linux/drivers/net/usb/hso.c

3301 lines
83 KiB
C
Raw Normal View History

/******************************************************************************
*
* Driver for Option High Speed Mobile Devices.
*
* Copyright (C) 2008 Option International
* Filip Aben <f.aben@option.com>
* Denis Joseph Barrow <d.barow@option.com>
* Jan Dumon <j.dumon@option.com>
* Copyright (C) 2007 Andrew Bird (Sphere Systems Ltd)
* <ajb@spheresystems.co.uk>
* Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de>
* Copyright (C) 2008 Novell, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA
*
*
*****************************************************************************/
/******************************************************************************
*
* Description of the device:
*
* Interface 0: Contains the IP network interface on the bulk end points.
* The multiplexed serial ports are using the interrupt and
* control endpoints.
* Interrupt contains a bitmap telling which multiplexed
* serialport needs servicing.
*
* Interface 1: Diagnostics port, uses bulk only, do not submit urbs until the
* port is opened, as this have a huge impact on the network port
* throughput.
*
* Interface 2: Standard modem interface - circuit switched interface, this
* can be used to make a standard ppp connection however it
* should not be used in conjunction with the IP network interface
* enabled for USB performance reasons i.e. if using this set
* ideally disable_net=1.
*
*****************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/sched/signal.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/module.h>
#include <linux/ethtool.h>
#include <linux/usb.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/kmod.h>
#include <linux/rfkill.h>
#include <linux/ip.h>
#include <linux/uaccess.h>
#include <linux/usb/cdc.h>
#include <net/arp.h>
#include <asm/byteorder.h>
#include <linux/serial_core.h>
#include <linux/serial.h>
#define MOD_AUTHOR "Option Wireless"
#define MOD_DESCRIPTION "USB High Speed Option driver"
#define HSO_MAX_NET_DEVICES 10
#define HSO__MAX_MTU 2048
#define DEFAULT_MTU 1500
#define DEFAULT_MRU 1500
#define CTRL_URB_RX_SIZE 1024
#define CTRL_URB_TX_SIZE 64
#define BULK_URB_RX_SIZE 4096
#define BULK_URB_TX_SIZE 8192
#define MUX_BULK_RX_BUF_SIZE HSO__MAX_MTU
#define MUX_BULK_TX_BUF_SIZE HSO__MAX_MTU
#define MUX_BULK_RX_BUF_COUNT 4
#define USB_TYPE_OPTION_VENDOR 0x20
/* These definitions are used with the struct hso_net flags element */
/* - use *_bit operations on it. (bit indices not values.) */
#define HSO_NET_RUNNING 0
#define HSO_NET_TX_TIMEOUT (HZ*10)
#define HSO_SERIAL_MAGIC 0x48534f31
/* Number of ttys to handle */
#define HSO_SERIAL_TTY_MINORS 256
#define MAX_RX_URBS 2
/*****************************************************************************/
/* Debugging functions */
/*****************************************************************************/
#define hso_dbg(lvl, fmt, ...) \
do { \
if ((lvl) & debug) \
pr_info("[%d:%s] " fmt, \
__LINE__, __func__, ##__VA_ARGS__); \
} while (0)
/*****************************************************************************/
/* Enumerators */
/*****************************************************************************/
enum pkt_parse_state {
WAIT_IP,
WAIT_DATA,
WAIT_SYNC
};
/*****************************************************************************/
/* Structs */
/*****************************************************************************/
struct hso_shared_int {
struct usb_endpoint_descriptor *intr_endp;
void *shared_intr_buf;
struct urb *shared_intr_urb;
struct usb_device *usb;
int use_count;
int ref_count;
struct mutex shared_int_lock;
};
struct hso_net {
struct hso_device *parent;
struct net_device *net;
struct rfkill *rfkill;
char name[24];
struct usb_endpoint_descriptor *in_endp;
struct usb_endpoint_descriptor *out_endp;
struct urb *mux_bulk_rx_urb_pool[MUX_BULK_RX_BUF_COUNT];
struct urb *mux_bulk_tx_urb;
void *mux_bulk_rx_buf_pool[MUX_BULK_RX_BUF_COUNT];
void *mux_bulk_tx_buf;
struct sk_buff *skb_rx_buf;
struct sk_buff *skb_tx_buf;
enum pkt_parse_state rx_parse_state;
spinlock_t net_lock;
unsigned short rx_buf_size;
unsigned short rx_buf_missing;
struct iphdr rx_ip_hdr;
unsigned long flags;
};
enum rx_ctrl_state{
RX_IDLE,
RX_SENT,
RX_PENDING
};
#define BM_REQUEST_TYPE (0xa1)
#define B_NOTIFICATION (0x20)
#define W_VALUE (0x0)
#define W_LENGTH (0x2)
#define B_OVERRUN (0x1<<6)
#define B_PARITY (0x1<<5)
#define B_FRAMING (0x1<<4)
#define B_RING_SIGNAL (0x1<<3)
#define B_BREAK (0x1<<2)
#define B_TX_CARRIER (0x1<<1)
#define B_RX_CARRIER (0x1<<0)
struct hso_serial_state_notification {
u8 bmRequestType;
u8 bNotification;
u16 wValue;
u16 wIndex;
u16 wLength;
u16 UART_state_bitmap;
} __packed;
struct hso_tiocmget {
struct mutex mutex;
wait_queue_head_t waitq;
int intr_completed;
struct usb_endpoint_descriptor *endp;
struct urb *urb;
struct hso_serial_state_notification serial_state_notification;
u16 prev_UART_state_bitmap;
struct uart_icount icount;
};
struct hso_serial {
struct hso_device *parent;
int magic;
u8 minor;
struct hso_shared_int *shared_int;
/* rx/tx urb could be either a bulk urb or a control urb depending
on which serial port it is used on. */
struct urb *rx_urb[MAX_RX_URBS];
u8 num_rx_urbs;
u8 *rx_data[MAX_RX_URBS];
u16 rx_data_length; /* should contain allocated length */
struct urb *tx_urb;
u8 *tx_data;
u8 *tx_buffer;
u16 tx_data_length; /* should contain allocated length */
u16 tx_data_count;
u16 tx_buffer_count;
struct usb_ctrlrequest ctrl_req_tx;
struct usb_ctrlrequest ctrl_req_rx;
struct usb_endpoint_descriptor *in_endp;
struct usb_endpoint_descriptor *out_endp;
enum rx_ctrl_state rx_state;
u8 rts_state;
u8 dtr_state;
unsigned tx_urb_used:1;
struct tty_port port;
/* from usb_serial_port */
spinlock_t serial_lock;
int (*write_data) (struct hso_serial *serial);
struct hso_tiocmget *tiocmget;
/* Hacks required to get flow control
* working on the serial receive buffers
* so as not to drop characters on the floor.
*/
int curr_rx_urb_idx;
u8 rx_urb_filled[MAX_RX_URBS];
struct tasklet_struct unthrottle_tasklet;
};
struct hso_device {
union {
struct hso_serial *dev_serial;
struct hso_net *dev_net;
} port_data;
u32 port_spec;
u8 is_active;
u8 usb_gone;
struct work_struct async_get_intf;
struct work_struct async_put_intf;
struct usb_device *usb;
struct usb_interface *interface;
struct device *dev;
struct kref ref;
struct mutex mutex;
};
/* Type of interface */
#define HSO_INTF_MASK 0xFF00
#define HSO_INTF_MUX 0x0100
#define HSO_INTF_BULK 0x0200
/* Type of port */
#define HSO_PORT_MASK 0xFF
#define HSO_PORT_NO_PORT 0x0
#define HSO_PORT_CONTROL 0x1
#define HSO_PORT_APP 0x2
#define HSO_PORT_GPS 0x3
#define HSO_PORT_PCSC 0x4
#define HSO_PORT_APP2 0x5
#define HSO_PORT_GPS_CONTROL 0x6
#define HSO_PORT_MSD 0x7
#define HSO_PORT_VOICE 0x8
#define HSO_PORT_DIAG2 0x9
#define HSO_PORT_DIAG 0x10
#define HSO_PORT_MODEM 0x11
#define HSO_PORT_NETWORK 0x12
/* Additional device info */
#define HSO_INFO_MASK 0xFF000000
#define HSO_INFO_CRC_BUG 0x01000000
/*****************************************************************************/
/* Prototypes */
/*****************************************************************************/
/* Serial driver functions */
static int hso_serial_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear);
static void ctrl_callback(struct urb *urb);
static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial);
static void hso_kick_transmit(struct hso_serial *serial);
/* Helper functions */
static int hso_mux_submit_intr_urb(struct hso_shared_int *mux_int,
struct usb_device *usb, gfp_t gfp);
static void handle_usb_error(int status, const char *function,
struct hso_device *hso_dev);
static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
int type, int dir);
static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports);
static void hso_free_interface(struct usb_interface *intf);
static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags);
static int hso_stop_serial_device(struct hso_device *hso_dev);
static int hso_start_net_device(struct hso_device *hso_dev);
static void hso_free_shared_int(struct hso_shared_int *shared_int);
static int hso_stop_net_device(struct hso_device *hso_dev);
static void hso_serial_ref_free(struct kref *ref);
static void hso_std_serial_read_bulk_callback(struct urb *urb);
static int hso_mux_serial_read(struct hso_serial *serial);
static void async_get_intf(struct work_struct *data);
static void async_put_intf(struct work_struct *data);
static int hso_put_activity(struct hso_device *hso_dev);
static int hso_get_activity(struct hso_device *hso_dev);
static void tiocmget_intr_callback(struct urb *urb);
/*****************************************************************************/
/* Helping functions */
/*****************************************************************************/
/* #define DEBUG */
static inline struct hso_net *dev2net(struct hso_device *hso_dev)
{
return hso_dev->port_data.dev_net;
}
static inline struct hso_serial *dev2ser(struct hso_device *hso_dev)
{
return hso_dev->port_data.dev_serial;
}
/* Debugging functions */
#ifdef DEBUG
static void dbg_dump(int line_count, const char *func_name, unsigned char *buf,
unsigned int len)
{
static char name[255];
sprintf(name, "hso[%d:%s]", line_count, func_name);
print_hex_dump_bytes(name, DUMP_PREFIX_NONE, buf, len);
}
#define DUMP(buf_, len_) \
dbg_dump(__LINE__, __func__, (unsigned char *)buf_, len_)
#define DUMP1(buf_, len_) \
do { \
if (0x01 & debug) \
DUMP(buf_, len_); \
} while (0)
#else
#define DUMP(buf_, len_)
#define DUMP1(buf_, len_)
#endif
/* module parameters */
static int debug;
static int tty_major;
static int disable_net;
/* driver info */
static const char driver_name[] = "hso";
static const char tty_filename[] = "ttyHS";
static const char *version = __FILE__ ": " MOD_AUTHOR;
/* the usb driver itself (registered in hso_init) */
static struct usb_driver hso_driver;
/* serial structures */
static struct tty_driver *tty_drv;
static struct hso_device *serial_table[HSO_SERIAL_TTY_MINORS];
static struct hso_device *network_table[HSO_MAX_NET_DEVICES];
static spinlock_t serial_table_lock;
static const s32 default_port_spec[] = {
HSO_INTF_MUX | HSO_PORT_NETWORK,
HSO_INTF_BULK | HSO_PORT_DIAG,
HSO_INTF_BULK | HSO_PORT_MODEM,
0
};
static const s32 icon321_port_spec[] = {
HSO_INTF_MUX | HSO_PORT_NETWORK,
HSO_INTF_BULK | HSO_PORT_DIAG2,
HSO_INTF_BULK | HSO_PORT_MODEM,
HSO_INTF_BULK | HSO_PORT_DIAG,
0
};
#define default_port_device(vendor, product) \
USB_DEVICE(vendor, product), \
.driver_info = (kernel_ulong_t)default_port_spec
#define icon321_port_device(vendor, product) \
USB_DEVICE(vendor, product), \
.driver_info = (kernel_ulong_t)icon321_port_spec
/* list of devices we support */
static const struct usb_device_id hso_ids[] = {
{default_port_device(0x0af0, 0x6711)},
{default_port_device(0x0af0, 0x6731)},
{default_port_device(0x0af0, 0x6751)},
{default_port_device(0x0af0, 0x6771)},
{default_port_device(0x0af0, 0x6791)},
{default_port_device(0x0af0, 0x6811)},
{default_port_device(0x0af0, 0x6911)},
{default_port_device(0x0af0, 0x6951)},
{default_port_device(0x0af0, 0x6971)},
{default_port_device(0x0af0, 0x7011)},
{default_port_device(0x0af0, 0x7031)},
{default_port_device(0x0af0, 0x7051)},
{default_port_device(0x0af0, 0x7071)},
{default_port_device(0x0af0, 0x7111)},
{default_port_device(0x0af0, 0x7211)},
{default_port_device(0x0af0, 0x7251)},
{default_port_device(0x0af0, 0x7271)},
{default_port_device(0x0af0, 0x7311)},
{default_port_device(0x0af0, 0xc031)}, /* Icon-Edge */
{icon321_port_device(0x0af0, 0xd013)}, /* Module HSxPA */
{icon321_port_device(0x0af0, 0xd031)}, /* Icon-321 */
{icon321_port_device(0x0af0, 0xd033)}, /* Icon-322 */
{USB_DEVICE(0x0af0, 0x7301)}, /* GE40x */
{USB_DEVICE(0x0af0, 0x7361)}, /* GE40x */
{USB_DEVICE(0x0af0, 0x7381)}, /* GE40x */
{USB_DEVICE(0x0af0, 0x7401)}, /* GI 0401 */
{USB_DEVICE(0x0af0, 0x7501)}, /* GTM 382 */
{USB_DEVICE(0x0af0, 0x7601)}, /* GE40x */
{USB_DEVICE(0x0af0, 0x7701)},
{USB_DEVICE(0x0af0, 0x7706)},
{USB_DEVICE(0x0af0, 0x7801)},
{USB_DEVICE(0x0af0, 0x7901)},
{USB_DEVICE(0x0af0, 0x7A01)},
{USB_DEVICE(0x0af0, 0x7A05)},
{USB_DEVICE(0x0af0, 0x8200)},
{USB_DEVICE(0x0af0, 0x8201)},
{USB_DEVICE(0x0af0, 0x8300)},
{USB_DEVICE(0x0af0, 0x8302)},
{USB_DEVICE(0x0af0, 0x8304)},
{USB_DEVICE(0x0af0, 0x8400)},
{USB_DEVICE(0x0af0, 0x8600)},
{USB_DEVICE(0x0af0, 0x8800)},
{USB_DEVICE(0x0af0, 0x8900)},
{USB_DEVICE(0x0af0, 0x9000)},
net/usb/hso: Add support for Option GTM671WFS After this patch: [ 32.985530] hso: drivers/net/usb/hso.c: Option Wireless [ 33.000452] hso 2-1.4:1.7: Not our interface [ 33.001849] usbcore: registered new interface driver hso root@qt5022:~# ls /dev/ttyHS* /dev/ttyHS0 /dev/ttyHS1 /dev/ttyHS2 /dev/ttyHS3 /dev/ttyHS4 /dev/ttyHS5 root@qt5022:~# lsusb -d 0af0: -vvv Bus 002 Device 003: ID 0af0:9200 Option Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 idVendor 0x0af0 Option idProduct 0x9200 bcdDevice 0.00 iManufacturer 3 Option N.V. iProduct 2 Globetrotter HSUPA Modem iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 200 bNumInterfaces 8 bConfigurationValue 1 iConfiguration 1 Option Configuration bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 2 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x03 EP 3 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 3 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x84 EP 4 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x04 EP 4 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 4 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x85 EP 5 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x05 EP 5 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 5 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x06 EP 6 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 6 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 5 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 32 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 7 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x08 EP 8 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 1 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 255 Vendor Specific Class bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-04 09:11:49 +00:00
{USB_DEVICE(0x0af0, 0x9200)}, /* Option GTM671WFS */
{USB_DEVICE(0x0af0, 0xd035)},
{USB_DEVICE(0x0af0, 0xd055)},
{USB_DEVICE(0x0af0, 0xd155)},
{USB_DEVICE(0x0af0, 0xd255)},
{USB_DEVICE(0x0af0, 0xd057)},
{USB_DEVICE(0x0af0, 0xd157)},
{USB_DEVICE(0x0af0, 0xd257)},
{USB_DEVICE(0x0af0, 0xd357)},
{USB_DEVICE(0x0af0, 0xd058)},
{USB_DEVICE(0x0af0, 0xc100)},
{}
};
MODULE_DEVICE_TABLE(usb, hso_ids);
/* Sysfs attribute */
static ssize_t hso_sysfs_show_porttype(struct device *dev,
struct device_attribute *attr,
char *buf)
{
struct hso_device *hso_dev = dev_get_drvdata(dev);
char *port_name;
if (!hso_dev)
return 0;
switch (hso_dev->port_spec & HSO_PORT_MASK) {
case HSO_PORT_CONTROL:
port_name = "Control";
break;
case HSO_PORT_APP:
port_name = "Application";
break;
case HSO_PORT_APP2:
port_name = "Application2";
break;
case HSO_PORT_GPS:
port_name = "GPS";
break;
case HSO_PORT_GPS_CONTROL:
port_name = "GPS Control";
break;
case HSO_PORT_PCSC:
port_name = "PCSC";
break;
case HSO_PORT_DIAG:
port_name = "Diagnostic";
break;
case HSO_PORT_DIAG2:
port_name = "Diagnostic2";
break;
case HSO_PORT_MODEM:
port_name = "Modem";
break;
case HSO_PORT_NETWORK:
port_name = "Network";
break;
default:
port_name = "Unknown";
break;
}
return sprintf(buf, "%s\n", port_name);
}
static DEVICE_ATTR(hsotype, S_IRUGO, hso_sysfs_show_porttype, NULL);
static struct attribute *hso_serial_dev_attrs[] = {
&dev_attr_hsotype.attr,
NULL
};
ATTRIBUTE_GROUPS(hso_serial_dev);
static int hso_urb_to_index(struct hso_serial *serial, struct urb *urb)
{
int idx;
for (idx = 0; idx < serial->num_rx_urbs; idx++)
if (serial->rx_urb[idx] == urb)
return idx;
