linux/kernel/bpf/cpumap.c

676 lines
19 KiB
C
Raw Normal View History

bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
/* bpf/cpumap.c
*
* Copyright (c) 2017 Jesper Dangaard Brouer, Red Hat Inc.
* Released under terms in GPL version 2. See COPYING.
*/
/* The 'cpumap' is primarily used as a backend map for XDP BPF helper
* call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'.
*
* Unlike devmap which redirects XDP frames out another NIC device,
* this map type redirects raw XDP frames to another CPU. The remote
* CPU will do SKB-allocation and call the normal network stack.
*
* This is a scalability and isolation mechanism, that allow
* separating the early driver network XDP layer, from the rest of the
* netstack, and assigning dedicated CPUs for this stage. This
* basically allows for 10G wirespeed pre-filtering via bpf.
*/
#include <linux/bpf.h>
#include <linux/filter.h>
#include <linux/ptr_ring.h>
#include <net/xdp.h>
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
#include <linux/sched.h>
#include <linux/workqueue.h>
#include <linux/kthread.h>
#include <linux/capability.h>
#include <trace/events/xdp.h>
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
#include <linux/netdevice.h> /* netif_receive_skb_core */
#include <linux/etherdevice.h> /* eth_type_trans */
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
/* General idea: XDP packets getting XDP redirected to another CPU,
* will maximum be stored/queued for one driver ->poll() call. It is
* guaranteed that setting flush bit and flush operation happen on
* same CPU. Thus, cpu_map_flush operation can deduct via this_cpu_ptr()
* which queue in bpf_cpu_map_entry contains packets.
*/
#define CPU_MAP_BULK_SIZE 8 /* 8 == one cacheline on 64-bit archs */
struct xdp_bulk_queue {
void *q[CPU_MAP_BULK_SIZE];
unsigned int count;
};
/* Struct for every remote "destination" CPU in map */
struct bpf_cpu_map_entry {
u32 cpu; /* kthread CPU and map index */
int map_id; /* Back reference to map */
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
u32 qsize; /* Queue size placeholder for map lookup */
/* XDP can run multiple RX-ring queues, need __percpu enqueue store */
struct xdp_bulk_queue __percpu *bulkq;
/* Queue with potential multi-producers, and single-consumer kthread */
struct ptr_ring *queue;
struct task_struct *kthread;
struct work_struct kthread_stop_wq;
atomic_t refcnt; /* Control when this struct can be free'ed */
struct rcu_head rcu;
};
struct bpf_cpu_map {
struct bpf_map map;
/* Below members specific for map type */
struct bpf_cpu_map_entry **cpu_map;
unsigned long __percpu *flush_needed;
};
static int bq_flush_to_queue(struct bpf_cpu_map_entry *rcpu,
struct xdp_bulk_queue *bq, bool in_napi_ctx);
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
static u64 cpu_map_bitmap_size(const union bpf_attr *attr)
{
return BITS_TO_LONGS(attr->max_entries) * sizeof(unsigned long);
}
static struct bpf_map *cpu_map_alloc(union bpf_attr *attr)
{
struct bpf_cpu_map *cmap;
int err = -ENOMEM;
u64 cost;
int ret;
if (!capable(CAP_SYS_ADMIN))
return ERR_PTR(-EPERM);
/* check sanity of attributes */
if (attr->max_entries == 0 || attr->key_size != 4 ||
attr->value_size != 4 || attr->map_flags & ~BPF_F_NUMA_NODE)
return ERR_PTR(-EINVAL);
cmap = kzalloc(sizeof(*cmap), GFP_USER);
if (!cmap)
return ERR_PTR(-ENOMEM);
bpf_map_init_from_attr(&cmap->map, attr);
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
