2015-11-30 01:44:30 +00:00
|
|
|
/*
|
|
|
|
* Renesas R-Car Gen3 for USB2.0 PHY driver
|
|
|
|
*
|
|
|
|
* Copyright (C) 2015 Renesas Electronics Corporation
|
|
|
|
*
|
|
|
|
* This is based on the phy-rcar-gen2 driver:
|
|
|
|
* Copyright (C) 2014 Renesas Solutions Corp.
|
|
|
|
* Copyright (C) 2014 Cogent Embedded, Inc.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
2016-04-29 08:52:25 +00:00
|
|
|
#include <linux/extcon.h>
|
2015-11-30 01:44:32 +00:00
|
|
|
#include <linux/interrupt.h>
|
2015-11-30 01:44:30 +00:00
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_address.h>
|
|
|
|
#include <linux/phy/phy.h>
|
|
|
|
#include <linux/platform_device.h>
|
2016-03-03 10:09:05 +00:00
|
|
|
#include <linux/regulator/consumer.h>
|
2016-06-27 06:36:53 +00:00
|
|
|
#include <linux/workqueue.h>
|
2015-11-30 01:44:30 +00:00
|
|
|
|
|
|
|
/******* USB2.0 Host registers (original offset is +0x200) *******/
|
|
|
|
#define USB2_INT_ENABLE 0x000
|
|
|
|
#define USB2_USBCTR 0x00c
|
|
|
|
#define USB2_SPD_RSM_TIMSET 0x10c
|
|
|
|
#define USB2_OC_TIMSET 0x110
|
2015-11-30 01:44:31 +00:00
|
|
|
#define USB2_COMMCTRL 0x600
|
2015-11-30 01:44:32 +00:00
|
|
|
#define USB2_OBINTSTA 0x604
|
|
|
|
#define USB2_OBINTEN 0x608
|
2015-11-30 01:44:31 +00:00
|
|
|
#define USB2_VBCTRL 0x60c
|
|
|
|
#define USB2_LINECTRL1 0x610
|
|
|
|
#define USB2_ADPCTRL 0x630
|
2015-11-30 01:44:30 +00:00
|
|
|
|
|
|
|
/* INT_ENABLE */
|
2015-11-30 01:44:32 +00:00
|
|
|
#define USB2_INT_ENABLE_UCOM_INTEN BIT(3)
|
2015-11-30 01:44:30 +00:00
|
|
|
#define USB2_INT_ENABLE_USBH_INTB_EN BIT(2)
|
|
|
|
#define USB2_INT_ENABLE_USBH_INTA_EN BIT(1)
|
2015-11-30 01:44:32 +00:00
|
|
|
#define USB2_INT_ENABLE_INIT (USB2_INT_ENABLE_UCOM_INTEN | \
|
|
|
|
USB2_INT_ENABLE_USBH_INTB_EN | \
|
2015-11-30 01:44:30 +00:00
|
|
|
USB2_INT_ENABLE_USBH_INTA_EN)
|
|
|
|
|
|
|
|
/* USBCTR */
|
|
|
|
#define USB2_USBCTR_DIRPD BIT(2)
|
|
|
|
#define USB2_USBCTR_PLL_RST BIT(1)
|
|
|
|
|
|
|
|
/* SPD_RSM_TIMSET */
|
|
|
|
#define USB2_SPD_RSM_TIMSET_INIT 0x014e029b
|
|
|
|
|
|
|
|
/* OC_TIMSET */
|
|
|
|
#define USB2_OC_TIMSET_INIT 0x000209ab
|
|
|
|
|
2015-11-30 01:44:31 +00:00
|
|
|
/* COMMCTRL */
|
|
|
|
#define USB2_COMMCTRL_OTG_PERI BIT(31) /* 1 = Peripheral mode */
|
|
|
|
|
2015-11-30 01:44:32 +00:00
|
|
|
/* OBINTSTA and OBINTEN */
|
|
|
|
#define USB2_OBINT_SESSVLDCHG BIT(12)
|
|
|
|
#define USB2_OBINT_IDDIGCHG BIT(11)
|
|
|
|
#define USB2_OBINT_BITS (USB2_OBINT_SESSVLDCHG | \
|
|
|
|
USB2_OBINT_IDDIGCHG)
|
|
|
|
|
2015-11-30 01:44:31 +00:00
|
|
|
/* VBCTRL */
|
|
|
|
#define USB2_VBCTRL_DRVVBUSSEL BIT(8)
|
|
|
|
|
|
|
|
/* LINECTRL1 */
|
|
|
|
#define USB2_LINECTRL1_DPRPD_EN BIT(19)
|
|
|
|
#define USB2_LINECTRL1_DP_RPD BIT(18)
|
|
|
|
#define USB2_LINECTRL1_DMRPD_EN BIT(17)
|
|
|
|
#define USB2_LINECTRL1_DM_RPD BIT(16)
|
|
|
|
|
|
|
|
/* ADPCTRL */
|
|
|
|
#define USB2_ADPCTRL_OTGSESSVLD BIT(20)
|
|
|
|
#define USB2_ADPCTRL_IDDIG BIT(19)
|
|
|
|
