leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d9c12685c6
linux/arch/arm/boot/dts/tegra30-cardhu.dtsi

651 lines
16 KiB
Plaintext
Raw Normal View History

ARM: tegra: cardhu: Add power and volume keys The Cardhu has a power key on the top-right as well as volume up and volume down keys on the right side. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-18 13:58:20 +00:00
#include <dt-bindings/input/input.h>
ARM: tegra: use #include for all device trees Replace /include/ (dtc) with #include (C pre-processor) for all Tegra DT files, so that gcc -E handles the entire include tree, and hence any of those files can #include some other file e.g. for constant definitions. This allows future use of #defines and header files in order to define names for various constants, such as the IDs and flags in GPIO specifiers. Use of those features will increase the readability of the device tree files. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-17 22:38:21 +00:00
#include "tegra30.dtsi"
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
ARM: dt: tegra: cardhu: split dts file for support multiple board versions There is multiple version of cardhu starting from A01 to A07. Cardhu A01 and A03 are not supported. Cardhu A02 will have different sets of GPIOs for fixed regulator compare to cardhu A04. The Cardhu A05, A06, A07 are compatibe with A04. Based on cardhu version, the related dts file need to be chosen like for cardhu A02, use tegra30-cardhu-a02.dts, cardhu A04 and more, use tegra30-cardhu-a04.dts. This patch create the DTS file A02 and A04 and convert tegra30-cardhu.dts as dts include file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:38 +00:00
/**
* This file contains common DT entry for all fab version of Cardhu.
* There is multiple fab version of Cardhu starting from A01 to A07.
* Cardhu fab version A01 and A03 are not supported. Cardhu fab version
* A02 will have different sets of GPIOs for fixed regulator compare to
* Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are
* compatible with fab version A04. Based on Cardhu fab version, the
* related dts file need to be chosen like for Cardhu fab version A02,
* use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use
* tegra30-cardhu-a04.dts.
* The identification of board is done in two ways, by looking the sticker
* on PCB and by reading board id eeprom.
ARM: tegra: Cardhu device-tree comment spelling fix The word "sticker" was misspelled as "stciker". Fix it. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> [treding@nvidia.com: add a brief commit message] Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-10 21:35:56 +00:00
* The sticker will have number like 600-81291-1000-002 C.3. In this 4th
ARM: dt: tegra: cardhu: split dts file for support multiple board versions There is multiple version of cardhu starting from A01 to A07. Cardhu A01 and A03 are not supported. Cardhu A02 will have different sets of GPIOs for fixed regulator compare to cardhu A04. The Cardhu A05, A06, A07 are compatibe with A04. Based on cardhu version, the related dts file need to be chosen like for cardhu A02, use tegra30-cardhu-a02.dts, cardhu A04 and more, use tegra30-cardhu-a04.dts. This patch create the DTS file A02 and A04 and convert tegra30-cardhu.dts as dts include file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:38 +00:00
* number is the fab version like here it is 002 and hence fab version A02.
* The (downstream internal) U-Boot of Cardhu display the board-id as
* follows:
* BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00
* In this Fab version is 02 i.e. A02.
* The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56).
* The location 0x8 of this eeprom contains the Fab version. It is 1 byte
* wide.
