xprtrdma: RPC completion should wait for Send completion

When an RPC Call includes a file data payload, that payload can come
from pages in the page cache, or a user buffer (for direct I/O).

If the payload can fit inline, xprtrdma includes it in the Send
using a scatter-gather technique. xprtrdma mustn't allow the RPC
consumer to re-use the memory where that payload resides before the
Send completes. Otherwise, the new contents of that memory would be
exposed by an HCA retransmit of the Send operation.

So, block RPC completion on Send completion, but only in the case
where a separate file data payload is part of the Send. This
prevents the reuse of that memory while it is still part of a Send
operation without an undue cost to other cases.

Waiting is avoided in the common case because typically the Send
will have completed long before the RPC Reply arrives.

These days, an RPC timeout will trigger a disconnect, which tears
down the QP. The disconnect flushes all waiting Sends. This bounds
the amount of time the reply handler has to wait for a Send
completion.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This commit is contained in:
Chuck Lever 2017-10-20 10:48:36 -04:00 committed by Anna Schumaker
parent 0ba6f37012
commit 01bb35c89d
4 changed files with 34 additions and 4 deletions

View File

@ -534,6 +534,11 @@ rpcrdma_unmap_sendctx(struct rpcrdma_sendctx *sc)
for (count = sc->sc_unmap_count; count; ++sge, --count)
ib_dma_unmap_page(ia->ri_device,
sge->addr, sge->length, DMA_TO_DEVICE);
if (test_and_clear_bit(RPCRDMA_REQ_F_TX_RESOURCES, &sc->sc_req->rl_flags)) {
smp_mb__after_atomic();
wake_up_bit(&sc->sc_req->rl_flags, RPCRDMA_REQ_F_TX_RESOURCES);
}
}
/* Prepare an SGE for the RPC-over-RDMA transport header.
@ -667,6 +672,8 @@ map_tail:
out:
sc->sc_wr.num_sge += sge_no;
if (sc->sc_unmap_count)
__set_bit(RPCRDMA_REQ_F_TX_RESOURCES, &req->rl_flags);
return true;
out_regbuf:
@ -704,6 +711,8 @@ rpcrdma_prepare_send_sges(struct rpcrdma_xprt *r_xprt,
return -ENOBUFS;
req->rl_sendctx->sc_wr.num_sge = 0;
req->rl_sendctx->sc_unmap_count = 0;
req->rl_sendctx->sc_req = req;
__clear_bit(RPCRDMA_REQ_F_TX_RESOURCES, &req->rl_flags);
if (!rpcrdma_prepare_hdr_sge(&r_xprt->rx_ia, req, hdrlen))
return -EIO;
@ -1305,6 +1314,20 @@ void rpcrdma_release_rqst(struct rpcrdma_xprt *r_xprt, struct rpcrdma_req *req)
if (!list_empty(&req->rl_registered))
r_xprt->rx_ia.ri_ops->ro_unmap_sync(r_xprt,
&req->rl_registered);
/* Ensure that any DMA mapped pages associated with
* the Send of the RPC Call have been unmapped before
* allowing the RPC to complete. This protects argument
* memory not controlled by the RPC client from being
* re-used before we're done with it.
*/
if (test_bit(RPCRDMA_REQ_F_TX_RESOURCES, &req->rl_flags)) {
r_xprt->rx_stats.reply_waits_for_send++;
out_of_line_wait_on_bit(&req->rl_flags,
RPCRDMA_REQ_F_TX_RESOURCES,
bit_wait,
TASK_UNINTERRUPTIBLE);
}
}
/* Reply handling runs in the poll worker thread. Anything that
@ -1384,7 +1407,8 @@ void rpcrdma_reply_handler(struct rpcrdma_rep *rep)
dprintk("RPC: %s: reply %p completes request %p (xid 0x%08x)\n",
__func__, rep, req, be32_to_cpu(rep->rr_xid));
if (list_empty(&req->rl_registered))
if (list_empty(&req->rl_registered) &&
!test_bit(RPCRDMA_REQ_F_TX_RESOURCES, &req->rl_flags))
rpcrdma_complete_rqst(rep);
else
queue_work(rpcrdma_receive_wq, &rep->rr_work);

View File

@ -789,12 +789,13 @@ void xprt_rdma_print_stats(struct rpc_xprt *xprt, struct seq_file *seq)
r_xprt->rx_stats.failed_marshal_count,
r_xprt->rx_stats.bad_reply_count,
r_xprt->rx_stats.nomsg_call_count);
seq_printf(seq, "%lu %lu %lu %lu %lu\n",
seq_printf(seq, "%lu %lu %lu %lu %lu %lu\n",
r_xprt->rx_stats.mrs_recovered,
r_xprt->rx_stats.mrs_orphaned,
r_xprt->rx_stats.mrs_allocated,
r_xprt->rx_stats.local_inv_needed,
r_xprt->rx_stats.empty_sendctx_q);
r_xprt->rx_stats.empty_sendctx_q,
r_xprt->rx_stats.reply_waits_for_send);
}
static int

View File

@ -1526,7 +1526,8 @@ rpcrdma_ep_post(struct rpcrdma_ia *ia,
dprintk("RPC: %s: posting %d s/g entries\n",
__func__, send_wr->num_sge);
if (!ep->rep_send_count) {
if (!ep->rep_send_count ||
test_bit(RPCRDMA_REQ_F_TX_RESOURCES, &req->rl_flags)) {
send_wr->send_flags |= IB_SEND_SIGNALED;
ep->rep_send_count = ep->rep_send_batch;
} else {

View File

@ -236,11 +236,13 @@ struct rpcrdma_rep {
/* struct rpcrdma_sendctx - DMA mapped SGEs to unmap after Send completes
*/
struct rpcrdma_req;
struct rpcrdma_xprt;
struct rpcrdma_sendctx {
struct ib_send_wr sc_wr;
struct ib_cqe sc_cqe;
struct rpcrdma_xprt *sc_xprt;
struct rpcrdma_req *sc_req;
unsigned int sc_unmap_count;
struct ib_sge sc_sges[];
};
@ -387,6 +389,7 @@ struct rpcrdma_req {
enum {
RPCRDMA_REQ_F_BACKCHANNEL = 0,
RPCRDMA_REQ_F_PENDING,
RPCRDMA_REQ_F_TX_RESOURCES,
};
static inline void
@ -492,6 +495,7 @@ struct rpcrdma_stats {
/* accessed when receiving a reply */
unsigned long long total_rdma_reply;
unsigned long long fixup_copy_count;
unsigned long reply_waits_for_send;
unsigned long local_inv_needed;
unsigned long nomsg_call_count;
unsigned long bcall_count;