linux/net/mac80211/debugfs.c

618 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* mac80211 debugfs for wireless PHYs
*
* Copyright 2007 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright (C) 2018 - 2019 Intel Corporation
*/
#include <linux/debugfs.h>
#include <linux/rtnetlink.h>
#include <linux/vmalloc.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
#include "rate.h"
#include "debugfs.h"
#define DEBUGFS_FORMAT_BUFFER_SIZE 100
int mac80211_format_buffer(char __user *userbuf, size_t count,
loff_t *ppos, char *fmt, ...)
{
va_list args;
char buf[DEBUGFS_FORMAT_BUFFER_SIZE];
int res;
va_start(args, fmt);
res = vscnprintf(buf, sizeof(buf), fmt, args);
va_end(args);
return simple_read_from_buffer(userbuf, count, ppos, buf, res);
}
#define DEBUGFS_READONLY_FILE_FN(name, fmt, value...) \
static ssize_t name## _read(struct file *file, char __user *userbuf, \
size_t count, loff_t *ppos) \
{ \
struct ieee80211_local *local = file->private_data; \
\
return mac80211_format_buffer(userbuf, count, ppos, \
fmt "\n", ##value); \
}
#define DEBUGFS_READONLY_FILE_OPS(name) \
static const struct file_operations name## _ops = { \
.read = name## _read, \
.open = simple_open, \
.llseek = generic_file_llseek, \
};
#define DEBUGFS_READONLY_FILE(name, fmt, value...) \
DEBUGFS_READONLY_FILE_FN(name, fmt, value) \
DEBUGFS_READONLY_FILE_OPS(name)
#define DEBUGFS_ADD(name) \
debugfs_create_file(#name, 0400, phyd, local, &name## _ops)
#define DEBUGFS_ADD_MODE(name, mode) \
debugfs_create_file(#name, mode, phyd, local, &name## _ops);
DEBUGFS_READONLY_FILE(hw_conf, "%x",
local->hw.conf.flags);
DEBUGFS_READONLY_FILE(user_power, "%d",
local->user_power_level);
DEBUGFS_READONLY_FILE(power, "%d",
local->hw.conf.power_level);
DEBUGFS_READONLY_FILE(total_ps_buffered, "%d",
local->total_ps_buffered);
DEBUGFS_READONLY_FILE(wep_iv, "%#08x",
local->wep_iv & 0xffffff);
DEBUGFS_READONLY_FILE(rate_ctrl_alg, "%s",
local->rate_ctrl ? local->rate_ctrl->ops->name : "hw/driver");
static ssize_t aqm_read(struct file *file,
char __user *user_buf,
size_t count,
loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
struct fq *fq = &local->fq;
char buf[200];
int len = 0;
spin_lock_bh(&local->fq.lock);
rcu_read_lock();
len = scnprintf(buf, sizeof(buf),
"access name value\n"
"R fq_flows_cnt %u\n"
"R fq_backlog %u\n"
"R fq_overlimit %u\n"
"R fq_overmemory %u\n"
"R fq_collisions %u\n"
"R fq_memory_usage %u\n"
"RW fq_memory_limit %u\n"
"RW fq_limit %u\n"
"RW fq_quantum %u\n",
fq->flows_cnt,
fq->backlog,
fq->overmemory,
fq->overlimit,
fq->collisions,
fq->memory_usage,
fq->memory_limit,
fq->limit,
fq->quantum);
rcu_read_unlock();
spin_unlock_bh(&local->fq.lock);
return simple_read_from_buffer(user_buf, count, ppos,
buf, len);
}
static ssize_t aqm_write(struct file *file,
const char __user *user_buf,
size_t count,
loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
char buf[100];
if (count >= sizeof(buf))
return -EINVAL;
if (copy_from_user(buf, user_buf, count))
return -EFAULT;
if (count && buf[count - 1] == '\n')
buf[count - 1] = '\0';
else
buf[count] = '\0';
if (sscanf(buf, "fq_limit %u", &local->fq.limit) == 1)
return count;
else if (sscanf(buf, "fq_memory_limit %u", &local->fq.memory_limit) == 1)
return count;
else if (sscanf(buf, "fq_quantum %u", &local->fq.quantum) == 1)
return count;
return -EINVAL;
}
static const struct file_operations aqm_ops = {
.write = aqm_write,
.read = aqm_read,
.open = simple_open,
.llseek = default_llseek,
};
static ssize_t airtime_flags_read(struct file *file,
char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
char buf[128] = {}, *pos, *end;
pos = buf;
end = pos + sizeof(buf) - 1;
if (local->airtime_flags & AIRTIME_USE_TX)
pos += scnprintf(pos, end - pos, "AIRTIME_TX\t(%lx)\n",
AIRTIME_USE_TX);
if (local->airtime_flags & AIRTIME_USE_RX)
pos += scnprintf(pos, end - pos, "AIRTIME_RX\t(%lx)\n",
