drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
/*
|
|
|
|
* Copyright © 2011-2012 Intel Corporation
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice (including the next
|
|
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
|
|
* Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
|
|
* IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* Authors:
|
|
|
|
* Ben Widawsky <ben@bwidawsk.net>
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This file implements HW context support. On gen5+ a HW context consists of an
|
|
|
|
* opaque GPU object which is referenced at times of context saves and restores.
|
|
|
|
* With RC6 enabled, the context is also referenced as the GPU enters and exists
|
|
|
|
* from RC6 (GPU has it's own internal power context, except on gen5). Though
|
|
|
|
* something like a context does exist for the media ring, the code only
|
|
|
|
* supports contexts for the render ring.
|
|
|
|
*
|
|
|
|
* In software, there is a distinction between contexts created by the user,
|
|
|
|
* and the default HW context. The default HW context is used by GPU clients
|
|
|
|
* that do not request setup of their own hardware context. The default
|
|
|
|
* context's state is never restored to help prevent programming errors. This
|
|
|
|
* would happen if a client ran and piggy-backed off another clients GPU state.
|
|
|
|
* The default context only exists to give the GPU some offset to load as the
|
|
|
|
* current to invoke a save of the context we actually care about. In fact, the
|
|
|
|
* code could likely be constructed, albeit in a more complicated fashion, to
|
|
|
|
* never use the default context, though that limits the driver's ability to
|
|
|
|
* swap out, and/or destroy other contexts.
|
|
|
|
*
|
|
|
|
* All other contexts are created as a request by the GPU client. These contexts
|
|
|
|
* store GPU state, and thus allow GPU clients to not re-emit state (and
|
|
|
|
* potentially query certain state) at any time. The kernel driver makes
|
|
|
|
* certain that the appropriate commands are inserted.
|
|
|
|
*
|
|
|
|
* The context life cycle is semi-complicated in that context BOs may live
|
|
|
|
* longer than the context itself because of the way the hardware, and object
|
|
|
|
* tracking works. Below is a very crude representation of the state machine
|
|
|
|
* describing the context life.
|
|
|
|
* refcount pincount active
|
|
|
|
* S0: initial state 0 0 0
|
|
|
|
* S1: context created 1 0 0
|
|
|
|
* S2: context is currently running 2 1 X
|
|
|
|
* S3: GPU referenced, but not current 2 0 1
|
|
|
|
* S4: context is current, but destroyed 1 1 0
|
|
|
|
* S5: like S3, but destroyed 1 0 1
|
|
|
|
*
|
|
|
|
* The most common (but not all) transitions:
|
|
|
|
* S0->S1: client creates a context
|
|
|
|
* S1->S2: client submits execbuf with context
|
|
|
|
* S2->S3: other clients submits execbuf with context
|
|
|
|
* S3->S1: context object was retired
|
|
|
|
* S3->S2: clients submits another execbuf
|
|
|
|
* S2->S4: context destroy called with current context
|
|
|
|
* S3->S5->S0: destroy path
|
|
|
|
* S4->S5->S0: destroy path on current context
|
|
|
|
*
|
|
|
|
* There are two confusing terms used above:
|
|
|
|
* The "current context" means the context which is currently running on the
|
2013-08-30 13:40:26 +00:00
|
|
|
* GPU. The GPU has loaded its state already and has stored away the gtt
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
* offset of the BO. The GPU is not actively referencing the data at this
|
|
|
|
* offset, but it will on the next context switch. The only way to avoid this
|
|
|
|
* is to do a GPU reset.
|
|
|
|
*
|
|
|
|
* An "active context' is one which was previously the "current context" and is
|
|
|
|
* on the active list waiting for the next context switch to occur. Until this
|
|
|
|
* happens, the object must remain at the same gtt offset. It is therefore
|
|
|
|
* possible to destroy a context, but it is still active.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
2012-10-02 17:01:07 +00:00
|
|
|
#include <drm/drmP.h>
|
|
|
|
#include <drm/i915_drm.h>
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
#include "i915_drv.h"
|
2014-11-10 13:44:31 +00:00
|
|
|
#include "i915_trace.h"
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
|
2012-06-04 21:42:43 +00:00
|
|
|
/* This is a HW constraint. The value below is the largest known requirement
|
|
|
|
* I've seen in a spec to date, and that was a workaround for a non-shipping
|
|
|
|
* part. It should be safe to decrease this, but it's more future proof as is.
|
|
|
|
*/
|
2013-12-06 22:10:59 +00:00
|
|
|
#define GEN6_CONTEXT_ALIGN (64<<10)
|
|
|
|
#define GEN7_CONTEXT_ALIGN 4096
|
2012-06-04 21:42:43 +00:00
|
|
|
|
2013-12-06 22:10:59 +00:00
|
|
|
static size_t get_context_alignment(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
if (IS_GEN6(dev))
|
|
|
|
return GEN6_CONTEXT_ALIGN;
|
|
|
|
|
|
|
|
return GEN7_CONTEXT_ALIGN;
|
|
|
|
}
|
|
|
|
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
static int get_context_size(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
int ret;
|
|
|
|
u32 reg;
|
|
|
|
|
|
|
|
switch (INTEL_INFO(dev)->gen) {
|
|
|
|
case 6:
|
|
|
|
reg = I915_READ(CXT_SIZE);
|
|
|
|
ret = GEN6_CXT_TOTAL_SIZE(reg) * 64;
|
|
|
|
break;
|
|
|
|
case 7:
|
2012-07-18 17:10:09 +00:00
|
|
|
reg = I915_READ(GEN7_CXT_SIZE);
|
2012-07-25 03:47:30 +00:00
|
|
|
if (IS_HASWELL(dev))
|
2013-06-26 04:53:40 +00:00
|
|
|
ret = HSW_CXT_TOTAL_SIZE;
|
2012-07-25 03:47:30 +00:00
|
|
|
else
|
|
|
|
ret = GEN7_CXT_TOTAL_SIZE(reg) * 64;
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
break;
|
2013-11-03 04:07:05 +00:00
|
|
|
case 8:
|
|
|
|
ret = GEN8_CXT_TOTAL_SIZE;
|
|
|
|
break;
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2015-10-05 12:26:36 +00:00
|
|
|
static void i915_gem_context_clean(struct intel_context *ctx)
|
|
|
|
{
|
|
|
|
struct i915_hw_ppgtt *ppgtt = ctx->ppgtt;
|
|
|
|
struct i915_vma *vma, *next;
|
|
|
|
|
2015-10-08 14:37:00 +00:00
|
|
|
if (!ppgtt)
|
2015-10-05 12:26:36 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
WARN_ON(!list_empty(&ppgtt->base.active_list));
|
|
|
|
|
|
|
|
list_for_each_entry_safe(vma, next, &ppgtt->base.inactive_list,
|
|
|
|
mm_list) {
|
|
|
|
if (WARN_ON(__i915_vma_unbind_no_wait(vma)))
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-04-30 10:30:33 +00:00
|
|
|
void i915_gem_context_free(struct kref *ctx_ref)
|
2012-06-04 21:42:43 +00:00
|
|
|
{
|
2015-05-05 08:17:29 +00:00
|
|
|
struct intel_context *ctx = container_of(ctx_ref, typeof(*ctx), ref);
|
2012-06-04 21:42:43 +00:00
|
|
|
|
2014-11-10 13:44:31 +00:00
|
|
|
trace_i915_context_free(ctx);
|
|
|
|
|
2014-08-06 13:04:53 +00:00
|
|
|
if (i915.enable_execlists)
|
2014-07-24 16:04:12 +00:00
|
|
|
intel_lr_context_free(ctx);
|
drm/i915: Add VM to context
Pretty straightforward so far except for the bit about the refcounting.
The PPGTT will potentially be shared amongst multiple contexts. Because
contexts themselves have a refcounted lifecycle, the easiest way to
manage this will be to refcount the PPGTT. To acheive this, we piggy
back off of the existing context refcount, and will increment and
decrement the PPGTT refcount with context creation, and destruction.
To put it more clearly, if context A, and context B both use PPGTT 0, we
can't free the PPGTT until both A, and B are destroyed.
Note that because the PPGTT is permanently pinned (for now), it really
just matters for the PPGTT destruction, as opposed to making space under
memory pressure.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:15 +00:00
|
|
|
|
2015-10-05 12:26:36 +00:00
|
|
|
/*
|
|
|
|
* This context is going away and we need to remove all VMAs still
|
|
|
|
* around. This is to handle imported shared objects for which
|
|
|
|
* destructor did not run when their handles were closed.
|
|
|
|
*/
|
|
|
|
i915_gem_context_clean(ctx);
|
|
|
|
|
2014-08-06 13:04:53 +00:00
|
|
|
i915_ppgtt_put(ctx->ppgtt);
|
|
|
|
|
drm/i915: Reorder ctx unref on ppgtt cleanup
The comment [which was mine] is wrong. The context object can never be
bound in a PPGTT because it is only capable of living in the Global GTT.
So, remove the comment, and reorder the unref. What's nice about the
latter is it keeps the context object alive past the PPGTT. This makes
the destroy ordering symmetric with the creation ordering.
Create:
1. Create context
2. Create PPGTT
Destroy:
1. Destroy PPGTT
2. Destroy context
As far as I know, this does not fix a bug. The code previously kept the
context data structure, only the object was gone. As the code was,
nothing tried to use the object after this point.
NOTE: If in the future we have cases where the PPGTT can/should outlive
the context (which doesn't occur today, but the code permits it), this
ordering does not matter. Even if this occurs, as it stands now, we do
not expect that to be the normal case, and having this order makes
debugging a bit easier if we're tracking object lifetimes for the
context vs ppgtt
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Resolve conflict with Oscar's execlist prep patches.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-01 18:17:47 +00:00
|
|
|
if (ctx->legacy_hw_ctx.rcs_state)
|
|
|
|
drm_gem_object_unreference(&ctx->legacy_hw_ctx.rcs_state->base);
|
drm/i915: Add VM to context
Pretty straightforward so far except for the bit about the refcounting.
The PPGTT will potentially be shared amongst multiple contexts. Because
contexts themselves have a refcounted lifecycle, the easiest way to
manage this will be to refcount the PPGTT. To acheive this, we piggy
back off of the existing context refcount, and will increment and
decrement the PPGTT refcount with context creation, and destruction.
To put it more clearly, if context A, and context B both use PPGTT 0, we
can't free the PPGTT until both A, and B are destroyed.
Note that because the PPGTT is permanently pinned (for now), it really
just matters for the PPGTT destruction, as opposed to making space under
memory pressure.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:15 +00:00
|
|
|
list_del(&ctx->link);
|
2012-06-04 21:42:43 +00:00
|
|
|
kfree(ctx);
|
|
|
|
}
|
|
|
|
|
drm/i915/bdw: A bit more advanced LR context alloc/free
Now that we have the ability to allocate our own context backing objects
and we have multiplexed one of them per engine inside the context structs,
we can finally allocate and free them correctly.
Regarding the context size, reading the register to calculate the sizes
can work, I think, however the docs are very clear about the actual
context sizes on GEN8, so just hardcode that and use it.
v2: Rebased on top of the Full PPGTT series. It is important to notice
that at this point we have one global default context per engine, all
of them using the aliasing PPGTT (as opposed to the single global
default context we have with legacy HW contexts).
v3:
- Go back to one single global default context, this time with multiple
backing objects inside.
- Use different context sizes for non-render engines, as suggested by
Damien (still hardcoded, since the information about the context size
registers in the BSpec is, well, *lacking*).
- Render ctx size is 20 (or 19) pages, but not 21 (caught by Damien).
- Move default context backing object creation to intel_init_ring (so
that we don't waste memory in rings that might not get initialized).
v4:
- Reuse the HW legacy context init/fini.
- Create a separate free function.