*/
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
/ {
model = "NVIDIA Tegra30 Cardhu evaluation board";
compatible = "nvidia,cardhu", "nvidia,tegra30";
ARM: tegra: set up /aliases entries for RTCs This ensures that the PMIC RTC provides the system time, rather than the on-SoC RTC, which is not battery-backed. tegra124-venice2.dts isn't touched yet since we haven't added any off- SoC RTC device to its device tree. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-09 21:43:59 +00:00
aliases {
ARM: tegra: fix RTC0 alias for Cardhu This alias entry was evidently cut/paste from a different board, and not correctly updated to match Cardhu. Fix this. Fixes: 553c0a200e20 ("ARM: tegra: set up /aliases entries for RTCs") Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-02-14 00:18:26 +00:00
rtc0 = "/i2c@7000d000/tps65911@2d";
ARM: tegra: set up /aliases entries for RTCs This ensures that the PMIC RTC provides the system time, rather than the on-SoC RTC, which is not battery-backed. tegra124-venice2.dts isn't touched yet since we haven't added any off- SoC RTC device to its device tree. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-09 21:43:59 +00:00
rtc1 = "/rtc@7000e000";
ARM: dts: tegra: move serial aliases to per-board There are general changes pending to make the /aliases/serial* entries number the serial ports on the system. On Tegra, so far the ports have been just numbered dynamically as they are configured so that makes them change. To avoid this, add specific aliases per board to keep the old numbers. This allows us to change the numbering by default on future SoCs while keeping the numbering on existing boards. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-11 20:49:30 +00:00
serial0 = &uarta;
serial1 = &uartc;
ARM: tegra: set up /aliases entries for RTCs This ensures that the PMIC RTC provides the system time, rather than the on-SoC RTC, which is not battery-backed. tegra124-venice2.dts isn't touched yet since we haven't added any off- SoC RTC device to its device tree. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-09 21:43:59 +00:00
};
ARM: tegra: Add stdout-path for various boards For Tegra boards, the device-tree alias serial0 is used for the console and so add the stdout-path information so that the console no longer needs to be passed via the kernel boot parameters. This has been tested on boards, tegra20-trimslice, tegra30-beaver, tegra114-dalmore and tegra124-jetson-tk1. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-09 13:51:59 +00:00
chosen {
stdout-path = "serial0:115200n8";
};
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
memory {
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 22:11:38 +00:00
reg = <0x80000000 0x40000000>;
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
};
ARM: tegra: add missing unit addresses to DT DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 00:53:16 +00:00
pcie-controller@00003000 {
ARM: tegra: Enable PCIe controller on Cardhu Root port 2 is routed to the bottom connector on Cardhu and is used by the development dock to provide gigabit ethernet and USB functionality. Signed-off-by: Jay Agarwal <jagarwal@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-09 14:49:27 +00:00
status = "okay";
ARM: tegra: Add new PCIe regulator properties These new properties more accurately reflect the real connections of the boards and therefore make it easier to match them up with schematics. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-05-28 14:49:12 +00:00
/* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
avdd-pexb-supply = <&ldo1_reg>;
vdd-pexb-supply = <&ldo1_reg>;
avdd-pex-pll-supply = <&ldo1_reg>;
hvdd-pex-supply = <&pex_hvdd_3v3_reg>;
vddio-pex-ctl-supply = <&sys_3v3_reg>;
avdd-plle-supply = <&ldo2_reg>;
ARM: tegra: Enable PCIe controller on Cardhu Root port 2 is routed to the bottom connector on Cardhu and is used by the development dock to provide gigabit ethernet and USB functionality. Signed-off-by: Jay Agarwal <jagarwal@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-09 14:49:27 +00:00
pci@1,0 {
nvidia,num-lanes = <4>;
};
pci@2,0 {
nvidia,num-lanes = <1>;
};
pci@3,0 {
status = "okay";
nvidia,num-lanes = <1>;
};
};
ARM: tegra: Enable LVDS on Cardhu Add backlight and panel nodes for the Cardhu 10.1" WXGA TFT LCD panel. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-19 15:59:26 +00:00
host1x@50000000 {
dc@54200000 {
rgb {
status = "okay";
nvidia,panel = <&panel>;
};
};
};
ARM: tegra: add missing unit addresses to DT DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 00:53:16 +00:00
pinmux@70000868 {
ARM: dt: tegra cardhu: add pinmux to device tree This adds a minimal pinmux configuration to the Tegra Cardhu device tree. Initially, just the built-in eMMC and SD card slot are configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net
2012-03-13 19:28:02 +00:00
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
sdmmc1_clk_pz0 {
nvidia,pins = "sdmmc1_clk_pz0";
nvidia,function = "sdmmc1";
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 10:44:09 +00:00
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
ARM: dt: tegra cardhu: add pinmux to device tree This adds a minimal pinmux configuration to the Tegra Cardhu device tree. Initially, just the built-in eMMC and SD card slot are configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net
2012-03-13 19:28:02 +00:00
};
sdmmc1_cmd_pz1 {
nvidia,pins = "sdmmc1_cmd_pz1",
"sdmmc1_dat0_py7",