AIRTIME_USE_RX);
return simple_read_from_buffer(user_buf, count, ppos, buf,
strlen(buf));
}
static ssize_t airtime_flags_write(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
char buf[16];
if (count >= sizeof(buf))
return -EINVAL;
if (copy_from_user(buf, user_buf, count))
return -EFAULT;
if (count && buf[count - 1] == '\n')
buf[count - 1] = '\0';
else
buf[count] = '\0';
if (kstrtou16(buf, 0, &local->airtime_flags))
return -EINVAL;
return count;
}
static const struct file_operations airtime_flags_ops = {
.write = airtime_flags_write,
.read = airtime_flags_read,
.open = simple_open,
.llseek = default_llseek,
};
mac80211: Implement Airtime-based Queue Limit (AQL) In order for the Fq_CoDel algorithm integrated in mac80211 layer to operate effectively to control excessive queueing latency, the CoDel algorithm requires an accurate measure of how long packets stays in the queue, AKA sojourn time. The sojourn time measured at the mac80211 layer doesn't include queueing latency in the lower layer (firmware/hardware) and CoDel expects lower layer to have a short queue. However, most 802.11ac chipsets offload tasks such TX aggregation to firmware or hardware, thus have a deep lower layer queue. Without a mechanism to control the lower layer queue size, packets only stay in mac80211 layer transiently before being sent to firmware queue. As a result, the sojourn time measured by CoDel in the mac80211 layer is almost always lower than the CoDel latency target, hence CoDel does little to control the latency, even when the lower layer queue causes excessive latency. The Byte Queue Limits (BQL) mechanism is commonly used to address the similar issue with wired network interface. However, this method cannot be applied directly to the wireless network interface. "Bytes" is not a suitable measure of queue depth in the wireless network, as the data rate can vary dramatically from station to station in the same network, from a few Mbps to over Gbps. This patch implements an Airtime-based Queue Limit (AQL) to make CoDel work effectively with wireless drivers that utilized firmware/hardware offloading. AQL allows each txq to release just enough packets to the lower layer to form 1-2 large aggregations to keep hardware fully utilized and retains the rest of the frames in mac80211 layer to be controlled by the CoDel algorithm. Signed-off-by: Kan Yan <kyan@google.com> [ Toke: Keep API to set pending airtime internal, fix nits in commit msg ] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191119060610.76681-4-kyan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-19 06:06:09 +00:00
static ssize_t aql_txq_limit_read(struct file *file,
char __user *user_buf,
size_t count,
loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
char buf[400];
int len = 0;
len = scnprintf(buf, sizeof(buf),
"AC AQL limit low AQL limit high\n"
"VO %u %u\n"
"VI %u %u\n"
"BE %u %u\n"
"BK %u %u\n",
local->aql_txq_limit_low[IEEE80211_AC_VO],
local->aql_txq_limit_high[IEEE80211_AC_VO],
local->aql_txq_limit_low[IEEE80211_AC_VI],
local->aql_txq_limit_high[IEEE80211_AC_VI],
local->aql_txq_limit_low[IEEE80211_AC_BE],
local->aql_txq_limit_high[IEEE80211_AC_BE],
local->aql_txq_limit_low[IEEE80211_AC_BK],
local->aql_txq_limit_high[IEEE80211_AC_BK]);
return simple_read_from_buffer(user_buf, count, ppos,
buf, len);
}
static ssize_t aql_txq_limit_write(struct file *file,
const char __user *user_buf,
size_t count,
loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
char buf[100];
u32 ac, q_limit_low, q_limit_high, q_limit_low_old, q_limit_high_old;
struct sta_info *sta;
if (count >= sizeof(buf))