- Rename the functions with an intel_ preffix.
v5: Several rebases to account for the changes in the previous patches.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-24 16:04:14 +00:00
|
|
|
struct drm_i915_gem_object *
|
2014-07-03 15:27:58 +00:00
|
|
|
i915_gem_alloc_context_obj(struct drm_device *dev, size_t size)
|
|
|
|
{
|
|
|
|
struct drm_i915_gem_object *obj;
|
|
|
|
int ret;
|
|
|
|
|
2015-06-29 17:28:35 +00:00
|
|
|
obj = i915_gem_alloc_object(dev, size);
|
2014-07-03 15:27:58 +00:00
|
|
|
if (obj == NULL)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Try to make the context utilize L3 as well as LLC.
|
|
|
|
*
|
|
|
|
* On VLV we don't have L3 controls in the PTEs so we
|
|
|
|
* shouldn't touch the cache level, especially as that
|
|
|
|
* would make the object snooped which might have a
|
|
|
|
* negative performance impact.
|
|
|
|
*/
|
|
|
|
if (INTEL_INFO(dev)->gen >= 7 && !IS_VALLEYVIEW(dev)) {
|
|
|
|
ret = i915_gem_object_set_cache_level(obj, I915_CACHE_L3_LLC);
|
|
|
|
/* Failure shouldn't ever happen this early */
|
|
|
|
if (WARN_ON(ret)) {
|
|
|
|
drm_gem_object_unreference(&obj->base);
|
|
|
|
return ERR_PTR(ret);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return obj;
|
|
|
|
}
|
|
|
|
|
2014-05-22 13:13:37 +00:00
|
|
|
static struct intel_context *
|
2013-12-06 22:11:19 +00:00
|
|
|
__create_hw_context(struct drm_device *dev,
|
2014-08-06 13:04:45 +00:00
|
|
|
struct drm_i915_file_private *file_priv)
|
2012-06-04 21:42:43 +00:00
|
|
|
{
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
2014-05-22 13:13:37 +00:00
|
|
|
struct intel_context *ctx;
|
2013-02-28 01:04:10 +00:00
|
|
|
int ret;
|
2012-06-04 21:42:43 +00:00
|
|
|
|
2012-11-10 18:56:04 +00:00
|
|
|
ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
|
2012-06-29 17:30:39 +00:00
|
|
|
if (ctx == NULL)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
2012-06-04 21:42:43 +00:00
|
|
|
|
2013-04-30 10:30:33 +00:00
|
|
|
kref_init(&ctx->ref);
|
2014-04-09 08:07:36 +00:00
|
|
|
list_add_tail(&ctx->link, &dev_priv->context_list);
|
2015-05-05 08:17:29 +00:00
|
|
|
ctx->i915 = dev_priv;
|
2012-06-04 21:42:43 +00:00
|
|
|
|
2014-04-09 08:07:36 +00:00
|
|
|
if (dev_priv->hw_context_size) {
|
2014-07-03 15:27:58 +00:00
|
|
|
struct drm_i915_gem_object *obj =
|
|
|
|
i915_gem_alloc_context_obj(dev, dev_priv->hw_context_size);
|
|
|
|
if (IS_ERR(obj)) {
|
|
|
|
ret = PTR_ERR(obj);
|
2013-04-08 13:28:40 +00:00
|
|
|
goto err_out;
|
2014-04-09 08:07:36 +00:00
|
|
|
}
|
2014-07-03 15:27:59 +00:00
|
|
|
ctx->legacy_hw_ctx.rcs_state = obj;
|
2014-04-09 08:07:36 +00:00
|
|
|
}
|
2012-06-04 21:42:43 +00:00
|
|
|
|
|
|
|
/* Default context will never have a file_priv */
|
2014-04-09 08:07:36 +00:00
|
|
|
if (file_priv != NULL) {
|
|
|
|
ret = idr_alloc(&file_priv->context_idr, ctx,
|
drm/i915: Emphasize that ctx->id is merely a user handle
This is an Execlists preparatory patch, since they make context ID become an
overloaded term:
- In the software, it was used to distinguish which context userspace was
trying to use.
- In the BSpec, the term is used to describe the 20-bits long field the
hardware uses to it to discriminate the contexts that are submitted to
the ELSP and inform the driver about their current status (via Context
Switch Interrupts and Context Status Buffers).
Initially, I tried to make the different meanings converge, but it proved
impossible:
- The software ctx->id is per-filp, while the hardware one needs to be
globally unique.
- Also, we multiplex several backing states objects per intel_context,
and all of them need unique HW IDs.
- I tried adding a per-filp ID and then composing the HW context ID as:
ctx->id + file_priv->id + ring->id, but the fact that the hardware only
uses 20-bits means we have to artificially limit the number of filps or
contexts the userspace can create.
The ctx->user_handle renaming bits are done with this Cocci patch (plus
manual frobbing of the struct declaration):
@@
struct intel_context c;
@@
- (c).id
+ c.user_handle
@@
struct intel_context *c;
@@
- (c)->id
+ c->user_handle
Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and
change the type to unsigned 32 bits.
v2: s/handle/user_handle and change the type to uint32_t as suggested by
Chris Wilson.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 15:28:00 +00:00
|
|
|
DEFAULT_CONTEXT_HANDLE, 0, GFP_KERNEL);
|
2014-04-09 08:07:36 +00:00
|
|
|
if (ret < 0)
|
|
|
|
goto err_out;
|
|
|
|
} else
|
drm/i915: Emphasize that ctx->id is merely a user handle
This is an Execlists preparatory patch, since they make context ID become an
overloaded term:
- In the software, it was used to distinguish which context userspace was
trying to use.
- In the BSpec, the term is used to describe the 20-bits long field the
hardware uses to it to discriminate the contexts that are submitted to
the ELSP and inform the driver about their current status (via Context
Switch Interrupts and Context Status Buffers).
Initially, I tried to make the different meanings converge, but it proved
impossible:
- The software ctx->id is per-filp, while the hardware one needs to be
globally unique.
- Also, we multiplex several backing states objects per intel_context,
and all of them need unique HW IDs.
- I tried adding a per-filp ID and then composing the HW context ID as:
ctx->id + file_priv->id + ring->id, but the fact that the hardware only
uses 20-bits means we have to artificially limit the number of filps or
contexts the userspace can create.
The ctx->user_handle renaming bits are done with this Cocci patch (plus
manual frobbing of the struct declaration):
@@
struct intel_context c;
@@
- (c).id
+ c.user_handle
@@
struct intel_context *c;
@@
- (c)->id
+ c->user_handle
Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and
change the type to unsigned 32 bits.
v2: s/handle/user_handle and change the type to uint32_t as suggested by
Chris Wilson.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 15:28:00 +00:00
|
|
|
ret = DEFAULT_CONTEXT_HANDLE;
|
2013-04-30 10:30:33 +00:00
|
|
|
|
|
|
|
ctx->file_priv = file_priv;
|
drm/i915: Emphasize that ctx->id is merely a user handle
This is an Execlists preparatory patch, since they make context ID become an
overloaded term:
- In the software, it was used to distinguish which context userspace was
trying to use.
- In the BSpec, the term is used to describe the 20-bits long field the
hardware uses to it to discriminate the contexts that are submitted to
the ELSP and inform the driver about their current status (via Context
Switch Interrupts and Context Status Buffers).
Initially, I tried to make the different meanings converge, but it proved
impossible:
- The software ctx->id is per-filp, while the hardware one needs to be
globally unique.
- Also, we multiplex several backing states objects per intel_context,
and all of them need unique HW IDs.
- I tried adding a per-filp ID and then composing the HW context ID as:
ctx->id + file_priv->id + ring->id, but the fact that the hardware only
uses 20-bits means we have to artificially limit the number of filps or
contexts the userspace can create.
The ctx->user_handle renaming bits are done with this Cocci patch (plus
manual frobbing of the struct declaration):
@@
struct intel_context c;
@@
- (c).id
+ c.user_handle
@@
struct intel_context *c;
@@
- (c)->id
+ c->user_handle
Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and
change the type to unsigned 32 bits.
v2: s/handle/user_handle and change the type to uint32_t as suggested by
Chris Wilson.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 15:28:00 +00:00
|
|
|
ctx->user_handle = ret;
|
drm/i915: Do remaps for all contexts
On both Ivybridge and Haswell, row remapping information is saved and
restored with context. This means, we never actually properly supported
the l3 remapping because our sysfs interface is asynchronous (and not
tied to any context), and the known faulty HW would be reused by the
next context to run.
Not that due to the asynchronous nature of the sysfs entry, there is no
point modifying the registers for the existing context. Instead we set a
flag for all contexts to load the correct remapping information on the
next run. Interested clients can use debugfs to determine whether or not
the row has been remapped.
One could propose at this point that we just do the remapping in the
kernel. I guess since we have to maintain the sysfs interface anyway,
I'm not sure how useful it is, and I do like keeping the policy in
userspace; (it wasn't my original decision to make the
interface the way it is, so I'm not attached).
v2: Force a context switch when we have a remap on the next switch.
(Ville)
Don't let userspace use the interface with disabled contexts.
v3: Don't force a context switch, just let it nop
Improper context slice remap initialization, 1<<1 instead of 1<<i, but I
rewrote it to avoid a second round of confusion.
Error print moved to error path (All Ville)
Added a comment on why the slice remap initialization happens.
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19 02:03:18 +00:00
|
|
|
/* NB: Mark all slices as needing a remap so that when the context first
|
|
|
|
* loads it will restore whatever remap state already exists. If there
|
|
|
|
* is no remap info, it will be a NOP. */
|
|
|
|
ctx->remap_slice = (1 << NUM_L3_SLICES(dev)) - 1;
|
2012-06-04 21:42:43 +00:00
|
|
|
|
2014-12-24 16:13:39 +00:00
|
|
|
ctx->hang_stats.ban_period_seconds = DRM_I915_CTX_BAN_PERIOD;
|
|
|
|
|
2012-06-29 17:30:39 +00:00
|
|
|
return ctx;
|
2012-06-04 21:42:43 +00:00
|
|
|
|
|
|
|
err_out:
|
2013-04-30 10:30:33 +00:00
|
|
|
i915_gem_context_unreference(ctx);
|
2012-06-29 17:30:39 +00:00
|
|
|
return ERR_PTR(ret);
|
2012-06-04 21:42:43 +00:00
|
|
|
}
|
|
|
|
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
/**
|
|
|
|
* The default context needs to exist per ring that uses contexts. It stores the
|
|
|
|
* context state of the GPU for applications that don't utilize HW contexts, as
|
|
|
|
* well as an idle case.
|
|
|
|
*/
|
2014-05-22 13:13:37 +00:00
|
|
|
static struct intel_context *
|
2013-12-06 22:11:19 +00:00
|
|
|
i915_gem_create_context(struct drm_device *dev,
|
2014-08-06 13:04:54 +00:00
|
|
|
struct drm_i915_file_private *file_priv)
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
{
|
2014-01-23 19:40:02 +00:00
|
|
|
const bool is_global_default_ctx = file_priv == NULL;
|
2014-05-22 13:13:37 +00:00
|
|
|
struct intel_context *ctx;
|
2013-12-06 22:11:18 +00:00
|
|
|
int ret = 0;
|
2012-06-04 21:42:43 +00:00
|
|
|
|
2013-12-06 22:10:59 +00:00
|
|
|
BUG_ON(!mutex_is_locked(&dev->struct_mutex));
|
2012-06-04 21:42:43 +00:00
|
|
|
|
2013-12-06 22:11:19 +00:00
|
|
|
ctx = __create_hw_context(dev, file_priv);
|
2012-06-29 17:30:39 +00:00
|
|
|
if (IS_ERR(ctx))
|
2013-12-06 22:11:05 +00:00
|
|
|
return ctx;
|
2012-06-04 21:42:43 +00:00
|
|
|
|
2014-07-03 15:27:59 +00:00
|
|
|
if (is_global_default_ctx && ctx->legacy_hw_ctx.rcs_state) {
|
2014-01-23 19:40:02 +00:00
|
|
|
/* We may need to do things with the shrinker which
|
|
|
|
* require us to immediately switch back to the default
|
|
|
|
* context. This can cause a problem as pinning the
|
|
|
|
* default context also requires GTT space which may not
|
|
|
|
* be available. To avoid this we always pin the default
|
|
|
|
* context.
