leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dffead4e42
linux/arch/i386/kernel/traps.c

1218 lines
31 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* linux/arch/i386/traps.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Pentium III FXSR, SSE support
* Gareth Hughes <gareth@valinux.com>, May 2000
*/
/*
* 'Traps.c' handles hardware traps and faults after we have saved some
* state in 'asm.s'.
*/
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/highmem.h>
#include <linux/kallsyms.h>
#include <linux/ptrace.h>
#include <linux/utsname.h>
#include <linux/kprobes.h>
[PATCH] kdump: Use real pt_regs from exception Makes kexec_crashdump() take a pt_regs * as an argument. This allows to get exact register state at the point of the crash. If we come from direct panic assertion NULL will be passed and the current registers saved before crashdump. This hooks into two places: die(): check the conditions under which we will panic when calling do_exit and go there directly with the pt_regs that caused the fatal fault. die_nmi(): If we receive an NMI lockup while in the kernel use the pt_regs and go directly to crash_kexec(). We're probably nested up badly at this point so this might be the only chance to escape with proper information. Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:26 +00:00
#include <linux/kexec.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_EISA
#include <linux/ioport.h>
#include <linux/eisa.h>
#endif
#ifdef CONFIG_MCA
#include <linux/mca.h>
#endif
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/atomic.h>
#include <asm/debugreg.h>
#include <asm/desc.h>
#include <asm/i387.h>
#include <asm/nmi.h>
#include <asm/smp.h>
#include <asm/arch_hooks.h>
#include <asm/kdebug.h>
#include <linux/module.h>
#include "mach_traps.h"
asmlinkage int system_call(void);
struct desc_struct default_ldt[] = { { 0, 0 }, { 0, 0 }, { 0, 0 },
{ 0, 0 }, { 0, 0 } };
/* Do we ignore FPU interrupts ? */
char ignore_fpu_irq = 0;
/*
* The IDT has to be page-aligned to simplify the Pentium
* F0 0F bug workaround.. We have a special link segment
* for this.
*/
struct desc_struct idt_table[256] __attribute__((__section__(".data.idt"))) = { {0, 0}, };
asmlinkage void divide_error(void);
asmlinkage void debug(void);
asmlinkage void nmi(void);
asmlinkage void int3(void);
asmlinkage void overflow(void);
asmlinkage void bounds(void);
asmlinkage void invalid_op(void);
asmlinkage void device_not_available(void);
asmlinkage void coprocessor_segment_overrun(void);
asmlinkage void invalid_TSS(void);
asmlinkage void segment_not_present(void);
asmlinkage void stack_segment(void);
asmlinkage void general_protection(void);
asmlinkage void page_fault(void);
asmlinkage void coprocessor_error(void);
asmlinkage void simd_coprocessor_error(void);
asmlinkage void alignment_check(void);
asmlinkage void spurious_interrupt_bug(void);
asmlinkage void machine_check(void);
static int kstack_depth_to_print = 24;
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
ATOMIC_NOTIFIER_HEAD(i386die_chain);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
int register_die_notifier(struct notifier_block *nb)
{
[PATCH] i386: actively synchronize vmalloc area when registering certain callbacks Registering a callback handler through register_die_notifier() is obviously primarily intended for use by modules. However, the way these currently get called it is basically impossible for them to actually be used by modules, as there is, on non-PAE configurationes, a good chance (the larger the module, the better) for the system to crash as a result. This is because the callback gets invoked (a) in the page fault path before the top level page table propagation gets carried out (hence a fault to propagate the top level page table entry/entries mapping to module's code/data would nest infinitly) and (b) in the NMI path, where nested faults must absolutely not happen, since otherwise the IRET from the nested fault re-enables NMIs, potentially resulting in nested NMI occurences. Besides the modular aspect, similar problems would even arise for in- kernel consumers of the API if they touched ioremap()ed or vmalloc()ed memory inside their handlers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:45 +00:00
vmalloc_sync_all();
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
return atomic_notifier_chain_register(&i386die_chain, nb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] Remove i386_ksyms.c, almost. * EXPORT_SYMBOL's moved to other files * #include <linux/config.h>, <linux/module.h> where needed * #include's in i386_ksyms.c cleaned up * After copy-paste, redundant due to Makefiles rules preprocessor directives removed: #ifdef CONFIG_FOO EXPORT_SYMBOL(foo); #endif obj-$(CONFIG_FOO) += foo.o * Tiny reformat to fit in 80 columns Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:08:33 +00:00
EXPORT_SYMBOL(register_die_notifier);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] Notifier chain update: API changes The kernel's implementation of notifier chains is unsafe. There is no protection against entries being added to or removed from a chain while the chain is in use. The issues were discussed in this thread: http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2 We noticed that notifier chains in the kernel fall into two basic usage classes: "Blocking" chains are always called from a process context and the callout routines are allowed to sleep; "Atomic" chains can be called from an atomic context and the callout routines are not allowed to sleep. We decided to codify this distinction and make it part of the API. Therefore this set of patches introduces three new, parallel APIs: one for blocking notifiers, one for atomic notifiers, and one for "raw" notifiers (which is really just the old API under a new name). New kinds of data structures are used for the heads of the chains, and new routines are defined for registration, unregistration, and calling a chain. The three APIs are explained in include/linux/notifier.h and their implementation is in kernel/sys.c. With atomic and blocking chains, the implementation guarantees that the chain links will not be corrupted and that chain callers will not get messed up by entries being added or removed. For raw chains the implementation provides no guarantees at all; users of this API must provide their own protections. (The idea was that situations may come up where the assumptions of the atomic and blocking APIs are not appropriate, so it should be possible for users to handle these things in their own way.) There are some limitations, which should not be too hard to live with. For atomic/blocking chains, registration and unregistration must always be done in a process context since the chain is protected by a mutex/rwsem. Also, a callout routine for a non-raw chain must not try to register or unregister entries on its own chain. (This did happen in a couple of places and the code had to be changed to avoid it.) Since atomic chains may be called from within an NMI handler, they cannot use spinlocks for synchronization. Instead we use RCU. The overhead falls almost entirely in the unregister routine, which is okay since unregistration is much less frequent that calling a chain. Here is the list of chains that we adjusted and their classifications. None of them use the raw API, so for the moment it is only a placeholder. ATOMIC CHAINS ------------- arch/i386/kernel/traps.c: i386die_chain arch/ia64/kernel/traps.c: ia64die_chain arch/powerpc/kernel/traps.c: powerpc_die_chain arch/sparc64/kernel/traps.c: sparc64die_chain arch/x86_64/kernel/traps.c: die_chain drivers/char/ipmi/ipmi_si_intf.c: xaction_notifier_list kernel/panic.c: panic_notifier_list kernel/profile.c: task_free_notifier net/bluetooth/hci_core.c: hci_notifier net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_chain net/ipv4/netfilter/ip_conntrack_core.c: ip_conntrack_expect_chain net/ipv6/addrconf.c: inet6addr_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_chain net/netfilter/nf_conntrack_core.c: nf_conntrack_expect_chain net/netlink/af_netlink.c: netlink_chain BLOCKING CHAINS --------------- arch/powerpc/platforms/pseries/reconfig.c: pSeries_reconfig_chain arch/s390/kernel/process.c: idle_chain arch/x86_64/kernel/process.c idle_notifier drivers/base/memory.c: memory_chain drivers/cpufreq/cpufreq.c cpufreq_policy_notifier_list drivers/cpufreq/cpufreq.c cpufreq_transition_notifier_list drivers/macintosh/adb.c: adb_client_list drivers/macintosh/via-pmu.c sleep_notifier_list drivers/macintosh/via-pmu68k.c sleep_notifier_list drivers/macintosh/windfarm_core.c wf_client_list drivers/usb/core/notify.c usb_notifier_list drivers/video/fbmem.c fb_notifier_list kernel/cpu.c cpu_chain kernel/module.c module_notify_list kernel/profile.c munmap_notifier kernel/profile.c task_exit_notifier kernel/sys.c reboot_notifier_list net/core/dev.c netdev_chain net/decnet/dn_dev.c: dnaddr_chain net/ipv4/devinet.c: inetaddr_chain It's possible that some of these classifications are wrong. If they are, please let us know or submit a patch to fix them. Note that any chain that gets called very frequently should be atomic, because the rwsem read-locking used for blocking chains is very likely to incur cache misses on SMP systems. (However, if the chain's callout routines may sleep then the chain cannot be atomic.) The patch set was written by Alan Stern and Chandra Seetharaman, incorporating material written by Keith Owens and suggestions from Paul McKenney and Andrew Morton. [jes@sgi.com: restructure the notifier chain initialization macros] Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by: Jes Sorensen <jes@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-27 09:16:30 +00:00
int unregister_die_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_unregister(&i386die_chain, nb);
}
EXPORT_SYMBOL(unregister_die_notifier);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
{
return p > (void *)tinfo &&
p < (void *)tinfo + THREAD_SIZE - 3;
}
[PATCH] i386: multi-column stack backtraces Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:30 +00:00
/*
* Print CONFIG_STACK_BACKTRACE_COLS address/symbol entries per line.
