leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dbc0416104
linux/arch/arm/mach-at91/Kconfig

562 lines
14 KiB
Plaintext
Raw Normal View History

[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
if ARCH_AT91
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
config HAVE_AT91_DATAFLASH_CARD
bool
ARM: at91: make DBGU soc independent we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-01 17:43:31 +00:00
config HAVE_AT91_DBGU0
bool
config HAVE_AT91_DBGU1
bool
ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-29 14:01:08 +00:00
config AT91_SAM9_ALT_RESET
bool
ARM: at91: always enable sam9 restart This is need for multiple SoC in the same kernel image and DT. As we will chose the restart function via binding. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-02 19:14:16 +00:00
default !ARCH_AT91X40
ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-29 14:01:08 +00:00
ARM: at91: Fix at91sam9g45 and at91cap9 reset As on the other sam9 we need to cleanly shutdown the DDRAM before rebooting. On those SoC the SDRAM/DDRAM controller is different. So, the assembly code ends up being not cleanly combined with previous at91sam9_alt_restart function. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-17 17:41:28 +00:00
config AT91_SAM9G45_RESET
bool
ARM: at91: always enable sam9 restart This is need for multiple SoC in the same kernel image and DT. As we will chose the restart function via binding. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-02 19:14:16 +00:00
default !ARCH_AT91X40
ARM: at91: Fix at91sam9g45 and at91cap9 reset As on the other sam9 we need to cleanly shutdown the DDRAM before rebooting. On those SoC the SDRAM/DDRAM controller is different. So, the assembly code ends up being not cleanly combined with previous at91sam9_alt_restart function. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-17 17:41:28 +00:00
ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select This will allow to simplify the switch to multi soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 05:04:04 +00:00
config SOC_AT91SAM9
bool
select GENERIC_CLOCKEVENTS
select CPU_ARM926T
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
menu "Atmel AT91 System-on-Chip"
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
comment "Atmel AT91 Processor"
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
config SOC_AT91SAM9
bool
select CPU_ARM926T
ARM: at91: at91 based machines specify their own irq handler at run time SOC_AT91SAM9 selects MULTI_IRQ_HANDLER in order to let machines specify their own IRQ handler at run time. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-06-11 13:38:03 +00:00
select MULTI_IRQ_HANDLER
ARM: at91: sparse irq support Enable sparse irq support for multisoc image. It involves to add the NR_IRQS_LEGACY offset to static SoC irq number definitions since NR_IRQS_LEGACY irq descs are allocated before AIC requests irq descs allocation. Move NR_AIC_IRQS macro to a more appropiate place with the purpose to remove mach/irqs.h later. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-06-21 12:47:27 +00:00
select SPARSE_IRQ
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
select AT91_SAM9_TIME
select AT91_SAM9_SMC
config SOC_AT91RM9200
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
bool "AT91RM9200"
[ARM] Arrange for platforms to select appropriate CPU support Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: Nicolas Pitre <nico@marvell.com> Acked-by: Andrew Victor <linux@maxim.org.za> Acked-by: Brian Swetland <swetland@google.com> Acked-by: Eric Miao <eric.miao@marvell.com> Acked-by: Nicolas Bellido <ml@acolin.be> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-26 10:55:14 +00:00
select CPU_ARM920T
ARM: at91: fix new build errors MULTI_IRQ_HANDLER and SPARSE_IRQ are now required everywhere because mach/irqs.h and mach/entry-macros.S are gone but the symbols are only selected for AT91SAM9, not for the NOMMU parts. A few files now need to include linux/io.h directly, which used to be included through other headers that have changed. The new at91_aic_irq_priorities variable is only used with CONFIG_OF enabled and should not be visible otherwise. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-04 07:45:16 +00:00
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
[ARM] 4539/1: clocksource and clockevents for at91rm9200 GENERIC_TIME and GENERIC_CLOCKEVENTS support for the at91rm9200. - Oneshot mode (used for NO_HZ and high res timers) uses the alarm to emulate a real oneshot timer; the trickiest bit is how to avoid some lowlevel races. Thanks to Remy Bohmer for various fixes to this code. - Tighten up periodic mode support using the PIT. - Streamline reads of the 32KHz counter. Thanks to Marc Pignat for some testing results: the CRTR register has *very* odd behavior. The reread appears to work around stranger glitches than just getting an old clock value (which would quickly self-correct). - Remove the rounding-up of tick_usec to 10.009 msec (32KiHz/100), since that no longer acts correct (time increases too fast). Note that the at91sam9 and at91x40 chips need other solutions, since they don't have the same system timer module. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Bill Gatliff <bgat@billgatliff.com> Acked-by:Remy Bohmer <linux@bohmer.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-31 00:41:26 +00:00
select GENERIC_CLOCKEVENTS
ARM: at91: make DBGU soc independent we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-01 17:43:31 +00:00
select HAVE_AT91_DBGU0
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
config SOC_AT91SAM9260
bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20"
ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select This will allow to simplify the switch to multi soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 05:04:04 +00:00
select SOC_AT91SAM9
ARM: at91: make DBGU soc independent we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-01 17:43:31 +00:00
select HAVE_AT91_DBGU0
net: atmel_macb Kconfig: remove long dependency line Many Atmel SOC are embedding a MACB controller. This patch removes the long dependency line for this Atmel MACB ethernet driver configuration entry. The HAVE_NET_MACB configuration option is located in the net Kconfig file as it may be setup by ARM/AT91 and AVR32 chips. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: David Miller <davem@davemloft.net> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2010-08-08 04:21:33 +00:00
select HAVE_NET_MACB
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
help
Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE
or AT91SAM9G20 SoC.