#define USB2_ADPCTRL_IDPULLUP BIT(5) /* 1 = ID sampling is enabled */
|
|
|
|
#define USB2_ADPCTRL_DRVVBUS BIT(4)
|
|
|
|
|
2015-11-30 01:44:30 +00:00
|
|
|
struct rcar_gen3_chan {
|
2016-03-03 10:09:04 +00:00
|
|
|
void __iomem *base;
|
2016-04-29 08:52:25 +00:00
|
|
|
struct extcon_dev *extcon;
|
2015-11-30 01:44:30 +00:00
|
|
|
struct phy *phy;
|
2016-03-03 10:09:05 +00:00
|
|
|
struct regulator *vbus;
|
2016-06-27 06:36:53 +00:00
|
|
|
struct work_struct work;
|
|
|
|
bool extcon_host;
|
2016-01-07 09:16:44 +00:00
|
|
|
bool has_otg;
|
2015-11-30 01:44:30 +00:00
|
|
|
};
|
|
|
|
|
2016-06-27 06:36:53 +00:00
|
|
|
static void rcar_gen3_phy_usb2_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct rcar_gen3_chan *ch = container_of(work, struct rcar_gen3_chan,
|
|
|
|
work);
|
|
|
|
|
|
|
|
if (ch->extcon_host) {
|
|
|
|
extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, true);
|
|
|
|
extcon_set_cable_state_(ch->extcon, EXTCON_USB, false);
|
|
|
|
} else {
|
|
|
|
extcon_set_cable_state_(ch->extcon, EXTCON_USB_HOST, false);
|
|
|
|
extcon_set_cable_state_(ch->extcon, EXTCON_USB, true);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-11-30 01:44:31 +00:00
|
|
|
static void rcar_gen3_set_host_mode(struct rcar_gen3_chan *ch, int host)
|
|
|
|
{
|
2016-03-03 10:09:04 +00:00
|
|
|
void __iomem *usb2_base = ch->base;
|
2015-11-30 01:44:31 +00:00
|
|
|
u32 val = readl(usb2_base + USB2_COMMCTRL);
|
|
|
|
|
|
|
|
dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, host);
|
|
|
|
if (host)
|
|
|
|
val &= ~USB2_COMMCTRL_OTG_PERI;
|
|
|
|
else
|
|
|
|
val |= USB2_COMMCTRL_OTG_PERI;
|
|
|
|
writel(val, usb2_base + USB2_COMMCTRL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rcar_gen3_set_linectrl(struct rcar_gen3_chan *ch, int dp, int dm)
|
|
|
|
{
|
2016-03-03 10:09:04 +00:00
|
|
|
void __iomem *usb2_base = ch->base;
|
2015-11-30 01:44:31 +00:00
|
|
|
u32 val = readl(usb2_base + USB2_LINECTRL1);
|
|
|
|
|
|
|
|
dev_vdbg(&ch->phy->dev, "%s: %08x, %d, %d\n", __func__, val, dp, dm);
|
|
|
|
val &= ~(USB2_LINECTRL1_DP_RPD | USB2_LINECTRL1_DM_RPD);
|
|
|
|
if (dp)
|
|
|
|
val |= USB2_LINECTRL1_DP_RPD;
|
|
|
|
if (dm)
|
|
|
|
val |= USB2_LINECTRL1_DM_RPD;
|
|
|
|
writel(val, usb2_base + USB2_LINECTRL1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rcar_gen3_enable_vbus_ctrl(struct rcar_gen3_chan *ch, int vbus)
|
|
|
|
{
|
2016-03-03 10:09:04 +00:00
|
|
|
void __iomem *usb2_base = ch->base;
|
2015-11-30 01:44:31 +00:00
|
|
|
u32 val = readl(usb2_base + USB2_ADPCTRL);
|
|
|
|
|
|
|
|
dev_vdbg(&ch->phy->dev, "%s: %08x, %d\n", __func__, val, vbus);
|
|
|
|
if (vbus)
|
|
|
|
val |= USB2_ADPCTRL_DRVVBUS;
|
|
|
|
else
|
|
|
|
val &= ~USB2_ADPCTRL_DRVVBUS;
|
|
|
|
writel(val, usb2_base + USB2_ADPCTRL);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rcar_gen3_init_for_host(struct rcar_gen3_chan *ch)
|
|
|
|
{
|
|
|
|
rcar_gen3_set_linectrl(ch, 1, 1);
|
|
|
|
rcar_gen3_set_host_mode(ch, 1);
|
|
|
|
rcar_gen3_enable_vbus_ctrl(ch, 1);