*/
static inline int print_addr_and_symbol(unsigned long addr, char *log_lvl,
int printed)
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
{
[PATCH] i386: multi-column stack backtraces Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:30 +00:00
if (!printed)
printk(log_lvl);
#if CONFIG_STACK_BACKTRACE_COLS == 1
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
printk(" [<%08lx>] ", addr);
[PATCH] i386: multi-column stack backtraces Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:30 +00:00
#else
printk(" <%08lx> ", addr);
#endif
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
print_symbol("%s", addr);
[PATCH] i386: multi-column stack backtraces Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:30 +00:00
printed = (printed + 1) % CONFIG_STACK_BACKTRACE_COLS;
if (printed)
[PATCH] i386: remove junk from stack dump i386 stack dump has a "<0>" in the middle of the line and an extra space between columns in multicolumn mode. Remove those and also remove an extra blank line of source code. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-20 21:59:52 +00:00
printk(" ");
[PATCH] i386: multi-column stack backtraces Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:30 +00:00
else
printk("\n");
return printed;
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
static inline unsigned long print_context_stack(struct thread_info *tinfo,
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
unsigned long *stack, unsigned long ebp,
char *log_lvl)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
unsigned long addr;
[PATCH] i386: multi-column stack backtraces Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:30 +00:00
int printed = 0; /* nr of entries already printed on current line */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_FRAME_POINTER
while (valid_stack_ptr(tinfo, (void *)ebp)) {
addr = *(unsigned long *)(ebp + 4);
[PATCH] i386: multi-column stack backtraces Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:30 +00:00
printed = print_addr_and_symbol(addr, log_lvl, printed);
[PATCH] i386: break out of recursion in stackframe walk If CONFIG_FRAME_POINTERS is enabled, and one does a dump_stack() during early SMP init, an infinite stackdump and a bootup hang happens: [<c0104e7f>] show_trace+0xd/0xf [<c0104e96>] dump_stack+0x15/0x17 [<c01440df>] save_trace+0xc3/0xce [<c014527d>] mark_lock+0x8c/0x4fe [<c0145df5>] __lockdep_acquire+0x44e/0xaa5 [<c0146798>] lockdep_acquire+0x68/0x84 [<c1048699>] _spin_lock+0x21/0x2f [<c010d918>] prepare_set+0xd/0x5d [<c010daa8>] generic_set_all+0x1d/0x201 [<c010ca9a>] mtrr_ap_init+0x23/0x3b [<c010ada8>] identify_cpu+0x2a7/0x2af [<c01192a7>] smp_store_cpu_info+0x2f/0xb4 [<c01197d0>] start_secondary+0xb5/0x3ec [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [<c104ec11>] end_of_stack_stop_unwind_function+0x1/0x4 [...] Due to "end_of_stack_stop_unwind_function" recursing back to itself in the EBP stackframe-walker. So avoid this type of recursion when walking the stack . Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:04:20 +00:00
/*
* break out of recursive entries (such as
* end_of_stack_stop_unwind_function):
*/
if (ebp == *(unsigned long *)ebp)
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
ebp = *(unsigned long *)ebp;
}
#else
while (valid_stack_ptr(tinfo, stack)) {
addr = *stack++;
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
if (__kernel_text_address(addr))
[PATCH] i386: multi-column stack backtraces Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:30 +00:00
printed = print_addr_and_symbol(addr, log_lvl, printed);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif
[PATCH] i386: multi-column stack backtraces Print stack backtraces in multiple columns, saving screen space. Number of columns is configurable and defaults to one so behavior is backwards-compatible. Also removes the brackets around addresses when printing more that one entry per line so they print as: <address> instead of: [<address>] This helps multiple entries fit better on one line. Original idea by Dave Jones, taken from x86_64. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:30 +00:00
if (printed)
printk("\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return ebp;
}
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
static void show_trace_log_lvl(struct task_struct *task,
unsigned long *stack, char *log_lvl)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
unsigned long ebp;
if (!task)
task = current;
if (task == current) {
/* Grab ebp right from our regs */
asm ("movl %%ebp, %0" : "=r" (ebp) : );
} else {
/* ebp is the last reg pushed by switch_to */
ebp = *(unsigned long *) task->thread.esp;
}
while (1) {
struct thread_info *context;
context = (struct thread_info *)
((unsigned long)stack & (~(THREAD_SIZE - 1)));
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
ebp = print_context_stack(context, stack, ebp, log_lvl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
stack = (unsigned long*)context->previous_esp;
if (!stack)
break;
[PATCH] i386 traps: merge printk calls Merge a few printk calls in i386 traps. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:38 +00:00
printk("%s =======================\n", log_lvl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
}
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
void show_trace(struct task_struct *task, unsigned long * stack)
{
show_trace_log_lvl(task, stack, "");
}
static void show_stack_log_lvl(struct task_struct *task, unsigned long *esp,
char *log_lvl)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
unsigned long *stack;
int i;
if (esp == NULL) {
if (task)
esp = (unsigned long*)task->thread.esp;
else
esp = (unsigned long *)&esp;
}
stack = esp;
for(i = 0; i < kstack_depth_to_print; i++) {
if (kstack_end(stack))
break;
[PATCH] i386: fix dump_stack() i386 has a small bug in the stack dump code where it prints an extra log level code. Remove that and fix the alignment of normal stack dump printout. Also remove some unnecessary printk() calls. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:52 +00:00
if (i && ((i % 8) == 0))
printk("\n%s ", log_lvl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
printk("%08lx ", *stack++);
}
[PATCH] i386: fix dump_stack() i386 has a small bug in the stack dump code where it prints an extra log level code. Remove that and fix the alignment of normal stack dump printout. Also remove some unnecessary printk() calls. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:52 +00:00
printk("\n%sCall Trace:\n", log_lvl);
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
show_trace_log_lvl(task, esp, log_lvl);
}
void show_stack(struct task_struct *task, unsigned long *esp)
{
[PATCH] i386: fix dump_stack() i386 has a small bug in the stack dump code where it prints an extra log level code. Remove that and fix the alignment of normal stack dump printout. Also remove some unnecessary printk() calls. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:52 +00:00
printk(" ");
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
show_stack_log_lvl(task, esp, "");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
/*
* The architecture-independent dump_stack generator
*/
void dump_stack(void)
{
unsigned long stack;
show_trace(current, &stack);
}
EXPORT_SYMBOL(dump_stack);
void show_registers(struct pt_regs *regs)
{
int i;
int in_kernel = 1;
unsigned long esp;
unsigned short ss;
esp = (unsigned long) (&regs->esp);
[PATCH] x86: privilege cleanup Privilege checking cleanup. Originally, these diffs were much greater, but recent cleanups in Linux have already done much of the cleanup. I added some explanatory comments in places where the reasoning behind certain tests is rather subtle. Also, in traps.c, we can skip the user_mode check in handle_BUG(). The reason is, there are only two call chains - one via die_if_kernel() and one via do_page_fault(), both entering from die(). Both of these paths already ensure that a kernel mode failure has happened. Also, the original check here, if (user_mode(regs)) was insufficient anyways, since it would not rule out BUG faults from V8086 mode execution. Saving the %ss segment in show_regs() rather than assuming a fixed value also gives better information about the current kernel state in the register dump. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-03 22:56:43 +00:00
savesegment(ss, ss);
[PATCH] i386: fix uses of user_mode() vs. user_mode_vm() >commit 76381fee7e8feb4c22be636aa5d4765dbe4fbf9e >Author: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> >Date: Thu Jun 23 00:08:46 2005 -0700 > > [PATCH] xen: x86_64: use more usermode macro > > Make use of the user_mode macro where it's possible. This is useful for Xen > because it will need only to redefine only the macro to a hypervisor call. I am of the opinion that the above changeset is incomplete, i.e. it missed converting some previous uses of user_mode to user_mode_vm. While most of them could be considered just cosmetical, at least the one in die_nmi doesn't appear to be. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Zachary Amsden <zach@vmware.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:46 +00:00
if (user_mode_vm(regs)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
in_kernel = 0;
esp = regs->esp;
ss = regs->xss & 0xffff;
}
print_modules();
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "CPU: %d\nEIP: %04x:[<%08lx>] %s VLI\n"
[PATCH] i386: print kernel version in register dumps Show first field of kernel version in register dumps like x86_64 does. Changes output from e.g.: (2.6.16-rc1) to: (2.6.16-rc1 #12) Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05 07:28:04 +00:00
"EFLAGS: %08lx (%s %.*s) \n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
smp_processor_id(), 0xffff & regs->xcs, regs->eip,
[PATCH] i386: print kernel version in register dumps Show first field of kernel version in register dumps like x86_64 does. Changes output from e.g.: (2.6.16-rc1) to: (2.6.16-rc1 #12) Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-05 07:28:04 +00:00
print_tainted(), regs->eflags, system_utsname.release,
(int)strcspn(system_utsname.version, " "),
system_utsname.version);
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
print_symbol(KERN_EMERG "EIP is at %s\n", regs->eip);
printk(KERN_EMERG "eax: %08lx ebx: %08lx ecx: %08lx edx: %08lx\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
regs->eax, regs->ebx, regs->ecx, regs->edx);
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "esi: %08lx edi: %08lx ebp: %08lx esp: %08lx\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
regs->esi, regs->edi, regs->ebp, esp);
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "ds: %04x es: %04x ss: %04x\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
regs->xds & 0xffff, regs->xes & 0xffff, ss);
[PATCH] i386: extra checks in show_registers() Sometimes thread_info and task_struct get out-of-sync with each other. Printing task.thread_info in show_registers() can help spot this. And when task_struct is corrupt then task.comm can contain garbage, so only print as many characters as it can hold. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:04:31 +00:00
printk(KERN_EMERG "Process %.*s (pid: %d, ti=%p task=%p task.ti=%p)",
TASK_COMM_LEN, current->comm, current->pid,
current_thread_info(), current, current->thread_info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/*
* When in-kernel, we also print out the stack and code at the
* time of the fault..