dev_err(serial->parent->dev, "hso_urb_to_index failed\n");
return -1;
}
/* converts mux value to a port spec value */
static u32 hso_mux_to_port(int mux)
{
u32 result;
switch (mux) {
case 0x1:
result = HSO_PORT_CONTROL;
break;
case 0x2:
result = HSO_PORT_APP;
break;
case 0x4:
result = HSO_PORT_PCSC;
break;
case 0x8:
result = HSO_PORT_GPS;
break;
case 0x10:
result = HSO_PORT_APP2;
break;
default:
result = HSO_PORT_NO_PORT;
}
return result;
}
/* converts port spec value to a mux value */
static u32 hso_port_to_mux(int port)
{
u32 result;
switch (port & HSO_PORT_MASK) {
case HSO_PORT_CONTROL:
result = 0x0;
break;
case HSO_PORT_APP:
result = 0x1;
break;
case HSO_PORT_PCSC:
result = 0x2;
break;
case HSO_PORT_GPS:
result = 0x3;
break;
case HSO_PORT_APP2:
result = 0x4;
break;
default:
result = 0x0;
}
return result;
}
static struct hso_serial *get_serial_by_shared_int_and_type(
struct hso_shared_int *shared_int,
int mux)
{
int i, port;
port = hso_mux_to_port(mux);
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
if (serial_table[i] &&
(dev2ser(serial_table[i])->shared_int == shared_int) &&
((serial_table[i]->port_spec & HSO_PORT_MASK) == port)) {
return dev2ser(serial_table[i]);
}
}
return NULL;
}
static struct hso_serial *get_serial_by_index(unsigned index)
{
struct hso_serial *serial = NULL;
unsigned long flags;
spin_lock_irqsave(&serial_table_lock, flags);
if (serial_table[index])
serial = dev2ser(serial_table[index]);
spin_unlock_irqrestore(&serial_table_lock, flags);
return serial;
}
static int get_free_serial_index(void)
{
int index;
unsigned long flags;
spin_lock_irqsave(&serial_table_lock, flags);
for (index = 0; index < HSO_SERIAL_TTY_MINORS; index++) {
if (serial_table[index] == NULL) {
spin_unlock_irqrestore(&serial_table_lock, flags);
return index;
}
}
spin_unlock_irqrestore(&serial_table_lock, flags);
pr_err("%s: no free serial devices in table\n", __func__);
return -1;
}
static void set_serial_by_index(unsigned index, struct hso_serial *serial)
{
unsigned long flags;
spin_lock_irqsave(&serial_table_lock, flags);
if (serial)
serial_table[index] = serial->parent;
else
serial_table[index] = NULL;
spin_unlock_irqrestore(&serial_table_lock, flags);
}
static void handle_usb_error(int status, const char *function,
struct hso_device *hso_dev)
{
char *explanation;
switch (status) {
case -ENODEV:
explanation = "no device";
break;
case -ENOENT:
explanation = "endpoint not enabled";
break;
case -EPIPE:
explanation = "endpoint stalled";
break;
case -ENOSPC:
explanation = "not enough bandwidth";
break;
case -ESHUTDOWN:
explanation = "device disabled";
break;
case -EHOSTUNREACH:
explanation = "device suspended";
break;
case -EINVAL:
case -EAGAIN:
case -EFBIG:
case -EMSGSIZE:
explanation = "internal error";
break;
case -EILSEQ:
case -EPROTO:
case -ETIME:
case -ETIMEDOUT:
explanation = "protocol error";
if (hso_dev)
usb_queue_reset_device(hso_dev->interface);
break;
default:
explanation = "unknown status";
break;
}
/* log a meaningful explanation of an USB status */
hso_dbg(0x1, "%s: received USB status - %s (%d)\n",
function, explanation, status);
}
/* Network interface functions */
/* called when net interface is brought up by ifconfig */
static int hso_net_open(struct net_device *net)
{
struct hso_net *odev = netdev_priv(net);
unsigned long flags = 0;
if (!odev) {
dev_err(&net->dev, "No net device !\n");
return -ENODEV;
}
odev->skb_tx_buf = NULL;
/* setup environment */
spin_lock_irqsave(&odev->net_lock, flags);
odev->rx_parse_state = WAIT_IP;
odev->rx_buf_size = 0;
odev->rx_buf_missing = sizeof(struct iphdr);
spin_unlock_irqrestore(&odev->net_lock, flags);
/* We are up and running. */
set_bit(HSO_NET_RUNNING, &odev->flags);
hso_start_net_device(odev->parent);
/* Tell the kernel we are ready to start receiving from it */
netif_start_queue(net);
return 0;
}
/* called when interface is brought down by ifconfig */
static int hso_net_close(struct net_device *net)
{
struct hso_net *odev = netdev_priv(net);
/* we don't need the queue anymore */
netif_stop_queue(net);
/* no longer running */
clear_bit(HSO_NET_RUNNING, &odev->flags);
hso_stop_net_device(odev->parent);
/* done */
return 0;
}
/* USB tells is xmit done, we should start the netqueue again */
static void write_bulk_callback(struct urb *urb)
{
struct hso_net *odev = urb->context;
int status = urb->status;
/* Sanity check */
if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
dev_err(&urb->dev->dev, "%s: device not running\n", __func__);
return;
}
/* Do we still have a valid kernel network device? */
if (!netif_device_present(odev->net)) {
dev_err(&urb->dev->dev, "%s: net device not present\n",
__func__);
return;
}
/* log status, but don't act on it, we don't need to resubmit anything
* anyhow */
if (status)
handle_usb_error(status, __func__, odev->parent);
hso_put_activity(odev->parent);
/* Tell the network interface we are ready for another frame */
netif_wake_queue(odev->net);
}
/* called by kernel when we need to transmit a packet */
static netdev_tx_t hso_net_start_xmit(struct sk_buff *skb,
struct net_device *net)
{
struct hso_net *odev = netdev_priv(net);
int result;
/* Tell the kernel, "No more frames 'til we are done with this one." */
netif_stop_queue(net);
if (hso_get_activity(odev->parent) == -EAGAIN) {
odev->skb_tx_buf = skb;
return NETDEV_TX_OK;
}
/* log if asked */
DUMP1(skb->data, skb->len);
/* Copy it from kernel memory to OUR memory */
memcpy(odev->mux_bulk_tx_buf, skb->data, skb->len);
hso_dbg(0x1, "len: %d/%d\n", skb->len, MUX_BULK_TX_BUF_SIZE);
/* Fill in the URB for shipping it out. */
usb_fill_bulk_urb(odev->mux_bulk_tx_urb,
odev->parent->usb,
usb_sndbulkpipe(odev->parent->usb,
odev->out_endp->
bEndpointAddress & 0x7F),
odev->mux_bulk_tx_buf, skb->len, write_bulk_callback,
odev);
/* Deal with the Zero Length packet problem, I hope */
odev->mux_bulk_tx_urb->transfer_flags |= URB_ZERO_PACKET;
/* Send the URB on its merry way. */
result = usb_submit_urb(odev->mux_bulk_tx_urb, GFP_ATOMIC);
if (result) {
dev_warn(&odev->parent->interface->dev,
"failed mux_bulk_tx_urb %d\n", result);
net->stats.tx_errors++;
netif_start_queue(net);
} else {
net->stats.tx_packets++;
net->stats.tx_bytes += skb->len;
}
dev_kfree_skb(skb);
/* we're done */
return NETDEV_TX_OK;
}
static const struct ethtool_ops ops = {
.get_link = ethtool_op_get_link
};
/* called when a packet did not ack after watchdogtimeout */
static void hso_net_tx_timeout(struct net_device *net)
{
struct hso_net *odev = netdev_priv(net);
if (!odev)
return;
/* Tell syslog we are hosed. */
dev_warn(&net->dev, "Tx timed out.\n");
/* Tear the waiting frame off the list */
if (odev->mux_bulk_tx_urb &&
(odev->mux_bulk_tx_urb->status == -EINPROGRESS))
usb_unlink_urb(odev->mux_bulk_tx_urb);
/* Update statistics */
net->stats.tx_errors++;
}
/* make a real packet from the received USB buffer */
static void packetizeRx(struct hso_net *odev, unsigned char *ip_pkt,
unsigned int count, unsigned char is_eop)
{
unsigned short temp_bytes;
unsigned short buffer_offset = 0;
unsigned short frame_len;
/* log if needed */
hso_dbg(0x1, "Rx %d bytes\n", count);
DUMP(ip_pkt, min(128, (int)count));
while (count) {
switch (odev->rx_parse_state) {
case WAIT_IP:
/* waiting for IP header. */
/* wanted bytes - size of ip header */
temp_bytes =
(count <
odev->rx_buf_missing) ? count : odev->
rx_buf_missing;
memcpy(((unsigned char *)(&odev->rx_ip_hdr)) +
odev->rx_buf_size, ip_pkt + buffer_offset,
temp_bytes);
odev->rx_buf_size += temp_bytes;
buffer_offset += temp_bytes;
odev->rx_buf_missing -= temp_bytes;
count -= temp_bytes;
if (!odev->rx_buf_missing) {
/* header is complete allocate an sk_buffer and
* continue to WAIT_DATA */
frame_len = ntohs(odev->rx_ip_hdr.tot_len);
if ((frame_len > DEFAULT_MRU) ||
(frame_len < sizeof(struct iphdr))) {
dev_err(&odev->net->dev,
"Invalid frame (%d) length\n",
frame_len);
odev->rx_parse_state = WAIT_SYNC;
continue;
}
/* Allocate an sk_buff */
odev->skb_rx_buf = netdev_alloc_skb(odev->net,
frame_len);
if (!odev->skb_rx_buf) {
/* We got no receive buffer. */
hso_dbg(0x1, "could not allocate memory\n");
odev->rx_parse_state = WAIT_SYNC;
continue;
}
/* Copy what we got so far. make room for iphdr
* after tail. */
skb_put_data(odev->skb_rx_buf,
(char *)&(odev->rx_ip_hdr),
sizeof(struct iphdr));
/* ETH_HLEN */
odev->rx_buf_size = sizeof(struct iphdr);
/* Filip actually use .tot_len */
odev->rx_buf_missing =
frame_len - sizeof(struct iphdr);
odev->rx_parse_state = WAIT_DATA;
}
break;
case WAIT_DATA:
temp_bytes = (count < odev->rx_buf_missing)
? count : odev->rx_buf_missing;
/* Copy the rest of the bytes that are left in the
* buffer into the waiting sk_buf. */
/* Make room for temp_bytes after tail. */
skb_put_data(odev->skb_rx_buf,
ip_pkt + buffer_offset,
temp_bytes);
odev->rx_buf_missing -= temp_bytes;
count -= temp_bytes;
buffer_offset += temp_bytes;
odev->rx_buf_size += temp_bytes;
if (!odev->rx_buf_missing) {
/* Packet is complete. Inject into stack. */
/* We have IP packet here */
odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
skb_reset_mac_header(odev->skb_rx_buf);
/* Ship it off to the kernel */
netif_rx(odev->skb_rx_buf);
/* No longer our buffer. */
odev->skb_rx_buf = NULL;
/* update out statistics */
odev->net->stats.rx_packets++;
odev->net->stats.rx_bytes += odev->rx_buf_size;
odev->rx_buf_size = 0;
odev->rx_buf_missing = sizeof(struct iphdr);
odev->rx_parse_state = WAIT_IP;
}
break;
case WAIT_SYNC:
hso_dbg(0x1, " W_S\n");
count = 0;
break;
default:
hso_dbg(0x1, "\n");
count--;
break;
}
}
/* Recovery mechanism for WAIT_SYNC state. */
if (is_eop) {
if (odev->rx_parse_state == WAIT_SYNC) {
odev->rx_parse_state = WAIT_IP;
odev->rx_buf_size = 0;
odev->rx_buf_missing = sizeof(struct iphdr);
}
}
}
static void fix_crc_bug(struct urb *urb, __le16 max_packet_size)
{
static const u8 crc_check[4] = { 0xDE, 0xAD, 0xBE, 0xEF };
u32 rest = urb->actual_length % le16_to_cpu(max_packet_size);
if (((rest == 5) || (rest == 6)) &&
!memcmp(((u8 *)urb->transfer_buffer) + urb->actual_length - 4,
crc_check, 4)) {
urb->actual_length -= 4;
}
}
/* Moving data from usb to kernel (in interrupt state) */
static void read_bulk_callback(struct urb *urb)
{
struct hso_net *odev = urb->context;
struct net_device *net;
int result;
int status = urb->status;
/* is al ok? (Filip: Who's Al ?) */
if (status) {
handle_usb_error(status, __func__, odev->parent);
return;
}
/* Sanity check */
if (!odev || !test_bit(HSO_NET_RUNNING, &odev->flags)) {
hso_dbg(0x1, "BULK IN callback but driver is not active!\n");
return;
}
usb_mark_last_busy(urb->dev);
net = odev->net;
if (!netif_device_present(net)) {
/* Somebody killed our network interface... */
return;
}
if (odev->parent->port_spec & HSO_INFO_CRC_BUG)
fix_crc_bug(urb, odev->in_endp->wMaxPacketSize);
/* do we even have a packet? */
if (urb->actual_length) {
/* Handle the IP stream, add header and push it onto network
* stack if the packet is complete. */
spin_lock(&odev->net_lock);
packetizeRx(odev, urb->transfer_buffer, urb->actual_length,
(urb->transfer_buffer_length >
urb->actual_length) ? 1 : 0);
spin_unlock(&odev->net_lock);
}
/* We are done with this URB, resubmit it. Prep the USB to wait for
* another frame. Reuse same as received. */
usb_fill_bulk_urb(urb,
odev->parent->usb,
usb_rcvbulkpipe(odev->parent->usb,
odev->in_endp->
bEndpointAddress & 0x7F),
urb->transfer_buffer, MUX_BULK_RX_BUF_SIZE,
read_bulk_callback, odev);
/* Give this to the USB subsystem so it can tell us when more data
* arrives. */
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result)
dev_warn(&odev->parent->interface->dev,
"%s failed submit mux_bulk_rx_urb %d\n", __func__,
result);
}
/* Serial driver functions */
static void hso_init_termios(struct ktermios *termios)
{
/*
* The default requirements for this device are:
*/
termios->c_iflag &=
~(IGNBRK /* disable ignore break */
| BRKINT /* disable break causes interrupt */
| PARMRK /* disable mark parity errors */
| ISTRIP /* disable clear high bit of input characters */
| INLCR /* disable translate NL to CR */
| IGNCR /* disable ignore CR */
| ICRNL /* disable translate CR to NL */
| IXON); /* disable enable XON/XOFF flow control */
/* disable postprocess output characters */
termios->c_oflag &= ~OPOST;
termios->c_lflag &=
~(ECHO /* disable echo input characters */
| ECHONL /* disable echo new line */
| ICANON /* disable erase, kill, werase, and rprnt
special characters */
| ISIG /* disable interrupt, quit, and suspend special
characters */
| IEXTEN); /* disable non-POSIX special characters */
termios->c_cflag &=
~(CSIZE /* no size */
| PARENB /* disable parity bit */
| CBAUD /* clear current baud rate */
| CBAUDEX); /* clear current buad rate */
termios->c_cflag |= CS8; /* character size 8 bits */
/* baud rate 115200 */
tty_termios_encode_baud_rate(termios, 115200, 115200);
}
static void _hso_serial_set_termios(struct tty_struct *tty,
struct ktermios *old)
{
struct hso_serial *serial = tty->driver_data;
if (!serial) {
pr_err("%s: no tty structures", __func__);
return;
}
hso_dbg(0x8, "port %d\n", serial->minor);
/*
* Fix up unsupported bits
*/
tty->termios.c_iflag &= ~IXON; /* disable enable XON/XOFF flow control */
tty->termios.c_cflag &=
~(CSIZE /* no size */
| PARENB /* disable parity bit */
| CBAUD /* clear current baud rate */
| CBAUDEX); /* clear current buad rate */
tty->termios.c_cflag |= CS8; /* character size 8 bits */
/* baud rate 115200 */
tty_encode_baud_rate(tty, 115200, 115200);
}
static void hso_resubmit_rx_bulk_urb(struct hso_serial *serial, struct urb *urb)
{
int result;
/* We are done with this URB, resubmit it. Prep the USB to wait for
* another frame */
usb_fill_bulk_urb(urb, serial->parent->usb,
usb_rcvbulkpipe(serial->parent->usb,
serial->in_endp->
bEndpointAddress & 0x7F),
urb->transfer_buffer, serial->rx_data_length,
hso_std_serial_read_bulk_callback, serial);
/* Give this to the USB subsystem so it can tell us when more data
* arrives. */
result = usb_submit_urb(urb, GFP_ATOMIC);
if (result) {
dev_err(&urb->dev->dev, "%s failed submit serial rx_urb %d\n",
__func__, result);
}
}
static void put_rxbuf_data_and_resubmit_bulk_urb(struct hso_serial *serial)
{
int count;
struct urb *curr_urb;
while (serial->rx_urb_filled[serial->curr_rx_urb_idx]) {
curr_urb = serial->rx_urb[serial->curr_rx_urb_idx];
count = put_rxbuf_data(curr_urb, serial);
if (count == -1)
return;
if (count == 0) {
serial->curr_rx_urb_idx++;
if (serial->curr_rx_urb_idx >= serial->num_rx_urbs)
serial->curr_rx_urb_idx = 0;
hso_resubmit_rx_bulk_urb(serial, curr_urb);
}
}
}
static void put_rxbuf_data_and_resubmit_ctrl_urb(struct hso_serial *serial)
{
int count = 0;
struct urb *urb;
urb = serial->rx_urb[0];
if (serial->port.count > 0) {
count = put_rxbuf_data(urb, serial);
if (count == -1)
return;
}
/* Re issue a read as long as we receive data. */
if (count == 0 && ((urb->actual_length != 0) ||
(serial->rx_state == RX_PENDING))) {
serial->rx_state = RX_SENT;
hso_mux_serial_read(serial);
} else
serial->rx_state = RX_IDLE;
}
/* read callback for Diag and CS port */
static void hso_std_serial_read_bulk_callback(struct urb *urb)
{
struct hso_serial *serial = urb->context;
int status = urb->status;
hso_dbg(0x8, "--- Got serial_read_bulk callback %02x ---\n", status);
/* sanity check */
if (!serial) {
hso_dbg(0x1, "serial == NULL\n");
return;
}
if (status) {
handle_usb_error(status, __func__, serial->parent);
return;
}
hso_dbg(0x1, "Actual length = %d\n", urb->actual_length);
DUMP1(urb->transfer_buffer, urb->actual_length);
/* Anyone listening? */
if (serial->port.count == 0)
return;
if (serial->parent->port_spec & HSO_INFO_CRC_BUG)
fix_crc_bug(urb, serial->in_endp->wMaxPacketSize);
/* Valid data, handle RX data */
spin_lock(&serial->serial_lock);
serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1;
put_rxbuf_data_and_resubmit_bulk_urb(serial);
spin_unlock(&serial->serial_lock);
}
/*
* This needs to be a tasklet otherwise we will
* end up recursively calling this function.
