linux/drivers/gpu/host1x/Makefile

host1x-y = \
	bus.o \
	syncpt.o \
	dev.o \
	intr.o \
	cdma.o \
	channel.o \
	job.o \
	debug.o \
	mipi.o \
	hw/host1x01.o \
	hw/host1x02.o \
	hw/host1x04.o \
	hw/host1x05.o \
	hw/host1x06.o

obj-$(CONFIG_TEGRA_HOST1X) += host1x.o
gpu: host1x: Add host1x driver Add host1x, the driver for host1x and its client unit 2D. The Tegra host1x module is the DMA engine for register access to Tegra's graphics- and multimedia-related modules. The modules served by host1x are referred to as clients. host1x includes some other functionality, such as synchronization. Signed-off-by: Arto Merilainen <amerilainen@nvidia.com> Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> 2013-03-22 14:34:01 +00:00			`host1x-y = \`
drm/tegra: Move subdevice infrastructure to host1x The Tegra DRM driver currently uses some infrastructure to defer the DRM core initialization until all required devices have registered. The same infrastructure can potentially be used by any other driver that requires more than a single sub-device of the host1x module. Make the infrastructure more generic and keep only the DRM specific code in the DRM part of the driver. Eventually this will make it easy to move the DRM driver part back to the DRM subsystem. Signed-off-by: Thierry Reding <treding@nvidia.com> 2013-10-14 12:43:22 +00:00			`bus.o \`
gpu: host1x: Add host1x driver Add host1x, the driver for host1x and its client unit 2D. The Tegra host1x module is the DMA engine for register access to Tegra's graphics- and multimedia-related modules. The modules served by host1x are referred to as clients. host1x includes some other functionality, such as synchronization. Signed-off-by: Arto Merilainen <amerilainen@nvidia.com> Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> 2013-03-22 14:34:01 +00:00			`syncpt.o \`
			`dev.o \`
gpu: host1x: Add syncpoint wait and interrupts Add support for sync point interrupts, and sync point wait. Sync point wait used interrupts for unblocking wait. Signed-off-by: Arto Merilainen <amerilainen@nvidia.com> Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> 2013-03-22 14:34:02 +00:00			`intr.o \`
gpu: host1x: Add channel support Add support for host1x client modules, and host1x channels to submit work to the clients. Signed-off-by: Arto Merilainen <amerilainen@nvidia.com> Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> 2013-03-22 14:34:03 +00:00			`cdma.o \`
			`channel.o \`
			`job.o \`
gpu: host1x: Add debug support Add support for host1x debugging. Adds debugfs entries, and dumps channel state to UART in case of stuck job. Signed-off-by: Arto Merilainen <amerilainen@nvidia.com> Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> 2013-03-22 14:34:04 +00:00			`debug.o \`
gpu: host1x: Add MIPI pad calibration support This driver adds support to perform calibration of the MIPI pads for CSI and DSI. Signed-off-by: Thierry Reding <treding@nvidia.com> 2013-09-02 07:48:53 +00:00			`mipi.o \`
gpu: host1x: Add support for Tegra114 Tegra114 uses a slightly updated version of host1x with an additional syncpoint. Signed-off-by: Thierry Reding <treding@nvidia.com> 2013-09-30 12:17:39 +00:00			`hw/host1x01.o \`
gpu: host1x: Add Tegra124 support Tegra124 has 192 syncpoints whereas its predecessors had 32 syncpoints. This required changes to the hardware register layout. Signed-off-by: Arto Merilainen <amerilainen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 2013-11-15 13:58:05 +00:00			`hw/host1x02.o \`
gpu: host1x: Add Tegra210 support The host1x unit found in Tegra210 SoCs is very similar to the unit in Tegra124, but it has 2 additional channels for a total of 14 channels. Signed-off-by: Thierry Reding <treding@nvidia.com> 2015-03-23 09:46:28 +00:00			`hw/host1x04.o \`
gpu: host1x: Add Tegra186 support Add support for the implementation of Host1x present on the Tegra186. The register space has been shuffled around a little bit, requiring addition of some chip-specific code sections. Tegra186 also adds several new features, most importantly the hypervisor, but those are not yet supported with this commit. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 2017-09-05 08:43:05 +00:00			`hw/host1x05.o \`
			`hw/host1x06.o`
gpu: host1x: Add host1x driver Add host1x, the driver for host1x and its client unit 2D. The Tegra host1x module is the DMA engine for register access to Tegra's graphics- and multimedia-related modules. The modules served by host1x are referred to as clients. host1x includes some other functionality, such as synchronization. Signed-off-by: Arto Merilainen <amerilainen@nvidia.com> Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Erik Faye-Lund <kusmabite@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> 2013-03-22 14:34:01 +00:00
			`obj-$(CONFIG_TEGRA_HOST1X) += host1x.o`