linux/drivers/gpu/drm/omapdrm/omap_encoder.c

194 lines
5.0 KiB
C
Raw Normal View History

staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
/*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
* Author: Rob Clark <rob@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/list.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_edid.h>
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
#include "omap_drv.h"
/*
* encoder funcs
*/
#define to_omap_encoder(x) container_of(x, struct omap_encoder, base)
/* The encoder and connector both map to same dssdev.. the encoder
* handles the 'active' parts, ie. anything the modifies the state
* of the hw, and the connector handles the 'read-only' parts, like
* detecting connection and reading edid.
*/
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
struct omap_encoder {
struct drm_encoder base;
struct omap_dss_device *dssdev;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
};
drm/omap: Fix and improve crtc and overlay manager correlation The omapdrm driver currently takes a config/module arg to figure out the number of crtcs it needs to create. We could create as many crtcs as there are overlay managers in the DSS hardware, but we don't do that because each crtc eats up one DSS overlay, and that reduces the number of planes we can attach to a single crtc. Since the number of crtcs may be lesser than the number of hardware overlay managers, we need to figure out which overlay managers to use for our crtcs. The current approach is to use pipe2chan(), which returns a higher numbered manager for the crtc. The problem with this approach is that it assumes that the overlay managers we choose will connect to the encoders the platform's panels are going to use, this isn't true, an overlay manager connects only to a few outputs/encoders, and choosing any overlay manager for our crtc might lead to a situation where the encoder cannot connect to any of the crtcs we have chosen. For example, an omap5-panda board has just one hdmi output. If num_crtc is set to 1, with the current approach, pipe2chan will pick up the LCD2 overlay manager, which cannot connect to the hdmi encoder at all. The only manager that could have connected to hdmi was the TV overlay manager. Therefore, there is a need to choose our overlay managers keeping in mind the panels we have on that platform. The new approach iterates through all the available panels, creates encoders and connectors for them, and then tries to get a suitable overlay manager to create a crtc which can connect to the encoders. We use the dispc_channel field in omap_dss_output to retrieve the desired overlay manager's channel number, we then check whether the manager had already been assigned to a crtc or not. If it was already assigned to a crtc, we assume that out of all the encoders which intend use this crtc, only one will run at a time. If the overlay manager wan't assigned to a crtc till then, we create a new crtc and link it with the overlay manager. This approach just looks for the best dispc_channel for each encoder. On DSS HW, some encoders can connect to multiple overlay managers. Since we don't try looking for alternate overlay managers, there is a greater possibility that 2 or more encoders end up asking for the same crtc, causing only one encoder to run at a time. Also, this approach isn't the most optimal one, it can do either good or bad depending on the sequence in which the panels/outputs are parsed. The optimal way would be some sort of back tracking approach, where we improve the set of managers we use as we iterate through the list of panels/encoders. That's something left for later. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-03-26 13:45:19 +00:00
struct omap_dss_device *omap_encoder_get_dssdev(struct drm_encoder *encoder)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
return omap_encoder->dssdev;
}
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
static void omap_encoder_destroy(struct drm_encoder *encoder)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
drm_encoder_cleanup(encoder);
kfree(omap_encoder);
}
static const struct drm_encoder_funcs omap_encoder_funcs = {
.destroy = omap_encoder_destroy,
};
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
static void omap_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct drm_device *dev = encoder->dev;
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
struct omap_dss_device *dssdev = omap_encoder->dssdev;
struct drm_connector *connector;
bool hdmi_mode;
int r;
hdmi_mode = false;
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
if (connector->encoder == encoder) {