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
config SOC_AT91SAM9261
bool "AT91SAM9261 or AT91SAM9G10"
ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select This will allow to simplify the switch to multi soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 05:04:04 +00:00
select SOC_AT91SAM9
ARM: at91: make DBGU soc independent we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-01 17:43:31 +00:00
select HAVE_AT91_DBGU0
atmel_lcdfb Kconfig: remove long dependency line Many Atmel SOC are embedding a LCD controller. This patch removes the long dependency line for this Atmel LCD framebuffer driver configuration entry. The HAVE_FB_ATMEL configuration option is located in the video Kconfig file as it may be setup by ARM/AT91 and AVR32 chips. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-06-23 14:30:56 +00:00
select HAVE_FB_ATMEL
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
help
Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC.
[ARM] 5570/1: at91: Support for at91sam9g10: core chip & board support From: Hong Xu <hong.xu@atmel.com> Here are the modification to at91sam9261 files dedicated to the support of at91sam9g10. This direction has been adopted to minimize code duplication. All at91sam9261 drivers are enabled in _devices and board- files. Modificaton to peripherals that support at91sam9g10 will be added in future patches. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-26 14:37:01 +00:00
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
config SOC_AT91SAM9263
[ARM] 4145/2: AT91: Add support for AT91SAM9263 processor Add support for the Atmel AT91SAM9263 processor. It is similar to the AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08 08:42:40 +00:00
bool "AT91SAM9263"
ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select This will allow to simplify the switch to multi soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 05:04:04 +00:00
select SOC_AT91SAM9
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
select HAVE_AT91_DBGU1
atmel_lcdfb Kconfig: remove long dependency line Many Atmel SOC are embedding a LCD controller. This patch removes the long dependency line for this Atmel LCD framebuffer driver configuration entry. The HAVE_FB_ATMEL configuration option is located in the video Kconfig file as it may be setup by ARM/AT91 and AVR32 chips. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-06-23 14:30:56 +00:00
select HAVE_FB_ATMEL
net: atmel_macb Kconfig: remove long dependency line Many Atmel SOC are embedding a MACB controller. This patch removes the long dependency line for this Atmel MACB ethernet driver configuration entry. The HAVE_NET_MACB configuration option is located in the net Kconfig file as it may be setup by ARM/AT91 and AVR32 chips. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: David Miller <davem@davemloft.net> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2010-08-08 04:21:33 +00:00
select HAVE_NET_MACB
[ARM] 4145/2: AT91: Add support for AT91SAM9263 processor Add support for the Atmel AT91SAM9263 processor. It is similar to the AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08 08:42:40 +00:00
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
config SOC_AT91SAM9RL
[ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors. Add support for Atmel's new AT91SAM9RL range of processors. Includes similar peripherals as other AT91SAM9 processors, but with a High-speed USB controller and various sizes of internal SRAM. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 19:49:56 +00:00
bool "AT91SAM9RL"
ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select This will allow to simplify the switch to multi soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 05:04:04 +00:00
select SOC_AT91SAM9
ARM: at91: make DBGU soc independent we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-01 17:43:31 +00:00
select HAVE_AT91_DBGU0
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
select HAVE_FB_ATMEL
[ARM] 4370/3: AT91: Support for Atmel AT91SAM9RL processors. Add support for Atmel's new AT91SAM9RL range of processors. Includes similar peripherals as other AT91SAM9 processors, but with a High-speed USB controller and various sizes of internal SRAM. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 19:49:56 +00:00
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
config SOC_AT91SAM9G45
ARM: at91/Kconfig: change at91sam9g45 entry The AT91SAM9G45 entry covers the whole family so we also add the AT91SAM9M10 name and the "families" qualifier. Then, add a comment to explain which SoCs are supported by this entry: AT91SAM9G45, AT91SAM9G46 but also AT91SAM9M10 and AT91SAM9M11. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15 11:26:43 +00:00
bool "AT91SAM9G45 or AT91SAM9M10 families"
ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select This will allow to simplify the switch to multi soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 05:04:04 +00:00
select SOC_AT91SAM9
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
select HAVE_AT91_DBGU1
atmel_lcdfb Kconfig: remove long dependency line Many Atmel SOC are embedding a LCD controller. This patch removes the long dependency line for this Atmel LCD framebuffer driver configuration entry. The HAVE_FB_ATMEL configuration option is located in the video Kconfig file as it may be setup by ARM/AT91 and AVR32 chips. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-06-23 14:30:56 +00:00
select HAVE_FB_ATMEL
net: atmel_macb Kconfig: remove long dependency line Many Atmel SOC are embedding a MACB controller. This patch removes the long dependency line for this Atmel MACB ethernet driver configuration entry. The HAVE_NET_MACB configuration option is located in the net Kconfig file as it may be setup by ARM/AT91 and AVR32 chips. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: David Miller <davem@davemloft.net> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2010-08-08 04:21:33 +00:00
select HAVE_NET_MACB
ARM: at91/Kconfig: change at91sam9g45 entry The AT91SAM9G45 entry covers the whole family so we also add the AT91SAM9M10 name and the "families" qualifier. Then, add a comment to explain which SoCs are supported by this entry: AT91SAM9G45, AT91SAM9G46 but also AT91SAM9M10 and AT91SAM9M11. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15 11:26:43 +00:00
help
Select this if you are using one of Atmel's AT91SAM9G45 family SoC.
