linux/net/rxrpc/conn_event.c

423 lines
10 KiB
C
Raw Normal View History

/* connection-level event handling
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/net.h>
#include <linux/skbuff.h>
#include <linux/errqueue.h>
#include <net/sock.h>
#include <net/af_rxrpc.h>
#include <net/ip.h>
#include "ar-internal.h"
/*
* Retransmit terminal ACK or ABORT of the previous call.
*/
static void rxrpc_conn_retransmit_call(struct rxrpc_connection *conn,
struct sk_buff *skb)
{
struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
struct rxrpc_channel *chan;
struct msghdr msg;
struct kvec iov;
struct {
struct rxrpc_wire_header whdr;
union {
struct {
__be32 code;
} abort;
struct {
struct rxrpc_ackpacket ack;
u8 padding[3];
struct rxrpc_ackinfo info;
};
};
} __attribute__((packed)) pkt;
size_t len;
u32 serial, mtu, call_id;
_enter("%d", conn->debug_id);
chan = &conn->channels[sp->hdr.cid & RXRPC_CHANNELMASK];
/* If the last call got moved on whilst we were waiting to run, just
* ignore this packet.
*/
call_id = READ_ONCE(chan->last_call);
/* Sync with __rxrpc_disconnect_call() */
smp_rmb();
if (call_id != sp->hdr.callNumber)
return;
msg.msg_name = &conn->params.peer->srx.transport;
msg.msg_namelen = conn->params.peer->srx.transport_len;
msg.msg_control = NULL;
msg.msg_controllen = 0;
msg.msg_flags = 0;
pkt.whdr.epoch = htonl(sp->hdr.epoch);
pkt.whdr.cid = htonl(sp->hdr.cid);
pkt.whdr.callNumber = htonl(sp->hdr.callNumber);
pkt.whdr.seq = 0;
pkt.whdr.type = chan->last_type;
pkt.whdr.flags = conn->out_clientflag;
pkt.whdr.userStatus = 0;
pkt.whdr.securityIndex = conn->security_ix;
pkt.whdr._rsvd = 0;
pkt.whdr.serviceId = htons(chan->last_service_id);
len = sizeof(pkt.whdr);
switch (chan->last_type) {
case RXRPC_PACKET_TYPE_ABORT:
pkt.abort.code = htonl(chan->last_abort);
len += sizeof(pkt.abort);
break;
case RXRPC_PACKET_TYPE_ACK:
mtu = conn->params.peer->if_mtu;
mtu -= conn->params.peer->hdrsize;
pkt.ack.bufferSpace = 0;
pkt.ack.maxSkew = htons(skb->priority);
pkt.ack.firstPacket = htonl(chan->last_seq);
pkt.ack.previousPacket = htonl(chan->last_seq - 1);
pkt.ack.serial = htonl(sp->hdr.serial);
pkt.ack.reason = RXRPC_ACK_DUPLICATE;
pkt.ack.nAcks = 0;
pkt.info.rxMTU = htonl(rxrpc_rx_mtu);
pkt.info.maxMTU = htonl(mtu);
pkt.info.rwind = htonl(rxrpc_rx_window_size);
pkt.info.jumbo_max = htonl(rxrpc_rx_jumbo_max);
len += sizeof(pkt.ack) + sizeof(pkt.info);
trace_rxrpc_tx_ack(NULL, chan->last_seq, 0,
RXRPC_ACK_DUPLICATE, 0);
break;
}
/* Resync with __rxrpc_disconnect_call() and check that the last call
* didn't get advanced whilst we were filling out the packets.
