + Core refactorings ================= diff --git a/MAINTAINERS b/MAINTAINERS index 5250298d2817..53b859d10de6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6063,10 +6063,17 @@ F: drivers/gpu/drm/panel/panel-novatek-nt36672a.c DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS M: Ben Skeggs +M: Karol Herbst +M: Lyude Paul L: dri-devel@lists.freedesktop.org L: nouveau@lists.freedesktop.org S: Supported -T: git git://github.com/skeggsb/linux +W: https://nouveau.freedesktop.org/ +Q: https://patchwork.freedesktop.org/project/nouveau/ +Q: https://gitlab.freedesktop.org/drm/nouveau/-/merge_requests +B: https://gitlab.freedesktop.org/drm/nouveau/-/issues +C: irc://irc.oftc.net/nouveau +T: git https://gitlab.freedesktop.org/drm/nouveau.git F: drivers/gpu/drm/nouveau/ F: include/uapi/drm/nouveau_drm.h @@ -6524,6 +6531,14 @@ F: drivers/gpu/drm/drm_panel.c F: drivers/gpu/drm/panel/ F: include/drm/drm_panel.h +DRM PRIVACY-SCREEN CLASS +M: Hans de Goede +L: dri-devel@lists.freedesktop.org +S: Maintained +T: git git://anongit.freedesktop.org/drm/drm-misc +F: drivers/gpu/drm/drm_privacy_screen* +F: include/drm/drm_privacy_screen* + DRM TTM SUBSYSTEM M: Christian Koenig M: Huang Rui @@ -20167,6 +20182,8 @@ F: include/uapi/linux/virtio_gpio.h VIRTIO GPU DRIVER M: David Airlie M: Gerd Hoffmann +R: Gurchetan Singh +R: Chia-I Wu L: dri-devel@lists.freedesktop.org L: virtualization@lists.linux-foundation.org S: Maintained diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index a254512965eb..3667b4d731e7 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -932,8 +932,7 @@ static int bcm2835_clock_is_on(struct clk_hw *hw) static u32 bcm2835_clock_choose_div(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate, - bool round_up) + unsigned long parent_rate) { struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); const struct bcm2835_clock_data *data = clock->data; @@ -945,10 +944,6 @@ static u32 bcm2835_clock_choose_div(struct clk_hw *hw, rem = do_div(temp, rate); div = temp; - - /* Round up and mask off the unused bits */ - if (round_up && ((div & unused_frac_mask) != 0 || rem != 0)) - div += unused_frac_mask + 1; div &= ~unused_frac_mask; /* different clamping limits apply for a mash clock */ @@ -1079,7 +1074,7 @@ static int bcm2835_clock_set_rate(struct clk_hw *hw, struct bcm2835_clock *clock = bcm2835_clock_from_hw(hw); struct bcm2835_cprman *cprman = clock->cprman; const struct bcm2835_clock_data *data = clock->data; - u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate, false); + u32 div = bcm2835_clock_choose_div(hw, rate, parent_rate); u32 ctl; spin_lock(&cprman->regs_lock); @@ -1130,7 +1125,7 @@ static unsigned long bcm2835_clock_choose_div_and_prate(struct clk_hw *hw, if (!(BIT(parent_idx) & data->set_rate_parent)) { *prate = clk_hw_get_rate(parent); - *div = bcm2835_clock_choose_div(hw, rate, *prate, true); + *div = bcm2835_clock_choose_div(hw, rate, *prate); *avgrate = bcm2835_clock_rate_from_divisor(clock, *prate, *div); @@ -1216,7 +1211,7 @@ static int bcm2835_clock_determine_rate(struct clk_hw *hw, rate = bcm2835_clock_choose_div_and_prate(hw, i, req->rate, &div, &prate, &avgrate); - if (rate > best_rate && rate <= req->rate) { + if (abs(req->rate - rate) < abs(req->rate - best_rate)) { best_parent = parent; best_prate = prate; best_rate = rate; diff --git a/drivers/dma-buf/Makefile b/drivers/dma-buf/Makefile index 1ef021273a06..511805dbeb75 100644 --- a/drivers/dma-buf/Makefile +++ b/drivers/dma-buf/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_DMABUF_SYSFS_STATS) += dma-buf-sysfs-stats.o dmabuf_selftests-y := \ selftest.o \ st-dma-fence.o \ - st-dma-fence-chain.o + st-dma-fence-chain.o \ + st-dma-resv.o obj-$(CONFIG_DMABUF_SELFTESTS) += dmabuf_selftests.o diff --git a/drivers/dma-buf/dma-buf.c b/drivers/dma-buf/dma-buf.c index 6437b2e978fb..602b12d7470d 100644 --- a/drivers/dma-buf/dma-buf.c +++ b/drivers/dma-buf/dma-buf.c @@ -299,10 +299,8 @@ static __poll_t dma_buf_poll(struct file *file, poll_table *poll) /** * dma_buf_set_name - Set a name to a specific dma_buf to track the usage. - * The name of the dma-buf buffer can only be set when the dma-buf is not - * attached to any devices. It could