/* Pre-limit array size based on NR_CPUS, not final CPU check */
if (cmap->map.max_entries > NR_CPUS) {
err = -E2BIG;
goto free_cmap;
}
/* make sure page count doesn't overflow */
cost = (u64) cmap->map.max_entries * sizeof(struct bpf_cpu_map_entry *);
cost += cpu_map_bitmap_size(attr) * num_possible_cpus();
if (cost >= U32_MAX - PAGE_SIZE)
goto free_cmap;
cmap->map.pages = round_up(cost, PAGE_SIZE) >> PAGE_SHIFT;
/* Notice returns -EPERM on if map size is larger than memlock limit */
ret = bpf_map_precharge_memlock(cmap->map.pages);
if (ret) {
err = ret;
goto free_cmap;
}
/* A per cpu bitfield with a bit per possible CPU in map */
cmap->flush_needed = __alloc_percpu(cpu_map_bitmap_size(attr),
__alignof__(unsigned long));
if (!cmap->flush_needed)
goto free_cmap;
/* Alloc array for possible remote "destination" CPUs */
cmap->cpu_map = bpf_map_area_alloc(cmap->map.max_entries *
sizeof(struct bpf_cpu_map_entry *),
cmap->map.numa_node);
if (!cmap->cpu_map)
goto free_percpu;
return &cmap->map;
free_percpu:
free_percpu(cmap->flush_needed);
free_cmap:
kfree(cmap);
return ERR_PTR(err);
}
static void get_cpu_map_entry(struct bpf_cpu_map_entry *rcpu)
{
atomic_inc(&rcpu->refcnt);
}
/* called from workqueue, to workaround syscall using preempt_disable */
static void cpu_map_kthread_stop(struct work_struct *work)
{
struct bpf_cpu_map_entry *rcpu;
rcpu = container_of(work, struct bpf_cpu_map_entry, kthread_stop_wq);
/* Wait for flush in __cpu_map_entry_free(), via full RCU barrier,
* as it waits until all in-flight call_rcu() callbacks complete.
*/
rcu_barrier();
/* kthread_stop will wake_up_process and wait for it to complete */
kthread_stop(rcpu->kthread);
}
static struct sk_buff *cpu_map_build_skb(struct bpf_cpu_map_entry *rcpu,
struct xdp_frame *xdpf)
{
unsigned int frame_size;
void *pkt_data_start;
struct sk_buff *skb;
/* build_skb need to place skb_shared_info after SKB end, and
* also want to know the memory "truesize". Thus, need to
* know the memory frame size backing xdp_buff.
*
* XDP was designed to have PAGE_SIZE frames, but this
* assumption is not longer true with ixgbe and i40e. It
* would be preferred to set frame_size to 2048 or 4096
* depending on the driver.
* frame_size = 2048;
* frame_len = frame_size - sizeof(*xdp_frame);
*
* Instead, with info avail, skb_shared_info in placed after
* packet len. This, unfortunately fakes the truesize.
* Another disadvantage of this approach, the skb_shared_info
* is not at a fixed memory location, with mixed length
* packets, which is bad for cache-line hotness.
*/
frame_size = SKB_DATA_ALIGN(xdpf->len) + xdpf->headroom +
SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
pkt_data_start = xdpf->data - xdpf->headroom;
skb = build_skb(pkt_data_start, frame_size);
if (!skb)
return NULL;
skb_reserve(skb, xdpf->headroom);
__skb_put(skb, xdpf->len);
if (xdpf->metasize)
skb_metadata_set(skb, xdpf->metasize);
/* Essential SKB info: protocol and skb->dev */
skb->protocol = eth_type_trans(skb, xdpf->dev_rx);
/* Optional SKB info, currently missing:
* - HW checksum info (skb->ip_summed)
* - HW RX hash (skb_set_hash)
* - RX ring dev queue index (skb_record_rx_queue)
*/
return skb;
}
static void __cpu_map_ring_cleanup(struct ptr_ring *ring)
{
/* The tear-down procedure should have made sure that queue is
* empty. See __cpu_map_entry_replace() and work-queue
* invoked cpu_map_kthread_stop(). Catch any broken behaviour
* gracefully and warn once.
