DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
/*
|
|
|
|
* Copyright © 2006-2008 Intel Corporation
|
|
|
|
* Jesse Barnes <jesse.barnes@intel.com>
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice (including the next
|
|
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
|
|
* Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
|
|
* DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* Authors:
|
|
|
|
* Eric Anholt <eric@anholt.net>
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** @file
|
|
|
|
* Integrated TV-out support for the 915GM and 945GM.
|
|
|
|
*/
|
|
|
|
|
2012-10-02 17:01:07 +00:00
|
|
|
#include <drm/drmP.h>
|
2015-01-23 00:50:32 +00:00
|
|
|
#include <drm/drm_atomic_helper.h>
|
2012-10-02 17:01:07 +00:00
|
|
|
#include <drm/drm_crtc.h>
|
|
|
|
#include <drm/drm_edid.h>
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
#include "intel_drv.h"
|
2012-10-02 17:01:07 +00:00
|
|
|
#include <drm/i915_drm.h>
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
#include "i915_drv.h"
|
|
|
|
|
|
|
|
enum tv_margin {
|
|
|
|
TV_MARGIN_LEFT, TV_MARGIN_TOP,
|
|
|
|
TV_MARGIN_RIGHT, TV_MARGIN_BOTTOM
|
|
|
|
};
|
|
|
|
|
|
|
|
/** Private structure for the integrated TV support */
|
2010-08-04 12:50:23 +00:00
|
|
|
struct intel_tv {
|
|
|
|
struct intel_encoder base;
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
int type;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct video_levels {
|
2016-10-13 10:09:26 +00:00
|
|
|
u16 blank, black;
|
|
|
|
u8 burst;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct color_conversion {
|
|
|
|
u16 ry, gy, by, ay;
|
|
|
|
u16 ru, gu, bu, au;
|
|
|
|
u16 rv, gv, bv, av;
|
|
|
|
};
|
|
|
|
|
|
|
|
static const u32 filter_table[] = {
|
|
|
|
0xB1403000, 0x2E203500, 0x35002E20, 0x3000B140,
|
|
|
|
0x35A0B160, 0x2DC02E80, 0xB1403480, 0xB1603000,
|
|
|
|
0x2EA03640, 0x34002D80, 0x3000B120, 0x36E0B160,
|
|
|
|
0x2D202EF0, 0xB1203380, 0xB1603000, 0x2F303780,
|
|
|
|
0x33002CC0, 0x3000B100, 0x3820B160, 0x2C802F50,
|
|
|
|
0xB10032A0, 0xB1603000, 0x2F9038C0, 0x32202C20,
|
|
|
|
0x3000B0E0, 0x3980B160, 0x2BC02FC0, 0xB0E031C0,
|
|
|
|
0xB1603000, 0x2FF03A20, 0x31602B60, 0xB020B0C0,
|
|
|
|
0x3AE0B160, 0x2B001810, 0xB0C03120, 0xB140B020,
|
|
|
|
0x18283BA0, 0x30C02A80, 0xB020B0A0, 0x3C60B140,
|
|
|
|
0x2A201838, 0xB0A03080, 0xB120B020, 0x18383D20,
|
|
|
|
0x304029C0, 0xB040B080, 0x3DE0B100, 0x29601848,
|
|
|
|
0xB0803000, 0xB100B040, 0x18483EC0, 0xB0402900,
|
|
|
|
0xB040B060, 0x3F80B0C0, 0x28801858, 0xB060B080,
|
|
|
|
0xB0A0B060, 0x18602820, 0xB0A02820, 0x0000B060,
|
|
|
|
0xB1403000, 0x2E203500, 0x35002E20, 0x3000B140,
|
|
|
|
0x35A0B160, 0x2DC02E80, 0xB1403480, 0xB1603000,
|
|
|
|
0x2EA03640, 0x34002D80, 0x3000B120, 0x36E0B160,
|
|
|
|
0x2D202EF0, 0xB1203380, 0xB1603000, 0x2F303780,
|
|
|
|
0x33002CC0, 0x3000B100, 0x3820B160, 0x2C802F50,
|
|
|
|
0xB10032A0, 0xB1603000, 0x2F9038C0, 0x32202C20,
|
|
|
|
0x3000B0E0, 0x3980B160, 0x2BC02FC0, 0xB0E031C0,
|
|
|
|
0xB1603000, 0x2FF03A20, 0x31602B60, 0xB020B0C0,
|
|
|
|
0x3AE0B160, 0x2B001810, 0xB0C03120, 0xB140B020,
|
|
|
|
0x18283BA0, 0x30C02A80, 0xB020B0A0, 0x3C60B140,
|
|
|
|
0x2A201838, 0xB0A03080, 0xB120B020, 0x18383D20,
|
|
|
|
0x304029C0, 0xB040B080, 0x3DE0B100, 0x29601848,
|
|
|
|
0xB0803000, 0xB100B040, 0x18483EC0, 0xB0402900,
|
|
|
|
0xB040B060, 0x3F80B0C0, 0x28801858, 0xB060B080,
|
|
|
|
0xB0A0B060, 0x18602820, 0xB0A02820, 0x0000B060,
|
|
|
|
0x36403000, 0x2D002CC0, 0x30003640, 0x2D0036C0,
|
|
|
|
0x35C02CC0, 0x37403000, 0x2C802D40, 0x30003540,
|
|
|
|
0x2D8037C0, 0x34C02C40, 0x38403000, 0x2BC02E00,
|
|
|
|
0x30003440, 0x2E2038C0, 0x34002B80, 0x39803000,
|
|
|
|
0x2B402E40, 0x30003380, 0x2E603A00, 0x33402B00,
|
|
|
|
0x3A803040, 0x2A802EA0, 0x30403300, 0x2EC03B40,
|
|
|
|
0x32802A40, 0x3C003040, 0x2A002EC0, 0x30803240,
|
|
|
|
0x2EC03C80, 0x320029C0, 0x3D403080, 0x29402F00,
|
|
|
|
0x308031C0, 0x2F203DC0, 0x31802900, 0x3E8030C0,
|
|
|
|
0x28802F40, 0x30C03140, 0x2F203F40, 0x31402840,
|
|
|
|
0x28003100, 0x28002F00, 0x00003100, 0x36403000,
|
|
|
|
0x2D002CC0, 0x30003640, 0x2D0036C0,
|
|
|
|
0x35C02CC0, 0x37403000, 0x2C802D40, 0x30003540,
|
|
|
|
0x2D8037C0, 0x34C02C40, 0x38403000, 0x2BC02E00,
|
|
|
|
0x30003440, 0x2E2038C0, 0x34002B80, 0x39803000,
|
|
|
|
0x2B402E40, 0x30003380, 0x2E603A00, 0x33402B00,
|
|
|
|
0x3A803040, 0x2A802EA0, 0x30403300, 0x2EC03B40,
|
|
|
|
0x32802A40, 0x3C003040, 0x2A002EC0, 0x30803240,
|
|
|
|
0x2EC03C80, 0x320029C0, 0x3D403080, 0x29402F00,
|
|
|
|
0x308031C0, 0x2F203DC0, 0x31802900, 0x3E8030C0,
|
|
|
|
0x28802F40, 0x30C03140, 0x2F203F40, 0x31402840,
|
|
|
|
0x28003100, 0x28002F00, 0x00003100,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Color conversion values have 3 separate fixed point formats:
|
|
|
|
*
|
|
|
|
* 10 bit fields (ay, au)
|
|
|
|
* 1.9 fixed point (b.bbbbbbbbb)
|
|
|
|
* 11 bit fields (ry, by, ru, gu, gv)
|
|
|
|
* exp.mantissa (ee.mmmmmmmmm)
|
|
|
|
* ee = 00 = 10^-1 (0.mmmmmmmmm)
|
|
|
|
* ee = 01 = 10^-2 (0.0mmmmmmmmm)
|
|
|
|
* ee = 10 = 10^-3 (0.00mmmmmmmmm)
|
|
|
|
* ee = 11 = 10^-4 (0.000mmmmmmmmm)
|
|
|
|
* 12 bit fields (gy, rv, bu)
|
|
|
|
* exp.mantissa (eee.mmmmmmmmm)
|
|
|
|
* eee = 000 = 10^-1 (0.mmmmmmmmm)
|
|
|
|
* eee = 001 = 10^-2 (0.0mmmmmmmmm)
|
|
|
|
* eee = 010 = 10^-3 (0.00mmmmmmmmm)
|
|
|
|
* eee = 011 = 10^-4 (0.000mmmmmmmmm)
|
|
|
|
* eee = 100 = reserved
|
|
|
|
* eee = 101 = reserved
|
|
|
|
* eee = 110 = reserved
|
|
|
|
* eee = 111 = 10^0 (m.mmmmmmmm) (only usable for 1.0 representation)
|
|
|
|
*
|
|
|
|
* Saturation and contrast are 8 bits, with their own representation:
|
|
|
|
* 8 bit field (saturation, contrast)
|
|
|
|
* exp.mantissa (ee.mmmmmm)
|
|
|
|
* ee = 00 = 10^-1 (0.mmmmmm)
|
|
|
|
* ee = 01 = 10^0 (m.mmmmm)
|
|
|
|
* ee = 10 = 10^1 (mm.mmmm)
|
|
|
|
* ee = 11 = 10^2 (mmm.mmm)
|
|
|
|
*
|
|
|
|
* Simple conversion function:
|
|
|
|
*
|
|
|
|
* static u32
|
|
|
|
* float_to_csc_11(float f)
|
|
|
|
* {
|
|
|
|
* u32 exp;
|
|
|
|
* u32 mant;
|
|
|
|
* u32 ret;
|
|
|
|
*
|
|
|
|
* if (f < 0)
|
|
|
|
* f = -f;
|
|
|
|
*
|
|
|
|
* if (f >= 1) {
|
|
|
|
* exp = 0x7;
|
2011-08-16 19:34:10 +00:00
|
|
|
* mant = 1 << 8;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
* } else {
|
|
|
|
* for (exp = 0; exp < 3 && f < 0.5; exp++)
|
2011-08-16 19:34:10 +00:00
|
|
|
* f *= 2.0;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
* mant = (f * (1 << 9) + 0.5);
|
|
|
|
* if (mant >= (1 << 9))
|
|
|
|
* mant = (1 << 9) - 1;
|
|
|
|
* }
|
|
|
|
* ret = (exp << 9) | mant;
|
|
|
|
* return ret;
|
|
|
|
* }
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Behold, magic numbers! If we plant them they might grow a big
|
|
|
|
* s-video cable to the sky... or something.