*/
static void hso_unthrottle_tasklet(struct hso_serial *serial)
{
unsigned long flags;
spin_lock_irqsave(&serial->serial_lock, flags);
if ((serial->parent->port_spec & HSO_INTF_MUX))
put_rxbuf_data_and_resubmit_ctrl_urb(serial);
else
put_rxbuf_data_and_resubmit_bulk_urb(serial);
spin_unlock_irqrestore(&serial->serial_lock, flags);
}
static void hso_unthrottle(struct tty_struct *tty)
{
struct hso_serial *serial = tty->driver_data;
tasklet_hi_schedule(&serial->unthrottle_tasklet);
}
/* open the requested serial port */
static int hso_serial_open(struct tty_struct *tty, struct file *filp)
{
struct hso_serial *serial = get_serial_by_index(tty->index);
int result;
/* sanity check */
if (serial == NULL || serial->magic != HSO_SERIAL_MAGIC) {
WARN_ON(1);
tty->driver_data = NULL;
hso_dbg(0x1, "Failed to open port\n");
return -ENODEV;
}
mutex_lock(&serial->parent->mutex);
result = usb_autopm_get_interface(serial->parent->interface);
if (result < 0)
goto err_out;
hso_dbg(0x1, "Opening %d\n", serial->minor);
/* setup */
tty->driver_data = serial;
tty_port_tty_set(&serial->port, tty);
/* check for port already opened, if not set the termios */
serial->port.count++;
if (serial->port.count == 1) {
serial->rx_state = RX_IDLE;
/* Force default termio settings */
_hso_serial_set_termios(tty, NULL);
tasklet_init(&serial->unthrottle_tasklet,
(void (*)(unsigned long))hso_unthrottle_tasklet,
(unsigned long)serial);
result = hso_start_serial_device(serial->parent, GFP_KERNEL);
if (result) {
hso_stop_serial_device(serial->parent);
serial->port.count--;
} else {
kref_get(&serial->parent->ref);
}
} else {
hso_dbg(0x1, "Port was already open\n");
}
usb_autopm_put_interface(serial->parent->interface);
/* done */
if (result)
hso_serial_tiocmset(tty, TIOCM_RTS | TIOCM_DTR, 0);
err_out:
mutex_unlock(&serial->parent->mutex);
return result;
}
/* close the requested serial port */
static void hso_serial_close(struct tty_struct *tty, struct file *filp)
{
struct hso_serial *serial = tty->driver_data;
u8 usb_gone;
hso_dbg(0x1, "Closing serial port\n");
/* Open failed, no close cleanup required */
if (serial == NULL)
return;
mutex_lock(&serial->parent->mutex);
usb_gone = serial->parent->usb_gone;
if (!usb_gone)
usb_autopm_get_interface(serial->parent->interface);
/* reset the rts and dtr */
/* do the actual close */
serial->port.count--;
if (serial->port.count <= 0) {
serial->port.count = 0;
tty_port_tty_set(&serial->port, NULL);
if (!usb_gone)
hso_stop_serial_device(serial->parent);
tasklet_kill(&serial->unthrottle_tasklet);
}
if (!usb_gone)
usb_autopm_put_interface(serial->parent->interface);
mutex_unlock(&serial->parent->mutex);
}
/* close the requested serial port */
static int hso_serial_write(struct tty_struct *tty, const unsigned char *buf,
int count)
{
struct hso_serial *serial = tty->driver_data;
int space, tx_bytes;
unsigned long flags;
/* sanity check */
if (serial == NULL) {
pr_err("%s: serial is NULL\n", __func__);
return -ENODEV;
}
spin_lock_irqsave(&serial->serial_lock, flags);
space = serial->tx_data_length - serial->tx_buffer_count;
tx_bytes = (count < space) ? count : space;
if (!tx_bytes)
goto out;
memcpy(serial->tx_buffer + serial->tx_buffer_count, buf, tx_bytes);
serial->tx_buffer_count += tx_bytes;
out:
spin_unlock_irqrestore(&serial->serial_lock, flags);
hso_kick_transmit(serial);
/* done */
return tx_bytes;
}
/* how much room is there for writing */
static int hso_serial_write_room(struct tty_struct *tty)
{
struct hso_serial *serial = tty->driver_data;
int room;
unsigned long flags;
spin_lock_irqsave(&serial->serial_lock, flags);
room = serial->tx_data_length - serial->tx_buffer_count;
spin_unlock_irqrestore(&serial->serial_lock, flags);
/* return free room */
return room;
}
static void hso_serial_cleanup(struct tty_struct *tty)
{
struct hso_serial *serial = tty->driver_data;
if (!serial)
return;
kref_put(&serial->parent->ref, hso_serial_ref_free);
}
/* setup the term */
static void hso_serial_set_termios(struct tty_struct *tty, struct ktermios *old)
{
struct hso_serial *serial = tty->driver_data;
unsigned long flags;
if (old)
hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n",
tty->termios.c_cflag, old->c_cflag);
/* the actual setup */
spin_lock_irqsave(&serial->serial_lock, flags);
if (serial->port.count)
_hso_serial_set_termios(tty, old);
else
tty->termios = *old;
spin_unlock_irqrestore(&serial->serial_lock, flags);
/* done */
}
/* how many characters in the buffer */
static int hso_serial_chars_in_buffer(struct tty_struct *tty)
{
struct hso_serial *serial = tty->driver_data;
int chars;
unsigned long flags;
/* sanity check */
if (serial == NULL)
return 0;
spin_lock_irqsave(&serial->serial_lock, flags);
chars = serial->tx_buffer_count;
spin_unlock_irqrestore(&serial->serial_lock, flags);
return chars;
}
static int tiocmget_submit_urb(struct hso_serial *serial,
struct hso_tiocmget *tiocmget,
struct usb_device *usb)
{
int result;
if (serial->parent->usb_gone)
return -ENODEV;
usb_fill_int_urb(tiocmget->urb, usb,
usb_rcvintpipe(usb,
tiocmget->endp->
bEndpointAddress & 0x7F),
&tiocmget->serial_state_notification,
sizeof(struct hso_serial_state_notification),
tiocmget_intr_callback, serial,
tiocmget->endp->bInterval);
result = usb_submit_urb(tiocmget->urb, GFP_ATOMIC);
if (result) {
dev_warn(&usb->dev, "%s usb_submit_urb failed %d\n", __func__,
result);
}
return result;
}
static void tiocmget_intr_callback(struct urb *urb)
{
struct hso_serial *serial = urb->context;
struct hso_tiocmget *tiocmget;
int status = urb->status;
u16 UART_state_bitmap, prev_UART_state_bitmap;
struct uart_icount *icount;
struct hso_serial_state_notification *serial_state_notification;
struct usb_device *usb;
struct usb_interface *interface;
int if_num;
/* Sanity checks */
if (!serial)
return;
if (status) {
handle_usb_error(status, __func__, serial->parent);
return;
}
/* tiocmget is only supported on HSO_PORT_MODEM */
tiocmget = serial->tiocmget;
if (!tiocmget)
return;
BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM);
usb = serial->parent->usb;
interface = serial->parent->interface;
if_num = interface->cur_altsetting->desc.bInterfaceNumber;
/* wIndex should be the USB interface number of the port to which the
* notification applies, which should always be the Modem port.
*/
serial_state_notification = &tiocmget->serial_state_notification;
if (serial_state_notification->bmRequestType != BM_REQUEST_TYPE ||
serial_state_notification->bNotification != B_NOTIFICATION ||
le16_to_cpu(serial_state_notification->wValue) != W_VALUE ||
le16_to_cpu(serial_state_notification->wIndex) != if_num ||
le16_to_cpu(serial_state_notification->wLength) != W_LENGTH) {
dev_warn(&usb->dev,
"hso received invalid serial state notification\n");
DUMP(serial_state_notification,
sizeof(struct hso_serial_state_notification));
} else {
UART_state_bitmap = le16_to_cpu(serial_state_notification->
UART_state_bitmap);
prev_UART_state_bitmap = tiocmget->prev_UART_state_bitmap;
icount = &tiocmget->icount;
spin_lock(&serial->serial_lock);
if ((UART_state_bitmap & B_OVERRUN) !=
(prev_UART_state_bitmap & B_OVERRUN))
icount->parity++;
if ((UART_state_bitmap & B_PARITY) !=
(prev_UART_state_bitmap & B_PARITY))
icount->parity++;
if ((UART_state_bitmap & B_FRAMING) !=
(prev_UART_state_bitmap & B_FRAMING))
icount->frame++;
if ((UART_state_bitmap & B_RING_SIGNAL) &&
!(prev_UART_state_bitmap & B_RING_SIGNAL))
icount->rng++;
if ((UART_state_bitmap & B_BREAK) !=
(prev_UART_state_bitmap & B_BREAK))
icount->brk++;
if ((UART_state_bitmap & B_TX_CARRIER) !=
(prev_UART_state_bitmap & B_TX_CARRIER))
icount->dsr++;
if ((UART_state_bitmap & B_RX_CARRIER) !=
(prev_UART_state_bitmap & B_RX_CARRIER))
icount->dcd++;
tiocmget->prev_UART_state_bitmap = UART_state_bitmap;
spin_unlock(&serial->serial_lock);
tiocmget->intr_completed = 1;
wake_up_interruptible(&tiocmget->waitq);
}
memset(serial_state_notification, 0,
sizeof(struct hso_serial_state_notification));
tiocmget_submit_urb(serial,
tiocmget,
serial->parent->usb);
}
/*
* next few functions largely stolen from drivers/serial/serial_core.c
*/
/* Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
* - mask passed in arg for lines of interest
* (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
* Caller should use TIOCGICOUNT to see which one it was
*/
static int
hso_wait_modem_status(struct hso_serial *serial, unsigned long arg)
{
DECLARE_WAITQUEUE(wait, current);
struct uart_icount cprev, cnow;
struct hso_tiocmget *tiocmget;
int ret;
tiocmget = serial->tiocmget;
if (!tiocmget)
return -ENOENT;
/*
* note the counters on entry
*/
spin_lock_irq(&serial->serial_lock);
memcpy(&cprev, &tiocmget->icount, sizeof(struct uart_icount));
spin_unlock_irq(&serial->serial_lock);
add_wait_queue(&tiocmget->waitq, &wait);
for (;;) {
spin_lock_irq(&serial->serial_lock);
memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
spin_unlock_irq(&serial->serial_lock);
set_current_state(TASK_INTERRUPTIBLE);
if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd))) {
ret = 0;
break;
}
schedule();
/* see if a signal did it */
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
cprev = cnow;
}
__set_current_state(TASK_RUNNING);
remove_wait_queue(&tiocmget->waitq, &wait);
return ret;
}
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
* NB: both 1->0 and 0->1 transitions are counted except for
* RI where only 0->1 is counted.
