linux/arch/openrisc/mm/fault.c

351 lines
8.5 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* OpenRISC fault.c
*
* Linux architectural port borrowing liberally from similar works of
* others. All original copyrights apply as per the original source
* declaration.
*
* Modifications for the OpenRISC architecture:
* Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
* Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
*/
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/extable.h>
#include <linux/sched/signal.h>
#include <linux/uaccess.h>
#include <asm/siginfo.h>
#include <asm/signal.h>
#define NUM_TLB_ENTRIES 64
#define TLB_OFFSET(add) (((add) >> PAGE_SHIFT) & (NUM_TLB_ENTRIES-1))
unsigned long pte_misses; /* updated by do_page_fault() */
unsigned long pte_errors; /* updated by do_page_fault() */
/* __PHX__ :: - check the vmalloc_fault in do_page_fault()
* - also look into include/asm-or32/mmu_context.h
*/
openrisc: initial SMP support This patch introduces the SMP support for the OpenRISC architecture. The SMP architecture requires cores which have multi-core features which have been introduced a few years back including: - New SPRS SPR_COREID SPR_NUMCORES - Shadow SPRs - Atomic Instructions - Cache Coherency - A wired in IPI controller This patch adds all of the SMP specific changes to core infrastructure, it looks big but it needs to go all together as its hard to split this one up. Boot loader spinning of second cpu is not supported yet, it's assumed that Linux is booted straight after cpu reset. The bulk of these changes are trivial changes to refactor to use per cpu data structures throughout. The addition of the smp.c and changes in time.c are the changes. Some specific notes: MM changes ---------- The reason why this is created as an array, and not with DEFINE_PER_CPU is that doing it this way, we'll save a load in the tlb-miss handler (the load from __per_cpu_offset). TLB Flush --------- The SMP implementation of flush_tlb_* works by sending out a function-call IPI to all the non-local cpus by using the generic on_each_cpu() function. Currently, all flush_tlb_* functions will result in a flush_tlb_all(), which has always been the behaviour in the UP case. CPU INFO -------- This creates a per cpu cpuinfo struct and fills it out accordingly for each activated cpu. show_cpuinfo is also updated to reflect new version information in later versions of the spec. SMP API ------- This imitates the arm64 implementation by having a smp_cross_call callback that can be set by set_smp_cross_call to initiate an IPI and a handle_IPI function that is expected to be called from an IPI irqchip driver. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: added cpu stop, checkpatch fixes, wrote commit message] Signed-off-by: Stafford Horne <shorne@gmail.com>
2014-05-11 18:49:34 +00:00
volatile pgd_t *current_pgd[NR_CPUS];
extern void die(char *, struct pt_regs *, long);
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
* routines.
*
* If this routine detects a bad access, it returns 1, otherwise it
* returns 0.
*/
asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long address,
unsigned long vector, int write_acc)
{
struct task_struct *tsk;
struct mm_struct *mm;
struct vm_area_struct *vma;
int si_code;
mm: convert return type of handle_mm_fault() caller to vm_fault_t Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") In this patch all the caller of handle_mm_fault() are changed to return vm_fault_t type. Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Tony Luck <tony.luck@intel.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: James Hogan <jhogan@kernel.org> Cc: Ley Foon Tan <lftan@altera.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: David S. Miller <davem@davemloft.net> Cc: Richard Weinberger <richard@nod.at> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:44:47 +00:00
vm_fault_t fault;
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
tsk = current;
/*
* We fault-in kernel-space virtual memory on-demand. The
* 'reference' page table is init_mm.pgd.
*
* NOTE! We MUST NOT take any locks for this case. We may
* be in an interrupt or a critical region, and should
* only copy the information from the master page table,
* nothing more.
*
* NOTE2: This is done so that, when updating the vmalloc
* mappings we don't have to walk all processes pgdirs and
* add the high mappings all at once. Instead we do it as they
* are used. However vmalloc'ed page entries have the PAGE_GLOBAL
* bit set so sometimes the TLB can use a lingering entry.
*
* This verifies that the fault happens in kernel space
* and that the fault was not a protection error.
*/
if (address >= VMALLOC_START &&
(vector != 0x300 && vector != 0x400) &&
!user_mode(regs))
goto vmalloc_fault;
/* If exceptions were enabled, we can reenable them here */
if (user_mode(regs)) {
/* Exception was in userspace: reenable interrupts */
local_irq_enable();
flags |= FAULT_FLAG_USER;
} else {
/* If exception was in a syscall, then IRQ's may have
* been enabled or disabled. If they were enabled,
* reenable them.