|
|
|
|
*/
|
2014-07-03 15:27:59 +00:00
|
|
|
ret = i915_gem_obj_ggtt_pin(ctx->legacy_hw_ctx.rcs_state,
|
2014-02-14 13:01:11 +00:00
|
|
|
get_context_alignment(dev), 0);
|
2014-01-23 19:40:02 +00:00
|
|
|
if (ret) {
|
|
|
|
DRM_DEBUG_DRIVER("Couldn't pin %d\n", ret);
|
|
|
|
goto err_destroy;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-08-06 13:04:54 +00:00
|
|
|
if (USES_FULL_PPGTT(dev)) {
|
2014-08-06 13:04:47 +00:00
|
|
|
struct i915_hw_ppgtt *ppgtt = i915_ppgtt_create(dev, file_priv);
|
2013-12-06 22:11:18 +00:00
|
|
|
|
|
|
|
if (IS_ERR_OR_NULL(ppgtt)) {
|
2013-12-06 22:11:19 +00:00
|
|
|
DRM_DEBUG_DRIVER("PPGTT setup failed (%ld)\n",
|
|
|
|
PTR_ERR(ppgtt));
|
2013-12-06 22:11:18 +00:00
|
|
|
ret = PTR_ERR(ppgtt);
|
2014-01-23 19:40:02 +00:00
|
|
|
goto err_unpin;
|
2014-08-06 13:04:53 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
ctx->ppgtt = ppgtt;
|
|
|
|
}
|
2013-12-06 22:11:18 +00:00
|
|
|
|
2014-11-10 13:44:31 +00:00
|
|
|
trace_i915_context_create(ctx);
|
|
|
|
|
2013-12-06 22:11:05 +00:00
|
|
|
return ctx;
|
2012-07-15 11:34:24 +00:00
|
|
|
|
2014-01-23 19:40:02 +00:00
|
|
|
err_unpin:
|
2014-07-03 15:27:59 +00:00
|
|
|
if (is_global_default_ctx && ctx->legacy_hw_ctx.rcs_state)
|
|
|
|
i915_gem_object_ggtt_unpin(ctx->legacy_hw_ctx.rcs_state);
|
2012-07-15 11:34:24 +00:00
|
|
|
err_destroy:
|
2015-08-08 13:02:36 +00:00
|
|
|
idr_remove(&file_priv->context_idr, ctx->user_handle);
|
2013-04-30 10:30:33 +00:00
|
|
|
i915_gem_context_unreference(ctx);
|
2013-12-06 22:11:05 +00:00
|
|
|
return ERR_PTR(ret);
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
}
|
|
|
|
|
2013-12-06 22:11:03 +00:00
|
|
|
void i915_gem_context_reset(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
int i;
|
|
|
|
|
2015-02-16 16:12:53 +00:00
|
|
|
if (i915.enable_execlists) {
|
|
|
|
struct intel_context *ctx;
|
|
|
|
|
|
|
|
list_for_each_entry(ctx, &dev_priv->context_list, link) {
|
|
|
|
intel_lr_context_reset(dev, ctx);
|
|
|
|
}
|
|
|
|
|
2014-08-20 15:29:24 +00:00
|
|
|
return;
|
2015-02-16 16:12:53 +00:00
|
|
|
}
|
2014-08-20 15:29:24 +00:00
|
|
|
|
2013-12-06 22:11:03 +00:00
|
|
|
for (i = 0; i < I915_NUM_RINGS; i++) {
|
2014-05-22 13:13:33 +00:00
|
|
|
struct intel_engine_cs *ring = &dev_priv->ring[i];
|
2014-07-03 15:27:59 +00:00
|
|
|
struct intel_context *lctx = ring->last_context;
|
2013-12-06 22:11:03 +00:00
|
|
|
|
2014-08-15 17:51:35 +00:00
|
|
|
if (lctx) {
|
|
|
|
if (lctx->legacy_hw_ctx.rcs_state && i == RCS)
|
|
|
|
i915_gem_object_ggtt_unpin(lctx->legacy_hw_ctx.rcs_state);
|
2013-12-06 22:11:03 +00:00
|
|
|
|
2014-08-15 17:51:35 +00:00
|
|
|
i915_gem_context_unreference(lctx);
|
|
|
|
ring->last_context = NULL;
|
2013-12-06 22:11:03 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2013-11-06 15:56:29 +00:00
|
|
|
int i915_gem_context_init(struct drm_device *dev)
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
{
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
2014-05-22 13:13:37 +00:00
|
|
|
struct intel_context *ctx;
|
2013-12-06 22:11:05 +00:00
|
|
|
int i;
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
|
drm/i915: Split context enabling from init
We **need** to do this for exactly 1 reason, because we want to embed a
PPGTT into the context, but we don't want to special case the default
context.
To achieve that, we must be able to initialize contexts after the GTT is
setup (so we can allocate and pin the default context's BO), but before
the PPGTT and rings are initialized. This is because, currently, context
initialization requires ring usage. We don't have rings until after the
GTT is setup. If we split the enabling part of context initialization,
the part requiring the ringbuffer, we can untangle this, and then later
embed the PPGTT
Incidentally this allows us to also adhere to the original design of
context init/fini in future patches: they were only ever meant to be
called at driver load and unload.
v2: Move hw_contexts_disabled test in i915_gem_context_enable() (Chris)
v3: BUG_ON after checking for disabled contexts. Or else it blows up pre
gen6 (Ben)
v4: Forward port
Modified enable for each ring, since that patch is earlier in the series
Dropped ring arg from create_default_context so it can be used by others
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:04 +00:00
|
|
|
/* Init should only be called once per module load. Eventually the
|
|
|
|
* restriction on the context_disabled check can be loosened. */
|
|
|
|
if (WARN_ON(dev_priv->ring[RCS].default_context))
|
2013-11-06 15:56:29 +00:00
|
|
|
return 0;
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
|
2015-08-28 07:41:16 +00:00
|
|
|
if (intel_vgpu_active(dev) && HAS_LOGICAL_RING_CONTEXTS(dev)) {
|
|
|
|
if (!i915.enable_execlists) {
|
|
|
|
DRM_INFO("Only EXECLIST mode is supported in vgpu.\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-07-24 16:04:12 +00:00
|
|
|
if (i915.enable_execlists) {
|
|
|
|
/* NB: intentionally left blank. We will allocate our own
|
|
|
|
* backing objects as we need them, thank you very much */
|
|
|
|
dev_priv->hw_context_size = 0;
|
|
|
|
} else if (HAS_HW_CONTEXTS(dev)) {
|
2014-04-09 08:07:36 +00:00
|
|
|
dev_priv->hw_context_size = round_up(get_context_size(dev), 4096);
|
|
|
|
if (dev_priv->hw_context_size > (1<<20)) {
|
|
|
|
DRM_DEBUG_DRIVER("Disabling HW Contexts; invalid size %d\n",
|
|
|
|
dev_priv->hw_context_size);
|
|
|
|
dev_priv->hw_context_size = 0;
|
|
|
|
}
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
}
|
|
|
|
|
2014-08-06 13:04:54 +00:00
|
|
|
ctx = i915_gem_create_context(dev, NULL);
|
2014-04-09 08:07:36 +00:00
|
|
|
if (IS_ERR(ctx)) {
|
|
|
|
DRM_ERROR("Failed to create default global context (error %ld)\n",
|
|
|
|
PTR_ERR(ctx));
|
|
|
|
return PTR_ERR(ctx);
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
}
|
|
|
|
|
2014-07-24 16:04:12 +00:00
|
|
|
for (i = 0; i < I915_NUM_RINGS; i++) {
|
|
|
|
struct intel_engine_cs *ring = &dev_priv->ring[i];
|
|
|
|
|
|
|
|
/* NB: RCS will hold a ref for all rings */
|
|
|
|
ring->default_context = ctx;
|
|
|
|
}
|
2013-12-06 22:11:01 +00:00
|
|
|
|
2014-07-24 16:04:12 +00:00
|
|
|
DRM_DEBUG_DRIVER("%s context support initialized\n",
|
|
|
|
i915.enable_execlists ? "LR" :
|
|
|
|
dev_priv->hw_context_size ? "HW" : "fake");
|
2013-11-06 15:56:29 +00:00
|
|
|
return 0;
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void i915_gem_context_fini(struct drm_device *dev)
|
|
|
|
{
|
|
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
2014-05-22 13:13:37 +00:00
|
|
|
struct intel_context *dctx = dev_priv->ring[RCS].default_context;
|
2013-12-06 22:11:01 +00:00
|
|
|
int i;
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
|
2014-07-03 15:27:59 +00:00
|
|
|
if (dctx->legacy_hw_ctx.rcs_state) {
|
2014-04-09 08:07:36 +00:00
|
|
|
/* The only known way to stop the gpu from accessing the hw context is
|
|
|
|
* to reset it. Do this as the very last operation to avoid confusing
|
|
|
|
* other code, leading to spurious errors. */
|
|
|
|
intel_gpu_reset(dev);
|
|
|
|
|
|
|
|
/* When default context is created and switched to, base object refcount
|
|
|
|
* will be 2 (+1 from object creation and +1 from do_switch()).
|
|
|
|
* i915_gem_context_fini() will be called after gpu_idle() has switched
|
|
|
|
* to default context. So we need to unreference the base object once
|
|
|
|
* to offset the do_switch part, so that i915_gem_context_unreference()
|
|
|
|
* can then free the base object correctly. */
|
|
|
|
WARN_ON(!dev_priv->ring[RCS].last_context);
|
|
|
|
if (dev_priv->ring[RCS].last_context == dctx) {
|
|
|
|
/* Fake switch to NULL context */
|
2014-07-03 15:27:59 +00:00
|
|
|
WARN_ON(dctx->legacy_hw_ctx.rcs_state->active);
|
|
|
|
i915_gem_object_ggtt_unpin(dctx->legacy_hw_ctx.rcs_state);
|
2014-04-09 08:07:36 +00:00
|
|
|
i915_gem_context_unreference(dctx);
|
|
|
|
dev_priv->ring[RCS].last_context = NULL;
|
|
|
|
}
|
2014-05-16 17:59:00 +00:00
|
|
|
|
2014-07-03 15:27:59 +00:00
|
|
|
i915_gem_object_ggtt_unpin(dctx->legacy_hw_ctx.rcs_state);
|
2013-12-06 22:11:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < I915_NUM_RINGS; i++) {
|
2014-05-22 13:13:33 +00:00
|
|
|
struct intel_engine_cs *ring = &dev_priv->ring[i];
|
2013-12-06 22:11:01 +00:00
|
|
|
|
|
|
|
if (ring->last_context)
|
|
|
|
i915_gem_context_unreference(ring->last_context);
|
|
|
|
|
|
|
|
ring->default_context = NULL;
|
2013-12-06 22:11:02 +00:00
|
|
|
ring->last_context = NULL;
|
2013-10-14 17:01:37 +00:00
|
|
|
}
|
|
|
|
|
2013-04-30 10:30:33 +00:00
|
|
|
i915_gem_context_unreference(dctx);
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
}
|
|
|
|
|
2015-05-29 16:43:40 +00:00
|
|
|
int i915_gem_context_enable(struct drm_i915_gem_request *req)
|
drm/i915: Split context enabling from init
We **need** to do this for exactly 1 reason, because we want to embed a
PPGTT into the context, but we don't want to special case the default
context.
To achieve that, we must be able to initialize contexts after the GTT is
setup (so we can allocate and pin the default context's BO), but before
the PPGTT and rings are initialized. This is because, currently, context
initialization requires ring usage. We don't have rings until after the
GTT is setup. If we split the enabling part of context initialization,
the part requiring the ringbuffer, we can untangle this, and then later
embed the PPGTT
Incidentally this allows us to also adhere to the original design of
context init/fini in future patches: they were only ever meant to be
called at driver load and unload.
v2: Move hw_contexts_disabled test in i915_gem_context_enable() (Chris)
v3: BUG_ON after checking for disabled contexts. Or else it blows up pre
gen6 (Ben)
v4: Forward port
Modified enable for each ring, since that patch is earlier in the series
Dropped ring arg from create_default_context so it can be used by others
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:04 +00:00
|
|
|
{
|
2015-05-29 16:43:40 +00:00
|
|
|
struct intel_engine_cs *ring = req->ring;
|
2015-05-29 16:43:37 +00:00
|
|
|
int ret;
|
2013-12-06 22:11:18 +00:00
|
|
|
|
2014-12-02 12:50:48 +00:00
|
|
|
if (i915.enable_execlists) {
|
2015-05-29 16:43:37 +00:00
|
|
|
if (ring->init_context == NULL)
|
|
|
|
return 0;
|
2014-08-20 15:29:24 +00:00
|
|
|
|
2015-05-29 16:43:44 +00:00
|
|
|
ret = ring->init_context(req);
|
2014-12-02 12:50:48 +00:00
|
|
|
} else
|
2015-05-29 16:43:41 +00:00
|
|
|
ret = i915_switch_context(req);
|
2015-05-29 16:43:37 +00:00
|
|
|
|
|
|
|
if (ret) {
|
|
|
|
DRM_ERROR("ring init context: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
drm/i915: Split context enabling from init
We **need** to do this for exactly 1 reason, because we want to embed a
PPGTT into the context, but we don't want to special case the default
context.
To achieve that, we must be able to initialize contexts after the GTT is
setup (so we can allocate and pin the default context's BO), but before
the PPGTT and rings are initialized. This is because, currently, context
initialization requires ring usage. We don't have rings until after the
GTT is setup. If we split the enabling part of context initialization,
the part requiring the ringbuffer, we can untangle this, and then later
embed the PPGTT
Incidentally this allows us to also adhere to the original design of
context init/fini in future patches: they were only ever meant to be
called at driver load and unload.
v2: Move hw_contexts_disabled test in i915_gem_context_enable() (Chris)
v3: BUG_ON after checking for disabled contexts. Or else it blows up pre
gen6 (Ben)
v4: Forward port
Modified enable for each ring, since that patch is earlier in the series
Dropped ring arg from create_default_context so it can be used by others
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:11:04 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-06-04 21:42:43 +00:00
|
|
|
static int context_idr_cleanup(int id, void *p, void *data)
|
|
|
|
{
|
2014-05-22 13:13:37 +00:00
|
|
|
struct intel_context *ctx = p;
|
2012-06-04 21:42:43 +00:00
|
|
|
|
2013-04-30 10:30:33 +00:00
|
|
|
i915_gem_context_unreference(ctx);
|
2012-06-04 21:42:43 +00:00
|
|
|
return 0;
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
}
|
|
|
|
|
2013-12-06 22:10:58 +00:00
|
|
|
int i915_gem_context_open(struct drm_device *dev, struct drm_file *file)
|
|
|
|
{
|
|
|
|
struct drm_i915_file_private *file_priv = file->driver_priv;
|
2014-05-22 13:13:38 +00:00
|
|
|
struct intel_context *ctx;
|
2013-12-06 22:10:58 +00:00
|
|
|
|
|
|
|
idr_init(&file_priv->context_idr);
|
|
|
|
|
2013-12-06 22:11:19 +00:00
|
|
|
mutex_lock(&dev->struct_mutex);
|
2014-08-06 13:04:54 +00:00
|
|
|
ctx = i915_gem_create_context(dev, file_priv);
|
2013-12-06 22:11:19 +00:00
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
|
2014-05-22 13:13:38 +00:00
|
|
|
if (IS_ERR(ctx)) {
|
2013-12-06 22:11:19 +00:00
|
|
|
idr_destroy(&file_priv->context_idr);
|
2014-05-22 13:13:38 +00:00
|
|
|
return PTR_ERR(ctx);
|
2013-12-06 22:11:19 +00:00
|
|
|
}
|
|
|
|
|
2013-12-06 22:10:58 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
void i915_gem_context_close(struct drm_device *dev, struct drm_file *file)
|
|
|
|
{
|
2012-06-04 21:42:43 +00:00
|
|
|
struct drm_i915_file_private *file_priv = file->driver_priv;
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
|
2012-06-19 18:27:39 +00:00
|
|
|
idr_for_each(&file_priv->context_idr, context_idr_cleanup, NULL);
|
2012-06-04 21:42:43 +00:00
|
|
|
idr_destroy(&file_priv->context_idr);
|
|
|
|
}
|
|
|
|
|
2014-05-22 13:13:37 +00:00
|
|
|
struct intel_context *
|
2012-06-04 21:42:43 +00:00
|
|
|
i915_gem_context_get(struct drm_i915_file_private *file_priv, u32 id)
|
|
|
|
{
|
2014-05-22 13:13:37 +00:00
|
|
|
struct intel_context *ctx;
|
2014-01-03 05:50:27 +00:00
|
|
|
|
2014-05-22 13:13:37 +00:00
|
|
|
ctx = (struct intel_context *)idr_find(&file_priv->context_idr, id);
|
2014-01-03 05:50:27 +00:00
|
|
|
if (!ctx)
|
|
|
|
return ERR_PTR(-ENOENT);
|
|
|
|
|
|
|
|
return ctx;
|
drm/i915: preliminary context support
Very basic code for context setup/destruction in the driver.