|
|
|
|
*
|
|
|
|
* Pre-converted to appropriate hex value.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* PAL & NTSC values for composite & s-video connections
|
|
|
|
*/
|
|
|
|
static const struct color_conversion ntsc_m_csc_composite = {
|
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104,
|
2009-03-04 12:23:02 +00:00
|
|
|
.ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0200,
|
|
|
|
.rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels ntsc_m_levels_composite = {
|
|
|
|
.blank = 225, .black = 267, .burst = 113,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct color_conversion ntsc_m_csc_svideo = {
|
2009-03-04 12:23:02 +00:00
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0133,
|
|
|
|
.ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0200,
|
|
|
|
.rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels ntsc_m_levels_svideo = {
|
|
|
|
.blank = 266, .black = 316, .burst = 133,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct color_conversion ntsc_j_csc_composite = {
|
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0119,
|
2009-03-04 12:23:02 +00:00
|
|
|
.ru = 0x074c, .gu = 0x0546, .bu = 0x05ec, .au = 0x0200,
|
|
|
|
.rv = 0x035a, .gv = 0x0322, .bv = 0x06e1, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels ntsc_j_levels_composite = {
|
|
|
|
.blank = 225, .black = 225, .burst = 113,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct color_conversion ntsc_j_csc_svideo = {
|
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x014c,
|
2009-03-04 12:23:02 +00:00
|
|
|
.ru = 0x0788, .gu = 0x0581, .bu = 0x0322, .au = 0x0200,
|
|
|
|
.rv = 0x0399, .gv = 0x0356, .bv = 0x070a, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels ntsc_j_levels_svideo = {
|
|
|
|
.blank = 266, .black = 266, .burst = 133,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct color_conversion pal_csc_composite = {
|
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0113,
|
2009-03-04 12:23:02 +00:00
|
|
|
.ru = 0x0745, .gu = 0x053f, .bu = 0x05e1, .au = 0x0200,
|
|
|
|
.rv = 0x0353, .gv = 0x031c, .bv = 0x06dc, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels pal_levels_composite = {
|
|
|
|
.blank = 237, .black = 237, .burst = 118,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct color_conversion pal_csc_svideo = {
|
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0145,
|
2009-03-04 12:23:02 +00:00
|
|
|
.ru = 0x0780, .gu = 0x0579, .bu = 0x031c, .au = 0x0200,
|
|
|
|
.rv = 0x0390, .gv = 0x034f, .bv = 0x0705, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels pal_levels_svideo = {
|
|
|
|
.blank = 280, .black = 280, .burst = 139,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct color_conversion pal_m_csc_composite = {
|
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104,
|
2009-03-04 12:23:02 +00:00
|
|
|
.ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0200,
|
|
|
|
.rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels pal_m_levels_composite = {
|
|
|
|
.blank = 225, .black = 267, .burst = 113,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct color_conversion pal_m_csc_svideo = {
|
2009-03-04 12:23:02 +00:00
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0133,
|
|
|
|
.ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0200,
|
|
|
|
.rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels pal_m_levels_svideo = {
|
|
|
|
.blank = 266, .black = 316, .burst = 133,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct color_conversion pal_n_csc_composite = {
|
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0104,
|
2009-03-04 12:23:02 +00:00
|
|
|
.ru = 0x0733, .gu = 0x052d, .bu = 0x05c7, .au = 0x0200,
|
|
|
|
.rv = 0x0340, .gv = 0x030c, .bv = 0x06d0, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels pal_n_levels_composite = {
|
|
|
|
.blank = 225, .black = 267, .burst = 118,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct color_conversion pal_n_csc_svideo = {
|
2009-03-04 12:23:02 +00:00
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0133,
|
|
|
|
.ru = 0x076a, .gu = 0x0564, .bu = 0x030d, .au = 0x0200,
|
|
|
|
.rv = 0x037a, .gv = 0x033d, .bv = 0x06f6, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels pal_n_levels_svideo = {
|
|
|
|
.blank = 266, .black = 316, .burst = 139,
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Component connections
|
|
|
|
*/
|
|
|
|
static const struct color_conversion sdtv_csc_yprpb = {
|
2009-03-04 12:23:02 +00:00
|
|
|
.ry = 0x0332, .gy = 0x012d, .by = 0x07d3, .ay = 0x0145,
|
|
|
|
.ru = 0x0559, .gu = 0x0353, .bu = 0x0100, .au = 0x0200,
|
|
|
|
.rv = 0x0100, .gv = 0x03ad, .bv = 0x074d, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct color_conversion hdtv_csc_yprpb = {
|
2009-03-04 12:23:02 +00:00
|
|
|
.ry = 0x05b3, .gy = 0x016e, .by = 0x0728, .ay = 0x0145,
|
|
|
|
.ru = 0x07d5, .gu = 0x038b, .bu = 0x0100, .au = 0x0200,
|
|
|
|
.rv = 0x0100, .gv = 0x03d1, .bv = 0x06bc, .av = 0x0200,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct video_levels component_levels = {
|
|
|
|
.blank = 279, .black = 279, .burst = 0,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
struct tv_mode {
|
2010-09-04 23:52:34 +00:00
|
|
|
const char *name;
|
2016-10-13 10:09:26 +00:00
|
|
|
|
|
|
|
u32 clock;
|
|
|
|
u16 refresh; /* in millihertz (for precision) */
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
u32 oversample;
|
2016-10-13 10:09:26 +00:00
|
|
|
u8 hsync_end;
|
|
|
|
u16 hblank_start, hblank_end, htotal;
|
|
|
|
bool progressive : 1, trilevel_sync : 1, component_only : 1;
|
|
|
|
u8 vsync_start_f1, vsync_start_f2, vsync_len;
|
|
|
|
bool veq_ena : 1;
|
|
|
|
u8 veq_start_f1, veq_start_f2, veq_len;
|
|
|
|
u8 vi_end_f1, vi_end_f2;
|
|
|
|
u16 nbr_end;
|
|
|
|
bool burst_ena : 1;
|
|
|
|
u8 hburst_start, hburst_len;
|
|
|
|
u8 vburst_start_f1;
|
|
|
|
u16 vburst_end_f1;
|
|
|
|
u8 vburst_start_f2;
|
|
|
|
u16 vburst_end_f2;
|
|
|
|
u8 vburst_start_f3;
|
|
|
|
u16 vburst_end_f3;
|
|
|
|
u8 vburst_start_f4;
|
|
|
|
u16 vburst_end_f4;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
/*
|
|
|
|
* subcarrier programming
|
|
|
|
*/
|
2016-10-13 10:09:26 +00:00
|
|
|
u16 dda2_size, dda3_size;
|
|
|
|
u8 dda1_inc;
|
|
|
|
u16 dda2_inc, dda3_inc;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
u32 sc_reset;
|
2016-10-13 10:09:26 +00:00
|
|
|
bool pal_burst : 1;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
/*
|
|
|
|
* blank/black levels
|
|
|
|
*/
|
|
|
|
const struct video_levels *composite_levels, *svideo_levels;
|
|
|
|
const struct color_conversion *composite_color, *svideo_color;
|
|
|
|
const u32 *filter_table;
|
2016-10-13 10:09:26 +00:00
|
|
|
u16 max_srcw;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Sub carrier DDA
|
|
|
|
*
|
|
|
|
* I think this works as follows:
|
|
|
|
*
|
|
|
|
* subcarrier freq = pixel_clock * (dda1_inc + dda2_inc / dda2_size) / 4096
|
|
|
|
*
|
|
|
|
* Presumably, when dda3 is added in, it gets to adjust the dda2_inc value
|
|
|
|
*
|
|
|
|
* So,
|
|
|
|
* dda1_ideal = subcarrier/pixel * 4096
|
|
|
|
* dda1_inc = floor (dda1_ideal)
|
|
|
|
* dda2 = dda1_ideal - dda1_inc
|
|
|
|
*
|
|
|
|
* then pick a ratio for dda2 that gives the closest approximation. If
|
|
|
|
* you can't get close enough, you can play with dda3 as well. This
|
|
|
|
* seems likely to happen when dda2 is small as the jumps would be larger
|
|
|
|
*
|
|
|
|
* To invert this,
|
|
|
|
*
|
|
|
|
* pixel_clock = subcarrier * 4096 / (dda1_inc + dda2_inc / dda2_size)
|
|
|
|
*
|
|
|
|
* The constants below were all computed using a 107.520MHz clock
|
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Register programming values for TV modes.
