leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f40788a666
linux/arch/arm/boot/dts/omap4.dtsi

443 lines
9.9 KiB
Plaintext
Raw Normal View History

arm/dts: Add initial device tree support for OMAP4 SoC Add initial device-tree support for OMAP4 SoC. This is based on the original panda board patch done by Manju: http://permalink.gmane.org/gmane.linux.ports.arm.omap/60393 Add the generic GIC interrupt-controller from ARM. Add an empty "soc" node to contain non memory mapped IPs (DSP, MPU, IPU...). Note: Since reg, irq and dma are provided by hwmod for the moment, these attributes will not be present at all in DTS to highlight the gap. They will be added as soon as dma bindings will be there and drivers will be adapted. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-08-09 15:15:17 +00:00
/*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Carveout for multimedia usecases
* It should be the last 48MB of the first 512MB memory part
* In theory, it should not even exist. That zone should be reserved
* dynamically during the .reserve callback.
*/
/memreserve/ 0x9d000000 0x03000000;
/include/ "skeleton.dtsi"
/ {
compatible = "ti,omap4430", "ti,omap4";
interrupt-parent = <&gic>;
aliases {
ARM: omap: pass minimal SoC/board data for UART from dt Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 11:55:46 +00:00
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
arm/dts: Add initial device tree support for OMAP4 SoC Add initial device-tree support for OMAP4 SoC. This is based on the original panda board patch done by Manju: http://permalink.gmane.org/gmane.linux.ports.arm.omap/60393 Add the generic GIC interrupt-controller from ARM. Add an empty "soc" node to contain non memory mapped IPs (DSP, MPU, IPU...). Note: Since reg, irq and dma are provided by hwmod for the moment, these attributes will not be present at all in DTS to highlight the gap. They will be added as soon as dma bindings will be there and drivers will be adapted. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-08-09 15:15:17 +00:00
};
arm/dts: OMAP3+: Add mpu, dsp and iva nodes Add nodes for devices used by PM code (mpu, dsp, iva). Add a cpus node as well as recommended in the DT spec. Remove mpu, dsp, iva devices init if is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Kevin Hilman <khilman@ti.com>
2011-08-16 09:49:08 +00:00
cpus {
cpu@0 {
compatible = "arm,cortex-a9";
ARM: OMAP4: Add L2 Cache Controller in Device Tree Provide PL310 Level 2 Cache Controller Device Tree support for OMAP4 based devices. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-04 12:27:34 +00:00
next-level-cache = <&L2>;
arm/dts: OMAP3+: Add mpu, dsp and iva nodes Add nodes for devices used by PM code (mpu, dsp, iva). Add a cpus node as well as recommended in the DT spec. Remove mpu, dsp, iva devices init if is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Kevin Hilman <khilman@ti.com>
2011-08-16 09:49:08 +00:00
};
cpu@1 {
compatible = "arm,cortex-a9";
ARM: OMAP4: Add L2 Cache Controller in Device Tree Provide PL310 Level 2 Cache Controller Device Tree support for OMAP4 based devices. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-04 12:27:34 +00:00
next-level-cache = <&L2>;
arm/dts: OMAP3+: Add mpu, dsp and iva nodes Add nodes for devices used by PM code (mpu, dsp, iva). Add a cpus node as well as recommended in the DT spec. Remove mpu, dsp, iva devices init if is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Kevin Hilman <khilman@ti.com>
2011-08-16 09:49:08 +00:00
};
};
ARM: dts: OMAP4: Cleanup and move GIC outside of the OCP Remove some useless comment and move GIC controller outside of the OCP node since it does use the MPU internal bus and not the OCP. This will not change the functionality but will reflect the reality more accurately. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-09-03 15:56:32 +00:00
gic: interrupt-controller@48241000 {
compatible = "arm,cortex-a9-gic";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0x48241000 0x1000>,
<0x48240100 0x0100>;
};
ARM: OMAP4: Add L2 Cache Controller in Device Tree Provide PL310 Level 2 Cache Controller Device Tree support for OMAP4 based devices. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-04 12:27:34 +00:00