*/
struct xdp_frame *xdpf;
while ((xdpf = ptr_ring_consume(ring)))
if (WARN_ON_ONCE(xdpf))
xdp: transition into using xdp_frame for return API Changing API xdp_return_frame() to take struct xdp_frame as argument, seems like a natural choice. But there are some subtle performance details here that needs extra care, which is a deliberate choice. When de-referencing xdp_frame on a remote CPU during DMA-TX completion, result in the cache-line is change to "Shared" state. Later when the page is reused for RX, then this xdp_frame cache-line is written, which change the state to "Modified". This situation already happens (naturally) for, virtio_net, tun and cpumap as the xdp_frame pointer is the queued object. In tun and cpumap, the ptr_ring is used for efficiently transferring cache-lines (with pointers) between CPUs. Thus, the only option is to de-referencing xdp_frame. It is only the ixgbe driver that had an optimization, in which it can avoid doing the de-reference of xdp_frame. The driver already have TX-ring queue, which (in case of remote DMA-TX completion) have to be transferred between CPUs anyhow. In this data area, we stored a struct xdp_mem_info and a data pointer, which allowed us to avoid de-referencing xdp_frame. To compensate for this, a prefetchw is used for telling the cache coherency protocol about our access pattern. My benchmarks show that this prefetchw is enough to compensate the ixgbe driver. V7: Adjust for commit d9314c474d4f ("i40e: add support for XDP_REDIRECT") V8: Adjust for commit bd658dda4237 ("net/mlx5e: Separate dma base address and offset in dma_sync call") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:32 +00:00
xdp_return_frame(xdpf);
}
static void put_cpu_map_entry(struct bpf_cpu_map_entry *rcpu)
{
if (atomic_dec_and_test(&rcpu->refcnt)) {
/* The queue should be empty at this point */
__cpu_map_ring_cleanup(rcpu->queue);
ptr_ring_cleanup(rcpu->queue, NULL);
kfree(rcpu->queue);
kfree(rcpu);
}
}
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
static int cpu_map_kthread_run(void *data)
{
struct bpf_cpu_map_entry *rcpu = data;
set_current_state(TASK_INTERRUPTIBLE);
/* When kthread gives stop order, then rcpu have been disconnected
* from map, thus no new packets can enter. Remaining in-flight
* per CPU stored packets are flushed to this queue. Wait honoring
* kthread_stop signal until queue is empty.
*/
while (!kthread_should_stop() || !__ptr_ring_empty(rcpu->queue)) {
unsigned int processed = 0, drops = 0, sched = 0;
struct xdp_frame *xdpf;
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
/* Release CPU reschedule checks */
if (__ptr_ring_empty(rcpu->queue)) {
set_current_state(TASK_INTERRUPTIBLE);
/* Recheck to avoid lost wake-up */
if (__ptr_ring_empty(rcpu->queue)) {
schedule();
sched = 1;
} else {
__set_current_state(TASK_RUNNING);
}
} else {
sched = cond_resched();
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
}
/* Process packets in rcpu->queue */
local_bh_disable();
/*
* The bpf_cpu_map_entry is single consumer, with this
* kthread CPU pinned. Lockless access to ptr_ring
* consume side valid as no-resize allowed of queue.
*/
while ((xdpf = __ptr_ring_consume(rcpu->queue))) {
struct sk_buff *skb;
int ret;
skb = cpu_map_build_skb(rcpu, xdpf);
if (!skb) {
xdp: transition into using xdp_frame for return API Changing API xdp_return_frame() to take struct xdp_frame as argument, seems like a natural choice. But there are some subtle performance details here that needs extra care, which is a deliberate choice. When de-referencing xdp_frame on a remote CPU during DMA-TX completion, result in the cache-line is change to "Shared" state. Later when the page is reused for RX, then this xdp_frame cache-line is written, which change the state to "Modified". This situation already happens (naturally) for, virtio_net, tun and cpumap as the xdp_frame pointer is the queued object. In tun and cpumap, the ptr_ring is used for efficiently transferring cache-lines (with pointers) between CPUs. Thus, the only option is to de-referencing xdp_frame. It is only the ixgbe driver that had