leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dd4de433aa
linux/arch/arm/boot/dts/vf500.dtsi

56 lines
1.1 KiB
Plaintext
Raw Normal View History

ARM: dts: vf610: create generic base device trees This adds more generic base device trees for Vybrid SoCs. There are three series of Vybrid SoC commonly available: - VF3xx series: single core, Cortex-A5 without external memory - VF5xx series: single core, Cortex-A5 - VF6xx series: dual core, Cortex-A5/Cortex-M4 The second digit represents the presents of a L2 cache (VFx1x). The VF3xx series are not suitable for Linux especially since the internal memory is quite small (1.5MiB). The VF500 is essentially the base SoC, with only one core and without L1 cache. The VF610 is a superset of the VF500, hence vf500.dtsi is then included and enhanced by vf610.dtsi. There is no board using VF510 or VF600 currently, but, if needed, they can be added easily. The Linux kernel can also run on the Cortex-M4 CPU of Vybrid using !MMU support. This patchset creates a device tree structure which allows to share peripherals nodes for a VF6xx Cortex-M4 device tree too. The two CPU types have different views of the system: Foremost they are using different interrupt controllers, but also the memory map is slightly different. The base device tree vfxxx.dtsi allows to create SoC and board level device trees supporting the Cortex-M4 while reusing the shared peripherals nodes. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-02 20:36:46 +00:00
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "skeleton.dtsi"
#include "vfxxx.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
a5_cpu: cpu@0 {
compatible = "arm,cortex-a5";
device_type = "cpu";
reg = <0x0>;
};
};
soc {
aips-bus@40000000 {
intc: interrupt-controller@40002000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
ARM: dts: vf610: add Miscellaneous System Control Module (MSCM) Add the Miscellaneous System Control Module (MSCM) to the base device tree for Vybrid SoC's. This module contains registers to get information of the individual and current (accessing) CPU. In a second block, there is an interrupt router, which handles the routing of the interrupts between the two CPU cores on VF6xx variants of the SoC. However, also on single core variants the interrupt router needs to be configured in order to receive interrupts on the CPU's interrupt controller. Almost all peripheral interrupts are routed through the router, hence the MSCM module is the default interrupt parent for this SoC. In a earlier commit the interrupt nodes were moved out of the peripheral nodes and specified in the CPU specific vf500.dtsi device tree. This allowed to use the base device tree vfxxx.dtsi also for a Cortex-M4 specific device tree, which uses different interrupt nodes due to the NVIC interrupt controller. However, since the interrupt parent for peripherals is the MSCM module independently which CPU the device tree is used for, we can move the interrupt nodes into the base device tree vfxxx.dtsi again. Depending on which CPU this base device tree will be used with, the correct parent interrupt controller has to be assigned to the MSCM-IR node (GIC or NVIC). The driver takes care of the parent interrupt controller specific needs (interrupt-cells). Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-01 22:41:29 +00:00
interrupt-parent = <&intc>;
ARM: dts: vf610: create generic base device trees This adds more generic base device trees for Vybrid SoCs. There are three series of Vybrid SoC commonly available: - VF3xx series: single core, Cortex-A5 without external memory - VF5xx series: single core, Cortex-A5 - VF6xx series: dual core, Cortex-A5/Cortex-M4 The second digit represents the presents of a L2 cache (VFx1x). The VF3xx series are not suitable for Linux especially since the internal memory is quite small (1.5MiB). The VF500 is essentially the base SoC, with only one core and without L1 cache. The VF610 is a superset of the VF500, hence vf500.dtsi is then included and enhanced by vf610.dtsi. There is no board using VF510 or VF600 currently, but, if needed, they can be added easily. The Linux kernel can also run on the Cortex-M4 CPU of Vybrid using !MMU support. This patchset creates a device tree structure which allows to share peripherals nodes for a VF6xx Cortex-M4 device tree too. The two CPU types have different views of the system: Foremost they are using different interrupt controllers, but also the memory map is slightly different. The base device tree vfxxx.dtsi allows to create SoC and board level device trees supporting the Cortex-M4 while reusing the shared peripherals nodes. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-02 20:36:46 +00:00
reg = <0x40003000 0x1000>,
<0x40002100 0x100>;
};
global_timer: timer@40002200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x40002200 0x20>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