*/
static int hso_get_count(struct tty_struct *tty,
struct serial_icounter_struct *icount)
{
struct uart_icount cnow;
struct hso_serial *serial = tty->driver_data;
struct hso_tiocmget *tiocmget = serial->tiocmget;
memset(icount, 0, sizeof(struct serial_icounter_struct));
if (!tiocmget)
return -ENOENT;
spin_lock_irq(&serial->serial_lock);
memcpy(&cnow, &tiocmget->icount, sizeof(struct uart_icount));
spin_unlock_irq(&serial->serial_lock);
icount->cts = cnow.cts;
icount->dsr = cnow.dsr;
icount->rng = cnow.rng;
icount->dcd = cnow.dcd;
icount->rx = cnow.rx;
icount->tx = cnow.tx;
icount->frame = cnow.frame;
icount->overrun = cnow.overrun;
icount->parity = cnow.parity;
icount->brk = cnow.brk;
icount->buf_overrun = cnow.buf_overrun;
return 0;
}
static int hso_serial_tiocmget(struct tty_struct *tty)
{
int retval;
struct hso_serial *serial = tty->driver_data;
struct hso_tiocmget *tiocmget;
u16 UART_state_bitmap;
/* sanity check */
if (!serial) {
hso_dbg(0x1, "no tty structures\n");
return -EINVAL;
}
spin_lock_irq(&serial->serial_lock);
retval = ((serial->rts_state) ? TIOCM_RTS : 0) |
((serial->dtr_state) ? TIOCM_DTR : 0);
tiocmget = serial->tiocmget;
if (tiocmget) {
UART_state_bitmap = le16_to_cpu(
tiocmget->prev_UART_state_bitmap);
if (UART_state_bitmap & B_RING_SIGNAL)
retval |= TIOCM_RNG;
if (UART_state_bitmap & B_RX_CARRIER)
retval |= TIOCM_CD;
if (UART_state_bitmap & B_TX_CARRIER)
retval |= TIOCM_DSR;
}
spin_unlock_irq(&serial->serial_lock);
return retval;
}
static int hso_serial_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
int val = 0;
unsigned long flags;
int if_num;
struct hso_serial *serial = tty->driver_data;
struct usb_interface *interface;
/* sanity check */
if (!serial) {
hso_dbg(0x1, "no tty structures\n");
return -EINVAL;
}
if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
return -EINVAL;
interface = serial->parent->interface;
if_num = interface->cur_altsetting->desc.bInterfaceNumber;
spin_lock_irqsave(&serial->serial_lock, flags);
if (set & TIOCM_RTS)
serial->rts_state = 1;
if (set & TIOCM_DTR)
serial->dtr_state = 1;
if (clear & TIOCM_RTS)
serial->rts_state = 0;
if (clear & TIOCM_DTR)
serial->dtr_state = 0;
if (serial->dtr_state)
val |= 0x01;
if (serial->rts_state)
val |= 0x02;
spin_unlock_irqrestore(&serial->serial_lock, flags);
return usb_control_msg(serial->parent->usb,
usb_rcvctrlpipe(serial->parent->usb, 0), 0x22,
0x21, val, if_num, NULL, 0,
USB_CTRL_SET_TIMEOUT);
}
static int hso_serial_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct hso_serial *serial = tty->driver_data;
int ret = 0;
hso_dbg(0x8, "IOCTL cmd: %d, arg: %ld\n", cmd, arg);
if (!serial)
return -ENODEV;
switch (cmd) {
case TIOCMIWAIT:
ret = hso_wait_modem_status(serial, arg);
break;
default:
ret = -ENOIOCTLCMD;
break;
}
return ret;
}
/* starts a transmit */
static void hso_kick_transmit(struct hso_serial *serial)
{
u8 *temp;
unsigned long flags;
int res;
spin_lock_irqsave(&serial->serial_lock, flags);
if (!serial->tx_buffer_count)
goto out;
if (serial->tx_urb_used)
goto out;
/* Wakeup USB interface if necessary */
if (hso_get_activity(serial->parent) == -EAGAIN)
goto out;
/* Switch pointers around to avoid memcpy */
temp = serial->tx_buffer;
serial->tx_buffer = serial->tx_data;
serial->tx_data = temp;
serial->tx_data_count = serial->tx_buffer_count;
serial->tx_buffer_count = 0;
/* If temp is set, it means we switched buffers */
if (temp && serial->write_data) {
res = serial->write_data(serial);
if (res >= 0)
serial->tx_urb_used = 1;
}
out:
spin_unlock_irqrestore(&serial->serial_lock, flags);
}
/* make a request (for reading and writing data to muxed serial port) */
static int mux_device_request(struct hso_serial *serial, u8 type, u16 port,
struct urb *ctrl_urb,
struct usb_ctrlrequest *ctrl_req,
u8 *ctrl_urb_data, u32 size)
{
int result;
int pipe;
/* Sanity check */
if (!serial || !ctrl_urb || !ctrl_req) {
pr_err("%s: Wrong arguments\n", __func__);
return -EINVAL;
}
/* initialize */
ctrl_req->wValue = 0;
ctrl_req->wIndex = cpu_to_le16(hso_port_to_mux(port));
ctrl_req->wLength = cpu_to_le16(size);
if (type == USB_CDC_GET_ENCAPSULATED_RESPONSE) {
/* Reading command */
ctrl_req->bRequestType = USB_DIR_IN |
USB_TYPE_OPTION_VENDOR |
USB_RECIP_INTERFACE;
ctrl_req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
pipe = usb_rcvctrlpipe(serial->parent->usb, 0);
} else {
/* Writing command */
ctrl_req->bRequestType = USB_DIR_OUT |
USB_TYPE_OPTION_VENDOR |
USB_RECIP_INTERFACE;
ctrl_req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
pipe = usb_sndctrlpipe(serial->parent->usb, 0);
}
/* syslog */
hso_dbg(0x2, "%s command (%02x) len: %d, port: %d\n",
type == USB_CDC_GET_ENCAPSULATED_RESPONSE ? "Read" : "Write",
ctrl_req->bRequestType, ctrl_req->wLength, port);
/* Load ctrl urb */
ctrl_urb->transfer_flags = 0;
usb_fill_control_urb(ctrl_urb,
serial->parent->usb,
pipe,
(u8 *) ctrl_req,
ctrl_urb_data, size, ctrl_callback, serial);
/* Send it on merry way */
result = usb_submit_urb(ctrl_urb, GFP_ATOMIC);
if (result) {
dev_err(&ctrl_urb->dev->dev,
"%s failed submit ctrl_urb %d type %d\n", __func__,
result, type);
return result;
}
/* done */
return size;
}
/* called by intr_callback when read occurs */
static int hso_mux_serial_read(struct hso_serial *serial)
{
if (!serial)
return -EINVAL;
/* clean data */
memset(serial->rx_data[0], 0, CTRL_URB_RX_SIZE);
/* make the request */
if (serial->num_rx_urbs != 1) {
dev_err(&serial->parent->interface->dev,
"ERROR: mux'd reads with multiple buffers "
"not possible\n");
return 0;
}
return mux_device_request(serial,
USB_CDC_GET_ENCAPSULATED_RESPONSE,
serial->parent->port_spec & HSO_PORT_MASK,
serial->rx_urb[0],
&serial->ctrl_req_rx,
serial->rx_data[0], serial->rx_data_length);
}
/* used for muxed serial port callback (muxed serial read) */
static void intr_callback(struct urb *urb)
{
struct hso_shared_int *shared_int = urb->context;
struct hso_serial *serial;
unsigned char *port_req;
int status = urb->status;
int i;
usb_mark_last_busy(urb->dev);
/* sanity check */
if (!shared_int)
return;
/* status check */
if (status) {
handle_usb_error(status, __func__, NULL);
return;
}
hso_dbg(0x8, "--- Got intr callback 0x%02X ---\n", status);
/* what request? */
port_req = urb->transfer_buffer;
hso_dbg(0x8, "port_req = 0x%.2X\n", *port_req);
/* loop over all muxed ports to find the one sending this */
for (i = 0; i < 8; i++) {
/* max 8 channels on MUX */
if (*port_req & (1 << i)) {
serial = get_serial_by_shared_int_and_type(shared_int,
(1 << i));
if (serial != NULL) {
hso_dbg(0x1, "Pending read interrupt on port %d\n",
i);
spin_lock(&serial->serial_lock);
if (serial->rx_state == RX_IDLE &&
serial->port.count > 0) {
/* Setup and send a ctrl req read on
* port i */
if (!serial->rx_urb_filled[0]) {
serial->rx_state = RX_SENT;
hso_mux_serial_read(serial);
} else
serial->rx_state = RX_PENDING;
} else {
hso_dbg(0x1, "Already a read pending on port %d or port not open\n",
i);
}
spin_unlock(&serial->serial_lock);
}
}
}
/* Resubmit interrupt urb */
hso_mux_submit_intr_urb(shared_int, urb->dev, GFP_ATOMIC);
}
/* called for writing to muxed serial port */
static int hso_mux_serial_write_data(struct hso_serial *serial)
{
if (NULL == serial)
return -EINVAL;
return mux_device_request(serial,
USB_CDC_SEND_ENCAPSULATED_COMMAND,
serial->parent->port_spec & HSO_PORT_MASK,
serial->tx_urb,
&serial->ctrl_req_tx,
serial->tx_data, serial->tx_data_count);
}
/* write callback for Diag and CS port */
static void hso_std_serial_write_bulk_callback(struct urb *urb)
{
struct hso_serial *serial = urb->context;
int status = urb->status;
/* sanity check */
if (!serial) {
hso_dbg(0x1, "serial == NULL\n");
return;
}
spin_lock(&serial->serial_lock);
serial->tx_urb_used = 0;
spin_unlock(&serial->serial_lock);
if (status) {
handle_usb_error(status, __func__, serial->parent);
return;
}
hso_put_activity(serial->parent);
tty_port_tty_wakeup(&serial->port);
hso_kick_transmit(serial);
hso_dbg(0x1, "\n");
}
/* called for writing diag or CS serial port */
static int hso_std_serial_write_data(struct hso_serial *serial)
{
int count = serial->tx_data_count;
int result;
usb_fill_bulk_urb(serial->tx_urb,
serial->parent->usb,
usb_sndbulkpipe(serial->parent->usb,
serial->out_endp->
bEndpointAddress & 0x7F),
serial->tx_data, serial->tx_data_count,
hso_std_serial_write_bulk_callback, serial);
result = usb_submit_urb(serial->tx_urb, GFP_ATOMIC);
if (result) {
dev_warn(&serial->parent->usb->dev,
"Failed to submit urb - res %d\n", result);
return result;
}
return count;
}
/* callback after read or write on muxed serial port */
static void ctrl_callback(struct urb *urb)
{
struct hso_serial *serial = urb->context;
struct usb_ctrlrequest *req;
int status = urb->status;
/* sanity check */
if (!serial)
return;
spin_lock(&serial->serial_lock);
serial->tx_urb_used = 0;
spin_unlock(&serial->serial_lock);
if (status) {
handle_usb_error(status, __func__, serial->parent);
return;
}
/* what request? */
req = (struct usb_ctrlrequest *)(urb->setup_packet);
hso_dbg(0x8, "--- Got muxed ctrl callback 0x%02X ---\n", status);
hso_dbg(0x8, "Actual length of urb = %d\n", urb->actual_length);
DUMP1(urb->transfer_buffer, urb->actual_length);
if (req->bRequestType ==
(USB_DIR_IN | USB_TYPE_OPTION_VENDOR | USB_RECIP_INTERFACE)) {
/* response to a read command */
serial->rx_urb_filled[0] = 1;
spin_lock(&serial->serial_lock);
put_rxbuf_data_and_resubmit_ctrl_urb(serial);
spin_unlock(&serial->serial_lock);
} else {
hso_put_activity(serial->parent);
tty_port_tty_wakeup(&serial->port);
/* response to a write command */
hso_kick_transmit(serial);
}
}
/* handle RX data for serial port */
static int put_rxbuf_data(struct urb *urb, struct hso_serial *serial)
{
struct tty_struct *tty;
int count;
/* Sanity check */
if (urb == NULL || serial == NULL) {
hso_dbg(0x1, "serial = NULL\n");
return -2;
}
tty = tty_port_tty_get(&serial->port);
if (tty && tty_throttled(tty)) {
tty_kref_put(tty);
return -1;
}
/* Push data to tty */
hso_dbg(0x1, "data to push to tty\n");
count = tty_buffer_request_room(&serial->port, urb->actual_length);
if (count >= urb->actual_length) {
tty_insert_flip_string(&serial->port, urb->transfer_buffer,
urb->actual_length);
tty_flip_buffer_push(&serial->port);
} else {
dev_warn(&serial->parent->usb->dev,
"dropping data, %d bytes lost\n", urb->actual_length);
}
tty_kref_put(tty);
serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0;
return 0;
}
/* Base driver functions */
static void hso_log_port(struct hso_device *hso_dev)
{
char *port_type;
char port_dev[20];
switch (hso_dev->port_spec & HSO_PORT_MASK) {
case HSO_PORT_CONTROL:
port_type = "Control";
break;
case HSO_PORT_APP:
port_type = "Application";
break;
case HSO_PORT_GPS:
port_type = "GPS";
break;
case HSO_PORT_GPS_CONTROL:
port_type = "GPS control";
break;
case HSO_PORT_APP2:
port_type = "Application2";
break;
case HSO_PORT_PCSC:
port_type = "PCSC";
break;
case HSO_PORT_DIAG:
port_type = "Diagnostic";
break;
case HSO_PORT_DIAG2:
port_type = "Diagnostic2";
break;
case HSO_PORT_MODEM:
port_type = "Modem";
break;
case HSO_PORT_NETWORK:
port_type = "Network";
break;
default:
port_type = "Unknown";
break;
}
if ((hso_dev->port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
sprintf(port_dev, "%s", dev2net(hso_dev)->net->name);
} else
sprintf(port_dev, "/dev/%s%d", tty_filename,
dev2ser(hso_dev)->minor);
dev_dbg(&hso_dev->interface->dev, "HSO: Found %s port %s\n",
port_type, port_dev);
}
static int hso_start_net_device(struct hso_device *hso_dev)
{
int i, result = 0;
struct hso_net *hso_net = dev2net(hso_dev);
if (!hso_net)
return -ENODEV;
/* send URBs for all read buffers */
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
/* Prep a receive URB */
usb_fill_bulk_urb(hso_net->mux_bulk_rx_urb_pool[i],
hso_dev->usb,
usb_rcvbulkpipe(hso_dev->usb,
hso_net->in_endp->
bEndpointAddress & 0x7F),
hso_net->mux_bulk_rx_buf_pool[i],
MUX_BULK_RX_BUF_SIZE, read_bulk_callback,
hso_net);
/* Put it out there so the device can send us stuff */
result = usb_submit_urb(hso_net->mux_bulk_rx_urb_pool[i],
GFP_NOIO);
if (result)
dev_warn(&hso_dev->usb->dev,
"%s failed mux_bulk_rx_urb[%d] %d\n", __func__,
i, result);
}
return result;
}
static int hso_stop_net_device(struct hso_device *hso_dev)
{
int i;
struct hso_net *hso_net = dev2net(hso_dev);
if (!hso_net)
return -ENODEV;
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
if (hso_net->mux_bulk_rx_urb_pool[i])
usb_kill_urb(hso_net->mux_bulk_rx_urb_pool[i]);
}
if (hso_net->mux_bulk_tx_urb)
usb_kill_urb(hso_net->mux_bulk_tx_urb);
return 0;
}
static int hso_start_serial_device(struct hso_device *hso_dev, gfp_t flags)
{
int i, result = 0;
struct hso_serial *serial = dev2ser(hso_dev);
if (!serial)
return -ENODEV;
/* If it is not the MUX port fill in and submit a bulk urb (already
* allocated in hso_serial_start) */
if (!(serial->parent->port_spec & HSO_INTF_MUX)) {
for (i = 0; i < serial->num_rx_urbs; i++) {
usb_fill_bulk_urb(serial->rx_urb[i],
serial->parent->usb,
usb_rcvbulkpipe(serial->parent->usb,
serial->in_endp->
bEndpointAddress &
0x7F),
serial->rx_data[i],
serial->rx_data_length,
hso_std_serial_read_bulk_callback,
serial);
result = usb_submit_urb(serial->rx_urb[i], flags);
if (result) {
dev_warn(&serial->parent->usb->dev,
"Failed to submit urb - res %d\n",
result);
break;
}
}
} else {
mutex_lock(&serial->shared_int->shared_int_lock);
if (!serial->shared_int->use_count) {
result =
hso_mux_submit_intr_urb(serial->shared_int,
hso_dev->usb, flags);
}
serial->shared_int->use_count++;