L2: l2-cache-controller@48242000 {
compatible = "arm,pl310-cache";
reg = <0x48242000 0x1000>;
cache-unified;
cache-level = <2>;
};
ARM: OMAP4: Add local timer support for Device Tree Add cortex-a9 local timer support for all OMAP4 based SOCs using DT. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-04 13:02:32 +00:00
local-timer@0x48240600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x48240600 0x20>;
interrupts = <1 13 0x304>;
};
arm/dts: Add initial device tree support for OMAP4 SoC Add initial device-tree support for OMAP4 SoC. This is based on the original panda board patch done by Manju: http://permalink.gmane.org/gmane.linux.ports.arm.omap/60393 Add the generic GIC interrupt-controller from ARM. Add an empty "soc" node to contain non memory mapped IPs (DSP, MPU, IPU...). Note: Since reg, irq and dma are provided by hwmod for the moment, these attributes will not be present at all in DTS to highlight the gap. They will be added as soon as dma bindings will be there and drivers will be adapted. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-08-09 15:15:17 +00:00
/*
* The soc node represents the soc top level view. It is uses for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
compatible = "ti,omap-infra";
arm/dts: OMAP3+: Add mpu, dsp and iva nodes Add nodes for devices used by PM code (mpu, dsp, iva). Add a cpus node as well as recommended in the DT spec. Remove mpu, dsp, iva devices init if is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Kevin Hilman <khilman@ti.com>
2011-08-16 09:49:08 +00:00
mpu {
compatible = "ti,omap4-mpu";
ti,hwmods = "mpu";
};
dsp {
compatible = "ti,omap3-c64";
ti,hwmods = "dsp";
};
iva {
compatible = "ti,ivahd";
ti,hwmods = "iva";
};
arm/dts: Add initial device tree support for OMAP4 SoC Add initial device-tree support for OMAP4 SoC. This is based on the original panda board patch done by Manju: http://permalink.gmane.org/gmane.linux.ports.arm.omap/60393 Add the generic GIC interrupt-controller from ARM. Add an empty "soc" node to contain non memory mapped IPs (DSP, MPU, IPU...). Note: Since reg, irq and dma are provided by hwmod for the moment, these attributes will not be present at all in DTS to highlight the gap. They will be added as soon as dma bindings will be there and drivers will be adapted. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-08-09 15:15:17 +00:00
};
/*
* XXX: Use a flat representation of the OMAP4 interconnect.
* The real OMAP interconnect network is quite complex.
* Since that will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
ocp {
arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver Used the main OCP node to add bindings with the l3_noc driver. Remove l3_noc static device creation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-08-12 11:48:47 +00:00
compatible = "ti,omap4-l3-noc", "simple-bus";
arm/dts: Add initial device tree support for OMAP4 SoC Add initial device-tree support for OMAP4 SoC. This is based on the original panda board patch done by Manju: http://permalink.gmane.org/gmane.linux.ports.arm.omap/60393 Add the generic GIC interrupt-controller from ARM. Add an empty "soc" node to contain non memory mapped IPs (DSP, MPU, IPU...). Note: Since reg, irq and dma are provided by hwmod for the moment, these attributes will not be present at all in DTS to highlight the gap. They will be added as soon as dma bindings will be there and drivers will be adapted. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-08-09 15:15:17 +00:00
#address-cells = <1>;
#size-cells = <1>;
ranges;
arm/dts: OMAP4: Add a main ocp entry bound to l3-noc driver Used the main OCP node to add bindings with the l3_noc driver. Remove l3_noc static device creation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Tony Lindgren <tony@atomide.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
2011-08-12 11:48:47 +00:00
ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