"sdmmc1_dat1_py6",
"sdmmc1_dat2_py5",
"sdmmc1_dat3_py4";
nvidia,function = "sdmmc1";
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 10:44:09 +00:00
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
ARM: dt: tegra cardhu: add pinmux to device tree This adds a minimal pinmux configuration to the Tegra Cardhu device tree. Initially, just the built-in eMMC and SD card slot are configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net
2012-03-13 19:28:02 +00:00
};
ARM: dt: t30 cardhu: set pinmux and power for wlan Configure pinmux as required for WiFi. Enable the SDHCI1 controller for a02 and a04 board, which is connected to the WiFi module. For now, always enable the regulator that provides power to the Wifi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 08:54:59 +00:00
sdmmc3_clk_pa6 {
nvidia,pins = "sdmmc3_clk_pa6";
nvidia,function = "sdmmc3";
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 10:44:09 +00:00
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
ARM: dt: t30 cardhu: set pinmux and power for wlan Configure pinmux as required for WiFi. Enable the SDHCI1 controller for a02 and a04 board, which is connected to the WiFi module. For now, always enable the regulator that provides power to the Wifi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 08:54:59 +00:00
};
sdmmc3_cmd_pa7 {
nvidia,pins = "sdmmc3_cmd_pa7",
"sdmmc3_dat0_pb7",
"sdmmc3_dat1_pb6",
"sdmmc3_dat2_pb5",
"sdmmc3_dat3_pb4";
nvidia,function = "sdmmc3";
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 10:44:09 +00:00
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
ARM: dt: t30 cardhu: set pinmux and power for wlan Configure pinmux as required for WiFi. Enable the SDHCI1 controller for a02 and a04 board, which is connected to the WiFi module. For now, always enable the regulator that provides power to the Wifi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 08:54:59 +00:00
};
ARM: dt: tegra cardhu: add pinmux to device tree This adds a minimal pinmux configuration to the Tegra Cardhu device tree. Initially, just the built-in eMMC and SD card slot are configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net
2012-03-13 19:28:02 +00:00
sdmmc4_clk_pcc4 {
nvidia,pins = "sdmmc4_clk_pcc4",
"sdmmc4_rst_n_pcc3";
nvidia,function = "sdmmc4";
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 10:44:09 +00:00
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
ARM: dt: tegra cardhu: add pinmux to device tree This adds a minimal pinmux configuration to the Tegra Cardhu device tree. Initially, just the built-in eMMC and SD card slot are configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net
2012-03-13 19:28:02 +00:00
};
sdmmc4_dat0_paa0 {
nvidia,pins = "sdmmc4_dat0_paa0",
"sdmmc4_dat1_paa1",
"sdmmc4_dat2_paa2",
"sdmmc4_dat3_paa3",
"sdmmc4_dat4_paa4",
"sdmmc4_dat5_paa5",
"sdmmc4_dat6_paa6",
"sdmmc4_dat7_paa7";
nvidia,function = "sdmmc4";
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 10:44:09 +00:00
nvidia,pull = <TEGRA_PIN_PULL_UP>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
ARM: dt: tegra cardhu: add pinmux to device tree This adds a minimal pinmux configuration to the Tegra Cardhu device tree. Initially, just the built-in eMMC and SD card slot are configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net
2012-03-13 19:28:02 +00:00
};
ARM: dt: tegra cardhu: basic audio support Add WM8903 codec nodes, and top-level sound complex node for basic analog audio over headset jack and internal speakers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-27 18:41:37 +00:00
dap2_fs_pa2 {
nvidia,pins = "dap2_fs_pa2",
"dap2_sclk_pa3",
"dap2_din_pa4",
"dap2_dout_pa5";
nvidia,function = "i2s1";
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 10:44:09 +00:00
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
ARM: dt: tegra cardhu: basic audio support Add WM8903 codec nodes, and top-level sound complex node for basic analog audio over headset jack and internal speakers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-27 18:41:37 +00:00
};
ARM: dt: t30 cardhu: set pinmux and power for wlan Configure pinmux as required for WiFi. Enable the SDHCI1 controller for a02 and a04 board, which is connected to the WiFi module. For now, always enable the regulator that provides power to the Wifi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 08:54:59 +00:00
sdio3 {
nvidia,pins = "drive_sdio3";
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 10:44:09 +00:00
nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
nvidia,schmitt = <TEGRA_PIN_DISABLE>;
ARM: dt: t30 cardhu: set pinmux and power for wlan Configure pinmux as required for WiFi. Enable the SDHCI1 controller for a02 and a04 board, which is connected to the WiFi module. For now, always enable the regulator that provides power to the Wifi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 08:54:59 +00:00
nvidia,pull-down-strength = <46>;
nvidia,pull-up-strength = <42>;
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 10:44:09 +00:00
nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>;
nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>;
ARM: dt: t30 cardhu: set pinmux and power for wlan Configure pinmux as required for WiFi. Enable the SDHCI1 controller for a02 and a04 board, which is connected to the WiFi module. For now, always enable the regulator that provides power to the Wifi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 08:54:59 +00:00
};