*/
smp_rmb();
if (READ_ONCE(chan->last_call) != call_id)
return;
iov.iov_base = &pkt;
iov.iov_len = len;
serial = atomic_inc_return(&conn->serial);
pkt.whdr.serial = htonl(serial);
switch (chan->last_type) {
case RXRPC_PACKET_TYPE_ABORT:
_proto("Tx ABORT %%%u { %d } [re]", serial, conn->local_abort);
break;
case RXRPC_PACKET_TYPE_ACK:
_proto("Tx ACK %%%u [re]", serial);
break;
}
kernel_sendmsg(conn->params.local->socket, &msg, &iov, 1, len);
_leave("");
return;
}
/*
* pass a connection-level abort onto all calls on that connection
*/
static void rxrpc_abort_calls(struct rxrpc_connection *conn,
enum rxrpc_call_completion compl,
u32 abort_code, int error)
{
struct rxrpc_call *call;
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 10:10:12 +00:00
int i;
_enter("{%d},%x", conn->debug_id, abort_code);
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 13:39:44 +00:00
spin_lock(&conn->channel_lock);
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 13:39:44 +00:00
for (i = 0; i < RXRPC_MAXCALLS; i++) {
call = rcu_dereference_protected(
conn->channels[i].call,
lockdep_is_held(&conn->channel_lock));
if (call) {
if (compl == RXRPC_CALL_LOCALLY_ABORTED)
trace_rxrpc_abort("CON", call->cid,
call->call_id, 0,
abort_code, error);
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 10:10:12 +00:00
if (rxrpc_set_call_completion(call, compl,
abort_code, error))
rxrpc_notify_socket(call);
}
}
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 13:39:44 +00:00
spin_unlock(&conn->channel_lock);
_leave("");
}
/*
* generate a connection-level abort
*/
static int rxrpc_abort_connection(struct rxrpc_connection *conn,
u32 error, u32 abort_code)
{
struct rxrpc_wire_header whdr;
struct msghdr msg;
struct kvec iov[2];
__be32 word;
size_t len;
u32 serial;
int ret;
_enter("%d,,%u,%u", conn->debug_id, error, abort_code);
/* generate a connection-level abort */
spin_lock_bh(&conn->state_lock);
if (conn->state >= RXRPC_CONN_REMOTELY_ABORTED) {
spin_unlock_bh(&conn->state_lock);
_leave(" = 0 [already dead]");
return 0;
}
conn->state = RXRPC_CONN_LOCALLY_ABORTED;
spin_unlock_bh(&conn->state_lock);
rxrpc_abort_calls(conn, RXRPC_CALL_LOCALLY_ABORTED, abort_code, error);
msg.msg_name = &conn->params.peer->srx.transport;
msg.msg_namelen = conn->params.peer->srx.transport_len;
msg.msg_control = NULL;
msg.msg_controllen = 0;
msg.msg_flags = 0;
whdr.epoch = htonl(conn->proto.epoch);
whdr.cid = htonl(conn->proto.cid);
whdr.callNumber = 0;
whdr.seq = 0;
whdr.type = RXRPC_PACKET_TYPE_ABORT;
whdr.flags = conn->out_clientflag;
whdr.userStatus = 0;
whdr.securityIndex = conn->security_ix;
whdr._rsvd = 0;
whdr.serviceId = htons(conn->params.service_id);
word = htonl(conn->local_abort);
iov[0].iov_base = &whdr;
iov[0].iov_len = sizeof(whdr);
iov[1].iov_base = &word;
iov[1].iov_len = sizeof(word);
len = iov[0].iov_len + iov[1].iov_len;
serial = atomic_inc_return(&conn->serial);
whdr.serial = htonl(serial);
_proto("Tx CONN ABORT %%%u { %d }", serial, conn->local_abort);
ret = kernel_sendmsg(conn->params.local->socket, &msg, iov, 2, len);
if (ret < 0) {
_debug("sendmsg failed: %d", ret);
return -EAGAIN;
}
_leave(" = 0");
return 0;
}
/*
* mark a call as being on a now-secured channel
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 10:10:12 +00:00
* - must be called with BH's disabled.