an optimization, in which it can avoid doing the de-reference of xdp_frame. The driver already have TX-ring queue, which (in case of remote DMA-TX completion) have to be transferred between CPUs anyhow. In this data area, we stored a struct xdp_mem_info and a data pointer, which allowed us to avoid de-referencing xdp_frame. To compensate for this, a prefetchw is used for telling the cache coherency protocol about our access pattern. My benchmarks show that this prefetchw is enough to compensate the ixgbe driver. V7: Adjust for commit d9314c474d4f ("i40e: add support for XDP_REDIRECT") V8: Adjust for commit bd658dda4237 ("net/mlx5e: Separate dma base address and offset in dma_sync call") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17 14:46:32 +00:00
xdp_return_frame(xdpf);
continue;
}
/* Inject into network stack */
ret = netif_receive_skb_core(skb);
if (ret == NET_RX_DROP)
drops++;
/* Limit BH-disable period */
if (++processed == 8)
break;
}
/* Feedback loop via tracepoint */
trace_xdp_cpumap_kthread(rcpu->map_id, processed, drops, sched);
local_bh_enable(); /* resched point, may call do_softirq() */
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
}
__set_current_state(TASK_RUNNING);
put_cpu_map_entry(rcpu);
return 0;
}
static struct bpf_cpu_map_entry *__cpu_map_entry_alloc(u32 qsize, u32 cpu,
int map_id)
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
{
gfp_t gfp = GFP_KERNEL | __GFP_NOWARN;
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
struct bpf_cpu_map_entry *rcpu;
int numa, err;
/* Have map->numa_node, but choose node of redirect target CPU */
numa = cpu_to_node(cpu);
rcpu = kzalloc_node(sizeof(*rcpu), gfp, numa);
if (!rcpu)
return NULL;
/* Alloc percpu bulkq */
rcpu->bulkq = __alloc_percpu_gfp(sizeof(*rcpu->bulkq),
sizeof(void *), gfp);
if (!rcpu->bulkq)
goto free_rcu;
/* Alloc queue */
rcpu->queue = kzalloc_node(sizeof(*rcpu->queue), gfp, numa);
if (!rcpu->queue)
goto free_bulkq;
err = ptr_ring_init(rcpu->queue, qsize, gfp);
if (err)
goto free_queue;
rcpu->cpu = cpu;
rcpu->map_id = map_id;
rcpu->qsize = qsize;
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
/* Setup kthread */
rcpu->kthread = kthread_create_on_node(cpu_map_kthread_run, rcpu, numa,
"cpumap/%d/map:%d", cpu, map_id);
if (IS_ERR(rcpu->kthread))
goto free_ptr_ring;
get_cpu_map_entry(rcpu); /* 1-refcnt for being in cmap->cpu_map[] */
get_cpu_map_entry(rcpu); /* 1-refcnt for kthread */
/* Make sure kthread runs on a single CPU */
kthread_bind(rcpu->kthread, cpu);
wake_up_process(rcpu->kthread);
return rcpu;
free_ptr_ring:
ptr_ring_cleanup(rcpu->queue, NULL);
free_queue:
kfree(rcpu->queue);
free_bulkq:
free_percpu(rcpu->bulkq);
free_rcu:
kfree(rcpu);
return NULL;
}
static void __cpu_map_entry_free(struct rcu_head *rcu)
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
{
struct bpf_cpu_map_entry *rcpu;
int cpu;
/* This cpu_map_entry have been disconnected from map and one
* RCU graze-period have elapsed. Thus, XDP cannot queue any
* new packets and cannot change/set flush_needed that can
* find this entry.
*/
rcpu = container_of(rcu, struct bpf_cpu_map_entry, rcu);
/* Flush remaining packets in percpu bulkq */
for_each_online_cpu(cpu) {
struct xdp_bulk_queue *bq = per_cpu_ptr(rcpu->bulkq, cpu);
/* No concurrent bq_enqueue can run at this point */
bq_flush_to_queue(rcpu, bq, false);
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
}
free_percpu(rcpu->bulkq);
/* Cannot kthread_stop() here, last put free rcpu resources */
put_cpu_map_entry(rcpu);
}
/* After xchg pointer to bpf_cpu_map_entry, use the call_rcu() to
* ensure any driver rcu critical sections have completed, but this
* does not guarantee a flush has happened yet. Because driver side
* rcu_read_lock/unlock only protects the running XDP program. The
* atomic xchg and NULL-ptr check in __cpu_map_flush() makes sure a
* pending flush op doesn't fail.
*
* The bpf_cpu_map_entry is still used by the kthread, and there can
* still be pending packets (in queue and percpu bulkq). A refcnt
* makes sure to last user (kthread_stop vs. call_rcu) free memory
* resources.
