linux/include/drm/drm_crtc.h

1181 lines
42 KiB
C
Raw Normal View History

/*
* Copyright © 2006 Keith Packard
* Copyright © 2007-2008 Dave Airlie
* Copyright © 2007-2008 Intel Corporation
* Jesse Barnes <jesse.barnes@intel.com>
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#ifndef __DRM_CRTC_H__
#define __DRM_CRTC_H__
#include <linux/i2c.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/idr.h>
#include <linux/fb.h>
#include <drm/drm_mode.h>
#include <drm/drm_fourcc.h>
struct drm_device;
struct drm_mode_set;
struct drm_framebuffer;
struct drm_object_properties;
struct drm_file;
struct drm_clip_rect;
#define DRM_MODE_OBJECT_CRTC 0xcccccccc
#define DRM_MODE_OBJECT_CONNECTOR 0xc0c0c0c0
#define DRM_MODE_OBJECT_ENCODER 0xe0e0e0e0
#define DRM_MODE_OBJECT_MODE 0xdededede
#define DRM_MODE_OBJECT_PROPERTY 0xb0b0b0b0
#define DRM_MODE_OBJECT_FB 0xfbfbfbfb
#define DRM_MODE_OBJECT_BLOB 0xbbbbbbbb
#define DRM_MODE_OBJECT_PLANE 0xeeeeeeee
#define DRM_MODE_OBJECT_BRIDGE 0xbdbdbdbd
struct drm_mode_object {
uint32_t id;
uint32_t type;
struct drm_object_properties *properties;
};
#define DRM_OBJECT_MAX_PROPERTY 24
struct drm_object_properties {
int count;
uint32_t ids[DRM_OBJECT_MAX_PROPERTY];
uint64_t values[DRM_OBJECT_MAX_PROPERTY];
};
/*
* Note on terminology: here, for brevity and convenience, we refer to connector
* control chips as 'CRTCs'. They can control any type of connector, VGA, LVDS,
* DVI, etc. And 'screen' refers to the whole of the visible display, which
* may span multiple monitors (and therefore multiple CRTC and connector
* structures).
*/
enum drm_mode_status {
MODE_OK = 0, /* Mode OK */
MODE_HSYNC, /* hsync out of range */
MODE_VSYNC, /* vsync out of range */
MODE_H_ILLEGAL, /* mode has illegal horizontal timings */
MODE_V_ILLEGAL, /* mode has illegal horizontal timings */
MODE_BAD_WIDTH, /* requires an unsupported linepitch */
MODE_NOMODE, /* no mode with a matching name */
MODE_NO_INTERLACE, /* interlaced mode not supported */
MODE_NO_DBLESCAN, /* doublescan mode not supported */
MODE_NO_VSCAN, /* multiscan mode not supported */
MODE_MEM, /* insufficient video memory */
MODE_VIRTUAL_X, /* mode width too large for specified virtual size */
MODE_VIRTUAL_Y, /* mode height too large for specified virtual size */
MODE_MEM_VIRT, /* insufficient video memory given virtual size */
MODE_NOCLOCK, /* no fixed clock available */
MODE_CLOCK_HIGH, /* clock required is too high */
MODE_CLOCK_LOW, /* clock required is too low */
MODE_CLOCK_RANGE, /* clock/mode isn't in a ClockRange */
MODE_BAD_HVALUE, /* horizontal timing was out of range */
MODE_BAD_VVALUE, /* vertical timing was out of range */
MODE_BAD_VSCAN, /* VScan value out of range */
MODE_HSYNC_NARROW, /* horizontal sync too narrow */
MODE_HSYNC_WIDE, /* horizontal sync too wide */
MODE_HBLANK_NARROW, /* horizontal blanking too narrow */
MODE_HBLANK_WIDE, /* horizontal blanking too wide */
MODE_VSYNC_NARROW, /* vertical sync too narrow */
MODE_VSYNC_WIDE, /* vertical sync too wide */
MODE_VBLANK_NARROW, /* vertical blanking too narrow */
MODE_VBLANK_WIDE, /* vertical blanking too wide */
MODE_PANEL, /* exceeds panel dimensions */
MODE_INTERLACE_WIDTH, /* width too large for interlaced mode */
MODE_ONE_WIDTH, /* only one width is supported */
MODE_ONE_HEIGHT, /* only one height is supported */
MODE_ONE_SIZE, /* only one resolution is supported */
MODE_NO_REDUCED, /* monitor doesn't accept reduced blanking */
MODE_NO_STEREO, /* stereo modes not supported */
MODE_UNVERIFIED = -3, /* mode needs to reverified */
MODE_BAD = -2, /* unspecified reason */
MODE_ERROR = -1 /* error condition */
};
#define DRM_MODE_TYPE_CLOCK_CRTC_C (DRM_MODE_TYPE_CLOCK_C | \
DRM_MODE_TYPE_CRTC_C)
#define DRM_MODE(nm, t, c, hd, hss, hse, ht, hsk, vd, vss, vse, vt, vs, f) \
.name = nm, .status = 0, .type = (t), .clock = (c), \
.hdisplay = (hd), .hsync_start = (hss), .hsync_end = (hse), \
.htotal = (ht), .hskew = (hsk), .vdisplay = (vd), \
.vsync_start = (vss), .vsync_end = (vse), .vtotal = (vt), \
.vscan = (vs), .flags = (f), \
.base.type = DRM_MODE_OBJECT_MODE
#define CRTC_INTERLACE_HALVE_V (1 << 0) /* halve V values for interlacing */
#define CRTC_STEREO_DOUBLE (1 << 1) /* adjust timings for stereo modes */
#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
struct drm_display_mode {
/* Header */
struct list_head head;
struct drm_mode_object base;
char name[DRM_DISPLAY_MODE_LEN];
enum drm_mode_status status;
unsigned int type;
/* Proposed mode values */
int clock; /* in kHz */
int hdisplay;
int hsync_start;
int hsync_end;
int htotal;
int hskew;
int vdisplay;
int vsync_start;
int vsync_end;
int vtotal;
int vscan;
unsigned int flags;
/* Addressable image size (may be 0 for projectors, etc.) */
int width_mm;
int height_mm;
/* Actual mode we give to hw */
int crtc_clock; /* in KHz */
int crtc_hdisplay;
int crtc_hblank_start;
int crtc_hblank_end;
int crtc_hsync_start;
int crtc_hsync_end;
int crtc_htotal;
int crtc_hskew;
int crtc_vdisplay;
int crtc_vblank_start;
int crtc_vblank_end;
int crtc_vsync_start;
int crtc_vsync_end;
int crtc_vtotal;
/* Driver private mode info */
int private_size;
int *private;
int private_flags;
int vrefresh; /* in Hz */
int hsync; /* in kHz */
};
static inline bool drm_mode_is_stereo(const struct drm_display_mode *mode)
{
return mode->flags & DRM_MODE_FLAG_3D_MASK;
}
enum drm_connector_status {
connector_status_connected = 1,
connector_status_disconnected = 2,
connector_status_unknown = 3,
};
enum subpixel_order {
SubPixelUnknown = 0,
SubPixelHorizontalRGB,
SubPixelHorizontalBGR,
SubPixelVerticalRGB,
SubPixelVerticalBGR,
SubPixelNone,
};
#define DRM_COLOR_FORMAT_RGB444 (1<<0)
#define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
/*
* Describes a given display (e.g. CRT or flat panel) and its limitations.
*/
struct drm_display_info {
char name[DRM_DISPLAY_INFO_LEN];
/* Physical size */
unsigned int width_mm;
unsigned int height_mm;
/* Clock limits FIXME: storage format */
unsigned int min_vfreq, max_vfreq;
unsigned int min_hfreq, max_hfreq;
unsigned int pixel_clock;
unsigned int bpc;
enum subpixel_order subpixel_order;
u32 color_formats;
u8 cea_rev;
};
struct drm_framebuffer_funcs {
/* note: use drm_framebuffer_remove() */
void (*destroy)(struct drm_framebuffer *framebuffer);
int (*create_handle)(struct drm_framebuffer *fb,
struct drm_file *file_priv,
unsigned int *handle);
/**
* Optinal callback for the dirty fb ioctl.