*/
static void rxrpc_call_is_secure(struct rxrpc_call *call)
{
_enter("%p", call);
if (call) {
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 10:10:12 +00:00
write_lock_bh(&call->state_lock);
if (call->state == RXRPC_CALL_SERVER_SECURING) {
call->state = RXRPC_CALL_SERVER_ACCEPTING;
rxrpc_notify_socket(call);
}
write_unlock_bh(&call->state_lock);
}
}
/*
* connection-level Rx packet processor
*/
static int rxrpc_process_event(struct rxrpc_connection *conn,
struct sk_buff *skb,
u32 *_abort_code)
{
struct rxrpc_skb_priv *sp = rxrpc_skb(skb);
__be32 wtmp;
u32 abort_code;
int loop, ret;
if (conn->state >= RXRPC_CONN_REMOTELY_ABORTED) {
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 10:10:12 +00:00
_leave(" = -ECONNABORTED [%u]", conn->state);
return -ECONNABORTED;
}
_enter("{%d},{%u,%%%u},", conn->debug_id, sp->hdr.type, sp->hdr.serial);
switch (sp->hdr.type) {
case RXRPC_PACKET_TYPE_DATA:
case RXRPC_PACKET_TYPE_ACK:
rxrpc_conn_retransmit_call(conn, skb);
return 0;
case RXRPC_PACKET_TYPE_ABORT:
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 10:10:12 +00:00
if (skb_copy_bits(skb, sp->offset, &wtmp, sizeof(wtmp)) < 0)
return -EPROTO;
abort_code = ntohl(wtmp);
_proto("Rx ABORT %%%u { ac=%d }", sp->hdr.serial, abort_code);
conn->state = RXRPC_CONN_REMOTELY_ABORTED;
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 10:10:12 +00:00
rxrpc_abort_calls(conn, RXRPC_CALL_REMOTELY_ABORTED,
abort_code, ECONNABORTED);
return -ECONNABORTED;
case RXRPC_PACKET_TYPE_CHALLENGE:
return conn->security->respond_to_challenge(conn, skb,
_abort_code);
case RXRPC_PACKET_TYPE_RESPONSE:
ret = conn->security->verify_response(conn, skb, _abort_code);
if (ret < 0)
return ret;
ret = conn->security->init_connection_security(conn);
if (ret < 0)
return ret;
ret = conn->security->prime_packet_security(conn);
if (ret < 0)
return ret;
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 13:39:44 +00:00
spin_lock(&conn->channel_lock);
spin_lock(&conn->state_lock);
if (conn->state == RXRPC_CONN_SERVICE_CHALLENGING) {
conn->state = RXRPC_CONN_SERVICE;
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 10:10:12 +00:00
spin_unlock(&conn->state_lock);
for (loop = 0; loop < RXRPC_MAXCALLS; loop++)
rxrpc_call_is_secure(
rcu_dereference_protected(
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 13:39:44 +00:00
conn->channels[loop].call,
lockdep_is_held(&conn->channel_lock)));
rxrpc: Rewrite the data and ack handling code Rewrite the data and ack handling code such that: (1) Parsing of received ACK and ABORT packets and the distribution and the filing of DATA packets happens entirely within the data_ready context called from the UDP socket. This allows us to process and discard ACK and ABORT packets much more quickly (they're no longer stashed on a queue for a background thread to process). (2) We avoid calling skb_clone(), pskb_pull() and pskb_trim(). We instead keep track of the offset and length of the content of each packet in the sk_buff metadata. This means we don't do any allocation in the receive path. (3) Jumbo DATA packet parsing is now done in data_ready context. Rather than cloning the packet once for each subpacket and pulling/trimming it, we file the packet multiple times with an annotation for each indicating which subpacket is there. From that we can directly calculate the offset and length. (4) A call's receive queue can be accessed without taking locks (memory barriers do have to be used, though). (5) Incoming calls are set up from preallocated resources and immediately made live. They can than have packets queued upon them and ACKs generated. If insufficient resources exist, DATA packet #1 is given a BUSY reply and other DATA packets are discarded). (6) sk_buffs no longer take a ref on their parent call. To make this work, the following changes are made: (1) Each call's receive buffer is now a circular buffer of sk_buff pointers (rxtx_buffer) rather than a number of sk_buff_heads spread between the call and the socket. This permits each sk_buff to be in the buffer multiple times. The receive buffer is reused for the transmit buffer. (2) A circular buffer of annotations (rxtx_annotations) is kept