|
|
|
|
*
|
|
|
|
* These values account for -1s required.
|
|
|
|
*/
|
|
|
|
|
2009-02-09 21:02:42 +00:00
|
|
|
static const struct tv_mode tv_modes[] = {
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
|
|
|
.name = "NTSC-M",
|
2009-03-04 12:23:02 +00:00
|
|
|
.clock = 108000,
|
2011-12-14 23:10:06 +00:00
|
|
|
.refresh = 59940,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.oversample = TV_OVERSAMPLE_8X,
|
|
|
|
.component_only = 0,
|
|
|
|
/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
|
|
|
|
|
|
|
|
.hsync_end = 64, .hblank_end = 124,
|
|
|
|
.hblank_start = 836, .htotal = 857,
|
|
|
|
|
|
|
|
.progressive = false, .trilevel_sync = false,
|
|
|
|
|
|
|
|
.vsync_start_f1 = 6, .vsync_start_f2 = 7,
|
|
|
|
.vsync_len = 6,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.veq_ena = true, .veq_start_f1 = 0,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.veq_start_f2 = 1, .veq_len = 18,
|
|
|
|
|
|
|
|
.vi_end_f1 = 20, .vi_end_f2 = 21,
|
|
|
|
.nbr_end = 240,
|
|
|
|
|
|
|
|
.burst_ena = true,
|
|
|
|
.hburst_start = 72, .hburst_len = 34,
|
|
|
|
.vburst_start_f1 = 9, .vburst_end_f1 = 240,
|
|
|
|
.vburst_start_f2 = 10, .vburst_end_f2 = 240,
|
|
|
|
.vburst_start_f3 = 9, .vburst_end_f3 = 240,
|
|
|
|
.vburst_start_f4 = 10, .vburst_end_f4 = 240,
|
|
|
|
|
|
|
|
/* desired 3.5800000 actual 3.5800000 clock 107.52 */
|
2009-03-04 12:23:02 +00:00
|
|
|
.dda1_inc = 135,
|
|
|
|
.dda2_inc = 20800, .dda2_size = 27456,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.dda3_inc = 0, .dda3_size = 0,
|
|
|
|
.sc_reset = TV_SC_RESET_EVERY_4,
|
|
|
|
.pal_burst = false,
|
|
|
|
|
|
|
|
.composite_levels = &ntsc_m_levels_composite,
|
|
|
|
.composite_color = &ntsc_m_csc_composite,
|
|
|
|
.svideo_levels = &ntsc_m_levels_svideo,
|
|
|
|
.svideo_color = &ntsc_m_csc_svideo,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "NTSC-443",
|
2009-03-04 12:23:02 +00:00
|
|
|
.clock = 108000,
|
2011-12-14 23:10:06 +00:00
|
|
|
.refresh = 59940,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.oversample = TV_OVERSAMPLE_8X,
|
|
|
|
.component_only = 0,
|
|
|
|
/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */
|
|
|
|
.hsync_end = 64, .hblank_end = 124,
|
|
|
|
.hblank_start = 836, .htotal = 857,
|
|
|
|
|
|
|
|
.progressive = false, .trilevel_sync = false,
|
|
|
|
|
|
|
|
.vsync_start_f1 = 6, .vsync_start_f2 = 7,
|
|
|
|
.vsync_len = 6,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.veq_ena = true, .veq_start_f1 = 0,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.veq_start_f2 = 1, .veq_len = 18,
|
|
|
|
|
|
|
|
.vi_end_f1 = 20, .vi_end_f2 = 21,
|
|
|
|
.nbr_end = 240,
|
|
|
|
|
2010-06-06 14:40:23 +00:00
|
|
|
.burst_ena = true,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.hburst_start = 72, .hburst_len = 34,
|
|
|
|
.vburst_start_f1 = 9, .vburst_end_f1 = 240,
|
|
|
|
.vburst_start_f2 = 10, .vburst_end_f2 = 240,
|
|
|
|
.vburst_start_f3 = 9, .vburst_end_f3 = 240,
|
|
|
|
.vburst_start_f4 = 10, .vburst_end_f4 = 240,
|
|
|
|
|
|
|
|
/* desired 4.4336180 actual 4.4336180 clock 107.52 */
|
|
|
|
.dda1_inc = 168,
|
2009-03-04 12:23:02 +00:00
|
|
|
.dda2_inc = 4093, .dda2_size = 27456,
|
|
|
|
.dda3_inc = 310, .dda3_size = 525,
|
|
|
|
.sc_reset = TV_SC_RESET_NEVER,
|
|
|
|
.pal_burst = false,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
.composite_levels = &ntsc_m_levels_composite,
|
|
|
|
.composite_color = &ntsc_m_csc_composite,
|
|
|
|
.svideo_levels = &ntsc_m_levels_svideo,
|
|
|
|
.svideo_color = &ntsc_m_csc_svideo,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "NTSC-J",
|
2009-03-04 12:23:02 +00:00
|
|
|
.clock = 108000,
|
2011-12-14 23:10:06 +00:00
|
|
|
.refresh = 59940,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.oversample = TV_OVERSAMPLE_8X,
|
|
|
|
.component_only = 0,
|
|
|
|
|
|
|
|
/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
|
|
|
|
.hsync_end = 64, .hblank_end = 124,
|
|
|
|
.hblank_start = 836, .htotal = 857,
|
|
|
|
|
|
|
|
.progressive = false, .trilevel_sync = false,
|
|
|
|
|
|
|
|
.vsync_start_f1 = 6, .vsync_start_f2 = 7,
|
|
|
|
.vsync_len = 6,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.veq_ena = true, .veq_start_f1 = 0,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.veq_start_f2 = 1, .veq_len = 18,
|
|
|
|
|
|
|
|
.vi_end_f1 = 20, .vi_end_f2 = 21,
|
|
|
|
.nbr_end = 240,
|
|
|
|
|
|
|
|
.burst_ena = true,
|
|
|
|
.hburst_start = 72, .hburst_len = 34,
|
|
|
|
.vburst_start_f1 = 9, .vburst_end_f1 = 240,
|
|
|
|
.vburst_start_f2 = 10, .vburst_end_f2 = 240,
|
|
|
|
.vburst_start_f3 = 9, .vburst_end_f3 = 240,
|
|
|
|
.vburst_start_f4 = 10, .vburst_end_f4 = 240,
|
|
|
|
|
|
|
|
/* desired 3.5800000 actual 3.5800000 clock 107.52 */
|
2009-03-04 12:23:02 +00:00
|
|
|
.dda1_inc = 135,
|
|
|
|
.dda2_inc = 20800, .dda2_size = 27456,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.dda3_inc = 0, .dda3_size = 0,
|
|
|
|
.sc_reset = TV_SC_RESET_EVERY_4,
|
|
|
|
.pal_burst = false,
|
|
|
|
|
|
|
|
.composite_levels = &ntsc_j_levels_composite,
|
|
|
|
.composite_color = &ntsc_j_csc_composite,
|
|
|
|
.svideo_levels = &ntsc_j_levels_svideo,
|
|
|
|
.svideo_color = &ntsc_j_csc_svideo,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "PAL-M",
|
2009-03-04 12:23:02 +00:00
|
|
|
.clock = 108000,
|
2011-12-14 23:10:06 +00:00
|
|
|
.refresh = 59940,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.oversample = TV_OVERSAMPLE_8X,
|
|
|
|
.component_only = 0,
|
|
|
|
|
|
|
|
/* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */
|
|
|
|
.hsync_end = 64, .hblank_end = 124,
|
|
|
|
.hblank_start = 836, .htotal = 857,
|
|
|
|
|
|
|
|
.progressive = false, .trilevel_sync = false,
|
|
|
|
|
|
|
|
.vsync_start_f1 = 6, .vsync_start_f2 = 7,
|
|
|
|
.vsync_len = 6,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.veq_ena = true, .veq_start_f1 = 0,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.veq_start_f2 = 1, .veq_len = 18,
|
|
|
|
|
|
|
|
.vi_end_f1 = 20, .vi_end_f2 = 21,
|
|
|
|
.nbr_end = 240,
|
|
|
|
|
|
|
|
.burst_ena = true,
|
|
|
|
.hburst_start = 72, .hburst_len = 34,
|
|
|
|
.vburst_start_f1 = 9, .vburst_end_f1 = 240,
|
|
|
|
.vburst_start_f2 = 10, .vburst_end_f2 = 240,
|
|
|
|
.vburst_start_f3 = 9, .vburst_end_f3 = 240,
|
|
|
|
.vburst_start_f4 = 10, .vburst_end_f4 = 240,
|
|
|
|
|
|
|
|
/* desired 3.5800000 actual 3.5800000 clock 107.52 */
|
2009-03-04 12:23:02 +00:00
|
|
|
.dda1_inc = 135,
|
|
|
|
.dda2_inc = 16704, .dda2_size = 27456,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.dda3_inc = 0, .dda3_size = 0,
|
2009-03-04 12:23:02 +00:00
|
|
|
.sc_reset = TV_SC_RESET_EVERY_8,
|
|
|
|
.pal_burst = true,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