Adds the file i915_gem_context.c This file implements HW context
support. On gen5+ a HW context consists of an opaque GPU object which is
referenced at times of context saves and restores. With RC6 enabled,
the context is also referenced as the GPU enters and exists from RC6
(GPU has it's own internal power context, except on gen5). Though
something like a context does exist for the media ring, the code only
supports contexts for the render ring.
In software, there is a distinction between contexts created by the
user, and the default HW context. The default HW context is used by GPU
clients that do not request setup of their own hardware context. The
default context's state is never restored to help prevent programming
errors. This would happen if a client ran and piggy-backed off another
clients GPU state. The default context only exists to give the GPU some
offset to load as the current to invoke a save of the context we
actually care about. In fact, the code could likely be constructed,
albeit in a more complicated fashion, to never use the default context,
though that limits the driver's ability to swap out, and/or destroy
other contexts.
All other contexts are created as a request by the GPU client. These
contexts store GPU state, and thus allow GPU clients to not re-emit
state (and potentially query certain state) at any time. The kernel
driver makes certain that the appropriate commands are inserted.
There are 4 entry points into the contexts, init, fini, open, close.
The names are self-explanatory except that init can be called during
reset, and also during pm thaw/resume. As we expect our context to be
preserved across these events, we do not reinitialize in this case.
As Adam Jackson pointed out, The cutoff of 1MB where a HW context is
considered too big is arbitrary. The reason for this is even though
context sizes are increasing with every generation, they have yet to
eclipse even 32k. If we somehow read back way more than that, it
probably means BIOS has done something strange, or we're running on a
platform that wasn't designed for this.
v2: rename load/unload to init/fini (daniel)
remove ILK support for get_size() (indirectly daniel)
add HAS_HW_CONTEXTS macro to clarify supported platforms (daniel)
added comments (Ben)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
2012-06-04 21:42:42 +00:00
|
|
|
}
|
2012-06-04 21:42:46 +00:00
|
|
|
|
|
|
|
static inline int
|
2015-05-29 16:43:52 +00:00
|
|
|
mi_set_context(struct drm_i915_gem_request *req, u32 hw_flags)
|
2012-06-04 21:42:46 +00:00
|
|
|
{
|
2015-05-29 16:43:52 +00:00
|
|
|
struct intel_engine_cs *ring = req->ring;
|
2014-08-18 17:35:28 +00:00
|
|
|
u32 flags = hw_flags | MI_MM_SPACE_GTT;
|
drm/i915: Disable PSMI sleep messages on all rings around context switches
There exists a current workaround to prevent a hang on context switch
should the ring go to sleep in the middle of the restore,
WaProgramMiArbOnOffAroundMiSetContext (applicable to all gen7+). In
spite of disabling arbitration (which prevents the ring from powering
down during the critical section) we were still hitting hangs that had
the hallmarks of the known erratum. That is we are still seeing hangs
"on the last instruction in the context restore". By comparing -nightly
(broken) with requests (working), we were able to deduce that it was the
semaphore LRI cross-talk that reproduced the original failure. The key
was that requests implemented deferred semaphore signalling, and
disabling that, i.e. emitting the semaphore signal to every other ring
after every batch restored the frequent hang. Explicitly disabling PSMI
sleep on the RCS ring was insufficient, all the rings had to be awake to
prevent the hangs. Fortunately, we can reduce the wakelock to the
MI_SET_CONTEXT operation itself, and so should be able to limit the extra
power implications.
Since the MI_ARB_ON_OFF workaround is listed for all gen7 and above
products, we should apply this extra hammer for all of the same
platforms despite so far that we have only been able to reproduce the
hang on certain ivb and hsw models. The last question is whether we want
to always use the extra hammer or only when we know semaphores are in
operation. At the moment, we only use LRI on non-RCS rings for
semaphores, but that may change in the future with the possibility of
reintroducing this bug under subtle conditions.
v2: Make it explicit that the PSMI LRI are an extension to the original
workaround for the other rings.
v3: Bikeshedding variable names and whitespacing
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80660
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83677
Cc: Simon Farnsworth <simon@farnz.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Peter Frühberger <fritsch@xbmc.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-16 10:02:27 +00:00
|
|
|
const int num_rings =
|
|
|
|
/* Use an extended w/a on ivb+ if signalling from other rings */
|
|
|
|
i915_semaphore_is_enabled(ring->dev) ?
|
|
|
|
hweight32(INTEL_INFO(ring->dev)->ring_mask) - 1 :
|
|
|
|
0;
|
|
|
|
int len, i, ret;
|
2012-06-04 21:42:46 +00:00
|
|
|
|
2012-06-04 21:42:50 +00:00
|
|
|
/* w/a: If Flush TLB Invalidation Mode is enabled, driver must do a TLB
|
|
|
|
* invalidation prior to MI_SET_CONTEXT. On GEN6 we don't set the value
|
|
|
|
* explicitly, so we rely on the value at ring init, stored in
|
|
|
|
* itlb_before_ctx_switch.
|
|
|
|
*/
|
2014-04-03 05:30:23 +00:00
|
|
|
if (IS_GEN6(ring->dev)) {
|
2015-05-29 16:43:57 +00:00
|
|
|
ret = ring->flush(req, I915_GEM_GPU_DOMAINS, 0);
|
2012-06-04 21:42:50 +00:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-08-18 17:35:28 +00:00
|
|
|
/* These flags are for resource streamer on HSW+ */
|
2015-06-16 10:39:41 +00:00
|
|
|
if (IS_HASWELL(ring->dev) || INTEL_INFO(ring->dev)->gen >= 8)
|
|
|
|
flags |= (HSW_MI_RS_SAVE_STATE_EN | HSW_MI_RS_RESTORE_STATE_EN);
|
|
|
|
else if (INTEL_INFO(ring->dev)->gen < 8)
|
2014-08-18 17:35:28 +00:00
|
|
|
flags |= (MI_SAVE_EXT_STATE_EN | MI_RESTORE_EXT_STATE_EN);
|
|
|
|
|
drm/i915: Disable PSMI sleep messages on all rings around context switches
There exists a current workaround to prevent a hang on context switch
should the ring go to sleep in the middle of the restore,
WaProgramMiArbOnOffAroundMiSetContext (applicable to all gen7+). In
spite of disabling arbitration (which prevents the ring from powering
down during the critical section) we were still hitting hangs that had
the hallmarks of the known erratum. That is we are still seeing hangs
"on the last instruction in the context restore". By comparing -nightly
(broken) with requests (working), we were able to deduce that it was the
semaphore LRI cross-talk that reproduced the original failure. The key
was that requests implemented deferred semaphore signalling, and
disabling that, i.e. emitting the semaphore signal to every other ring
after every batch restored the frequent hang. Explicitly disabling PSMI
sleep on the RCS ring was insufficient, all the rings had to be awake to
prevent the hangs. Fortunately, we can reduce the wakelock to the
MI_SET_CONTEXT operation itself, and so should be able to limit the extra
power implications.
Since the MI_ARB_ON_OFF workaround is listed for all gen7 and above
products, we should apply this extra hammer for all of the same
platforms despite so far that we have only been able to reproduce the
hang on certain ivb and hsw models. The last question is whether we want
to always use the extra hammer or only when we know semaphores are in
operation. At the moment, we only use LRI on non-RCS rings for
semaphores, but that may change in the future with the possibility of
reintroducing this bug under subtle conditions.
v2: Make it explicit that the PSMI LRI are an extension to the original
workaround for the other rings.
v3: Bikeshedding variable names and whitespacing
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80660
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83677
Cc: Simon Farnsworth <simon@farnz.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Peter Frühberger <fritsch@xbmc.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-16 10:02:27 +00:00
|
|
|
|
|
|
|
len = 4;
|
|
|
|
if (INTEL_INFO(ring->dev)->gen >= 7)
|
|
|
|
len += 2 + (num_rings ? 4*num_rings + 2 : 0);
|
|
|
|
|
2015-05-29 16:44:07 +00:00
|
|
|
ret = intel_ring_begin(req, len);
|
2012-06-04 21:42:46 +00:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2014-04-28 11:31:09 +00:00
|
|
|
/* WaProgramMiArbOnOffAroundMiSetContext:ivb,vlv,hsw,bdw,chv */
|
drm/i915: Disable PSMI sleep messages on all rings around context switches
There exists a current workaround to prevent a hang on context switch
should the ring go to sleep in the middle of the restore,
WaProgramMiArbOnOffAroundMiSetContext (applicable to all gen7+). In
spite of disabling arbitration (which prevents the ring from powering
down during the critical section) we were still hitting hangs that had
the hallmarks of the known erratum. That is we are still seeing hangs
"on the last instruction in the context restore". By comparing -nightly
(broken) with requests (working), we were able to deduce that it was the
semaphore LRI cross-talk that reproduced the original failure. The key
was that requests implemented deferred semaphore signalling, and
disabling that, i.e. emitting the semaphore signal to every other ring
after every batch restored the frequent hang. Explicitly disabling PSMI
sleep on the RCS ring was insufficient, all the rings had to be awake to
prevent the hangs. Fortunately, we can reduce the wakelock to the
MI_SET_CONTEXT operation itself, and so should be able to limit the extra
power implications.
Since the MI_ARB_ON_OFF workaround is listed for all gen7 and above
products, we should apply this extra hammer for all of the same
platforms despite so far that we have only been able to reproduce the
hang on certain ivb and hsw models. The last question is whether we want
to always use the extra hammer or only when we know semaphores are in
operation. At the moment, we only use LRI on non-RCS rings for
semaphores, but that may change in the future with the possibility of
reintroducing this bug under subtle conditions.
v2: Make it explicit that the PSMI LRI are an extension to the original
workaround for the other rings.
v3: Bikeshedding variable names and whitespacing
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80660
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83677
Cc: Simon Farnsworth <simon@farnz.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Peter Frühberger <fritsch@xbmc.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-16 10:02:27 +00:00
|
|
|
if (INTEL_INFO(ring->dev)->gen >= 7) {
|
2012-06-04 21:42:48 +00:00
|
|
|
intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_DISABLE);
|
drm/i915: Disable PSMI sleep messages on all rings around context switches
There exists a current workaround to prevent a hang on context switch
should the ring go to sleep in the middle of the restore,
WaProgramMiArbOnOffAroundMiSetContext (applicable to all gen7+). In
spite of disabling arbitration (which prevents the ring from powering
down during the critical section) we were still hitting hangs that had
the hallmarks of the known erratum. That is we are still seeing hangs
"on the last instruction in the context restore". By comparing -nightly
(broken) with requests (working), we were able to deduce that it was the
semaphore LRI cross-talk that reproduced the original failure. The key
was that requests implemented deferred semaphore signalling, and
disabling that, i.e. emitting the semaphore signal to every other ring
after every batch restored the frequent hang. Explicitly disabling PSMI
sleep on the RCS ring was insufficient, all the rings had to be awake to
prevent the hangs. Fortunately, we can reduce the wakelock to the
MI_SET_CONTEXT operation itself, and so should be able to limit the extra
power implications.