*/
if (in_kernel) {
[PATCH] arch/i386/kernel/traps.c: fix sparse warnings Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:44 +00:00
u8 __user *eip;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk("\n" KERN_EMERG "Stack: ");
[PATCH] i386: fix stack dump loglevel Recent changes caused part of stack traces from SysRq-T to print at KERN_EMERG loglevel. Also, parts of stack dump during oops were failing to print at that level when they should. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-14 21:20:52 +00:00
show_stack_log_lvl(NULL, (unsigned long *)esp, KERN_EMERG);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "Code: ");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] arch/i386/kernel/traps.c: fix sparse warnings Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:44 +00:00
eip = (u8 __user *)regs->eip - 43;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
for (i = 0; i < 64; i++, eip++) {
unsigned char c;
[PATCH] arch/i386/kernel/traps.c: fix sparse warnings Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:44 +00:00
if (eip < (u8 __user *)PAGE_OFFSET || __get_user(c, eip)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
printk(" Bad EIP value.");
break;
}
[PATCH] arch/i386/kernel/traps.c: fix sparse warnings Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:44 +00:00
if (eip == (u8 __user *)regs->eip)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
printk("<%02x> ", c);
else
printk("%02x ", c);
}
}
printk("\n");
}
static void handle_BUG(struct pt_regs *regs)
{
unsigned short ud2;
unsigned short line;
char *file;
char c;
unsigned long eip;
eip = regs->eip;
if (eip < PAGE_OFFSET)
goto no_bug;
[PATCH] arch/i386/kernel/traps.c: fix sparse warnings Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:44 +00:00
if (__get_user(ud2, (unsigned short __user *)eip))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto no_bug;
if (ud2 != 0x0b0f)
goto no_bug;
[PATCH] arch/i386/kernel/traps.c: fix sparse warnings Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:44 +00:00
if (__get_user(line, (unsigned short __user *)(eip + 2)))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto bug;
[PATCH] arch/i386/kernel/traps.c: fix sparse warnings Signed-off-by: Alexey Dobriyan <adobriyan@mail.ru> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:44 +00:00
if (__get_user(file, (char * __user *)(eip + 4)) ||
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
(unsigned long)file < PAGE_OFFSET || __get_user(c, file))
file = "<bad filename>";
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "------------[ cut here ]------------\n");
printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
no_bug:
return;
/* Here we know it was a BUG but file-n-line is unavailable */
bug:
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "Kernel BUG\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] kdump: Use real pt_regs from exception Makes kexec_crashdump() take a pt_regs * as an argument. This allows to get exact register state at the point of the crash. If we come from direct panic assertion NULL will be passed and the current registers saved before crashdump. This hooks into two places: die(): check the conditions under which we will panic when calling do_exit and go there directly with the pt_regs that caused the fatal fault. die_nmi(): If we receive an NMI lockup while in the kernel use the pt_regs and go directly to crash_kexec(). We're probably nested up badly at this point so this might be the only chance to escape with proper information. Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:26 +00:00
/* This is gone through when something in the kernel
* has done something bad and is about to be terminated.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void die(const char * str, struct pt_regs * regs, long err)
{
static struct {
spinlock_t lock;
u32 lock_owner;
int lock_owner_depth;
} die = {
.lock = SPIN_LOCK_UNLOCKED,
.lock_owner = -1,
.lock_owner_depth = 0
};
static int die_counter;
[PATCH] i386: don't blindly enable interrupts in die() Rather than blindly re-enabling interrupts in die(), save their state upon entry and then restore that state. If the kernel is in really bad condition and faults with interrupts disabled, re-enabling them in die() may cause even more trouble, implying more chances of data corruption. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:11:48 +00:00
unsigned long flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] pause_on_oops command line option Attempt to fix the problem wherein people's oops reports scroll off the screen due to repeated oopsing or to oopses on other CPUs. If this happens the user can reboot with the `pause_on_oops=<seconds>' option. It will allow the first oopsing CPU to print an oops record just a single time. Second oopsing attempts, or oopses on other CPUs will cause those CPUs to enter a tight loop until the specified number of seconds have elapsed. The patch implements the infrastructure generically in the expectation that architectures other than x86 will find it useful. Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:57 +00:00
oops_enter();
[PATCH] smp_processor_id() cleanup This patch implements a number of smp_processor_id() cleanup ideas that Arjan van de Ven and I came up with. The previous __smp_processor_id/_smp_processor_id/smp_processor_id API spaghetti was hard to follow both on the implementational and on the usage side. Some of the complexity arose from picking wrong names, some of the complexity comes from the fact that not all architectures defined __smp_processor_id. In the new code, there are two externally visible symbols: - smp_processor_id(): debug variant. - raw_smp_processor_id(): nondebug variant. Replaces all existing uses of _smp_processor_id() and __smp_processor_id(). Defined by every SMP architecture in include/asm-*/smp.h. There is one new internal symbol, dependent on DEBUG_PREEMPT: - debug_smp_processor_id(): internal debug variant, mapped to smp_processor_id(). Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new lib/smp_processor_id.c file. All related comments got updated and/or clarified. I have build/boot tested the following 8 .config combinations on x86: {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT} I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT. (Other architectures are untested, but should work just fine.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-22 00:14:34 +00:00
if (die.lock_owner != raw_smp_processor_id()) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
console_verbose();
[PATCH] i386: don't blindly enable interrupts in die() Rather than blindly re-enabling interrupts in die(), save their state upon entry and then restore that state. If the kernel is in really bad condition and faults with interrupts disabled, re-enabling them in die() may cause even more trouble, implying more chances of data corruption. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:11:48 +00:00
spin_lock_irqsave(&die.lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
die.lock_owner = smp_processor_id();
die.lock_owner_depth = 0;
bust_spinlocks(1);
}
[PATCH] i386: don't blindly enable interrupts in die() Rather than blindly re-enabling interrupts in die(), save their state upon entry and then restore that state. If the kernel is in really bad condition and faults with interrupts disabled, re-enabling them in die() may cause even more trouble, implying more chances of data corruption. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:11:48 +00:00
else
local_save_flags(flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (++die.lock_owner_depth < 3) {
int nl = 0;
[PATCH] i386: print EIP/ESP last Print summary registers (EIP and SS:ESP only) as last death info. This makes this important data visible in case it had scrolled off the top of the display. Similar to what x86_64 does. Suggested by Andi Kleen. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 05:53:11 +00:00
unsigned long esp;
unsigned short ss;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
handle_BUG(regs);
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_PREEMPT
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "PREEMPT ");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
nl = 1;
#endif
#ifdef CONFIG_SMP
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
if (!nl)
printk(KERN_EMERG);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
printk("SMP ");
nl = 1;
#endif
#ifdef CONFIG_DEBUG_PAGEALLOC
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
if (!nl)
printk(KERN_EMERG);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
printk("DEBUG_PAGEALLOC");
nl = 1;
#endif
if (nl)
printk("\n");
[PATCH] i386: pass proper trap numbers to die chain handlers Pass the trap number causing the call to notify_die() to the die notification handler chain in a number of instances. Also, honor the return value from the handler chain invocation in die() as, through a debugger, the fault may have been fixed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-By: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 09:37:01 +00:00
if (notify_die(DIE_OOPS, str, regs, err,
current->thread.trap_no, SIGSEGV) !=
[PATCH] i386: print EIP/ESP last Print summary registers (EIP and SS:ESP only) as last death info. This makes this important data visible in case it had scrolled off the top of the display. Similar to what x86_64 does. Suggested by Andi Kleen. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 05:53:11 +00:00