*
* Userspace can notify the driver via this callback
* that a area of the framebuffer has changed and should
* be flushed to the display hardware.
*
* See documentation in drm_mode.h for the struct
* drm_mode_fb_dirty_cmd for more information as all
* the semantics and arguments have a one to one mapping
* on this function.
*/
int (*dirty)(struct drm_framebuffer *framebuffer,
struct drm_file *file_priv, unsigned flags,
unsigned color, struct drm_clip_rect *clips,
unsigned num_clips);
};
struct drm_framebuffer {
struct drm_device *dev;
/*
* Note that the fb is refcounted for the benefit of driver internals,
* for example some hw, disabling a CRTC/plane is asynchronous, and
* scanout does not actually complete until the next vblank. So some
* cleanup (like releasing the reference(s) on the backing GEM bo(s))
* should be deferred. In cases like this, the driver would like to
* hold a ref to the fb even though it has already been removed from
* userspace perspective.
*/
struct kref refcount;
drm: revamp locking around fb creation/destruction Well, at least step 1. The goal here is that framebuffer objects can survive outside of the mode_config lock, with just a reference held as protection. The first step to get there is to introduce a special fb_lock which protects fb lookup, creation and destruction, to make them appear atomic. This new fb_lock can nest within the mode_config lock. But the idea is (once the reference counting part is completed) that we only quickly take that fb_lock to lookup a framebuffer and grab a reference, without any other locks involved. vmwgfx is the only driver which does framebuffer lookups itself, also wrap those calls to drm_mode_object_find with the new lock. Also protect the fb_list walking in i915 and omapdrm with the new lock. As a slight complication there's also the list of user-created fbs attached to the file private. The problem now is that at fclose() time we need to walk that list, eventually do a modeset call to remove the fb from active usage (and are required to be able to take the mode_config lock), but in the end we need to grab the new fb_lock to remove the fb from the list. The easiest solution is to add another mutex to protect this per-file list. Currently that new fbs_lock nests within the modeset locks and so appears redudant. But later patches will switch around this sequence so that taking the modeset locks in the fb destruction path is optional in the fastpath. Ultimately the goal is that addfb and rmfb do not require the mode_config lock, since otherwise they have the potential to introduce stalls in the pageflip sequence of a compositor (if the compositor e.g. switches to a fullscreen client or if it enables a plane). But that requires a few more steps and hoops to jump through. Note that framebuffer creation/destruction is now double-protected - once by the fb_lock and in parts by the idr_lock. The later would be unnecessariy if framebuffers would have their own idr allocator. But that's material for another patch (series). v2: Properly initialize the fb->filp_head list in _init, otherwise the newly added WARN to check whether the fb isn't on a fpriv list any more will fail for driver-private objects. v3: Fixup two error-case unlock bugs spotted by Richard Wilbur. Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-10 20:19:18 +00:00
/*
* Place on the dev->mode_config.fb_list, access protected by
* dev->mode_config.fb_lock.
*/
struct list_head head;
struct drm_mode_object base;
const struct drm_framebuffer_funcs *funcs;
unsigned int pitches[4];
unsigned int offsets[4];
unsigned int width;
unsigned int height;
/* depth can be 15 or 16 */
unsigned int depth;
int bits_per_pixel;
int flags;
uint32_t pixel_format; /* fourcc format */
struct list_head filp_head;
/* if you are using the helper */
void *helper_private;
};
struct drm_property_blob {
struct drm_mode_object base;
struct list_head head;
unsigned int length;
unsigned char data[];
};
struct drm_property_enum {
uint64_t value;
struct list_head head;
char name[DRM_PROP_NAME_LEN];
};
struct drm_property {
struct list_head head;
struct drm_mode_object base;
uint32_t flags;
char name[DRM_PROP_NAME_LEN];
uint32_t num_values;
uint64_t *values;
struct list_head enum_blob_list;
};
struct drm_crtc;
struct drm_connector;
struct drm_encoder;
struct drm_pending_vblank_event;
struct drm_plane;
struct drm_bridge;
/**
* drm_crtc_funcs - control CRTCs for a given device
* @save: save CRTC state
* @restore: restore CRTC state
* @reset: reset CRTC after state has been invalidated (e.g. resume)
* @cursor_set: setup the cursor
* @cursor_move: move the cursor
* @gamma_set: specify color ramp for CRTC
* @destroy: deinit and free object
* @set_property: called when a property is changed
* @set_config: apply a new CRTC configuration
* @page_flip: initiate a page flip
*
* The drm_crtc_funcs structure is the central CRTC management structure
* in the DRM. Each CRTC controls one or more connectors (note that the name
* CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc.
* connectors, not just CRTs).
*
* Each driver is responsible for filling out this structure at startup time,
* in addition to providing other modesetting features, like i2c and DDC
* bus accessors.
*/
struct drm_crtc_funcs {
/* Save CRTC state */
void (*save)(struct drm_crtc *crtc); /* suspend? */
/* Restore CRTC state */
void (*restore)(struct drm_crtc *crtc); /* resume? */
/* Reset CRTC state */
void (*reset)(struct drm_crtc *crtc);
/* cursor controls */
int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv,
uint32_t handle, uint32_t width, uint32_t height);
int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv,
uint32_t handle, uint32_t width, uint32_t height,
int32_t hot_x, int32_t hot_y);
int (*cursor_move)(struct drm_crtc *crtc, int x, int y);
/* Set gamma on the CRTC */
void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
uint32_t start, uint32_t size);
/* Object destroy routine */
void (*destroy)(struct drm_crtc *crtc);
int (*set_config)(struct drm_mode_set *set);
/*
* Flip to the given framebuffer. This implements the page
* flip ioctl described in drm_mode.h, specifically, the
* implementation must return immediately and block all
* rendering to the current fb until the flip has completed.
* If userspace set the event flag in the ioctl, the event
* argument will point to an event to send back when the flip
* completes, otherwise it will be NULL.
*/
int (*page_flip)(struct drm_crtc *crtc,
struct drm_framebuffer *fb,
struct drm_pending_vblank_event *event,
uint32_t flags);
int (*set_property)(struct drm_crtc *crtc,
struct drm_property *property, uint64_t val);
};
/**
* drm_crtc - central CRTC control structure
* @dev: parent DRM device
* @head: list management
* @base: base KMS object for ID tracking etc.
* @enabled: is this CRTC enabled?
* @mode: current mode timings
* @hwmode: mode timings as programmed to hw regs
* @invert_dimensions: for purposes of error checking crtc vs fb sizes,
* invert the width/height of the crtc. This is used if the driver
* is performing 90 or 270 degree rotated scanout
* @x: x position on screen
* @y: y position on screen
* @funcs: CRTC control functions
* @gamma_size: size of gamma ramp
* @gamma_store: gamma ramp values
* @framedur_ns: precise frame timing
* @framedur_ns: precise line timing
* @pixeldur_ns: precise pixel timing
* @helper_private: mid-layer private data
* @properties: property tracking for this CRTC
*
* Each CRTC may have one or more connectors associated with it. This structure
* allows the CRTC to be controlled.