ARM: tegra: cardhu: register UARTC UARTC is used for the interfacing with bluetooth device. Register this UART channel as high speed serial channel so that it can use the APB DMA for data transfer. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-16 13:06:12 +00:00
uart3_txd_pw6 {
nvidia,pins = "uart3_txd_pw6",
"uart3_cts_n_pa1",
"uart3_rts_n_pc0",
"uart3_rxd_pw7";
nvidia,function = "uartc";
ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines Use Tegra pinconrol dt-binding macro to set the values of different pinmux properties of Tegra30 platforms. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-05 10:44:09 +00:00
nvidia,pull = <TEGRA_PIN_PULL_NONE>;
nvidia,tristate = <TEGRA_PIN_DISABLE>;
ARM: tegra: cardhu: register UARTC UARTC is used for the interfacing with bluetooth device. Register this UART channel as high speed serial channel so that it can use the APB DMA for data transfer. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-16 13:06:12 +00:00
};
ARM: dt: tegra cardhu: add pinmux to device tree This adds a minimal pinmux configuration to the Tegra Cardhu device tree. Initially, just the built-in eMMC and SD card slot are configured. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net
2012-03-13 19:28:02 +00:00
};
};
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
serial@70006000 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:32:56 +00:00
status = "okay";
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
};
ARM: tegra: cardhu: register UARTC UARTC is used for the interfacing with bluetooth device. Register this UART channel as high speed serial channel so that it can use the APB DMA for data transfer. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-01-16 13:06:12 +00:00
serial@70006200 {
compatible = "nvidia,tegra30-hsuart";
status = "okay";
};
ARM: tegra: Enable LVDS on Cardhu Add backlight and panel nodes for the Cardhu 10.1" WXGA TFT LCD panel. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-19 15:59:26 +00:00
pwm@7000a000 {
status = "okay";
};
panelddc: i2c@7000c000 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:32:56 +00:00
status = "okay";
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
clock-frequency = <100000>;
};
i2c@7000c400 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:32:56 +00:00
status = "okay";
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
clock-frequency = <100000>;
};
i2c@7000c500 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:32:56 +00:00
status = "okay";
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
clock-frequency = <100000>;
ARM: dt: tegra: enable als and proximity sensor Add the device info for ALS and proximity sensor for tegra boards cardhu, ventana and seaboard. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: s/PZ02/PZ2/ in .dts files, s/seabridge/seaboard/ in commit description] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-23 12:11:36 +00:00
/* ALS and Proximity sensor */
isl29028@44 {
ARM: tegra: Update isl29028 compatible string to use isil vendor prefix "isil" and "isl" prefixes are used at various locations inside the kernel to reference Intersil corporation. This patch is part of a series fixing those locations were "isl" is used in compatible strings to use the now expected "isil" prefix instead (NASDAQ symbol for Intersil and most used version). Note: isl29028 is an I2C device so the patch does not in fact currently depend on the introduction of "isil"-based compatible string in isl29028 driver because I2C core does not check the prefix yet. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-16 21:21:16 +00:00
compatible = "isil,isl29028";
ARM: dt: tegra: enable als and proximity sensor Add the device info for ALS and proximity sensor for tegra boards cardhu, ventana and seaboard. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: s/PZ02/PZ2/ in .dts files, s/seabridge/seaboard/ in commit description] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-23 12:11:36 +00:00
reg = <0x44>;
interrupt-parent = <&gpio>;
ARM: tegra: convert device tree files to use IRQ defines Use the GIC and standard IRQ binding defines in all IRQ specifiers. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 19:51:51 +00:00
interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
ARM: dt: tegra: enable als and proximity sensor Add the device info for ALS and proximity sensor for tegra boards cardhu, ventana and seaboard. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: s/PZ02/PZ2/ in .dts files, s/seabridge/seaboard/ in commit description] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-23 12:11:36 +00:00
};
ARM: tegra: enable PCA9546 on Cardhu Cardhu has a PCA9546 for I2C bus extension, which connects to 3 cameras. It's required for Tegra V4L2 soc camera driver and camera sensor drivers. Signed-off-by: Bryan Wu <pengw@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-02-07 23:54:58 +00:00
i2cmux@70 {
compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
};
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
};
i2c@7000c700 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:32:56 +00:00
status = "okay";
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
clock-frequency = <100000>;
};
i2c@7000d000 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:32:56 +00:00
status = "okay";
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
clock-frequency = <100000>;
