leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e1e50e1e1e
linux/arch/powerpc/platforms/powernv/powernv.h

36 lines
735 B
C
Raw Normal View History

powerpc: Add skeleton PowerNV platform This adds a skeletton for the new Power "Non Virtualized" platform which will be used by machines supporting running without an hypervisor, for example in order to run KVM. These machines will be using a new firmware called OPAL for which the support will be provided by later patches. The PowerNV platform is intended to be also usable under the BML environment used internally for early CPU bringup which is why the code also supports using RTAS instead of OPAL in various places. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19 17:44:52 +00:00
#ifndef _POWERNV_H
#define _POWERNV_H
#ifdef CONFIG_SMP
extern void pnv_smp_init(void);
#else
static inline void pnv_smp_init(void) { }
#endif
powerpc/powernv: Add iommu DMA bypass support for IODA2 This patch adds the support for to create a direct iommu "bypass" window on IODA2 bridges (such as Power8) allowing to bypass iommu page translation completely for 64-bit DMA capable devices, thus significantly improving DMA performances. Additionally, this adds a hook to the struct iommu_table so that the IOMMU API / VFIO can disable the bypass when external ownership is requested, since in that case, the device will be used by an environment such as userspace or a KVM guest which must not be allowed to bypass translations. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 00:32:38 +00:00
struct pci_dev;
powerpc/powernv: Add support for p5ioc2 PCI-X and PCIe This adds support for PCI-X and PCIe on the p5ioc2 IO hub using OPAL. This includes allocating & setting up TCE tables and config space access routines. This also supports fallbacks via RTAS when OPAL is absent, using legacy TCE format pre-allocated via the device-tree (BML style) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19 17:45:05 +00:00
#ifdef CONFIG_PCI
extern void pnv_pci_init(void);
powerpc/powernv: Improve kexec reliability We add a machine_shutdown hook that frees the OPAL interrupts (so they get masked at the source and don't fire while kexec'ing) and which triggers an IODA reset on all the PCIe host bridges which will have the effect of blocking all DMAs and subsequent PCIs interrupts. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-10 06:59:18 +00:00
extern void pnv_pci_shutdown(void);
powerpc/powernv: Override dma_get_required_mask() The dma_get_required_mask() function is used by some drivers to query the platform about what DMA mask is needed to cover all of memory. This is a bit of a strange semantic when we have to choose between IOMMU translation or bypass, but essentially what it means is "what DMA mask will give best performances". Currently, our IOMMU backend always returns a 32-bit mask here, we don't do anything special to it when we have bypass available. This causes some drivers to choose a 32-bit mask, thus losing the ability to use the bypass window, thinking this is more efficient. The problem was reported from the driver of following device: 0004:03:00.0 0107: 1000:0087 (rev 05) 0004:03:00.0 Serial Attached SCSI controller: LSI Logic / Symbios \ Logic SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05) This patch adds an override of that function in order to, instead, return a 64-bit mask whenever a bypass window is available in order for drivers to prefer this configuration. Reported-by: Murali N. Iyer <mniyer@us.ibm.com> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30 02:39:10 +00:00
extern u64 pnv_pci_dma_get_required_mask(struct pci_dev *pdev);
powerpc/powernv: Add support for p5ioc2 PCI-X and PCIe This adds support for PCI-X and PCIe on the p5ioc2 IO hub using OPAL. This includes allocating & setting up TCE tables and config space access routines. This also supports fallbacks via RTAS when OPAL is absent, using legacy TCE format pre-allocated via the device-tree (BML style) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19 17:45:05 +00:00
#else
static inline void pnv_pci_init(void) { }
powerpc/powernv: Improve kexec reliability We add a machine_shutdown hook that frees the OPAL interrupts (so they get masked at the source and don't fire while kexec'ing) and which triggers an IODA reset on all the PCIe host bridges which will have the effect of blocking all DMAs and subsequent PCIs interrupts. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-10 06:59:18 +00:00
static inline void pnv_pci_shutdown(void) { }
powerpc/powernv: Add iommu DMA bypass support for IODA2 This patch adds the support for to create a direct iommu "bypass" window on IODA2 bridges (such as Power8) allowing to bypass iommu page translation completely for 64-bit DMA capable devices, thus significantly improving DMA performances. Additionally, this adds a hook to the struct iommu_table so that the IOMMU API / VFIO can disable the bypass when external ownership is requested, since in that case, the device will be used by an environment such as userspace or a KVM guest which must not be allowed to bypass translations. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-02-11 00:32:38 +00:00