.composite_levels = &pal_m_levels_composite,
|
|
|
|
.composite_color = &pal_m_csc_composite,
|
|
|
|
.svideo_levels = &pal_m_levels_svideo,
|
|
|
|
.svideo_color = &pal_m_csc_svideo,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
/* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */
|
|
|
|
.name = "PAL-N",
|
2009-03-04 12:23:02 +00:00
|
|
|
.clock = 108000,
|
2011-12-14 23:10:06 +00:00
|
|
|
.refresh = 50000,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.oversample = TV_OVERSAMPLE_8X,
|
|
|
|
.component_only = 0,
|
|
|
|
|
|
|
|
.hsync_end = 64, .hblank_end = 128,
|
|
|
|
.hblank_start = 844, .htotal = 863,
|
|
|
|
|
|
|
|
.progressive = false, .trilevel_sync = false,
|
|
|
|
|
|
|
|
|
|
|
|
.vsync_start_f1 = 6, .vsync_start_f2 = 7,
|
|
|
|
.vsync_len = 6,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.veq_ena = true, .veq_start_f1 = 0,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.veq_start_f2 = 1, .veq_len = 18,
|
|
|
|
|
|
|
|
.vi_end_f1 = 24, .vi_end_f2 = 25,
|
|
|
|
.nbr_end = 286,
|
|
|
|
|
|
|
|
.burst_ena = true,
|
2011-08-16 19:34:10 +00:00
|
|
|
.hburst_start = 73, .hburst_len = 34,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.vburst_start_f1 = 8, .vburst_end_f1 = 285,
|
|
|
|
.vburst_start_f2 = 8, .vburst_end_f2 = 286,
|
|
|
|
.vburst_start_f3 = 9, .vburst_end_f3 = 286,
|
|
|
|
.vburst_start_f4 = 9, .vburst_end_f4 = 285,
|
|
|
|
|
|
|
|
|
|
|
|
/* desired 4.4336180 actual 4.4336180 clock 107.52 */
|
2009-03-04 12:23:02 +00:00
|
|
|
.dda1_inc = 135,
|
|
|
|
.dda2_inc = 23578, .dda2_size = 27648,
|
|
|
|
.dda3_inc = 134, .dda3_size = 625,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.sc_reset = TV_SC_RESET_EVERY_8,
|
|
|
|
.pal_burst = true,
|
|
|
|
|
|
|
|
.composite_levels = &pal_n_levels_composite,
|
|
|
|
.composite_color = &pal_n_csc_composite,
|
|
|
|
.svideo_levels = &pal_n_levels_svideo,
|
|
|
|
.svideo_color = &pal_n_csc_svideo,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
/* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */
|
|
|
|
.name = "PAL",
|
2009-03-04 12:23:02 +00:00
|
|
|
.clock = 108000,
|
2011-12-14 23:10:06 +00:00
|
|
|
.refresh = 50000,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.oversample = TV_OVERSAMPLE_8X,
|
|
|
|
.component_only = 0,
|
|
|
|
|
2009-03-04 12:23:02 +00:00
|
|
|
.hsync_end = 64, .hblank_end = 142,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.hblank_start = 844, .htotal = 863,
|
|
|
|
|
|
|
|
.progressive = false, .trilevel_sync = false,
|
|
|
|
|
|
|
|
.vsync_start_f1 = 5, .vsync_start_f2 = 6,
|
|
|
|
.vsync_len = 5,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.veq_ena = true, .veq_start_f1 = 0,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.veq_start_f2 = 1, .veq_len = 15,
|
|
|
|
|
|
|
|
.vi_end_f1 = 24, .vi_end_f2 = 25,
|
|
|
|
.nbr_end = 286,
|
|
|
|
|
|
|
|
.burst_ena = true,
|
|
|
|
.hburst_start = 73, .hburst_len = 32,
|
|
|
|
.vburst_start_f1 = 8, .vburst_end_f1 = 285,
|
|
|
|
.vburst_start_f2 = 8, .vburst_end_f2 = 286,
|
|
|
|
.vburst_start_f3 = 9, .vburst_end_f3 = 286,
|
|
|
|
.vburst_start_f4 = 9, .vburst_end_f4 = 285,
|
|
|
|
|
|
|
|
/* desired 4.4336180 actual 4.4336180 clock 107.52 */
|
|
|
|
.dda1_inc = 168,
|
2009-03-04 12:23:02 +00:00
|
|
|
.dda2_inc = 4122, .dda2_size = 27648,
|
|
|
|
.dda3_inc = 67, .dda3_size = 625,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.sc_reset = TV_SC_RESET_EVERY_8,
|
|
|
|
.pal_burst = true,
|
|
|
|
|
|
|
|
.composite_levels = &pal_levels_composite,
|
|
|
|
.composite_color = &pal_csc_composite,
|
|
|
|
.svideo_levels = &pal_levels_svideo,
|
|
|
|
.svideo_color = &pal_csc_svideo,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
2012-05-22 18:23:24 +00:00
|
|
|
{
|
|
|
|
.name = "480p",
|
|
|
|
.clock = 107520,
|
|
|
|
.refresh = 59940,
|
|
|
|
.oversample = TV_OVERSAMPLE_4X,
|
|
|
|
.component_only = 1,
|
|
|
|
|
|
|
|
.hsync_end = 64, .hblank_end = 122,
|
|
|
|
.hblank_start = 842, .htotal = 857,
|
|
|
|
|
|
|
|
.progressive = true, .trilevel_sync = false,
|
|
|
|
|
|
|
|
.vsync_start_f1 = 12, .vsync_start_f2 = 12,
|
|
|
|
.vsync_len = 12,
|
|
|
|
|
|
|
|
.veq_ena = false,
|
|
|
|
|
|
|
|
.vi_end_f1 = 44, .vi_end_f2 = 44,
|
|
|
|
.nbr_end = 479,
|
|
|
|
|
|
|
|
.burst_ena = false,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "576p",
|
|
|
|
.clock = 107520,
|
|
|
|
.refresh = 50000,
|
|
|
|
.oversample = TV_OVERSAMPLE_4X,
|
|
|
|
.component_only = 1,
|
|
|
|
|
|
|
|
.hsync_end = 64, .hblank_end = 139,
|
|
|
|
.hblank_start = 859, .htotal = 863,
|
|
|
|
|
|
|
|
.progressive = true, .trilevel_sync = false,
|
|
|
|
|
|
|
|
.vsync_start_f1 = 10, .vsync_start_f2 = 10,
|
|
|
|
.vsync_len = 10,
|
|
|
|
|
|
|
|
.veq_ena = false,
|
|
|
|
|
|
|
|
.vi_end_f1 = 48, .vi_end_f2 = 48,
|
|
|
|
.nbr_end = 575,
|
|
|
|
|
|
|
|
.burst_ena = false,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
|
|
|
.name = "720p@60Hz",
|
|
|
|
.clock = 148800,
|
|
|
|
.refresh = 60000,
|
|
|
|
.oversample = TV_OVERSAMPLE_2X,
|
|
|
|
.component_only = 1,
|
|
|
|
|
|
|
|
.hsync_end = 80, .hblank_end = 300,
|
|
|
|
.hblank_start = 1580, .htotal = 1649,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.progressive = true, .trilevel_sync = true,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
.vsync_start_f1 = 10, .vsync_start_f2 = 10,
|
|
|
|
.vsync_len = 10,
|
|
|
|
|
|
|
|
.veq_ena = false,
|
|
|
|
|
|
|
|
.vi_end_f1 = 29, .vi_end_f2 = 29,
|
|
|
|
.nbr_end = 719,
|
|
|
|
|
|
|
|
.burst_ena = false,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "720p@50Hz",
|
|
|
|
.clock = 148800,
|
|
|
|
.refresh = 50000,
|
|
|
|
.oversample = TV_OVERSAMPLE_2X,
|
|
|
|
.component_only = 1,
|
|
|
|
|
|
|
|
.hsync_end = 80, .hblank_end = 300,
|
|
|
|
.hblank_start = 1580, .htotal = 1979,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.progressive = true, .trilevel_sync = true,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
.vsync_start_f1 = 10, .vsync_start_f2 = 10,
|
|
|
|
.vsync_len = 10,
|
|
|
|
|
|
|
|
.veq_ena = false,
|
|
|
|
|
|
|
|
.vi_end_f1 = 29, .vi_end_f2 = 29,
|
|
|
|
.nbr_end = 719,
|
|
|
|
|
|
|
|
.burst_ena = false,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
.max_srcw = 800
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "1080i@50Hz",
|
|
|
|
.clock = 148800,
|
2011-12-14 23:10:06 +00:00
|
|
|
.refresh = 50000,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.oversample = TV_OVERSAMPLE_2X,
|
|
|
|
.component_only = 1,
|
|
|
|
|
|
|
|
.hsync_end = 88, .hblank_end = 235,
|
|
|
|
.hblank_start = 2155, .htotal = 2639,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.progressive = false, .trilevel_sync = true,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