theoritically support changing the - * name of the dma-buf if the same piece of memory is used for multiple - * purpose between different devices. + * It could support changing the name of the dma-buf if the same + * piece of memory is used for multiple purpose between different devices. * * @dmabuf: [in] dmabuf buffer that will be renamed. * @buf: [in] A piece of userspace memory that contains the name of @@ -315,25 +313,16 @@ static __poll_t dma_buf_poll(struct file *file, poll_table *poll) static long dma_buf_set_name(struct dma_buf *dmabuf, const char __user *buf) { char *name = strndup_user(buf, DMA_BUF_NAME_LEN); - long ret = 0; if (IS_ERR(name)) return PTR_ERR(name); - dma_resv_lock(dmabuf->resv, NULL); - if (!list_empty(&dmabuf->attachments)) { - ret = -EBUSY; - kfree(name); - goto out_unlock; - } spin_lock(&dmabuf->name_lock); kfree(dmabuf->name); dmabuf->name = name; spin_unlock(&dmabuf->name_lock); -out_unlock: - dma_resv_unlock(dmabuf->resv); - return ret; + return 0; } static long dma_buf_ioctl(struct file *file, @@ -1058,8 +1047,8 @@ EXPORT_SYMBOL_NS_GPL(dma_buf_move_notify, DMA_BUF); * * Interfaces:: * - * void \*dma_buf_vmap(struct dma_buf \*dmabuf) - * void dma_buf_vunmap(struct dma_buf \*dmabuf, void \*vaddr) + * void \*dma_buf_vmap(struct dma_buf \*dmabuf, struct dma_buf_map \*map) + * void dma_buf_vunmap(struct dma_buf \*dmabuf, struct dma_buf_map \*map) * * The vmap call can fail if there is no vmap support in the exporter, or if * it runs out of vmalloc space. Note that the dma-buf layer keeps a reference @@ -1338,8 +1327,6 @@ static int dma_buf_debug_show(struct seq_file *s, void *unused) { struct dma_buf *buf_obj; struct dma_buf_attachment *attach_obj; - struct dma_resv_iter cursor; - struct dma_fence *fence; int count = 0, attach_count; size_t size = 0; int ret; @@ -1370,14 +1357,7 @@ static int dma_buf_debug_show(struct seq_file *s, void *unused) buf_obj->name ?: ""); spin_unlock(&buf_obj->name_lock); - dma_resv_for_each_fence(&cursor, buf_obj->resv, true, fence) { - seq_printf(s, "\t%s fence: %s %s %ssignalled\n", - dma_resv_iter_is_exclusive(&cursor) ? - "Exclusive" : "Shared", - fence->ops->get_driver_name(fence), - fence->ops->get_timeline_name(fence), - dma_fence_is_signaled(fence) ? "" : "un"); - } + dma_resv_describe(buf_obj->resv, s); seq_puts(s, "\tAttached Devices:\n"); attach_count = 0; diff --git a/drivers/dma-buf/dma-fence.c b/drivers/dma-buf/dma-fence.c index 1e82ecd443fa..066400ed8841 100644 --- a/drivers/dma-buf/dma-fence.c +++ b/drivers/dma-buf/dma-fence.c @@ -15,6 +15,7 @@ #include #include #include +#include #define CREATE_TRACE_POINTS #include @@ -907,6 +908,22 @@ err_free_cb: } EXPORT_SYMBOL(dma_fence_wait_any_timeout); +/** + * dma_fence_describe - Dump fence describtion into seq_file + * @fence: the 6fence to describe + * @seq: the seq_file to put the textual description into + * + * Dump a textual description of the fence and it's state into the seq_file. + */ +void dma_fence_describe(struct dma_fence *fence, struct seq_file *seq) +{ + seq_printf(seq, "%s %s seq %llu %ssignalled\n", + fence->ops->get_driver_name(fence), + fence->ops->get_timeline_name(fence), fence->seqno, + dma_fence_is_signaled(fence) ? "" : "un"); +} +EXPORT_SYMBOL(dma_fence_describe); + /** * dma_fence_init - Initialize a custom fence. * @fence: the fence to initialize diff --git a/drivers/dma-buf/dma-resv.c b/drivers/dma-buf/dma-resv.c index 9eb2baa387d4..ff3c0558b3b8 100644 --- a/drivers/dma-buf/dma-resv.c +++ b/drivers/dma-buf/dma-resv.c @@ -38,6 +38,7 @@ #include #include #include +#include /** * DOC: Reservation Object Overview @@ -666,6 +667,28 @@ bool dma_resv_test_signaled(struct dma_resv *obj, bool test_all) } EXPORT_SYMBOL_GPL(dma_resv_test_signaled); +/** + * dma_resv_describe - Dump description of the resv object into seq_file + * @obj: the reservation object + * @seq: the seq_file to dump the description into + * + * Dump a textual description of the fences inside an dma_resv object into the + * seq_file. + */ +void dma_resv_describe(struct dma_resv *obj, struct seq_file *seq) +{ + struct dma_resv_iter cursor; + struct dma_fence *fence; + + dma_resv_for_each_fence(&cursor, obj, true, fence) { + seq_printf(seq, "\t%s