*/
struct drm_crtc {
struct drm_device *dev;
struct list_head head;
drm: add per-crtc locks *drumroll* The basic idea is to protect per-crtc state which can change without touching the output configuration with separate mutexes, i.e. all the input side state to a crtc like framebuffers, cursor settings or plane configuration. Holding such a crtc lock gives a read-lock on all the other crtc state which can be changed by e.g. a modeset. All non-crtc state is still protected by the mode_config mutex. Callers that need to change modeset state of a crtc (e.g. dpms or set_mode) need to grab both the mode_config lock and nested within any crtc locks. Note that since there can only ever be one holder of the mode_config lock we can grab the subordinate crtc locks in any order (if we need to grab more than one of them). Lockdep can handle such nesting with the mutex_lock_nest_lock call correctly. With this functions that only touch connectors/encoders but not crtcs only need to take the mode_config lock. The biggest such case is the output probing, which means that we can now pageflip and move cursors while the output probe code is reading an edid. Most cases neatly fall into the three buckets: - Only touches connectors and similar output state and so only needs the mode_config lock. - Touches the global configuration and so needs all locks. - Only touches the crtc input side and so only needs the crtc lock. But a few cases that need special consideration: - Load detection which requires a crtc. The mode_config lock already prevents a modeset change, so we can use any unused crtc as we like to do load detection. The only thing to consider is that such temporary state changes don't leak out to userspace through ioctls that only take the crtc look (like a pageflip). Hence the load detect code needs to grab the crtc of any output pipes it touches (but only if it touches state used by the pageflip or cursor ioctls). - Atomic pageflip when moving planes. The first case is sane hw, where planes have a fixed association with crtcs - nothing needs to be done there. More insane^Wflexible hw needs to have plane->crtc mapping which is separately protect with a lock that nests within the crtc lock. If the plane is unused we can just assign it to the current crtc and continue. But if a plane is already in use by another crtc we can't just reassign it. Two solution present themselves: Either go back to a slow-path which takes all modeset locks, potentially incure quite a hefty delay. Or simply disallowing such changes in one atomic pageflip - in general the vblanks of two crtcs are not synced, so there's no sane way to atomically flip such plane changes accross more than one crtc. I'd heavily favour the later approach, going as far as mandating it as part of the ABI of such a new a nuclear pageflip. And if we _really_ want such semantics, we can always get them by introducing another pageflip mutex between the mode_config.mutex and the individual crtc locks. Pageflips crossing more than one crtc would then need to take that lock first, to lock out concurrent multi-crtc pageflips. - Optimized global modeset operations: We could just take the mode_config lock and then lazily lock all crtc which are affected by a modeset operation. This has the advantage that pageflip could continue unhampered on unaffected crtc. But if e.g. global resources like plls need to be reassigned and so affect unrelated crtcs we can still do that - nested locking works in any order. This patch just adds the locks and takes them in drm_modeset_lock_all, no real locking changes yet. v2: Need to initialize the new lock in crtc_init and lock it righ away, for otherwise the modeset_unlock_all below will try to unlock a not-locked mutex. Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-02 01:18:25 +00:00
/**
* crtc mutex
*
* This provides a read lock for the overall crtc state (mode, dpms
* state, ...) and a write lock for everything which can be update
* without a full modeset (fb, cursor data, ...)
*/
struct mutex mutex;
struct drm_mode_object base;
/* framebuffer the connector is currently bound to */
struct drm_framebuffer *fb;
/* Temporary tracking of the old fb while a modeset is ongoing. Used
* by drm_mode_set_config_internal to implement correct refcounting. */
struct drm_framebuffer *old_fb;
bool enabled;
drm/vblank: Add support for precise vblank timestamping. The DRI2 swap & sync implementation needs precise vblank counts and precise timestamps corresponding to those vblank counts. For conformance to the OpenML OML_sync_control extension specification the DRM timestamp associated with a vblank count should correspond to the start of video scanout of the first scanline of the video frame following the vblank interval for that vblank count. Therefore we need to carry around precise timestamps for vblanks. Currently the DRM and KMS drivers generate timestamps ad-hoc via do_gettimeofday() in some places. The resulting timestamps are sometimes not very precise due to interrupt handling delays, they don't conform to OML_sync_control and some are wrong, as they aren't taken synchronized to the vblank. This patch implements support inside the drm core for precise and robust timestamping. It consists of the following interrelated pieces. 1. Vblank timestamp caching: A per-crtc ringbuffer stores the most recent vblank timestamps corresponding to vblank counts. The ringbuffer can be read out lock-free via the accessor function: struct timeval timestamp; vblankcount = drm_vblank_count_and_time(dev, crtcid, &timestamp). The function returns the current vblank count and the corresponding timestamp for start of video scanout following the vblank interval. It can be used anywhere between enclosing drm_vblank_get(dev, crtcid) and drm_vblank_put(dev,crtcid) statements. It is used inside the drmWaitVblank ioctl and in the vblank event queueing and handling. It should be used by kms drivers for timestamping of bufferswap completion. The timestamp ringbuffer is reinitialized each time vblank irq's get reenabled in drm_vblank_get()/ drm_update_vblank_count(). It is invalidated when vblank irq's get disabled. The ringbuffer is updated inside drm_handle_vblank() at each vblank irq. 2. Calculation of precise vblank timestamps: drm_get_last_vbltimestamp() is used to compute the timestamp for the end of the most recent vblank (if inside active scanout), or the expected end of the current vblank interval (if called inside a vblank interval). The function calls into a new optional kms driver entry point dev->driver->get_vblank_timestamp() which is supposed to provide the precise timestamp. If a kms driver doesn't implement the entry point or if the call fails, a simple do_gettimeofday() timestamp is returned as crude approximation of the true vblank time. A new drm module parameter drm.timestamp_precision_usec allows to disable high precision timestamps (if set to zero) or to specify the maximum acceptable error in the timestamps in microseconds. Kms drivers could implement their get_vblank_timestamp() function in a gpu specific way, as long as returned timestamps conform to OML_sync_control, e.g., by use of gpu specific hardware timestamps. Optionally, kms drivers can simply wrap and use the new utility function drm_calc_vbltimestamp_from_scanoutpos(). This function calls a new optional kms driver function dev->driver->get_scanout_position() which returns the current horizontal and vertical video scanout position of the crtc. The scanout position together with the drm_display_timing of the current video mode is used to calculate elapsed time relative to start of active scanout for the current video frame. This elapsed time is subtracted from the current do_gettimeofday() time to get the timestamp corresponding to start of video scanout. Currently non-interlaced, non-doublescan video modes, with or without panel scaling are handled correctly. Interlaced/ doublescan modes are tbd in a future patch. 3. Filtering of redundant vblank irq's and removal of some race-conditions in the vblank irq enable/disable path: Some gpu's (e.g., Radeon R500/R600) send spurious vblank irq's outside the vblank if vblank irq's get reenabled. These get detected by use of the vblank timestamps and filtered out to avoid miscounting of vblanks. Some race-conditions between the vblank irq enable/disable functions, the vblank irq handler and the gpu itself (updating its hardware vblank counter in the "wrong" moment) are fixed inside vblank_disable_and_save() and drm_update_vblank_count() by use of the vblank timestamps and a new spinlock dev->vblank_time_lock. The time until vblank irq disable is now configurable via a new drm module parameter drm.vblankoffdelay to allow experimentation with timeouts that are much shorter than the current 5 seconds and should allow longer vblank off periods for better power savings. Followup patches will use these new functions to implement precise timestamping for the intel and radeon kms drivers. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-23 02:20:23 +00:00
/* Requested mode from modesetting. */
struct drm_display_mode mode;