NOTIFY_STOP) {
[PATCH] i386: pass proper trap numbers to die chain handlers Pass the trap number causing the call to notify_die() to the die notification handler chain in a number of instances. Also, honor the return value from the handler chain invocation in die() as, through a debugger, the fault may have been fixed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-By: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 09:37:01 +00:00
show_registers(regs);
[PATCH] i386: print EIP/ESP last Print summary registers (EIP and SS:ESP only) as last death info. This makes this important data visible in case it had scrolled off the top of the display. Similar to what x86_64 does. Suggested by Andi Kleen. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-04-11 05:53:11 +00:00
/* Executive summary in case the oops scrolled away */
esp = (unsigned long) (&regs->esp);
savesegment(ss, ss);
if (user_mode(regs)) {
esp = regs->esp;
ss = regs->xss & 0xffff;
}
printk(KERN_EMERG "EIP: [<%08lx>] ", regs->eip);
print_symbol("%s", regs->eip);
printk(" SS:ESP %04x:%08lx\n", ss, esp);
}
[PATCH] i386: pass proper trap numbers to die chain handlers Pass the trap number causing the call to notify_die() to the die notification handler chain in a number of instances. Also, honor the return value from the handler chain invocation in die() as, through a debugger, the fault may have been fixed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-By: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 09:37:01 +00:00
else
regs = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
} else
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "Recursive die() failure, output suppressed\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
bust_spinlocks(0);
die.lock_owner = -1;
[PATCH] i386: don't blindly enable interrupts in die() Rather than blindly re-enabling interrupts in die(), save their state upon entry and then restore that state. If the kernel is in really bad condition and faults with interrupts disabled, re-enabling them in die() may cause even more trouble, implying more chances of data corruption. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:11:48 +00:00
spin_unlock_irqrestore(&die.lock, flags);
[PATCH] kdump: Use real pt_regs from exception Makes kexec_crashdump() take a pt_regs * as an argument. This allows to get exact register state at the point of the crash. If we come from direct panic assertion NULL will be passed and the current registers saved before crashdump. This hooks into two places: die(): check the conditions under which we will panic when calling do_exit and go there directly with the pt_regs that caused the fatal fault. die_nmi(): If we receive an NMI lockup while in the kernel use the pt_regs and go directly to crash_kexec(). We're probably nested up badly at this point so this might be the only chance to escape with proper information. Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:26 +00:00
[PATCH] i386: pass proper trap numbers to die chain handlers Pass the trap number causing the call to notify_die() to the die notification handler chain in a number of instances. Also, honor the return value from the handler chain invocation in die() as, through a debugger, the fault may have been fixed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-By: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 09:37:01 +00:00
if (!regs)
return;
[PATCH] kdump: Use real pt_regs from exception Makes kexec_crashdump() take a pt_regs * as an argument. This allows to get exact register state at the point of the crash. If we come from direct panic assertion NULL will be passed and the current registers saved before crashdump. This hooks into two places: die(): check the conditions under which we will panic when calling do_exit and go there directly with the pt_regs that caused the fatal fault. die_nmi(): If we receive an NMI lockup while in the kernel use the pt_regs and go directly to crash_kexec(). We're probably nested up badly at this point so this might be the only chance to escape with proper information. Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:26 +00:00
if (kexec_should_crash(current))
crash_kexec(regs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops) {
printk(KERN_EMERG "Fatal exception: panic in 5 seconds\n");
ssleep(5);
panic("Fatal exception");
}
[PATCH] pause_on_oops command line option Attempt to fix the problem wherein people's oops reports scroll off the screen due to repeated oopsing or to oopses on other CPUs. If this happens the user can reboot with the `pause_on_oops=<seconds>' option. It will allow the first oopsing CPU to print an oops record just a single time. Second oopsing attempts, or oopses on other CPUs will cause those CPUs to enter a tight loop until the specified number of seconds have elapsed. The patch implements the infrastructure generically in the expectation that architectures other than x86 will find it useful. Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 11:00:57 +00:00
oops_exit();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
do_exit(SIGSEGV);
}
static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err)
{
[PATCH] xen: x86: Use more usermode macro Use the user_mode macro where it's possible. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:08:45 +00:00
if (!user_mode_vm(regs))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
die(str, regs, err);
}
[PATCH] kprobes: prevent possible race conditions i386 changes This patch contains the i386 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 22:19:27 +00:00
static void __kprobes do_trap(int trapnr, int signr, char *str, int vm86,
struct pt_regs * regs, long error_code,
siginfo_t *info)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
[PATCH] kdump: Save trap information for later analysis If we are faulting in kernel it is quite possible this will lead to a panic. Save trap number, cr2 (in case of page fault) and error_code in the current thread (these fields already exist for signal delivery but are not used here). This helps later kdump crash analyzing from user-space (a script has been submitted to dig this info out in gdb). Signed-off-by: Alexander Nyberg <alexn@telia.com> Cc: <fastboot@lists.osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:27 +00:00
struct task_struct *tsk = current;
tsk->thread.error_code = error_code;
tsk->thread.trap_no = trapnr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (regs->eflags & VM_MASK) {
if (vm86)
goto vm86_trap;
goto trap_signal;
}
[PATCH] xen: x86: Use more usermode macro Use the user_mode macro where it's possible. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:08:45 +00:00
if (!user_mode(regs))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto kernel_trap;
trap_signal: {
if (info)
force_sig_info(signr, info, tsk);
else
force_sig(signr, tsk);
return;
}
kernel_trap: {
if (!fixup_exception(regs))
die(str, regs, error_code);
return;
}
vm86_trap: {
int ret = handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, trapnr);
if (ret) goto trap_signal;
return;
}
}
#define DO_ERROR(trapnr, signr, str, name) \
fastcall void do_##name(struct pt_regs * regs, long error_code) \
{ \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \
do_trap(trapnr, signr, str, 0, regs, error_code, NULL); \
}
#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
fastcall void do_##name(struct pt_regs * regs, long error_code) \
{ \
siginfo_t info; \
info.si_signo = signr; \
info.si_errno = 0; \
info.si_code = sicode; \
info.si_addr = (void __user *)siaddr; \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \
do_trap(trapnr, signr, str, 0, regs, error_code, &info); \
}
#define DO_VM86_ERROR(trapnr, signr, str, name) \
fastcall void do_##name(struct pt_regs * regs, long error_code) \
{ \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \
do_trap(trapnr, signr, str, 1, regs, error_code, NULL); \
}
#define DO_VM86_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
fastcall void do_##name(struct pt_regs * regs, long error_code) \
{ \
siginfo_t info; \
info.si_signo = signr; \
info.si_errno = 0; \
info.si_code = sicode; \
info.si_addr = (void __user *)siaddr; \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \
do_trap(trapnr, signr, str, 1, regs, error_code, &info); \
}
DO_VM86_ERROR_INFO( 0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->eip)
#ifndef CONFIG_KPROBES
DO_VM86_ERROR( 3, SIGTRAP, "int3", int3)
#endif
DO_VM86_ERROR( 4, SIGSEGV, "overflow", overflow)
DO_VM86_ERROR( 5, SIGSEGV, "bounds", bounds)
[PATCH] i386: "invalid operand" -> "invalid opcode" According to the manual, INT 6 is "invalid opcode", not "invalid operand". Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-04 03:36:14 +00:00
DO_ERROR_INFO( 6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->eip)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
DO_ERROR( 9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
x86: make traps on 'iret' be debuggable in user space This makes a trap on the 'iret' that returns us to user space cause a nice clean SIGSEGV, instead of just a hard (and silent) exit. That way a debugger can actually try to see what happened, and we also properly notify everybody who might be interested about us being gone. This loses the error code, but tells the debugger what happened with ILL_BADSTK in the siginfo.