fence:", + dma_resv_iter_is_exclusive(&cursor) ? + "Exclusive" : "Shared"); + dma_fence_describe(fence, seq); + } +} +EXPORT_SYMBOL_GPL(dma_resv_describe); + #if IS_ENABLED(CONFIG_LOCKDEP) static int __init dma_resv_lockdep(void) { diff --git a/drivers/dma-buf/selftests.h b/drivers/dma-buf/selftests.h index bc8cea67bf1e..97d73aaa31da 100644 --- a/drivers/dma-buf/selftests.h +++ b/drivers/dma-buf/selftests.h @@ -12,3 +12,4 @@ selftest(sanitycheck, __sanitycheck__) /* keep first (igt selfcheck) */ selftest(dma_fence, dma_fence) selftest(dma_fence_chain, dma_fence_chain) +selftest(dma_resv, dma_resv) diff --git a/drivers/dma-buf/st-dma-resv.c b/drivers/dma-buf/st-dma-resv.c new file mode 100644 index 000000000000..bc32b3eedcb6 --- /dev/null +++ b/drivers/dma-buf/st-dma-resv.c @@ -0,0 +1,371 @@ +/* SPDX-License-Identifier: MIT */ + +/* +* Copyright © 2019 Intel Corporation +* Copyright © 2021 Advanced Micro Devices, Inc. +*/ + +#include +#include +#include + +#include "selftest.h" + +static struct spinlock fence_lock; + +static const char *fence_name(struct dma_fence *f) +{ + return "selftest"; +} + +static const struct dma_fence_ops fence_ops = { + .get_driver_name = fence_name, + .get_timeline_name = fence_name, +}; + +static struct dma_fence *alloc_fence(void) +{ + struct dma_fence *f; + + f = kmalloc(sizeof(*f), GFP_KERNEL); + if (!f) + return NULL; + + dma_fence_init(f, &fence_ops, &fence_lock, 0, 0); + return f; +} + +static int sanitycheck(void *arg) +{ + struct dma_resv resv; + struct dma_fence *f; + int r; + + f = alloc_fence(); + if (!f) + return -ENOMEM; + + dma_fence_signal(f); + dma_fence_put(f); + + dma_resv_init(&resv); + r = dma_resv_lock(&resv, NULL); + if (r) + pr_err("Resv locking failed\n"); + else + dma_resv_unlock(&resv); + dma_resv_fini(&resv); + return r; +} + +static int test_signaling(void *arg, bool shared) +{ + struct dma_resv resv; + struct dma_fence *f; + int r; + + f = alloc_fence(); + if (!f) + return -ENOMEM; + + dma_resv_init(&resv); + r = dma_resv_lock(&resv, NULL); + if (r) { + pr_err("Resv locking failed\n"); + goto err_free; + } + + if (shared) { + r = dma_resv_reserve_shared(&resv, 1); + if (r) { + pr_err("Resv shared slot allocation failed\n"); + goto err_unlock; + } + + dma_resv_add_shared_fence(&resv, f); + } else { + dma_resv_add_excl_fence(&resv, f); + } + + if (dma_resv_test_signaled(&resv, shared)) { + pr_err("Resv unexpectedly signaled\n"); + r = -EINVAL; + goto err_unlock; + } + dma_fence_signal(f); + if (!dma_resv_test_signaled(&resv, shared)) { + pr_err("Resv not reporting signaled\n"); + r = -EINVAL; + goto err_unlock; + } +err_unlock: + dma_resv_unlock(&resv); +err_free: + dma_resv_fini(&resv); + dma_fence_put(f); + return r; +} + +static int test_excl_signaling(void *arg) +{ + return test_signaling(arg, false); +} + +static int test_shared_signaling(void *arg) +{ + return test_signaling(arg, true); +} + +static int test_for_each(void *arg, bool shared) +{ + struct dma_resv_iter cursor; + struct dma_fence *f, *fence; + struct dma_resv resv; + int r; + + f = alloc_fence(); + if (!f) + return -ENOMEM; + + dma_resv_init(&resv); + r = dma_resv_lock(&resv, NULL); + if (r) { + pr_err("Resv locking failed\n"); + goto err_free; + } + + if (shared) { + r = dma_resv_reserve_shared(&resv, 1); + if (r) { + pr_err("Resv shared slot allocation failed\n"); + goto err_unlock; + } + + dma_resv_add_shared_fence(&resv, f); + } else { + dma_resv_add_excl_fence(&resv, f); + } + + r = -ENOENT; + dma_resv_for_each_fence(&cursor, &resv, shared, fence) { + if (!r) { + pr_err("More than one fence found\n"); + r = -EINVAL; + goto err_unlock; + } + if (f != fence) { + pr_err("Unexpected fence\n"); + r = -EINVAL; + goto err_unlock; + } + if (dma_resv_iter_is_exclusive(&cursor) != !shared) { + pr_err("Unexpected fence usage\n"); + r = -EINVAL; + goto err_unlock; + } + r = 0; + } + if (r) { + pr_err("No fence found\n"); + goto err_unlock; + } + dma_fence_signal(f); +err_unlock: + dma_resv_unlock(&resv); +err_free: + dma_resv_fini(&resv); + dma_fence_put(f); + return r; +} + +static int test_excl_for_each(void *arg) +{ + return test_for_each(arg, false); +} + +static int