mutex_unlock(&serial->shared_int->shared_int_lock);
}
if (serial->tiocmget)
tiocmget_submit_urb(serial,
serial->tiocmget,
serial->parent->usb);
return result;
}
static int hso_stop_serial_device(struct hso_device *hso_dev)
{
int i;
struct hso_serial *serial = dev2ser(hso_dev);
struct hso_tiocmget *tiocmget;
if (!serial)
return -ENODEV;
for (i = 0; i < serial->num_rx_urbs; i++) {
if (serial->rx_urb[i]) {
usb_kill_urb(serial->rx_urb[i]);
serial->rx_urb_filled[i] = 0;
}
}
serial->curr_rx_urb_idx = 0;
if (serial->tx_urb)
usb_kill_urb(serial->tx_urb);
if (serial->shared_int) {
mutex_lock(&serial->shared_int->shared_int_lock);
if (serial->shared_int->use_count &&
(--serial->shared_int->use_count == 0)) {
struct urb *urb;
urb = serial->shared_int->shared_intr_urb;
if (urb)
usb_kill_urb(urb);
}
mutex_unlock(&serial->shared_int->shared_int_lock);
}
tiocmget = serial->tiocmget;
if (tiocmget) {
wake_up_interruptible(&tiocmget->waitq);
usb_kill_urb(tiocmget->urb);
}
return 0;
}
hso: move tty_unregister outside hso_serial_common_free() The function hso_serial_common_free() is called either by the cleanup method of the tty or by the usb disconnect method. In the former case, the usb_disconnect() has been already called and the sysfs group associated to the device has been removed. By calling tty_unregister directly from the usb_disconnect() method, we avoid a warning due to the removal of the sysfs group of the usb device. Example of warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 778 at fs/sysfs/group.c:225 sysfs_remove_group+0x50/0x94() sysfs group c0645a88 not found for kobject 'ttyHS5' Modules linked in: CPU: 0 PID: 778 Comm: kworker/0:3 Tainted: G W 3.18.0+ #105 Workqueue: events release_one_tty [<c000dfe4>] (unwind_backtrace) from [<c000c014>] (show_stack+0x14/0x1c) [<c000c014>] (show_stack) from [<c0016bac>] (warn_slowpath_common+0x5c/0x7c) [<c0016bac>] (warn_slowpath_common) from [<c0016c60>] (warn_slowpath_fmt+0x30/0x40) [<c0016c60>] (warn_slowpath_fmt) from [<c00ddd14>] (sysfs_remove_group+0x50/0x94) [<c00ddd14>] (sysfs_remove_group) from [<c0221e44>] (device_del+0x30/0x190) [<c0221e44>] (device_del) from [<c0221fb0>] (device_unregister+0xc/0x18) [<c0221fb0>] (device_unregister) from [<c0221fec>] (device_destroy+0x30/0x3c) [<c0221fec>] (device_destroy) from [<c01fe1dc>] (tty_unregister_device+0x2c/0x5c) [<c01fe1dc>] (tty_unregister_device) from [<c029a428>] (hso_serial_common_free+0x2c/0x88) [<c029a428>] (hso_serial_common_free) from [<c029a4c0>] (hso_serial_ref_free+0x3c/0xb8) [<c029a4c0>] (hso_serial_ref_free) from [<c01ff430>] (release_one_tty+0x30/0x84) [<c01ff430>] (release_one_tty) from [<c00271d4>] (process_one_work+0x21c/0x3c8) [<c00271d4>] (process_one_work) from [<c0027758>] (worker_thread+0x3d8/0x560) [<c0027758>] (worker_thread) from [<c002be4c>] (kthread+0xc0/0xcc) [<c002be4c>] (kthread) from [<c0009630>] (ret_from_fork+0x14/0x24) ---[ end trace cb88537fdc8fa208 ]--- Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 12:22:00 +00:00
static void hso_serial_tty_unregister(struct hso_serial *serial)
{
tty_unregister_device(tty_drv, serial->minor);
hso: move tty_unregister outside hso_serial_common_free() The function hso_serial_common_free() is called either by the cleanup method of the tty or by the usb disconnect method. In the former case, the usb_disconnect() has been already called and the sysfs group associated to the device has been removed. By calling tty_unregister directly from the usb_disconnect() method, we avoid a warning due to the removal of the sysfs group of the usb device. Example of warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 778 at fs/sysfs/group.c:225 sysfs_remove_group+0x50/0x94() sysfs group c0645a88 not found for kobject 'ttyHS5' Modules linked in: CPU: 0 PID: 778 Comm: kworker/0:3 Tainted: G W 3.18.0+ #105 Workqueue: events release_one_tty [<c000dfe4>] (unwind_backtrace) from [<c000c014>] (show_stack+0x14/0x1c) [<c000c014>] (show_stack) from [<c0016bac>] (warn_slowpath_common+0x5c/0x7c) [<c0016bac>] (warn_slowpath_common) from [<c0016c60>] (warn_slowpath_fmt+0x30/0x40) [<c0016c60>] (warn_slowpath_fmt) from [<c00ddd14>] (sysfs_remove_group+0x50/0x94) [<c00ddd14>] (sysfs_remove_group) from [<c0221e44>] (device_del+0x30/0x190) [<c0221e44>] (device_del) from [<c0221fb0>] (device_unregister+0xc/0x18) [<c0221fb0>] (device_unregister) from [<c0221fec>] (device_destroy+0x30/0x3c) [<c0221fec>] (device_destroy) from [<c01fe1dc>] (tty_unregister_device+0x2c/0x5c) [<c01fe1dc>] (tty_unregister_device) from [<c029a428>] (hso_serial_common_free+0x2c/0x88) [<c029a428>] (hso_serial_common_free) from [<c029a4c0>] (hso_serial_ref_free+0x3c/0xb8) [<c029a4c0>] (hso_serial_ref_free) from [<c01ff430>] (release_one_tty+0x30/0x84) [<c01ff430>] (release_one_tty) from [<c00271d4>] (process_one_work+0x21c/0x3c8) [<c00271d4>] (process_one_work) from [<c0027758>] (worker_thread+0x3d8/0x560) [<c0027758>] (worker_thread) from [<c002be4c>] (kthread+0xc0/0xcc) [<c002be4c>] (kthread) from [<c0009630>] (ret_from_fork+0x14/0x24) ---[ end trace cb88537fdc8fa208 ]--- Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 12:22:00 +00:00
}
static void hso_serial_common_free(struct hso_serial *serial)
{
int i;
for (i = 0; i < serial->num_rx_urbs; i++) {
/* unlink and free RX URB */
usb_free_urb(serial->rx_urb[i]);
/* free the RX buffer */
kfree(serial->rx_data[i]);
}
/* unlink and free TX URB */
usb_free_urb(serial->tx_urb);
kfree(serial->tx_buffer);
kfree(serial->tx_data);
tty_port_destroy(&serial->port);
}
static int hso_serial_common_create(struct hso_serial *serial, int num_urbs,
int rx_size, int tx_size)
{
int minor;
int i;
tty_port_init(&serial->port);
minor = get_free_serial_index();
if (minor < 0)
goto exit;
/* register our minor number */
serial->parent->dev = tty_port_register_device_attr(&serial->port,
tty_drv, minor, &serial->parent->interface->dev,
serial->parent, hso_serial_dev_groups);
/* fill in specific data for later use */
serial->minor = minor;
serial->magic = HSO_SERIAL_MAGIC;
spin_lock_init(&serial->serial_lock);
serial->num_rx_urbs = num_urbs;
/* RX, allocate urb and initialize */
/* prepare our RX buffer */
serial->rx_data_length = rx_size;
for (i = 0; i < serial->num_rx_urbs; i++) {
serial->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
if (!serial->rx_urb[i])
goto exit;
serial->rx_urb[i]->transfer_buffer = NULL;
serial->rx_urb[i]->transfer_buffer_length = 0;
serial->rx_data[i] = kzalloc(serial->rx_data_length,
GFP_KERNEL);
if (!serial->rx_data[i])
goto exit;
}
/* TX, allocate urb and initialize */
serial->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!serial->tx_urb)
goto exit;
serial->tx_urb->transfer_buffer = NULL;
serial->tx_urb->transfer_buffer_length = 0;
/* prepare our TX buffer */
serial->tx_data_count = 0;
serial->tx_buffer_count = 0;
serial->tx_data_length = tx_size;
serial->tx_data = kzalloc(serial->tx_data_length, GFP_KERNEL);
if (!serial->tx_data)
goto exit;
serial->tx_buffer = kzalloc(serial->tx_data_length, GFP_KERNEL);
if (!serial->tx_buffer)
goto exit;
return 0;
exit:
hso: move tty_unregister outside hso_serial_common_free() The function hso_serial_common_free() is called either by the cleanup method of the tty or by the usb disconnect method. In the former case, the usb_disconnect() has been already called and the sysfs group associated to the device has been removed. By calling tty_unregister directly from the usb_disconnect() method, we avoid a warning due to the removal of the sysfs group of the usb device. Example of warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 778 at fs/sysfs/group.c:225 sysfs_remove_group+0x50/0x94() sysfs group c0645a88 not found for kobject 'ttyHS5' Modules linked in: CPU: 0 PID: 778 Comm: kworker/0:3 Tainted: G W 3.18.0+ #105 Workqueue: events release_one_tty [<c000dfe4>] (unwind_backtrace) from [<c000c014>] (show_stack+0x14/0x1c) [<c000c014>] (show_stack) from [<c0016bac>] (warn_slowpath_common+0x5c/0x7c) [<c0016bac>] (warn_slowpath_common) from [<c0016c60>] (warn_slowpath_fmt+0x30/0x40) [<c0016c60>] (warn_slowpath_fmt) from [<c00ddd14>] (sysfs_remove_group+0x50/0x94) [<c00ddd14>] (sysfs_remove_group) from [<c0221e44>] (device_del+0x30/0x190) [<c0221e44>] (device_del) from [<c0221fb0>] (device_unregister+0xc/0x18) [<c0221fb0>] (device_unregister) from [<c0221fec>] (device_destroy+0x30/0x3c) [<c0221fec>] (device_destroy) from [<c01fe1dc>] (tty_unregister_device+0x2c/0x5c) [<c01fe1dc>] (tty_unregister_device) from [<c029a428>] (hso_serial_common_free+0x2c/0x88) [<c029a428>] (hso_serial_common_free) from [<c029a4c0>] (hso_serial_ref_free+0x3c/0xb8) [<c029a4c0>] (hso_serial_ref_free) from [<c01ff430>] (release_one_tty+0x30/0x84) [<c01ff430>] (release_one_tty) from [<c00271d4>] (process_one_work+0x21c/0x3c8) [<c00271d4>] (process_one_work) from [<c0027758>] (worker_thread+0x3d8/0x560) [<c0027758>] (worker_thread) from [<c002be4c>] (kthread+0xc0/0xcc) [<c002be4c>] (kthread) from [<c0009630>] (ret_from_fork+0x14/0x24) ---[ end trace cb88537fdc8fa208 ]--- Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 12:22:00 +00:00
hso_serial_tty_unregister(serial);
hso_serial_common_free(serial);
return -1;
}
/* Creates a general hso device */
static struct hso_device *hso_create_device(struct usb_interface *intf,
int port_spec)
{
struct hso_device *hso_dev;
hso_dev = kzalloc(sizeof(*hso_dev), GFP_ATOMIC);
if (!hso_dev)
return NULL;
hso_dev->port_spec = port_spec;
hso_dev->usb = interface_to_usbdev(intf);
hso_dev->interface = intf;
kref_init(&hso_dev->ref);
mutex_init(&hso_dev->mutex);
INIT_WORK(&hso_dev->async_get_intf, async_get_intf);
INIT_WORK(&hso_dev->async_put_intf, async_put_intf);
return hso_dev;
}
/* Removes a network device in the network device table */
static int remove_net_device(struct hso_device *hso_dev)
{
int i;
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
if (network_table[i] == hso_dev) {
network_table[i] = NULL;
break;
}
}
if (i == HSO_MAX_NET_DEVICES)
return -1;
return 0;
}
/* Frees our network device */
static void hso_free_net_device(struct hso_device *hso_dev)
{
int i;
struct hso_net *hso_net = dev2net(hso_dev);
if (!hso_net)
return;
remove_net_device(hso_net->parent);
hso: fix a use after free condition This needs to go to netdev: From: Octavian Purdila <octavian.purdila@intel.com> In hso_free_net_device hso_net pointer is freed and then used to cleanup urb pools. Catched with SLAB_DEBUG during S3 resume: [ 95.824442] Pid: 389, comm: khubd Tainted: G C 2.6.36greenridge-01400-g423cf13-dirty #154 Type2 - Board Product Name1/OakTrail [ 95.824442] EIP: 0060:[<c1151551>] EFLAGS: 00010202 CPU: 0 [ 95.824442] EIP is at kref_put+0x29/0x42 [ 95.824442] EAX: 6b6b6b6b EBX: 6b6b6b6b ECX: c2806b40 EDX: 00000037 [ 95.824442] ESI: c1258d56 EDI: edd3d128 EBP: ee8cde0c ESP: ee8cde04 [ 95.824442] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 95.824442] Process khubd (pid: 389, ti=ee8cc000 task=ee95ed10 task.ti=ee8cc000) [ 95.824442] Stack: [ 95.824442] edd07020 00000000 ee8cde14 c1258b77 ee8cde38 ef933a44 ef93572b ef935dec [ 95.824442] <0> 0000099a 6b6b6b6b 00000000 ee2da748 edd3e0c0 ee8cde54 ef933b9f ee3b53f8 [ 95.824442] <0> 00000002 ee2da748 ee2da764 ef936658 ee8cde60 ef933d0c ee2da748 ee8cde84 [ 95.824442] Call Trace: [ 95.824442] [<c1258b77>] ? usb_free_urb+0x11/0x13 [ 95.824442] [<ef933a44>] ? hso_free_net_device+0x81/0xd8 [hso] [ 95.824442] [<ef933b9f>] ? hso_free_interface+0x104/0x111 [hso] [ 95.824442] [<ef933d0c>] ? hso_disconnect+0xb/0x18 [hso] [ 95.824442] [<c125b7f1>] ? usb_unbind_interface+0x44/0x14a [ 95.824442] [<c11e56e8>] ? __device_release_driver+0x6f/0xb1 [ 95.824442] [<c11e57c7>] ? device_release_driver+0x18/0x23 [ 95.824442] [<c11e4e92>] ? bus_remove_device+0x8a/0xa1 [ 95.824442] [<c11e3970>] ? device_del+0x129/0x163 [ 95.824442] [<c11e2dc0>] ? put_device+0xf/0x11 [ 95.824442] [<c11e39bc>] ? device_unregister+0x12/0x15 [ 95.824442] [<c125915f>] ? usb_disable_device+0x90/0xf0 [ 95.824442] [<c125544f>] ? usb_disconnect+0x6d/0xf8 [ 95.824442] [<c1255f91>] ? hub_thread+0x3fc/0xc57 [ 95.824442] [<c1048526>] ? autoremove_wake_function+0x0/0x2f [ 95.824442] [<c102529d>] ? complete+0x34/0x3e [ 95.824442] [<c1255b95>] ? hub_thread+0x0/0xc57 [ 95.824442] [<c10481fc>] ? kthread+0x63/0x68 [ 95.824442] [<c1048199>] ? kthread+0x0/0x68 [ 95.824442] [<c1002d76>] ? kernel_thread_helper+0x6/0x10 Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08 03:45:25 +00:00
if (hso_net->net)
unregister_netdev(hso_net->net);
/* start freeing */
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
usb_free_urb(hso_net->mux_bulk_rx_urb_pool[i]);
kfree(hso_net->mux_bulk_rx_buf_pool[i]);
hso_net->mux_bulk_rx_buf_pool[i] = NULL;
}
usb_free_urb(hso_net->mux_bulk_tx_urb);
kfree(hso_net->mux_bulk_tx_buf);
hso_net->mux_bulk_tx_buf = NULL;