drm/vblank: Add support for precise vblank timestamping. The DRI2 swap & sync implementation needs precise vblank counts and precise timestamps corresponding to those vblank counts. For conformance to the OpenML OML_sync_control extension specification the DRM timestamp associated with a vblank count should correspond to the start of video scanout of the first scanline of the video frame following the vblank interval for that vblank count. Therefore we need to carry around precise timestamps for vblanks. Currently the DRM and KMS drivers generate timestamps ad-hoc via do_gettimeofday() in some places. The resulting timestamps are sometimes not very precise due to interrupt handling delays, they don't conform to OML_sync_control and some are wrong, as they aren't taken synchronized to the vblank. This patch implements support inside the drm core for precise and robust timestamping. It consists of the following interrelated pieces. 1. Vblank timestamp caching: A per-crtc ringbuffer stores the most recent vblank timestamps corresponding to vblank counts. The ringbuffer can be read out lock-free via the accessor function: struct timeval timestamp; vblankcount = drm_vblank_count_and_time(dev, crtcid, &timestamp). The function returns the current vblank count and the corresponding timestamp for start of video scanout following the vblank interval. It can be used anywhere between enclosing drm_vblank_get(dev, crtcid) and drm_vblank_put(dev,crtcid) statements. It is used inside the drmWaitVblank ioctl and in the vblank event queueing and handling. It should be used by kms drivers for timestamping of bufferswap completion. The timestamp ringbuffer is reinitialized each time vblank irq's get reenabled in drm_vblank_get()/ drm_update_vblank_count(). It is invalidated when vblank irq's get disabled. The ringbuffer is updated inside drm_handle_vblank() at each vblank irq. 2. Calculation of precise vblank timestamps: drm_get_last_vbltimestamp() is used to compute the timestamp for the end of the most recent vblank (if inside active scanout), or the expected end of the current vblank interval (if called inside a vblank interval). The function calls into a new optional kms driver entry point dev->driver->get_vblank_timestamp() which is supposed to provide the precise timestamp. If a kms driver doesn't implement the entry point or if the call fails, a simple do_gettimeofday() timestamp is returned as crude approximation of the true vblank time. A new drm module parameter drm.timestamp_precision_usec allows to disable high precision timestamps (if set to zero) or to specify the maximum acceptable error in the timestamps in microseconds. Kms drivers could implement their get_vblank_timestamp() function in a gpu specific way, as long as returned timestamps conform to OML_sync_control, e.g., by use of gpu specific hardware timestamps. Optionally, kms drivers can simply wrap and use the new utility function drm_calc_vbltimestamp_from_scanoutpos(). This function calls a new optional kms driver function dev->driver->get_scanout_position() which returns the current horizontal and vertical video scanout position of the crtc. The scanout position together with the drm_display_timing of the current video mode is used to calculate elapsed time relative to start of active scanout for the current video frame. This elapsed time is subtracted from the current do_gettimeofday() time to get the timestamp corresponding to start of video scanout. Currently non-interlaced, non-doublescan video modes, with or without panel scaling are handled correctly. Interlaced/ doublescan modes are tbd in a future patch. 3. Filtering of redundant vblank irq's and removal of some race-conditions in the vblank irq enable/disable path: Some gpu's (e.g., Radeon R500/R600) send spurious vblank irq's outside the vblank if vblank irq's get reenabled. These get detected by use of the vblank timestamps and filtered out to avoid miscounting of vblanks. Some race-conditions between the vblank irq enable/disable functions, the vblank irq handler and the gpu itself (updating its hardware vblank counter in the "wrong" moment) are fixed inside vblank_disable_and_save() and drm_update_vblank_count() by use of the vblank timestamps and a new spinlock dev->vblank_time_lock. The time until vblank irq disable is now configurable via a new drm module parameter drm.vblankoffdelay to allow experimentation with timeouts that are much shorter than the current 5 seconds and should allow longer vblank off periods for better power savings. Followup patches will use these new functions to implement precise timestamping for the intel and radeon kms drivers. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-23 02:20:23 +00:00
/* Programmed mode in hw, after adjustments for encoders,
* crtc, panel scaling etc. Needed for timestamping etc.
*/
struct drm_display_mode hwmode;
bool invert_dimensions;
int x, y;
const struct drm_crtc_funcs *funcs;
/* CRTC gamma size for reporting to userspace */
uint32_t gamma_size;
uint16_t *gamma_store;
drm/vblank: Add support for precise vblank timestamping. The DRI2 swap & sync implementation needs precise vblank counts and precise timestamps corresponding to those vblank counts. For conformance to the OpenML OML_sync_control extension specification the DRM timestamp associated with a vblank count should correspond to the start of video scanout of the first scanline of the video frame following the vblank interval for that vblank count. Therefore we need to carry around precise timestamps for vblanks. Currently the DRM and KMS drivers generate timestamps ad-hoc via do_gettimeofday() in some places. The resulting timestamps are sometimes not very precise due to interrupt handling delays, they don't conform to OML_sync_control and some are wrong, as they aren't taken synchronized to the vblank. This patch implements support inside the drm core for precise and robust timestamping. It consists of the following interrelated pieces. 1. Vblank timestamp caching: A per-crtc ringbuffer stores the most recent vblank timestamps corresponding to vblank counts. The ringbuffer can be read out lock-free via the accessor function: struct timeval timestamp; vblankcount = drm_vblank_count_and_time(dev, crtcid, &timestamp). The function returns the current vblank count and the corresponding timestamp for start of video scanout following the vblank interval. It can be used anywhere between enclosing drm_vblank_get(dev, crtcid) and drm_vblank_put(dev,crtcid) statements. It is used inside the drmWaitVblank ioctl and in the vblank event queueing and handling. It should be used by kms drivers for timestamping of bufferswap completion. The timestamp ringbuffer is reinitialized each time vblank irq's get reenabled in drm_vblank_get()/ drm_update_vblank_count(). It is invalidated when vblank irq's get disabled. The ringbuffer is updated inside drm_handle_vblank() at each vblank irq. 2. Calculation of precise vblank timestamps: drm_get_last_vbltimestamp() is used to compute the timestamp for the end of the most recent vblank (if inside active scanout), or the expected end of the current vblank interval (if called inside a vblank interval). The function calls into a new optional kms driver entry point dev->driver->get_vblank_timestamp() which is supposed to provide the precise timestamp. If a kms driver doesn't implement the entry point or if the call fails, a simple do_gettimeofday() timestamp is returned as crude approximation of the true vblank time. A new drm module parameter drm.timestamp_precision_usec allows to disable high precision timestamps (if set to zero) or to specify the maximum acceptable error in the timestamps in microseconds. Kms drivers could implement their get_vblank_timestamp() function in a gpu specific way, as long as returned timestamps conform to OML_sync_control, e.g., by use of gpu specific hardware timestamps. Optionally, kms drivers can simply wrap and use the new utility function drm_calc_vbltimestamp_from_scanoutpos(). This function calls a new optional kms driver function dev->driver->get_scanout_position() which returns the current horizontal and vertical video scanout position of the crtc. The scanout position together with the drm_display_timing of the current video mode is used to calculate elapsed time relative to start of active scanout for the current video frame. This elapsed time is subtracted from the current do_gettimeofday() time to get the timestamp corresponding to start of video scanout. Currently non-interlaced, non-doublescan video modes, with or without panel scaling are handled correctly. Interlaced/ doublescan modes are tbd in a future patch. 3. Filtering of redundant vblank irq's and removal of some race-conditions in the vblank irq enable/disable path: Some gpu's (e.g., Radeon R500/R600) send spurious vblank irq's outside the vblank if vblank irq's get reenabled. These get detected by use of the vblank timestamps and filtered out to avoid miscounting of vblanks. Some race-conditions between the vblank irq enable/disable functions, the vblank irq handler and the gpu itself (updating its hardware vblank counter in the "wrong" moment) are fixed inside vblank_disable_and_save() and drm_update_vblank_count() by use of the vblank timestamps and a new spinlock dev->vblank_time_lock. The time until vblank irq disable is now configurable via a new drm module parameter drm.vblankoffdelay to allow experimentation with timeouts that are much shorter than the current 5 seconds and should allow longer vblank off periods for better power savings. Followup patches will use these new functions to implement precise timestamping for the intel and radeon kms drivers. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-23 02:20:23 +00:00
/* Constants needed for precise vblank and swap timestamping. */
s64 framedur_ns, linedur_ns, pixeldur_ns;
/* if you are using the helper */
void *helper_private;
struct drm_object_properties properties;
};
/**
* drm_connector_funcs - control connectors on a given device
* @dpms: set power state (see drm_crtc_funcs above)
* @save: save connector state
* @restore: restore connector state
* @reset: reset connector after state has been invalidated (e.g. resume)
* @detect: is this connector active?
* @fill_modes: fill mode list for this connector
* @set_property: property for this connector may need an update
* @destroy: make object go away
* @force: notify the driver that the connector is forced on
*
* Each CRTC may have one or more connectors attached to it. The functions
* below allow the core DRM code to control connectors, enumerate available modes,
* etc.
*/
struct drm_connector_funcs {
void (*dpms)(struct drm_connector *connector, int mode);
void (*save)(struct drm_connector *connector);
void (*restore)(struct drm_connector *connector);
void (*reset)(struct drm_connector *connector);
/* Check to see if anything is attached to the connector.
