iio: humidity: Add TI HDC20x0 support
Add driver support for HDC2010/2080 series devices and sysfs documentation for their heater element. HDC2010 is an integrated high-accuracy humidity and temperature sensor with very low power consumption. The device includes a resistive heating element. The temperature range is -40C to 125C with 0.2C accuracy. Humidity measurement is 0 to 100% with 2% RH accuracy. Signed-off-by: Eugene Zaikonnikov <ez@norphonic.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This commit is contained in:
Eugene Zaikonnikov
Jonathan Cameron
parent
fe184be8c3
commit
0115a63c99
9
Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
Normal file
9
Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
Normal file
@ -0,0 +1,9 @@
|
|||||||
|
What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw
|
||||||
|
What: /sys/bus/iio/devices/iio:deviceX/out_current_heater_raw_available
|
||||||
|
KernelVersion: 5.3.8
|
||||||
|
Contact: linux-iio@vger.kernel.org
|
||||||
|
Description:
|
||||||
|
Controls the heater device within the humidity sensor to get
|
||||||
|
rid of excess condensation.
|
||||||
|
|
||||||
|
Valid control values are 0 = OFF, and 1 = ON.
|
||||||
@ -38,6 +38,16 @@ config HDC100X
|
|||||||
To compile this driver as a module, choose M here: the module
|
To compile this driver as a module, choose M here: the module
|
||||||
will be called hdc100x.
|
will be called hdc100x.
|
||||||
|
|
||||||
|
config HDC2010
|
||||||
|
tristate "TI HDC2010 relative humidity and temperature sensor"
|
||||||
|
depends on I2C
|
||||||
|
help
|
||||||
|
Say yes here to build support for the Texas Instruments
|
||||||
|
HDC2010 and HDC2080 relative humidity and temperature sensors.
|
||||||
|
|
||||||
|
To compile this driver as a module, choose M here: the module
|
||||||
|
will be called hdc2010.
|
||||||
|
|
||||||
config HID_SENSOR_HUMIDITY
|
config HID_SENSOR_HUMIDITY
|
||||||
tristate "HID Environmental humidity sensor"
|
tristate "HID Environmental humidity sensor"
|
||||||
depends on HID_SENSOR_HUB
|
depends on HID_SENSOR_HUB
|
||||||
|
|||||||
@ -6,6 +6,7 @@
|
|||||||
obj-$(CONFIG_AM2315) += am2315.o
|
obj-$(CONFIG_AM2315) += am2315.o
|
||||||
obj-$(CONFIG_DHT11) += dht11.o
|
obj-$(CONFIG_DHT11) += dht11.o
|
||||||
obj-$(CONFIG_HDC100X) += hdc100x.o
|
obj-$(CONFIG_HDC100X) += hdc100x.o
|
||||||
|
obj-$(CONFIG_HDC2010) += hdc2010.o
|
||||||
obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o
|
obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o
|
||||||
|
|
||||||
hts221-y := hts221_core.o \
|
hts221-y := hts221_core.o \
|
||||||
|
|||||||
353
drivers/iio/humidity/hdc2010.c
Normal file
353
drivers/iio/humidity/hdc2010.c
Normal file
@ -0,0 +1,353 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0+
|
||||||
|
/*
|
||||||
|
* hdc2010.c - Support for the TI HDC2010 and HDC2080
|
||||||
|
* temperature + relative humidity sensors
|
||||||
|
*
|
||||||
|
* Copyright (C) 2020 Norphonic AS
|
||||||
|
* Author: Eugene Zaikonnikov <ez@norphonic.com>
|
||||||
|
*
|
||||||
|
* Datasheet: https://www.ti.com/product/HDC2010/datasheet
|
||||||
|
* Datasheet: https://www.ti.com/product/HDC2080/datasheet
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <linux/module.h>
|
||||||
|
#include <linux/init.h>
|
||||||
|
#include <linux/i2c.h>
|
||||||
|
#include <linux/bitops.h>
|
||||||
|
|
||||||
|
#include <linux/iio/iio.h>
|
||||||
|
#include <linux/iio/sysfs.h>
|
||||||
|
|
||||||
|
#define HDC2010_REG_TEMP_LOW 0x00
|
||||||
|
#define HDC2010_REG_TEMP_HIGH 0x01
|
||||||
|
#define HDC2010_REG_HUMIDITY_LOW 0x02
|
||||||
|
#define HDC2010_REG_HUMIDITY_HIGH 0x03
|
||||||
|