mac80211: Implement Airtime-based Queue Limit (AQL) In order for the Fq_CoDel algorithm integrated in mac80211 layer to operate effectively to control excessive queueing latency, the CoDel algorithm requires an accurate measure of how long packets stays in the queue, AKA sojourn time. The sojourn time measured at the mac80211 layer doesn't include queueing latency in the lower layer (firmware/hardware) and CoDel expects lower layer to have a short queue. However, most 802.11ac chipsets offload tasks such TX aggregation to firmware or hardware, thus have a deep lower layer queue. Without a mechanism to control the lower layer queue size, packets only stay in mac80211 layer transiently before being sent to firmware queue. As a result, the sojourn time measured by CoDel in the mac80211 layer is almost always lower than the CoDel latency target, hence CoDel does little to control the latency, even when the lower layer queue causes excessive latency. The Byte Queue Limits (BQL) mechanism is commonly used to address the similar issue with wired network interface. However, this method cannot be applied directly to the wireless network interface. "Bytes" is not a suitable measure of queue depth in the wireless network, as the data rate can vary dramatically from station to station in the same network, from a few Mbps to over Gbps. This patch implements an Airtime-based Queue Limit (AQL) to make CoDel work effectively with wireless drivers that utilized firmware/hardware offloading. AQL allows each txq to release just enough packets to the lower layer to form 1-2 large aggregations to keep hardware fully utilized and retains the rest of the frames in mac80211 layer to be controlled by the CoDel algorithm. Signed-off-by: Kan Yan <kyan@google.com> [ Toke: Keep API to set pending airtime internal, fix nits in commit msg ] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191119060610.76681-4-kyan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-19 06:06:09 +00:00
return -EINVAL;
if (copy_from_user(buf, user_buf, count))
return -EFAULT;
if (count && buf[count - 1] == '\n')
buf[count - 1] = '\0';
else
buf[count] = '\0';
mac80211: Implement Airtime-based Queue Limit (AQL) In order for the Fq_CoDel algorithm integrated in mac80211 layer to operate effectively to control excessive queueing latency, the CoDel algorithm requires an accurate measure of how long packets stays in the queue, AKA sojourn time. The sojourn time measured at the mac80211 layer doesn't include queueing latency in the lower layer (firmware/hardware) and CoDel expects lower layer to have a short queue. However, most 802.11ac chipsets offload tasks such TX aggregation to firmware or hardware, thus have a deep lower layer queue. Without a mechanism to control the lower layer queue size, packets only stay in mac80211 layer transiently before being sent to firmware queue. As a result, the sojourn time measured by CoDel in the mac80211 layer is almost always lower than the CoDel latency target, hence CoDel does little to control the latency, even when the lower layer queue causes excessive latency. The Byte Queue Limits (BQL) mechanism is commonly used to address the similar issue with wired network interface. However, this method cannot be applied directly to the wireless network interface. "Bytes" is not a suitable measure of queue depth in the wireless network, as the data rate can vary dramatically from station to station in the same network, from a few Mbps to over Gbps. This patch implements an Airtime-based Queue Limit (AQL) to make CoDel work effectively with wireless drivers that utilized firmware/hardware offloading. AQL allows each txq to release just enough packets to the lower layer to form 1-2 large aggregations to keep hardware fully utilized and retains the rest of the frames in mac80211 layer to be controlled by the CoDel algorithm. Signed-off-by: Kan Yan <kyan@google.com> [ Toke: Keep API to set pending airtime internal, fix nits in commit msg ] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191119060610.76681-4-kyan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-19 06:06:09 +00:00