.vsync_start_f1 = 4, .vsync_start_f2 = 5,
|
|
|
|
.vsync_len = 10,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.veq_ena = true, .veq_start_f1 = 4,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.veq_start_f2 = 4, .veq_len = 10,
|
|
|
|
|
|
|
|
|
|
|
|
.vi_end_f1 = 21, .vi_end_f2 = 22,
|
|
|
|
.nbr_end = 539,
|
|
|
|
|
|
|
|
.burst_ena = false,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
|
|
|
{
|
|
|
|
.name = "1080i@60Hz",
|
|
|
|
.clock = 148800,
|
2011-12-14 23:10:06 +00:00
|
|
|
.refresh = 60000,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.oversample = TV_OVERSAMPLE_2X,
|
|
|
|
.component_only = 1,
|
|
|
|
|
|
|
|
.hsync_end = 88, .hblank_end = 235,
|
|
|
|
.hblank_start = 2155, .htotal = 2199,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.progressive = false, .trilevel_sync = true,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
.vsync_start_f1 = 4, .vsync_start_f2 = 5,
|
|
|
|
.vsync_len = 10,
|
|
|
|
|
2011-08-16 19:34:10 +00:00
|
|
|
.veq_ena = true, .veq_start_f1 = 4,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.veq_start_f2 = 4, .veq_len = 10,
|
|
|
|
|
|
|
|
|
|
|
|
.vi_end_f1 = 21, .vi_end_f2 = 22,
|
|
|
|
.nbr_end = 539,
|
|
|
|
|
|
|
|
.burst_ena = false,
|
|
|
|
|
|
|
|
.filter_table = filter_table,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2013-07-21 19:37:02 +00:00
|
|
|
static struct intel_tv *enc_to_tv(struct intel_encoder *encoder)
|
2010-08-04 12:50:23 +00:00
|
|
|
{
|
2013-07-21 19:37:02 +00:00
|
|
|
return container_of(encoder, struct intel_tv, base);
|
2010-08-04 12:50:23 +00:00
|
|
|
}
|
|
|
|
|
2010-09-09 15:20:55 +00:00
|
|
|
static struct intel_tv *intel_attached_tv(struct drm_connector *connector)
|
|
|
|
{
|
2013-07-21 19:37:02 +00:00
|
|
|
return enc_to_tv(intel_attached_encoder(connector));
|
2010-09-09 15:20:55 +00:00
|
|
|
}
|
|
|
|
|
2012-07-02 11:34:59 +00:00
|
|
|
static bool
|
|
|
|
intel_tv_get_hw_state(struct intel_encoder *encoder, enum pipe *pipe)
|
|
|
|
{
|
|
|
|
struct drm_device *dev = encoder->base.dev;
|
2016-07-04 10:34:36 +00:00
|
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
2012-07-02 11:34:59 +00:00
|
|
|
u32 tmp = I915_READ(TV_CTL);
|
|
|
|
|
|
|
|
if (!(tmp & TV_ENC_ENABLE))
|
|
|
|
return false;
|
|
|
|
|
|
|
|
*pipe = PORT_TO_PIPE(tmp);
|
|
|
|
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
static void
|
2016-08-09 15:04:04 +00:00
|
|
|
intel_enable_tv(struct intel_encoder *encoder,
|
2017-08-18 13:49:58 +00:00
|
|
|
const struct intel_crtc_state *pipe_config,
|
|
|
|
const struct drm_connector_state *conn_state)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
2012-06-30 08:33:44 +00:00
|
|
|
struct drm_device *dev = encoder->base.dev;
|
2016-07-04 10:34:36 +00:00
|
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2014-09-08 14:43:01 +00:00
|
|
|
/* Prevents vblank waits from timing out in intel_tv_detect_type() */
|
2016-10-31 20:37:06 +00:00
|
|
|
intel_wait_for_vblank(dev_priv,
|
2014-09-08 14:43:01 +00:00
|
|
|
to_intel_crtc(encoder->base.crtc)->pipe);
|
|
|
|
|
2012-06-30 08:33:44 +00:00
|
|
|
I915_WRITE(TV_CTL, I915_READ(TV_CTL) | TV_ENC_ENABLE);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2016-08-09 15:04:04 +00:00
|
|
|
intel_disable_tv(struct intel_encoder *encoder,
|
2017-08-18 13:49:58 +00:00
|
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
|
|
const struct drm_connector_state *old_conn_state)
|
2012-06-30 08:33:44 +00:00
|
|
|
{
|
|
|
|
struct drm_device *dev = encoder->base.dev;
|
2016-07-04 10:34:36 +00:00
|
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
2012-06-30 08:33:44 +00:00
|
|
|
|
|
|
|
I915_WRITE(TV_CTL, I915_READ(TV_CTL) & ~TV_ENC_ENABLE);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
}
|
|
|
|
|
2017-08-18 13:49:58 +00:00
|
|
|
static const struct tv_mode *intel_tv_mode_find(const struct drm_connector_state *conn_state)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
2017-04-10 09:07:08 +00:00
|
|
|
int format = conn_state->tv.mode;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2017-04-10 09:07:08 +00:00
|
|
|
return &tv_modes[format];
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static enum drm_mode_status
|
2010-09-04 23:52:34 +00:00
|
|
|
intel_tv_mode_valid(struct drm_connector *connector,
|
|
|
|
struct drm_display_mode *mode)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
2017-04-10 09:07:08 +00:00
|
|
|
const struct tv_mode *tv_mode = intel_tv_mode_find(connector->state);
|
2016-02-02 13:16:43 +00:00
|
|
|
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
|
|
|
|
|
|
|
|
if (mode->clock > max_dotclk)
|
|
|
|
return MODE_CLOCK_HIGH;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
/* Ensure TV refresh is close to desired refresh */
|
2009-09-29 08:31:49 +00:00
|
|
|
if (tv_mode && abs(tv_mode->refresh - drm_mode_vrefresh(mode) * 1000)
|
|
|
|
< 1000)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
return MODE_OK;
|
2010-09-04 23:52:34 +00:00
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
return MODE_CLOCK_RANGE;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
2013-11-18 08:00:58 +00:00
|
|
|
static void
|
|
|
|
intel_tv_get_config(struct intel_encoder *encoder,
|
2015-01-15 12:55:21 +00:00
|
|
|
struct intel_crtc_state *pipe_config)
|
2013-11-18 08:00:58 +00:00
|
|
|
{
|
2015-01-15 12:55:22 +00:00
|
|
|
pipe_config->base.adjusted_mode.crtc_clock = pipe_config->port_clock;
|
2013-11-18 08:00:58 +00:00
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
static bool
|
2013-03-26 23:45:01 +00:00
|
|
|
intel_tv_compute_config(struct intel_encoder *encoder,
|
2016-08-09 15:04:05 +00:00
|
|
|
struct intel_crtc_state *pipe_config,
|
|
|
|
struct drm_connector_state *conn_state)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
2017-04-10 09:07:08 +00:00
|
|
|
const struct tv_mode *tv_mode = intel_tv_mode_find(conn_state);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
if (!tv_mode)
|
|
|
|
return false;
|
|
|
|
|
2015-01-15 12:55:22 +00:00
|
|
|
pipe_config->base.adjusted_mode.crtc_clock = tv_mode->clock;
|
2013-03-26 23:45:01 +00:00
|
|
|
DRM_DEBUG_KMS("forcing bpc to 8 for TV\n");
|
|
|
|
pipe_config->pipe_bpp = 8*3;
|
|
|
|
|
2013-09-10 09:44:30 +00:00
|
|
|
/* TV has it's own notion of sync and other mode flags, so clear them. */
|
2015-01-15 12:55:22 +00:00
|
|
|
pipe_config->base.adjusted_mode.flags = 0;
|
2013-09-10 09:44:30 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* FIXME: We don't check whether the input mode is actually what we want
|
|
|
|
* or whether userspace is doing something stupid.