*
* The rcu callback __cpu_map_entry_free flush remaining packets in
* percpu bulkq to queue. Due to caller map_delete_elem() disable
* preemption, cannot call kthread_stop() to make sure queue is empty.
* Instead a work_queue is started for stopping kthread,
* cpu_map_kthread_stop, which waits for an RCU graze period before
* stopping kthread, emptying the queue.
*/
static void __cpu_map_entry_replace(struct bpf_cpu_map *cmap,
u32 key_cpu, struct bpf_cpu_map_entry *rcpu)
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
{
struct bpf_cpu_map_entry *old_rcpu;
old_rcpu = xchg(&cmap->cpu_map[key_cpu], rcpu);
if (old_rcpu) {
call_rcu(&old_rcpu->rcu, __cpu_map_entry_free);
INIT_WORK(&old_rcpu->kthread_stop_wq, cpu_map_kthread_stop);
schedule_work(&old_rcpu->kthread_stop_wq);
}
}
static int cpu_map_delete_elem(struct bpf_map *map, void *key)
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
{
struct bpf_cpu_map *cmap = container_of(map, struct bpf_cpu_map, map);
u32 key_cpu = *(u32 *)key;
if (key_cpu >= map->max_entries)
return -EINVAL;
/* notice caller map_delete_elem() use preempt_disable() */
__cpu_map_entry_replace(cmap, key_cpu, NULL);
return 0;
}
static int cpu_map_update_elem(struct bpf_map *map, void *key, void *value,
u64 map_flags)
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
{
struct bpf_cpu_map *cmap = container_of(map, struct bpf_cpu_map, map);
struct bpf_cpu_map_entry *rcpu;
/* Array index key correspond to CPU number */
u32 key_cpu = *(u32 *)key;
/* Value is the queue size */
u32 qsize = *(u32 *)value;
if (unlikely(map_flags > BPF_EXIST))
return -EINVAL;
if (unlikely(key_cpu >= cmap->map.max_entries))
return -E2BIG;
if (unlikely(map_flags == BPF_NOEXIST))
return -EEXIST;
if (unlikely(qsize > 16384)) /* sanity limit on qsize */
return -EOVERFLOW;
/* Make sure CPU is a valid possible cpu */
if (!cpu_possible(key_cpu))
return -ENODEV;
if (qsize == 0) {
rcpu = NULL; /* Same as deleting */
} else {
/* Updating qsize cause re-allocation of bpf_cpu_map_entry */
rcpu = __cpu_map_entry_alloc(qsize, key_cpu, map->id);
if (!rcpu)
return -ENOMEM;
}
rcu_read_lock();
__cpu_map_entry_replace(cmap, key_cpu, rcpu);
rcu_read_unlock();
return 0;
}
static void cpu_map_free(struct bpf_map *map)
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
{
struct bpf_cpu_map *cmap = container_of(map, struct bpf_cpu_map, map);
int cpu;
u32 i;
/* At this point bpf_prog->aux->refcnt == 0 and this map->refcnt == 0,
* so the bpf programs (can be more than one that used this map) were
* disconnected from events. Wait for outstanding critical sections in
* these programs to complete. The rcu critical section only guarantees
* no further "XDP/bpf-side" reads against bpf_cpu_map->cpu_map.
* It does __not__ ensure pending flush operations (if any) are
* complete.
*/
bpf: fix redirect to map under tail calls Commits 109980b894e9 ("bpf: don't select potentially stale ri->map from buggy xdp progs") and 7c3001313396 ("bpf: fix ri->map_owner pointer on bpf_prog_realloc") tried to mitigate that buggy programs using bpf_redirect_map() helper call do not leave stale maps behind. Idea was to add a map_owner cookie into the per CPU struct redirect_info which was set to prog->aux by the prog making the helper call as a proof that the map is not stale since the prog is implicitly holding a reference to it. This owner cookie could later on get compared with the program calling into BPF whether they match and therefore the redirect could proceed with processing the map safely. In (obvious) hindsight, this approach breaks down when tail calls are involved since the original caller's prog->aux pointer does not have to match the one from one of the progs out of the tail call chain, and therefore the xdp buffer will be dropped instead of redirected. A way around that would be to fix the issue differently (which also allows to remove related work in fast path at the same time): once the life-time of a redirect map has come to its end we use it's map free callback where we need to wait on synchronize_rcu() for current outstanding xdp buffers and remove such a map pointer from the redirect info if found to be present. At that time no program is using this map anymore so we simply invalidate the map pointers to NULL iff they previously pointed to that instance while making sure that the redirect path only reads out the map once. Fixes: 97f91a7cf04f ("bpf: add bpf_redirect_map helper routine") Fixes: 109980b894e9 ("bpf: don't select potentially stale ri->map from buggy xdp progs") Reported-by: Sebastiano Miano <sebastiano.miano@polito.it> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-08-17 21:26:14 +00:00
bpf_clear_redirect_map(map);
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
synchronize_rcu();
/* To ensure all pending flush operations have completed wait for flush
* bitmap to indicate all flush_needed bits to be zero on _all_ cpus.