This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
[ARM] 5572/1: at91: Support for at91sam9g45 series: core chip & board support Here are the at91 specific files dedicated to the at91sam9g45 series. They mimic the traditional at91 way of managing chips & boards. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In the future, the main board for this 9g45 series will be the AT91SAM9M10G45-EK (I choose this last name for the board file). Simple drivers are enabled in _devices and board- files. Newer peripheral support will be added in future patches. Incuded peripherals support (for now): - USART - SPI - Ethernet - NAND flash - LCD - gpio/joystick/buttons - leds and pwm Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-26 14:36:58 +00:00
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
config SOC_AT91SAM9X5
ARM: at91/at91sam9x5: Configuration and Makefile Kconfig and Makefile entries for SAM9x5 family. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-01-23 15:16:44 +00:00
bool "AT91SAM9x5 family"
ARM: at91: add SOC_AT91SAM9 kconfig option to factorise select This will allow to simplify the switch to multi soc in the same kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 05:04:04 +00:00
select SOC_AT91SAM9
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
select HAVE_AT91_DBGU0
ARM: at91/at91sam9x5: Configuration and Makefile Kconfig and Makefile entries for SAM9x5 family. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-01-23 15:16:44 +00:00
select HAVE_FB_ATMEL
select HAVE_NET_MACB
ARM: at91/Kconfig: add comment to at91sam9x5 family entry Add comment to make it clear that several SoC are supported by this generic entry. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15 11:48:41 +00:00
help
Select this if you are using one of Atmel's AT91SAM9x5 family SoC.
This means that your SAM9 name finishes with a '5' (except if it is
AT91SAM9G45!).
This support covers AT91SAM9G15, AT91SAM9G25, AT91SAM9X25, AT91SAM9G35
and AT91SAM9X35.
ARM: at91/at91sam9x5: Configuration and Makefile Kconfig and Makefile entries for SAM9x5 family. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-01-23 15:16:44 +00:00
ARM: at91: Add machine files for AT91SAM9N12 SoC Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2012-04-17 06:26:31 +00:00
config SOC_AT91SAM9N12
bool "AT91SAM9N12 family"
select SOC_AT91SAM9
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
help
Select this if you are using Atmel's AT91SAM9N12 SoC.
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
choice
prompt "Atmel AT91 Processor Devices for non DT boards"
config ARCH_AT91_NONE
bool "None"
config ARCH_AT91RM9200
bool "AT91RM9200"
select SOC_AT91RM9200
config ARCH_AT91SAM9260
bool "AT91SAM9260 or AT91SAM9XE"
select SOC_AT91SAM9260
config ARCH_AT91SAM9261
bool "AT91SAM9261"
select SOC_AT91SAM9261
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
select SOC_AT91SAM9261
config ARCH_AT91SAM9263
bool "AT91SAM9263"
select SOC_AT91SAM9263
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
select SOC_AT91SAM9RL
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
select SOC_AT91SAM9260
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
select SOC_AT91SAM9G45
[ARM] 4536/1: configure support for AT91x40 and EB01 Configuration support for the AT91x40 CPU and EB01 board. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-30 01:39:21 +00:00
config ARCH_AT91X40
bool "AT91x40"
ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support We can now compile all SoC core support together and DT boards. We still can not compile together the non DT board. So We keep the ARCH_AT91xxx for the non DT board and for backward defconfig compatibility. This will enable the plaform_device ressources. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-04-06 03:51:50 +00:00
depends on !MMU
ARM: at91: fix new build errors MULTI_IRQ_HANDLER and SPARSE_IRQ are now required everywhere because mach/irqs.h and mach/entry-macros.S are gone but the symbols are only selected for AT91SAM9, not for the NOMMU parts. A few files now need to include linux/io.h directly, which used to be included through other headers that have changed. The new at91_aic_irq_priorities variable is only used with CONFIG_OF enabled and should not be visible otherwise. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-07-04 07:45:16 +00:00
select MULTI_IRQ_HANDLER
select SPARSE_IRQ
ARM: convert arm to arch_gettimeoffset() Convert arm to use GENERIC_TIME via the arch_getoffset() infrastructure, reducing the amount of arch specific code we need to maintain. The arm architecture is the last arch that need to be converted. Signed-off-by: John Stultz <johnstul@us.ibm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org>
2010-03-24 00:22:36 +00:00
select ARCH_USES_GETTIMEOFFSET
[ARM] 4536/1: configure support for AT91x40 and EB01 Configuration support for the AT91x40 CPU and EB01 board. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-30 01:39:21 +00:00
[ARM] 3960/1: AT91: Final SAM9 intergration patches. This patch includes a number of small changes for integrating the AT91SAM9261 and AT91SAM0260 support. * Can only select support for one AT91 processor at a time. * Remove most of the remaining static memory mapping for the AT91RM9200. * Reserve 1Mb of memory below the IO for mapping the internal SRAM and any custom board-specific devices (ie, FPGA). * The SAM9260 has more serial ports, so increase the maximum to 7. * Define the standard chipselect addresses, and define other addresses relative to those. * CLOCK_TICK_RATE is different on the SAM926x's. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 10:51:19 +00:00
endchoice
[ARM] 4536/1: configure support for AT91x40 and EB01 Configuration support for the AT91x40 CPU and EB01 board. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-30 01:39:21 +00:00
config AT91_PMC_UNIT
bool
default !ARCH_AT91X40
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
# ----------------------------------------------------------
if ARCH_AT91RM9200
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
comment "AT91RM9200 Board Type"
[ARM] 3654/1: add ajeco 1arm sbc support Patch from Lennert Buytenhek This patch adds support for the Ajeco 1ARM Single Board Computer, a VME form factor SBC based on the Atmel AT91 SoC, with 64M RAM, seven serial ports, three ethernet ports, IDE, CF, USB host and device, and S-Video/VGA out.-- Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26 16:48:29 +00:00
config MACH_ONEARM
bool "Ajeco 1ARM Single Board Computer"
help
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
Select this if you are using Ajeco's 1ARM Single Board Computer.
Update broken web addresses in arch directory. The patch below updates broken web addresses in the arch directory. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-16 17:36:23 +00:00
<http://www.ajeco.fi/>
[ARM] 3654/1: add ajeco 1arm sbc support Patch from Lennert Buytenhek This patch adds support for the Ajeco 1ARM Single Board Computer, a VME form factor SBC based on the Atmel AT91 SoC, with 64M RAM, seven serial ports, three ethernet ports, IDE, CF, USB host and device, and S-Video/VGA out.-- Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26 16:48:29 +00:00
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
config ARCH_AT91RM9200DK
bool "Atmel AT91RM9200-DK Development board"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
select HAVE_AT91_DATAFLASH_CARD
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
help
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
Select this if you are using Atmel's AT91RM9200-DK Development board.
