leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e7d08bcfe9
linux/arch/arm/include/asm/mmu.h

41 lines
694 B
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifndef __ARM_MMU_H
#define __ARM_MMU_H
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:46:52 +00:00
#ifdef CONFIG_MMU
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
typedef struct {
[ARM] ARMv6: add CPU_HAS_ASID configuration Presently, we check for the minimum ARM architecture that we're building for to determine whether we need ASID support. This is wrong - if we're going to support a range of CPUs which include ARMv6 or higher, we need the ASID. Convert the checks to use a new configuration symbol, and arrange for ARMv6 and higher CPU entries to select it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-17 09:19:23 +00:00
#ifdef CONFIG_CPU_HAS_ASID
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-28 16:47:36 +00:00
atomic64_t id;
ARM: 7790/1: Fix deferred mm switch on VIVT processors As of commit b9d4d42ad9 (ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on pre-ARMv6 CPUs), the mm switching on VIVT processors is done in the finish_arch_post_lock_switch() function to avoid whole cache flushing with interrupts disabled. The need for deferred mm switch is stored as a thread flag (TIF_SWITCH_MM). However, with preemption enabled, we can have another thread switch before finish_arch_post_lock_switch(). If the new thread has the same mm as the previous 'next' thread, the scheduler will not call switch_mm() and the TIF_SWITCH_MM flag won't be set for the new thread. This patch moves the switch pending flag to the mm_context_t structure since this is specific to the mm rather than thread. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Tested-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: <stable@vger.kernel.org> # 3.5+ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-23 15:15:36 +00:00
#else
int switch_pending;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-28 16:47:36 +00:00
unsigned int vmalloc_seq;
ARM: move signal handlers into a vdso-like page Move the signal handlers into a VDSO page rather than keeping them in the vectors page. This allows us to place them randomly within this page, and also map the page at a random location within userspace further protecting these code fragments from ROP attacks. The new VDSO page is also poisoned in the same way as the vector page. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-07-23 23:29:18 +00:00
unsigned long sigpage;
ARM: 8329/1: miscellaneous vdso infrastructure, preparation Define the layout of the data structure shared between kernel and userspace. Track the vdso address in the mm_context; needed for communicating AT_SYSINFO_EHDR to the ELF loader. Add declarations for arm_install_vdso; implementation is in a following patch. Define AT_SYSINFO_EHDR, and, if CONFIG_VDSO=y, report the vdso shared object address via the ELF auxiliary vector. Note - this adds the AT_SYSINFO_EHDR in a new user-visible header asm/auxvec.h; this is consistent with other architectures. Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-25 18:13:16 +00:00
#ifdef CONFIG_VDSO
unsigned long vdso;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} mm_context_t;
[ARM] ARMv6: add CPU_HAS_ASID configuration Presently, we check for the minimum ARM architecture that we're building for to determine whether we need ASID support. This is wrong - if we're going to support a range of CPUs which include ARMv6 or higher, we need the ASID. Convert the checks to use a new configuration symbol, and arrange for ARMv6 and higher CPU entries to select it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-17 09:19:23 +00:00
#ifdef CONFIG_CPU_HAS_ASID
ARM: mm: remove IPI broadcasting on ASID rollover ASIDs are allocated to MMU contexts based on a rolling counter. This means that after 255 allocations we must invalidate all existing ASIDs via an expensive IPI mechanism to synchronise all of the online CPUs and ensure that all tasks execute with an ASID from the new generation. This patch changes the rollover behaviour so that we rely instead on the hardware broadcasting of the TLB invalidation to avoid the IPI calls. This works by keeping track of the active ASID on each core, which is then reserved in the case of a rollover so that currently scheduled tasks can continue to run. For cores without hardware TLB broadcasting, we keep track of pending flushes in a cpumask, so cores can flush their local TLB before scheduling a new mm. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2012-06-15 13:47:31 +00:00
#define ASID_BITS 8
#define ASID_MASK ((~0ULL) << ASID_BITS)
ARM: tlb: ASID macro should give 32bit result for BE correct operation In order for ASID macro to be used as expression passed to inline asm as 'r' operand it needs to give 32 bit unsigned result, not unsigned 64bit expression. Otherwise when 64bit ASID is passed to inline assembler statement as 'r' operand (32bit) compiler behavior is not well specified. For example when __flush_tlb_mm function compiled in big endian case, and ASID is passed to tlb_op macro directly, 0 will be passed as 'mcr 15, 0, r4, cr8, cr3, {2}' argument in r4, unless ASID macro changed to produce 32 bit result. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
2013-10-07 15:48:23 +00:00
#define ASID(mm) ((unsigned int)((mm)->context.id.counter & ~ASID_MASK))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#else
#define ASID(mm) (0)
#endif
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:46:52 +00:00
#else
/*
* From nommu.h:
* Copyright (C) 2002, David McCullough <davidm@snapgear.com>
* modified for 2.6 by Hyok S. Choi <hyok.choi@samsung.com>
*/
typedef struct {
ARM: 7659/1: mm: make mm->context.id an atomic64_t variable mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Cc: <stable@vger.kernel.org> # 3.8 Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-02-28 16:47:36 +00:00
unsigned long end_brk;
[ARM] nommu: adjust headers for !MMU ARM systems Majorily based on Hyok Choi's patches, this fixes up the asm-arm header files for mmuless systems. Over and above Hyok's patches: - nommu.h merged into mmu.h (it's only a structure) - nommu_context.h is essentially the same as mmu_context.h, but without the MM switching code. so there's no point having separate files. Also, in memory.h, there's no point #ifndef'ing PHYS_OFFSET and END_MEM - both CONFIG_DRAM_BASE and CONFIG_DRAM_SIZE will always be set by the configuration scripts. Other files have minor formatting changes, but are essentially the same. Hyok's original patches were signed off thusly: Signed-off-by: Hyok S. Choi <hyok.choi@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 19:46:52 +00:00
} mm_context_t;
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#endif
Reference in New Issue Copy Permalink