Since the MI_ARB_ON_OFF workaround is listed for all gen7 and above
products, we should apply this extra hammer for all of the same
platforms despite so far that we have only been able to reproduce the
hang on certain ivb and hsw models. The last question is whether we want
to always use the extra hammer or only when we know semaphores are in
operation. At the moment, we only use LRI on non-RCS rings for
semaphores, but that may change in the future with the possibility of
reintroducing this bug under subtle conditions.
v2: Make it explicit that the PSMI LRI are an extension to the original
workaround for the other rings.
v3: Bikeshedding variable names and whitespacing
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80660
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83677
Cc: Simon Farnsworth <simon@farnz.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Peter Frühberger <fritsch@xbmc.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-16 10:02:27 +00:00
|
|
|
if (num_rings) {
|
|
|
|
struct intel_engine_cs *signaller;
|
|
|
|
|
|
|
|
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(num_rings));
|
|
|
|
for_each_ring(signaller, to_i915(ring->dev), i) {
|
|
|
|
if (signaller == ring)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
intel_ring_emit(ring, RING_PSMI_CTL(signaller->mmio_base));
|
|
|
|
intel_ring_emit(ring, _MASKED_BIT_ENABLE(GEN6_PSMI_SLEEP_MSG_DISABLE));
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
2012-06-04 21:42:48 +00:00
|
|
|
|
2012-06-04 21:42:46 +00:00
|
|
|
intel_ring_emit(ring, MI_NOOP);
|
|
|
|
intel_ring_emit(ring, MI_SET_CONTEXT);
|
2015-05-29 16:43:52 +00:00
|
|
|
intel_ring_emit(ring, i915_gem_obj_ggtt_offset(req->ctx->legacy_hw_ctx.rcs_state) |
|
2014-08-18 17:35:28 +00:00
|
|
|
flags);
|
2014-01-22 19:32:43 +00:00
|
|
|
/*
|
|
|
|
* w/a: MI_SET_CONTEXT must always be followed by MI_NOOP
|
|
|
|
* WaMiSetContext_Hang:snb,ivb,vlv
|
|
|
|
*/
|
2012-06-04 21:42:46 +00:00
|
|
|
intel_ring_emit(ring, MI_NOOP);
|
|
|
|
|
drm/i915: Disable PSMI sleep messages on all rings around context switches
There exists a current workaround to prevent a hang on context switch
should the ring go to sleep in the middle of the restore,
WaProgramMiArbOnOffAroundMiSetContext (applicable to all gen7+). In
spite of disabling arbitration (which prevents the ring from powering
down during the critical section) we were still hitting hangs that had
the hallmarks of the known erratum. That is we are still seeing hangs
"on the last instruction in the context restore". By comparing -nightly
(broken) with requests (working), we were able to deduce that it was the
semaphore LRI cross-talk that reproduced the original failure. The key
was that requests implemented deferred semaphore signalling, and
disabling that, i.e. emitting the semaphore signal to every other ring
after every batch restored the frequent hang. Explicitly disabling PSMI
sleep on the RCS ring was insufficient, all the rings had to be awake to
prevent the hangs. Fortunately, we can reduce the wakelock to the
MI_SET_CONTEXT operation itself, and so should be able to limit the extra
power implications.
Since the MI_ARB_ON_OFF workaround is listed for all gen7 and above
products, we should apply this extra hammer for all of the same
platforms despite so far that we have only been able to reproduce the
hang on certain ivb and hsw models. The last question is whether we want
to always use the extra hammer or only when we know semaphores are in
operation. At the moment, we only use LRI on non-RCS rings for
semaphores, but that may change in the future with the possibility of
reintroducing this bug under subtle conditions.
v2: Make it explicit that the PSMI LRI are an extension to the original
workaround for the other rings.
v3: Bikeshedding variable names and whitespacing
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80660
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83677
Cc: Simon Farnsworth <simon@farnz.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Peter Frühberger <fritsch@xbmc.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-16 10:02:27 +00:00
|
|
|
if (INTEL_INFO(ring->dev)->gen >= 7) {
|
|
|
|
if (num_rings) {
|
|
|
|
struct intel_engine_cs *signaller;
|
|
|
|
|
|
|
|
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(num_rings));
|
|
|
|
for_each_ring(signaller, to_i915(ring->dev), i) {
|
|
|
|
if (signaller == ring)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
intel_ring_emit(ring, RING_PSMI_CTL(signaller->mmio_base));
|
|
|
|
intel_ring_emit(ring, _MASKED_BIT_DISABLE(GEN6_PSMI_SLEEP_MSG_DISABLE));
|
|
|
|
}
|
|
|
|
}
|
2012-06-04 21:42:48 +00:00
|
|
|
intel_ring_emit(ring, MI_ARB_ON_OFF | MI_ARB_ENABLE);
|
drm/i915: Disable PSMI sleep messages on all rings around context switches
There exists a current workaround to prevent a hang on context switch
should the ring go to sleep in the middle of the restore,
WaProgramMiArbOnOffAroundMiSetContext (applicable to all gen7+). In
spite of disabling arbitration (which prevents the ring from powering
down during the critical section) we were still hitting hangs that had
the hallmarks of the known erratum. That is we are still seeing hangs
"on the last instruction in the context restore". By comparing -nightly
(broken) with requests (working), we were able to deduce that it was the
semaphore LRI cross-talk that reproduced the original failure. The key
was that requests implemented deferred semaphore signalling, and
disabling that, i.e. emitting the semaphore signal to every other ring
after every batch restored the frequent hang. Explicitly disabling PSMI
sleep on the RCS ring was insufficient, all the rings had to be awake to
prevent the hangs. Fortunately, we can reduce the wakelock to the
MI_SET_CONTEXT operation itself, and so should be able to limit the extra
power implications.
Since the MI_ARB_ON_OFF workaround is listed for all gen7 and above
products, we should apply this extra hammer for all of the same
platforms despite so far that we have only been able to reproduce the
hang on certain ivb and hsw models. The last question is whether we want
to always use the extra hammer or only when we know semaphores are in
operation. At the moment, we only use LRI on non-RCS rings for
semaphores, but that may change in the future with the possibility of
reintroducing this bug under subtle conditions.
v2: Make it explicit that the PSMI LRI are an extension to the original
workaround for the other rings.
v3: Bikeshedding variable names and whitespacing
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80660
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83677
Cc: Simon Farnsworth <simon@farnz.org.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Peter Frühberger <fritsch@xbmc.org>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-12-16 10:02:27 +00:00
|
|
|
}
|
2012-06-04 21:42:48 +00:00
|
|
|
|
2012-06-04 21:42:46 +00:00
|
|
|
intel_ring_advance(ring);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2015-03-16 16:00:55 +00:00
|
|
|
static inline bool should_skip_switch(struct intel_engine_cs *ring,
|
|
|
|
struct intel_context *from,
|
|
|
|
struct intel_context *to)
|
|
|
|
{
|
drm/i915: Track page table reload need
This patch was formerly known as, "Force pd restore when PDEs change,
gen6-7." I had to change the name because it is needed for GEN8 too.
The real issue this is trying to solve is when a new object is mapped
into the current address space. The GPU does not snoop the new mapping
so we must do the gen specific action to reload the page tables.
GEN8 and GEN7 do differ in the way they load page tables for the RCS.
GEN8 does so with the context restore, while GEN7 requires the proper
load commands in the command streamer. Non-render is similar for both.
Caveat for GEN7
The docs say you cannot change the PDEs of a currently running context.
We never map new PDEs of a running context, and expect them to be
present - so I think this is okay. (We can unmap, but this should also
be okay since we only unmap unreferenced objects that the GPU shouldn't
be tryingto va->pa xlate.) The MI_SET_CONTEXT command does have a flag
to signal that even if the context is the same, force a reload. It's
unclear exactly what this does, but I have a hunch it's the right thing
to do.
The logic assumes that we always emit a context switch after mapping new
PDEs, and before we submit a batch. This is the case today, and has been
the case since the inception of hardware contexts. A note in the comment
let's the user know.
It's not just for gen8. If the current context has mappings change, we
need a context reload to switch
v2: Rebased after ppgtt clean up patches. Split the warning for aliasing
and true ppgtt options. And do not break aliasing ppgtt, where to->ppgtt
is always null.
v3: Invalidate PPGTT TLBs inside alloc_va_range.
v4: Rename ppgtt_invalidate_tlbs to mark_tlbs_dirty and move
pd_dirty_rings from i915_address_space to i915_hw_ppgtt. Fixes when
neither ctx->ppgtt and aliasing_ppgtt exist.
v5: Removed references to teardown_va_range.
v6: Updated needs_pd_load_pre/post.
v7: Fix pd_dirty_rings check in needs_pd_load_post, and update/move
comment about updated PDEs to object_pin/bind (Mika).
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-19 12:53:28 +00:00
|
|
|
if (to->remap_slice)
|
|
|
|
return false;
|
|
|
|
|
2015-04-14 15:35:19 +00:00
|
|
|
if (to->ppgtt && from == to &&
|
|
|
|
!(intel_ring_flag(ring) & to->ppgtt->pd_dirty_rings))
|
|
|
|
return true;
|
2015-03-16 16:00:55 +00:00
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool
|
|
|
|
needs_pd_load_pre(struct intel_engine_cs *ring, struct intel_context *to)
|
|
|
|
{
|
|
|
|
struct drm_i915_private *dev_priv = ring->dev->dev_private;
|
|
|
|
|
|
|
|
if (!to->ppgtt)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (INTEL_INFO(ring->dev)->gen < 8)
|
|
|
|
return true;
|
|
|
|
|
|
|
|
if (ring != &dev_priv->ring[RCS])
|
|
|
|
return true;
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool
|
drm/i915: Initialize all contexts
The problem is we're going to switch to a new context, which could be
the default context. The plan was to use restore inhibit, which would be
fine, except if we are using dynamic page tables (which we will). If we
use dynamic page tables and we don't load new page tables, the previous
page tables might go away, and future operations will fault.
CTXA runs.
switch to default, restore inhibit
CTXA dies and has its address space taken away.
Run CTXB, tries to save using the context A's address space - this
fails.
The general solution is to make sure every context has it's own state,
and its own address space. For cases when we must restore inhibit, first
thing we do is load a valid address space. I thought this would be
enough, but apparently there are references within the context itself
which will refer to the old address space - therefore, we also must
reinitialize.
v2: to->ppgtt is only valid in full ppgtt.
v3: Rebased.
v4: Make post PDP update clearer.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 16:00:58 +00:00
|
|
|
needs_pd_load_post(struct intel_engine_cs *ring, struct intel_context *to,
|
|
|
|
u32 hw_flags)
|
2015-03-16 16:00:55 +00:00
|
|
|
{
|
|
|
|
struct drm_i915_private *dev_priv = ring->dev->dev_private;
|
|
|
|
|
|
|
|
if (!to->ppgtt)
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (!IS_GEN8(ring->dev))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
if (ring != &dev_priv->ring[RCS])
|
|
|
|
return false;
|
|
|
|
|
drm/i915: Initialize all contexts
The problem is we're going to switch to a new context, which could be
the default context. The plan was to use restore inhibit, which would be
fine, except if we are using dynamic page tables (which we will). If we
use dynamic page tables and we don't load new page tables, the previous
page tables might go away, and future operations will fault.
CTXA runs.
switch to default, restore inhibit
CTXA dies and has its address space taken away.
Run CTXB, tries to save using the context A's address space - this
fails.
The general solution is to make sure every context has it's own state,
and its own address space. For cases when we must restore inhibit, first
thing we do is load a valid address space. I thought this would be
enough, but apparently there are references within the context itself
which will refer to the old address space - therefore, we also must
reinitialize.
v2: to->ppgtt is only valid in full ppgtt.
v3: Rebased.
v4: Make post PDP update clearer.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 16:00:58 +00:00
|
|
|
if (hw_flags & MI_RESTORE_INHIBIT)
|
2015-03-16 16:00:55 +00:00
|
|
|
return true;
|
|
|
|
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2015-05-29 16:43:42 +00:00
|
|
|
static int do_switch(struct drm_i915_gem_request *req)
|
2012-06-04 21:42:46 +00:00
|
|
|
{
|
2015-05-29 16:43:42 +00:00
|
|
|
struct intel_context *to = req->ctx;
|
|
|
|
struct intel_engine_cs *ring = req->ring;
|
drm/i915: Create bind/unbind abstraction for VMAs
To sum up what goes on here, we abstract the vma binding, similarly to
the previous object binding. This helps for distinguishing legacy
binding, versus modern binding. To keep the code churn as minimal as
possible, I am leaving in insert_entries(). It serves as the per
platform pte writing basically. bind_vma and insert_entries do share a
lot of similarities, and I did have designs to combine the two, but as
mentioned already... too much churn in an already massive patchset.
What follows are the 3 commits which existed discretely in the original
submissions. Upon rebasing on Broadwell support, it became clear that
separation was not good, and only made for more error prone code. Below
are the 3 commit messages with all their history.
drm/i915: Add bind/unbind object functions to VMA
drm/i915: Use the new vm [un]bind functions
drm/i915: reduce vm->insert_entries() usage
drm/i915: Add bind/unbind object functions to VMA
As we plumb the code with more VM information, it has become more
obvious that the easiest way to deal with bind and unbind is to simply
put the function pointers in the vm, and let those choose the correct
way to handle the page table updates. This change allows many places in
the code to simply be vm->bind, and not have to worry about
distinguishing PPGTT vs GGTT.