arm/dts: Add initial device tree support for OMAP4 SoC Add initial device-tree support for OMAP4 SoC. This is based on the original panda board patch done by Manju: http://permalink.gmane.org/gmane.linux.ports.arm.omap/60393 Add the generic GIC interrupt-controller from ARM. Add an empty "soc" node to contain non memory mapped IPs (DSP, MPU, IPU...). Note: Since reg, irq and dma are provided by hwmod for the moment, these attributes will not be present at all in DTS to highlight the gap. They will be added as soon as dma bindings will be there and drivers will be adapted. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-08-09 15:15:17 +00:00
arm/dts: Add pinctrl driver entries for omap2/3/4 Add pinctrl driver entries for omap2+. These all use the generic pinctrl-single driver for the padconf registers. Cc: devicetree-discuss@lists.ozlabs.org Acked-by: Linus Walleij <linus.walleij@linaro.org> [tony@atomide.com: updated to drop omap2420.dtsi rename changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-10 17:34:51 +00:00
omap4_pmx_core: pinmux@4a100040 {
compatible = "ti,omap4-padconf", "pinctrl-single";
reg = <0x4a100040 0x0196>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0x7fff>;
};
omap4_pmx_wkup: pinmux@4a31e040 {
compatible = "ti,omap4-padconf", "pinctrl-single";
reg = <0x4a31e040 0x0038>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,register-width = <16>;
pinctrl-single,function-mask = <0x7fff>;
};
arm/dts: OMAP4: Add gpio nodes Add the 6 GPIOs controller nodes present in OMAP4. Remove gpio static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca>
2011-08-16 09:51:54 +00:00
gpio1: gpio@4a310000 {
compatible = "ti,omap4-gpio";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4a310000 0x200>;
interrupts = <0 29 0x4>;
arm/dts: OMAP4: Add gpio nodes Add the 6 GPIOs controller nodes present in OMAP4. Remove gpio static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca>
2011-08-16 09:51:54 +00:00
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x48055000 0x200>;
interrupts = <0 30 0x4>;
arm/dts: OMAP4: Add gpio nodes Add the 6 GPIOs controller nodes present in OMAP4. Remove gpio static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca>
2011-08-16 09:51:54 +00:00
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x48057000 0x200>;
interrupts = <0 31 0x4>;
arm/dts: OMAP4: Add gpio nodes Add the 6 GPIOs controller nodes present in OMAP4. Remove gpio static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca>
2011-08-16 09:51:54 +00:00
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x48059000 0x200>;
interrupts = <0 32 0x4>;
arm/dts: OMAP4: Add gpio nodes Add the 6 GPIOs controller nodes present in OMAP4. Remove gpio static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca>
2011-08-16 09:51:54 +00:00
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4805b000 0x200>;
interrupts = <0 33 0x4>;
arm/dts: OMAP4: Add gpio nodes Add the 6 GPIOs controller nodes present in OMAP4. Remove gpio static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca>
2011-08-16 09:51:54 +00:00
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4805d000 0x200>;
interrupts = <0 34 0x4>;
arm/dts: OMAP4: Add gpio nodes Add the 6 GPIOs controller nodes present in OMAP4. Remove gpio static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca>
2011-08-16 09:51:54 +00:00
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <1>;
};
ARM: omap: pass minimal SoC/board data for UART from dt Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 11:55:46 +00:00
arm/dts: OMAP3&4: Remove the '0x' prefix for serial nodes Follow the DTS convention and thus name the nodes <name>@<address> without any '0x' prefix in the physical address. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-02-16 10:55:27 +00:00
uart1: serial@4806a000 {
ARM: omap: pass minimal SoC/board data for UART from dt Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 11:55:46 +00:00
compatible = "ti,omap4-uart";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4806a000 0x100>;
interrupts = <0 72 0x4>;
ARM: omap: pass minimal SoC/board data for UART from dt Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 11:55:46 +00:00
ti,hwmods = "uart1";
clock-frequency = <48000000>;
};