* @force is set to false whilst polling, true when checking the
* connector due to user request. @force can be used by the driver
* to avoid expensive, destructive operations during automated
* probing.
*/
enum drm_connector_status (*detect)(struct drm_connector *connector,
bool force);
drm: initial KMS config fixes When mode setting is first initialized, the driver will call into drm_helper_initial_config() to set up an initial output and framebuffer configuration. This routine is responsible for probing the available connectors, encoders, and crtcs, looking for modes and putting together something reasonable (where reasonable is defined as "allows kernel messages to be visible on as many displays as possible"). However, the code was a bit too aggressive in setting default modes when none were found on a given connector. Even if some connectors had modes, any connectors found lacking modes would have the default 800x600 mode added to their mode list, which in some cases could cause problems later down the line. In my case, the LVDS was perfectly available, but the initial config code added 800x600 modes to both of the detected but unavailable HDMI connectors (which are on my non-existent docking station). This ended up preventing later code from setting a mode on my LVDS, which is bad. This patch fixes that behavior by making the initial config code walk through the connectors first, counting the available modes, before it decides to add any default modes to a possibly connected output. It also fixes the logic in drm_target_preferred() that was causing zeroed out modes to be set as the preferred mode for a given connector, even if no modes were available. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-12 20:05:32 +00:00
int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
int (*set_property)(struct drm_connector *connector, struct drm_property *property,
uint64_t val);
void (*destroy)(struct drm_connector *connector);
void (*force)(struct drm_connector *connector);
};
/**
* drm_encoder_funcs - encoder controls
* @reset: reset state (e.g. at init or resume time)
* @destroy: cleanup and free associated data
*
* Encoders sit between CRTCs and connectors.
*/
struct drm_encoder_funcs {
void (*reset)(struct drm_encoder *encoder);
void (*destroy)(struct drm_encoder *encoder);
};
#define DRM_CONNECTOR_MAX_ENCODER 3
/**
* drm_encoder - central DRM encoder structure
* @dev: parent DRM device
* @head: list management
* @base: base KMS object
* @encoder_type: one of the %DRM_MODE_ENCODER_<foo> types in drm_mode.h
* @possible_crtcs: bitmask of potential CRTC bindings
* @possible_clones: bitmask of potential sibling encoders for cloning
* @crtc: currently bound CRTC
* @bridge: bridge associated to the encoder
* @funcs: control functions
* @helper_private: mid-layer private data
*
* CRTCs drive pixels to encoders, which convert them into signals
* appropriate for a given connector or set of connectors.
*/
struct drm_encoder {
struct drm_device *dev;
struct list_head head;
struct drm_mode_object base;
int encoder_type;
uint32_t possible_crtcs;
uint32_t possible_clones;
struct drm_crtc *crtc;
struct drm_bridge *bridge;
const struct drm_encoder_funcs *funcs;
void *helper_private;
};
enum drm_connector_force {
DRM_FORCE_UNSPECIFIED,
DRM_FORCE_OFF,
DRM_FORCE_ON, /* force on analog part normally */
DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
};
/* should we poll this connector for connects and disconnects */
/* hot plug detectable */
#define DRM_CONNECTOR_POLL_HPD (1 << 0)
/* poll for connections */
#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
/* can cleanly poll for disconnections without flickering the screen */
/* DACs should rarely do this without a lot of testing */
#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 06:23:20 +00:00
#define MAX_ELD_BYTES 128
/**
* drm_connector - central DRM connector control structure
* @dev: parent DRM device
* @kdev: kernel device for sysfs attributes
* @attr: sysfs attributes
* @head: list management
* @base: base KMS object
* @connector_type: one of the %DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
* @connector_type_id: index into connector type enum
* @interlace_allowed: can this connector handle interlaced modes?
* @doublescan_allowed: can this connector handle doublescan?
* @modes: modes available on this connector (from fill_modes() + user)
* @status: one of the drm_connector_status enums (connected, not, or unknown)
* @probed_modes: list of modes derived directly from the display
* @display_info: information about attached display (e.g. from EDID)
* @funcs: connector control functions
* @edid_blob_ptr: DRM property containing EDID if present
* @properties: property tracking for this connector
* @polled: a %DRM_CONNECTOR_POLL_<foo> value for core driven polling
* @dpms: current dpms state
* @helper_private: mid-layer private data
* @force: a %DRM_FORCE_<foo> state for forced mode sets
* @encoder_ids: valid encoders for this connector
* @encoder: encoder driving this connector, if any
* @eld: EDID-like data, if present
* @dvi_dual: dual link DVI, if found
* @max_tmds_clock: max clock rate, if found
* @latency_present: AV delay info from ELD, if found
* @video_latency: video latency info from ELD, if found
* @audio_latency: audio latency info from ELD, if found
* @null_edid_counter: track sinks that give us all zeros for the EDID
*
* Each connector may be connected to one or more CRTCs, or may be clonable by
* another connector if they can share a CRTC. Each connector also has a specific
* position in the broader display (referred to as a 'screen' though it could
* span multiple monitors).
*/
struct drm_connector {
struct drm_device *dev;
struct device *kdev;
struct device_attribute *attr;
struct list_head head;
struct drm_mode_object base;
int connector_type;
int connector_type_id;
bool interlace_allowed;
bool doublescan_allowed;
bool stereo_allowed;
struct list_head modes; /* list of modes on this connector */
enum drm_connector_status status;
/* these are modes added by probing with DDC or the BIOS */
struct list_head probed_modes;
struct drm_display_info display_info;
const struct drm_connector_funcs *funcs;
struct drm_property_blob *edid_blob_ptr;
struct drm_object_properties properties;
uint8_t polled; /* DRM_CONNECTOR_POLL_* */
/* requested DPMS state */
int dpms;
void *helper_private;
/* forced on connector */
enum drm_connector_force force;
uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
struct drm_encoder *encoder; /* currently active encoder */