ARM: dt: tegra cardhu: basic audio support Add WM8903 codec nodes, and top-level sound complex node for basic analog audio over headset jack and internal speakers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-27 18:41:37 +00:00
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
ARM: tegra: convert device tree files to use IRQ defines Use the GIC and standard IRQ binding defines in all IRQ specifiers. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 19:51:51 +00:00
interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
ARM: dt: tegra cardhu: basic audio support Add WM8903 codec nodes, and top-level sound complex node for basic analog audio over headset jack and internal speakers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-27 18:41:37 +00:00
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
};
ARM: dt: tegra: cardhu: register core regulator tps62361 Add device info for the core regulator tps62360 in tegra-cardhu dts file. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: fixed node name to reflect actual device type] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-05-10 20:38:45 +00:00
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
pmic: tps65911@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
ARM: tegra: convert device tree files to use IRQ defines Use the GIC and standard IRQ binding defines in all IRQ specifiers. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 19:51:51 +00:00
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
#interrupt-cells = <2>;
interrupt-controller;
ARM: dt: tegra: configure power off for some boards For Seaboard, Ventana, and Cardhu, add DT property to tell the regulator that it should provide the pm_power_off() implementation. This allows "shutdown" to work. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-11 17:42:26 +00:00
ti,system-power-controller;
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
#gpio-cells = <2>;
gpio-controller;
vcc1-supply = <&vdd_ac_bat_reg>;
vcc2-supply = <&vdd_ac_bat_reg>;
vcc3-supply = <&vio_reg>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
vcc4-supply = <&vdd_5v0_reg>;
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
vcc5-supply = <&vdd_ac_bat_reg>;
vcc6-supply = <&vdd2_reg>;
vcc7-supply = <&vdd_ac_bat_reg>;
vccio-supply = <&vdd_ac_bat_reg>;
regulators {
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
vdd1_reg: vdd1 {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulator-name = "vddio_ddr_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
vdd2_reg: vdd2 {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulator-name = "vdd_1v5_gen";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
vddctrl_reg: vddctrl {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulator-name = "vdd_cpu,vdd_sys";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
vio_reg: vio {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulator-name = "vdd_1v8_gen";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
ldo1_reg: ldo1 {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulator-name = "vdd_pexa,vdd_pexb";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
ldo2_reg: ldo2 {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulator-name = "vdd_sata,avdd_plle";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
};
/* LDO3 is not connected to anything */
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
ldo4_reg: ldo4 {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulator-name = "vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
ldo5_reg: ldo5 {
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
regulator-name = "vddio_sdmmc,avdd_vdac";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
ldo6_reg: ldo6 {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulator-name = "avdd_dsi_csi,pwrdet_mipi";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
ldo7_reg: ldo7 {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulator-name = "vdd_pllm,x,u,a_p_c_s";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ARM: tegra: update *.dts for regulator-compatible deprecation Commit 13511de "regulator: deprecate regulator-compatible DT property" now allows for simpler content within the regulators node within a PMIC. Modify all the Tegra device tree files to take advantage of this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
2012-09-20 23:04:06 +00:00
ldo8_reg: ldo8 {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulator-name = "vdd_ddr_hs";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
};
};
ARM: tegra: add DT entry for nct1008 to Cardhu Enable thermal sensor nct1008 for Tegra30 Cardhu. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-12 07:49:23 +00:00
ARM: tegra: add vcc supply for nct1008 to Cardhu Add vcc-supply property in the nct1008 node, and set it as sys_3v3_reg. change the name of this node to temp-sensor. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-07 09:28:29 +00:00
temperature-sensor@4c {
ARM: tegra: add DT entry for nct1008 to Cardhu Enable thermal sensor nct1008 for Tegra30 Cardhu. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-12 07:49:23 +00:00
compatible = "onnn,nct1008";
reg = <0x4c>;
ARM: tegra: add vcc supply for nct1008 to Cardhu Add vcc-supply property in the nct1008 node, and set it as sys_3v3_reg. change the name of this node to temp-sensor. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-10-07 09:28:29 +00:00
vcc-supply = <&sys_3v3_reg>;
ARM: tegra: add DT entry for nct1008 to Cardhu Enable thermal sensor nct1008 for Tegra30 Cardhu. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-12 07:49:23 +00:00