(Discontinued)
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
config MACH_AT91RM9200EK
bool "Atmel AT91RM9200-EK Evaluation Kit"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
select HAVE_AT91_DATAFLASH_CARD
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
help
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
config MACH_CSB337
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
bool "Cogent CSB337"
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
help
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
Select this if you are using Cogent's CSB337 board.
<http://www.cogcomp.com/csb_csb337.htm>
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
config MACH_CSB637
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
bool "Cogent CSB637"
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
help
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
Select this if you are using Cogent's CSB637 board.
<http://www.cogcomp.com/csb_csb637.htm>
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
config MACH_CARMEVA
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
bool "Conitec ARM&EVA"
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
help
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
Select this if you are using Conitec's AT91RM9200-MCU-Module.
Update broken web addresses in arch directory. The patch below updates broken web addresses in the arch directory. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-16 17:36:23 +00:00
<http://www.conitec.net/english/linuxboard.php>
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
config MACH_ATEB9200
bool "Embest ATEB9200"
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
help
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
Select this if you are using Embest's ATEB9200 board.
<http://www.embedinfo.com/english/product/ATEB9200.asp>
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
config MACH_KB9200
bool "KwikByte KB920x"
[ARM] 3604/1: AT91RM9200 New boards Patch from Andrew Victor This patch adds support for an additional 4 AT91RM9200-based boards: 1. Conitec ARM&EVA [MACH_CARMEVA] (http://www.conitec.net/english/linuxboard.htm) 2. KwikByte KB920x [MACH_KB9200] (http://kwikbyte.com/KB9202_description_new.htm) 3. Embest ATEB9200 [MACH_ATEB9200] (http://www.embedinfo.com/english/product/ATEB9200.asp) 4. Sperry-Sun KAFA board [MACH_KAFA] (unknown) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 18:30:18 +00:00
help
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
Select this if you are using KwikByte's KB920x board.
Update broken web addresses in arch directory. The patch below updates broken web addresses in the arch directory. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-10-16 17:36:23 +00:00
<http://www.kwikbyte.com/KB9202.html>
[ARM] 3604/1: AT91RM9200 New boards Patch from Andrew Victor This patch adds support for an additional 4 AT91RM9200-based boards: 1. Conitec ARM&EVA [MACH_CARMEVA] (http://www.conitec.net/english/linuxboard.htm) 2. KwikByte KB920x [MACH_KB9200] (http://kwikbyte.com/KB9202_description_new.htm) 3. Embest ATEB9200 [MACH_ATEB9200] (http://www.embedinfo.com/english/product/ATEB9200.asp) 4. Sperry-Sun KAFA board [MACH_KAFA] (unknown) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 18:30:18 +00:00
[ARM] 4300/1: Add picotux 200 ARM board Add the picotux 200 ARM board: - Enable its machine type in the filter in head.S - Add configuration option - Add board initialisation - Add default configuration Signed-off-by: Simon Richter <Simon.Richter@kleinhenz.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-02 13:06:29 +00:00
config MACH_PICOTUX2XX
bool "picotux 200"
help
Select this if you are using a picotux 200.
<http://www.picotux.com/>
[ARM] 3604/1: AT91RM9200 New boards Patch from Andrew Victor This patch adds support for an additional 4 AT91RM9200-based boards: 1. Conitec ARM&EVA [MACH_CARMEVA] (http://www.conitec.net/english/linuxboard.htm) 2. KwikByte KB920x [MACH_KB9200] (http://kwikbyte.com/KB9202_description_new.htm) 3. Embest ATEB9200 [MACH_ATEB9200] (http://www.embedinfo.com/english/product/ATEB9200.asp) 4. Sperry-Sun KAFA board [MACH_KAFA] (unknown) Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20 18:30:18 +00:00
config MACH_KAFA
bool "Sperry-Sun KAFA board"
help
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
Select this if you are using Sperry-Sun's KAFA board.
[ARM] 4980/1: [AT91] emQbit ECB_AT91 board support Support for the emQbit ECB_AT91 board. <http://wiki.emqbit.com/free-ecb-at91> Original patch from Nelson Castillo. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-15 20:10:11 +00:00
config MACH_ECBAT91
bool "emQbit ECB_AT91 SBC"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
select HAVE_AT91_DATAFLASH_CARD
[ARM] 4980/1: [AT91] emQbit ECB_AT91 board support Support for the emQbit ECB_AT91 board. <http://wiki.emqbit.com/free-ecb-at91> Original patch from Nelson Castillo. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-15 20:10:11 +00:00
help
Select this if you are using emQbit's ECB_AT91 board.
<http://wiki.emqbit.com/free-ecb-at91>
[ARM] 5056/1: [AT91] Cleanup YL9200 board file Cleanup the YL9200 board-support file. Other things fixed are: - Use new-style UART initialization - Register all LEDs as gpio_leds. - NOR Flash error noted in comments fixed by increasing YL9200_FLASH_SIZE - The only I2C device is the AT24C eeprom. - Setup of NWAIT pin and programming of SMC controller for the LCD/VGA. - Configure touchscreen interrupt pin. Also adding the board to the KConfig and Makefile. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-24 16:06:45 +00:00
config MACH_YL9200
bool "ucDragon YL-9200"
help
Select this if you are using the ucDragon YL-9200 board.