drm: support routines for HDMI/DP ELD ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio capabilities of the plugged monitor. This adds drm_edid_to_eld() for converting EDID to ELD. The converted ELD will be saved in a new drm_connector.eld[128] data field. This is necessary because the graphics driver will need to fixup some of the data fields (eg. HDMI/DP connection type, AV sync delay) before writing to the hardware ELD buffer. drm_av_sync_delay() will help the graphics drivers dynamically compute the AV sync delay for fixing-up the ELD. ELD selection policy: it's possible for one encoder to be associated with multiple connectors (ie. monitors), in which case the first found ELD will be returned by drm_select_eld(). This policy may not be suitable for all users, but let's start it simple first. The impact of ELD selection policy: assume there are two monitors, one supports stereo playback and the other has 8-channel output; cloned display mode is used, so that the two monitors are associated with the same internal encoder. If only the stereo playback capability is reported, the user won't be able to start 8-channel playback; if the 8-channel ELD is reported, then user space applications may send 8-channel samples down, however the user may actually be listening to the 2-channel monitor and not connecting speakers to the 8-channel monitor. According to James, many TVs will either refuse the display anything or pop-up an OSD warning whenever they receive hdmi audio which they cannot handle. Eventually we will require configurability and/or per-monitor audio control even when the video is cloned. CC: Zhao Yakui <yakui.zhao@intel.com> CC: Wang Zhenyu <zhenyu.z.wang@intel.com> CC: Jeremy Bush <contractfrombelow@gmail.com> CC: Christopher White <c.white@pulseforce.com> CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com> CC: Paul Menzel <paulepanter@users.sourceforge.net> CC: James Cloos <cloos@jhcloos.com> CC: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2011-09-05 06:23:20 +00:00
/* EDID bits */
uint8_t eld[MAX_ELD_BYTES];
bool dvi_dual;
int max_tmds_clock; /* in MHz */
bool latency_present[2];
int video_latency[2]; /* [0]: progressive, [1]: interlaced */
int audio_latency[2];
int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
unsigned bad_edid_counter;
};
/**
* drm_plane_funcs - driver plane control functions
* @update_plane: update the plane configuration
* @disable_plane: shut down the plane
* @destroy: clean up plane resources
* @set_property: called when a property is changed
*/
struct drm_plane_funcs {
int (*update_plane)(struct drm_plane *plane,
struct drm_crtc *crtc, struct drm_framebuffer *fb,
int crtc_x, int crtc_y,
unsigned int crtc_w, unsigned int crtc_h,
uint32_t src_x, uint32_t src_y,
uint32_t src_w, uint32_t src_h);
int (*disable_plane)(struct drm_plane *plane);
void (*destroy)(struct drm_plane *plane);
int (*set_property)(struct drm_plane *plane,
struct drm_property *property, uint64_t val);
};
/**
* drm_plane - central DRM plane control structure
* @dev: DRM device this plane belongs to
* @head: for list management
* @base: base mode object
* @possible_crtcs: pipes this plane can be bound to
* @format_types: array of formats supported by this plane
* @format_count: number of formats supported
* @crtc: currently bound CRTC
* @fb: currently bound fb
* @funcs: helper functions
* @properties: property tracking for this plane
*/
struct drm_plane {
struct drm_device *dev;
struct list_head head;
struct drm_mode_object base;
uint32_t possible_crtcs;
uint32_t *format_types;
uint32_t format_count;
struct drm_crtc *crtc;
struct drm_framebuffer *fb;
const struct drm_plane_funcs *funcs;
struct drm_object_properties properties;
};
/**
* drm_bridge_funcs - drm_bridge control functions
* @mode_fixup: Try to fixup (or reject entirely) proposed mode for this bridge
* @disable: Called right before encoder prepare, disables the bridge
* @post_disable: Called right after encoder prepare, for lockstepped disable
* @mode_set: Set this mode to the bridge
* @pre_enable: Called right before encoder commit, for lockstepped commit
* @enable: Called right after encoder commit, enables the bridge
* @destroy: make object go away
*/
struct drm_bridge_funcs {
bool (*mode_fixup)(struct drm_bridge *bridge,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void (*disable)(struct drm_bridge *bridge);
void (*post_disable)(struct drm_bridge *bridge);
void (*mode_set)(struct drm_bridge *bridge,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode);
void (*pre_enable)(struct drm_bridge *bridge);
void (*enable)(struct drm_bridge *bridge);
void (*destroy)(struct drm_bridge *bridge);
};
/**
* drm_bridge - central DRM bridge control structure
* @dev: DRM device this bridge belongs to
* @head: list management
* @base: base mode object
* @funcs: control functions
* @driver_private: pointer to the bridge driver's internal context
*/
struct drm_bridge {
struct drm_device *dev;
struct list_head head;
struct drm_mode_object base;
const struct drm_bridge_funcs *funcs;
void *driver_private;
};
/**
* drm_mode_set - new values for a CRTC config change
* @head: list management
* @fb: framebuffer to use for new config
* @crtc: CRTC whose configuration we're about to change
* @mode: mode timings to use
* @x: position of this CRTC relative to @fb
* @y: position of this CRTC relative to @fb
* @connectors: array of connectors to drive with this CRTC if possible
* @num_connectors: size of @connectors array
*
* Represents a single crtc the connectors that it drives with what mode
* and from which framebuffer it scans out from.
*
* This is used to set modes.
*/
struct drm_mode_set {
struct drm_framebuffer *fb;
struct drm_crtc *crtc;
struct drm_display_mode *mode;
uint32_t x;
uint32_t y;
struct drm_connector **connectors;
size_t num_connectors;
};
/**
* struct drm_mode_config_funcs - basic driver provided mode setting functions
* @fb_create: create a new framebuffer object
* @output_poll_changed: function to handle output configuration changes
*
* Some global (i.e. not per-CRTC, connector, etc) mode setting functions that
* involve drivers.
*/
struct drm_mode_config_funcs {
struct drm_framebuffer *(*fb_create)(struct drm_device *dev,
struct drm_file *file_priv,
struct drm_mode_fb_cmd2 *mode_cmd);
void (*output_poll_changed)(struct drm_device *dev);
};
/**
* drm_mode_group - group of mode setting resources for potential sub-grouping
* @num_crtcs: CRTC count
* @num_encoders: encoder count
* @num_connectors: connector count
* @id_list: list of KMS object IDs in this group
*
* Currently this simply tracks the global mode setting state. But in the
* future it could allow groups of objects to be set aside into independent
* control groups for use by different user level processes (e.g. two X servers
* running simultaneously on different heads, each with their own mode
* configuration and freedom of mode setting).
*/
struct drm_mode_group {
uint32_t num_crtcs;
uint32_t num_encoders;
uint32_t num_connectors;
uint32_t num_bridges;
/* list of object IDs for this group */
uint32_t *id_list;
};
/**
* drm_mode_config - Mode configuration control structure
* @mutex: mutex protecting KMS related lists and structures
* @idr_mutex: mutex for KMS ID allocation and management
* @crtc_idr: main KMS ID tracking object
* @num_fb: number of fbs available
* @fb_list: list of framebuffers available
* @num_connector: number of connectors on this device
* @connector_list: list of connector objects
* @num_bridge: number of bridges on this device
* @bridge_list: list of bridge objects
* @num_encoder: number of encoders on this device
* @encoder_list: list of encoder objects
* @num_crtc: number of CRTCs on this device
* @crtc_list: list of CRTC objects
* @min_width: minimum pixel width on this device
* @min_height: minimum pixel height on this device
* @max_width: maximum pixel width on this device
* @max_height: maximum pixel height on this device
* @funcs: core driver provided mode setting functions
* @fb_base: base address of the framebuffer
* @poll_enabled: track polling status for this device
* @output_poll_work: delayed work for polling in process context
* @*_property: core property tracking
*
* Core mode resource tracking structure. All CRTC, encoders, and connectors
* enumerated by the driver are added here, as are global properties. Some
* global restrictions are also here, e.g. dimension restrictions.