#define HDC2010_REG_INTERRUPT_DRDY 0x04
|
||||||
|
#define HDC2010_REG_TEMP_MAX 0x05
|
||||||
|
#define HDC2010_REG_HUMIDITY_MAX 0x06
|
||||||
|
#define HDC2010_REG_INTERRUPT_EN 0x07
|
||||||
|
#define HDC2010_REG_TEMP_OFFSET_ADJ 0x08
|
||||||
|
#define HDC2010_REG_HUMIDITY_OFFSET_ADJ 0x09
|
||||||
|
#define HDC2010_REG_TEMP_THR_L 0x0a
|
||||||
|
#define HDC2010_REG_TEMP_THR_H 0x0b
|
||||||
|
#define HDC2010_REG_RH_THR_L 0x0c
|
||||||
|
#define HDC2010_REG_RH_THR_H 0x0d
|
||||||
|
#define HDC2010_REG_RESET_DRDY_INT_CONF 0x0e
|
||||||
|
#define HDC2010_REG_MEASUREMENT_CONF 0x0f
|
||||||
|
|
||||||
|
#define HDC2010_MEAS_CONF GENMASK(2, 1)
|
||||||
|
#define HDC2010_MEAS_TRIG BIT(0)
|
||||||
|
#define HDC2010_HEATER_EN BIT(3)
|
||||||
|
#define HDC2010_AMM GENMASK(6, 4)
|
||||||
|
|
||||||
|
struct hdc2010_data {
|
||||||
|
struct i2c_client *client;
|
||||||
|
struct mutex lock;
|
||||||
|
u8 measurement_config;
|
||||||
|
u8 interrupt_config;
|
||||||
|
u8 drdy_config;
|
||||||
|
};
|
||||||
|
|
||||||
|
enum hdc2010_addr_groups {
|
||||||
|
HDC2010_GROUP_TEMP = 0,
|
||||||
|
HDC2010_GROUP_HUMIDITY,
|
||||||
|
};
|
||||||
|
|
||||||
|
struct hdc2010_reg_record {
|
||||||
|
unsigned long primary;
|
||||||
|
unsigned long peak;
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct hdc2010_reg_record hdc2010_reg_translation[] = {
|
||||||
|
[HDC2010_GROUP_TEMP] = {
|
||||||
|
.primary = HDC2010_REG_TEMP_LOW,
|
||||||
|
.peak = HDC2010_REG_TEMP_MAX,
|
||||||
|
},
|
||||||
|
[HDC2010_GROUP_HUMIDITY] = {
|
||||||
|
.primary = HDC2010_REG_HUMIDITY_LOW,
|
||||||
|
.peak = HDC2010_REG_HUMIDITY_MAX,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static IIO_CONST_ATTR(out_current_heater_raw_available, "0 1");
|
||||||
|
|
||||||
|
static struct attribute *hdc2010_attributes[] = {
|
||||||
|
&iio_const_attr_out_current_heater_raw_available.dev_attr.attr,
|
||||||
|
NULL
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct attribute_group hdc2010_attribute_group = {
|
||||||
|
.attrs = hdc2010_attributes,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct iio_chan_spec hdc2010_channels[] = {
|
||||||
|
{
|
||||||
|
.type = IIO_TEMP,
|
||||||
|
.address = HDC2010_GROUP_TEMP,
|
||||||
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
||||||
|
BIT(IIO_CHAN_INFO_PEAK) |
|
||||||
|
BIT(IIO_CHAN_INFO_OFFSET) |
|
||||||
|
BIT(IIO_CHAN_INFO_SCALE),
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.type = IIO_HUMIDITYRELATIVE,
|
||||||
|
.address = HDC2010_GROUP_HUMIDITY,
|
||||||
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
|
||||||
|
BIT(IIO_CHAN_INFO_PEAK) |
|
||||||
|
BIT(IIO_CHAN_INFO_SCALE),
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.type = IIO_CURRENT,
|
||||||
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
||||||
|
.extend_name = "heater",
|
||||||
|
.output = 1,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static int hdc2010_update_drdy_config(struct hdc2010_data *data,
|
||||||
|
char mask, char val)
|
||||||
|
{
|
||||||
|
u8 tmp = (~mask & data->drdy_config) | val;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = i2c_smbus_write_byte_data(data->client,
|
||||||
|
HDC2010_REG_RESET_DRDY_INT_CONF, tmp);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
data->drdy_config = tmp;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int hdc2010_get_prim_measurement_word(struct hdc2010_data *data,
|
||||||
|
struct iio_chan_spec const *chan)
|
||||||
|
{
|
||||||
|
struct i2c_client *client = data->client;
|
||||||
|
s32 ret;
|
||||||
|
|
||||||
|
ret = i2c_smbus_read_word_data(client,
|
||||||
|
hdc2010_reg_translation[chan->address].primary);
|
||||||
|
|
||||||
|
if (ret < 0)