*/
if (regs->sr && (SPR_SR_IEE | SPR_SR_TEE))
local_irq_enable();
}
mm = tsk->mm;
si_code = SEGV_MAPERR;
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
if (in_interrupt() || !mm)
goto no_context;
retry:
down_read(&mm->mmap_sem);
vma = find_vma(mm, address);
if (!vma)
goto bad_area;
if (vma->vm_start <= address)
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto bad_area;
if (user_mode(regs)) {
/*
* accessing the stack below usp is always a bug.
* we get page-aligned addresses so we can only check
* if we're within a page from usp, but that might be
* enough to catch brutal errors at least.
*/
if (address + PAGE_SIZE < regs->sp)
goto bad_area;
}
if (expand_stack(vma, address))
goto bad_area;
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
good_area:
si_code = SEGV_ACCERR;
/* first do some preliminary protection checks */
if (write_acc) {
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
flags |= FAULT_FLAG_WRITE;
} else {
/* not present */
if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
goto bad_area;
}
/* are we trying to execute nonexecutable area */
if ((vector == 0x400) && !(vma->vm_page_prot.pgprot & _PAGE_EXEC))
goto bad_area;
/*
* If for any reason at all we couldn't handle the fault,
* make sure we exit gracefully rather than endlessly redo
* the fault.
*/
fault = handle_mm_fault(vma, address, flags);
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
return;
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
vm: add VM_FAULT_SIGSEGV handling support The core VM already knows about VM_FAULT_SIGBUS, but cannot return a "you should SIGSEGV" error, because the SIGSEGV case was generally handled by the caller - usually the architecture fault handler. That results in lots of duplication - all the architecture fault handlers end up doing very similar "look up vma, check permissions, do retries etc" - but it generally works. However, there are cases where the VM actually wants to SIGSEGV, and applications _expect_ SIGSEGV. In particular, when accessing the stack guard page, libsigsegv expects a SIGSEGV. And it usually got one, because the stack growth is handled by that duplicated architecture fault handler. However, when the generic VM layer started propagating the error return from the stack expansion in commit fee7e49d4514 ("mm: propagate error from stack expansion even for guard page"), that now exposed the existing VM_FAULT_SIGBUS result to user space. And user space really expected SIGSEGV, not SIGBUS. To fix that case, we need to add a VM_FAULT_SIGSEGV, and teach all those duplicate architecture fault handlers about it. They all already have the code to handle SIGSEGV, so it's about just tying that new return value to the existing code, but it's all a bit annoying. This is the mindless minimal patch to do this. A more extensive patch would be to try to gather up the mostly shared fault handling logic into one generic helper routine, and long-term we really should do that cleanup. Just from this patch, you can generally see that most architectures just copied (directly or indirectly) the old x86 way of doing things, but in the meantime that original x86 model has been improved to hold the VM semaphore for shorter times etc and to handle VM_FAULT_RETRY and other "newer" things, so it would be a good idea to bring all those improvements to the generic case and teach other architectures about them too. Reported-and-tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Jan Engelhardt <jengelh@inai.de> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # "s390 still compiles and boots" Cc: linux-arch@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-01-29 18:51:32 +00:00
else if (fault & VM_FAULT_SIGSEGV)
goto bad_area;
else if (fault & VM_FAULT_SIGBUS)
goto do_sigbus;
BUG();
}
if (flags & FAULT_FLAG_ALLOW_RETRY) {
/*RGD modeled on Cris */
if (fault & VM_FAULT_MAJOR)
tsk->maj_flt++;
else
tsk->min_flt++;
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
flags |= FAULT_FLAG_TRIED;
/* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
up_read(&mm->mmap_sem);
return;
/*
* Something tried to access memory that isn't in our memory map..
* Fix it, but check if it's kernel or user first..
*/
bad_area:
up_read(&mm->mmap_sem);
bad_area_nosemaphore:
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) {
force_sig_fault(SIGSEGV, si_code, (void __user *)address);
return;
}
no_context:
/* Are we prepared to handle this kernel fault?
*
* (The kernel has valid exception-points in the source
* when it acesses user-memory. When it fails in one
* of those points, we find it in a table and do a jump
* to some fixup code that loads an appropriate error
* code)
*/
{
const struct exception_table_entry *entry;
__asm__ __volatile__("l.nop 42");
if ((entry = search_exception_tables(regs->pc)) != NULL) {
/* Adjust the instruction pointer in the stackframe */
regs->pc = entry->fixup;
return;
}
}
/*
* Oops. The kernel tried to access some bad page. We'll have to
* terminate things with extreme prejudice.