test_shared_for_each(void *arg) +{ + return test_for_each(arg, true); +} + +static int test_for_each_unlocked(void *arg, bool shared) +{ + struct dma_resv_iter cursor; + struct dma_fence *f, *fence; + struct dma_resv resv; + int r; + + f = alloc_fence(); + if (!f) + return -ENOMEM; + + dma_resv_init(&resv); + r = dma_resv_lock(&resv, NULL); + if (r) { + pr_err("Resv locking failed\n"); + goto err_free; + } + + if (shared) { + r = dma_resv_reserve_shared(&resv, 1); + if (r) { + pr_err("Resv shared slot allocation failed\n"); + dma_resv_unlock(&resv); + goto err_free; + } + + dma_resv_add_shared_fence(&resv, f); + } else { + dma_resv_add_excl_fence(&resv, f); + } + dma_resv_unlock(&resv); + + r = -ENOENT; + dma_resv_iter_begin(&cursor, &resv, shared); + dma_resv_for_each_fence_unlocked(&cursor, fence) { + if (!r) { + pr_err("More than one fence found\n"); + r = -EINVAL; + goto err_iter_end; + } + if (!dma_resv_iter_is_restarted(&cursor)) { + pr_err("No restart flag\n"); + goto err_iter_end; + } + if (f != fence) { + pr_err("Unexpected fence\n"); + r = -EINVAL; + goto err_iter_end; + } + if (dma_resv_iter_is_exclusive(&cursor) != !shared) { + pr_err("Unexpected fence usage\n"); + r = -EINVAL; + goto err_iter_end; + } + + /* We use r as state here */ + if (r == -ENOENT) { + r = -EINVAL; + /* That should trigger an restart */ + cursor.seq--; + } else if (r == -EINVAL) { + r = 0; + } + } + if (r) + pr_err("No fence found\n"); +err_iter_end: + dma_resv_iter_end(&cursor); + dma_fence_signal(f); +err_free: + dma_resv_fini(&resv); + dma_fence_put(f); + return r; +} + +static int test_excl_for_each_unlocked(void *arg) +{ + return test_for_each_unlocked(arg, false); +} + +static int test_shared_for_each_unlocked(void *arg) +{ + return test_for_each_unlocked(arg, true); +} + +static int test_get_fences(void *arg, bool shared) +{ + struct dma_fence *f, *excl = NULL, **fences = NULL; + struct dma_resv resv; + int r, i; + + f = alloc_fence(); + if (!f) + return -ENOMEM; + + dma_resv_init(&resv); + r = dma_resv_lock(&resv, NULL); + if (r) { + pr_err("Resv locking failed\n"); + goto err_resv; + } + + if (shared) { + r = dma_resv_reserve_shared(&resv, 1); + if (r) { + pr_err("Resv shared slot allocation failed\n"); + dma_resv_unlock(&resv); + goto err_resv; + } + + dma_resv_add_shared_fence(&resv, f); + } else { + dma_resv_add_excl_fence(&resv, f); + } + dma_resv_unlock(&resv); + + r = dma_resv_get_fences(&resv, &excl, &i, &fences); + if (r) { + pr_err("get_fences failed\n"); + goto err_free; + } + + if (shared) { + if (excl != NULL) { + pr_err("get_fences returned unexpected excl fence\n"); + goto err_free; + } + if (i != 1 || fences[0] != f) { + pr_err("get_fences returned unexpected shared fence\n"); + goto err_free; + } + } else { + if (excl != f) { + pr_err("get_fences returned unexpected excl fence\n"); + goto err_free; + } + if (i != 0) { + pr_err("get_fences returned unexpected shared fence\n"); + goto err_free; + } + } + + dma_fence_signal(f); +err_free: + dma_fence_put(excl); + while (i--) + dma_fence_put(fences[i]); + kfree(fences); +err_resv: + dma_resv_fini(&resv); + dma_fence_put(f); + return r; +} + +static int test_excl_get_fences(void *arg) +{ + return test_get_fences(arg, false); +} + +static int test_shared_get_fences(void *arg) +{ + return test_get_fences(arg, true); +} + +int dma_resv(void) +{ + static const struct subtest tests[] = { + SUBTEST(sanitycheck), + SUBTEST(test_excl_signaling), + SUBTEST(test_shared_signaling), + SUBTEST(test_excl_for_each), + SUBTEST(test_shared_for_each), + SUBTEST(test_excl_for_each_unlocked), + SUBTEST(test_shared_for_each_unlocked), + SUBTEST(test_excl_get_fences), + SUBTEST(test_shared_get_fences), + }; + + spin_lock_init(&fence_lock); + return subtests(tests, NULL); +} diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index 0039df26854b..ae29fcba9e19 100644 --- a/drivers/gpu/drm/Kconfig +++ b/drivers/gpu/drm/Kconfig @@ -8,6 +8,7 @@ menuconfig DRM tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)" depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA + select DRM_NOMODESET select DRM_PANEL_ORIENTATION_QUIRKS select HDMI select FB_CMDLINE @@ -211,7 +212,7 @@ config DRM_TTM_HELPER Helpers