|
|
|
|
*/
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
2014-04-24 21:54:39 +00:00
|
|
|
static void
|
|
|
|
set_tv_mode_timings(struct drm_i915_private *dev_priv,
|
|
|
|
const struct tv_mode *tv_mode,
|
|
|
|
bool burst_ena)
|
|
|
|
{
|
|
|
|
u32 hctl1, hctl2, hctl3;
|
|
|
|
u32 vctl1, vctl2, vctl3, vctl4, vctl5, vctl6, vctl7;
|
|
|
|
|
|
|
|
hctl1 = (tv_mode->hsync_end << TV_HSYNC_END_SHIFT) |
|
|
|
|
(tv_mode->htotal << TV_HTOTAL_SHIFT);
|
|
|
|
|
|
|
|
hctl2 = (tv_mode->hburst_start << 16) |
|
|
|
|
(tv_mode->hburst_len << TV_HBURST_LEN_SHIFT);
|
|
|
|
|
|
|
|
if (burst_ena)
|
|
|
|
hctl2 |= TV_BURST_ENA;
|
|
|
|
|
|
|
|
hctl3 = (tv_mode->hblank_start << TV_HBLANK_START_SHIFT) |
|
|
|
|
(tv_mode->hblank_end << TV_HBLANK_END_SHIFT);
|
|
|
|
|
|
|
|
vctl1 = (tv_mode->nbr_end << TV_NBR_END_SHIFT) |
|
|
|
|
(tv_mode->vi_end_f1 << TV_VI_END_F1_SHIFT) |
|
|
|
|
(tv_mode->vi_end_f2 << TV_VI_END_F2_SHIFT);
|
|
|
|
|
|
|
|
vctl2 = (tv_mode->vsync_len << TV_VSYNC_LEN_SHIFT) |
|
|
|
|
(tv_mode->vsync_start_f1 << TV_VSYNC_START_F1_SHIFT) |
|
|
|
|
(tv_mode->vsync_start_f2 << TV_VSYNC_START_F2_SHIFT);
|
|
|
|
|
|
|
|
vctl3 = (tv_mode->veq_len << TV_VEQ_LEN_SHIFT) |
|
|
|
|
(tv_mode->veq_start_f1 << TV_VEQ_START_F1_SHIFT) |
|
|
|
|
(tv_mode->veq_start_f2 << TV_VEQ_START_F2_SHIFT);
|
|
|
|
|
|
|
|
if (tv_mode->veq_ena)
|
|
|
|
vctl3 |= TV_EQUAL_ENA;
|
|
|
|
|
|
|
|
vctl4 = (tv_mode->vburst_start_f1 << TV_VBURST_START_F1_SHIFT) |
|
|
|
|
(tv_mode->vburst_end_f1 << TV_VBURST_END_F1_SHIFT);
|
|
|
|
|
|
|
|
vctl5 = (tv_mode->vburst_start_f2 << TV_VBURST_START_F2_SHIFT) |
|
|
|
|
(tv_mode->vburst_end_f2 << TV_VBURST_END_F2_SHIFT);
|
|
|
|
|
|
|
|
vctl6 = (tv_mode->vburst_start_f3 << TV_VBURST_START_F3_SHIFT) |
|
|
|
|
(tv_mode->vburst_end_f3 << TV_VBURST_END_F3_SHIFT);
|
|
|
|
|
|
|
|
vctl7 = (tv_mode->vburst_start_f4 << TV_VBURST_START_F4_SHIFT) |
|
|
|
|
(tv_mode->vburst_end_f4 << TV_VBURST_END_F4_SHIFT);
|
|
|
|
|
|
|
|
I915_WRITE(TV_H_CTL_1, hctl1);
|
|
|
|
I915_WRITE(TV_H_CTL_2, hctl2);
|
|
|
|
I915_WRITE(TV_H_CTL_3, hctl3);
|
|
|
|
I915_WRITE(TV_V_CTL_1, vctl1);
|
|
|
|
I915_WRITE(TV_V_CTL_2, vctl2);
|
|
|
|
I915_WRITE(TV_V_CTL_3, vctl3);
|
|
|
|
I915_WRITE(TV_V_CTL_4, vctl4);
|
|
|
|
I915_WRITE(TV_V_CTL_5, vctl5);
|
|
|
|
I915_WRITE(TV_V_CTL_6, vctl6);
|
|
|
|
I915_WRITE(TV_V_CTL_7, vctl7);
|
|
|
|
}
|
|
|
|
|
2014-04-24 21:54:40 +00:00
|
|
|
static void set_color_conversion(struct drm_i915_private *dev_priv,
|
|
|
|
const struct color_conversion *color_conversion)
|
|
|
|
{
|
|
|
|
if (!color_conversion)
|
|
|
|
return;
|
|
|
|
|
|
|
|
I915_WRITE(TV_CSC_Y, (color_conversion->ry << 16) |
|
|
|
|
color_conversion->gy);
|
|
|
|
I915_WRITE(TV_CSC_Y2, (color_conversion->by << 16) |
|
|
|
|
color_conversion->ay);
|
|
|
|
I915_WRITE(TV_CSC_U, (color_conversion->ru << 16) |
|
|
|
|
color_conversion->gu);
|
|
|
|
I915_WRITE(TV_CSC_U2, (color_conversion->bu << 16) |
|
|
|
|
color_conversion->au);
|
|
|
|
I915_WRITE(TV_CSC_V, (color_conversion->rv << 16) |
|
|
|
|
color_conversion->gv);
|
|
|
|
I915_WRITE(TV_CSC_V2, (color_conversion->bv << 16) |
|
|
|
|
color_conversion->av);
|
|
|
|
}
|
|
|
|
|
2016-08-09 15:04:04 +00:00
|
|
|
static void intel_tv_pre_enable(struct intel_encoder *encoder,
|
2017-08-18 13:49:58 +00:00
|
|
|
const struct intel_crtc_state *pipe_config,
|
|
|
|
const struct drm_connector_state *conn_state)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
2016-11-16 08:55:40 +00:00
|
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
2013-07-21 19:37:02 +00:00
|
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc);
|
|
|
|
struct intel_tv *intel_tv = enc_to_tv(encoder);
|
2017-04-10 09:07:08 +00:00
|
|
|
const struct tv_mode *tv_mode = intel_tv_mode_find(conn_state);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
u32 tv_ctl;
|
|
|
|
u32 scctl1, scctl2, scctl3;
|
|
|
|
int i, j;
|
|
|
|
const struct video_levels *video_levels;
|
|
|
|
const struct color_conversion *color_conversion;
|
|
|
|
bool burst_ena;
|
2014-04-24 21:54:42 +00:00
|
|
|
int xpos = 0x0, ypos = 0x0;
|
|
|
|
unsigned int xsize, ysize;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
if (!tv_mode)
|
|
|
|
return; /* can't happen (mode_prepare prevents this) */
|
|
|
|
|
2009-03-04 11:36:02 +00:00
|
|
|
tv_ctl = I915_READ(TV_CTL);
|
|
|
|
tv_ctl &= TV_CTL_SAVE;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2010-08-04 12:50:23 +00:00
|
|
|
switch (intel_tv->type) {
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
default:
|
|
|
|
case DRM_MODE_CONNECTOR_Unknown:
|
|
|
|
case DRM_MODE_CONNECTOR_Composite:
|
|
|
|
tv_ctl |= TV_ENC_OUTPUT_COMPOSITE;
|
|
|
|
video_levels = tv_mode->composite_levels;
|
|
|
|
color_conversion = tv_mode->composite_color;
|
|
|
|
burst_ena = tv_mode->burst_ena;
|
|
|
|
break;
|
|
|
|
case DRM_MODE_CONNECTOR_Component:
|
|
|
|
tv_ctl |= TV_ENC_OUTPUT_COMPONENT;
|
|
|
|
video_levels = &component_levels;
|
|
|
|
if (tv_mode->burst_ena)
|
|
|
|
color_conversion = &sdtv_csc_yprpb;
|
|
|
|
else
|
|
|
|
color_conversion = &hdtv_csc_yprpb;
|
|
|
|
burst_ena = false;
|
|
|
|
break;
|
|
|
|
case DRM_MODE_CONNECTOR_SVIDEO:
|
|
|
|
tv_ctl |= TV_ENC_OUTPUT_SVIDEO;
|
|
|
|
video_levels = tv_mode->svideo_levels;
|
|
|
|
color_conversion = tv_mode->svideo_color;
|
|
|
|
burst_ena = tv_mode->burst_ena;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (intel_crtc->pipe == 1)
|
|
|
|
tv_ctl |= TV_ENC_PIPEB_SELECT;
|
|
|
|
tv_ctl |= tv_mode->oversample;
|
|
|
|
|
|
|
|
if (tv_mode->progressive)
|
|
|
|
tv_ctl |= TV_PROGRESSIVE;
|
|
|
|
if (tv_mode->trilevel_sync)
|
|
|
|
tv_ctl |= TV_TRILEVEL_SYNC;
|
|
|
|
if (tv_mode->pal_burst)
|
|
|
|
tv_ctl |= TV_PAL_BURST;
|
2009-11-27 13:06:56 +00:00
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
scctl1 = 0;
|
2009-11-27 13:06:56 +00:00
|
|
|
if (tv_mode->dda1_inc)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
scctl1 |= TV_SC_DDA1_EN;
|
|
|
|
if (tv_mode->dda2_inc)
|
|
|
|
scctl1 |= TV_SC_DDA2_EN;
|
|
|
|
if (tv_mode->dda3_inc)
|
|
|
|
scctl1 |= TV_SC_DDA3_EN;
|
|
|
|
scctl1 |= tv_mode->sc_reset;
|
2009-11-27 13:06:56 +00:00
|
|
|
if (video_levels)
|
|
|
|