Notice that this patch has no impact on functionality. I've decided to
save the actual change until the next patch because I think it's easier
to review that way. I'm happy to squash the two, or let Daniel do it on
merge.
v2:
Make ggtt handle the quirky aliasing ppgtt
Add flags to bind object to support above
Don't ever call bind/unbind directly for PPGTT until we have real, full
PPGTT (use NULLs to assert this)
Make sure we rebind the ggtt if there already is a ggtt binding. This
happens on set cache levels.
Use VMA for bind/unbind (Daniel, Ben)
v3: Reorganize ggtt_vma_bind to be more concise and easier to read
(Ville). Change logic in unbind to only unbind ggtt when there is a
global mapping, and to remove a redundant check if the aliasing ppgtt
exists.
v4: Make the bind function a bit smarter about the cache levels to avoid
unnecessary multiple remaps. "I accept it is a wart, I think unifying
the pin_vma / bind_vma could be unified later" (Chris)
Removed the git notes, and put version info here. (Daniel)
v5: Update the comment to not suck (Chris)
v6:
Move bind/unbind to the VMA. It makes more sense in the VMA structure
(always has, but I was previously lazy). With this change, it will allow
us to keep a distinct insert_entries.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
drm/i915: Use the new vm [un]bind functions
Building on the last patch which created the new function pointers in
the VM for bind/unbind, here we actually put those new function pointers
to use.
Split out as a separate patch to aid in review. I'm fine with squashing
into the previous patch if people request it.
v2: Updated to address the smart ggtt which can do aliasing as needed
Make sure we bind to global gtt when mappable and fenceable. I thought
we could get away without this initialy, but we cannot.
v3: Make the global GTT binding explicitly use the ggtt VM for
bind_vma(). While at it, use the new ggtt_vma helper (Chris)
At this point the original mailing list thread diverges. ie.
v4^:
use target_obj instead of obj for gen6 relocate_entry
vma->bind_vma() can be called safely during pin. So simply do that
instead of the complicated conditionals.
Don't restore PPGTT bound objects on resume path
Bug fix in resume path for globally bound Bos
Properly handle secure dispatch
Rebased on vma bind/unbind conversion
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
drm/i915: reduce vm->insert_entries() usage
FKA: drm/i915: eliminate vm->insert_entries()
With bind/unbind function pointers in place, we no longer need
insert_entries. We could, and want, to remove clear_range, however it's
not totally easy at this point. Since it's used in a couple of place
still that don't only deal in objects: setup, ppgtt init, and restore
gtt mappings.
v2: Don't actually remove insert_entries, just limit its usage. It will
be useful when we introduce gen8. It will always be called from the vma
bind/unbind.
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-06 22:10:56 +00:00
|
|
|
struct drm_i915_private *dev_priv = ring->dev->dev_private;
|
2014-05-22 13:13:37 +00:00
|
|
|
struct intel_context *from = ring->last_context;
|
2012-06-04 21:42:46 +00:00
|
|
|
u32 hw_flags = 0;
|
2014-05-30 13:16:30 +00:00
|
|
|
bool uninitialized = false;
|
drm/i915: Do remaps for all contexts
On both Ivybridge and Haswell, row remapping information is saved and
restored with context. This means, we never actually properly supported
the l3 remapping because our sysfs interface is asynchronous (and not
tied to any context), and the known faulty HW would be reused by the
next context to run.
Not that due to the asynchronous nature of the sysfs entry, there is no
point modifying the registers for the existing context. Instead we set a
flag for all contexts to load the correct remapping information on the
next run. Interested clients can use debugfs to determine whether or not
the row has been remapped.
One could propose at this point that we just do the remapping in the
kernel. I guess since we have to maintain the sysfs interface anyway,
I'm not sure how useful it is, and I do like keeping the policy in
userspace; (it wasn't my original decision to make the
interface the way it is, so I'm not attached).
v2: Force a context switch when we have a remap on the next switch.
(Ville)
Don't let userspace use the interface with disabled contexts.
v3: Don't force a context switch, just let it nop
Improper context slice remap initialization, 1<<1 instead of 1<<i, but I
rewrote it to avoid a second round of confusion.
Error print moved to error path (All Ville)
Added a comment on why the slice remap initialization happens.
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19 02:03:18 +00:00
|
|
|
int ret, i;
|
2012-06-04 21:42:46 +00:00
|
|
|
|
2013-12-06 22:11:01 +00:00
|
|
|
if (from != NULL && ring == &dev_priv->ring[RCS]) {
|
2014-07-03 15:27:59 +00:00
|
|
|
BUG_ON(from->legacy_hw_ctx.rcs_state == NULL);
|
|
|
|
BUG_ON(!i915_gem_obj_is_pinned(from->legacy_hw_ctx.rcs_state));
|
2013-12-06 22:11:01 +00:00
|
|
|
}
|
2012-06-04 21:42:46 +00:00
|
|
|
|
2015-03-16 16:00:55 +00:00
|
|
|
if (should_skip_switch(ring, from, to))
|
2012-07-15 11:34:24 +00:00
|
|
|
return 0;
|
|
|
|
|
2013-12-06 22:11:26 +00:00
|
|
|
/* Trying to pin first makes error handling easier. */
|
|
|
|
if (ring == &dev_priv->ring[RCS]) {
|
2014-07-03 15:27:59 +00:00
|
|
|
ret = i915_gem_obj_ggtt_pin(to->legacy_hw_ctx.rcs_state,
|
2014-02-14 13:01:11 +00:00
|
|
|
get_context_alignment(ring->dev), 0);
|
2013-12-06 22:11:26 +00:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
2013-12-06 22:11:01 +00:00
|
|
|
}
|
|
|
|
|
2013-12-05 14:42:34 +00:00
|
|
|
/*
|
|
|
|
* Pin can switch back to the default context if we end up calling into
|
|
|
|
* evict_everything - as a last ditch gtt defrag effort that also
|
|
|
|
* switches to the default context. Hence we need to reload from here.
|
|
|
|
*/
|
|
|
|
from = ring->last_context;
|
|
|
|
|
2015-03-16 16:00:55 +00:00
|
|
|
if (needs_pd_load_pre(ring, to)) {
|
|
|
|
/* Older GENs and non render rings still want the load first,
|
|
|
|
* "PP_DCLV followed by PP_DIR_BASE register through Load
|
|
|
|
* Register Immediate commands in Ring Buffer before submitting
|
|
|
|
* a context."*/
|
2014-11-10 13:44:31 +00:00
|
|
|
trace_switch_mm(ring, to);
|
2015-05-29 16:43:56 +00:00
|
|
|
ret = to->ppgtt->switch_mm(to->ppgtt, req);
|
2013-12-06 22:11:26 +00:00
|
|
|
if (ret)
|
|
|
|
goto unpin_out;
|
drm/i915: Track page table reload need
This patch was formerly known as, "Force pd restore when PDEs change,
gen6-7." I had to change the name because it is needed for GEN8 too.
The real issue this is trying to solve is when a new object is mapped
into the current address space. The GPU does not snoop the new mapping
so we must do the gen specific action to reload the page tables.
GEN8 and GEN7 do differ in the way they load page tables for the RCS.
GEN8 does so with the context restore, while GEN7 requires the proper
load commands in the command streamer. Non-render is similar for both.
Caveat for GEN7
The docs say you cannot change the PDEs of a currently running context.
We never map new PDEs of a running context, and expect them to be
present - so I think this is okay. (We can unmap, but this should also
be okay since we only unmap unreferenced objects that the GPU shouldn't
be tryingto va->pa xlate.) The MI_SET_CONTEXT command does have a flag
to signal that even if the context is the same, force a reload. It's
unclear exactly what this does, but I have a hunch it's the right thing
to do.
The logic assumes that we always emit a context switch after mapping new
PDEs, and before we submit a batch. This is the case today, and has been
the case since the inception of hardware contexts. A note in the comment
let's the user know.
It's not just for gen8. If the current context has mappings change, we
need a context reload to switch
v2: Rebased after ppgtt clean up patches. Split the warning for aliasing
and true ppgtt options. And do not break aliasing ppgtt, where to->ppgtt
is always null.
v3: Invalidate PPGTT TLBs inside alloc_va_range.
v4: Rename ppgtt_invalidate_tlbs to mark_tlbs_dirty and move
pd_dirty_rings from i915_address_space to i915_hw_ppgtt. Fixes when
neither ctx->ppgtt and aliasing_ppgtt exist.
v5: Removed references to teardown_va_range.
v6: Updated needs_pd_load_pre/post.
v7: Fix pd_dirty_rings check in needs_pd_load_post, and update/move
comment about updated PDEs to object_pin/bind (Mika).
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-19 12:53:28 +00:00
|
|
|
|
|
|
|
/* Doing a PD load always reloads the page dirs */
|
2015-04-14 15:35:19 +00:00
|
|
|
to->ppgtt->pd_dirty_rings &= ~intel_ring_flag(ring);
|
2013-12-06 22:11:26 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (ring != &dev_priv->ring[RCS]) {
|
|
|
|
if (from)
|
|
|
|
i915_gem_context_unreference(from);
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
|
2013-12-05 14:42:34 +00:00
|
|
|
/*
|
|
|
|
* Clear this page out of any CPU caches for coherent swap-in/out. Note
|
2012-07-15 11:34:22 +00:00
|
|
|
* that thanks to write = false in this call and us not setting any gpu
|
|
|
|
* write domains when putting a context object onto the active list
|
|
|
|
* (when switching away from it), this won't block.
|
2013-12-05 14:42:34 +00:00
|
|
|
*
|
|
|
|
* XXX: We need a real interface to do this instead of trickery.
|
|
|
|
*/
|
2014-07-03 15:27:59 +00:00
|
|
|
ret = i915_gem_object_set_to_gtt_domain(to->legacy_hw_ctx.rcs_state, false);
|
2013-12-06 22:11:26 +00:00
|
|
|
if (ret)
|
|
|
|
goto unpin_out;
|
2012-07-15 11:34:22 +00:00
|
|
|
|
drm/i915: Initialize all contexts
The problem is we're going to switch to a new context, which could be
the default context. The plan was to use restore inhibit, which would be
fine, except if we are using dynamic page tables (which we will). If we
use dynamic page tables and we don't load new page tables, the previous
page tables might go away, and future operations will fault.
CTXA runs.
switch to default, restore inhibit
CTXA dies and has its address space taken away.
Run CTXB, tries to save using the context A's address space - this
fails.
The general solution is to make sure every context has it's own state,
and its own address space. For cases when we must restore inhibit, first
thing we do is load a valid address space. I thought this would be
enough, but apparently there are references within the context itself
which will refer to the old address space - therefore, we also must
reinitialize.
v2: to->ppgtt is only valid in full ppgtt.
v3: Rebased.
v4: Make post PDP update clearer.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 16:00:58 +00:00
|
|
|
if (!to->legacy_hw_ctx.initialized) {
|
2012-06-04 21:42:46 +00:00
|
|
|
hw_flags |= MI_RESTORE_INHIBIT;
|
drm/i915: Initialize all contexts
The problem is we're going to switch to a new context, which could be
the default context. The plan was to use restore inhibit, which would be
fine, except if we are using dynamic page tables (which we will). If we
use dynamic page tables and we don't load new page tables, the previous
page tables might go away, and future operations will fault.
CTXA runs.
switch to default, restore inhibit
CTXA dies and has its address space taken away.
Run CTXB, tries to save using the context A's address space - this
fails.
The general solution is to make sure every context has it's own state,
and its own address space. For cases when we must restore inhibit, first
thing we do is load a valid address space. I thought this would be
enough, but apparently there are references within the context itself
which will refer to the old address space - therefore, we also must
reinitialize.
v2: to->ppgtt is only valid in full ppgtt.
v3: Rebased.
v4: Make post PDP update clearer.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 16:00:58 +00:00
|
|
|
/* NB: If we inhibit the restore, the context is not allowed to
|
|
|
|
* die because future work may end up depending on valid address
|
|
|
|
* space. This means we must enforce that a page table load
|
|
|
|
* occur when this occurs. */
|
|
|
|
} else if (to->ppgtt &&
|
2015-04-14 15:35:19 +00:00
|
|
|
(intel_ring_flag(ring) & to->ppgtt->pd_dirty_rings)) {
|
drm/i915: Track page table reload need
This patch was formerly known as, "Force pd restore when PDEs change,
gen6-7." I had to change the name because it is needed for GEN8 too.
The real issue this is trying to solve is when a new object is mapped
into the current address space. The GPU does not snoop the new mapping
so we must do the gen specific action to reload the page tables.
GEN8 and GEN7 do differ in the way they load page tables for the RCS.
GEN8 does so with the context restore, while GEN7 requires the proper
load commands in the command streamer. Non-render is similar for both.
Caveat for GEN7
The docs say you cannot change the PDEs of a currently running context.
We never map new PDEs of a running context, and expect them to be
present - so I think this is okay. (We can unmap, but this should also
be okay since we only unmap unreferenced objects that the GPU shouldn't
be tryingto va->pa xlate.) The MI_SET_CONTEXT command does have a flag
to signal that even if the context is the same, force a reload. It's
unclear exactly what this does, but I have a hunch it's the right thing
to do.