2005-04-29 16:38:44 +00:00
DO_ERROR_INFO(32, SIGSEGV, "iret exception", iret_error, ILL_BADSTK, 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
[PATCH] kprobes: prevent possible race conditions i386 changes This patch contains the i386 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 22:19:27 +00:00
fastcall void __kprobes do_general_protection(struct pt_regs * regs,
long error_code)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
int cpu = get_cpu();
struct tss_struct *tss = &per_cpu(init_tss, cpu);
struct thread_struct *thread = &current->thread;
/*
* Perform the lazy TSS's I/O bitmap copy. If the TSS has an
* invalid offset set (the LAZY one) and the faulting thread has
* a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS
* and we set the offset field correctly. Then we let the CPU to
* restart the faulting instruction.
*/
if (tss->io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY &&
thread->io_bitmap_ptr) {
memcpy(tss->io_bitmap, thread->io_bitmap_ptr,
thread->io_bitmap_max);
/*
* If the previously set map was extending to higher ports
* than the current one, pad extra space with 0xff (no access).
*/
if (thread->io_bitmap_max < tss->io_bitmap_max)
memset((char *) tss->io_bitmap +
thread->io_bitmap_max, 0xff,
tss->io_bitmap_max - thread->io_bitmap_max);
tss->io_bitmap_max = thread->io_bitmap_max;
tss->io_bitmap_base = IO_BITMAP_OFFSET;
[PATCH] x86: initialise tss->io_bitmap_owner to something There exists a field io_bitmap_owner in the TSS that is only checked, but never set to anything else but NULL. Signed-off-by: Bart Oldeman <bartoldeman@users.sourceforge.net> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30 22:59:29 +00:00
tss->io_bitmap_owner = thread;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
put_cpu();
return;
}
put_cpu();
[PATCH] kdump: Save trap information for later analysis If we are faulting in kernel it is quite possible this will lead to a panic. Save trap number, cr2 (in case of page fault) and error_code in the current thread (these fields already exist for signal delivery but are not used here). This helps later kdump crash analyzing from user-space (a script has been submitted to dig this info out in gdb). Signed-off-by: Alexander Nyberg <alexn@telia.com> Cc: <fastboot@lists.osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:27 +00:00
current->thread.error_code = error_code;
current->thread.trap_no = 13;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (regs->eflags & VM_MASK)
goto gp_in_vm86;
[PATCH] xen: x86: Use more usermode macro Use the user_mode macro where it's possible. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:08:45 +00:00
if (!user_mode(regs))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto gp_in_kernel;
current->thread.error_code = error_code;
current->thread.trap_no = 13;
force_sig(SIGSEGV, current);
return;
gp_in_vm86:
local_irq_enable();
handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
return;
gp_in_kernel:
if (!fixup_exception(regs)) {
if (notify_die(DIE_GPF, "general protection fault", regs,
error_code, 13, SIGSEGV) == NOTIFY_STOP)
return;
die("general protection fault", regs, error_code);
}
}
static void mem_parity_error(unsigned char reason, struct pt_regs * regs)
{
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "Uhhuh. NMI received. Dazed and confused, but trying "
"to continue\n");
printk(KERN_EMERG "You probably have a hardware problem with your RAM "
"chips\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* Clear and disable the memory parity error line. */
clear_mem_error(reason);
}
static void io_check_error(unsigned char reason, struct pt_regs * regs)
{
unsigned long i;
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
show_registers(regs);
/* Re-enable the IOCK line, wait for a few seconds */
reason = (reason & 0xf) | 8;
outb(reason, 0x61);
i = 2000;
while (--i) udelay(1000);
reason &= ~8;
outb(reason, 0x61);
}
static void unknown_nmi_error(unsigned char reason, struct pt_regs * regs)
{
#ifdef CONFIG_MCA
/* Might actually be able to figure out what the guilty party
* is. */
if( MCA_bus ) {
mca_handle_nmi();
return;
}
#endif
printk("Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
reason, smp_processor_id());
printk("Dazed and confused, but trying to continue\n");
printk("Do you have a strange power saving mode enabled?\n");
}
static DEFINE_SPINLOCK(nmi_print_lock);
void die_nmi (struct pt_regs *regs, const char *msg)
{
[PATCH] i386: pass proper trap numbers to die chain handlers Pass the trap number causing the call to notify_die() to the die notification handler chain in a number of instances. Also, honor the return value from the handler chain invocation in die() as, through a debugger, the fault may have been fixed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-By: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 09:37:01 +00:00
if (notify_die(DIE_NMIWATCHDOG, msg, regs, 0, 2, SIGINT) ==
[PATCH] x86 NMI: better support for debuggers This patch adds a notify to the die_nmi notify that the system is about to be taken down. If the notify is handled with a NOTIFY_STOP return, the system is given a new lease on life. We also change the nmi watchdog to carry on if die_nmi returns. This give debug code a chance to a) catch watchdog timeouts and b) possibly allow the system to continue, realizing that the time out may be due to debugger activities such as single stepping which is usually done with "other" cpus held. Signed-off-by: George Anzinger<george@mvista.com> Cc: Keith Owens <kaos@ocs.com.au> Signed-off-by: George Anzinger <george@mvista.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-03 22:56:48 +00:00
NOTIFY_STOP)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
spin_lock(&nmi_print_lock);
/*
* We are in trouble anyway, lets at least try
* to get a message out.
*/
bust_spinlocks(1);
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "%s", msg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
printk(" on CPU%d, eip %08lx, registers:\n",
smp_processor_id(), regs->eip);
show_registers(regs);
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "console shuts up ...\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
console_silent();
spin_unlock(&nmi_print_lock);
bust_spinlocks(0);
[PATCH] kdump: Use real pt_regs from exception Makes kexec_crashdump() take a pt_regs * as an argument. This allows to get exact register state at the point of the crash. If we come from direct panic assertion NULL will be passed and the current registers saved before crashdump. This hooks into two places: die(): check the conditions under which we will panic when calling do_exit and go there directly with the pt_regs that caused the fatal fault. die_nmi(): If we receive an NMI lockup while in the kernel use the pt_regs and go directly to crash_kexec(). We're probably nested up badly at this point so this might be the only chance to escape with proper information. Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:26 +00:00
/* If we are in kernel we are probably nested up pretty bad
* and might aswell get out now while we still can.
*/
[PATCH] i386: fix uses of user_mode() vs. user_mode_vm() >commit 76381fee7e8feb4c22be636aa5d4765dbe4fbf9e >Author: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> >Date: Thu Jun 23 00:08:46 2005 -0700 > > [PATCH] xen: x86_64: use more usermode macro > > Make use of the user_mode macro where it's possible. This is useful for Xen > because it will need only to redefine only the macro to a hypervisor call. I am of the opinion that the above changeset is incomplete, i.e. it missed converting some previous uses of user_mode to user_mode_vm. While most of them could be considered just cosmetical, at least the one in die_nmi doesn't appear to be. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Zachary Amsden <zach@vmware.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:46 +00:00
if (!user_mode_vm(regs)) {
[PATCH] kdump: Use real pt_regs from exception Makes kexec_crashdump() take a pt_regs * as an argument. This allows to get exact register state at the point of the crash. If we come from direct panic assertion NULL will be passed and the current registers saved before crashdump. This hooks into two places: die(): check the conditions under which we will panic when calling do_exit and go there directly with the pt_regs that caused the fatal fault. die_nmi(): If we receive an NMI lockup while in the kernel use the pt_regs and go directly to crash_kexec(). We're probably nested up badly at this point so this might be the only chance to escape with proper information. Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:26 +00:00
current->thread.trap_no = 2;
crash_kexec(regs);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
do_exit(SIGSEGV);
}
static void default_do_nmi(struct pt_regs * regs)
{
unsigned char reason = 0;
/* Only the BSP gets external NMIs from the system. */
if (!smp_processor_id())
reason = get_nmi_reason();
if (!(reason & 0xc0)) {
[PATCH] i386: pass proper trap numbers to die chain handlers Pass the trap number causing the call to notify_die() to the die notification handler chain in a number of instances. Also, honor the return value from the handler chain invocation in die() as, through a debugger, the fault may have been fixed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-By: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 09:37:01 +00:00
if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
== NOTIFY_STOP)
return;
#ifdef CONFIG_X86_LOCAL_APIC
/*
* Ok, so this is none of the documented NMI sources,
* so it must be the NMI watchdog.
