linux/drivers/devfreq/event/exynos-ppmu.c

375 lines
8.6 KiB
C
Raw Normal View History

PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 04:16:27 +00:00
/*
* exynos_ppmu.c - EXYNOS PPMU (Platform Performance Monitoring Unit) support
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* Author : Chanwoo Choi <cw00.choi@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This driver is based on drivers/devfreq/exynos/exynos_ppmu.c
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/suspend.h>
#include <linux/devfreq-event.h>
#include "exynos-ppmu.h"
struct exynos_ppmu_data {
void __iomem *base;
struct clk *clk;
};
struct exynos_ppmu {
struct devfreq_event_dev **edev;
struct devfreq_event_desc *desc;
unsigned int num_events;
struct device *dev;
struct mutex lock;
struct exynos_ppmu_data ppmu;
};
#define PPMU_EVENT(name) \
{ "ppmu-event0-"#name, PPMU_PMNCNT0 }, \
{ "ppmu-event1-"#name, PPMU_PMNCNT1 }, \
{ "ppmu-event2-"#name, PPMU_PMNCNT2 }, \
{ "ppmu-event3-"#name, PPMU_PMNCNT3 }
struct __exynos_ppmu_events {
char *name;
int id;
} ppmu_events[] = {
/* For Exynos3250, Exynos4 and Exynos5260 */
PPMU_EVENT(g3d),
PPMU_EVENT(fsys),
/* For Exynos4 SoCs and Exynos3250 */
PPMU_EVENT(dmc0),
PPMU_EVENT(dmc1),
PPMU_EVENT(cpu),
PPMU_EVENT(rightbus),
PPMU_EVENT(leftbus),
PPMU_EVENT(lcd0),
PPMU_EVENT(camif),
/* Only for Exynos3250 and Exynos5260 */
PPMU_EVENT(mfc),
/* Only for Exynos4 SoCs */
PPMU_EVENT(mfc-left),
PPMU_EVENT(mfc-right),
/* Only for Exynos5260 SoCs */
PPMU_EVENT(drex0-s0),
PPMU_EVENT(drex0-s1),
PPMU_EVENT(drex1-s0),
PPMU_EVENT(drex1-s1),
PPMU_EVENT(eagle),
PPMU_EVENT(kfc),
PPMU_EVENT(isp),
PPMU_EVENT(fimc),
PPMU_EVENT(gscl),
PPMU_EVENT(mscl),
PPMU_EVENT(fimd0x),
PPMU_EVENT(fimd1x),
{ /* sentinel */ },
};
static int exynos_ppmu_find_ppmu_id(struct devfreq_event_dev *edev)
{
int i;
for (i = 0; i < ARRAY_SIZE(ppmu_events); i++)
if (!strcmp(edev->desc->name, ppmu_events[i].name))
return ppmu_events[i].id;
return -EINVAL;
}
static int exynos_ppmu_disable(struct devfreq_event_dev *edev)
{
struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
u32 pmnc;
/* Disable all counters */
__raw_writel(PPMU_CCNT_MASK |
PPMU_PMCNT0_MASK |
PPMU_PMCNT1_MASK |
PPMU_PMCNT2_MASK |
PPMU_PMCNT3_MASK,
info->ppmu.base + PPMU_CNTENC);
/* Disable PPMU */
pmnc = __raw_readl(info->ppmu.base + PPMU_PMNC);
pmnc &= ~PPMU_PMNC_ENABLE_MASK;
__raw_writel(pmnc, info->ppmu.base + PPMU_PMNC);
return 0;
}
static int exynos_ppmu_set_event(struct devfreq_event_dev *edev)
{
struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
int id = exynos_ppmu_find_ppmu_id(edev);
u32 pmnc, cntens;
if (id < 0)
return id;
/* Enable specific counter */
cntens = __raw_readl(info->ppmu.base + PPMU_CNTENS);
cntens |= (PPMU_CCNT_MASK | (PPMU_ENABLE << id));
__raw_writel(cntens, info->ppmu.base + PPMU_CNTENS);
/* Set the event of Read/Write data count */
__raw_writel(PPMU_RO_DATA_CNT | PPMU_WO_DATA_CNT,
info->ppmu.base + PPMU_BEVTxSEL(id));
/* Reset cycle counter/performance counter and enable PPMU */
pmnc = __raw_readl(info->ppmu.base + PPMU_PMNC);
pmnc &= ~(PPMU_PMNC_ENABLE_MASK
| PPMU_PMNC_COUNTER_RESET_MASK
| PPMU_PMNC_CC_RESET_MASK);
pmnc |= (PPMU_ENABLE << PPMU_PMNC_ENABLE_SHIFT);
pmnc |= (PPMU_ENABLE << PPMU_PMNC_COUNTER_RESET_SHIFT);
pmnc |= (PPMU_ENABLE << PPMU_PMNC_CC_RESET_SHIFT);
__raw_writel(pmnc, info->ppmu.base + PPMU_PMNC);
return 0;
}
static int exynos_ppmu_get_event(struct devfreq_event_dev *edev,
struct devfreq_event_data *edata)
{
struct exynos_ppmu *info = devfreq_event_get_drvdata(edev);
int id = exynos_ppmu_find_ppmu_id(edev);
u32 pmnc, cntenc;
if (id < 0)
return -EINVAL;
/* Disable PPMU */
pmnc = __raw_readl(info->ppmu.base + PPMU_PMNC);
pmnc &= ~PPMU_PMNC_ENABLE_MASK;
__raw_writel(pmnc, info->ppmu.base + PPMU_PMNC);
/* Read cycle count */
edata->total_count = __raw_readl(info->ppmu.base + PPMU_CCNT);
/* Read performance count */
switch (id) {
case PPMU_PMNCNT0:
case PPMU_PMNCNT1:
case PPMU_PMNCNT2:
edata->load_count
= __raw_readl(info->ppmu.base + PPMU_PMNCT(id));
break;
case PPMU_PMNCNT3:
edata->load_count =
((__raw_readl(info->ppmu.base + PPMU_PMCNT3_HIGH) << 8)
| __raw_readl(info->ppmu.base + PPMU_PMCNT3_LOW));
break;
default:
return -EINVAL;