if (sscanf(buf, "%u %u %u", &ac, &q_limit_low, &q_limit_high) != 3)
return -EINVAL;
if (ac >= IEEE80211_NUM_ACS)
return -EINVAL;
q_limit_low_old = local->aql_txq_limit_low[ac];
q_limit_high_old = local->aql_txq_limit_high[ac];
local->aql_txq_limit_low[ac] = q_limit_low;
local->aql_txq_limit_high[ac] = q_limit_high;
mutex_lock(&local->sta_mtx);
list_for_each_entry(sta, &local->sta_list, list) {
/* If a sta has customized queue limits, keep it */
if (sta->airtime[ac].aql_limit_low == q_limit_low_old &&
sta->airtime[ac].aql_limit_high == q_limit_high_old) {
sta->airtime[ac].aql_limit_low = q_limit_low;
sta->airtime[ac].aql_limit_high = q_limit_high;
}
}
mutex_unlock(&local->sta_mtx);
return count;
}
static const struct file_operations aql_txq_limit_ops = {
.write = aql_txq_limit_write,
.read = aql_txq_limit_read,
.open = simple_open,
.llseek = default_llseek,
};
mac80211: debugfs option to force TX status frames At Technical University of Munich we use MAC 802.11 TX status frames to perform several measurements in MAC 802.11 setups. With ath based drivers this was possible until commit d94a461d7a7df6 ("ath9k: use ieee80211_tx_status_noskb where possible") as the driver ignored the IEEE80211_TX_CTL_REQ_TX_STATUS flag and always delivered tx_status frames. Since that commit, this behavior was changed and the driver now adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. Due to performance reasons, IEEE80211_TX_CTL_REQ_TX_STATUS is not set for data frames from interfaces in managed mode. Hence, frames that are sent from a managed mode interface do never deliver tx_status frames. This remains true even if a monitor mode interface (the measurement interface) is added to the same ieee80211 physical device. Thus, there is no possibility for receiving tx_status frames for frames sent on an interface in managed mode, if the driver adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. In order to force delivery of tx_status frames for research and debugging purposes, implement a debugfs option force_tx_status for ieee80211 physical devices. When this option is set for a physical device, IEEE80211_TX_CTL_REQ_TX_STATUS is enabled in all packets sent from that device. This option can be set via /sys/kernel/debug/ieee80211/<dev>/force_tx_status. The default is disabled. Co-developed-by: Charlie Groh <ga58taw@mytum.de> Signed-off-by: Charlie Groh <ga58taw@mytum.de> Signed-off-by: Julius Niedworok <julius.n@gmx.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-28 20:01:06 +00:00
static ssize_t force_tx_status_read(struct file *file,
char __user *user_buf,
size_t count,
loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
char buf[3];
int len = 0;
len = scnprintf(buf, sizeof(buf), "%d\n", (int)local->force_tx_status);
return simple_read_from_buffer(user_buf, count, ppos,
buf, len);
}
static ssize_t force_tx_status_write(struct file *file,
const char __user *user_buf,
size_t count,
loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
char buf[3];
if (count >= sizeof(buf))
mac80211: debugfs option to force TX status frames At Technical University of Munich we use MAC 802.11 TX status frames to perform several measurements in MAC 802.11 setups. With ath based drivers this was possible until commit d94a461d7a7df6 ("ath9k: use ieee80211_tx_status_noskb where possible") as the driver ignored the IEEE80211_TX_CTL_REQ_TX_STATUS flag and always delivered tx_status frames. Since that commit, this behavior was changed and the driver now adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. Due to performance reasons, IEEE80211_TX_CTL_REQ_TX_STATUS is not set for data frames from interfaces in managed mode. Hence, frames that are sent from a managed mode interface do never