*/
if (nmi_watchdog) {
nmi_watchdog_tick(regs);
return;
}
#endif
unknown_nmi_error(reason, regs);
return;
}
[PATCH] i386: pass proper trap numbers to die chain handlers Pass the trap number causing the call to notify_die() to the die notification handler chain in a number of instances. Also, honor the return value from the handler chain invocation in die() as, through a debugger, the fault may have been fixed. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-By: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-26 09:37:01 +00:00
if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
if (reason & 0x80)
mem_parity_error(reason, regs);
if (reason & 0x40)
io_check_error(reason, regs);
/*
* Reassert NMI in case it became active meanwhile
* as it's edge-triggered.
*/
reassert_nmi();
}
static int dummy_nmi_callback(struct pt_regs * regs, int cpu)
{
return 0;
}
static nmi_callback_t nmi_callback = dummy_nmi_callback;
fastcall void do_nmi(struct pt_regs * regs, long error_code)
{
int cpu;
nmi_enter();
cpu = smp_processor_id();
[PATCH] i386 CPU hotplug (The i386 CPU hotplug patch provides infrastructure for some work which Pavel is doing as well as for ACPI S3 (suspend-to-RAM) work which Li Shaohua <shaohua.li@intel.com> is doing) The following provides i386 architecture support for safely unregistering and registering processors during runtime, updated for the current -mm tree. In order to avoid dumping cpu hotplug code into kernel/irq/* i dropped the cpu_online check in do_IRQ() by modifying fixup_irqs(). The difference being that on cpu offline, fixup_irqs() is called before we clear the cpu from cpu_online_map and a long delay in order to ensure that we never have any queued external interrupts on the APICs. There are additional changes to s390 and ppc64 to account for this change. 1) Add CONFIG_HOTPLUG_CPU 2) disable local APIC timer on dead cpus. 3) Disable preempt around irq balancing to prevent CPUs going down. 4) Print irq stats for all possible cpus. 5) Debugging check for interrupts on offline cpus. 6) Hacky fixup_irqs() to redirect irqs when cpus go off/online. 7) play_dead() for offline cpus to spin inside. 8) Handle offline cpus set in flush_tlb_others(). 9) Grab lock earlier in smp_call_function() to prevent CPUs going down. 10) Implement __cpu_disable() and __cpu_die(). 11) Enable local interrupts in cpu_enable() after fixup_irqs() 12) Don't fiddle with NMI on dead cpu, but leave intact on other cpus. 13) Program IRQ affinity whilst cpu is still in cpu_online_map on offline. Signed-off-by: Zwane Mwaikambo <zwane@linuxpower.ca> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:54:50 +00:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
++nmi_count(cpu);
[PATCH] NMI: Update NMI users of RCU to use new API Uses of RCU for dynamically changeable NMI handlers need to use the new rcu_dereference() and rcu_assign_pointer() facilities. This change makes it clear that these uses are safe from a memory-barrier viewpoint, but the main purpose is to document exactly what operations are being protected by RCU. This has been tested on x86 and x86-64, which are the only architectures affected by this change. Signed-off-by: <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 22:16:35 +00:00
if (!rcu_dereference(nmi_callback)(regs, cpu))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
default_do_nmi(regs);
nmi_exit();
}
void set_nmi_callback(nmi_callback_t callback)
{
[PATCH] i386: actively synchronize vmalloc area when registering certain callbacks Registering a callback handler through register_die_notifier() is obviously primarily intended for use by modules. However, the way these currently get called it is basically impossible for them to actually be used by modules, as there is, on non-PAE configurationes, a good chance (the larger the module, the better) for the system to crash as a result. This is because the callback gets invoked (a) in the page fault path before the top level page table propagation gets carried out (hence a fault to propagate the top level page table entry/entries mapping to module's code/data would nest infinitly) and (b) in the NMI path, where nested faults must absolutely not happen, since otherwise the IRET from the nested fault re-enables NMIs, potentially resulting in nested NMI occurences. Besides the modular aspect, similar problems would even arise for in- kernel consumers of the API if they touched ioremap()ed or vmalloc()ed memory inside their handlers. Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 10:59:45 +00:00
vmalloc_sync_all();
[PATCH] NMI: Update NMI users of RCU to use new API Uses of RCU for dynamically changeable NMI handlers need to use the new rcu_dereference() and rcu_assign_pointer() facilities. This change makes it clear that these uses are safe from a memory-barrier viewpoint, but the main purpose is to document exactly what operations are being protected by RCU. This has been tested on x86 and x86-64, which are the only architectures affected by this change. Signed-off-by: <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 22:16:35 +00:00
rcu_assign_pointer(nmi_callback, callback);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
[PATCH] Remove i386_ksyms.c, almost. * EXPORT_SYMBOL's moved to other files * #include <linux/config.h>, <linux/module.h> where needed * #include's in i386_ksyms.c cleaned up * After copy-paste, redundant due to Makefiles rules preprocessor directives removed: #ifdef CONFIG_FOO EXPORT_SYMBOL(foo); #endif obj-$(CONFIG_FOO) += foo.o * Tiny reformat to fit in 80 columns Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:08:33 +00:00
EXPORT_SYMBOL_GPL(set_nmi_callback);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
void unset_nmi_callback(void)
{
nmi_callback = dummy_nmi_callback;
}
[PATCH] Remove i386_ksyms.c, almost. * EXPORT_SYMBOL's moved to other files * #include <linux/config.h>, <linux/module.h> where needed * #include's in i386_ksyms.c cleaned up * After copy-paste, redundant due to Makefiles rules preprocessor directives removed: #ifdef CONFIG_FOO EXPORT_SYMBOL(foo); #endif obj-$(CONFIG_FOO) += foo.o * Tiny reformat to fit in 80 columns Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:08:33 +00:00
EXPORT_SYMBOL_GPL(unset_nmi_callback);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
#ifdef CONFIG_KPROBES
[PATCH] kprobes: prevent possible race conditions i386 changes This patch contains the i386 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 22:19:27 +00:00
fastcall void __kprobes do_int3(struct pt_regs *regs, long error_code)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
== NOTIFY_STOP)
[PATCH] x86: entry.S trap return fixes do_debug() and do_int3() return void. This patch fixes the CONFIG_KPROBES variant of do_int3() to return void too and adjusts entry.S accordingly. Signed-off-by: Stas Sergeev <stsp@aknet.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 15:58:49 +00:00
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
/* This is an interrupt gate, because kprobes wants interrupts
disabled. Normal trap handlers don't. */
restore_interrupts(regs);
do_trap(3, SIGTRAP, "int3", 1, regs, error_code, NULL);
}
#endif
/*
* Our handling of the processor debug registers is non-trivial.
* We do not clear them on entry and exit from the kernel. Therefore
* it is possible to get a watchpoint trap here from inside the kernel.
* However, the code in ./ptrace.c has ensured that the user can
* only set watchpoints on userspace addresses. Therefore the in-kernel
* watchpoint trap can only occur in code which is reading/writing
* from user space. Such code must not hold kernel locks (since it
* can equally take a page fault), therefore it is safe to call
* force_sig_info even though that claims and releases locks.
*
* Code in ./signal.c ensures that the debug control register
* is restored before we deliver any signal, and therefore that
* user code runs with the correct debug control register even though
* we clear it here.
*
* Being careful here means that we don't have to be as careful in a
* lot of more complicated places (task switching can be a bit lazy
* about restoring all the debug state, and ptrace doesn't have to
* find every occurrence of the TF bit that could be saved away even
* by user code)
*/
[PATCH] kprobes: prevent possible race conditions i386 changes This patch contains the i386 architecture specific changes to prevent the possible race conditions. Signed-off-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-06 22:19:27 +00:00
fastcall void __kprobes do_debug(struct pt_regs * regs, long error_code)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
{
unsigned int condition;
struct task_struct *tsk = current;
[PATCH] xen: x86: Use new macro for debugreg Make use of the 2 new macro set_debugreg and get_debugreg. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:08:43 +00:00
get_debugreg(condition, 6);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code,
SIGTRAP) == NOTIFY_STOP)
return;
/* It's safe to allow irq's after DR6 has been saved */
if (regs->eflags & X86_EFLAGS_IF)
local_irq_enable();
/* Mask out spurious debug traps due to lazy DR7 setting */
if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) {
if (!tsk->thread.debugreg[7])
goto clear_dr7;
}
if (regs->eflags & VM_MASK)
goto debug_vm86;
/* Save debug status register where ptrace can see it */
tsk->thread.debugreg[6] = condition;
/*
* Single-stepping through TF: make sure we ignore any events in
* kernel space (but re-enable TF when returning to user mode).