|
2016-04-29 08:52:25 +00:00
|
|
|
|
2016-06-27 06:36:53 +00:00
|
|
|
ch->extcon_host = true;
|
|
|
|
schedule_work(&ch->work);
|
2015-11-30 01:44:31 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void rcar_gen3_init_for_peri(struct rcar_gen3_chan *ch)
|
|
|
|
{
|
|
|
|
rcar_gen3_set_linectrl(ch, 0, 1);
|
|
|
|
rcar_gen3_set_host_mode(ch, 0);
|
|
|
|
rcar_gen3_enable_vbus_ctrl(ch, 0);
|
2016-04-29 08:52:25 +00:00
|
|
|
|
2016-06-27 06:36:53 +00:00
|
|
|
ch->extcon_host = false;
|
|
|
|
schedule_work(&ch->work);
|
2015-11-30 01:44:31 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static bool rcar_gen3_check_id(struct rcar_gen3_chan *ch)
|
|
|
|
{
|
2016-03-03 10:09:04 +00:00
|
|
|
return !!(readl(ch->base + USB2_ADPCTRL) & USB2_ADPCTRL_IDDIG);
|
2015-11-30 01:44:31 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void rcar_gen3_device_recognition(struct rcar_gen3_chan *ch)
|
|
|
|
{
|
2016-05-31 12:47:17 +00:00
|
|
|
if (!rcar_gen3_check_id(ch))
|
2015-11-30 01:44:31 +00:00
|
|
|
rcar_gen3_init_for_host(ch);
|
|
|
|
else
|
|
|
|
rcar_gen3_init_for_peri(ch);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
|
|
|
|
{
|
2016-03-03 10:09:04 +00:00
|
|
|
void __iomem *usb2_base = ch->base;
|
2015-11-30 01:44:31 +00:00
|
|
|
u32 val;
|
|
|
|
|
|
|
|
val = readl(usb2_base + USB2_VBCTRL);
|
|
|
|
writel(val | USB2_VBCTRL_DRVVBUSSEL, usb2_base + USB2_VBCTRL);
|
2015-11-30 01:44:32 +00:00
|
|
|
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
|
|
|
|
val = readl(usb2_base + USB2_OBINTEN);
|
|
|
|
writel(val | USB2_OBINT_BITS, usb2_base + USB2_OBINTEN);
|
2015-11-30 01:44:31 +00:00
|
|
|
val = readl(usb2_base + USB2_ADPCTRL);
|
|
|
|
writel(val | USB2_ADPCTRL_IDPULLUP, usb2_base + USB2_ADPCTRL);
|
|
|
|
val = readl(usb2_base + USB2_LINECTRL1);
|
|
|
|
rcar_gen3_set_linectrl(ch, 0, 0);
|
|
|
|
writel(val | USB2_LINECTRL1_DPRPD_EN | USB2_LINECTRL1_DMRPD_EN,
|
|
|
|
usb2_base + USB2_LINECTRL1);
|
|
|
|
|
|
|
|
rcar_gen3_device_recognition(ch);
|
|
|
|
}
|
|
|
|
|
2015-11-30 01:44:30 +00:00
|
|
|
static int rcar_gen3_phy_usb2_init(struct phy *p)
|
|
|
|
{
|
|
|
|
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
|
2016-03-03 10:09:04 +00:00
|
|
|
void __iomem *usb2_base = channel->base;
|
2015-11-30 01:44:30 +00:00
|
|
|
|
|
|
|
/* Initialize USB2 part */
|
|
|
|
writel(USB2_INT_ENABLE_INIT, usb2_base + USB2_INT_ENABLE);
|
|
|
|
writel(USB2_SPD_RSM_TIMSET_INIT, usb2_base + USB2_SPD_RSM_TIMSET);
|
|
|
|
writel(USB2_OC_TIMSET_INIT, usb2_base + USB2_OC_TIMSET);
|
|
|
|
|
2016-01-07 09:16:44 +00:00
|
|
|
/* Initialize otg part */
|
|
|
|
if (channel->has_otg)
|
2015-11-30 01:44:31 +00:00
|
|
|
rcar_gen3_init_otg(channel);
|
2015-11-30 01:44:30 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rcar_gen3_phy_usb2_exit(struct phy *p)
|
|
|
|
{
|
|
|
|
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
|
|
|
|
|
2016-03-03 10:09:04 +00:00
|
|
|
writel(0, channel->base + USB2_INT_ENABLE);
|