The logic assumes that we always emit a context switch after mapping new
PDEs, and before we submit a batch. This is the case today, and has been
the case since the inception of hardware contexts. A note in the comment
let's the user know.
It's not just for gen8. If the current context has mappings change, we
need a context reload to switch
v2: Rebased after ppgtt clean up patches. Split the warning for aliasing
and true ppgtt options. And do not break aliasing ppgtt, where to->ppgtt
is always null.
v3: Invalidate PPGTT TLBs inside alloc_va_range.
v4: Rename ppgtt_invalidate_tlbs to mark_tlbs_dirty and move
pd_dirty_rings from i915_address_space to i915_hw_ppgtt. Fixes when
neither ctx->ppgtt and aliasing_ppgtt exist.
v5: Removed references to teardown_va_range.
v6: Updated needs_pd_load_pre/post.
v7: Fix pd_dirty_rings check in needs_pd_load_post, and update/move
comment about updated PDEs to object_pin/bind (Mika).
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-19 12:53:28 +00:00
|
|
|
hw_flags |= MI_FORCE_RESTORE;
|
2015-04-14 15:35:19 +00:00
|
|
|
to->ppgtt->pd_dirty_rings &= ~intel_ring_flag(ring);
|
|
|
|
}
|
2012-06-04 21:42:46 +00:00
|
|
|
|
drm/i915: Initialize all contexts
The problem is we're going to switch to a new context, which could be
the default context. The plan was to use restore inhibit, which would be
fine, except if we are using dynamic page tables (which we will). If we
use dynamic page tables and we don't load new page tables, the previous
page tables might go away, and future operations will fault.
CTXA runs.
switch to default, restore inhibit
CTXA dies and has its address space taken away.
Run CTXB, tries to save using the context A's address space - this
fails.
The general solution is to make sure every context has it's own state,
and its own address space. For cases when we must restore inhibit, first
thing we do is load a valid address space. I thought this would be
enough, but apparently there are references within the context itself
which will refer to the old address space - therefore, we also must
reinitialize.
v2: to->ppgtt is only valid in full ppgtt.
v3: Rebased.
v4: Make post PDP update clearer.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 16:00:58 +00:00
|
|
|
/* We should never emit switch_mm more than once */
|
|
|
|
WARN_ON(needs_pd_load_pre(ring, to) &&
|
2015-04-14 15:35:19 +00:00
|
|
|
needs_pd_load_post(ring, to, hw_flags));
|
drm/i915: Initialize all contexts
The problem is we're going to switch to a new context, which could be
the default context. The plan was to use restore inhibit, which would be
fine, except if we are using dynamic page tables (which we will). If we
use dynamic page tables and we don't load new page tables, the previous
page tables might go away, and future operations will fault.
CTXA runs.
switch to default, restore inhibit
CTXA dies and has its address space taken away.
Run CTXB, tries to save using the context A's address space - this
fails.
The general solution is to make sure every context has it's own state,
and its own address space. For cases when we must restore inhibit, first
thing we do is load a valid address space. I thought this would be
enough, but apparently there are references within the context itself
which will refer to the old address space - therefore, we also must
reinitialize.
v2: to->ppgtt is only valid in full ppgtt.
v3: Rebased.
v4: Make post PDP update clearer.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 16:00:58 +00:00
|
|
|
|
2015-05-29 16:43:52 +00:00
|
|
|
ret = mi_set_context(req, hw_flags);
|
2013-12-06 22:11:26 +00:00
|
|
|
if (ret)
|
|
|
|
goto unpin_out;
|
2012-06-04 21:42:46 +00:00
|
|
|
|
drm/i915: Initialize all contexts
The problem is we're going to switch to a new context, which could be
the default context. The plan was to use restore inhibit, which would be
fine, except if we are using dynamic page tables (which we will). If we
use dynamic page tables and we don't load new page tables, the previous
page tables might go away, and future operations will fault.
CTXA runs.
switch to default, restore inhibit
CTXA dies and has its address space taken away.
Run CTXB, tries to save using the context A's address space - this
fails.
The general solution is to make sure every context has it's own state,
and its own address space. For cases when we must restore inhibit, first
thing we do is load a valid address space. I thought this would be
enough, but apparently there are references within the context itself
which will refer to the old address space - therefore, we also must
reinitialize.
v2: to->ppgtt is only valid in full ppgtt.
v3: Rebased.
v4: Make post PDP update clearer.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 16:00:58 +00:00
|
|
|
/* GEN8 does *not* require an explicit reload if the PDPs have been
|
|
|
|
* setup, and we do not wish to move them.
|
|
|
|
*/
|
|
|
|
if (needs_pd_load_post(ring, to, hw_flags)) {
|
2015-03-16 16:00:55 +00:00
|
|
|
trace_switch_mm(ring, to);
|
2015-05-29 16:43:56 +00:00
|
|
|
ret = to->ppgtt->switch_mm(to->ppgtt, req);
|
2015-03-16 16:00:55 +00:00
|
|
|
/* The hardware context switch is emitted, but we haven't
|
|
|
|
* actually changed the state - so it's probably safe to bail
|
|
|
|
* here. Still, let the user know something dangerous has
|
|
|
|
* happened.
|
|
|
|
*/
|
|
|
|
if (ret) {
|
|
|
|
DRM_ERROR("Failed to change address space on context switch\n");
|
|
|
|
goto unpin_out;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
drm/i915: Do remaps for all contexts
On both Ivybridge and Haswell, row remapping information is saved and
restored with context. This means, we never actually properly supported
the l3 remapping because our sysfs interface is asynchronous (and not
tied to any context), and the known faulty HW would be reused by the
next context to run.
Not that due to the asynchronous nature of the sysfs entry, there is no
point modifying the registers for the existing context. Instead we set a
flag for all contexts to load the correct remapping information on the
next run. Interested clients can use debugfs to determine whether or not
the row has been remapped.
One could propose at this point that we just do the remapping in the
kernel. I guess since we have to maintain the sysfs interface anyway,
I'm not sure how useful it is, and I do like keeping the policy in
userspace; (it wasn't my original decision to make the
interface the way it is, so I'm not attached).
v2: Force a context switch when we have a remap on the next switch.
(Ville)
Don't let userspace use the interface with disabled contexts.
v3: Don't force a context switch, just let it nop
Improper context slice remap initialization, 1<<1 instead of 1<<i, but I
rewrote it to avoid a second round of confusion.
Error print moved to error path (All Ville)
Added a comment on why the slice remap initialization happens.
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19 02:03:18 +00:00
|
|
|
for (i = 0; i < MAX_L3_SLICES; i++) {
|
|
|
|
if (!(to->remap_slice & (1<<i)))
|
|
|
|
continue;
|
|
|
|
|
2015-05-29 16:43:51 +00:00
|
|
|
ret = i915_gem_l3_remap(req, i);
|
drm/i915: Do remaps for all contexts
On both Ivybridge and Haswell, row remapping information is saved and
restored with context. This means, we never actually properly supported
the l3 remapping because our sysfs interface is asynchronous (and not
tied to any context), and the known faulty HW would be reused by the
next context to run.
Not that due to the asynchronous nature of the sysfs entry, there is no
point modifying the registers for the existing context. Instead we set a
flag for all contexts to load the correct remapping information on the
next run. Interested clients can use debugfs to determine whether or not
the row has been remapped.
One could propose at this point that we just do the remapping in the
kernel. I guess since we have to maintain the sysfs interface anyway,
I'm not sure how useful it is, and I do like keeping the policy in
userspace; (it wasn't my original decision to make the
interface the way it is, so I'm not attached).
v2: Force a context switch when we have a remap on the next switch.
(Ville)
Don't let userspace use the interface with disabled contexts.
v3: Don't force a context switch, just let it nop
Improper context slice remap initialization, 1<<1 instead of 1<<i, but I
rewrote it to avoid a second round of confusion.
Error print moved to error path (All Ville)
Added a comment on why the slice remap initialization happens.
CC: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-09-19 02:03:18 +00:00
|
|
|
/* If it failed, try again next round */
|
|
|
|
if (ret)
|
|
|
|
DRM_DEBUG_DRIVER("L3 remapping failed\n");
|
|
|
|
else
|
|
|
|
to->remap_slice &= ~(1<<i);
|
|
|
|
}
|
|
|
|
|
2012-06-04 21:42:46 +00:00
|
|
|
/* The backing object for the context is done after switching to the
|
|
|
|
* *next* context. Therefore we cannot retire the previous context until
|
|
|
|
* the next context has already started running. In fact, the below code
|
|
|
|
* is a bit suboptimal because the retiring can occur simply after the
|
|
|
|
* MI_SET_CONTEXT instead of when the next seqno has completed.
|
|
|
|
*/
|
2013-05-02 13:48:07 +00:00
|
|
|
if (from != NULL) {
|
2014-07-03 15:27:59 +00:00
|
|
|
from->legacy_hw_ctx.rcs_state->base.read_domains = I915_GEM_DOMAIN_INSTRUCTION;
|
2015-05-29 16:43:50 +00:00
|
|
|
i915_vma_move_to_active(i915_gem_obj_to_ggtt(from->legacy_hw_ctx.rcs_state), req);
|
2012-06-04 21:42:46 +00:00
|
|
|
/* As long as MI_SET_CONTEXT is serializing, ie. it flushes the
|
|
|
|
* whole damn pipeline, we don't need to explicitly mark the
|
|
|
|
* object dirty. The only exception is that the context must be
|
|
|
|
* correct in case the object gets swapped out. Ideally we'd be
|
|
|
|
* able to defer doing this until we know the object would be
|
|
|
|
* swapped, but there is no way to do that yet.
|
|
|
|
*/
|
2014-07-03 15:27:59 +00:00
|
|
|
from->legacy_hw_ctx.rcs_state->dirty = 1;
|
2013-05-02 13:48:07 +00:00
|
|
|
|
2013-08-26 22:50:53 +00:00
|
|
|
/* obj is kept alive until the next request by its active ref */
|
2014-07-03 15:27:59 +00:00
|
|
|
i915_gem_object_ggtt_unpin(from->legacy_hw_ctx.rcs_state);
|
2013-05-02 13:48:07 +00:00
|
|
|
i915_gem_context_unreference(from);
|
2012-06-04 21:42:46 +00:00
|
|
|
}
|
|
|
|
|
drm/i915: Initialize all contexts
The problem is we're going to switch to a new context, which could be
the default context. The plan was to use restore inhibit, which would be
fine, except if we are using dynamic page tables (which we will). If we
use dynamic page tables and we don't load new page tables, the previous
page tables might go away, and future operations will fault.
CTXA runs.
switch to default, restore inhibit
CTXA dies and has its address space taken away.
Run CTXB, tries to save using the context A's address space - this
fails.
The general solution is to make sure every context has it's own state,
and its own address space. For cases when we must restore inhibit, first
thing we do is load a valid address space. I thought this would be
enough, but apparently there are references within the context itself
which will refer to the old address space - therefore, we also must
reinitialize.
v2: to->ppgtt is only valid in full ppgtt.
v3: Rebased.
v4: Make post PDP update clearer.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+)
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 16:00:58 +00:00
|
|
|
uninitialized = !to->legacy_hw_ctx.initialized;
|
2014-07-03 15:27:59 +00:00
|
|
|
to->legacy_hw_ctx.initialized = true;
|
2014-05-30 13:16:30 +00:00
|
|
|
|
2013-12-06 22:11:01 +00:00
|
|
|
done:
|
2013-05-02 13:48:07 +00:00
|
|
|
i915_gem_context_reference(to);
|
|
|
|
ring->last_context = to;
|
2012-06-04 21:42:46 +00:00
|
|
|
|
2014-05-30 13:16:30 +00:00
|
|
|
if (uninitialized) {
|
2014-08-26 13:44:50 +00:00
|
|
|
if (ring->init_context) {
|
2015-05-29 16:43:44 +00:00
|
|
|
ret = ring->init_context(req);
|
2014-08-26 13:44:50 +00:00
|
|
|
if (ret)
|
|
|
|
DRM_ERROR("ring init context: %d\n", ret);
|
|
|
|
}
|
2014-05-21 16:01:06 +00:00
|
|
|
}
|
|
|
|
|
2012-06-04 21:42:46 +00:00
|
|
|
return 0;
|
2013-12-06 22:11:26 +00:00
|
|
|
|
|
|
|
unpin_out:
|
|
|
|
if (ring->id == RCS)
|
2014-07-03 15:27:59 +00:00
|
|
|
i915_gem_object_ggtt_unpin(to->legacy_hw_ctx.rcs_state);
|
2013-12-06 22:11:26 +00:00
|
|
|
return ret;
|
2012-06-04 21:42:46 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* i915_switch_context() - perform a GPU context switch.
|
2015-05-29 16:43:41 +00:00
|
|
|
* @req: request for which we'll execute the context switch
|
2012-06-04 21:42:46 +00:00
|
|
|
*
|
|
|
|
* The context life cycle is simple. The context refcount is incremented and
|
|
|
|
* decremented by 1 and create and destroy. If the context is in use by the GPU,
|
2014-08-20 15:29:24 +00:00
|
|
|
* it will have a refcount > 1. This allows us to destroy the context abstract
|
2012-06-04 21:42:46 +00:00
|
|
|
* object while letting the normal object tracking destroy the backing BO.