*/
if ((unsigned long)(address) < PAGE_SIZE)
printk(KERN_ALERT
"Unable to handle kernel NULL pointer dereference");
else
printk(KERN_ALERT "Unable to handle kernel access");
printk(" at virtual address 0x%08lx\n", address);
die("Oops", regs, write_acc);
do_exit(SIGKILL);
/*
* We ran out of memory, or some other thing happened to us that made
* us unable to handle the page fault gracefully.
*/
out_of_memory:
__asm__ __volatile__("l.nop 42");
__asm__ __volatile__("l.nop 1");
up_read(&mm->mmap_sem);
if (!user_mode(regs))
goto no_context;
pagefault_out_of_memory();
return;
do_sigbus:
up_read(&mm->mmap_sem);
/*
* Send a sigbus, regardless of whether we were in kernel
* or user mode.
*/
force_sig_fault(SIGBUS, BUS_ADRERR, (void __user *)address);
/* Kernel mode? Handle exceptions or die */
if (!user_mode(regs))
goto no_context;
return;
vmalloc_fault:
{
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
*
* Use current_pgd instead of tsk->active_mm->pgd
* since the latter might be unavailable if this
* code is executed in a misfortunately run irq
* (like inside schedule() between switch_mm and
* switch_to...).
*/
int offset = pgd_index(address);
pgd_t *pgd, *pgd_k;
pud_t *pud, *pud_k;
pmd_t *pmd, *pmd_k;
pte_t *pte_k;
/*
phx_warn("do_page_fault(): vmalloc_fault will not work, "
"since current_pgd assign a proper value somewhere\n"
"anyhow we don't need this at the moment\n");
phx_mmu("vmalloc_fault");
*/
openrisc: initial SMP support This patch introduces the SMP support for the OpenRISC architecture. The SMP architecture requires cores which have multi-core features which have been introduced a few years back including: - New SPRS SPR_COREID SPR_NUMCORES - Shadow SPRs - Atomic Instructions - Cache Coherency - A wired in IPI controller This patch adds all of the SMP specific changes to core infrastructure, it looks big but it needs to go all together as its hard to split this one up. Boot loader spinning of second cpu is not supported yet, it's assumed that Linux is booted straight after cpu reset. The bulk of these changes are trivial changes to refactor to use per cpu data structures throughout. The addition of the smp.c and changes in time.c are the changes. Some specific notes: MM changes ---------- The reason why this is created as an array, and not with DEFINE_PER_CPU is that doing it this way, we'll save a load in the tlb-miss handler (the load from __per_cpu_offset). TLB Flush --------- The SMP implementation of flush_tlb_* works by sending out a function-call IPI to all the non-local cpus by using the generic on_each_cpu() function. Currently, all flush_tlb_* functions will result in a flush_tlb_all(), which has always been the behaviour in the UP case. CPU INFO -------- This creates a per cpu cpuinfo struct and fills it out accordingly for each activated cpu. show_cpuinfo is also updated to reflect new version information in later versions of the spec. SMP API ------- This imitates the arm64 implementation by having a smp_cross_call callback that can be set by set_smp_cross_call to initiate an IPI and a handle_IPI function that is expected to be called from an IPI irqchip driver. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: added cpu stop, checkpatch fixes, wrote commit message] Signed-off-by: Stafford Horne <shorne@gmail.com>
2014-05-11 18:49:34 +00:00
pgd = (pgd_t *)current_pgd[smp_processor_id()] + offset;
pgd_k = init_mm.pgd + offset;
/* Since we're two-level, we don't need to do both
* set_pgd and set_pmd (they do the same thing). If
* we go three-level at some point, do the right thing
* with pgd_present and set_pgd here.
*
* Also, since the vmalloc area is global, we don't
* need to copy individual PTE's, it is enough to
* copy the pgd pointer into the pte page of the
* root task. If that is there, we'll find our pte if
* it exists.
*/
pud = pud_offset(pgd, address);
pud_k = pud_offset(pgd_k, address);
if (!pud_present(*pud_k))
goto no_context;
pmd = pmd_offset(pud, address);
pmd_k = pmd_offset(pud_k, address);
if (!pmd_present(*pmd_k))
goto bad_area_nosemaphore;
set_pmd(pmd, *pmd_k);
/* Make sure the actual PTE exists as well to
* catch kernel vmalloc-area accesses to non-mapped
* addresses. If we don't do this, this will just
* silently loop forever.
*/
pte_k = pte_offset_kernel(pmd_k, address);
if (!pte_present(*pte_k))
goto no_context;
return;
}
}