for ttm-based gem objects config DRM_GEM_CMA_HELPER - bool + tristate depends on DRM help Choose this if you need the GEM CMA helper functions @@ -224,7 +225,7 @@ config DRM_KMS_CMA_HELPER Choose this if you need the KMS CMA helper functions config DRM_GEM_SHMEM_HELPER - bool + tristate depends on DRM && MMU help Choose this if you need the GEM shmem helper functions @@ -492,6 +493,15 @@ config DRM_EXPORT_FOR_TESTS config DRM_PANEL_ORIENTATION_QUIRKS tristate +# Separate option because nomodeset parameter is global and expected built-in +config DRM_NOMODESET + bool + default n + config DRM_LIB_RANDOM bool default n + +config DRM_PRIVACY_SCREEN + bool + default n diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 0dff40bb863c..fa16d3e0bbdc 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -4,37 +4,43 @@ # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. drm-y := drm_aperture.o drm_auth.o drm_cache.o \ - drm_file.o drm_gem.o drm_ioctl.o drm_irq.o \ + drm_file.o drm_gem.o drm_ioctl.o \ drm_drv.o \ drm_sysfs.o drm_hashtab.o drm_mm.o \ drm_crtc.o drm_fourcc.o drm_modes.o drm_edid.o drm_displayid.o \ - drm_encoder_slave.o \ drm_trace_points.o drm_prime.o \ - drm_rect.o drm_vma_manager.o drm_flip_work.o \ + drm_vma_manager.o \ drm_modeset_lock.o drm_atomic.o drm_bridge.o \ drm_framebuffer.o drm_connector.o drm_blend.o \ drm_encoder.o drm_mode_object.o drm_property.o \ drm_plane.o drm_color_mgmt.o drm_print.o \ drm_dumb_buffers.o drm_mode_config.o drm_vblank.o \ drm_syncobj.o drm_lease.o drm_writeback.o drm_client.o \ - drm_client_modeset.o drm_atomic_uapi.o drm_hdcp.o \ + drm_client_modeset.o drm_atomic_uapi.o \ drm_managed.o drm_vblank_work.o drm-$(CONFIG_DRM_LEGACY) += drm_agpsupport.o drm_bufs.o drm_context.o drm_dma.o \ - drm_legacy_misc.o drm_lock.o drm_memory.o drm_scatter.o \ - drm_vm.o + drm_irq.o drm_legacy_misc.o drm_lock.o drm_memory.o \ + drm_scatter.o drm_vm.o drm-$(CONFIG_DRM_LIB_RANDOM) += lib/drm_random.o drm-$(CONFIG_COMPAT) += drm_ioc32.o -drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o -drm-$(CONFIG_DRM_GEM_SHMEM_HELPER) += drm_gem_shmem_helper.o drm-$(CONFIG_DRM_PANEL) += drm_panel.o drm-$(CONFIG_OF) += drm_of.o drm-$(CONFIG_PCI) += drm_pci.o drm-$(CONFIG_DEBUG_FS) += drm_debugfs.o drm_debugfs_crc.o drm-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o +drm-$(CONFIG_DRM_PRIVACY_SCREEN) += drm_privacy_screen.o drm_privacy_screen_x86.o obj-$(CONFIG_DRM_DP_AUX_BUS) += drm_dp_aux_bus.o +obj-$(CONFIG_DRM_NOMODESET) += drm_nomodeset.o + +drm_cma_helper-y := drm_gem_cma_helper.o +obj-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_cma_helper.o + +drm_shmem_helper-y := drm_gem_shmem_helper.o +obj-$(CONFIG_DRM_GEM_SHMEM_HELPER) += drm_shmem_helper.o + drm_vram_helper-y := drm_gem_vram_helper.o obj-$(CONFIG_DRM_VRAM_HELPER) += drm_vram_helper.o @@ -42,14 +48,15 @@ drm_ttm_helper-y := drm_gem_ttm_helper.o obj-$(CONFIG_DRM_TTM_HELPER) += drm_ttm_helper.o drm_kms_helper-y := drm_bridge_connector.o drm_crtc_helper.o drm_dp_helper.o \ - drm_dsc.o drm_probe_helper.o \ + drm_dsc.o drm_encoder_slave.o drm_flip_work.o drm_hdcp.o \ + drm_probe_helper.o \ drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \ drm_kms_helper_common.o drm_dp_dual_mode_helper.o \ drm_simple_kms_helper.o drm_modeset_helper.o \ drm_scdc_helper.o drm_gem_atomic_helper.o \ drm_gem_framebuffer_helper.o \ drm_atomic_state_helper.o drm_damage_helper.o \ - drm_format_helper.o drm_self_refresh_helper.o + drm_format_helper.o drm_self_refresh_helper.o drm_rect.o drm_kms_helper-$(CONFIG_DRM_PANEL_BRIDGE) += bridge/panel.o drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index b85b67a88a3d..9f017663ac50 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -458,7 +458,6 @@ struct amdgpu_flip_work { uint64_t base; struct drm_pending_vblank_event *event; struct amdgpu_bo *old_abo; - struct dma_fence *excl; unsigned shared_count; struct dma_fence **shared; struct dma_fence_cb cb; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index dc50c05f23fc..68108f151dad 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -83,9 +83,6 @@ static void amdgpu_display_flip_work_func(struct work_struct *__work) unsigned i; int vpos, hpos; - if (amdgpu_display_flip_handle_fence(work, &work->excl)) - return; - for (i = 0; i < work->shared_count; ++i) if (amdgpu_display_flip_handle_fence(work, &work->shared[i])) return; @@ -203,7 +200,7 @@ int amdgpu_display_crtc_page_flip_target(struct drm_crtc *crtc, goto unpin; } - r = dma_resv_get_fences(new_abo->tbo.base.resv, &work->excl, + r = dma_resv_get_fences(new_abo->tbo.base.resv, NULL, &work->shared_count, &work->shared); if (unlikely(r != 0)) { DRM_ERROR("failed to get fences for buffer\n"); @@ -253,7 +250,6 @@ unreserve: cleanup: amdgpu_bo_unref(&work->old_abo); - dma_fence_put(work->excl); for (i = 0; i < work->shared_count; ++i) dma_fence_put(work->shared[i]); kfree(work->shared); diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index ad95de6399af..438468b82eb6 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -31,7 +31,6 @@ #include "amdgpu_drv.h" #include -#include #include #include #include @@ -2516,10 +2515,8 @@ static int __init amdgpu_init(void) { int r; - if (vgacon_text_force()) { - DRM_ERROR("VGACON disables amdgpu kernel modesetting.\n"); + if (drm_firmware_drivers_only()) return -EINVAL; - } r = amdgpu_sync_init(); if (r) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c index 862eb3c1c4c5..f7d8487799b2 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c @@ -252,41 +252,25 @@ int amdgpu_sync_resv(struct amdgpu_device *adev, struct amdgpu_sync *sync, struct dma_resv *resv, enum amdgpu_sync_mode mode, void *owner) { - struct dma_resv_list *flist; + struct dma_resv_iter cursor; struct dma_fence *f; - unsigned i; - int r = 0; + int r; if (resv == NULL) return -EINVAL; - /* always sync to the exclusive fence */ - f = dma_resv_excl_fence(resv); - dma_fence_chain_for_each(f, f) { - struct dma_fence_chain *chain = to_dma_fence_chain(f); + dma_resv_for_each_fence(&cursor, resv, true, f) { + dma_fence_chain_for_each(f, f) { + struct dma_fence_chain *chain = to_dma_fence_chain(f); - if (amdgpu_sync_test_fence(adev, mode, owner, chain ? - chain->fence : f)) { - r = amdgpu_sync_fence(sync, f); - dma_fence_put(f); - if (r) - return r; - break; - } - } - - flist = dma_resv_shared_list(resv); - if (!flist) - return 0; - - for (i = 0; i < flist->shared_count; ++i) { - f = rcu_dereference_protected(flist->shared[i], - dma_resv_held(resv)); - - if (amdgpu_sync_test_fence(adev, mode, owner, f)) { - r = amdgpu_sync_fence(sync, f); - if (r) - return r; + if (amdgpu_sync_test_fence(adev, mode, owner, chain ? + chain->fence : f)) { + r = amdgpu_sync_fence(sync, f); + dma_fence_put(f); + if (r) + return r; + break; + } } } return 0; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index c875f1cdd2af..c15687ce67c4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -116,17 +116,8 @@ static void amdgpu_evict_flags(struct ttm_buffer_object *bo, abo = ttm_to_amdgpu_bo(bo); if (abo->flags & AMDGPU_AMDKFD_CREATE_SVM_BO) { - struct dma_fence *fence; - struct dma_resv *resv = &bo->base._resv; - - rcu_read_lock(); - fence = rcu_dereference(resv->fence_excl); - if (fence && !fence->ops->signaled) - dma_fence_enable_sw_signaling(fence); - placement->num_placement = 0; placement->num_busy_placement = 0; - rcu_read_unlock(); return; } @@ -1353,10 +1344,9 @@ static bool amdgpu_ttm_bo_eviction_valuable(struct ttm_buffer_object *bo, const struct ttm_place *place) { unsigned long num_pages = bo->resource->num_pages; + struct dma_resv_iter resv_cursor; struct amdgpu_res_cursor cursor; - struct dma_resv_list *flist; struct dma_fence *f; - int i; /* Swapout? */ if (bo->resource->mem_type == TTM_PL_SYSTEM) @@ -1370,14 +1360,9 @@ static bool amdgpu_ttm_bo_eviction_valuable(struct ttm_buffer_object *bo, * If true, then return false as any KFD process needs all its BOs to * be resident to run successfully */ - flist = dma_resv_shared_list(bo->base.resv); - if (flist) { - for (i = 0; i < flist->shared_count; ++i) { - f = rcu_dereference_protected(flist->shared[i], - dma_resv_held(bo->base.resv)); - if (amdkfd_fence_check_mm(f, current->mm)) - return false; - } + dma_resv_for_each_fence(&resv_cursor, bo->base.resv, true, f) { + if (amdkfd_fence_check_mm(f, current->mm)) + return false; } switch (bo->resource->mem_type) { diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 0e7dc23f78e7..a96ae4c0e040 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -2102,30 +2102,14 @@ static void amdgpu_vm_free_mapping(struct amdgpu_device *adev, static void amdgpu_vm_prt_fini(struct amdgpu_device *adev, struct amdgpu_vm *vm) { struct dma_resv *resv = vm->root.bo->tbo.base.resv; - struct dma_fence *excl, **shared; - unsigned i, shared_count; - int r; + struct dma_resv_iter cursor; + struct dma_fence *fence; - r = dma_resv_get_fences(resv, &excl, &shared_count, &shared); - if (r) { - /* Not enough memory to grab the fence list, as last resort - * block for all the fences to complete. - */ - dma_resv_wait_timeout(resv, true, false, - MAX_SCHEDULE_TIMEOUT); - return; - } - - /* Add a callback for each fence in the reservation object */ - amdgpu_vm_prt_get(adev); - amdgpu_vm_add_prt_cb(adev, excl); - - for (i = 0; i < shared_count; ++i) { + dma_resv_for_each_fence(&cursor, resv, true, fence) { + /* Add a callback for each fence in the reservation object */ amdgpu_vm_prt_get(adev); - amdgpu_vm_add_prt_cb(adev, shared[i]); + amdgpu_vm_add_prt_cb(adev, fence); } - - kfree(shared); } /** diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index c27cb47bc988..4595c59f2bf0 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -3012,7 +3012,7 @@ static void handle_hpd_irq_helper(struct amdgpu_dm_connector *aconnector) drm_modeset_unlock_all(dev); if (aconnector->base.force == DRM_FORCE_UNSPECIFIED) - drm_kms_helper_hotplug_event(dev); + drm_kms_helper_connector_hotplug_event(connector); } else if (dc_link_detect(aconnector->dc_link, DETECT_REASON_HPD)) { if (new_connection_type == dc_connection_none && @@ -3027,7 +3027,7 @@ static void handle_hpd_irq_helper(struct amdgpu_dm_connector *aconnector) drm_modeset_unlock_all(dev); if (aconnector->base.force == DRM_FORCE_UNSPECIFIED) - drm_kms_helper_hotplug_event(dev); + drm_kms_helper_connector_hotplug_event(connector); } mutex_unlock(&aconnector->hpd_lock); @@ -3221,7 +3221,7 @@ out: dm_restore_drm_connector_state(dev, connector); drm_modeset_unlock_all(dev); - drm_kms_helper_hotplug_event(dev); + drm_kms_helper_connector_hotplug_event(connector); } else if (dc_link_detect(dc_link, DETECT_REASON_HPDRX)) { if (aconnector->fake_enable) @@ -3234,7 +3234,7 @@ out: dm_restore_drm_connector_state(dev, connector); drm_modeset_unlock_all(dev); - drm_kms_helper_hotplug_event(dev); + drm_kms_helper_connector_hotplug_event(connector); } } #ifdef CONFIG_DRM_AMD_DC_HDCP diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c index 9d43ecb1f692..0277685864c5 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_debugfs.c @@ -1243,7 +1243,7 @@ static ssize_t trigger_hotplug(struct file *f, const char __user *buf, dm_restore_drm_connector_state(dev, connector); drm_modeset_unlock_all(dev); - drm_kms_helper_hotplug_event(dev); + drm_kms_helper_connector_hotplug_event(connector); } else if (param[0] == 0) { if (!aconnector->dc_link) goto unlock; @@ -1265,7 +1265,7 @@ static ssize_t trigger_hotplug(struct file *f, const char __user *buf, dm_restore_drm_connector_state(dev, connector); drm_modeset_unlock_all(dev); - drm_kms_helper_hotplug_event(dev); + drm_kms_helper_connector_hotplug_event(connector); } unlock: diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c index 86d5cd7b6318..6d8613f6fe1c 100644 --- a/drivers/gpu/drm/ast/ast_drv.c +++ b/drivers/gpu/drm/ast/ast_drv.c @@ -26,7 +26,6 @@ * Authors: Dave Airlie */ -#include #include #include @@ -233,7 +232,7 @@ static struct pci_driver ast_pci_driver = { static int __init ast_init(void) { - if (vgacon_text_force() && ast_modeset == -1) + if (drm_firmware_drivers_only() && ast_modeset == -1) return -EINVAL; if (ast_modeset == 0) diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 431b6e12a81f..61db5a66b493 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -182,6 +182,7 @@ config DRM_PARADE_PS8622 config DRM_PARADE_PS8640 tristate "Parade PS8640 MIPI DSI to eDP Converter" depends on OF + select DRM_DP_AUX_BUS select DRM_KMS_HELPER select DRM_MIPI_DSI select DRM_PANEL diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511.h b/drivers/gpu/drm/bridge/adv7511/adv7511.h index 