powerpc/powernv: Override dma_get_required_mask() The dma_get_required_mask() function is used by some drivers to query the platform about what DMA mask is needed to cover all of memory. This is a bit of a strange semantic when we have to choose between IOMMU translation or bypass, but essentially what it means is "what DMA mask will give best performances". Currently, our IOMMU backend always returns a 32-bit mask here, we don't do anything special to it when we have bypass available. This causes some drivers to choose a 32-bit mask, thus losing the ability to use the bypass window, thinking this is more efficient. The problem was reported from the driver of following device: 0004:03:00.0 0107: 1000:0087 (rev 05) 0004:03:00.0 Serial Attached SCSI controller: LSI Logic / Symbios \ Logic SAS2308 PCI-Express Fusion-MPT SAS-2 (rev 05) This patch adds an override of that function in order to, instead, return a 64-bit mask whenever a bypass window is available in order for drivers to prefer this configuration. Reported-by: Murali N. Iyer <mniyer@us.ibm.com> Suggested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-09-30 02:39:10 +00:00
static inline u64 pnv_pci_dma_get_required_mask(struct pci_dev *pdev)
{
return 0;
}
powerpc/powernv: Add support for p5ioc2 PCI-X and PCIe This adds support for PCI-X and PCIe on the p5ioc2 IO hub using OPAL. This includes allocating & setting up TCE tables and config space access routines. This also supports fallbacks via RTAS when OPAL is absent, using legacy TCE format pre-allocated via the device-tree (BML style) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19 17:45:05 +00:00
#endif
powerpc/powernv: Enable Offline CPUs to enter deep idle states The secondary threads should enter deep idle states so as to gain maximum powersavings when the entire core is offline. To do so the offline path must be made aware of the available deepest idle state. Hence probe the device tree for the possible idle states in powernv core code and expose the deepest idle state through flags. Since the device tree is probed by the cpuidle driver as well, move the parameters required to discover the idle states into an appropriate common place to both the driver and the powernv core code. Another point is that fastsleep idle state may require workarounds in the kernel to function properly. This workaround is introduced in the subsequent patches. However neither the cpuidle driver or the hotplug path need be bothered about this workaround. They will be taken care of by the core powernv code. Originally-by: Srivatsa S. Bhat <srivatsa@mit.edu> Signed-off-by: Preeti U. Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: linux-pm@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2014-12-09 18:56:51 +00:00
extern u32 pnv_get_supported_cpuidle_states(void);
powerpc/powernv: Add PIO accessors for Power8 LPC bus This uses the hooks provided by CONFIG_PPC_INDIRECT_PIO to implement a set of hooks for IO port access to use the LPC bus via OPAL calls for the first 64K of IO space Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-15 03:03:11 +00:00
extern void pnv_lpc_init(void);
powerpc/powernv: Add a virtual irqchip for opal events Whenever an interrupt is received for opal the linux kernel gets a bitfield indicating certain events that have occurred and need handling by the various device drivers. Currently this is handled using a notifier interface where we call every device driver that has registered to receive opal events. This approach has several drawbacks. For example each driver has to do its own checking to see if the event is relevant as well as event masking. There is also no easy method of recording the number of times we receive particular events. This patch solves these issues by exposing opal events via the standard interrupt APIs by adding a new interrupt chip and domain. Drivers can then register for the appropriate events using standard kernel calls such as irq_of_parse_and_map(). Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-05-15 04:06:37 +00:00
extern void opal_handle_events(uint64_t events);
extern void opal_event_shutdown(void);
powerpc/powernv: Add support for POWER8 split core on powernv Upcoming POWER8 chips support a concept called split core. This is where the core can be split into subcores that although not full cores, are able to appear as full cores to a guest. The splitting & unsplitting procedure is mildly complicated, and explained at length in the comments within the patch. One notable detail is that when splitting or unsplitting we need to pull offline cpus out of their offline state to do work as part of the procedure. The interface for changing the split mode is via a sysfs file, eg: $ echo 2 > /sys/devices/system/cpu/subcores_per_core Currently supported values are '1', '2' and '4'. And indicate respectively that the core should be unsplit, split in half, and split in quarters. These modes correspond to threads_per_subcore of 8, 4 and 2. We do not allow changing the split mode while KVM VMs are active. This is to prevent the value changing while userspace is configuring the VM, and also to prevent the mode being changed in such a way that existing guests are unable to be run. CPU hotplug fixes by Srivatsa. max_cpus fixes by Mahesh. cpuset fixes by benh. Fix for irq race by paulus. The rest by mikey and mpe. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-05-23 08:15:30 +00:00
bool cpu_core_split_required(void);
powerpc: Add skeleton PowerNV platform This adds a skeletton for the new Power "Non Virtualized" platform which will be used by machines supporting running without an hypervisor, for example in order to run KVM. These machines will be using a new firmware called OPAL for which the support will be provided by later patches. The PowerNV platform is intended to be also usable under the BML environment used internally for early CPU bringup which is why the code also supports using RTAS instead of OPAL in various places. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-19 17:44:52 +00:00
#endif /* _POWERNV_H */
Reference in New Issue Copy Permalink