deliver tx_status frames. This remains true even if a monitor mode interface (the measurement interface) is added to the same ieee80211 physical device. Thus, there is no possibility for receiving tx_status frames for frames sent on an interface in managed mode, if the driver adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. In order to force delivery of tx_status frames for research and debugging purposes, implement a debugfs option force_tx_status for ieee80211 physical devices. When this option is set for a physical device, IEEE80211_TX_CTL_REQ_TX_STATUS is enabled in all packets sent from that device. This option can be set via /sys/kernel/debug/ieee80211/<dev>/force_tx_status. The default is disabled. Co-developed-by: Charlie Groh <ga58taw@mytum.de> Signed-off-by: Charlie Groh <ga58taw@mytum.de> Signed-off-by: Julius Niedworok <julius.n@gmx.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-28 20:01:06 +00:00
return -EINVAL;
if (copy_from_user(buf, user_buf, count))
return -EFAULT;
if (count && buf[count - 1] == '\n')
buf[count - 1] = '\0';
else
buf[count] = '\0';
mac80211: debugfs option to force TX status frames At Technical University of Munich we use MAC 802.11 TX status frames to perform several measurements in MAC 802.11 setups. With ath based drivers this was possible until commit d94a461d7a7df6 ("ath9k: use ieee80211_tx_status_noskb where possible") as the driver ignored the IEEE80211_TX_CTL_REQ_TX_STATUS flag and always delivered tx_status frames. Since that commit, this behavior was changed and the driver now adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. Due to performance reasons, IEEE80211_TX_CTL_REQ_TX_STATUS is not set for data frames from interfaces in managed mode. Hence, frames that are sent from a managed mode interface do never deliver tx_status frames. This remains true even if a monitor mode interface (the measurement interface) is added to the same ieee80211 physical device. Thus, there is no possibility for receiving tx_status frames for frames sent on an interface in managed mode, if the driver adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. In order to force delivery of tx_status frames for research and debugging purposes, implement a debugfs option force_tx_status for ieee80211 physical devices. When this option is set for a physical device, IEEE80211_TX_CTL_REQ_TX_STATUS is enabled in all packets sent from that device. This option can be set via /sys/kernel/debug/ieee80211/<dev>/force_tx_status. The default is disabled. Co-developed-by: Charlie Groh <ga58taw@mytum.de> Signed-off-by: Charlie Groh <ga58taw@mytum.de> Signed-off-by: Julius Niedworok <julius.n@gmx.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-28 20:01:06 +00:00
if (buf[0] == '0' && buf[1] == '\0')
local->force_tx_status = 0;
else if (buf[0] == '1' && buf[1] == '\0')
local->force_tx_status = 1;
else
return -EINVAL;
return count;
}
static const struct file_operations force_tx_status_ops = {
.write = force_tx_status_write,
.read = force_tx_status_read,
.open = simple_open,
.llseek = default_llseek,
};
#ifdef CONFIG_PM
static ssize_t reset_write(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
rtnl_lock();
__ieee80211_suspend(&local->hw, NULL);
__ieee80211_resume(&local->hw);
rtnl_unlock();
return count;
}
static const struct file_operations reset_ops = {
.write = reset_write,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 16:52:59 +00:00
.llseek = noop_llseek,
};
#endif
static const char *hw_flag_names[] = {
#define FLAG(F) [IEEE80211_HW_##F] = #F
FLAG(HAS_RATE_CONTROL),
FLAG(RX_INCLUDES_FCS),
FLAG(HOST_BROADCAST_PS_BUFFERING),
FLAG(SIGNAL_UNSPEC),
FLAG(SIGNAL_DBM),
FLAG(NEED_DTIM_BEFORE_ASSOC),
FLAG(SPECTRUM_MGMT),
FLAG(AMPDU_AGGREGATION),
FLAG(SUPPORTS_PS),
FLAG(PS_NULLFUNC_STACK),
FLAG(SUPPORTS_DYNAMIC_PS),
FLAG(MFP_CAPABLE),