*/
struct drm_mode_config {
struct mutex mutex; /* protects configuration (mode lists etc.) */
struct mutex idr_mutex; /* for IDR management */
struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */
/* this is limited to one for now */
drm: revamp locking around fb creation/destruction Well, at least step 1. The goal here is that framebuffer objects can survive outside of the mode_config lock, with just a reference held as protection. The first step to get there is to introduce a special fb_lock which protects fb lookup, creation and destruction, to make them appear atomic. This new fb_lock can nest within the mode_config lock. But the idea is (once the reference counting part is completed) that we only quickly take that fb_lock to lookup a framebuffer and grab a reference, without any other locks involved. vmwgfx is the only driver which does framebuffer lookups itself, also wrap those calls to drm_mode_object_find with the new lock. Also protect the fb_list walking in i915 and omapdrm with the new lock. As a slight complication there's also the list of user-created fbs attached to the file private. The problem now is that at fclose() time we need to walk that list, eventually do a modeset call to remove the fb from active usage (and are required to be able to take the mode_config lock), but in the end we need to grab the new fb_lock to remove the fb from the list. The easiest solution is to add another mutex to protect this per-file list. Currently that new fbs_lock nests within the modeset locks and so appears redudant. But later patches will switch around this sequence so that taking the modeset locks in the fb destruction path is optional in the fastpath. Ultimately the goal is that addfb and rmfb do not require the mode_config lock, since otherwise they have the potential to introduce stalls in the pageflip sequence of a compositor (if the compositor e.g. switches to a fullscreen client or if it enables a plane). But that requires a few more steps and hoops to jump through. Note that framebuffer creation/destruction is now double-protected - once by the fb_lock and in parts by the idr_lock. The later would be unnecessariy if framebuffers would have their own idr allocator. But that's material for another patch (series). v2: Properly initialize the fb->filp_head list in _init, otherwise the newly added WARN to check whether the fb isn't on a fpriv list any more will fail for driver-private objects. v3: Fixup two error-case unlock bugs spotted by Richard Wilbur. Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-10 20:19:18 +00:00
/**
* fb_lock - mutex to protect fb state
*
* Besides the global fb list his also protects the fbs list in the
* file_priv
*/
struct mutex fb_lock;
int num_fb;
struct list_head fb_list;
drm: revamp locking around fb creation/destruction Well, at least step 1. The goal here is that framebuffer objects can survive outside of the mode_config lock, with just a reference held as protection. The first step to get there is to introduce a special fb_lock which protects fb lookup, creation and destruction, to make them appear atomic. This new fb_lock can nest within the mode_config lock. But the idea is (once the reference counting part is completed) that we only quickly take that fb_lock to lookup a framebuffer and grab a reference, without any other locks involved. vmwgfx is the only driver which does framebuffer lookups itself, also wrap those calls to drm_mode_object_find with the new lock. Also protect the fb_list walking in i915 and omapdrm with the new lock. As a slight complication there's also the list of user-created fbs attached to the file private. The problem now is that at fclose() time we need to walk that list, eventually do a modeset call to remove the fb from active usage (and are required to be able to take the mode_config lock), but in the end we need to grab the new fb_lock to remove the fb from the list. The easiest solution is to add another mutex to protect this per-file list. Currently that new fbs_lock nests within the modeset locks and so appears redudant. But later patches will switch around this sequence so that taking the modeset locks in the fb destruction path is optional in the fastpath. Ultimately the goal is that addfb and rmfb do not require the mode_config lock, since otherwise they have the potential to introduce stalls in the pageflip sequence of a compositor (if the compositor e.g. switches to a fullscreen client or if it enables a plane). But that requires a few more steps and hoops to jump through. Note that framebuffer creation/destruction is now double-protected - once by the fb_lock and in parts by the idr_lock. The later would be unnecessariy if framebuffers would have their own idr allocator. But that's material for another patch (series). v2: Properly initialize the fb->filp_head list in _init, otherwise the newly added WARN to check whether the fb isn't on a fpriv list any more will fail for driver-private objects. v3: Fixup two error-case unlock bugs spotted by Richard Wilbur. Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-10 20:19:18 +00:00
int num_connector;
struct list_head connector_list;
int num_bridge;
struct list_head bridge_list;
int num_encoder;
struct list_head encoder_list;
int num_plane;
struct list_head plane_list;
int num_crtc;
struct list_head crtc_list;
struct list_head property_list;
int min_width, min_height;
int max_width, max_height;
const struct drm_mode_config_funcs *funcs;
resource_size_t fb_base;
/* output poll support */
bool poll_enabled;
drm: don't start the poll engine in probe_single_connector Actually there's a reason this stuff is there, and it's called commit e58f637bb96d5a0ae0919b9998b891d1ba7e47c9 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Aug 20 09:13:36 2010 +0100 drm/kms: Add a module parameter to disable polling The idea has been that users can enable/disable polling at runtime. So the quick hack has been to just re-enable the output polling if xrandr asks for the latest state of the connectors. The problem with that hack is that when we force connectors to another state than what would be detected, we nicely ping-pong: - Userspace calls probe, gets the forced state, but polling starts again. - Polling notices that the state is actually different, wakes up userspace. - Repeat. As that commit already explains, the right fix would be to make the locking more fine-grained, so that hotplug detection on one output does not interfere with cursor updates on another crtc. But that is way too much work. So let's just safe this gross hack by caching the last-seen state of drm_kms_helper_poll for that driver, and only fire up the poll engine again if it changed from off to on. v2: Fixup the edge detection of drm_kms_helper_poll. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=49907 Tested-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-23 18:23:36 +00:00
bool poll_running;
struct delayed_work output_poll_work;
/* pointers to standard properties */
struct list_head property_blob_list;
struct drm_property *edid_property;
struct drm_property *dpms_property;
/* DVI-I properties */
struct drm_property *dvi_i_subconnector_property;
struct drm_property *dvi_i_select_subconnector_property;
/* TV properties */
struct drm_property *tv_subconnector_property;
struct drm_property *tv_select_subconnector_property;
struct drm_property *tv_mode_property;
struct drm_property *tv_left_margin_property;
struct drm_property *tv_right_margin_property;
struct drm_property *tv_top_margin_property;
struct drm_property *tv_bottom_margin_property;
struct drm_property *tv_brightness_property;
struct drm_property *tv_contrast_property;
struct drm_property *tv_flicker_reduction_property;
struct drm_property *tv_overscan_property;
struct drm_property *tv_saturation_property;
struct drm_property *tv_hue_property;
/* Optional properties */
struct drm_property *scaling_mode_property;
struct drm_property *dirty_info_property;
/* dumb ioctl parameters */
uint32_t preferred_depth, prefer_shadow;
/* whether async page flip is supported or not */
bool async_page_flip;
};
#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
#define obj_to_connector(x) container_of(x, struct drm_connector, base)
#define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
#define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
#define obj_to_fb(x) container_of(x, struct drm_framebuffer, base)
#define obj_to_property(x) container_of(x, struct drm_property, base)
#define obj_to_blob(x) container_of(x, struct drm_property_blob, base)
#define obj_to_plane(x) container_of(x, struct drm_plane, base)
struct drm_prop_enum_list {
int type;
char *name;
};
extern void drm_modeset_lock_all(struct drm_device *dev);
extern void drm_modeset_unlock_all(struct drm_device *dev);
extern void drm_warn_on_modeset_not_all_locked(struct drm_device *dev);
extern int drm_crtc_init(struct drm_device *dev,
struct drm_crtc *crtc,
const struct drm_crtc_funcs *funcs);
extern void drm_crtc_cleanup(struct drm_crtc *crtc);
extern unsigned int drm_crtc_index(struct drm_crtc *crtc);
/**
* drm_crtc_mask - find the mask of a registered CRTC
* @crtc: CRTC to find mask for
*
* Given a registered CRTC, return the mask bit of that CRTC for an
* encoder's possible_crtcs field.