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
};
ARM: tegra: fix DT node ordering in Tegra30 Cardhu Nodes should be sorted by reg. Fix location of the tps62361 node. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-15 16:33:53 +00:00
ARM: tegra: add missing unit addresses to DT DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 00:53:16 +00:00
tps62361@60 {
ARM: tegra: fix DT node ordering in Tegra30 Cardhu Nodes should be sorted by reg. Fix location of the tps62361 node. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-07-15 16:33:53 +00:00
compatible = "ti,tps62361";
reg = <0x60>;
regulator-name = "tps62361-vout";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
ti,vsel0-state-high;
ti,vsel1-state-high;
};
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
};
ARM: dt: Add SD controller configuration to Tegra Cardhu Cardhu uses Tegra's SD ports as follows: SDMMC1: User SD slot, with GPIOs for power, CD, and WP. SDMMC2: Not used SDMMC3: WiFi (currently disabled pending future investigation) SDMMC4: Internal eMMC Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-02-01 23:29:57 +00:00
ARM: tegra: dts: cardhu: enable SLINK4 Enable SLINK4 and connected device in Tegra30 based platform Cardhu. Setting maximum spi frequency to 25MHz. SPI serial flash is connected on CS1 of SLINK4 on cardhu platform. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: swapped reg/compatible order to be consistent] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-10-31 09:02:54 +00:00
spi@7000da00 {
status = "okay";
spi-max-frequency = <25000000>;
spi-flash@1 {
compatible = "winbond,w25q32";
reg = <1>;
spi-max-frequency = <20000000>;
};
};
ARM: tegra: add missing unit addresses to DT DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 00:53:16 +00:00
pmc@7000e400 {
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
status = "okay";
nvidia,invert-interrupt;
ARM: tegra: enable LP1 suspend mode Enabling the LP1 suspend mode for Tegra devices. Tested-by: Marc Dietrich <marvin24@gmx.de> # paz00 board Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-12 09:40:07 +00:00
nvidia,suspend-mode = <1>;
ARM: dts: tegra: add the PM configurations of PMC Adding the PM configuration of PMC when the platform support suspend function. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 11:31:52 +00:00
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <200>;
nvidia,core-pwr-good-time = <3845 3845>;
nvidia,core-pwr-off-time = <0>;
nvidia,core-power-req-active-high;
nvidia,sys-clock-req-active-high;
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
};
ARM: tegra: fix node sort order For Tegra DT files, I've been attempting to keep the nodes sorted in the order: 1) Nodes with reg, in order of reg. 2) Nodes without reg, alphabetically. This patch fixes a few escapees that I missed:-( The diffs look larger than they really are, because sometimes when one node was moved up or down, diff chose to represent this as many other nodes being moved the other way! Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 21:43:45 +00:00
ahub@70080000 {
i2s@70080400 {
status = "okay";
};
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:03:26 +00:00
sdhci@78000000 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:32:56 +00:00
status = "okay";
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio TEGRA_GPIO(T, 3) GPIO_ACTIVE_HIGH>;
power-gpios = <&gpio TEGRA_GPIO(D, 7) GPIO_ACTIVE_HIGH>;
mmc: dt: Consolidate DT bindings This patch unifies the current DT MMC bindings documentation and code, adds generic MMC DT bindings documentation, and updates .dts files for consistency. [cjb: typo fixes, addition of max-frequency property] Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-13 04:14:24 +00:00
bus-width = <4>;
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:03:26 +00:00
};
sdhci@78000600 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:32:56 +00:00
status = "okay";
mmc: dt: Consolidate DT bindings This patch unifies the current DT MMC bindings documentation and code, adds generic MMC DT bindings documentation, and updates .dts files for consistency. [cjb: typo fixes, addition of max-frequency property] Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-13 04:14:24 +00:00
bus-width = <8>;
ARM: tegra: add non-removable and keep-power-in-suspend property for MMC This patch adds "non-removable" property of MMC host where the eMMC device is for Tegra platform. And the "keep-power-in-suspend" property was used for the SDIO device that need this to go into suspend mode (e.g. BRCM43xx series). Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 20:34:39 +00:00
non-removable;
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-11 23:03:26 +00:00
};
ARM: tegra: add USB DT entries for Tegra30 Add device tree entries for the 3 USB controllers and PHYs and enable the third controller on Cardhu and Beaver boards. Fix VBUS regulator entries on Beaver. The GPIO pins were wrong. Also, internal pullups need to be enabled on those pins. Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Tested-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-08-01 15:00:17 +00:00
usb@7d008000 {
status = "okay";
};
usb-phy@7d008000 {
vbus-supply = <&usb3_vbus_reg>;
status = "okay";
};
ARM: tegra: Enable LVDS on Cardhu Add backlight and panel nodes for the Cardhu 10.1" WXGA TFT LCD panel. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-19 15:59:26 +00:00