FLAG(WANT_MONITOR_VIF),
FLAG(NO_AUTO_VIF),
FLAG(SW_CRYPTO_CONTROL),
FLAG(SUPPORT_FAST_XMIT),
FLAG(REPORTS_TX_ACK_STATUS),
FLAG(CONNECTION_MONITOR),
FLAG(QUEUE_CONTROL),
FLAG(SUPPORTS_PER_STA_GTK),
FLAG(AP_LINK_PS),
FLAG(TX_AMPDU_SETUP_IN_HW),
FLAG(SUPPORTS_RC_TABLE),
FLAG(P2P_DEV_ADDR_FOR_INTF),
FLAG(TIMING_BEACON_ONLY),
FLAG(SUPPORTS_HT_CCK_RATES),
FLAG(CHANCTX_STA_CSA),
FLAG(SUPPORTS_CLONED_SKBS),
FLAG(SINGLE_SCAN_ON_ALL_BANDS),
FLAG(TDLS_WIDER_BW),
FLAG(SUPPORTS_AMSDU_IN_AMPDU),
FLAG(BEACON_TX_STATUS),
FLAG(NEEDS_UNIQUE_STA_ADDR),
FLAG(SUPPORTS_REORDERING_BUFFER),
FLAG(USES_RSS),
FLAG(TX_AMSDU),
FLAG(TX_FRAG_LIST),
FLAG(REPORTS_LOW_ACK),
FLAG(SUPPORTS_TX_FRAG),
FLAG(SUPPORTS_TDLS_BUFFER_STA),
FLAG(DEAUTH_NEED_MGD_TX_PREP),
FLAG(DOESNT_SUPPORT_QOS_NDP),
FLAG(BUFF_MMPDU_TXQ),
FLAG(SUPPORTS_VHT_EXT_NSS_BW),
FLAG(STA_MMPDU_TXQ),
FLAG(TX_STATUS_NO_AMPDU_LEN),
FLAG(SUPPORTS_MULTI_BSSID),
FLAG(SUPPORTS_ONLY_HE_MULTI_BSSID),
FLAG(AMPDU_KEYBORDER_SUPPORT),
FLAG(SUPPORTS_TX_ENCAP_OFFLOAD),
FLAG(SUPPORTS_RX_DECAP_OFFLOAD),
#undef FLAG
};
static ssize_t hwflags_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
size_t bufsz = 30 * NUM_IEEE80211_HW_FLAGS;
char *buf = kzalloc(bufsz, GFP_KERNEL);
char *pos = buf, *end = buf + bufsz - 1;
ssize_t rv;
int i;
if (!buf)
return -ENOMEM;
/* fail compilation if somebody adds or removes
* a flag without updating the name array above
*/
BUILD_BUG_ON(ARRAY_SIZE(hw_flag_names) != NUM_IEEE80211_HW_FLAGS);
for (i = 0; i < NUM_IEEE80211_HW_FLAGS; i++) {
if (test_bit(i, local->hw.flags))
pos += scnprintf(pos, end - pos, "%s\n",
hw_flag_names[i]);
}
rv = simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf));
kfree(buf);
return rv;
}
static ssize_t misc_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
/* Max len of each line is 16 characters, plus 9 for 'pending:\n' */
size_t bufsz = IEEE80211_MAX_QUEUES * 16 + 9;
char *buf;
char *pos, *end;
ssize_t rv;
int i;
int ln;
buf = kzalloc(bufsz, GFP_KERNEL);
if (!buf)
return -ENOMEM;
pos = buf;
end = buf + bufsz - 1;
pos += scnprintf(pos, end - pos, "pending:\n");
for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
ln = skb_queue_len(&local->pending[i]);
pos += scnprintf(pos, end - pos, "[%i] %d\n",
i, ln);
}
rv = simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf));
kfree(buf);
return rv;
}
static ssize_t queues_read(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
unsigned long flags;
char buf[IEEE80211_MAX_QUEUES * 20];
int q, res = 0;
spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
for (q = 0; q < local->hw.queues; q++)
res += sprintf(buf + res, "%02d: %#.8lx/%d\n", q,
local->queue_stop_reasons[q],
skb_queue_len(&local->pending[q]));
spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
return simple_read_from_buffer(user_buf, count, ppos, buf, res);
}
DEBUGFS_READONLY_FILE_OPS(hwflags);
DEBUGFS_READONLY_FILE_OPS(queues);
DEBUGFS_READONLY_FILE_OPS(misc);
/* statistics stuff */
static ssize_t format_devstat_counter(struct ieee80211_local *local,
char __user *userbuf,
size_t count, loff_t *ppos,
int (*printvalue)(struct ieee80211_low_level_stats *stats, char *buf,
int buflen))
{
struct ieee80211_low_level_stats stats;
char buf[20];
int res;
rtnl_lock();
res = drv_get_stats(local, &stats);
rtnl_unlock();
if (res)
return res;
res = printvalue(&stats, buf, sizeof(buf));
return simple_read_from_buffer(userbuf, count, ppos, buf, res);
}
#define DEBUGFS_DEVSTATS_FILE(name) \
static int print_devstats_##name(struct ieee80211_low_level_stats *stats,\
char *buf, int buflen) \
{ \
return scnprintf(buf, buflen, "%u\n", stats->name); \
} \
static ssize_t stats_ ##name## _read(struct file *file, \
char __user *userbuf, \
size_t count, loff_t *ppos) \
{ \
return format_devstat_counter(file->private_data, \
userbuf, \
count, \
ppos, \
print_devstats_##name); \
} \
\