scctl1 |= video_levels->burst << TV_BURST_LEVEL_SHIFT;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
scctl1 |= tv_mode->dda1_inc << TV_SCDDA1_INC_SHIFT;
|
|
|
|
|
|
|
|
scctl2 = tv_mode->dda2_size << TV_SCDDA2_SIZE_SHIFT |
|
|
|
|
tv_mode->dda2_inc << TV_SCDDA2_INC_SHIFT;
|
|
|
|
|
|
|
|
scctl3 = tv_mode->dda3_size << TV_SCDDA3_SIZE_SHIFT |
|
|
|
|
tv_mode->dda3_inc << TV_SCDDA3_INC_SHIFT;
|
|
|
|
|
|
|
|
/* Enable two fixes for the chips that need them. */
|
2016-10-13 10:02:58 +00:00
|
|
|
if (IS_I915GM(dev_priv))
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
tv_ctl |= TV_ENC_C0_FIX | TV_ENC_SDP_FIX;
|
|
|
|
|
2014-04-24 21:54:39 +00:00
|
|
|
set_tv_mode_timings(dev_priv, tv_mode, burst_ena);
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
I915_WRITE(TV_SC_CTL_1, scctl1);
|
|
|
|
I915_WRITE(TV_SC_CTL_2, scctl2);
|
|
|
|
I915_WRITE(TV_SC_CTL_3, scctl3);
|
|
|
|
|
2014-04-24 21:54:40 +00:00
|
|
|
set_color_conversion(dev_priv, color_conversion);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2016-11-16 08:55:40 +00:00
|
|
|
if (INTEL_GEN(dev_priv) >= 4)
|
2009-03-04 11:36:02 +00:00
|
|
|
I915_WRITE(TV_CLR_KNOBS, 0x00404000);
|
|
|
|
else
|
|
|
|
I915_WRITE(TV_CLR_KNOBS, 0x00606000);
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
if (video_levels)
|
|
|
|
I915_WRITE(TV_CLR_LEVEL,
|
|
|
|
((video_levels->black << TV_BLACK_LEVEL_SHIFT) |
|
|
|
|
(video_levels->blank << TV_BLANK_LEVEL_SHIFT)));
|
2014-04-24 21:54:42 +00:00
|
|
|
|
|
|
|
assert_pipe_disabled(dev_priv, intel_crtc->pipe);
|
|
|
|
|
|
|
|
/* Filter ctl must be set before TV_WIN_SIZE */
|
|
|
|
I915_WRITE(TV_FILTER_CTL_1, TV_AUTO_SCALE);
|
|
|
|
xsize = tv_mode->hblank_start - tv_mode->hblank_end;
|
|
|
|
if (tv_mode->progressive)
|
|
|
|
ysize = tv_mode->nbr_end + 1;
|
|
|
|
else
|
|
|
|
ysize = 2*tv_mode->nbr_end + 1;
|
|
|
|
|
2017-04-10 09:07:08 +00:00
|
|
|
xpos += conn_state->tv.margins.left;
|
|
|
|
ypos += conn_state->tv.margins.top;
|
|
|
|
xsize -= (conn_state->tv.margins.left +
|
|
|
|
conn_state->tv.margins.right);
|
|
|
|
ysize -= (conn_state->tv.margins.top +
|
|
|
|
conn_state->tv.margins.bottom);
|
2014-04-24 21:54:42 +00:00
|
|
|
I915_WRITE(TV_WIN_POS, (xpos<<16)|ypos);
|
|
|
|
I915_WRITE(TV_WIN_SIZE, (xsize<<16)|ysize);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
j = 0;
|
|
|
|
for (i = 0; i < 60; i++)
|
2015-09-18 17:03:21 +00:00
|
|
|
I915_WRITE(TV_H_LUMA(i), tv_mode->filter_table[j++]);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
for (i = 0; i < 60; i++)
|
2015-09-18 17:03:21 +00:00
|
|
|
I915_WRITE(TV_H_CHROMA(i), tv_mode->filter_table[j++]);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
for (i = 0; i < 43; i++)
|
2015-09-18 17:03:21 +00:00
|
|
|
I915_WRITE(TV_V_LUMA(i), tv_mode->filter_table[j++]);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
for (i = 0; i < 43; i++)
|
2015-09-18 17:03:21 +00:00
|
|
|
I915_WRITE(TV_V_CHROMA(i), tv_mode->filter_table[j++]);
|
2010-09-04 23:43:42 +00:00
|
|
|
I915_WRITE(TV_DAC, I915_READ(TV_DAC) & TV_DAC_SAVE);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
I915_WRITE(TV_CTL, tv_ctl);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct drm_display_mode reported_modes[] = {
|
|
|
|
{
|
|
|
|
.name = "NTSC 480i",
|
|
|
|
.clock = 107520,
|
|
|
|
.hdisplay = 1280,
|
|
|
|
.hsync_start = 1368,
|
|
|
|
.hsync_end = 1496,
|
|
|
|
.htotal = 1712,
|
|
|
|
|
|
|
|
.vdisplay = 1024,
|
|
|
|
.vsync_start = 1027,
|
|
|
|
.vsync_end = 1034,
|
|
|
|
.vtotal = 1104,
|
|
|
|
.type = DRM_MODE_TYPE_DRIVER,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Detects TV presence by checking for load.
|
|
|
|
*
|
|
|
|
* Requires that the current pipe's DPLL is active.
|
|
|
|
|
|
|
|
* \return true if TV is connected.
|
|
|
|
* \return false if TV is disconnected.
|
|
|
|
*/
|
|
|
|
static int
|
2011-08-16 19:34:10 +00:00
|
|
|
intel_tv_detect_type(struct intel_tv *intel_tv,
|
2011-02-10 10:05:35 +00:00
|
|
|
struct drm_connector *connector)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
2016-02-17 08:18:37 +00:00
|
|
|
struct drm_crtc *crtc = connector->state->crtc;
|
2011-05-13 00:10:57 +00:00
|
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
|
2016-02-17 08:18:37 +00:00
|
|
|
struct drm_device *dev = connector->dev;
|
2016-07-04 10:34:36 +00:00
|
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
u32 tv_ctl, save_tv_ctl;
|
|
|
|
u32 tv_dac, save_tv_dac;
|
2010-09-04 23:44:20 +00:00
|
|
|
int type;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
/* Disable TV interrupts around load detect or we'll recurse */
|
2011-02-10 10:05:35 +00:00
|
|
|
if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
|
2014-09-15 12:55:25 +00:00
|
|
|
spin_lock_irq(&dev_priv->irq_lock);
|
2011-02-10 10:05:35 +00:00
|
|
|
i915_disable_pipestat(dev_priv, 0,
|
2014-02-10 16:42:47 +00:00
|
|
|
PIPE_HOTPLUG_INTERRUPT_STATUS |
|
|
|
|
PIPE_HOTPLUG_TV_INTERRUPT_STATUS);
|
2014-09-15 12:55:25 +00:00
|
|
|
spin_unlock_irq(&dev_priv->irq_lock);
|
2011-02-10 10:05:35 +00:00
|
|
|
}
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2010-09-04 23:44:20 +00:00
|
|
|
save_tv_dac = tv_dac = I915_READ(TV_DAC);
|
|
|
|
save_tv_ctl = tv_ctl = I915_READ(TV_CTL);
|
|
|
|
|
|
|
|
/* Poll for TV detection */
|
|
|
|
tv_ctl &= ~(TV_ENC_ENABLE | TV_TEST_MODE_MASK);
|
2009-06-22 14:08:35 +00:00
|
|
|
tv_ctl |= TV_TEST_MODE_MONITOR_DETECT;
|
2011-05-13 00:10:57 +00:00
|
|
|
if (intel_crtc->pipe == 1)
|
|
|
|
tv_ctl |= TV_ENC_PIPEB_SELECT;
|
|
|
|
else
|
|
|
|
tv_ctl &= ~TV_ENC_PIPEB_SELECT;
|
2010-09-04 23:44:20 +00:00
|
|
|
|
|
|
|
tv_dac &= ~(TVDAC_SENSE_MASK | DAC_A_MASK | DAC_B_MASK | DAC_C_MASK);
|
2009-06-22 14:08:35 +00:00
|
|
|
tv_dac |= (TVDAC_STATE_CHG_EN |
|
|
|
|
TVDAC_A_SENSE_CTL |
|
|
|
|
TVDAC_B_SENSE_CTL |
|
|
|
|
TVDAC_C_SENSE_CTL |
|
|
|
|
DAC_CTL_OVERRIDE |
|
|
|
|
DAC_A_0_7_V |
|
|
|
|
DAC_B_0_7_V |
|
|
|
|
DAC_C_0_7_V);
|
2010-09-04 23:44:20 +00:00
|
|
|
|
2012-03-25 20:56:14 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* The TV sense state should be cleared to zero on cantiga platform. Otherwise
|
|
|
|
* the TV is misdetected. This is hardware requirement.