|
||||||
|
dev_err(&client->dev, "Could not read sensor measurement word\n");
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int hdc2010_get_peak_measurement_byte(struct hdc2010_data *data,
|
||||||
|
struct iio_chan_spec const *chan)
|
||||||
|
{
|
||||||
|
struct i2c_client *client = data->client;
|
||||||
|
s32 ret;
|
||||||
|
|
||||||
|
ret = i2c_smbus_read_byte_data(client,
|
||||||
|
hdc2010_reg_translation[chan->address].peak);
|
||||||
|
|
||||||
|
if (ret < 0)
|
||||||
|
dev_err(&client->dev, "Could not read sensor measurement byte\n");
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int hdc2010_get_heater_status(struct hdc2010_data *data)
|
||||||
|
{
|
||||||
|
return !!(data->drdy_config & HDC2010_HEATER_EN);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int hdc2010_read_raw(struct iio_dev *indio_dev,
|
||||||
|
struct iio_chan_spec const *chan, int *val,
|
||||||
|
int *val2, long mask)
|
||||||
|
{
|
||||||
|
struct hdc2010_data *data = iio_priv(indio_dev);
|
||||||
|
|
||||||
|
switch (mask) {
|
||||||
|
case IIO_CHAN_INFO_RAW: {
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
if (chan->type == IIO_CURRENT) {
|
||||||
|
*val = hdc2010_get_heater_status(data);
|
||||||
|
return IIO_VAL_INT;
|
||||||
|
}
|
||||||
|
ret = iio_device_claim_direct_mode(indio_dev);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
mutex_lock(&data->lock);
|
||||||
|
ret = hdc2010_get_prim_measurement_word(data, chan);
|
||||||
|
mutex_unlock(&data->lock);
|
||||||
|
iio_device_release_direct_mode(indio_dev);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
*val = ret;
|
||||||
|
return IIO_VAL_INT;
|
||||||
|
}
|
||||||
|
case IIO_CHAN_INFO_PEAK: {
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = iio_device_claim_direct_mode(indio_dev);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
mutex_lock(&data->lock);
|
||||||
|
ret = hdc2010_get_peak_measurement_byte(data, chan);
|
||||||
|
mutex_unlock(&data->lock);
|
||||||
|
iio_device_release_direct_mode(indio_dev);
|
||||||
|
if (ret < 0)
|
||||||
|
return ret;
|
||||||
|
/* Scaling up the value so we can use same offset as RAW */
|
||||||
|
*val = ret * 256;
|
||||||
|
return IIO_VAL_INT;
|
||||||
|
}
|
||||||
|
case IIO_CHAN_INFO_SCALE:
|
||||||
|
*val2 = 65536;
|
||||||
|
if (chan->type == IIO_TEMP)
|
||||||
|
*val = 165000;
|
||||||
|
else
|
||||||
|
*val = 100000;
|
||||||
|
return IIO_VAL_FRACTIONAL;
|
||||||
|
case IIO_CHAN_INFO_OFFSET:
|
||||||
|
*val = -15887;
|
||||||
|
*val2 = 515151;
|
||||||
|
return IIO_VAL_INT_PLUS_MICRO;
|
||||||
|
default:
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static int hdc2010_write_raw(struct iio_dev *indio_dev,
|
||||||
|
struct iio_chan_spec const *chan,
|
||||||
|
int val, int val2, long mask)
|
||||||
|
{
|
||||||
|
struct hdc2010_data *data = iio_priv(indio_dev);
|
||||||
|
int new, ret;
|
||||||
|
|
||||||
|
switch (mask) {
|
||||||
|
case IIO_CHAN_INFO_RAW:
|
||||||
|
if (chan->type != IIO_CURRENT || val2 != 0)
|
||||||
|
return -EINVAL;
|
||||||
|
|
||||||
|
switch (val) {
|
||||||
|
case 1:
|
||||||
|
new = HDC2010_HEATER_EN;
|
||||||
|
break;
|
||||||
|
case 0:
|
||||||
|
new = 0;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
|
||||||
|
mutex_lock(&data->lock);
|
||||||
|
ret = hdc2010_update_drdy_config(data, HDC2010_HEATER_EN, new);
|
||||||
|
mutex_unlock(&data->lock);
|
||||||
|
return ret;
|
||||||
|
default:
|
||||||
|
return -EINVAL;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct iio_info hdc2010_info = {
|
||||||
|
.read_raw = hdc2010_read_raw,
|
||||||
|
.write_raw = hdc2010_write_raw,
|
||||||
|
.attrs = &hdc2010_attribute_group,
|
||||||
|