*/
static inline uint32_t drm_crtc_mask(struct drm_crtc *crtc)
{
return 1 << drm_crtc_index(crtc);
}
extern void drm_connector_ida_init(void);
extern void drm_connector_ida_destroy(void);
extern int drm_connector_init(struct drm_device *dev,
struct drm_connector *connector,
const struct drm_connector_funcs *funcs,
int connector_type);
extern void drm_connector_cleanup(struct drm_connector *connector);
/* helper to unplug all connectors from sysfs for device */
extern void drm_connector_unplug_all(struct drm_device *dev);
extern int drm_bridge_init(struct drm_device *dev, struct drm_bridge *bridge,
const struct drm_bridge_funcs *funcs);
extern void drm_bridge_cleanup(struct drm_bridge *bridge);
extern int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
const struct drm_encoder_funcs *funcs,
int encoder_type);
extern int drm_plane_init(struct drm_device *dev,
struct drm_plane *plane,
unsigned long possible_crtcs,
const struct drm_plane_funcs *funcs,
const uint32_t *formats, uint32_t format_count,
bool priv);
extern void drm_plane_cleanup(struct drm_plane *plane);
extern void drm_plane_force_disable(struct drm_plane *plane);
extern void drm_encoder_cleanup(struct drm_encoder *encoder);
extern const char *drm_get_connector_name(const struct drm_connector *connector);
extern const char *drm_get_connector_status_name(enum drm_connector_status status);
extern const char *drm_get_dpms_name(int val);
extern const char *drm_get_dvi_i_subconnector_name(int val);
extern const char *drm_get_dvi_i_select_name(int val);
extern const char *drm_get_tv_subconnector_name(int val);
extern const char *drm_get_tv_select_name(int val);
extern void drm_fb_release(struct drm_file *file_priv);
extern int drm_mode_group_init_legacy_group(struct drm_device *dev, struct drm_mode_group *group);
extern bool drm_probe_ddc(struct i2c_adapter *adapter);
extern struct edid *drm_get_edid(struct drm_connector *connector,
struct i2c_adapter *adapter);
extern struct edid *drm_edid_duplicate(const struct edid *edid);
extern int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid);
extern void drm_mode_probed_add(struct drm_connector *connector, struct drm_display_mode *mode);
extern void drm_mode_copy(struct drm_display_mode *dst, const struct drm_display_mode *src);
extern struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
const struct drm_display_mode *mode);
extern void drm_mode_debug_printmodeline(const struct drm_display_mode *mode);
extern void drm_mode_config_init(struct drm_device *dev);
extern void drm_mode_config_reset(struct drm_device *dev);
extern void drm_mode_config_cleanup(struct drm_device *dev);
extern void drm_mode_set_name(struct drm_display_mode *mode);
extern bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2);
extern bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2);
extern int drm_mode_width(const struct drm_display_mode *mode);
extern int drm_mode_height(const struct drm_display_mode *mode);
/* for us by fb module */
extern struct drm_display_mode *drm_mode_create(struct drm_device *dev);
extern void drm_mode_destroy(struct drm_device *dev, struct drm_display_mode *mode);
extern void drm_mode_validate_size(struct drm_device *dev,
struct list_head *mode_list,
int maxX, int maxY, int maxPitch);
extern void drm_mode_prune_invalid(struct drm_device *dev,
struct list_head *mode_list, bool verbose);
extern void drm_mode_sort(struct list_head *mode_list);
extern int drm_mode_hsync(const struct drm_display_mode *mode);
extern int drm_mode_vrefresh(const struct drm_display_mode *mode);
extern void drm_mode_set_crtcinfo(struct drm_display_mode *p,
int adjust_flags);
extern void drm_mode_connector_list_update(struct drm_connector *connector);
extern int drm_mode_connector_update_edid_property(struct drm_connector *connector,
struct edid *edid);
extern int drm_object_property_set_value(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t val);
extern int drm_object_property_get_value(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t *value);
extern int drm_framebuffer_init(struct drm_device *dev,
struct drm_framebuffer *fb,
const struct drm_framebuffer_funcs *funcs);
extern struct drm_framebuffer *drm_framebuffer_lookup(struct drm_device *dev,
uint32_t id);
extern void drm_framebuffer_unreference(struct drm_framebuffer *fb);
extern void drm_framebuffer_reference(struct drm_framebuffer *fb);
extern void drm_framebuffer_remove(struct drm_framebuffer *fb);
extern void drm_framebuffer_cleanup(struct drm_framebuffer *fb);
drm: revamp framebuffer cleanup interfaces We have two classes of framebuffer - Created by the driver (atm only for fbdev), and the driver holds onto the last reference count until destruction. - Created by userspace and associated with a given fd. These framebuffers will be reaped when their assoiciated fb is closed. Now these two cases are set up differently, the framebuffers are on different lists and hence destruction needs to clean up different things. Also, for userspace framebuffers we remove them from any current usage, whereas for internal framebuffers it is assumed that the driver has done this already. Long story short, we need two different ways to cleanup such drivers. Three functions are involved in total: - drm_framebuffer_remove: Convenience function which removes the fb from all active usage and then drops the passed-in reference. - drm_framebuffer_unregister_private: Will remove driver-private framebuffers from relevant lists and drop the corresponding references. Should be called for driver-private framebuffers before dropping the last reference (or like for a lot of the drivers where the fbdev is embedded someplace else, before doing the cleanup manually). - drm_framebuffer_cleanup: Final cleanup for both classes of fbs, should be called by the driver's ->destroy callback once the last reference is gone. This patch just rolls out the new interfaces and updates all drivers (by adding calls to drm_framebuffer_unregister_private at all the right places)- no functional changes yet. Follow-on patches will move drm core code around and update the lifetime management for framebuffers, so that we are no longer required to keep framebuffers alive by locking mode_config.mutex. I've also updated the kerneldoc already. vmwgfx seems to again be a bit special, at least I haven't figured out how the fbdev support in that driver works. It smells like it's external though. v2: The i915 driver creates another private framebuffer in the load-detect code. Adjust its cleanup code, too. Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-10 19:42:17 +00:00
extern void drm_framebuffer_unregister_private(struct drm_framebuffer *fb);
extern void drm_object_attach_property(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t init_val);
extern struct drm_property *drm_property_create(struct drm_device *dev, int flags,
const char *name, int num_values);
extern struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags,
const char *name,
const struct drm_prop_enum_list *props,
int num_values);
struct drm_property *drm_property_create_bitmask(struct drm_device *dev,
int flags, const char *name,
const struct drm_prop_enum_list *props,
int num_values);
struct drm_property *drm_property_create_range(struct drm_device *dev, int flags,
const char *name,
uint64_t min, uint64_t max);
extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property);
extern int drm_property_add_enum(struct drm_property *property, int index,
uint64_t value, const char *name);
extern int drm_mode_create_dvi_i_properties(struct drm_device *dev);
extern int drm_mode_create_tv_properties(struct drm_device *dev, int num_formats,
char *formats[]);
extern int drm_mode_create_scaling_mode_property(struct drm_device *dev);
extern int drm_mode_create_dirty_info_property(struct drm_device *dev);
extern const char *drm_get_encoder_name(const struct drm_encoder *encoder);
extern int drm_mode_connector_attach_encoder(struct drm_connector *connector,
struct drm_encoder *encoder);
extern void drm_mode_connector_detach_encoder(struct drm_connector *connector,
struct drm_encoder *encoder);
extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
int gamma_size);
extern struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
uint32_t id, uint32_t type);
/* IOCTLs */
extern int drm_mode_getresources(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_getplane_res(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int drm_mode_getcrtc(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_getconnector(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_set_config_internal(struct drm_mode_set *set);
extern int drm_mode_setcrtc(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_getplane(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_setplane(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_cursor_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_cursor2_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_addfb(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_addfb2(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth);
extern int drm_mode_rmfb(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_getfb(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_dirtyfb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_getproperty_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_getblob_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_getencoder(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_gamma_get_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_gamma_set_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern u8 drm_match_cea_mode(const struct drm_display_mode *to_match);
extern bool drm_detect_hdmi_monitor(struct edid *edid);
extern bool drm_detect_monitor_audio(struct edid *edid);
extern bool drm_rgb_quant_range_selectable(struct edid *edid);
extern int drm_mode_page_flip_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
int hdisplay, int vdisplay, int vrefresh,
bool reduced, bool interlaced, bool margins);
extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
int hdisplay, int vdisplay, int vrefresh,
bool interlaced, int margins);
extern struct drm_display_mode *drm_gtf_mode_complex(struct drm_device *dev,
int hdisplay, int vdisplay, int vrefresh,
bool interlaced, int margins, int GTF_M,
int GTF_2C, int GTF_K, int GTF_2J);
extern int drm_add_modes_noedid(struct drm_connector *connector,
int hdisplay, int vdisplay);
extern void drm_set_preferred_mode(struct drm_connector *connector,
int hpref, int vpref);
extern int drm_edid_header_is_valid(const u8 *raw_edid);
extern bool drm_edid_block_valid(u8 *raw_edid, int block, bool print_bad_edid);
extern bool drm_edid_is_valid(struct edid *edid);
struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev,
int hsize, int vsize, int fresh,
bool rb);
extern int drm_mode_create_dumb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_mmap_dumb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_destroy_dumb_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
extern int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv);
extern void drm_fb_get_bpp_depth(uint32_t format, unsigned int *depth,
int *bpp);
extern int drm_format_num_planes(uint32_t format);
extern int drm_format_plane_cpp(uint32_t format, int plane);
extern int drm_format_horz_chroma_subsampling(uint32_t format);
extern int drm_format_vert_chroma_subsampling(uint32_t format);
extern const char *drm_get_format_name(uint32_t format);
/* Helpers */
static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev,
uint32_t id)
{
struct drm_mode_object *mo;
mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CRTC);
return mo ? obj_to_crtc(mo) : NULL;
}
static inline struct drm_encoder *drm_encoder_find(struct drm_device *dev,
uint32_t id)
{
struct drm_mode_object *mo;
mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_ENCODER);
return mo ? obj_to_encoder(mo) : NULL;
}
#endif /* __DRM_CRTC_H__ */