ARM: 5630/1: Add support for Eukrea's CPUAT91 CPUAT91 is based on Atmel's AT91RM9200 with up to 16MB Strataflash, up to 128MB SDRAM and an ethernet PHY in RMII mode. Signed-off-by: Eric Benard <ebenard@eukrea.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30 06:23:42 +00:00
config MACH_CPUAT91
bool "Eukrea CPUAT91"
help
Select this if you are using the Eukrea Electromatique's
CPUAT91 board <http://www.eukrea.com/>.
ARM: 5782/1: at91: support for eco920 CONFIG_MACH_ECO920 is enabled in at91rm9200dk_defconfig. The name is wrong, but this is better than adding another defconfig or don't get compile coverage at all. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-03 19:39:02 +00:00
config MACH_ECO920
bool "eco920"
help
Select this if you are using the eco920 board
at91: add support for RSIs EWS board This adds support for the RSI EWS machine (at91rm9200-based), machine type 1609. Includes fixes as suggested by Uwe Kleine-König and cleanups as suggested by Russell and R.Schwebel. Signed-off-by: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> [nicolas.ferre@atmel.com: simplify board file header, move to at91_init_irq_default] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-08-02 11:28:42 +00:00
config MACH_RSI_EWS
bool "RSI Embedded Webserver"
depends on ARCH_AT91RM9200
help
Select this if you are using RSIs EWS board.
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9260
[ARM] 4192/1: AT91: Support for AT91SAM9XE processors. Add support for the Atmel AT91SAM9XE range of processors. These are basically AT91SAM9260's with different amounts of internal SRAM and Flash. We make use of the existing AT91SAM9260 support, but just perform run-time detection of the size of the internal SRAM. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15 07:17:38 +00:00
comment "AT91SAM9260 Variants"
comment "AT91SAM9260 / AT91SAM9XE Board Type"
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
[ARM] 3963/1: AT91: Update configuration files A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:51:13 +00:00
config MACH_AT91SAM9260EK
[ARM] 4192/1: AT91: Support for AT91SAM9XE processors. Add support for the Atmel AT91SAM9XE range of processors. These are basically AT91SAM9260's with different amounts of internal SRAM and Flash. We make use of the existing AT91SAM9260 support, but just perform run-time detection of the size of the internal SRAM. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15 07:17:38 +00:00
bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
select HAVE_AT91_DATAFLASH_CARD
[ARM] 3963/1: AT91: Update configuration files A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:51:13 +00:00
help
[ARM] 4192/1: AT91: Support for AT91SAM9XE processors. Add support for the Atmel AT91SAM9XE range of processors. These are basically AT91SAM9260's with different amounts of internal SRAM and Flash. We make use of the existing AT91SAM9260 support, but just perform run-time detection of the size of the internal SRAM. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-15 07:17:38 +00:00
Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
[ARM] 3963/1: AT91: Update configuration files A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:51:13 +00:00
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
[ARM] 4978/1: [AT91] KB9260 (CAM60) board support Support for the Kwikbyte KB9260 (CAM60) board. <http://www.kwikbyte.com/KB9260.html> Original patch from Kwikbyte. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-15 20:05:03 +00:00
config MACH_CAM60
bool "KwikByte KB9260 (CAM60) board"
help
Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
<http://www.kwikbyte.com/KB9260.html>
[ARM] 4979/1: [AT91] Olimex SAM9-L9260 board support Support for the Olimex SAM9-L9260 board. <http://www.olimex.com/dev/sam9-L9260.html> Original patch from Ivan Vasilev. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-15 20:07:08 +00:00
config MACH_SAM9_L9260
bool "Olimex SAM9-L9260 board"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
select HAVE_AT91_DATAFLASH_CARD
[ARM] 4979/1: [AT91] Olimex SAM9-L9260 board support Support for the Olimex SAM9-L9260 board. <http://www.olimex.com/dev/sam9-L9260.html> Original patch from Ivan Vasilev. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-15 20:07:08 +00:00
help
Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
<http://www.olimex.com/dev/sam9-L9260.html>
[ARM] 5210/2: AFEB9260: board support This patch adds support for AT91SAM9260-based board AFEB9260 which is a product from both Open Source design which runs Open Source software. Some commertial projects are made with this design. A board is basically AT91SAM9260-EK with some modifications and different peripherals and different parts used. Main purpose of this project is to gain experience in hardware design. More info: http://groups.google.com/group/arm9fpga-evolution-board (In Russian only, sorry). Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb By this patch only basic functionality is provided. Signed-off-by: Sergey Lapin <slapin@ossfans.org> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-03 01:29:48 +00:00
config MACH_AFEB9260
bool "Custom afeb9260 board v1"
help
Select this if you are using custom afeb9260 board based on
open hardware design. Select this for revision 1 of the board.
<svn://194.85.238.22/home/users/george/svn/arm9eb>
<http://groups.google.com/group/arm9fpga-evolution-board>
[ARM] 5057/1: [AT91] Calao Systems - board files Add support for three AT91-based boards available from Calao Systems: USB_A9260, USB_A9263 and QIL_A9260. Signed-off-by: Grégory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-24 16:47:04 +00:00
config MACH_USB_A9260
bool "CALAO USB-A9260"
help
Select this if you are using a Calao Systems USB-A9260.
<http://www.calao-systems.com>
config MACH_QIL_A9260
bool "CALAO QIL-A9260 board"
help
Select this if you are using a Calao Systems QIL-A9260 Board.