2015-11-30 01:44:30 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rcar_gen3_phy_usb2_power_on(struct phy *p)
|
|
|
|
{
|
|
|
|
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
|
2016-03-03 10:09:04 +00:00
|
|
|
void __iomem *usb2_base = channel->base;
|
2015-11-30 01:44:30 +00:00
|
|
|
u32 val;
|
2016-03-03 10:09:05 +00:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (channel->vbus) {
|
|
|
|
ret = regulator_enable(channel->vbus);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
}
|
2015-11-30 01:44:30 +00:00
|
|
|
|
|
|
|
val = readl(usb2_base + USB2_USBCTR);
|
|
|
|
val |= USB2_USBCTR_PLL_RST;
|
|
|
|
writel(val, usb2_base + USB2_USBCTR);
|
|
|
|
val &= ~USB2_USBCTR_PLL_RST;
|
|
|
|
writel(val, usb2_base + USB2_USBCTR);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-03-03 10:09:05 +00:00
|
|
|
static int rcar_gen3_phy_usb2_power_off(struct phy *p)
|
|
|
|
{
|
|
|
|
struct rcar_gen3_chan *channel = phy_get_drvdata(p);
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (channel->vbus)
|
|
|
|
ret = regulator_disable(channel->vbus);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2015-11-30 01:44:30 +00:00
|
|
|
static struct phy_ops rcar_gen3_phy_usb2_ops = {
|
|
|
|
.init = rcar_gen3_phy_usb2_init,
|
|
|
|
.exit = rcar_gen3_phy_usb2_exit,
|
|
|
|
.power_on = rcar_gen3_phy_usb2_power_on,
|
2016-03-03 10:09:05 +00:00
|
|
|
.power_off = rcar_gen3_phy_usb2_power_off,
|
2015-11-30 01:44:30 +00:00
|
|
|
.owner = THIS_MODULE,
|
|
|
|
};
|
|
|
|
|
2015-11-30 01:44:32 +00:00
|
|
|
static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
|
|
|
|
{
|
|
|
|
struct rcar_gen3_chan *ch = _ch;
|
2016-03-03 10:09:04 +00:00
|
|
|
void __iomem *usb2_base = ch->base;
|
2015-11-30 01:44:32 +00:00
|
|
|
u32 status = readl(usb2_base + USB2_OBINTSTA);
|
|
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
|
|
|
|
if (status & USB2_OBINT_BITS) {
|
|
|
|
dev_vdbg(&ch->phy->dev, "%s: %08x\n", __func__, status);
|
|
|
|
writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
|
|
|
|
rcar_gen3_device_recognition(ch);
|
|
|
|
ret = IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2015-11-30 01:44:30 +00:00
|
|
|
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
|
|
|
|
{ .compatible = "renesas,usb2-phy-r8a7795" },
|
2016-08-24 06:49:22 +00:00
|
|
|
{ .compatible = "renesas,usb2-phy-r8a7796" },
|
2016-03-07 01:58:41 +00:00
|
|
|
{ .compatible = "renesas,rcar-gen3-usb2-phy" },
|
2015-11-30 01:44:30 +00:00
|
|
|
{ }
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, rcar_gen3_phy_usb2_match_table);
|
|
|
|
|
2016-04-29 08:52:25 +00:00
|
|
|
static const unsigned int rcar_gen3_phy_cable[] = {
|
|
|
|
EXTCON_USB,
|
|
|
|
EXTCON_USB_HOST,
|
|
|
|
EXTCON_NONE,
|
|
|
|
};
|
|
|
|
|
2015-11-30 01:44:30 +00:00
|
|
|
static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
struct rcar_gen3_chan *channel;
|
|
|
|
struct phy_provider *provider;
|
|
|
|
struct resource *res;
|
2016-01-07 09:16:44 +00:00
|
|
|