hdmi_mode = omap_connector_get_hdmi_mode(connector);
break;
}
}
if (dssdev->driver->set_hdmi_mode)
dssdev->driver->set_hdmi_mode(dssdev, hdmi_mode);
if (hdmi_mode && dssdev->driver->set_hdmi_infoframe) {
struct hdmi_avi_infoframe avi;
drm: handle HDMI 2.0 VICs in AVI info-frames HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64). For any other mode, the VIC filed in AVI infoframes should be 0. HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is extended to (VIC 1-107). This patch adds a bool input variable, which indicates if the connected sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a HDMI 2.0 VIC to a HDMI 1.4 sink. This patch touches all drm drivers, who are callers of this function drm_hdmi_avi_infoframe_from_display_mode but to make sure there is no change in current behavior, is_hdmi2 is kept as false. In case of I915 driver, this patch: - checks if the connected display is HDMI 2.0. - HDMI infoframes carry one of this two type of information: - VIC for 4K modes for HDMI 1.4 sinks - S3D information for S3D modes As CEA-861-F has already defined VICs for 4K videomodes, this patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks, until the mode is 3D. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> PS: This patch touches a few lines in few files, which were already above 80 char, so checkpatch gives 80 char warning again. - gpu/drm/omapdrm/omap_encoder.c - gpu/drm/i915/intel_sdvo.c V2: Rebase, Added r-b from Andrzej V3: Addressed review comment from Ville: - Do not send VICs in both AVI-IF and HDMI-IF send only one of it. V4: Rebase V5: Added r-b from Neil. Addressed review comments from Ville - Do not block HDMI vendor IF, instead check for VIC while handling AVI infoframes V6: Rebase V7: Rebase Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-13 15:33:07 +00:00
r = drm_hdmi_avi_infoframe_from_display_mode(&avi, adjusted_mode,
false);
if (r == 0)
dssdev->driver->set_hdmi_infoframe(dssdev, &avi);
}
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
}
static void omap_encoder_disable(struct drm_encoder *encoder)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
struct omap_dss_device *dssdev = omap_encoder->dssdev;
const struct omap_dss_driver *dssdrv = dssdev->driver;
dssdrv->disable(dssdev);
}
static int omap_encoder_update(struct drm_encoder *encoder,
enum omap_channel channel,
struct videomode *vm)
{
struct drm_device *dev = encoder->dev;
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
struct omap_dss_device *dssdev = omap_encoder->dssdev;
const struct omap_dss_driver *dssdrv = dssdev->driver;
int ret;
if (dssdrv->check_timings) {
ret = dssdrv->check_timings(dssdev, vm);
} else {
struct videomode t = {0};
dssdrv->get_timings(dssdev, &t);
if (memcmp(vm, &t, sizeof(*vm)))
ret = -EINVAL;
else
ret = 0;
}
if (ret) {
dev_err(dev->dev, "could not set timings: %d\n", ret);
return ret;
}
if (dssdrv->set_timings)
dssdrv->set_timings(dssdev, vm);
return 0;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
}
static void omap_encoder_enable(struct drm_encoder *encoder)
{
struct omap_encoder *omap_encoder = to_omap_encoder(encoder);
struct omap_dss_device *dssdev = omap_encoder->dssdev;
const struct omap_dss_driver *dssdrv = dssdev->driver;
int r;
omap_encoder_update(encoder, omap_crtc_channel(encoder->crtc),
omap_crtc_timings(encoder->crtc));
r = dssdrv->enable(dssdev);
if (r)
dev_err(encoder->dev->dev,
"Failed to enable display '%s': %d\n",
dssdev->name, r);
}
static int omap_encoder_atomic_check(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
return 0;
}
static const struct drm_encoder_helper_funcs omap_encoder_helper_funcs = {
.mode_set = omap_encoder_mode_set,
.disable = omap_encoder_disable,
.enable = omap_encoder_enable,
.atomic_check = omap_encoder_atomic_check,
};
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
/* initialize encoder */
struct drm_encoder *omap_encoder_init(struct drm_device *dev,
struct omap_dss_device *dssdev)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
{
struct drm_encoder *encoder = NULL;
struct omap_encoder *omap_encoder;
omap_encoder = kzalloc(sizeof(*omap_encoder), GFP_KERNEL);
if (!omap_encoder)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
goto fail;
omap_encoder->dssdev = dssdev;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
encoder = &omap_encoder->base;
drm_encoder_init(dev, encoder, &omap_encoder_funcs,
DRM_MODE_ENCODER_TMDS, NULL);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
drm_encoder_helper_add(encoder, &omap_encoder_helper_funcs);
return encoder;
fail:
if (encoder)
omap_encoder_destroy(encoder);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-12 18:09:40 +00:00
return NULL;
}