<http://www.calao-systems.com>
ARM: 5629/1: Add support for Eukrea's CPU9260 & CPU9G20 CPU9260 and CPU9G20 share the same PCB populated with either Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash, up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30 06:20:03 +00:00
config MACH_CPU9260
bool "Eukrea CPU9260 board"
help
Select this if you are using a Eukrea Electromatique's
CPU9260 Board <http://www.eukrea.com/>
ARM: 6393/1: AT91: Add flexibity board support This patch adds support for Flexibity Connect platform from http://www.flexibity.com/ (AT91SAM9260 based). Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-09-15 10:54:49 +00:00
config MACH_FLEXIBITY
bool "Flexibity Connect board"
help
Select this if you are using Flexibity Connect board
<http://www.flexibity.com>
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
endif
# ----------------------------------------------------------
if ARCH_AT91SAM9261
comment "AT91SAM9261 Board Type"
[ARM] 3963/1: AT91: Update configuration files A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:51:13 +00:00
config MACH_AT91SAM9261EK
bool "Atmel AT91SAM9261-EK Evaluation Kit"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
select HAVE_AT91_DATAFLASH_CARD
[ARM] 3963/1: AT91: Update configuration files A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:51:13 +00:00
help
Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
endif
[ARM] 3963/1: AT91: Update configuration files A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:51:13 +00:00
# ----------------------------------------------------------
[ARM] 5570/1: at91: Support for at91sam9g10: core chip & board support From: Hong Xu <hong.xu@atmel.com> Here are the modification to at91sam9261 files dedicated to the support of at91sam9g10. This direction has been adopted to minimize code duplication. All at91sam9261 drivers are enabled in _devices and board- files. Modificaton to peripherals that support at91sam9g10 will be added in future patches. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-26 14:37:01 +00:00
if ARCH_AT91SAM9G10
comment "AT91SAM9G10 Board Type"
config MACH_AT91SAM9G10EK
bool "Atmel AT91SAM9G10-EK Evaluation Kit"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
select HAVE_AT91_DATAFLASH_CARD
[ARM] 5570/1: at91: Support for at91sam9g10: core chip & board support From: Hong Xu <hong.xu@atmel.com> Here are the modification to at91sam9261 files dedicated to the support of at91sam9g10. This direction has been adopted to minimize code duplication. All at91sam9261 drivers are enabled in _devices and board- files. Modificaton to peripherals that support at91sam9g10 will be added in future patches. Signed-off-by: Hong Xu <hong.xu@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-26 14:37:01 +00:00
help
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
endif
# ----------------------------------------------------------
[ARM] 4146/1: AT91: Support for AT91SAM9263-EK board. Add support for the Atmel AT91SAM9263-EK board. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08 09:22:16 +00:00
if ARCH_AT91SAM9263
comment "AT91SAM9263 Board Type"
config MACH_AT91SAM9263EK
bool "Atmel AT91SAM9263-EK Evaluation Kit"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
select HAVE_AT91_DATAFLASH_CARD
[ARM] 4146/1: AT91: Support for AT91SAM9263-EK board. Add support for the Atmel AT91SAM9263-EK board. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08 09:22:16 +00:00
help
Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
[ARM] 5057/1: [AT91] Calao Systems - board files Add support for three AT91-based boards available from Calao Systems: USB_A9260, USB_A9263 and QIL_A9260. Signed-off-by: Grégory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-24 16:47:04 +00:00
config MACH_USB_A9263
bool "CALAO USB-A9263"
help
Select this if you are using a Calao Systems USB-A9263.
<http://www.calao-systems.com>
[ARM] 5290/1: [AT91] Add support for the Adeneo NeoCore 926 board Add support for the Adeneo NeoCore 926 board. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-06 19:13:53 +00:00
config MACH_NEOCORE926
bool "Adeneo NEOCORE926"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
select HAVE_AT91_DATAFLASH_CARD
[ARM] 5290/1: [AT91] Add support for the Adeneo NeoCore 926 board Add support for the Adeneo NeoCore 926 board. Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr> Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-06 19:13:53 +00:00
help
Select this if you are using the Adeneo Neocore 926 board.
[ARM] 4146/1: AT91: Support for AT91SAM9263-EK board. Add support for the Atmel AT91SAM9263-EK board. Original patch from Nicolas Ferre. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08 09:22:16 +00:00
endif
# ----------------------------------------------------------
[ARM] 4371/1: AT91: Support for Atmel AT91SAM9RL-EK development board Add support for the Atmel AT91SAM9RL-EK development board. Signed-off-by: Nicolas Ferre <nicolas.ferre@rfo.atmel.com> Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-11 18:24:18 +00:00
if ARCH_AT91SAM9RL
comment "AT91SAM9RL Board Type"
config MACH_AT91SAM9RLEK
bool "Atmel AT91SAM9RL-EK Evaluation Kit"
help
Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
endif
# ----------------------------------------------------------
[ARM] 5130/4: Support for the at91sam9g20 Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10 09:15:35 +00:00
if ARCH_AT91SAM9G20
comment "AT91SAM9G20 Board Type"
config MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
select HAVE_AT91_DATAFLASH_CARD
[ARM] 5130/4: Support for the at91sam9g20 Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10 09:15:35 +00:00
help
at91: at91sam9g20ek modify dual slot evaluation kit at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-20 14:32:53 +00:00
Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
that embeds only one SD/MMC slot.
config MACH_AT91SAM9G20EK_2MMC
AT91: at91sam9g20ek: merge 2mmc version in one board The board-sam9g20ek-2slot-mmc.c was a revision of the at91sam9g20ek since board revision C. It contains 2 sd/mmc slots. This merge keep the support of the old machine ID MACH_AT91SAM9G20EK_2MMC for backward compatibility. Now we use the ATAG to pass the hardware functionality to kernel with this board revision encoding bit 0: 0 => 1 sd/mmc slot 1 => 2 sd/mmc slots connectors (board from revision C) system_rev tested on Barebox commit d8f3ee103a9f4bd Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-21 16:01:37 +00:00
depends on MACH_AT91SAM9G20EK
at91: at91sam9g20ek modify dual slot evaluation kit at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-20 14:32:53 +00:00
bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
help
Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
onwards.