hso: fix a use after free condition This needs to go to netdev: From: Octavian Purdila <octavian.purdila@intel.com> In hso_free_net_device hso_net pointer is freed and then used to cleanup urb pools. Catched with SLAB_DEBUG during S3 resume: [ 95.824442] Pid: 389, comm: khubd Tainted: G C 2.6.36greenridge-01400-g423cf13-dirty #154 Type2 - Board Product Name1/OakTrail [ 95.824442] EIP: 0060:[<c1151551>] EFLAGS: 00010202 CPU: 0 [ 95.824442] EIP is at kref_put+0x29/0x42 [ 95.824442] EAX: 6b6b6b6b EBX: 6b6b6b6b ECX: c2806b40 EDX: 00000037 [ 95.824442] ESI: c1258d56 EDI: edd3d128 EBP: ee8cde0c ESP: ee8cde04 [ 95.824442] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 95.824442] Process khubd (pid: 389, ti=ee8cc000 task=ee95ed10 task.ti=ee8cc000) [ 95.824442] Stack: [ 95.824442] edd07020 00000000 ee8cde14 c1258b77 ee8cde38 ef933a44 ef93572b ef935dec [ 95.824442] <0> 0000099a 6b6b6b6b 00000000 ee2da748 edd3e0c0 ee8cde54 ef933b9f ee3b53f8 [ 95.824442] <0> 00000002 ee2da748 ee2da764 ef936658 ee8cde60 ef933d0c ee2da748 ee8cde84 [ 95.824442] Call Trace: [ 95.824442] [<c1258b77>] ? usb_free_urb+0x11/0x13 [ 95.824442] [<ef933a44>] ? hso_free_net_device+0x81/0xd8 [hso] [ 95.824442] [<ef933b9f>] ? hso_free_interface+0x104/0x111 [hso] [ 95.824442] [<ef933d0c>] ? hso_disconnect+0xb/0x18 [hso] [ 95.824442] [<c125b7f1>] ? usb_unbind_interface+0x44/0x14a [ 95.824442] [<c11e56e8>] ? __device_release_driver+0x6f/0xb1 [ 95.824442] [<c11e57c7>] ? device_release_driver+0x18/0x23 [ 95.824442] [<c11e4e92>] ? bus_remove_device+0x8a/0xa1 [ 95.824442] [<c11e3970>] ? device_del+0x129/0x163 [ 95.824442] [<c11e2dc0>] ? put_device+0xf/0x11 [ 95.824442] [<c11e39bc>] ? device_unregister+0x12/0x15 [ 95.824442] [<c125915f>] ? usb_disable_device+0x90/0xf0 [ 95.824442] [<c125544f>] ? usb_disconnect+0x6d/0xf8 [ 95.824442] [<c1255f91>] ? hub_thread+0x3fc/0xc57 [ 95.824442] [<c1048526>] ? autoremove_wake_function+0x0/0x2f [ 95.824442] [<c102529d>] ? complete+0x34/0x3e [ 95.824442] [<c1255b95>] ? hub_thread+0x0/0xc57 [ 95.824442] [<c10481fc>] ? kthread+0x63/0x68 [ 95.824442] [<c1048199>] ? kthread+0x0/0x68 [ 95.824442] [<c1002d76>] ? kernel_thread_helper+0x6/0x10 Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-08 03:45:25 +00:00
if (hso_net->net)
free_netdev(hso_net->net);
kfree(hso_dev);
}
static const struct net_device_ops hso_netdev_ops = {
.ndo_open = hso_net_open,
.ndo_stop = hso_net_close,
.ndo_start_xmit = hso_net_start_xmit,
.ndo_tx_timeout = hso_net_tx_timeout,
};
/* initialize the network interface */
static void hso_net_init(struct net_device *net)
{
struct hso_net *hso_net = netdev_priv(net);
hso_dbg(0x1, "sizeof hso_net is %zu\n", sizeof(*hso_net));
/* fill in the other fields */
net->netdev_ops = &hso_netdev_ops;
net->watchdog_timeo = HSO_NET_TX_TIMEOUT;
net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
net->type = ARPHRD_NONE;
net->mtu = DEFAULT_MTU - 14;
net->tx_queue_len = 10;
net->ethtool_ops = &ops;
/* and initialize the semaphore */
spin_lock_init(&hso_net->net_lock);
}
/* Adds a network device in the network device table */
static int add_net_device(struct hso_device *hso_dev)
{
int i;
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
if (network_table[i] == NULL) {
network_table[i] = hso_dev;
break;
}
}
if (i == HSO_MAX_NET_DEVICES)
return -1;
return 0;
}
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 11:01:37 +00:00
static int hso_rfkill_set_block(void *data, bool blocked)
{
struct hso_device *hso_dev = data;
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 11:01:37 +00:00
int enabled = !blocked;
int rv;
mutex_lock(&hso_dev->mutex);
if (hso_dev->usb_gone)
rv = 0;
else
rv = usb_control_msg(hso_dev->usb, usb_rcvctrlpipe(hso_dev->usb, 0),
enabled ? 0x82 : 0x81, 0x40, 0, 0, NULL, 0,
USB_CTRL_SET_TIMEOUT);
mutex_unlock(&hso_dev->mutex);
return rv;
}
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 11:01:37 +00:00
static const struct rfkill_ops hso_rfkill_ops = {
.set_block = hso_rfkill_set_block,
};
/* Creates and sets up everything for rfkill */
static void hso_create_rfkill(struct hso_device *hso_dev,
struct usb_interface *interface)
{
struct hso_net *hso_net = dev2net(hso_dev);
struct device *dev = &hso_net->net->dev;
static u32 rfkill_counter;
snprintf(hso_net->name, sizeof(hso_net->name), "hso-%d",
rfkill_counter++);
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 11:01:37 +00:00
hso_net->rfkill = rfkill_alloc(hso_net->name,
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 11:01:37 +00:00
&interface_to_usbdev(interface)->dev,
RFKILL_TYPE_WWAN,
&hso_rfkill_ops, hso_dev);
if (!hso_net->rfkill) {
dev_err(dev, "%s - Out of memory\n", __func__);
return;
}
if (rfkill_register(hso_net->rfkill) < 0) {
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 11:01:37 +00:00
rfkill_destroy(hso_net->rfkill);
hso_net->rfkill = NULL;
dev_err(dev, "%s - Failed to register rfkill\n", __func__);
return;
}
}
static struct device_type hso_type = {
.name = "wwan",
};
/* Creates our network device */
static struct hso_device *hso_create_net_device(struct usb_interface *interface,
int port_spec)
{
int result, i;
struct net_device *net;
struct hso_net *hso_net;
struct hso_device *hso_dev;
hso_dev = hso_create_device(interface, port_spec);
if (!hso_dev)
return NULL;
/* allocate our network device, then we can put in our private data */
/* call hso_net_init to do the basic initialization */
net = alloc_netdev(sizeof(struct hso_net), "hso%d", NET_NAME_UNKNOWN,
hso_net_init);
if (!net) {
dev_err(&interface->dev, "Unable to create ethernet device\n");
goto exit;
}
hso_net = netdev_priv(net);
hso_dev->port_data.dev_net = hso_net;
hso_net->net = net;
hso_net->parent = hso_dev;
hso_net->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
USB_DIR_IN);
if (!hso_net->in_endp) {
dev_err(&interface->dev, "Can't find BULK IN endpoint\n");
goto exit;
}
hso_net->out_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
USB_DIR_OUT);
if (!hso_net->out_endp) {
dev_err(&interface->dev, "Can't find BULK OUT endpoint\n");
goto exit;
}
SET_NETDEV_DEV(net, &interface->dev);
SET_NETDEV_DEVTYPE(net, &hso_type);
/* start allocating */
for (i = 0; i < MUX_BULK_RX_BUF_COUNT; i++) {
hso_net->mux_bulk_rx_urb_pool[i] = usb_alloc_urb(0, GFP_KERNEL);
if (!hso_net->mux_bulk_rx_urb_pool[i])
goto exit;
hso_net->mux_bulk_rx_buf_pool[i] = kzalloc(MUX_BULK_RX_BUF_SIZE,
GFP_KERNEL);
if (!hso_net->mux_bulk_rx_buf_pool[i])
goto exit;
}
hso_net->mux_bulk_tx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!hso_net->mux_bulk_tx_urb)
goto exit;
hso_net->mux_bulk_tx_buf = kzalloc(MUX_BULK_TX_BUF_SIZE, GFP_KERNEL);
if (!hso_net->mux_bulk_tx_buf)
goto exit;
add_net_device(hso_dev);
net: hso: register netdev later to avoid a race condition If the netdev is accessed before the urbs are initialized, there will be NULL pointer dereferences. That is avoided by registering it when it is fully initialized. This case occurs e.g. if dhcpcd is running in the background and the device is probed, either after insmod hso or when the device appears on the usb bus. A backtrace is the following: [ 1357.356048] usb 1-2: new high-speed USB device number 12 using ehci-omap [ 1357.551177] usb 1-2: New USB device found, idVendor=0af0, idProduct=8800 [ 1357.558654] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 1357.568572] usb 1-2: Product: Globetrotter HSUPA Modem [ 1357.574096] usb 1-2: Manufacturer: Option N.V. [ 1357.685882] hso 1-2:1.5: Not our interface [ 1460.886352] hso: unloaded [ 1460.889984] usbcore: deregistering interface driver hso [ 1513.769134] hso: ../drivers/net/usb/hso.c: Option Wireless [ 1513.846771] Unable to handle kernel NULL pointer dereference at virtual address 00000030 [ 1513.887664] hso 1-2:1.5: Not our interface [ 1513.906890] usbcore: registered new interface driver hso [ 1513.937988] pgd = ecdec000 [ 1513.949890] [00000030] *pgd=acd15831, *pte=00000000, *ppte=00000000 [ 1513.956573] Internal error: Oops: 817 [#1] PREEMPT SMP ARM [ 1513.962371] Modules linked in: hso usb_f_ecm omap2430 bnep bluetooth g_ether usb_f_rndis u_ether libcomposite configfs ipv6 arc4 wl18xx wlcore mac80211 cfg80211 bq27xxx_battery panel_tpo_td028ttec1 omapdrm drm_kms_helper cfbfillrect snd_soc_simple_card syscopyarea cfbimgblt snd_soc_simple_card_utils sysfillrect sysimgblt fb_sys_fops snd_soc_omap_twl4030 cfbcopyarea encoder_opa362 drm twl4030_madc_hwmon wwan_on_off snd_soc_gtm601 pwm_omap_dmtimer generic_adc_battery connector_analog_tv pwm_bl extcon_gpio omap3_isp wlcore_sdio videobuf2_dma_contig videobuf2_memops w1_bq27000 videobuf2_v4l2 videobuf2_core omap_hdq snd_soc_omap_mcbsp ov9650 snd_soc_omap bmp280_i2c bmg160_i2c v4l2_common snd_pcm_dmaengine bmp280 bmg160_core at24 bmc150_magn_i2c nvmem_core videodev phy_twl4030_usb bmc150_accel_i2c tsc2007 [ 1514.037384] bmc150_magn bmc150_accel_core media leds_tca6507 bno055 industrialio_triggered_buffer kfifo_buf gpio_twl4030 musb_hdrc snd_soc_twl4030 twl4030_vibra twl4030_madc twl4030_pwrbutton twl4030_charger industrialio w2sg0004 ehci_omap omapdss [last unloaded: hso] [ 1514.062622] CPU: 0 PID: 3433 Comm: dhcpcd Tainted: G W 4.11.0-rc8-letux+ #1 [ 1514.071136] Hardware name: Generic OMAP36xx (Flattened Device Tree) [ 1514.077758] task: ee748240 task.stack: ecdd6000 [ 1514.082580] PC is at hso_start_net_device+0x50/0xc0 [hso] [ 1514.088287] LR is at hso_net_open+0x68/0x84 [hso] [ 1514.093231] pc : [<bf79c304>] lr : [<bf79ced8>] psr: a00f0013 sp : ecdd7e20 ip : 00000000 fp : ffffffff [ 1514.105316] r10: 00000000 r9 : ed0e080c r8 : ecd8fe2c [ 1514.110839] r7 : bf79cef4 r6 : ecd8fe00 r5 : 00000000 r4 : ed0dbd80 [ 1514.117706] r3 : 00000000 r2 : c0020c80 r1 : 00000000 r0 : ecdb7800 [ 1514.124572] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 1514.132110] Control: 10c5387d Table: acdec019 DAC: 00000051 [ 1514.138153] Process dhcpcd (pid: 3433, stack limit = 0xecdd6218) [ 1514.144470] Stack: (0xecdd7e20 to 0xecdd8000) [ 1514.149078] 7e20: ed0dbd80 ecd8fe98 00000001 00000000 ecd8f800 ecd8fe00 ecd8fe60 00000000 [ 1514.157714] 7e40: ed0e080c bf79ced8 bf79ce70 ecd8f800 00000001 bf7a0258 ecd8f830 c068d958 [ 1514.166320] 7e60: c068d8b8 ecd8f800 00000001 00001091 00001090 c068dba4 ecd8f800 00001090 [ 1514.174926] 7e80: ecd8f940 ecd8f800 00000000 c068dc60 00000000 00000001 ed0e0800 ecd8f800 [ 1514.183563] 7ea0: 00000000 c06feaa8 c0ca39c2 beea57dc 00000020 00000000 306f7368 00000000 [ 1514.192169] 7ec0: 00000000 00000000 00001091 00000000 00000000 00000000 00000000 00008914 [ 1514.200805] 7ee0: eaa9ab60 beea57dc c0c9bfc0 eaa9ab40 00000006 00000000 00046858 c066a948 [ 1514.209411] 7f00: beea57dc eaa9ab60 ecc6b0c0 c02837b0 00000006 c0282c90 0000c000 c0283654 [ 1514.218017] 7f20: c09b0c00 c098bc31 00000001 c0c5e513 c0c5e513 00000000 c0151354 c01a20c0 [ 1514.226654] 7f40: c0c5e513 c01a3134 ecdd6000 c01a3160 ee7487f0 600f0013 00000000 ee748240 [ 1514.235260] 7f60: ee748734 00000000 ecc6b0c0 ecc6b0c0 beea57dc 00008914 00000006 00000000 [ 1514.243896] 7f80: 00046858 c02837b0 00001091 0003a1f0 00046608 0003a248 00000036 c01071e4 [ 1514.252502] 7fa0: ecdd6000 c0107040 0003a1f0 00046608 00000006 00008914 beea57dc 00001091 [ 1514.261108] 7fc0: 0003a1f0 00046608 0003a248 00000036 0003ac0c 00046608 00046610 00046858 [ 1514.269744] 7fe0: 0003a0ac beea57d4 000167eb b6f23106 400f0030 00000006 00000000 00000000 [ 1514.278411] [<bf79c304>] (hso_start_net_device [hso]) from [<bf79ced8>] (hso_net_open+0x68/0x84 [hso]) [ 1514.288238] [<bf79ced8>] (hso_net_open [hso]) from [<c068d958>] (__dev_open+0xa0/0xf4) [ 1514.296600] [<c068d958>] (__dev_open) from [<c068dba4>] (__dev_change_flags+0x8c/0x130) [ 1514.305023] [<c068dba4>] (__dev_change_flags) from [<c068dc60>] (dev_change_flags+0x18/0x48) [ 1514.313934] [<c068dc60>] (dev_change_flags) from [<c06feaa8>] (devinet_ioctl+0x348/0x714) [ 1514.322540] [<c06feaa8>] (devinet_ioctl) from [<c066a948>] (sock_ioctl+0x2b0/0x308) [ 1514.330627] [<c066a948>] (sock_ioctl) from [<c0282c90>] (vfs_ioctl+0x20/0x34) [ 1514.338165] [<c0282c90>] (vfs_ioctl) from [<c0283654>] (do_vfs_ioctl+0x82c/0x93c) [ 1514.346038] [<c0283654>] (do_vfs_ioctl) from [<c02837b0>] (SyS_ioctl+0x4c/0x74) [ 1514.353759] [<c02837b0>] (SyS_ioctl) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [ 1514.361755] Code: e3822103 e3822080 e1822781 e5981014 (e5832030) [ 1514.510833] ---[ end trace dfb3e53c657f34a0 ]--- Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26 17:26:40 +00:00
/* registering our net device */
result = register_netdev(net);
if (result) {
dev_err(&interface->dev, "Failed to register device\n");
goto exit;
}
hso_log_port(hso_dev);
hso_create_rfkill(hso_dev, interface);
return hso_dev;
exit:
hso_free_net_device(hso_dev);
return NULL;
}
static void hso_free_tiomget(struct hso_serial *serial)
{
struct hso_tiocmget *tiocmget;
if (!serial)
return;
tiocmget = serial->tiocmget;
if (tiocmget) {
usb_free_urb(tiocmget->urb);
tiocmget->urb = NULL;
serial->tiocmget = NULL;
kfree(tiocmget);
}
}
/* Frees an AT channel ( goes for both mux and non-mux ) */
static void hso_free_serial_device(struct hso_device *hso_dev)
{
struct hso_serial *serial = dev2ser(hso_dev);
if (!serial)
return;
hso_serial_common_free(serial);
if (serial->shared_int) {
mutex_lock(&serial->shared_int->shared_int_lock);
if (--serial->shared_int->ref_count == 0)
hso_free_shared_int(serial->shared_int);
else
mutex_unlock(&serial->shared_int->shared_int_lock);
}
hso_free_tiomget(serial);
kfree(serial);
kfree(hso_dev);
}
/* Creates a bulk AT channel */
static struct hso_device *hso_create_bulk_serial_device(
struct usb_interface *interface, int port)
{
struct hso_device *hso_dev;
struct hso_serial *serial;
int num_urbs;
struct hso_tiocmget *tiocmget;
hso_dev = hso_create_device(interface, port);
if (!hso_dev)
return NULL;
serial = kzalloc(sizeof(*serial), GFP_KERNEL);
if (!serial)
goto exit;
serial->parent = hso_dev;
hso_dev->port_data.dev_serial = serial;
if ((port & HSO_PORT_MASK) == HSO_PORT_MODEM) {
num_urbs = 2;
serial->tiocmget = kzalloc(sizeof(struct hso_tiocmget),
GFP_KERNEL);
/* it isn't going to break our heart if serial->tiocmget
* allocation fails don't bother checking this.