static const struct file_operations stats_ ##name## _ops = { \
.read = stats_ ##name## _read, \
.open = simple_open, \
.llseek = generic_file_llseek, \
};
#define DEBUGFS_STATS_ADD(name) \
debugfs_create_u32(#name, 0400, statsd, &local->name);
#define DEBUGFS_DEVSTATS_ADD(name) \
debugfs_create_file(#name, 0400, statsd, local, &stats_ ##name## _ops);
DEBUGFS_DEVSTATS_FILE(dot11ACKFailureCount);
DEBUGFS_DEVSTATS_FILE(dot11RTSFailureCount);
DEBUGFS_DEVSTATS_FILE(dot11FCSErrorCount);
DEBUGFS_DEVSTATS_FILE(dot11RTSSuccessCount);
void debugfs_hw_add(struct ieee80211_local *local)
{
struct dentry *phyd = local->hw.wiphy->debugfsdir;
struct dentry *statsd;
if (!phyd)
return;
local->debugfs.keys = debugfs_create_dir("keys", phyd);
DEBUGFS_ADD(total_ps_buffered);
DEBUGFS_ADD(wep_iv);
DEBUGFS_ADD(rate_ctrl_alg);
DEBUGFS_ADD(queues);
DEBUGFS_ADD(misc);
#ifdef CONFIG_PM
DEBUGFS_ADD_MODE(reset, 0200);
#endif
DEBUGFS_ADD(hwflags);
DEBUGFS_ADD(user_power);
DEBUGFS_ADD(power);
DEBUGFS_ADD(hw_conf);
mac80211: debugfs option to force TX status frames At Technical University of Munich we use MAC 802.11 TX status frames to perform several measurements in MAC 802.11 setups. With ath based drivers this was possible until commit d94a461d7a7df6 ("ath9k: use ieee80211_tx_status_noskb where possible") as the driver ignored the IEEE80211_TX_CTL_REQ_TX_STATUS flag and always delivered tx_status frames. Since that commit, this behavior was changed and the driver now adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. Due to performance reasons, IEEE80211_TX_CTL_REQ_TX_STATUS is not set for data frames from interfaces in managed mode. Hence, frames that are sent from a managed mode interface do never deliver tx_status frames. This remains true even if a monitor mode interface (the measurement interface) is added to the same ieee80211 physical device. Thus, there is no possibility for receiving tx_status frames for frames sent on an interface in managed mode, if the driver adheres to IEEE80211_TX_CTL_REQ_TX_STATUS. In order to force delivery of tx_status frames for research and debugging purposes, implement a debugfs option force_tx_status for ieee80211 physical devices. When this option is set for a physical device, IEEE80211_TX_CTL_REQ_TX_STATUS is enabled in all packets sent from that device. This option can be set via /sys/kernel/debug/ieee80211/<dev>/force_tx_status. The default is disabled. Co-developed-by: Charlie Groh <ga58taw@mytum.de> Signed-off-by: Charlie Groh <ga58taw@mytum.de> Signed-off-by: Julius Niedworok <julius.n@gmx.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-03-28 20:01:06 +00:00
DEBUGFS_ADD_MODE(force_tx_status, 0600);
if (local->ops->wake_tx_queue)
DEBUGFS_ADD_MODE(aqm, 0600);
DEBUGFS_ADD_MODE(airtime_flags, 0600);
mac80211: Add airtime accounting and scheduling to TXQs This adds airtime accounting and scheduling to the mac80211 TXQ scheduler. A new callback, ieee80211_sta_register_airtime(), is added that drivers can call to report airtime usage for stations. When airtime information is present, mac80211 will schedule TXQs (through ieee80211_next_txq()) in a way that enforces airtime fairness between active stations. This scheduling works the same way as the ath9k in-driver airtime fairness scheduling. If no airtime usage is reported by the driver, the scheduler will default to round-robin scheduling. For drivers that don't control TXQ scheduling in software, a new API function, ieee80211_txq_may_transmit(), is added which the driver can use to check if the TXQ is eligible for transmission, or should be throttled to enforce fairness. Calls to this function must also be enclosed in ieee80211_txq_schedule_{start,end}() calls to ensure proper locking. The API ieee80211_txq_may_transmit() also ensures that TXQ list will be aligned aginst driver's own round-robin scheduler list. i.e it rotates the TXQ list till it makes the requested node becomes the first entry in TXQ list. Thus both the TXQ list and driver's list are in sync. Co-developed-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Louie Lu <git@louie.lu> [added debugfs write op to reset airtime counter] Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-19 01:02:08 +00:00