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
power-supply = <&vdd_bl_reg>;
pwms = <&pwm 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
};
ARM: tegra: add clock source of PMC to device trees Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 11:31:27 +00:00
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
ARM: tegra: add missing unit addresses to DT DT node names should include a unit address iff the node has a reg property. For Tegra DTs at least, we were previously applying a different rule, namely that node names only needed to include a unit address if it was required to make the node name unique. Consequently, many unit addresses are missing. Add them. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-11-26 00:53:16 +00:00
clk32k_in: clock@0 {
ARM: tegra: add clock source of PMC to device trees Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 11:31:27 +00:00
compatible = "fixed-clock";
ARM: tegra: Add spaces around = in properties This seems to have been copied and pasted since the beginning of time, though only until Tegra124, likely because that DT was written from scratch or it was fixed along the way. Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-06-10 16:55:24 +00:00
reg = <0>;
ARM: tegra: add clock source of PMC to device trees Adding the bindings of the clock source of PMC in DT. Signed-off-by: Joseph Lo <josephl@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-04-03 11:31:27 +00:00
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
ARM: tegra: Enable LVDS on Cardhu Add backlight and panel nodes for the Cardhu 10.1" WXGA TFT LCD panel. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-12-19 15:59:26 +00:00
panel: panel {
compatible = "chunghwa,claa101wb01", "simple-panel";
ddc-i2c-bus = <&panelddc>;
power-supply = <&vdd_pnl1_reg>;
enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>;
backlight = <&backlight>;
};
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd_ac_bat_reg: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vdd_ac_bat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
cam_1v8_reg: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "cam_1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(BB, 4) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
vin-supply = <&vio_reg>;
};
cp_5v_reg: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "cp_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
regulator-always-on;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
};
emmc_3v3_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "emmc_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
vin-supply = <&sys_3v3_reg>;
};
modem_3v3_reg: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "modem_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(D, 6) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
};
pex_hvdd_3v3_reg: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "pex_hvdd_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(L, 7) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
vin-supply = <&sys_3v3_reg>;
};
vdd_cam1_ldo_reg: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "vdd_cam1_ldo";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
vin-supply = <&sys_3v3_reg>;
};
vdd_cam2_ldo_reg: regulator@7 {
compatible = "regulator-fixed";
reg = <7>;
regulator-name = "vdd_cam2_ldo";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
vin-supply = <&sys_3v3_reg>;
};
vdd_cam3_ldo_reg: regulator@8 {
compatible = "regulator-fixed";
reg = <8>;
regulator-name = "vdd_cam3_ldo";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
vin-supply = <&sys_3v3_reg>;
};
vdd_com_reg: regulator@9 {
compatible = "regulator-fixed";
reg = <9>;
regulator-name = "vdd_com";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
ARM: dt: t30 cardhu: set pinmux and power for wlan Configure pinmux as required for WiFi. Enable the SDHCI1 controller for a02 and a04 board, which is connected to the WiFi module. For now, always enable the regulator that provides power to the Wifi module. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-21 08:54:59 +00:00
regulator-always-on;
regulator-boot-on;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
vin-supply = <&sys_3v3_reg>;
};
vdd_fuse_3v3_reg: regulator@10 {
compatible = "regulator-fixed";
reg = <10>;
regulator-name = "vdd_fuse_3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(L, 6) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
vin-supply = <&sys_3v3_reg>;
};
vdd_pnl1_reg: regulator@11 {
compatible = "regulator-fixed";
reg = <11>;
regulator-name = "vdd_pnl1";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
vin-supply = <&sys_3v3_reg>;
};
vdd_vid_reg: regulator@12 {
compatible = "regulator-fixed";
reg = <12>;
regulator-name = "vddio_vid";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
gpio = <&gpio TEGRA_GPIO(T, 0) GPIO_ACTIVE_HIGH>;
ARM: tegra: cardhu: add dt entry for fixed regulators Cadhu have multiple power rails which are controlled by GPIOs. Add support of these power rail control through fixed regulators. Add entry for all fixed regulators for cardhu-a02 and a04. The details are taken from downstream kernel. Some points on this change are: * Add the tps65910-LDO5 entry and make it always ON to supply power to SDMMC. Once the sd driver support regulator handling, this flag will be remove. * Dropping registration of rail vdd_sdmmc1 as the gpio is used by sdhci power-gpio. This need to fix in sdhci driver and then need to add the registration mechanism. Just removing power-gpio and adding fixed regulator with this gpio is causing the sd access to fail because first probe call of this regulator fails due to non-available of parent and so it calls gpio_free() which disable the pins in gpio mode make pin output to LOW causes power to OFF. In probe retry, it got success and it powered-on but it again need to do again numeration of card here. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:39 +00:00