*/
if (serial->tiocmget) {
tiocmget = serial->tiocmget;
tiocmget->urb = usb_alloc_urb(0, GFP_KERNEL);
if (tiocmget->urb) {
mutex_init(&tiocmget->mutex);
init_waitqueue_head(&tiocmget->waitq);
tiocmget->endp = hso_get_ep(
interface,
USB_ENDPOINT_XFER_INT,
USB_DIR_IN);
} else
hso_free_tiomget(serial);
}
}
else
num_urbs = 1;
if (hso_serial_common_create(serial, num_urbs, BULK_URB_RX_SIZE,
BULK_URB_TX_SIZE))
goto exit;
serial->in_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_BULK,
USB_DIR_IN);
if (!serial->in_endp) {
dev_err(&interface->dev, "Failed to find BULK IN ep\n");
goto exit2;
}
if (!
(serial->out_endp =
hso_get_ep(interface, USB_ENDPOINT_XFER_BULK, USB_DIR_OUT))) {
dev_err(&interface->dev, "Failed to find BULK IN ep\n");
goto exit2;
}
serial->write_data = hso_std_serial_write_data;
/* and record this serial */
set_serial_by_index(serial->minor, serial);
/* setup the proc dirs and files if needed */
hso_log_port(hso_dev);
/* done, return it */
return hso_dev;
exit2:
hso: move tty_unregister outside hso_serial_common_free() The function hso_serial_common_free() is called either by the cleanup method of the tty or by the usb disconnect method. In the former case, the usb_disconnect() has been already called and the sysfs group associated to the device has been removed. By calling tty_unregister directly from the usb_disconnect() method, we avoid a warning due to the removal of the sysfs group of the usb device. Example of warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 778 at fs/sysfs/group.c:225 sysfs_remove_group+0x50/0x94() sysfs group c0645a88 not found for kobject 'ttyHS5' Modules linked in: CPU: 0 PID: 778 Comm: kworker/0:3 Tainted: G W 3.18.0+ #105 Workqueue: events release_one_tty [<c000dfe4>] (unwind_backtrace) from [<c000c014>] (show_stack+0x14/0x1c) [<c000c014>] (show_stack) from [<c0016bac>] (warn_slowpath_common+0x5c/0x7c) [<c0016bac>] (warn_slowpath_common) from [<c0016c60>] (warn_slowpath_fmt+0x30/0x40) [<c0016c60>] (warn_slowpath_fmt) from [<c00ddd14>] (sysfs_remove_group+0x50/0x94) [<c00ddd14>] (sysfs_remove_group) from [<c0221e44>] (device_del+0x30/0x190) [<c0221e44>] (device_del) from [<c0221fb0>] (device_unregister+0xc/0x18) [<c0221fb0>] (device_unregister) from [<c0221fec>] (device_destroy+0x30/0x3c) [<c0221fec>] (device_destroy) from [<c01fe1dc>] (tty_unregister_device+0x2c/0x5c) [<c01fe1dc>] (tty_unregister_device) from [<c029a428>] (hso_serial_common_free+0x2c/0x88) [<c029a428>] (hso_serial_common_free) from [<c029a4c0>] (hso_serial_ref_free+0x3c/0xb8) [<c029a4c0>] (hso_serial_ref_free) from [<c01ff430>] (release_one_tty+0x30/0x84) [<c01ff430>] (release_one_tty) from [<c00271d4>] (process_one_work+0x21c/0x3c8) [<c00271d4>] (process_one_work) from [<c0027758>] (worker_thread+0x3d8/0x560) [<c0027758>] (worker_thread) from [<c002be4c>] (kthread+0xc0/0xcc) [<c002be4c>] (kthread) from [<c0009630>] (ret_from_fork+0x14/0x24) ---[ end trace cb88537fdc8fa208 ]--- Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 12:22:00 +00:00
hso_serial_tty_unregister(serial);
hso_serial_common_free(serial);
exit:
hso_free_tiomget(serial);
kfree(serial);
kfree(hso_dev);
return NULL;
}
/* Creates a multiplexed AT channel */
static
struct hso_device *hso_create_mux_serial_device(struct usb_interface *interface,
int port,
struct hso_shared_int *mux)
{
struct hso_device *hso_dev;
struct hso_serial *serial;
int port_spec;
port_spec = HSO_INTF_MUX;
port_spec &= ~HSO_PORT_MASK;
port_spec |= hso_mux_to_port(port);
if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NO_PORT)
return NULL;
hso_dev = hso_create_device(interface, port_spec);
if (!hso_dev)
return NULL;
serial = kzalloc(sizeof(*serial), GFP_KERNEL);
if (!serial)
goto exit;
hso_dev->port_data.dev_serial = serial;
serial->parent = hso_dev;
if (hso_serial_common_create
(serial, 1, CTRL_URB_RX_SIZE, CTRL_URB_TX_SIZE))
goto exit;
serial->tx_data_length--;
serial->write_data = hso_mux_serial_write_data;
serial->shared_int = mux;
mutex_lock(&serial->shared_int->shared_int_lock);
serial->shared_int->ref_count++;
mutex_unlock(&serial->shared_int->shared_int_lock);
/* and record this serial */
set_serial_by_index(serial->minor, serial);
/* setup the proc dirs and files if needed */
hso_log_port(hso_dev);
/* done, return it */
return hso_dev;
exit:
if (serial) {
tty_unregister_device(tty_drv, serial->minor);
kfree(serial);
}
kfree(hso_dev);
return NULL;
}
static void hso_free_shared_int(struct hso_shared_int *mux)
{
usb_free_urb(mux->shared_intr_urb);
kfree(mux->shared_intr_buf);
mutex_unlock(&mux->shared_int_lock);
kfree(mux);
}
static
struct hso_shared_int *hso_create_shared_int(struct usb_interface *interface)
{
struct hso_shared_int *mux = kzalloc(sizeof(*mux), GFP_KERNEL);
if (!mux)
return NULL;
mux->intr_endp = hso_get_ep(interface, USB_ENDPOINT_XFER_INT,
USB_DIR_IN);
if (!mux->intr_endp) {
dev_err(&interface->dev, "Can't find INT IN endpoint\n");
goto exit;
}
mux->shared_intr_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!mux->shared_intr_urb)
goto exit;
mux->shared_intr_buf =
kzalloc(le16_to_cpu(mux->intr_endp->wMaxPacketSize),
GFP_KERNEL);
if (!mux->shared_intr_buf)
goto exit;
mutex_init(&mux->shared_int_lock);
return mux;
exit:
kfree(mux->shared_intr_buf);
usb_free_urb(mux->shared_intr_urb);
kfree(mux);
return NULL;
}
/* Gets the port spec for a certain interface */
static int hso_get_config_data(struct usb_interface *interface)
{
struct usb_device *usbdev = interface_to_usbdev(interface);
u8 *config_data = kmalloc(17, GFP_KERNEL);
u32 if_num = interface->cur_altsetting->desc.bInterfaceNumber;
s32 result;
if (!config_data)
return -ENOMEM;
if (usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0),
0x86, 0xC0, 0, 0, config_data, 17,
USB_CTRL_SET_TIMEOUT) != 0x11) {
kfree(config_data);
return -EIO;
}
switch (config_data[if_num]) {
case 0x0:
result = 0;
break;
case 0x1:
result = HSO_PORT_DIAG;
break;
case 0x2:
result = HSO_PORT_GPS;
break;
case 0x3:
result = HSO_PORT_GPS_CONTROL;
break;
case 0x4:
result = HSO_PORT_APP;
break;
case 0x5:
result = HSO_PORT_APP2;
break;
case 0x6:
result = HSO_PORT_CONTROL;
break;
case 0x7:
result = HSO_PORT_NETWORK;
break;
case 0x8:
result = HSO_PORT_MODEM;
break;
case 0x9:
result = HSO_PORT_MSD;
break;
case 0xa:
result = HSO_PORT_PCSC;
break;
case 0xb:
result = HSO_PORT_VOICE;
break;
default:
result = 0;
}
if (result)
result |= HSO_INTF_BULK;
if (config_data[16] & 0x1)
result |= HSO_INFO_CRC_BUG;
kfree(config_data);
return result;
}
/* called once for each interface upon device insertion */
static int hso_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
int mux, i, if_num, port_spec;
unsigned char port_mask;
struct hso_device *hso_dev = NULL;
struct hso_shared_int *shared_int;
struct hso_device *tmp_dev = NULL;
if (interface->cur_altsetting->desc.bInterfaceClass != 0xFF) {
dev_err(&interface->dev, "Not our interface\n");
return -ENODEV;
}
if_num = interface->cur_altsetting->desc.bInterfaceNumber;
/* Get the interface/port specification from either driver_info or from
* the device itself */
if (id->driver_info)
port_spec = ((u32 *)(id->driver_info))[if_num];
else
port_spec = hso_get_config_data(interface);
/* Check if we need to switch to alt interfaces prior to port
* configuration */
if (interface->num_altsetting > 1)
usb_set_interface(interface_to_usbdev(interface), if_num, 1);
interface->needs_remote_wakeup = 1;
/* Allocate new hso device(s) */
switch (port_spec & HSO_INTF_MASK) {
case HSO_INTF_MUX:
if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
/* Create the network device */
if (!disable_net) {
hso_dev = hso_create_net_device(interface,
port_spec);
if (!hso_dev)
goto exit;
tmp_dev = hso_dev;
}
}
if (hso_get_mux_ports(interface, &port_mask))
/* TODO: de-allocate everything */
goto exit;
shared_int = hso_create_shared_int(interface);
if (!shared_int)
goto exit;
for (i = 1, mux = 0; i < 0x100; i = i << 1, mux++) {
if (port_mask & i) {
hso_dev = hso_create_mux_serial_device(
interface, i, shared_int);
if (!hso_dev)
goto exit;
}
}
if (tmp_dev)
hso_dev = tmp_dev;
break;
case HSO_INTF_BULK:
/* It's a regular bulk interface */
if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
if (!disable_net)
hso_dev =
hso_create_net_device(interface, port_spec);
} else {
hso_dev =
hso_create_bulk_serial_device(interface, port_spec);
}
if (!hso_dev)
goto exit;
break;
default:
goto exit;
}
/* save our data pointer in this device */
usb_set_intfdata(interface, hso_dev);
/* done */
return 0;
exit:
hso_free_interface(interface);
return -ENODEV;
}
/* device removed, cleaning up */
static void hso_disconnect(struct usb_interface *interface)
{
hso_free_interface(interface);
/* remove reference of our private data */
usb_set_intfdata(interface, NULL);
}
static void async_get_intf(struct work_struct *data)
{
struct hso_device *hso_dev =
container_of(data, struct hso_device, async_get_intf);
usb_autopm_get_interface(hso_dev->interface);
}
static void async_put_intf(struct work_struct *data)
{
struct hso_device *hso_dev =
container_of(data, struct hso_device, async_put_intf);
usb_autopm_put_interface(hso_dev->interface);
}
static int hso_get_activity(struct hso_device *hso_dev)
{
if (hso_dev->usb->state == USB_STATE_SUSPENDED) {
if (!hso_dev->is_active) {
hso_dev->is_active = 1;
schedule_work(&hso_dev->async_get_intf);
}
}
if (hso_dev->usb->state != USB_STATE_CONFIGURED)
return -EAGAIN;
usb_mark_last_busy(hso_dev->usb);
return 0;
}
static int hso_put_activity(struct hso_device *hso_dev)
{
if (hso_dev->usb->state != USB_STATE_SUSPENDED) {
if (hso_dev->is_active) {
hso_dev->is_active = 0;
schedule_work(&hso_dev->async_put_intf);
return -EAGAIN;
}
}
hso_dev->is_active = 0;
return 0;
}
/* called by kernel when we need to suspend device */
static int hso_suspend(struct usb_interface *iface, pm_message_t message)
{
int i, result;
/* Stop all serial ports */
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
if (serial_table[i] && (serial_table[i]->interface == iface)) {
result = hso_stop_serial_device(serial_table[i]);
if (result)
goto out;
}
}
/* Stop all network ports */
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
if (network_table[i] &&
(network_table[i]->interface == iface)) {
result = hso_stop_net_device(network_table[i]);
if (result)
goto out;
}
}
out:
return 0;
}
/* called by kernel when we need to resume device */
static int hso_resume(struct usb_interface *iface)
{
int i, result = 0;
struct hso_net *hso_net;
/* Start all serial ports */
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
if (serial_table[i] && (serial_table[i]->interface == iface)) {
if (dev2ser(serial_table[i])->port.count) {
result =
hso_start_serial_device(serial_table[i], GFP_NOIO);
hso_kick_transmit(dev2ser(serial_table[i]));
if (result)
goto out;
}
}
}
/* Start all network ports */
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
if (network_table[i] &&
(network_table[i]->interface == iface)) {
hso_net = dev2net(network_table[i]);
if (hso_net->flags & IFF_UP) {
/* First transmit any lingering data,
then restart the device. */
if (hso_net->skb_tx_buf) {
dev_dbg(&iface->dev,
"Transmitting"
" lingering data\n");
hso_net_start_xmit(hso_net->skb_tx_buf,
hso_net->net);
hso_net->skb_tx_buf = NULL;
}
result = hso_start_net_device(network_table[i]);
if (result)
goto out;
}
}
}
out:
return result;
}
static void hso_serial_ref_free(struct kref *ref)
{
struct hso_device *hso_dev = container_of(ref, struct hso_device, ref);
hso_free_serial_device(hso_dev);
}
static void hso_free_interface(struct usb_interface *interface)
{
struct hso_serial *serial;
int i;
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++) {
if (serial_table[i] &&
(serial_table[i]->interface == interface)) {
serial = dev2ser(serial_table[i]);
tty_port_tty_hangup(&serial->port, false);
mutex_lock(&serial->parent->mutex);
serial->parent->usb_gone = 1;
mutex_unlock(&serial->parent->mutex);
cancel_work_sync(&serial_table[i]->async_put_intf);
cancel_work_sync(&serial_table[i]->async_get_intf);
hso: move tty_unregister outside hso_serial_common_free() The function hso_serial_common_free() is called either by the cleanup method of the tty or by the usb disconnect method. In the former case, the usb_disconnect() has been already called and the sysfs group associated to the device has been removed. By calling tty_unregister directly from the usb_disconnect() method, we avoid a warning due to the removal of the sysfs group of the usb device. Example of warning: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 778 at fs/sysfs/group.c:225 sysfs_remove_group+0x50/0x94() sysfs group c0645a88 not found for kobject 'ttyHS5' Modules linked in: CPU: 0 PID: 778 Comm: kworker/0:3 Tainted: G W 3.18.0+ #105 Workqueue: events release_one_tty [<c000dfe4>] (unwind_backtrace) from [<c000c014>] (show_stack+0x14/0x1c) [<c000c014>] (show_stack) from [<c0016bac>] (warn_slowpath_common+0x5c/0x7c) [<c0016bac>] (warn_slowpath_common) from [<c0016c60>] (warn_slowpath_fmt+0x30/0x40) [<c0016c60>] (warn_slowpath_fmt) from [<c00ddd14>] (sysfs_remove_group+0x50/0x94) [<c00ddd14>] (sysfs_remove_group) from [<c0221e44>] (device_del+0x30/0x190) [<c0221e44>] (device_del) from [<c0221fb0>] (device_unregister+0xc/0x18) [<c0221fb0>] (device_unregister) from [<c0221fec>] (device_destroy+0x30/0x3c) [<c0221fec>] (device_destroy) from [<c01fe1dc>] (tty_unregister_device+0x2c/0x5c) [<c01fe1dc>] (tty_unregister_device) from [<c029a428>] (hso_serial_common_free+0x2c/0x88) [<c029a428>] (hso_serial_common_free) from [<c029a4c0>] (hso_serial_ref_free+0x3c/0xb8) [<c029a4c0>] (hso_serial_ref_free) from [<c01ff430>] (release_one_tty+0x30/0x84) [<c01ff430>] (release_one_tty) from [<c00271d4>] (process_one_work+0x21c/0x3c8) [<c00271d4>] (process_one_work) from [<c0027758>] (worker_thread+0x3d8/0x560) [<c0027758>] (worker_thread) from [<c002be4c>] (kthread+0xc0/0xcc) [<c002be4c>] (kthread) from [<c0009630>] (ret_from_fork+0x14/0x24) ---[ end trace cb88537fdc8fa208 ]--- Signed-off-by: Olivier Sobrie <olivier@sobrie.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-30 12:22:00 +00:00