mac80211: Implement Airtime-based Queue Limit (AQL) In order for the Fq_CoDel algorithm integrated in mac80211 layer to operate effectively to control excessive queueing latency, the CoDel algorithm requires an accurate measure of how long packets stays in the queue, AKA sojourn time. The sojourn time measured at the mac80211 layer doesn't include queueing latency in the lower layer (firmware/hardware) and CoDel expects lower layer to have a short queue. However, most 802.11ac chipsets offload tasks such TX aggregation to firmware or hardware, thus have a deep lower layer queue. Without a mechanism to control the lower layer queue size, packets only stay in mac80211 layer transiently before being sent to firmware queue. As a result, the sojourn time measured by CoDel in the mac80211 layer is almost always lower than the CoDel latency target, hence CoDel does little to control the latency, even when the lower layer queue causes excessive latency. The Byte Queue Limits (BQL) mechanism is commonly used to address the similar issue with wired network interface. However, this method cannot be applied directly to the wireless network interface. "Bytes" is not a suitable measure of queue depth in the wireless network, as the data rate can vary dramatically from station to station in the same network, from a few Mbps to over Gbps. This patch implements an Airtime-based Queue Limit (AQL) to make CoDel work effectively with wireless drivers that utilized firmware/hardware offloading. AQL allows each txq to release just enough packets to the lower layer to form 1-2 large aggregations to keep hardware fully utilized and retains the rest of the frames in mac80211 layer to be controlled by the CoDel algorithm. Signed-off-by: Kan Yan <kyan@google.com> [ Toke: Keep API to set pending airtime internal, fix nits in commit msg ] Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20191119060610.76681-4-kyan@google.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-11-19 06:06:09 +00:00
DEBUGFS_ADD(aql_txq_limit);
debugfs_create_u32("aql_threshold", 0600,
phyd, &local->aql_threshold);
statsd = debugfs_create_dir("statistics", phyd);
/* if the dir failed, don't put all the other things into the root! */
if (!statsd)
return;
#ifdef CONFIG_MAC80211_DEBUG_COUNTERS
DEBUGFS_STATS_ADD(dot11TransmittedFragmentCount);
DEBUGFS_STATS_ADD(dot11MulticastTransmittedFrameCount);
DEBUGFS_STATS_ADD(dot11FailedCount);
DEBUGFS_STATS_ADD(dot11RetryCount);
DEBUGFS_STATS_ADD(dot11MultipleRetryCount);
DEBUGFS_STATS_ADD(dot11FrameDuplicateCount);
DEBUGFS_STATS_ADD(dot11ReceivedFragmentCount);
DEBUGFS_STATS_ADD(dot11MulticastReceivedFrameCount);
DEBUGFS_STATS_ADD(dot11TransmittedFrameCount);
DEBUGFS_STATS_ADD(tx_handlers_drop);
DEBUGFS_STATS_ADD(tx_handlers_queued);
DEBUGFS_STATS_ADD(tx_handlers_drop_wep);
DEBUGFS_STATS_ADD(tx_handlers_drop_not_assoc);
DEBUGFS_STATS_ADD(tx_handlers_drop_unauth_port);
DEBUGFS_STATS_ADD(rx_handlers_drop);
DEBUGFS_STATS_ADD(rx_handlers_queued);
DEBUGFS_STATS_ADD(rx_handlers_drop_nullfunc);
DEBUGFS_STATS_ADD(rx_handlers_drop_defrag);
DEBUGFS_STATS_ADD(tx_expand_skb_head);
DEBUGFS_STATS_ADD(tx_expand_skb_head_cloned);
DEBUGFS_STATS_ADD(rx_expand_skb_head_defrag);
DEBUGFS_STATS_ADD(rx_handlers_fragments);
DEBUGFS_STATS_ADD(tx_status_drop);
#endif
DEBUGFS_DEVSTATS_ADD(dot11ACKFailureCount);
DEBUGFS_DEVSTATS_ADD(dot11RTSFailureCount);
DEBUGFS_DEVSTATS_ADD(dot11FCSErrorCount);
DEBUGFS_DEVSTATS_ADD(dot11RTSSuccessCount);
}