parallel to the data buffer. Transmission phase annotations indicate whether a buffered packet has been ACK'd or not and whether it needs retransmission. Receive phase annotations indicate whether a slot holds a whole packet or a jumbo subpacket and, if the latter, which subpacket. They also note whether the packet has been decrypted in place. (3) DATA packet window tracking is much simplified. Each phase has just two numbers representing the window (rx_hard_ack/rx_top and tx_hard_ack/tx_top). The hard_ack number is the sequence number before base of the window, representing the last packet the other side says it has consumed. hard_ack starts from 0 and the first packet is sequence number 1. The top number is the sequence number of the highest-numbered packet residing in the buffer. Packets between hard_ack+1 and top are soft-ACK'd to indicate they've been received, but not yet consumed. Four macros, before(), before_eq(), after() and after_eq() are added to compare sequence numbers within the window. This allows for the top of the window to wrap when the hard-ack sequence number gets close to the limit. Two flags, RXRPC_CALL_RX_LAST and RXRPC_CALL_TX_LAST, are added also to indicate when rx_top and tx_top point at the packets with the LAST_PACKET bit set, indicating the end of the phase. (4) Calls are queued on the socket 'receive queue' rather than packets. This means that we don't need have to invent dummy packets to queue to indicate abnormal/terminal states and we don't have to keep metadata packets (such as ABORTs) around (5) The offset and length of a (sub)packet's content are now passed to the verify_packet security op. This is currently expected to decrypt the packet in place and validate it. However, there's now nowhere to store the revised offset and length of the actual data within the decrypted blob (there may be a header and padding to skip) because an sk_buff may represent multiple packets, so a locate_data security op is added to retrieve these details from the sk_buff content when needed. (6) recvmsg() now has to handle jumbo subpackets, where each subpacket is individually secured and needs to be individually decrypted. The code to do this is broken out into rxrpc_recvmsg_data() and shared with the kernel API. It now iterates over the call's receive buffer rather than walking the socket receive queue. Additional changes: (1) The timers are condensed to a single timer that is set for the soonest of three timeouts (delayed ACK generation, DATA retransmission and call lifespan). (2) Transmission of ACK and ABORT packets is effected immediately from process-context socket ops/kernel API calls that cause them instead of them being punted off to a background work item. The data_ready handler still has to defer to the background, though. (3) A shutdown op is added to the AF_RXRPC socket so that the AFS filesystem can shut down the socket and flush its own work items before closing the socket to deal with any in-progress service calls. Future additional changes that will need to be considered: (1) Make sure that a call doesn't hog the front of the queue by receiving data from the network as fast as userspace is consuming it to the exclusion of other calls. (2) Transmit delayed ACKs from within recvmsg() when we've consumed sufficiently more packets to avoid the background work item needing to run. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-08 10:10:12 +00:00
} else {
spin_unlock(&conn->state_lock);
}
rxrpc: Call channels should have separate call number spaces Each channel on a connection has a separate, independent number space from which to allocate callNumber values. It is entirely possible, for example, to have a connection with four active calls, each with call number 1. Note that the callNumber values for any particular channel don't have to start at 1, but they are supposed to increment monotonically for that channel from a client's perspective and may not be reused once the call number is transmitted (until the epoch cycles all the way back round). Currently, however, call numbers are allocated on a per-connection basis and, further, are held in an rb-tree. The rb-tree is