* Because the above synchronize_rcu() ensures the map is disconnected
* from the program we can assume no new bits will be set.
*/
for_each_online_cpu(cpu) {
unsigned long *bitmap = per_cpu_ptr(cmap->flush_needed, cpu);
while (!bitmap_empty(bitmap, cmap->map.max_entries))
cond_resched();
}
/* For cpu_map the remote CPUs can still be using the entries
* (struct bpf_cpu_map_entry).
*/
for (i = 0; i < cmap->map.max_entries; i++) {
struct bpf_cpu_map_entry *rcpu;
rcpu = READ_ONCE(cmap->cpu_map[i]);
if (!rcpu)
continue;
/* bq flush and cleanup happens after RCU graze-period */
__cpu_map_entry_replace(cmap, i, NULL); /* call_rcu */
}
free_percpu(cmap->flush_needed);
bpf_map_area_free(cmap->cpu_map);
kfree(cmap);
}
struct bpf_cpu_map_entry *__cpu_map_lookup_elem(struct bpf_map *map, u32 key)
{
struct bpf_cpu_map *cmap = container_of(map, struct bpf_cpu_map, map);
struct bpf_cpu_map_entry *rcpu;
if (key >= map->max_entries)
return NULL;
rcpu = READ_ONCE(cmap->cpu_map[key]);
return rcpu;
}
static void *cpu_map_lookup_elem(struct bpf_map *map, void *key)
{
struct bpf_cpu_map_entry *rcpu =
__cpu_map_lookup_elem(map, *(u32 *)key);
return rcpu ? &rcpu->qsize : NULL;
}
static int cpu_map_get_next_key(struct bpf_map *map, void *key, void *next_key)
{
struct bpf_cpu_map *cmap = container_of(map, struct bpf_cpu_map, map);
u32 index = key ? *(u32 *)key : U32_MAX;
u32 *next = next_key;
if (index >= cmap->map.max_entries) {
*next = 0;
return 0;
}
if (index == cmap->map.max_entries - 1)
return -ENOENT;
*next = index + 1;
return 0;
}
const struct bpf_map_ops cpu_map_ops = {
.map_alloc = cpu_map_alloc,
.map_free = cpu_map_free,
.map_delete_elem = cpu_map_delete_elem,
.map_update_elem = cpu_map_update_elem,
.map_lookup_elem = cpu_map_lookup_elem,
.map_get_next_key = cpu_map_get_next_key,
.map_check_btf = map_check_no_btf,
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
};
static int bq_flush_to_queue(struct bpf_cpu_map_entry *rcpu,
struct xdp_bulk_queue *bq, bool in_napi_ctx)
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
{
unsigned int processed = 0, drops = 0;
const int to_cpu = rcpu->cpu;
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
struct ptr_ring *q;
int i;
if (unlikely(!bq->count))
return 0;
q = rcpu->queue;
spin_lock(&q->producer_lock);
for (i = 0; i < bq->count; i++) {
struct xdp_frame *xdpf = bq->q[i];
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
int err;
err = __ptr_ring_produce(q, xdpf);
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
if (err) {
drops++;
if (likely(in_napi_ctx))
xdp_return_frame_rx_napi(xdpf);
else
xdp_return_frame(xdpf);
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
}
processed++;
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
}
bq->count = 0;
spin_unlock(&q->producer_lock);
/* Feedback loop via tracepoints */
trace_xdp_cpumap_enqueue(rcpu->map_id, processed, drops, to_cpu);
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
return 0;
}
/* Runs under RCU-read-side, plus in softirq under NAPI protection.