ARM: dts: vf610: add Miscellaneous System Control Module (MSCM) Add the Miscellaneous System Control Module (MSCM) to the base device tree for Vybrid SoC's. This module contains registers to get information of the individual and current (accessing) CPU. In a second block, there is an interrupt router, which handles the routing of the interrupts between the two CPU cores on VF6xx variants of the SoC. However, also on single core variants the interrupt router needs to be configured in order to receive interrupts on the CPU's interrupt controller. Almost all peripheral interrupts are routed through the router, hence the MSCM module is the default interrupt parent for this SoC. In a earlier commit the interrupt nodes were moved out of the peripheral nodes and specified in the CPU specific vf500.dtsi device tree. This allowed to use the base device tree vfxxx.dtsi also for a Cortex-M4 specific device tree, which uses different interrupt nodes due to the NVIC interrupt controller. However, since the interrupt parent for peripherals is the MSCM module independently which CPU the device tree is used for, we can move the interrupt nodes into the base device tree vfxxx.dtsi again. Depending on which CPU this base device tree will be used with, the correct parent interrupt controller has to be assigned to the MSCM-IR node (GIC or NVIC). The driver takes care of the parent interrupt controller specific needs (interrupt-cells). Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-01 22:41:29 +00:00
interrupt-parent = <&intc>;
ARM: dts: vf610: create generic base device trees This adds more generic base device trees for Vybrid SoCs. There are three series of Vybrid SoC commonly available: - VF3xx series: single core, Cortex-A5 without external memory - VF5xx series: single core, Cortex-A5 - VF6xx series: dual core, Cortex-A5/Cortex-M4 The second digit represents the presents of a L2 cache (VFx1x). The VF3xx series are not suitable for Linux especially since the internal memory is quite small (1.5MiB). The VF500 is essentially the base SoC, with only one core and without L1 cache. The VF610 is a superset of the VF500, hence vf500.dtsi is then included and enhanced by vf610.dtsi. There is no board using VF510 or VF600 currently, but, if needed, they can be added easily. The Linux kernel can also run on the Cortex-M4 CPU of Vybrid using !MMU support. This patchset creates a device tree structure which allows to share peripherals nodes for a VF6xx Cortex-M4 device tree too. The two CPU types have different views of the system: Foremost they are using different interrupt controllers, but also the memory map is slightly different. The base device tree vfxxx.dtsi allows to create SoC and board level device trees supporting the Cortex-M4 while reusing the shared peripherals nodes. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-02 20:36:46 +00:00
clocks = <&clks VF610_CLK_PLATFORM_BUS>;
};
};
};
};
ARM: dts: vf610: add Miscellaneous System Control Module (MSCM) Add the Miscellaneous System Control Module (MSCM) to the base device tree for Vybrid SoC's. This module contains registers to get information of the individual and current (accessing) CPU. In a second block, there is an interrupt router, which handles the routing of the interrupts between the two CPU cores on VF6xx variants of the SoC. However, also on single core variants the interrupt router needs to be configured in order to receive interrupts on the CPU's interrupt controller. Almost all peripheral interrupts are routed through the router, hence the MSCM module is the default interrupt parent for this SoC. In a earlier commit the interrupt nodes were moved out of the peripheral nodes and specified in the CPU specific vf500.dtsi device tree. This allowed to use the base device tree vfxxx.dtsi also for a Cortex-M4 specific device tree, which uses different interrupt nodes due to the NVIC interrupt controller. However, since the interrupt parent for peripherals is the MSCM module independently which CPU the device tree is used for, we can move the interrupt nodes into the base device tree vfxxx.dtsi again. Depending on which CPU this base device tree will be used with, the correct parent interrupt controller has to be assigned to the MSCM-IR node (GIC or NVIC). The driver takes care of the parent interrupt controller specific needs (interrupt-cells). Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2015-03-01 22:41:29 +00:00
&mscm_ir {
interrupt-parent = <&intc>;
ARM: dts: vf610: create generic base device trees This adds more generic base device trees for Vybrid SoCs. There are three series of Vybrid SoC commonly available: - VF3xx series: single core, Cortex-A5 without external memory - VF5xx series: single core, Cortex-A5 - VF6xx series: dual core, Cortex-A5/Cortex-M4 The second digit represents the presents of a L2 cache (VFx1x). The VF3xx series are not suitable for Linux especially since the internal memory is quite small (1.5MiB). The VF500 is essentially the base SoC, with only one core and without L1 cache. The VF610 is a superset of the VF500, hence vf500.dtsi is then included and enhanced by vf610.dtsi. There is no board using VF510 or VF600 currently, but, if needed, they can be added easily. The Linux kernel can also run on the Cortex-M4 CPU of Vybrid using !MMU support. This patchset creates a device tree structure which allows to share peripherals nodes for a VF6xx Cortex-M4 device tree too. The two CPU types have different views of the system: Foremost they are using different interrupt controllers, but also the memory map is slightly different. The base device tree vfxxx.dtsi allows to create SoC and board level device trees supporting the Cortex-M4 while reusing the shared peripherals nodes. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-02 20:36:46 +00:00
};
ARM: dts: vf610: enable watchdog for Cortex-A5 dt's During restructuring of the device tree files the watchdog was changed to be disabled by default. However, since the watchdog instance is dedicated to the Cortex-A5, enable the peripheral by default in the base device tree vf500.dtsi. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-27 23:35:36 +00:00
&wdoga5 {
status = "okay";
};
Reference in New Issue Copy Permalink