};
|
||||||
|
|
||||||
|
static int hdc2010_probe(struct i2c_client *client,
|
||||||
|
const struct i2c_device_id *id)
|
||||||
|
{
|
||||||
|
struct iio_dev *indio_dev;
|
||||||
|
struct hdc2010_data *data;
|
||||||
|
u8 tmp;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
if (!i2c_check_functionality(client->adapter,
|
||||||
|
I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_I2C))
|
||||||
|
return -EOPNOTSUPP;
|
||||||
|
|
||||||
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
||||||
|
if (!indio_dev)
|
||||||
|
return -ENOMEM;
|
||||||
|
|
||||||
|
data = iio_priv(indio_dev);
|
||||||
|
i2c_set_clientdata(client, indio_dev);
|
||||||
|
data->client = client;
|
||||||
|
mutex_init(&data->lock);
|
||||||
|
|
||||||
|
indio_dev->dev.parent = &client->dev;
|
||||||
|
/*
|
||||||
|
* As DEVICE ID register does not differentiate between
|
||||||
|
* HDC2010 and HDC2080, we have the name hardcoded
|
||||||
|
*/
|
||||||
|
indio_dev->name = "hdc2010";
|
||||||
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||||
|
indio_dev->info = &hdc2010_info;
|
||||||
|
|
||||||
|
indio_dev->channels = hdc2010_channels;
|
||||||
|
indio_dev->num_channels = ARRAY_SIZE(hdc2010_channels);
|
||||||
|
|
||||||
|
/* Enable Automatic Measurement Mode at 5Hz */
|
||||||
|
ret = hdc2010_update_drdy_config(data, HDC2010_AMM, HDC2010_AMM);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* We enable both temp and humidity measurement.
|
||||||
|
* However the measurement won't start even in AMM until triggered.
|
||||||
|
*/
|
||||||
|
tmp = (data->measurement_config & ~HDC2010_MEAS_CONF) |
|
||||||
|
HDC2010_MEAS_TRIG;
|
||||||
|
|
||||||
|
ret = i2c_smbus_write_byte_data(client, HDC2010_REG_MEASUREMENT_CONF, tmp);
|
||||||
|
if (ret) {
|
||||||
|
dev_warn(&client->dev, "Unable to set up measurement\n");
|
||||||
|
if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0))
|
||||||
|
dev_warn(&client->dev, "Unable to restore default AMM\n");
|
||||||
|
return ret;
|
||||||
|
};
|
||||||
|
|
||||||
|
data->measurement_config = tmp;
|
||||||
|
|
||||||
|
return iio_device_register(indio_dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int hdc2010_remove(struct i2c_client *client)
|
||||||
|
{
|
||||||
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
||||||
|
struct hdc2010_data *data = iio_priv(indio_dev);
|
||||||
|
|
||||||
|
iio_device_unregister(indio_dev);
|
||||||
|
|
||||||
|
/* Disable Automatic Measurement Mode */
|
||||||
|
if (hdc2010_update_drdy_config(data, HDC2010_AMM, 0))
|
||||||
|
dev_warn(&client->dev, "Unable to restore default AMM\n");
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct i2c_device_id hdc2010_id[] = {
|
||||||
|
{ "hdc2010" },
|
||||||
|
{ "hdc2080" },
|
||||||
|
{ }
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(i2c, hdc2010_id);
|
||||||
|
|
||||||
|
static const struct of_device_id hdc2010_dt_ids[] = {
|
||||||
|
{ .compatible = "ti,hdc2010" },
|
||||||
|
{ .compatible = "ti,hdc2080" },
|
||||||
|
{ }
|
||||||
|
};
|
||||||
|
MODULE_DEVICE_TABLE(of, hdc2010_dt_ids);
|
||||||
|
|
||||||
|
static struct i2c_driver hdc2010_driver = {
|
||||||
|
.driver = {
|
||||||
|
.name = "hdc2010",
|
||||||
|
.of_match_table = hdc2010_dt_ids,
|
||||||
|
},
|
||||||
|
.probe = hdc2010_probe,
|
||||||
|
.remove = hdc2010_remove,
|
||||||
|
.id_table = hdc2010_id,
|
||||||
|
};
|
||||||
|
module_i2c_driver(hdc2010_driver);
|
||||||
|
|
||||||
|
MODULE_AUTHOR("Eugene Zaikonnikov <ez@norphonic.com>");
|
||||||
|
MODULE_DESCRIPTION("TI HDC2010 humidity and temperature sensor driver");
|
||||||
|
MODULE_LICENSE("GPL");
|
||||||
Loading…
Reference in New Issue
Block a user