int irq;
|
2015-11-30 01:44:30 +00:00
|
|
|
|
|
|
|
if (!dev->of_node) {
|
|
|
|
dev_err(dev, "This driver needs device tree\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
channel = devm_kzalloc(dev, sizeof(*channel), GFP_KERNEL);
|
|
|
|
if (!channel)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2016-01-07 09:16:44 +00:00
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
2016-03-03 10:09:04 +00:00
|
|
|
channel->base = devm_ioremap_resource(dev, res);
|
|
|
|
if (IS_ERR(channel->base))
|
|
|
|
return PTR_ERR(channel->base);
|
2015-11-30 01:44:30 +00:00
|
|
|
|
2016-01-07 09:16:44 +00:00
|
|
|
/* call request_irq for OTG */
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
|
|
if (irq >= 0) {
|
2016-04-29 08:52:25 +00:00
|
|
|
int ret;
|
|
|
|
|
2016-06-27 06:36:53 +00:00
|
|
|
INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
|
2016-01-07 09:16:44 +00:00
|
|
|
irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
|
|
|
|
IRQF_SHARED, dev_name(dev), channel);
|
2015-11-30 01:44:32 +00:00
|
|
|
if (irq < 0)
|
|
|
|
dev_err(dev, "No irq handler (%d)\n", irq);
|
2016-01-07 09:16:44 +00:00
|
|
|
channel->has_otg = true;
|
2016-04-29 08:52:25 +00:00
|
|
|
channel->extcon = devm_extcon_dev_allocate(dev,
|
|
|
|
rcar_gen3_phy_cable);
|
|
|
|
if (IS_ERR(channel->extcon))
|
|
|
|
return PTR_ERR(channel->extcon);
|
|
|
|
|
|
|
|
ret = devm_extcon_dev_register(dev, channel->extcon);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "Failed to register extcon\n");
|
|
|
|
return ret;
|
|
|
|
}
|
2015-11-30 01:44:30 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* devm_phy_create() will call pm_runtime_enable(dev); */
|
|
|
|
channel->phy = devm_phy_create(dev, NULL, &rcar_gen3_phy_usb2_ops);
|
|
|
|
if (IS_ERR(channel->phy)) {
|
|
|
|
dev_err(dev, "Failed to create USB2 PHY\n");
|
|
|
|
return PTR_ERR(channel->phy);
|
|
|
|
}
|
|
|
|
|
2016-03-03 10:09:05 +00:00
|
|
|
channel->vbus = devm_regulator_get_optional(dev, "vbus");
|
|
|
|
if (IS_ERR(channel->vbus)) {
|
|
|
|
if (PTR_ERR(channel->vbus) == -EPROBE_DEFER)
|
|
|
|
return PTR_ERR(channel->vbus);
|
|
|
|
channel->vbus = NULL;
|
|
|
|
}
|
|
|
|
|
2015-11-30 01:44:30 +00:00
|
|
|
phy_set_drvdata(channel->phy, channel);
|
|
|
|
|
|
|
|
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
if (IS_ERR(provider))
|
|
|
|
dev_err(dev, "Failed to register PHY provider\n");
|
|
|
|
|
|
|
|
return PTR_ERR_OR_ZERO(provider);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver rcar_gen3_phy_usb2_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "phy_rcar_gen3_usb2",
|
|
|
|
.of_match_table = rcar_gen3_phy_usb2_match_table,
|
|
|
|
},
|
|
|
|
.probe = rcar_gen3_phy_usb2_probe,
|
|
|
|
};
|
|
|
|
module_platform_driver(rcar_gen3_phy_usb2_driver);
|
|
|
|
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
|
|
MODULE_DESCRIPTION("Renesas R-Car Gen3 USB 2.0 PHY");
|
|
|
|
MODULE_AUTHOR("Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>");
|