ARM: at91/Kconfig: website link for AT91SAM9G20-EK Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15 12:56:44 +00:00
<http://www.atmel.com/tools/SAM9G20-EK.aspx>
[ARM] 5130/4: Support for the at91sam9g20 Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10 09:15:35 +00:00
ARM: 5629/1: Add support for Eukrea's CPU9260 & CPU9G20 CPU9260 and CPU9G20 share the same PCB populated with either Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash, up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode. Signed-off-by: Eric Benard <eric@eukrea.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-30 06:20:03 +00:00
config MACH_CPU9G20
bool "Eukrea CPU9G20 board"
help
Select this if you are using a Eukrea Electromatique's
CPU9G20 Board <http://www.eukrea.com/>
AT91: Acme Systems FOX Board G20 board files Signed-off-by: Sergio Tanzilli <tanzilli@acmesystems.it> [nicolas.ferre@atmel.com: whitespace fixes, change machine name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-14 00:06:26 +00:00
config MACH_ACMENETUSFOXG20
bool "Acme Systems srl FOX Board G20"
help
Select this if you are using Acme Systems
FOX Board G20 <http://www.acmesystems.it>
ARM: 6054/1: AT91: taskit PortuxG20 and Stamp9G20 board support Both boards share the same board file, as the PortuxG20 is basically an SBC based on the Stamp9G20. Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-13 13:55:10 +00:00
config MACH_PORTUXG20
bool "taskit PortuxG20"
help
Select this if you are using taskit's PortuxG20.
<http://www.taskit.de/en/>
config MACH_STAMP9G20
bool "taskit Stamp9G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on its
evaluation board.
<http://www.taskit.de/en/>
AT91: add board support for Pcontrol_G20 Board is a carrier board for Stamp9G20, with additional peripherals for a building automation system Signed-off-by: Peter Gsellmann <pgsellmann@portner-elektronik.at> [nicolas.ferre@atmel.com: remove machine_desc.io_pg_offst and .phys_io] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-10-13 14:18:51 +00:00
config MACH_PCONTROL_G20
bool "PControl G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on this
carrier board, beeing the decentralized unit of a building automation
system; featuring nvram, eth-switch, iso-rs485, display, io
AT91: Support for gsia18s board The GS_IA18_S (GMS) is a carrier board from GeoSIG Ltd used with the Stamp9G20 SoM from Taskit company. It operate as an internet accelerometer. Signed-off-by: Igor Plyatov <plyatov@gmail.com> [nicolas.ferre@atmel.com: rm Kconfig, whitespace fixes, change machine name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-01-14 18:01:13 +00:00
config MACH_GSIA18S
bool "GS_IA18_S board"
help
This enables support for the GS_IA18_S board
produced by GeoSIG Ltd company. This is an internet accelerograph.
<http://www.geosig.com>
at91: USB-A9G20 C01 & C11 board support Add support for Calao USB-A9G20 boards. It will be integrated in existing support for board of same form factor using at91sam9260 or at91sam9263. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-08-30 16:25:53 +00:00
config MACH_USB_A9G20
bool "CALAO USB-A9G20"
depends on ARCH_AT91SAM9G20
help
Select this if you are using a Calao Systems USB-A9G20.
<http://www.calao-systems.com>
[ARM] 5130/4: Support for the at91sam9g20 Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10 09:15:35 +00:00
endif
ARM: 6209/2: at91: Add support for Bluewater Systems Snapper 9260/9G20 modules Add support for Bluewater Systems Snapper 9260/9G20 modules Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-07-06 20:48:53 +00:00
if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
comment "AT91SAM9260/AT91SAM9G20 boards"
config MACH_SNAPPER_9260
bool "Bluewater Systems Snapper 9260/9G20 module"
help
Select this if you are using the Bluewater Systems Snapper 9260 or
Snapper 9G20 modules.
<http://www.bluewatersys.com/>
endif
[ARM] 5130/4: Support for the at91sam9g20 Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-07-10 09:15:35 +00:00
# ----------------------------------------------------------
[ARM] 5572/1: at91: Support for at91sam9g45 series: core chip & board support Here are the at91 specific files dedicated to the at91sam9g45 series. They mimic the traditional at91 way of managing chips & boards. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In the future, the main board for this 9g45 series will be the AT91SAM9M10G45-EK (I choose this last name for the board file). Simple drivers are enabled in _devices and board- files. Newer peripheral support will be added in future patches. Incuded peripherals support (for now): - USART - SPI - Ethernet - NAND flash - LCD - gpio/joystick/buttons - leds and pwm Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-26 14:36:58 +00:00
if ARCH_AT91SAM9G45
comment "AT91SAM9G45 Board Type"
AT91: at91sam9m10g45ek: use the right machine id Today the board use 2 machines id AT91SAM9G45EKES and AT91SAM9M10G45EK now will use only AT91SAM9M10G45EK. The other boards revision will be specified via system_rev. for 9g45ekes, m10g45ekes and m10g45ek boards and revisions Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2010-09-22 05:55:59 +00:00
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
[ARM] 5572/1: at91: Support for at91sam9g45 series: core chip & board support Here are the at91 specific files dedicated to the at91sam9g45 series. They mimic the traditional at91 way of managing chips & boards. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In the future, the main board for this 9g45 series will be the AT91SAM9M10G45-EK (I choose this last name for the board file). Simple drivers are enabled in _devices and board- files. Newer peripheral support will be added in future patches. Incuded peripherals support (for now): - USART - SPI - Ethernet - NAND flash - LCD - gpio/joystick/buttons - leds and pwm Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-26 14:36:58 +00:00
help
ARM: at91/Kconfig: add clarifications to AT91SAM9M10G45-EK entry Add clarifications about the SoCs that can be found on an AT91SAM9M10G45-EK board. Add also the web link to this board on Atmel's website. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-03-15 11:57:03 +00:00
Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
<http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
[ARM] 5572/1: at91: Support for at91sam9g45 series: core chip & board support Here are the at91 specific files dedicated to the at91sam9g45 series. They mimic the traditional at91 way of managing chips & boards. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In the future, the main board for this 9g45 series will be the AT91SAM9M10G45-EK (I choose this last name for the board file). Simple drivers are enabled in _devices and board- files. Newer peripheral support will be added in future patches. Incuded peripherals support (for now): - USART - SPI - Ethernet - NAND flash - LCD - gpio/joystick/buttons - leds and pwm Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-06-26 14:36:58 +00:00
endif
# ----------------------------------------------------------
[ARM] 4536/1: configure support for AT91x40 and EB01 Configuration support for the AT91x40 CPU and EB01 board. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-30 01:39:21 +00:00
if ARCH_AT91X40
comment "AT91X40 Board Type"
config MACH_AT91EB01
bool "Atmel AT91EB01 Evaluation Kit"
help
Select this if you are using Atmel's AT91EB01 Evaluation Kit.