* Thus, safe percpu variable access.
*/
static int bq_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_frame *xdpf)
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
{
struct xdp_bulk_queue *bq = this_cpu_ptr(rcpu->bulkq);
if (unlikely(bq->count == CPU_MAP_BULK_SIZE))
bq_flush_to_queue(rcpu, bq, true);
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
/* Notice, xdp_buff/page MUST be queued here, long enough for
* driver to code invoking us to finished, due to driver
* (e.g. ixgbe) recycle tricks based on page-refcnt.
*
* Thus, incoming xdp_frame is always queued here (else we race
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
* with another CPU on page-refcnt and remaining driver code).
* Queue time is very short, as driver will invoke flush
* operation, when completing napi->poll call.
*/
bq->q[bq->count++] = xdpf;
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
return 0;
}
int cpu_map_enqueue(struct bpf_cpu_map_entry *rcpu, struct xdp_buff *xdp,
struct net_device *dev_rx)
{
struct xdp_frame *xdpf;
xdpf = convert_to_xdp_frame(xdp);
if (unlikely(!xdpf))
return -EOVERFLOW;
/* Info needed when constructing SKB on remote CPU */
xdpf->dev_rx = dev_rx;
bq_enqueue(rcpu, xdpf);
return 0;
}
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
void __cpu_map_insert_ctx(struct bpf_map *map, u32 bit)
{
struct bpf_cpu_map *cmap = container_of(map, struct bpf_cpu_map, map);
unsigned long *bitmap = this_cpu_ptr(cmap->flush_needed);
__set_bit(bit, bitmap);
}
void __cpu_map_flush(struct bpf_map *map)
{
struct bpf_cpu_map *cmap = container_of(map, struct bpf_cpu_map, map);
unsigned long *bitmap = this_cpu_ptr(cmap->flush_needed);
u32 bit;
/* The napi->poll softirq makes sure __cpu_map_insert_ctx()
* and __cpu_map_flush() happen on same CPU. Thus, the percpu
* bitmap indicate which percpu bulkq have packets.
*/
for_each_set_bit(bit, bitmap, map->max_entries) {
struct bpf_cpu_map_entry *rcpu = READ_ONCE(cmap->cpu_map[bit]);
struct xdp_bulk_queue *bq;
/* This is possible if entry is removed by user space
* between xdp redirect and flush op.
*/
if (unlikely(!rcpu))
continue;
__clear_bit(bit, bitmap);
/* Flush all frames in bulkq to real queue */
bq = this_cpu_ptr(rcpu->bulkq);
bq_flush_to_queue(rcpu, bq, true);
bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP The 'cpumap' is primarily used as a backend map for XDP BPF helper call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'. This patch implement the main part of the map. It is not connected to the XDP redirect system yet, and no SKB allocation are done yet. The main concern in this patch is to ensure the datapath can run without any locking. This adds complexity to the setup and tear-down procedure, which assumptions are extra carefully documented in the code comments. V2: - make sure array isn't larger than NR_CPUS - make sure CPUs added is a valid possible CPU V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl> V5: - Restrict map allocation to root / CAP_SYS_ADMIN - WARN_ON_ONCE if queue is not empty on tear-down - Return -EPERM on memlock limit instead of -ENOMEM - Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup() - Moved cpu_map_enqueue() to next patch V6: all notice by Daniel Borkmann - Fix err return code in cpu_map_alloc() introduced in V5 - Move cpu_possible() check after max_entries boundary check - Forbid usage initially in check_map_func_compatibility() V7: - Fix alloc error path spotted by Daniel Borkmann - Did stress test adding+removing CPUs from the map concurrently - Fixed refcnt issue on cpu_map_entry, kthread started too soon - Make sure packets are flushed during tear-down, involved use of rcu_barrier() and kthread_run only exit after queue is empty - Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring V8: - Nitpicking comments and gramma by Edward Cree - Fix missing semi-colon introduced in V7 due to rebasing - Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-16 10:19:28 +00:00
/* If already running, costs spin_lock_irqsave + smb_mb */
wake_up_process(rcpu->kthread);
}
}