*/
if (condition & DR_STEP) {
/*
* We already checked v86 mode above, so we can
* check for kernel mode by just checking the CPL
* of CS.
*/
[PATCH] xen: x86: Use more usermode macro Use the user_mode macro where it's possible. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:08:45 +00:00
if (!user_mode(regs))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
goto clear_TF_reenable;
}
/* Ok, finally something we can handle */
send_sigtrap(tsk, regs, error_code);
/* Disable additional traps. They'll be re-enabled when
* the signal is delivered.
*/
clear_dr7:
[PATCH] xen: x86: Use new macro for debugreg Make use of the 2 new macro set_debugreg and get_debugreg. Signed-off-by: Vincent Hanquez <vincent.hanquez@cl.cam.ac.uk> Cc: Ian Pratt <m+Ian.Pratt@cl.cam.ac.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 07:08:43 +00:00
set_debugreg(0, 7);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
return;
debug_vm86:
handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1);
return;
clear_TF_reenable:
set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
regs->eflags &= ~TF_MASK;
return;
}
/*
* Note that we play around with the 'TS' bit in an attempt to get
* the correct behaviour even in the presence of the asynchronous
* IRQ13 behaviour
*/
void math_error(void __user *eip)
{
struct task_struct * task;
siginfo_t info;
unsigned short cwd, swd;
/*
* Save the info for the exception handler and clear the error.
*/
task = current;
save_init_fpu(task);
task->thread.trap_no = 16;
task->thread.error_code = 0;
info.si_signo = SIGFPE;
info.si_errno = 0;
info.si_code = __SI_FAULT;
info.si_addr = eip;
/*
* (~cwd & swd) will mask out exceptions that are not set to unmasked
* status. 0x3f is the exception bits in these regs, 0x200 is the
* C1 reg you need in case of a stack fault, 0x040 is the stack
* fault bit. We should only be taking one exception at a time,
* so if this combination doesn't produce any single exception,
* then we have a bad program that isn't syncronizing its FPU usage
* and it will suffer the consequences since we won't be able to
* fully reproduce the context of the exception
*/
cwd = get_fpu_cwd(task);
swd = get_fpu_swd(task);
[PATCH] i386: fix incorrect FP signal code i386 floating-point exception handling has a bug that can cause error code 0 to be sent instead of the proper code during signal delivery. This is caused by unconditionally checking the IS and c1 bits from the FPU status word when they are not always relevant. The IS bit tells whether an exception is a stack fault and is only relevant when the exception is IE (invalid operation.) The C1 bit determines whether a stack fault is overflow or underflow and is only relevant when IS and IE are set. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-24 01:36:40 +00:00
switch (swd & ~cwd & 0x3f) {
[PATCH] i386: Ignore masked FPU exceptions Masked FPU exceptions should obviously not happen in the first place, but if they do, ignoring them seems to be the right thing to do. Although there is no documentation available for Cyrix MII, I did find erratum F-7 for Winchip C6, "FPU instruction may result in spurious exception under certain conditions" which seems to indicate that this can happen. That would also explain the behaviour Ondrej Zary reported on the MII. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-13 08:55:41 +00:00
case 0x000: /* No unmasked exception */
return;
default: /* Multiple exceptions */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
break;
case 0x001: /* Invalid Op */
[PATCH] i386: fix incorrect FP signal code i386 floating-point exception handling has a bug that can cause error code 0 to be sent instead of the proper code during signal delivery. This is caused by unconditionally checking the IS and c1 bits from the FPU status word when they are not always relevant. The IS bit tells whether an exception is a stack fault and is only relevant when the exception is IE (invalid operation.) The C1 bit determines whether a stack fault is overflow or underflow and is only relevant when IS and IE are set. Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-24 01:36:40 +00:00
/*
* swd & 0x240 == 0x040: Stack Underflow
* swd & 0x240 == 0x240: Stack Overflow
* User must clear the SF bit (0x40) if set
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
info.si_code = FPE_FLTINV;
break;
case 0x002: /* Denormalize */
case 0x010: /* Underflow */
info.si_code = FPE_FLTUND;
break;
case 0x004: /* Zero Divide */
info.si_code = FPE_FLTDIV;
break;
case 0x008: /* Overflow */
info.si_code = FPE_FLTOVF;
break;
case 0x020: /* Precision */
info.si_code = FPE_FLTRES;
break;
}
force_sig_info(SIGFPE, &info, task);
}
fastcall void do_coprocessor_error(struct pt_regs * regs, long error_code)
{
ignore_fpu_irq = 1;
math_error((void __user *)regs->eip);
}
static void simd_math_error(void __user *eip)
{
struct task_struct * task;
siginfo_t info;
unsigned short mxcsr;
/*
* Save the info for the exception handler and clear the error.
*/
task = current;
save_init_fpu(task);
task->thread.trap_no = 19;
task->thread.error_code = 0;
info.si_signo = SIGFPE;
info.si_errno = 0;
info.si_code = __SI_FAULT;
info.si_addr = eip;
/*
* The SIMD FPU exceptions are handled a little differently, as there
* is only a single status/control register. Thus, to determine which
* unmasked exception was caught we must mask the exception mask bits
* at 0x1f80, and then use these to mask the exception bits at 0x3f.
*/
mxcsr = get_fpu_mxcsr(task);
switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
case 0x000:
default:
break;
case 0x001: /* Invalid Op */
info.si_code = FPE_FLTINV;
break;
case 0x002: /* Denormalize */
case 0x010: /* Underflow */
info.si_code = FPE_FLTUND;
break;
case 0x004: /* Zero Divide */
info.si_code = FPE_FLTDIV;
break;
case 0x008: /* Overflow */
info.si_code = FPE_FLTOVF;
break;
case 0x020: /* Precision */
info.si_code = FPE_FLTRES;
break;
}
force_sig_info(SIGFPE, &info, task);
}
fastcall void do_simd_coprocessor_error(struct pt_regs * regs,
long error_code)
{
if (cpu_has_xmm) {
/* Handle SIMD FPU exceptions on PIII+ processors. */
ignore_fpu_irq = 1;
simd_math_error((void __user *)regs->eip);
} else {
/*
* Handle strange cache flush from user space exception
* in all other cases. This is undocumented behaviour.
*/
if (regs->eflags & VM_MASK) {
handle_vm86_fault((struct kernel_vm86_regs *)regs,
error_code);
return;
}
current->thread.trap_no = 19;
current->thread.error_code = error_code;
[PATCH] kdump: Save trap information for later analysis If we are faulting in kernel it is quite possible this will lead to a panic. Save trap number, cr2 (in case of page fault) and error_code in the current thread (these fields already exist for signal delivery but are not used here). This helps later kdump crash analyzing from user-space (a script has been submitted to dig this info out in gdb). Signed-off-by: Alexander Nyberg <alexn@telia.com> Cc: <fastboot@lists.osdl.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25 21:58:27 +00:00
die_if_kernel("cache flush denied", regs, error_code);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
force_sig(SIGSEGV, current);
}
}
fastcall void do_spurious_interrupt_bug(struct pt_regs * regs,
long error_code)
{
#if 0
/* No need to warn about this any longer. */
printk("Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
#endif
}
fastcall void setup_x86_bogus_stack(unsigned char * stk)
{
unsigned long *switch16_ptr, *switch32_ptr;
struct pt_regs *regs;
unsigned long stack_top, stack_bot;
unsigned short iret_frame16_off;
int cpu = smp_processor_id();
/* reserve the space on 32bit stack for the magic switch16 pointer */
memmove(stk, stk + 8, sizeof(struct pt_regs));
switch16_ptr = (unsigned long *)(stk + sizeof(struct pt_regs));
regs = (struct pt_regs *)stk;
/* now the switch32 on 16bit stack */
stack_bot = (unsigned long)&per_cpu(cpu_16bit_stack, cpu);
stack_top = stack_bot + CPU_16BIT_STACK_SIZE;
switch32_ptr = (unsigned long *)(stack_top - 8);
iret_frame16_off = CPU_16BIT_STACK_SIZE - 8 - 20;
/* copy iret frame on 16bit stack */
memcpy((void *)(stack_bot + iret_frame16_off), &regs->eip, 20);
/* fill in the switch pointers */
switch16_ptr[0] = (regs->esp & 0xffff0000) | iret_frame16_off;
switch16_ptr[1] = __ESPFIX_SS;
switch32_ptr[0] = (unsigned long)stk + sizeof(struct pt_regs) +
8 - CPU_16BIT_STACK_SIZE;
switch32_ptr[1] = __KERNEL_DS;
}
fastcall unsigned char * fixup_x86_bogus_stack(unsigned short sp)
{
unsigned long *switch32_ptr;
unsigned char *stack16, *stack32;
unsigned long stack_top, stack_bot;
int len;
int cpu = smp_processor_id();
stack_bot = (unsigned long)&per_cpu(cpu_16bit_stack, cpu);
stack_top = stack_bot + CPU_16BIT_STACK_SIZE;
switch32_ptr = (unsigned long *)(stack_top - 8);
/* copy the data from 16bit stack to 32bit stack */
len = CPU_16BIT_STACK_SIZE - 8 - sp;
stack16 = (unsigned char *)(stack_bot + sp);
stack32 = (unsigned char *)
(switch32_ptr[0] + CPU_16BIT_STACK_SIZE - 8 - len);
memcpy(stack32, stack16, len);
return stack32;
}
/*
* 'math_state_restore()' saves the current math information in the
* old math state array, and gets the new ones from the current task
*
* Careful.. There are problems with IBM-designed IRQ13 behaviour.