redundant as the four channel pointers in the rxrpc_connection struct are entirely capable of pointing to all the calls currently in progress on a connection. To this end, make the following changes: (1) Handle call number allocation independently per channel. (2) Get rid of the conn->calls rb-tree. This is overkill as a connection may have a maximum of four calls in progress at any one time. Use the pointers in the channels[] array instead, indexed by the channel number from the packet. (3) For each channel, save the result of the last call that was in progress on that channel in conn->channels[] so that the final ACK or ABORT packet can be replayed if necessary. Any call earlier than that is just ignored. If we've seen the next call number in a packet, the last one is most definitely defunct. (4) When generating a RESPONSE packet for a connection, the call number counter for each channel must be included in it. (5) When parsing a RESPONSE packet for a connection, the call number counters contained therein should be used to set the minimum expected call numbers on each channel. To do in future commits: (1) Replay terminal packets based on the last call stored in conn->channels[]. (2) Connections should be retired before the callNumber space on any channel runs out. (3) A server is expected to disregard or reject any new incoming call that has a call number less than the current call number counter. The call number counter for that channel must be advanced to the new call number. Note that the server cannot just require that the next call that it sees on a channel be exactly the call number counter + 1 because then there's a scenario that could cause a problem: The client transmits a packet to initiate a connection, the network goes out, the server sends an ACK (which gets lost), the client sends an ABORT (which also gets lost); the network then reconnects, the client then reuses the call number for the next call (it doesn't know the server already saw the call number), but the server thinks it already has the first packet of this call (it doesn't know that the client doesn't know that it saw the call number the first time). Signed-off-by: David Howells <dhowells@redhat.com>
2016-06-27 13:39:44 +00:00
spin_unlock(&conn->channel_lock);
return 0;
default:
_leave(" = -EPROTO [%u]", sp->hdr.type);
return -EPROTO;
}
}
/*
* set up security and issue a challenge
*/
static void rxrpc_secure_connection(struct rxrpc_connection *conn)
{
u32 abort_code;
int ret;
_enter("{%d}", conn->debug_id);
ASSERT(conn->security_ix != 0);
if (!conn->params.key) {
_debug("set up security");
ret = rxrpc_init_server_conn_security(conn);
switch (ret) {
case 0:
break;
case -ENOENT:
abort_code = RX_CALL_DEAD;
goto abort;
default:
abort_code = RXKADNOAUTH;
goto abort;
}
}
if (conn->security->issue_challenge(conn) < 0) {
abort_code = RX_CALL_DEAD;
ret = -ENOMEM;
goto abort;
}
_leave("");
return;
abort:
_debug("abort %d, %d", ret, abort_code);
rxrpc_abort_connection(conn, -ret, abort_code);
_leave(" [aborted]");
}
/*
* connection-level event processor
*/
void rxrpc_process_connection(struct work_struct *work)
{
struct rxrpc_connection *conn =
container_of(work, struct rxrpc_connection, processor);
struct sk_buff *skb;
u32 abort_code = RX_PROTOCOL_ERROR;
int ret;
rxrpc_see_connection(conn);
if (test_and_clear_bit(RXRPC_CONN_EV_CHALLENGE, &conn->events))
rxrpc_secure_connection(conn);
/* go through the conn-level event packets, releasing the ref on this
* connection that each one has when we've finished with it */
while ((skb = skb_dequeue(&conn->rx_queue))) {
rxrpc_see_skb(skb, rxrpc_skb_rx_seen);
ret = rxrpc_process_event(conn, skb, &abort_code);
switch (ret) {
case -EPROTO:
case -EKEYEXPIRED:
case -EKEYREJECTED:
goto protocol_error;
case -EAGAIN:
goto requeue_and_leave;
case -ECONNABORTED:
default:
rxrpc_free_skb(skb, rxrpc_skb_rx_freed);
break;
}
}
out:
rxrpc_put_connection(conn);
_leave("");
return;
requeue_and_leave:
skb_queue_head(&conn->rx_queue, skb);
goto out;
protocol_error:
if (rxrpc_abort_connection(conn, -ret, abort_code) < 0)
goto requeue_and_leave;
rxrpc_free_skb(skb, rxrpc_skb_rx_freed);
_leave(" [EPROTO]");
goto out;
}