arm/dts: OMAP3&4: Remove the '0x' prefix for serial nodes Follow the DTS convention and thus name the nodes <name>@<address> without any '0x' prefix in the physical address. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-02-16 10:55:27 +00:00
uart2: serial@4806c000 {
ARM: omap: pass minimal SoC/board data for UART from dt Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 11:55:46 +00:00
compatible = "ti,omap4-uart";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4806c000 0x100>;
interrupts = <0 73 0x4>;
ARM: omap: pass minimal SoC/board data for UART from dt Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 11:55:46 +00:00
ti,hwmods = "uart2";
clock-frequency = <48000000>;
};
arm/dts: OMAP3&4: Remove the '0x' prefix for serial nodes Follow the DTS convention and thus name the nodes <name>@<address> without any '0x' prefix in the physical address. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-02-16 10:55:27 +00:00
uart3: serial@48020000 {
ARM: omap: pass minimal SoC/board data for UART from dt Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 11:55:46 +00:00
compatible = "ti,omap4-uart";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x48020000 0x100>;
interrupts = <0 74 0x4>;
ARM: omap: pass minimal SoC/board data for UART from dt Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 11:55:46 +00:00
ti,hwmods = "uart3";
clock-frequency = <48000000>;
};
arm/dts: OMAP3&4: Remove the '0x' prefix for serial nodes Follow the DTS convention and thus name the nodes <name>@<address> without any '0x' prefix in the physical address. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-02-16 10:55:27 +00:00
uart4: serial@4806e000 {
ARM: omap: pass minimal SoC/board data for UART from dt Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 11:55:46 +00:00
compatible = "ti,omap4-uart";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4806e000 0x100>;
interrupts = <0 70 0x4>;
ARM: omap: pass minimal SoC/board data for UART from dt Pass minimal data needed for console boot, from dt, for OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the static initialization from generic board file. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-12-14 11:55:46 +00:00
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
arm/dts: OMAP4: Add i2c controller nodes Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-08-17 13:30:03 +00:00
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x48070000 0x100>;
interrupts = <0 56 0x4>;
arm/dts: OMAP4: Add i2c controller nodes Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-08-17 13:30:03 +00:00
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
};
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x48072000 0x100>;
interrupts = <0 57 0x4>;
arm/dts: OMAP4: Add i2c controller nodes Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-08-17 13:30:03 +00:00
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
};
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x48060000 0x100>;
interrupts = <0 61 0x4>;
arm/dts: OMAP4: Add i2c controller nodes Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-08-17 13:30:03 +00:00
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
};
i2c4: i2c@48350000 {
compatible = "ti,omap4-i2c";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x48350000 0x100>;
interrupts = <0 62 0x4>;
arm/dts: OMAP4: Add i2c controller nodes Add i2c controllers nodes into the main ocp bus. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
2011-08-17 13:30:03 +00:00
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
};
arm/dts: OMAP4: Add SPI controller nodes Add the 4 McSPI controller nodes present in an OMAP4 device. Remove SPI static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-01-20 13:15:58 +00:00
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x48098000 0x200>;
interrupts = <0 65 0x4>;
arm/dts: OMAP4: Add SPI controller nodes Add the 4 McSPI controller nodes present in an OMAP4 device. Remove SPI static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-01-20 13:15:58 +00:00
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
ti,spi-num-cs = <4>;
};
mcspi2: spi@4809a000 {