05e3abb5a0c9..592ecfcf00ca 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511.h +++ b/drivers/gpu/drm/bridge/adv7511/adv7511.h @@ -401,7 +401,6 @@ void adv7533_mode_set(struct adv7511 *adv, const struct drm_display_mode *mode); int adv7533_patch_registers(struct adv7511 *adv); int adv7533_patch_cec_registers(struct adv7511 *adv); int adv7533_attach_dsi(struct adv7511 *adv); -void adv7533_detach_dsi(struct adv7511 *adv); int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv); #ifdef CONFIG_DRM_I2C_ADV7511_AUDIO diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c index 76555ae64e9c..f8e5da148599 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c @@ -910,9 +910,6 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge, return ret; } - if (adv->type == ADV7533 || adv->type == ADV7535) - ret = adv7533_attach_dsi(adv); - if (adv->i2c_main->irq) regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0), ADV7511_INT0_HPD); @@ -1288,8 +1285,18 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id) drm_bridge_add(&adv7511->bridge); adv7511_audio_init(dev, adv7511); + + if (adv7511->type == ADV7533 || adv7511->type == ADV7535) { + ret = adv7533_attach_dsi(adv7511); + if (ret) + goto err_unregister_audio; + } + return 0; +err_unregister_audio: + adv7511_audio_exit(adv7511); + drm_bridge_remove(&adv7511->bridge); err_unregister_cec: i2c_unregister_device(adv7511->i2c_cec); clk_disable_unprepare(adv7511->cec_clk); @@ -1307,8 +1314,6 @@ static int adv7511_remove(struct i2c_client *i2c) { struct adv7511 *adv7511 = i2c_get_clientdata(i2c); - if (adv7511->type == ADV7533 || adv7511->type == ADV7535) - adv7533_detach_dsi(adv7511); i2c_unregister_device(adv7511->i2c_cec); clk_disable_unprepare(adv7511->cec_clk); diff --git a/drivers/gpu/drm/bridge/adv7511/adv7533.c b/drivers/gpu/drm/bridge/adv7511/adv7533.c index 59d718bde8c4..eb7579dec40a 100644 --- a/drivers/gpu/drm/bridge/adv7511/adv7533.c +++ b/drivers/gpu/drm/bridge/adv7511/adv7533.c @@ -153,11 +153,10 @@ int adv7533_attach_dsi(struct adv7511 *adv) return -EPROBE_DEFER; } - dsi = mipi_dsi_device_register_full(host, &info); + dsi = devm_mipi_dsi_device_register_full(dev, host, &info); if (IS_ERR(dsi)) { dev_err(dev, "failed to create dsi device\n"); - ret = PTR_ERR(dsi); - goto err_dsi_device; + return PTR_ERR(dsi); } adv->dsi = dsi; @@ -167,24 +166,13 @@ int adv7533_attach_dsi(struct adv7511 *adv) dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_VIDEO_HSE; - ret = mipi_dsi_attach(dsi); + ret = devm_mipi_dsi_attach(dev, dsi); if (ret < 0) { dev_err(dev, "failed to attach dsi to host\n"); - goto err_dsi_attach; + return ret; } return 0; - -err_dsi_attach: - mipi_dsi_device_unregister(dsi); -err_dsi_device: - return ret; -} - -void adv7533_detach_dsi(struct adv7511 *adv) -{ - mipi_dsi_detach(adv->dsi); - mipi_dsi_device_unregister(adv->dsi); } int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv) diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c index cab6c8b92efd..6a4f20fccf84 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c @@ -998,11 +998,21 @@ int analogix_dp_send_psr_spd(struct analogix_dp_device *dp, if (!blocking) return 0; + /* + * db[1]!=0: entering PSR, wait for fully active remote frame buffer. + * db[1]==0: exiting PSR, wait for either + * (a) ACTIVE_RESYNC - the sink "must display the + * incoming active frames from the Source device with no visible + * glitches and/or artifacts", even though timings may still be + * re-synchronizing; or + * (b) INACTIVE - the transition is fully complete. + */ ret = readx_poll_timeout(analogix_dp_get_psr_status, dp, psr_status, psr_status >= 0 && ((vsc->db[1] && psr_status == DP_PSR_SINK_ACTIVE_RFB) || - (!vsc->db[1] && psr_status == DP_PSR_SINK_INACTIVE)), 1500, - DP_TIMEOUT_PSR_LOOP_MS * 1000); + (!vsc->db[1] && (psr_status == DP_PSR_SINK_ACTIVE_RESYNC || + psr_status == DP_PSR_SINK_INACTIVE))), + 1500, DP_TIMEOUT_PSR_LOOP_MS * 1000); if (ret) { dev_warn(dp->dev, "Failed to apply PSR %d\n", ret); return ret; diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 1a871f6b6822..2346dbcc505f 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -32,6 +32,8 @@ #include #include +#include +#include #include