gpio-open-drain;
vin-supply = <&vdd_5v0_reg>;
};
ARM: dt: tegra: cardhu: add entry for PMIC TPS65911. Tegra30 based platform "cardhu" have the power management IC TPS65911 for the regulator. Adding DT entry for this device. Data are chosen from downstream kernel and making the voltage output as require by default for device to operate. The default interrupt line is HIGH from PMIC device and so inverting the interrupt detection line of PMU interrupt through configuring PMC. In this patch, do not registering LDO5 because the input supply for this rail is different for different version of cardhu i..e A02 and A04. The registration will be done once the dts file for cardhu A02 and A04 are added in follow on patches. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-08-09 11:00:37 +00:00
};
ARM: dt: tegra cardhu: basic audio support Add WM8903 codec nodes, and top-level sound complex node for basic analog audio over headset jack and internal speakers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-27 18:41:37 +00:00
sound {
compatible = "nvidia,tegra-audio-wm8903-cardhu",
"nvidia,tegra-audio-wm8903";
nvidia,model = "NVIDIA Tegra Cardhu";
nvidia,audio-routing =
"Headphone Jack", "HPOUTR",
"Headphone Jack", "HPOUTL",
"Int Spk", "ROP",
"Int Spk", "RON",
"Int Spk", "LOP",
"Int Spk", "LON",
"Mic Jack", "MICBIAS",
"IN1L", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
ARM: tegra: convert device tree files to use GPIO defines Use TEGRA_GPIO() macro to name all GPIOs referenced by GPIO properties, and some interrupts properties. Use standard GPIO flag defines too. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-02-13 00:25:15 +00:00
nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2)
GPIO_ACTIVE_HIGH>;
ARM: tegra: add clocks property to sound nodes Audio-related clocks need to be represented in the device tree. Update bindings to describe which clocks are needed, and DT files to include those clocks. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-26 22:45:52 +00:00
ARM: tegra30: convert device tree files to use CLK defines Use the Tegra30 CAR binding header (tegra30-car.h) to replace magic numbers in the device tree. For example, - clocks = <&tegra_car 28>; + clocks = <&tegra_car CLK_HOST1X>; Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com> [swarren, updated since tegra30-car.h moved for consistency] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-05-22 16:45:34 +00:00
clocks = <&tegra_car TEGRA30_CLK_PLL_A>,
<&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
<&tegra_car TEGRA30_CLK_EXTERN1>;
ARM: tegra: add clocks property to sound nodes Audio-related clocks need to be represented in the device tree. Update bindings to describe which clocks are needed, and DT files to include those clocks. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2013-03-26 22:45:52 +00:00
clock-names = "pll_a", "pll_a_out0", "mclk";
ARM: dt: tegra cardhu: basic audio support Add WM8903 codec nodes, and top-level sound complex node for basic analog audio over headset jack and internal speakers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-27 18:41:37 +00:00
};
ARM: tegra: cardhu: Add power and volume keys The Cardhu has a power key on the top-right as well as volume up and volume down keys on the right side. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-18 13:58:20 +00:00
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
interrupt-parent = <&pmic>;
interrupts = <2 0>;
linux,code = <KEY_POWER>;
debounce-interval = <100>;
ARM: tegra: Replace legacy *,wakeup property with wakeup-source Though the keyboard and other driver will continue to support the legacy "gpio-key,wakeup", "nvidia,wakeup-source" boolean property to enable the wakeup source, "wakeup-source" is the new standard binding. This patch replaces all the legacy wakeup properties with the unified "wakeup-source" property in order to avoid any further copy-paste duplication. Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-tegra@vger.kernel.org Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-02-08 21:55:43 +00:00
wakeup-source;
ARM: tegra: cardhu: Add power and volume keys The Cardhu has a power key on the top-right as well as volume up and volume down keys on the right side. Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-18 13:58:20 +00:00
};
volume-down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
debounce-interval = <10>;
};
volume-up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
debounce-interval = <10>;
};
};
arm/tegra: add support for tegra30 based board cardhu Add support for the tegra30 based cardhu development board. Cardhu is a tablet formfactor reference design for tegra30. The patch provides a device tree for the board, updates Makefile.boot to build the dtb, includes the platform in Kconfig and updates board-dt.c. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-14 15:03:26 +00:00
};
Reference in New Issue Copy Permalink