It is also a popular target for simulators such as GDB's
ARM simulator (commonly known as the ARMulator) and the
Skyeye simulator.
endif
# ----------------------------------------------------------
ARM: at91: dt: at91sam9g45 family and board device tree files Create a new device tree source file for Atmel at91sam9g45 SoC family. The Evaluation Kit at91sam9m10g45ek includes it. This first basic support will be populated as drivers and boards will be converted to device tree. Contains serial, dma and interrupt controllers. The generic board file still takes advantage of platform data for early serial init. As we need a storage media and the NAND flash driver is not converted to DT yet, we keep old initialization for it. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Rob Herring <rob.herring@calxeda.com>
2011-10-10 16:29:24 +00:00
comment "Generic Board Type"
config MACH_AT91SAM_DT
bool "Atmel AT91SAM Evaluation Kits with device-tree support"
select USE_OF
help
Select this if you want to experiment device-tree with
an Atmel Evaluation Kit.
# ----------------------------------------------------------
[ARM] 3963/1: AT91: Update configuration files A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:51:13 +00:00
comment "AT91 Board Options"
config MTD_AT91_DATAFLASH_CARD
bool "Enable DataFlash Card support"
at91: Kconfig simplification Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-10-22 16:50:26 +00:00
depends on HAVE_AT91_DATAFLASH_CARD
[ARM] 3963/1: AT91: Update configuration files A number of configuration file changes. These are mainly to replace references to ARCH_AT91RM9200 and ARCH_AT91SAM9261 with the common/generic ARCH_AT91. That way we don't need to mention every specific AT91 processor explicitly. Also adds the configuration option for AT91SAM9260-EK and AT91SAM9261-EK boards. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-01 13:51:13 +00:00
help
Enable support for the DataFlash card.
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
# ----------------------------------------------------------
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
[ARM] 3675/2: Preparing for AT91SAM926 support Patch from Andrew Victor This prepares the way for adding support for the new Atmel AT91SAM926x processors. Major changes: - Rename time.c to at91rm9200_time.c - Rename common.c to at91rm9200.c - Introduce ARCH_AT91, of which ARCH_AT91RM9200, ARCH_AT91SAM9260 and ARCH_AT91SAM9261 are dependent. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29 15:06:33 +00:00
comment "AT91 Feature Selections"
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
config AT91_PROGRAMMABLE_CLOCKS
bool "Programmable Clocks"
help
Select this if you need to program one or more of the PCK0..PCK3
programmable clock outputs.
[ARM] 5264/2: [AT91] Suspend-to-RAM disables main oscillator This patch adds support for a low(er)-power suspend-to-RAM. In addition to the SDRAM being put into self-refresh mode, the Master Clock is set to the Slow-clock rate (32Khz) and PLLA & PLLB are disabled. Certain peripherals are therefore also disabled, and thus cannot be used as wakeup sources. This patch has been included in the AT91 patches in various forms since 2.6.19 and a number of people have worked or commented on it, most notably: Savin Zlobec (for the original AT91RM9200 support) Anti Sullin (for the SAM9260 version) David Brownell, etc. Signed-off-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-09-21 20:35:18 +00:00
config AT91_SLOW_CLOCK
bool "Suspend-to-RAM disables main oscillator"
depends on SUSPEND
help
Select this if you want Suspend-to-RAM to save the most power
possible (without powering off the CPU) by disabling the PLLs
and main oscillator so that only the 32 KiHz clock is available.
When only that slow-clock is available, some peripherals lose
functionality. Many can't issue wakeup events unless faster
clocks are available. Some lose their operating state and
need to be completely re-initialized.
[ARM] 4646/1: AT91: configurable HZ, default to 128 This makes HZ configurable on AT91, following the model used on OMAP. It defaults to a power of two on AT91rm9200 chips, avoiding rounding errors which come from dividing a 32 KiHz clock to generate scheduler irqs; and uses 100 on AT91sam926x chips, using MCK/16 (multi-MHZ). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Remy Bhmer <linux@bohmer.net> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-12 16:59:10 +00:00
config AT91_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
depends on ARCH_AT91
default "128" if ARCH_AT91RM9200
default "100"
help
On AT91rm9200 chips where you're using a system clock derived
from the 32768 Hz hardware clock, this tick rate should divide
it exactly: use a power-of-two value, such as 128 or 256, to
reduce timing errors caused by rounding.
On AT91sam926x chips, or otherwise when using a higher precision
system clock (of at least several MHz), rounding is less of a
problem so it can be safer to use a decimal values like 100.
[ARM] 3240/2: AT91RM9200 support for 2.6 (Core) Patch from SAN People Following changes were made to clock.c: 1) Replaced <asm/hardware/clock.h> with <linux/clk.h> 2) Removed old unused clk_enable & clk_disable. 3) Replaced clk_use/clk_unuse with clk_enable/clk_disable. Otherwise it's the same as the previous patch. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09 17:05:41 +00:00
endmenu
endif
Reference in New Issue Copy Permalink