compatible = "ti,omap4-mcspi";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4809a000 0x200>;
interrupts = <0 66 0x4>;
arm/dts: OMAP4: Add SPI controller nodes Add the 4 McSPI controller nodes present in an OMAP4 device. Remove SPI static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-01-20 13:15:58 +00:00
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
ti,spi-num-cs = <2>;
};
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x480b8000 0x200>;
interrupts = <0 91 0x4>;
arm/dts: OMAP4: Add SPI controller nodes Add the 4 McSPI controller nodes present in an OMAP4 device. Remove SPI static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-01-20 13:15:58 +00:00
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
ti,spi-num-cs = <2>;
};
mcspi4: spi@480ba000 {
compatible = "ti,omap4-mcspi";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x480ba000 0x200>;
interrupts = <0 48 0x4>;
arm/dts: OMAP4: Add SPI controller nodes Add the 4 McSPI controller nodes present in an OMAP4 device. Remove SPI static device initialisation if DT is populated. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Grant Likely <grant.likely@secretlab.ca> Acked-by: Rob Herring <rob.herring@calxeda.com>
2012-01-20 13:15:58 +00:00
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
ti,spi-num-cs = <1>;
};
arm/dts: OMAP4: Add mmc controller nodes and board data Add OMAP mmc related device tree data for OMAP4. Currenly limited to only omap4-panda and omap4-sdp boards. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2011-10-04 11:40:27 +00:00
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4809c000 0x400>;
interrupts = <0 83 0x4>;
arm/dts: OMAP4: Add mmc controller nodes and board data Add OMAP mmc related device tree data for OMAP4. Currenly limited to only omap4-panda and omap4-sdp boards. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2011-10-04 11:40:27 +00:00
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
};
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x480b4000 0x400>;
interrupts = <0 86 0x4>;
arm/dts: OMAP4: Add mmc controller nodes and board data Add OMAP mmc related device tree data for OMAP4. Currenly limited to only omap4-panda and omap4-sdp boards. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2011-10-04 11:40:27 +00:00
ti,hwmods = "mmc2";
ti,needs-special-reset;
};
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x480ad000 0x400>;
interrupts = <0 94 0x4>;
arm/dts: OMAP4: Add mmc controller nodes and board data Add OMAP mmc related device tree data for OMAP4. Currenly limited to only omap4-panda and omap4-sdp boards. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2011-10-04 11:40:27 +00:00
ti,hwmods = "mmc3";
ti,needs-special-reset;
};
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x480d1000 0x400>;
interrupts = <0 96 0x4>;
arm/dts: OMAP4: Add mmc controller nodes and board data Add OMAP mmc related device tree data for OMAP4. Currenly limited to only omap4-panda and omap4-sdp boards. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2011-10-04 11:40:27 +00:00
ti,hwmods = "mmc4";
ti,needs-special-reset;
};
mmc5: mmc@480d5000 {
compatible = "ti,omap4-hsmmc";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x480d5000 0x400>;
interrupts = <0 59 0x4>;
arm/dts: OMAP4: Add mmc controller nodes and board data Add OMAP mmc related device tree data for OMAP4. Currenly limited to only omap4-panda and omap4-sdp boards. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2011-10-04 11:40:27 +00:00
ti,hwmods = "mmc5";
ti,needs-special-reset;
};
arm/dts: add wdt node for omap3 and omap4 Add wdt node to support dt. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-01 04:44:14 +00:00
wdt2: wdt@4a314000 {
compatible = "ti,omap4-wdt", "ti,omap3-wdt";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4a314000 0x80>;
interrupts = <0 80 0x4>;
arm/dts: add wdt node for omap3 and omap4 Add wdt node to support dt. Signed-off-by: Xiao Jiang <jgq516@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-01 04:44:14 +00:00
ti,hwmods = "wd_timer2";
};
arm/dts: omap4: Add entry for OMAP McPDM IP McPDM is used on OMAP4 based boards to communicate with an external audio codec (twl6040). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-08 14:01:59 +00:00