* Don't touch unless you *really* know how it works.
*
* Must be called with kernel preemption disabled (in this case,
* local interrupts are disabled at the call-site in entry.S).
*/
asmlinkage void math_state_restore(struct pt_regs regs)
{
struct thread_info *thread = current_thread_info();
struct task_struct *tsk = thread->task;
clts(); /* Allow maths ops (or we recurse) */
if (!tsk_used_math(tsk))
init_fpu(tsk);
restore_fpu(tsk);
thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
}
#ifndef CONFIG_MATH_EMULATION
asmlinkage void math_emulate(long arg)
{
[PATCH] printk levels for i386 oops code. Especially useful when users have booted with 'quiet'. In the regular 'oops' path, we set the console_loglevel before we start spewing debug info, but we can call the backtrace code from other places now too, such as the spinlock debugging code. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 04:51:32 +00:00
printk(KERN_EMERG "math-emulation not enabled and no coprocessor found.\n");
printk(KERN_EMERG "killing %s.\n",current->comm);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
force_sig(SIGFPE,current);
schedule();
}
#endif /* CONFIG_MATH_EMULATION */
#ifdef CONFIG_X86_F00F_BUG
void __init trap_init_f00f_bug(void)
{
__set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);
/*
* Update the IDT descriptor and reload the IDT so that
* it uses the read-only mapped virtual address.
*/
idt_descr.address = fix_to_virt(FIX_F00F_IDT);
[PATCH] i386: inline assembler: cleanup and encapsulate descriptor and task register management i386 inline assembler cleanup. This change encapsulates descriptor and task register management. Also, it is possible to improve assembler generation in two cases; savesegment may store the value in a register instead of a memory location, which allows GCC to optimize stack variables into registers, and MOV MEM, SEG is always a 16-bit write to memory, making the casting in math-emu unnecessary. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-03 22:56:38 +00:00
load_idt(&idt_descr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
#endif
#define _set_gate(gate_addr,type,dpl,addr,seg) \
do { \
int __d0, __d1; \
__asm__ __volatile__ ("movw %%dx,%%ax\n\t" \
"movw %4,%%dx\n\t" \
"movl %%eax,%0\n\t" \
"movl %%edx,%1" \
:"=m" (*((long *) (gate_addr))), \
"=m" (*(1+(long *) (gate_addr))), "=&a" (__d0), "=&d" (__d1) \
:"i" ((short) (0x8000+(dpl<<13)+(type<<8))), \
"3" ((char *) (addr)),"2" ((seg) << 16)); \
} while (0)
/*
* This needs to use 'idt_table' rather than 'idt', and
* thus use the _nonmapped_ version of the IDT, as the
* Pentium F0 0F bugfix can have resulted in the mapped
* IDT being write-protected.
*/
void set_intr_gate(unsigned int n, void *addr)
{
_set_gate(idt_table+n,14,0,addr,__KERNEL_CS);
}
/*
* This routine sets up an interrupt gate at directory privilege level 3.
*/
static inline void set_system_intr_gate(unsigned int n, void *addr)
{
_set_gate(idt_table+n, 14, 3, addr, __KERNEL_CS);
}
static void __init set_trap_gate(unsigned int n, void *addr)
{
_set_gate(idt_table+n,15,0,addr,__KERNEL_CS);
}
static void __init set_system_gate(unsigned int n, void *addr)
{
_set_gate(idt_table+n,15,3,addr,__KERNEL_CS);
}
static void __init set_task_gate(unsigned int n, unsigned int gdt_entry)
{
_set_gate(idt_table+n,5,0,0,(gdt_entry<<3));
}
void __init trap_init(void)
{
#ifdef CONFIG_EISA
void __iomem *p = ioremap(0x0FFFD9, 4);
if (readl(p) == 'E'+('I'<<8)+('S'<<16)+('A'<<24)) {
EISA_bus = 1;
}
iounmap(p);
#endif
#ifdef CONFIG_X86_LOCAL_APIC
init_apic_mappings();
#endif
set_trap_gate(0,&divide_error);
set_intr_gate(1,&debug);
set_intr_gate(2,&nmi);
[PATCH] i386: fix bound check IDT gate Other than apparently commonly assumed, the bound instruction does not require the corresponding IDT entry to have DPL 3. Acked-by: "Seth, Rohit" <rohit.seth@intel.com> Acked-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:11:49 +00:00
set_system_intr_gate(3, &int3); /* int3/4 can be called from all */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
set_system_gate(4,&overflow);
[PATCH] i386: fix bound check IDT gate Other than apparently commonly assumed, the bound instruction does not require the corresponding IDT entry to have DPL 3. Acked-by: "Seth, Rohit" <rohit.seth@intel.com> Acked-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:11:49 +00:00
set_trap_gate(5,&bounds);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
set_trap_gate(6,&invalid_op);
set_trap_gate(7,&device_not_available);
set_task_gate(8,GDT_ENTRY_DOUBLEFAULT_TSS);
set_trap_gate(9,&coprocessor_segment_overrun);
set_trap_gate(10,&invalid_TSS);
set_trap_gate(11,&segment_not_present);
set_trap_gate(12,&stack_segment);
set_trap_gate(13,&general_protection);
set_intr_gate(14,&page_fault);
set_trap_gate(15,&spurious_interrupt_bug);
set_trap_gate(16,&coprocessor_error);
set_trap_gate(17,&alignment_check);
#ifdef CONFIG_X86_MCE
set_trap_gate(18,&machine_check);
#endif
set_trap_gate(19,&simd_coprocessor_error);
[PATCH] i386: move SIMD initialization Move some code unrelated to any dealing with hardware bugs from i386's bugs.h to a more logical place. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:11:49 +00:00
if (cpu_has_fxsr) {
/*
* Verify that the FXSAVE/FXRSTOR data will be 16-byte aligned.
* Generates a compile-time "error: zero width for bit-field" if
* the alignment is wrong.
*/
struct fxsrAlignAssert {
int _:!(offsetof(struct task_struct,
thread.i387.fxsave) & 15);
};
printk(KERN_INFO "Enabling fast FPU save and restore... ");
set_in_cr4(X86_CR4_OSFXSR);
printk("done.\n");
}
if (cpu_has_xmm) {
printk(KERN_INFO "Enabling unmasked SIMD FPU exception "
"support... ");
set_in_cr4(X86_CR4_OSXMMEXCPT);
printk("done.\n");
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
set_system_gate(SYSCALL_VECTOR,&system_call);
/*
* Should be a barrier for any external CPU state.
*/
cpu_init();
trap_init_hook();
}
static int __init kstack_setup(char *s)
{
kstack_depth_to_print = simple_strtoul(s, NULL, 0);
[PATCH] Don't pass boot parameters to argv_init[] The boot cmdline is parsed in parse_early_param() and parse_args(,unknown_bootoption). And __setup() is used in obsolete_checksetup(). start_kernel() -> parse_args() -> unknown_bootoption() -> obsolete_checksetup() If __setup()'s callback (->setup_func()) returns 1 in obsolete_checksetup(), obsolete_checksetup() thinks a parameter was handled. If ->setup_func() returns 0, obsolete_checksetup() tries other ->setup_func(). If all ->setup_func() that matched a parameter returns 0, a parameter is seted to argv_init[]. Then, when runing /sbin/init or init=app, argv_init[] is passed to the app. If the app doesn't ignore those arguments, it will warning and exit. This patch fixes a wrong usage of it, however fixes obvious one only. Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-31 10:30:33 +00:00
return 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 22:20:36 +00:00
}
__setup("kstack=", kstack_setup);
Reference in New Issue Copy Permalink