|
2014-08-20 15:29:24 +00:00
|
|
|
*
|
|
|
|
* This function should not be used in execlists mode. Instead the context is
|
|
|
|
* switched by writing to the ELSP and requests keep a reference to their
|
|
|
|
* context.
|
2012-06-04 21:42:46 +00:00
|
|
|
*/
|
2015-05-29 16:43:41 +00:00
|
|
|
int i915_switch_context(struct drm_i915_gem_request *req)
|
2012-06-04 21:42:46 +00:00
|
|
|
{
|
2015-05-29 16:43:41 +00:00
|
|
|
struct intel_engine_cs *ring = req->ring;
|
2012-06-04 21:42:46 +00:00
|
|
|
struct drm_i915_private *dev_priv = ring->dev->dev_private;
|
|
|
|
|
2014-08-20 15:29:24 +00:00
|
|
|
WARN_ON(i915.enable_execlists);
|
2013-12-06 22:11:19 +00:00
|
|
|
WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
|
|
|
|
|
2015-05-29 16:43:41 +00:00
|
|
|
if (req->ctx->legacy_hw_ctx.rcs_state == NULL) { /* We have the fake context */
|
|
|
|
if (req->ctx != ring->last_context) {
|
|
|
|
i915_gem_context_reference(req->ctx);
|
2014-04-09 08:07:36 +00:00
|
|
|
if (ring->last_context)
|
|
|
|
i915_gem_context_unreference(ring->last_context);
|
2015-05-29 16:43:41 +00:00
|
|
|
ring->last_context = req->ctx;
|
2014-04-09 08:07:36 +00:00
|
|
|
}
|
2013-12-06 22:11:20 +00:00
|
|
|
return 0;
|
2014-03-14 14:22:10 +00:00
|
|
|
}
|
2013-12-06 22:11:20 +00:00
|
|
|
|
2015-05-29 16:43:42 +00:00
|
|
|
return do_switch(req);
|
2012-06-04 21:42:46 +00:00
|
|
|
}
|
2012-06-04 21:42:54 +00:00
|
|
|
|
2014-07-24 16:04:18 +00:00
|
|
|
static bool contexts_enabled(struct drm_device *dev)
|
2014-04-09 08:07:36 +00:00
|
|
|
{
|
2014-07-24 16:04:18 +00:00
|
|
|
return i915.enable_execlists || to_i915(dev)->hw_context_size;
|
2014-04-09 08:07:36 +00:00
|
|
|
}
|
|
|
|
|
2012-06-04 21:42:54 +00:00
|
|
|
int i915_gem_context_create_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file)
|
|
|
|
{
|
|
|
|
struct drm_i915_gem_context_create *args = data;
|
|
|
|
struct drm_i915_file_private *file_priv = file->driver_priv;
|
2014-05-22 13:13:37 +00:00
|
|
|
struct intel_context *ctx;
|
2012-06-04 21:42:54 +00:00
|
|
|
int ret;
|
|
|
|
|
2014-07-24 16:04:18 +00:00
|
|
|
if (!contexts_enabled(dev))
|
2012-06-19 15:16:01 +00:00
|
|
|
return -ENODEV;
|
|
|
|
|
2012-06-04 21:42:54 +00:00
|
|
|
ret = i915_mutex_lock_interruptible(dev);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
2014-08-06 13:04:54 +00:00
|
|
|
ctx = i915_gem_create_context(dev, file_priv);
|
2012-06-04 21:42:54 +00:00
|
|
|
mutex_unlock(&dev->struct_mutex);
|
2012-07-17 06:44:49 +00:00
|
|
|
if (IS_ERR(ctx))
|
|
|
|
return PTR_ERR(ctx);
|
2012-06-04 21:42:54 +00:00
|
|
|
|
drm/i915: Emphasize that ctx->id is merely a user handle
This is an Execlists preparatory patch, since they make context ID become an
overloaded term:
- In the software, it was used to distinguish which context userspace was
trying to use.
- In the BSpec, the term is used to describe the 20-bits long field the
hardware uses to it to discriminate the contexts that are submitted to
the ELSP and inform the driver about their current status (via Context
Switch Interrupts and Context Status Buffers).
Initially, I tried to make the different meanings converge, but it proved
impossible:
- The software ctx->id is per-filp, while the hardware one needs to be
globally unique.
- Also, we multiplex several backing states objects per intel_context,
and all of them need unique HW IDs.
- I tried adding a per-filp ID and then composing the HW context ID as:
ctx->id + file_priv->id + ring->id, but the fact that the hardware only
uses 20-bits means we have to artificially limit the number of filps or
contexts the userspace can create.
The ctx->user_handle renaming bits are done with this Cocci patch (plus
manual frobbing of the struct declaration):
@@
struct intel_context c;
@@
- (c).id
+ c.user_handle
@@
struct intel_context *c;
@@
- (c)->id
+ c->user_handle
Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and
change the type to unsigned 32 bits.
v2: s/handle/user_handle and change the type to uint32_t as suggested by
Chris Wilson.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 15:28:00 +00:00
|
|
|
args->ctx_id = ctx->user_handle;
|
2012-06-04 21:42:54 +00:00
|
|
|
DRM_DEBUG_DRIVER("HW context %d created\n", args->ctx_id);
|
|
|
|
|
2012-07-17 06:44:49 +00:00
|
|
|
return 0;
|
2012-06-04 21:42:54 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int i915_gem_context_destroy_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file)
|
|
|
|
{
|
|
|
|
struct drm_i915_gem_context_destroy *args = data;
|
|
|
|
struct drm_i915_file_private *file_priv = file->driver_priv;
|
2014-05-22 13:13:37 +00:00
|
|
|
struct intel_context *ctx;
|
2012-06-04 21:42:54 +00:00
|
|
|
int ret;
|
|
|
|
|
drm/i915: Emphasize that ctx->id is merely a user handle
This is an Execlists preparatory patch, since they make context ID become an
overloaded term:
- In the software, it was used to distinguish which context userspace was
trying to use.
- In the BSpec, the term is used to describe the 20-bits long field the
hardware uses to it to discriminate the contexts that are submitted to
the ELSP and inform the driver about their current status (via Context
Switch Interrupts and Context Status Buffers).
Initially, I tried to make the different meanings converge, but it proved
impossible:
- The software ctx->id is per-filp, while the hardware one needs to be
globally unique.
- Also, we multiplex several backing states objects per intel_context,
and all of them need unique HW IDs.
- I tried adding a per-filp ID and then composing the HW context ID as:
ctx->id + file_priv->id + ring->id, but the fact that the hardware only
uses 20-bits means we have to artificially limit the number of filps or
contexts the userspace can create.
The ctx->user_handle renaming bits are done with this Cocci patch (plus
manual frobbing of the struct declaration):
@@
struct intel_context c;
@@
- (c).id
+ c.user_handle
@@
struct intel_context *c;
@@
- (c)->id
+ c->user_handle
Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and
change the type to unsigned 32 bits.
v2: s/handle/user_handle and change the type to uint32_t as suggested by
Chris Wilson.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 15:28:00 +00:00
|
|
|
if (args->ctx_id == DEFAULT_CONTEXT_HANDLE)
|
2013-12-25 00:02:54 +00:00
|
|
|
return -ENOENT;
|
2013-12-06 22:11:19 +00:00
|
|
|
|
2012-06-04 21:42:54 +00:00
|
|
|
ret = i915_mutex_lock_interruptible(dev);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ctx = i915_gem_context_get(file_priv, args->ctx_id);
|
2014-01-03 05:50:27 +00:00
|
|
|
if (IS_ERR(ctx)) {
|
2012-06-04 21:42:54 +00:00
|
|
|
mutex_unlock(&dev->struct_mutex);
|
2014-01-03 05:50:27 +00:00
|
|
|
return PTR_ERR(ctx);
|
2012-06-04 21:42:54 +00:00
|
|
|
}
|
|
|
|
|
drm/i915: Emphasize that ctx->id is merely a user handle
This is an Execlists preparatory patch, since they make context ID become an
overloaded term:
- In the software, it was used to distinguish which context userspace was
trying to use.
- In the BSpec, the term is used to describe the 20-bits long field the
hardware uses to it to discriminate the contexts that are submitted to
the ELSP and inform the driver about their current status (via Context
Switch Interrupts and Context Status Buffers).
Initially, I tried to make the different meanings converge, but it proved
impossible:
- The software ctx->id is per-filp, while the hardware one needs to be
globally unique.
- Also, we multiplex several backing states objects per intel_context,
and all of them need unique HW IDs.
- I tried adding a per-filp ID and then composing the HW context ID as:
ctx->id + file_priv->id + ring->id, but the fact that the hardware only
uses 20-bits means we have to artificially limit the number of filps or
contexts the userspace can create.
The ctx->user_handle renaming bits are done with this Cocci patch (plus
manual frobbing of the struct declaration):
@@
struct intel_context c;
@@
- (c).id
+ c.user_handle
@@
struct intel_context *c;
@@
- (c)->id
+ c->user_handle
Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and
change the type to unsigned 32 bits.
v2: s/handle/user_handle and change the type to uint32_t as suggested by
Chris Wilson.
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1)
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 15:28:00 +00:00
|
|
|
idr_remove(&ctx->file_priv->context_idr, ctx->user_handle);
|
2013-04-30 10:30:33 +00:00
|
|
|
i915_gem_context_unreference(ctx);
|
2012-06-04 21:42:54 +00:00
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
|
|
|
|
DRM_DEBUG_DRIVER("HW context %d destroyed\n", args->ctx_id);
|
|
|
|
return 0;
|
|
|
|
}
|
2014-12-24 16:13:40 +00:00
|
|
|
|
|
|
|
int i915_gem_context_getparam_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file)
|
|
|
|
{
|
|
|
|
struct drm_i915_file_private *file_priv = file->driver_priv;
|
|
|
|
struct drm_i915_gem_context_param *args = data;
|
|
|
|
struct intel_context *ctx;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = i915_mutex_lock_interruptible(dev);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ctx = i915_gem_context_get(file_priv, args->ctx_id);
|
|
|
|
if (IS_ERR(ctx)) {
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
return PTR_ERR(ctx);
|
|
|
|
}
|
|
|
|
|
|
|
|
args->size = 0;
|
|
|
|
switch (args->param) {
|
|
|
|
case I915_CONTEXT_PARAM_BAN_PERIOD:
|
|
|
|
args->value = ctx->hang_stats.ban_period_seconds;
|
|
|
|
break;
|
2015-05-20 14:00:13 +00:00
|
|
|
case I915_CONTEXT_PARAM_NO_ZEROMAP:
|
|
|
|
args->value = ctx->flags & CONTEXT_NO_ZEROMAP;
|
|
|
|
break;
|
2015-10-14 13:17:11 +00:00
|
|
|
case I915_CONTEXT_PARAM_GTT_SIZE:
|
|
|
|
if (ctx->ppgtt)
|
|
|
|
args->value = ctx->ppgtt->base.total;
|
|
|
|
else if (to_i915(dev)->mm.aliasing_ppgtt)
|
|
|
|
args->value = to_i915(dev)->mm.aliasing_ppgtt->base.total;
|
|
|
|
else
|
|
|
|
args->value = to_i915(dev)->gtt.base.total;
|
|
|
|
break;
|
2014-12-24 16:13:40 +00:00
|
|
|
default:
|
|
|
|
ret = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
int i915_gem_context_setparam_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file)
|
|
|
|
{
|
|
|
|
struct drm_i915_file_private *file_priv = file->driver_priv;
|
|
|
|
struct drm_i915_gem_context_param *args = data;
|
|
|
|
struct intel_context *ctx;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = i915_mutex_lock_interruptible(dev);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ctx = i915_gem_context_get(file_priv, args->ctx_id);
|
|
|
|
if (IS_ERR(ctx)) {
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
return PTR_ERR(ctx);
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (args->param) {
|
|
|
|
case I915_CONTEXT_PARAM_BAN_PERIOD:
|
|
|
|
if (args->size)
|
|
|
|
ret = -EINVAL;
|
|
|
|
else if (args->value < ctx->hang_stats.ban_period_seconds &&
|
|
|
|
!capable(CAP_SYS_ADMIN))
|
|
|
|
ret = -EPERM;
|
|
|
|
else
|
|
|
|
ctx->hang_stats.ban_period_seconds = args->value;
|
|
|
|
break;
|
2015-05-20 14:00:13 +00:00
|
|
|
case I915_CONTEXT_PARAM_NO_ZEROMAP:
|
|
|
|
if (args->size) {
|
|
|
|
ret = -EINVAL;
|
|
|
|
} else {
|
|
|
|
ctx->flags &= ~CONTEXT_NO_ZEROMAP;
|
|
|
|
ctx->flags |= args->value ? CONTEXT_NO_ZEROMAP : 0;
|
|
|
|
}
|
|
|
|
break;
|
2014-12-24 16:13:40 +00:00
|
|
|
default:
|
|
|
|
ret = -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|