mcpdm: mcpdm@40132000 {
compatible = "ti,omap4-mcpdm";
reg = <0x40132000 0x7f>, /* MPU private access */
<0x49032000 0x7f>; /* L3 Interconnect */
ARM: dts: omap4: Add reg-names for McPDM and DMIC In order to get the memory areas by name when booted with DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-08-29 13:31:06 +00:00
reg-names = "mpu", "dma";
arm/dts: omap4: Add entry for OMAP McPDM IP McPDM is used on OMAP4 based boards to communicate with an external audio codec (twl6040). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-08 14:01:59 +00:00
interrupts = <0 112 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "mcpdm";
};
arm/dts: omap4: Add entry for OMAP DMIC IP DMIC IP is used to connect up to 6 digital microphones directly to OMAP. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-08 14:02:00 +00:00
dmic: dmic@4012e000 {
compatible = "ti,omap4-dmic";
reg = <0x4012e000 0x7f>, /* MPU private access */
<0x4902e000 0x7f>; /* L3 Interconnect */
ARM: dts: omap4: Add reg-names for McPDM and DMIC In order to get the memory areas by name when booted with DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-08-29 13:31:06 +00:00
reg-names = "mpu", "dma";
arm/dts: omap4: Add entry for OMAP DMIC IP DMIC IP is used to connect up to 6 digital microphones directly to OMAP. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-06-08 14:02:00 +00:00
interrupts = <0 114 0x4>;
interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};
ARM: dts: omap4-sdp: Add keypad data Add keypad data node in omap4 device tree file. Also fill the device tree binding parameters with the required value in "omap4-sdp" dts file. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> [b-cousson@ti.com: Re-align the entries and the comments]
2012-08-14 11:15:37 +00:00
ARM: dts: omap4: Add McBSP entries Create the sections describing the McBSP ports to be able to use them via DT. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-07-26 14:13:21 +00:00
mcbsp1: mcbsp@40122000 {
compatible = "ti,omap4-mcbsp";
reg = <0x40122000 0xff>, /* MPU private access */
<0x49022000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
interrupts = <0 17 0x4>;
interrupt-names = "common";
interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp1";
};
mcbsp2: mcbsp@40124000 {
compatible = "ti,omap4-mcbsp";
reg = <0x40124000 0xff>, /* MPU private access */
<0x49024000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
interrupts = <0 22 0x4>;
interrupt-names = "common";
interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp2";
};
mcbsp3: mcbsp@40126000 {
compatible = "ti,omap4-mcbsp";
reg = <0x40126000 0xff>, /* MPU private access */
<0x49026000 0xff>; /* L3 Interconnect */
reg-names = "mpu", "dma";
interrupts = <0 23 0x4>;
interrupt-names = "common";
interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp3";
};
mcbsp4: mcbsp@48096000 {
compatible = "ti,omap4-mcbsp";
reg = <0x48096000 0xff>; /* L4 Interconnect */
reg-names = "mpu";
interrupts = <0 16 0x4>;
interrupt-names = "common";
interrupt-parent = <&gic>;
ti,buffer-size = <128>;
ti,hwmods = "mcbsp4";
};
ARM: dts: omap4-sdp: Add keypad data Add keypad data node in omap4 device tree file. Also fill the device tree binding parameters with the required value in "omap4-sdp" dts file. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> [b-cousson@ti.com: Re-align the entries and the comments]
2012-08-14 11:15:37 +00:00
keypad: keypad@4a31c000 {
compatible = "ti,omap4-keypad";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4a31c000 0x80>;
interrupts = <0 120 0x4>;
reg-names = "mpu";
ARM: dts: omap4-sdp: Add keypad data Add keypad data node in omap4 device tree file. Also fill the device tree binding parameters with the required value in "omap4-sdp" dts file. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> [b-cousson@ti.com: Re-align the entries and the comments]
2012-08-14 11:15:37 +00:00
ti,hwmods = "kbd";
};
ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boards Device tree data for the EMIF sdram controllers in OMAP4 and LPDDR2 memory devices attached to OMAP4 boards. Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Aneesh V <aneesh@ti.com> [santosh.shilimkar@ti.com: Rebased against 3.6-rc] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [b-cousson@ti.com: Use label in board to access EMIF nodes] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-01-20 15:05:26 +00:00
emif1: emif@4c000000 {
compatible = "ti,emif-4d";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4c000000 0x100>;
interrupts = <0 110 0x4>;
ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boards Device tree data for the EMIF sdram controllers in OMAP4 and LPDDR2 memory devices attached to OMAP4 boards. Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Aneesh V <aneesh@ti.com> [santosh.shilimkar@ti.com: Rebased against 3.6-rc] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [b-cousson@ti.com: Use label in board to access EMIF nodes] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-01-20 15:05:26 +00:00
ti,hwmods = "emif1";
phy-type = <1>;
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
hw-caps-temp-alert;
};
emif2: emif@4d000000 {
compatible = "ti,emif-4d";
ARM: dts: OMAP4: Add reg and interrupts for every nodes Thanks to Vaibhav <hvaibhav@ti.com> omap_device fix (ARM: OMAP: omap_device: Fix up resource names when booted with devicetre), we can now specify reg and interrupts using standard device tree attributes. Update the OMAP4 dtsi file with missing reg and interrupts attributes. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-09-05 09:38:23 +00:00
reg = <0x4d000000 0x100>;
interrupts = <0 111 0x4>;
ARM: dts: EMIF and LPDDR2 device tree data for OMAP4 boards Device tree data for the EMIF sdram controllers in OMAP4 and LPDDR2 memory devices attached to OMAP4 boards. Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Aneesh V <aneesh@ti.com> [santosh.shilimkar@ti.com: Rebased against 3.6-rc] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> [b-cousson@ti.com: Use label in board to access EMIF nodes] Signed-off-by: Benoit Cousson <b-cousson@ti.com>
2012-01-20 15:05:26 +00:00
ti,hwmods = "emif2";
phy-type = <1>;
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
hw-caps-temp-alert;
};
ARM: soc: driver specific changes - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQaO48AAoJEIwa5zzehBx3excP/ieEkRhvfnWxdYST6ekvGIQr nEyskOh2rVjgYKmSXUJyKSbvG+7bZ8VIxvPvojeAJ/R84pTFMzbR2F0CaPKzAuSW inDt6c0Bnx1NZlfUTAoXcz7feyq9zHYNs9BCLoPU0bYNchCCqcWSKzqnpXk2ph/P LFnmNa0j6a4E3QJYAjM2zFvc3Tgk+MWTq1fWwNFvsWTh2WbQtmB/iGnzT5Xs4XQh u1SSx5tz0lcF5zQRGmJhXgL5+nnIP4sRwRUBAkpe3Gv5cM6WBVEBRDANa5QpbUL2 RXK5YyCTIln2Me4bPk32zEBLjiZ/WXbmiA2uwoqVgy6XToubemDXd0PtKmjj5tZ1 BkTD1DND7BKBEQnJj/GBECEdvx2FbrKfruoPcJHvXPZ7Svn5Dt/MWYJQIkRFkuhL zlVNoDGWlU8nScGrgmTM56UvWmGWC3UFsWSgdVQNfW9yEva+G1FvRUwUH02Ip5Ad 4r28JFIn6zyjtM99ZHipU6C6Rze2ordC7fl5X5LBLkVOobioblxCAhIhcqkhfKsk rFriNsdfYs7SrJA7mK7GzvaMEJgp/5o1noJKXI7ZBcLI8yYagzbQbPu/vGi6G6d3 0xC7NaTEJbtoXoDAtmtilLRxmw0YCXgVBBGua0K2YKpcRwnzCHNbV4gsLMnDuOXS HP4M96LxLHJlLGCxhEme =ck7M -----END PGP SIGNATURE----- Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
2012-10-02 01:46:13 +00:00
arm/dts: omap4: Add ocp2scp data Add ocp2scp data node in omap4 device tree file. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-08-22 08:40:03 +00:00
ocp2scp {
compatible = "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "ocp2scp_usb_phy";
};
arm/dts: Add initial device tree support for OMAP4 SoC Add initial device-tree support for OMAP4 SoC. This is based on the original panda board patch done by Manju: http://permalink.gmane.org/gmane.linux.ports.arm.omap/60393 Add the generic GIC interrupt-controller from ARM. Add an empty "soc" node to contain non memory mapped IPs (DSP, MPU, IPU...). Note: Since reg, irq and dma are provided by hwmod for the moment, these attributes will not be present at all in DTS to highlight the gap. They will be added as soon as dma bindings will be there and drivers will be adapted. Signed-off-by: Benoit Cousson <b-cousson@ti.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: G, Manjunath Kondaiah <manjugk@ti.com>
2011-08-09 15:15:17 +00:00
};
};
Reference in New Issue Copy Permalink