}
/* Disable specific counter */
cntenc = __raw_readl(info->ppmu.base + PPMU_CNTENC);
cntenc |= (PPMU_CCNT_MASK | (PPMU_ENABLE << id));
__raw_writel(cntenc, info->ppmu.base + PPMU_CNTENC);
dev_dbg(&edev->dev, "%s (event: %ld/%ld)\n", edev->desc->name,
edata->load_count, edata->total_count);
return 0;
}
static const struct devfreq_event_ops exynos_ppmu_ops = {
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 04:16:27 +00:00
.disable = exynos_ppmu_disable,
.set_event = exynos_ppmu_set_event,
.get_event = exynos_ppmu_get_event,
};
static int of_get_devfreq_events(struct device_node *np,
struct exynos_ppmu *info)
{
struct devfreq_event_desc *desc;
struct device *dev = info->dev;
struct device_node *events_np, *node;
int i, j, count;
events_np = of_get_child_by_name(np, "events");
if (!events_np) {
dev_err(dev,
"failed to get child node of devfreq-event devices\n");
return -EINVAL;
}
count = of_get_child_count(events_np);
desc = devm_kzalloc(dev, sizeof(*desc) * count, GFP_KERNEL);
if (!desc)
return -ENOMEM;
info->num_events = count;
j = 0;
for_each_child_of_node(events_np, node) {
for (i = 0; i < ARRAY_SIZE(ppmu_events); i++) {
if (!ppmu_events[i].name)
continue;
if (!of_node_cmp(node->name, ppmu_events[i].name))
break;
}
if (i == ARRAY_SIZE(ppmu_events)) {
dev_warn(dev,
"don't know how to configure events : %s\n",
node->name);
continue;
}
desc[j].ops = &exynos_ppmu_ops;
desc[j].driver_data = info;
of_property_read_string(node, "event-name", &desc[j].name);
j++;
of_node_put(node);
}
info->desc = desc;
of_node_put(events_np);
return 0;
}
static int exynos_ppmu_parse_dt(struct exynos_ppmu *info)
{
struct device *dev = info->dev;
struct device_node *np = dev->of_node;
int ret = 0;
if (!np) {
dev_err(dev, "failed to find devicetree node\n");
return -EINVAL;
}
/* Maps the memory mapped IO to control PPMU register */
info->ppmu.base = of_iomap(np, 0);
if (IS_ERR_OR_NULL(info->ppmu.base)) {
dev_err(dev, "failed to map memory region\n");
return -ENOMEM;
}
info->ppmu.clk = devm_clk_get(dev, "ppmu");
if (IS_ERR(info->ppmu.clk)) {
info->ppmu.clk = NULL;
dev_warn(dev, "cannot get PPMU clock\n");
}
ret = of_get_devfreq_events(np, info);
if (ret < 0) {
dev_err(dev, "failed to parse exynos ppmu dt node\n");
goto err;
}
return 0;
err:
iounmap(info->ppmu.base);
return ret;
}
static int exynos_ppmu_probe(struct platform_device *pdev)
{
struct exynos_ppmu *info;
struct devfreq_event_dev **edev;
struct devfreq_event_desc *desc;
int i, ret = 0, size;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
mutex_init(&info->lock);
info->dev = &pdev->dev;
/* Parse dt data to get resource */
ret = exynos_ppmu_parse_dt(info);
if (ret < 0) {
dev_err(&pdev->dev,
"failed to parse devicetree for resource\n");
return ret;
}
desc = info->desc;
size = sizeof(struct devfreq_event_dev *) * info->num_events;
info->edev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!info->edev) {
dev_err(&pdev->dev,
"failed to allocate memory devfreq-event devices\n");
return -ENOMEM;
}
edev = info->edev;
platform_set_drvdata(pdev, info);
for (i = 0; i < info->num_events; i++) {
edev[i] = devm_devfreq_event_add_edev(&pdev->dev, &desc[i]);
if (IS_ERR(edev[i])) {
ret = PTR_ERR(edev[i]);
PM / devfreq: event: Add devfreq_event class This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-26 04:16:27 +00:00
dev_err(&pdev->dev,
"failed to add devfreq-event device\n");
goto err;
}
}
clk_prepare_enable(info->ppmu.clk);
return 0;
err:
iounmap(info->ppmu.base);
return ret;
}
static int exynos_ppmu_remove(struct platform_device *pdev)
{
struct exynos_ppmu *info = platform_get_drvdata(pdev);
clk_disable_unprepare(info->ppmu.clk);
iounmap(info->ppmu.base);
return 0;
}
static struct of_device_id exynos_ppmu_id_match[] = {
{ .compatible = "samsung,exynos-ppmu", },
{ /* sentinel */ },
};
static struct platform_driver exynos_ppmu_driver = {
.probe = exynos_ppmu_probe,
.remove = exynos_ppmu_remove,
.driver = {
.name = "exynos-ppmu",
.of_match_table = exynos_ppmu_id_match,
},
};
module_platform_driver(exynos_ppmu_driver);
MODULE_DESCRIPTION("Exynos PPMU(Platform Performance Monitoring Unit) driver");
MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
MODULE_LICENSE("GPL");