hso_serial_tty_unregister(serial);
kref_put(&serial_table[i]->ref, hso_serial_ref_free);
set_serial_by_index(i, NULL);
}
}
for (i = 0; i < HSO_MAX_NET_DEVICES; i++) {
if (network_table[i] &&
(network_table[i]->interface == interface)) {
struct rfkill *rfk = dev2net(network_table[i])->rfkill;
/* hso_stop_net_device doesn't stop the net queue since
* traffic needs to start it again when suspended */
netif_stop_queue(dev2net(network_table[i])->net);
hso_stop_net_device(network_table[i]);
cancel_work_sync(&network_table[i]->async_put_intf);
cancel_work_sync(&network_table[i]->async_get_intf);
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 11:01:37 +00:00
if (rfk) {
rfkill_unregister(rfk);
rfkill: rewrite This patch completely rewrites the rfkill core to address the following deficiencies: * all rfkill drivers need to implement polling where necessary rather than having one central implementation * updating the rfkill state cannot be done from arbitrary contexts, forcing drivers to use schedule_work and requiring lots of code * rfkill drivers need to keep track of soft/hard blocked internally -- the core should do this * the rfkill API has many unexpected quirks, for example being asymmetric wrt. alloc/free and register/unregister * rfkill can call back into a driver from within a function the driver called -- this is prone to deadlocks and generally should be avoided * rfkill-input pointlessly is a separate module * drivers need to #ifdef rfkill functions (unless they want to depend on or select RFKILL) -- rfkill should provide inlines that do nothing if it isn't compiled in * the rfkill structure is not opaque -- drivers need to initialise it correctly (lots of sanity checking code required) -- instead force drivers to pass the right variables to rfkill_alloc() * the documentation is hard to read because it always assumes the reader is completely clueless and contains way TOO MANY CAPS * the rfkill code needlessly uses a lot of locks and atomic operations in locked sections * fix LED trigger to actually change the LED when the radio state changes -- this wasn't done before Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> [thinkpad] Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-06-02 11:01:37 +00:00
rfkill_destroy(rfk);
}
hso_free_net_device(network_table[i]);
}
}
}
/* Helper functions */
/* Get the endpoint ! */
static struct usb_endpoint_descriptor *hso_get_ep(struct usb_interface *intf,
int type, int dir)
{
int i;
struct usb_host_interface *iface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endp;
for (i = 0; i < iface->desc.bNumEndpoints; i++) {
endp = &iface->endpoint[i].desc;
if (((endp->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == dir) &&
drivers/net/usb: use USB API functions rather than constants This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC In drivers/net/wireless/zd1211rw/zd_usb.c the code: (endpoint->bEndpointAddress & USB_TYPE_MASK) == USB_DIR_OUT is suspicious. If it is intended to use USB_ENDPOINT_DIR_MASK rather than USB_TYPE_MASK, then the whole conditional test could be converted to a call to usb_endpoint_is_bulk_in. An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-29 00:21:07 +00:00
(usb_endpoint_type(endp) == type))
return endp;
}
return NULL;
}
/* Get the byte that describes which ports are enabled */
static int hso_get_mux_ports(struct usb_interface *intf, unsigned char *ports)
{
int i;
struct usb_host_interface *iface = intf->cur_altsetting;
if (iface->extralen == 3) {
*ports = iface->extra[2];
return 0;
}
for (i = 0; i < iface->desc.bNumEndpoints; i++) {
if (iface->endpoint[i].extralen == 3) {
*ports = iface->endpoint[i].extra[2];
return 0;
}
}
return -1;
}
/* interrupt urb needs to be submitted, used for serial read of muxed port */
static int hso_mux_submit_intr_urb(struct hso_shared_int *shared_int,
struct usb_device *usb, gfp_t gfp)
{
int result;
usb_fill_int_urb(shared_int->shared_intr_urb, usb,
usb_rcvintpipe(usb,
shared_int->intr_endp->bEndpointAddress & 0x7F),
shared_int->shared_intr_buf,
1,
intr_callback, shared_int,
shared_int->intr_endp->bInterval);
result = usb_submit_urb(shared_int->shared_intr_urb, gfp);
if (result)
dev_warn(&usb->dev, "%s failed mux_intr_urb %d\n", __func__,
result);
return result;
}
/* operations setup of the serial interface */
static const struct tty_operations hso_serial_ops = {
.open = hso_serial_open,
.close = hso_serial_close,
.write = hso_serial_write,
.write_room = hso_serial_write_room,
.cleanup = hso_serial_cleanup,
.ioctl = hso_serial_ioctl,
.set_termios = hso_serial_set_termios,
.chars_in_buffer = hso_serial_chars_in_buffer,
.tiocmget = hso_serial_tiocmget,
.tiocmset = hso_serial_tiocmset,
.get_icount = hso_get_count,
.unthrottle = hso_unthrottle
};
static struct usb_driver hso_driver = {
.name = driver_name,
.probe = hso_probe,
.disconnect = hso_disconnect,
.id_table = hso_ids,
.suspend = hso_suspend,
.resume = hso_resume,
.reset_resume = hso_resume,
.supports_autosuspend = 1,
USB: Disable hub-initiated LPM for comms devices. Hub-initiated LPM is not good for USB communications devices. Comms devices should be able to tell when their link can go into a lower power state, because they know when an incoming transmission is finished. Ideally, these devices would slam their links into a lower power state, using the device-initiated LPM, after finishing the last packet of their data transfer. If we enable the idle timeouts for the parent hubs to enable hub-initiated LPM, we will get a lot of useless LPM packets on the bus as the devices reject LPM transitions when they're in the middle of receiving data. Worse, some devices might blindly accept the hub-initiated LPM and power down their radios while they're in the middle of receiving a transmission. The Intel Windows folks are disabling hub-initiated LPM for all USB communications devices under a xHCI USB 3.0 host. In order to keep the Linux behavior as close as possible to Windows, we need to do the same in Linux. Set the disable_hub_initiated_lpm flag for for all USB communications drivers. I know there aren't currently any USB 3.0 devices that implement these class specifications, but we should be ready if they do. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jan Dumon <j.dumon@option.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Kan Yan <kanyan@broadcom.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Herton Ronaldo Krzesinski <herton@canonical.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-04-23 17:08:51 +00:00
.disable_hub_initiated_lpm = 1,
};
static int __init hso_init(void)
{
int i;
int result;
/* put it in the log */
pr_info("%s\n", version);
/* Initialise the serial table semaphore and table */
spin_lock_init(&serial_table_lock);
for (i = 0; i < HSO_SERIAL_TTY_MINORS; i++)
serial_table[i] = NULL;
/* allocate our driver using the proper amount of supported minors */
tty_drv = alloc_tty_driver(HSO_SERIAL_TTY_MINORS);
if (!tty_drv)
return -ENOMEM;
/* fill in all needed values */
tty_drv->driver_name = driver_name;
tty_drv->name = tty_filename;
/* if major number is provided as parameter, use that one */
if (tty_major)
tty_drv->major = tty_major;
tty_drv->minor_start = 0;
tty_drv->type = TTY_DRIVER_TYPE_SERIAL;
tty_drv->subtype = SERIAL_TYPE_NORMAL;
tty_drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
tty_drv->init_termios = tty_std_termios;
hso_init_termios(&tty_drv->init_termios);
tty_set_operations(tty_drv, &hso_serial_ops);
/* register the tty driver */
result = tty_register_driver(tty_drv);
if (result) {
pr_err("%s - tty_register_driver failed(%d)\n",
__func__, result);
goto err_free_tty;
}
/* register this module as an usb driver */
result = usb_register(&hso_driver);
if (result) {
pr_err("Could not register hso driver - error: %d\n", result);
goto err_unreg_tty;
}
/* done */
return 0;
err_unreg_tty:
tty_unregister_driver(tty_drv);
err_free_tty:
put_tty_driver(tty_drv);
return result;
}
static void __exit hso_exit(void)
{
pr_info("unloaded\n");
tty_unregister_driver(tty_drv);
/* deregister the usb driver */
usb_deregister(&hso_driver);
net: hso: fix module unloading keep tty driver until usb driver is unregistered rmmod hso produces traces like this without that: [40261.645904] usb 2-2: new high-speed USB device number 2 using ehci-omap [40261.854644] usb 2-2: New USB device found, idVendor=0af0, idProduct=8800 [40261.862609] usb 2-2: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [40261.872772] usb 2-2: Product: Globetrotter HSUPA Modem [40261.880279] usb 2-2: Manufacturer: Option N.V. [40262.021270] hso 2-2:1.5: Not our interface [40265.556945] hso: unloaded [40265.559875] usbcore: deregistering interface driver hso [40265.595947] Unable to handle kernel NULL pointer dereference at virtual address 00000033 [40265.604522] pgd = ecb14000 [40265.611877] [00000033] *pgd=00000000 [40265.617034] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [40265.622650] Modules linked in: hso(-) bnep bluetooth ipv6 arc4 twl4030_madc_hwmon wl18xx wlcore mac80211 cfg80211 snd_soc_simple_card snd_soc_simple_card_utils snd_soc_omap_twl4030 snd_soc_gtm601 generic_adc_battery extcon_gpio omap3_isp videobuf2_dma_contig videobuf2_memops wlcore_sdio videobuf2_v4l2 videobuf2_core ov9650 bmp280_i2c v4l2_common bmp280 bmg160_i2c bmg160_core at24 nvmem_core videodev bmc150_accel_i2c bmc150_magn_i2c media bmc150_accel_core tsc2007 bmc150_magn leds_tca6507 bno055 snd_soc_omap_mcbsp industrialio_triggered_buffer snd_soc_omap kfifo_buf snd_pcm_dmaengine gpio_twl4030 snd_soc_twl4030 twl4030_vibra twl4030_madc wwan_on_off ehci_omap pwm_bl pwm_omap_dmtimer panel_tpo_td028ttec1 encoder_opa362 connector_analog_tv omapdrm drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect [40265.698211] sysimgblt fb_sys_fops cfbcopyarea drm omapdss usb_f_ecm g_ether usb_f_rndis u_ether libcomposite configfs omap2430 phy_twl4030_usb musb_hdrc twl4030_charger industrialio w2sg0004 twl4030_pwrbutton bq27xxx_battery w1_bq27000 omap_hdq [last unloaded: hso] [40265.723175] CPU: 0 PID: 2701 Comm: rmmod Not tainted 4.11.0-rc6-letux+ #6 [40265.730346] Hardware name: Generic OMAP36xx (Flattened Device Tree) [40265.736938] task: ecb81100 task.stack: ecb82000 [40265.741729] PC is at cdev_del+0xc/0x2c [40265.745666] LR is at tty_unregister_device+0x40/0x50 [40265.750915] pc : [<c027472c>] lr : [<c04b3ecc>] psr: 600b0113 sp : ecb83ea8 ip : eca4f898 fp : 00000000 [40265.763000] r10: 00000000 r9 : 00000000 r8 : 00000001 [40265.768493] r7 : eca4f800 r6 : 00000003 r5 : 00000000 r4 : ffffffff [40265.775360] r3 : c1458d54 r2 : 00000000 r1 : 00000004 r0 : ffffffff [40265.782257] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [40265.789764] Control: 10c5387d Table: acb14019 DAC: 00000051 [40265.795806] Process rmmod (pid: 2701, stack limit = 0xecb82218) [40265.802062] Stack: (0xecb83ea8 to 0xecb84000) [40265.806640] 3ea0: ec9e8100 c04b3ecc bf737378 ed5b7c00 00000003 bf7327ec [40265.815277] 3ec0: eca4f800 00000000 ec9fd800 eca4f800 bf737070 bf7328bc eca4f820 c05a9a04 [40265.823883] 3ee0: eca4f820 00000000 00000001 eca4f820 ec9fd870 bf737070 eca4f854 ec9fd8a4 [40265.832519] 3f00: ecb82000 00000000 00000000 c04e6960 eca4f820 bf737070 bf737048 00000081 [40265.841125] 3f20: c01071e4 c04e6a60 ecb81100 bf737070 bf737070 c04e5d94 bf737020 c05a8f88 [40265.849731] 3f40: bf737100 00000800 7f5fa254 00000081 c01071e4 c01c4afc 00000000 006f7368 [40265.858367] 3f60: ecb815f4 00000000 c0cac9c4 c01071e4 ecb82000 00000000 00000000 c01512f4 [40265.866973] 3f80: ed5b3200 c01071e4 7f5fa220 7f5fa220 bea78ec9 0010711c 7f5fa220 7f5fa220 [40265.875579] 3fa0: bea78ec9 c0107040 7f5fa220 7f5fa220 7f5fa254 00000800 dd35b800 dd35b800 [40265.884216] 3fc0: 7f5fa220 7f5fa220 bea78ec9 00000081 bea78dcc 00000000 bea78bd8 00000000 [40265.892822] 3fe0: b6f70521 bea78b6c 7f5dd613 b6f70526 80070030 7f5fa254 ffffffff ffffffff [40265.901458] [<c027472c>] (cdev_del) from [<c04b3ecc>] (tty_unregister_device+0x40/0x50) [40265.909942] [<c04b3ecc>] (tty_unregister_device) from [<bf7327ec>] (hso_free_interface+0x80/0x144 [hso]) [40265.919982] [<bf7327ec>] (hso_free_interface [hso]) from [<bf7328bc>] (hso_disconnect+0xc/0x18 [hso]) [40265.929718] [<bf7328bc>] (hso_disconnect [hso]) from [<c05a9a04>] (usb_unbind_interface+0x84/0x200) [40265.939239] [<c05a9a04>] (usb_unbind_interface) from [<c04e6960>] (device_release_driver_internal+0x138/0x1cc) [40265.949798] [<c04e6960>] (device_release_driver_internal) from [<c04e6a60>] (driver_detach+0x60/0x6c) [40265.959503] [<c04e6a60>] (driver_detach) from [<c04e5d94>] (bus_remove_driver+0x64/0x8c) [40265.968017] [<c04e5d94>] (bus_remove_driver) from [<c05a8f88>] (usb_deregister+0x5c/0xb8) [40265.976654] [<c05a8f88>] (usb_deregister) from [<c01c4afc>] (SyS_delete_module+0x160/0x1dc) [40265.985443] [<c01c4afc>] (SyS_delete_module) from [<c0107040>] (ret_fast_syscall+0x0/0x1c) [40265.994171] Code: c1458d54 e59f3020 e92d4010 e1a04000 (e5941034) [40266.016693] ---[ end trace 9d5ac43c7e41075c ]--- Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-24 19:18:39 +00:00
put_tty_driver(tty_drv);
}
/* Module definitions */
module_init(hso_init);
module_exit(hso_exit);
MODULE_AUTHOR(MOD_AUTHOR);
MODULE_DESCRIPTION(MOD_DESCRIPTION);
MODULE_LICENSE("GPL");
/* change the debug level (eg: insmod hso.ko debug=0x04) */
MODULE_PARM_DESC(debug, "debug level mask [0x01 | 0x02 | 0x04 | 0x08 | 0x10]");
module_param(debug, int, S_IRUGO | S_IWUSR);
/* set the major tty number (eg: insmod hso.ko tty_major=245) */
MODULE_PARM_DESC(tty_major, "Set the major tty number");
module_param(tty_major, int, S_IRUGO | S_IWUSR);
/* disable network interface (eg: insmod hso.ko disable_net=1) */
MODULE_PARM_DESC(disable_net, "Disable the network interface");
module_param(disable_net, int, S_IRUGO | S_IWUSR);