|
|
|
|
*/
|
2016-10-13 10:02:58 +00:00
|
|
|
if (IS_GM45(dev_priv))
|
2012-03-25 20:56:14 +00:00
|
|
|
tv_dac &= ~(TVDAC_STATE_CHG_EN | TVDAC_A_SENSE_CTL |
|
|
|
|
TVDAC_B_SENSE_CTL | TVDAC_C_SENSE_CTL);
|
|
|
|
|
2009-06-22 14:08:35 +00:00
|
|
|
I915_WRITE(TV_CTL, tv_ctl);
|
|
|
|
I915_WRITE(TV_DAC, tv_dac);
|
2010-09-04 16:24:04 +00:00
|
|
|
POSTING_READ(TV_DAC);
|
|
|
|
|
2016-10-31 20:37:06 +00:00
|
|
|
intel_wait_for_vblank(dev_priv, intel_crtc->pipe);
|
2010-09-22 18:10:09 +00:00
|
|
|
|
2010-09-04 23:44:20 +00:00
|
|
|
type = -1;
|
2011-05-13 00:10:58 +00:00
|
|
|
tv_dac = I915_READ(TV_DAC);
|
|
|
|
DRM_DEBUG_KMS("TV detected: %x, %x\n", tv_ctl, tv_dac);
|
|
|
|
/*
|
|
|
|
* A B C
|
|
|
|
* 0 1 1 Composite
|
|
|
|
* 1 0 X svideo
|
|
|
|
* 0 0 0 Component
|
|
|
|
*/
|
|
|
|
if ((tv_dac & TVDAC_SENSE_MASK) == (TVDAC_B_SENSE | TVDAC_C_SENSE)) {
|
|
|
|
DRM_DEBUG_KMS("Detected Composite TV connection\n");
|
|
|
|
type = DRM_MODE_CONNECTOR_Composite;
|
|
|
|
} else if ((tv_dac & (TVDAC_A_SENSE|TVDAC_B_SENSE)) == TVDAC_A_SENSE) {
|
|
|
|
DRM_DEBUG_KMS("Detected S-Video TV connection\n");
|
|
|
|
type = DRM_MODE_CONNECTOR_SVIDEO;
|
|
|
|
} else if ((tv_dac & TVDAC_SENSE_MASK) == 0) {
|
|
|
|
DRM_DEBUG_KMS("Detected Component TV connection\n");
|
|
|
|
type = DRM_MODE_CONNECTOR_Component;
|
|
|
|
} else {
|
|
|
|
DRM_DEBUG_KMS("Unrecognised TV connection\n");
|
|
|
|
type = -1;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
}
|
|
|
|
|
2010-09-04 23:44:20 +00:00
|
|
|
I915_WRITE(TV_DAC, save_tv_dac & ~TVDAC_STATE_CHG_EN);
|
|
|
|
I915_WRITE(TV_CTL, save_tv_ctl);
|
2012-05-22 19:41:25 +00:00
|
|
|
POSTING_READ(TV_CTL);
|
|
|
|
|
|
|
|
/* For unknown reasons the hw barfs if we don't do this vblank wait. */
|
2016-10-31 20:37:06 +00:00
|
|
|
intel_wait_for_vblank(dev_priv, intel_crtc->pipe);
|
2010-09-04 23:44:20 +00:00
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
/* Restore interrupt config */
|
2011-02-10 10:05:35 +00:00
|
|
|
if (connector->polled & DRM_CONNECTOR_POLL_HPD) {
|
2014-09-15 12:55:25 +00:00
|
|
|
spin_lock_irq(&dev_priv->irq_lock);
|
2011-02-10 10:05:35 +00:00
|
|
|
i915_enable_pipestat(dev_priv, 0,
|
2014-02-10 16:42:47 +00:00
|
|
|
PIPE_HOTPLUG_INTERRUPT_STATUS |
|
|
|
|
PIPE_HOTPLUG_TV_INTERRUPT_STATUS);
|
2014-09-15 12:55:25 +00:00
|
|
|
spin_unlock_irq(&dev_priv->irq_lock);
|
2011-02-10 10:05:35 +00:00
|
|
|
}
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
return type;
|
|
|
|
}
|
|
|
|
|
2009-08-24 05:50:25 +00:00
|
|
|
/*
|
|
|
|
* Here we set accurate tv format according to connector type
|
|
|
|
* i.e Component TV should not be assigned by NTSC or PAL
|
|
|
|
*/
|
|
|
|
static void intel_tv_find_better_format(struct drm_connector *connector)
|
|
|
|
{
|
2010-09-09 15:20:55 +00:00
|
|
|
struct intel_tv *intel_tv = intel_attached_tv(connector);
|
2017-04-10 09:07:08 +00:00
|
|
|
const struct tv_mode *tv_mode = intel_tv_mode_find(connector->state);
|
2009-08-24 05:50:25 +00:00
|
|
|
int i;
|
|
|
|
|
2010-08-04 12:50:23 +00:00
|
|
|
if ((intel_tv->type == DRM_MODE_CONNECTOR_Component) ==
|
2009-08-24 05:50:25 +00:00
|
|
|
tv_mode->component_only)
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
2015-08-21 17:45:28 +00:00
|
|
|
for (i = 0; i < ARRAY_SIZE(tv_modes); i++) {
|
2009-08-24 05:50:25 +00:00
|
|
|
tv_mode = tv_modes + i;
|
|
|
|
|
2010-08-04 12:50:23 +00:00
|
|
|
if ((intel_tv->type == DRM_MODE_CONNECTOR_Component) ==
|
2009-08-24 05:50:25 +00:00
|
|
|
tv_mode->component_only)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2017-04-10 09:07:08 +00:00
|
|
|
connector->state->tv.mode = i;
|
2009-08-24 05:50:25 +00:00
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
/**
|
|
|
|
* Detect the TV connection.
|
|
|
|
*
|
|
|
|
* Currently this always returns CONNECTOR_STATUS_UNKNOWN, as we need to be sure
|
|
|
|
* we have a pipe programmed in order to probe the TV.
|
|
|
|
*/
|
2017-04-06 18:55:20 +00:00
|
|
|
static int
|
|
|
|
intel_tv_detect(struct drm_connector *connector,
|
|
|
|
struct drm_modeset_acquire_ctx *ctx,
|
|
|
|
bool force)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
|
|
|
struct drm_display_mode mode;
|
2010-09-09 15:20:55 +00:00
|
|
|
struct intel_tv *intel_tv = intel_attached_tv(connector);
|
2014-09-02 09:57:22 +00:00
|
|
|
enum drm_connector_status status;
|
2010-08-04 12:50:23 +00:00
|
|
|
int type;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2013-07-20 19:27:08 +00:00
|
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] force=%d\n",
|
2014-06-03 11:56:17 +00:00
|
|
|
connector->base.id, connector->name,
|
2013-07-20 19:27:08 +00:00
|
|
|
force);
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
mode = reported_modes[0];
|
|
|
|
|
2012-04-20 19:25:04 +00:00
|
|
|
if (force) {
|
2011-04-19 22:18:09 +00:00
|
|
|
struct intel_load_detect_pipe tmp;
|
2017-04-06 18:55:20 +00:00
|
|
|
int ret;
|
2010-08-04 12:50:23 +00:00
|
|
|
|
2017-04-06 18:55:20 +00:00
|
|
|
ret = intel_get_load_detect_pipe(connector, &mode, &tmp, ctx);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2014-08-11 10:15:35 +00:00
|
|
|
|
2017-04-06 18:55:20 +00:00
|
|
|
if (ret > 0) {
|
2011-02-10 10:05:35 +00:00
|
|
|
type = intel_tv_detect_type(intel_tv, connector);
|
2017-04-06 18:55:20 +00:00
|
|
|
intel_release_load_detect_pipe(connector, &tmp, ctx);
|
2014-09-02 09:57:22 +00:00
|
|
|
status = type < 0 ?
|
|
|
|
connector_status_disconnected :
|
|
|
|
connector_status_connected;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
} else
|
2014-09-02 09:57:22 +00:00
|
|
|
status = connector_status_unknown;
|
2009-03-04 11:36:03 +00:00
|
|
|
|
2017-04-10 09:07:08 +00:00
|
|
|
if (status == connector_status_connected) {
|
|
|
|
intel_tv->type = type;
|
|
|
|
intel_tv_find_better_format(connector);
|
|
|
|
}
|
2011-04-12 05:51:37 +00:00
|
|
|
|
2017-04-10 09:07:08 +00:00
|
|
|
return status;
|
|
|
|
} else
|
|
|
|
return connector->status;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
}
|
|
|
|
|
2010-09-04 23:52:34 +00:00
|
|
|
static const struct input_res {
|
|
|
|
const char *name;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
int w, h;
|
2010-09-04 23:52:34 +00:00
|
|
|
} input_res_table[] = {
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{"640x480", 640, 480},
|
|
|
|
{"800x600", 800, 600},
|
|
|
|
{"1024x768", 1024, 768},
|
|
|
|
{"1280x1024", 1280, 1024},
|
|
|
|
{"848x480", 848, 480},
|
|
|
|
{"1280x720", 1280, 720},
|
|
|
|
{"1920x1080", 1920, 1080},
|
|
|
|
};
|
|
|
|
|
2009-07-20 05:20:23 +00:00
|
|
|
/*
|
|
|
|
* Chose preferred mode according to line number of TV format
|
|
|
|
*/
|
|
|
|
static void
|
2017-04-10 09:07:08 +00:00
|
|
|
intel_tv_choose_preferred_modes(const struct tv_mode *tv_mode,
|
2009-07-20 05:20:23 +00:00
|
|
|
struct drm_display_mode *mode_ptr)
|
|
|
|
{
|
|
|
|
if (tv_mode->nbr_end < 480 && mode_ptr->vdisplay == 480)
|
|
|
|
mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
|
|
|
|
else if (tv_mode->nbr_end > 480) {
|
|
|
|
if (tv_mode->progressive == true && tv_mode->nbr_end < 720) {
|
|
|
|
if (mode_ptr->vdisplay == 720)
|
|
|
|
mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
|
|
|
|
} else if (mode_ptr->vdisplay == 1080)
|
|
|
|
mode_ptr->type |= DRM_MODE_TYPE_PREFERRED;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
/**
|
|
|
|
* Stub get_modes function.
|
|
|
|
*
|
|
|
|
* This should probably return a set of fixed modes, unless we can figure out
|
|
|
|
* how to probe modes off of TV connections.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int
|
|
|
|
intel_tv_get_modes(struct drm_connector *connector)
|
|
|
|
{
|
|
|
|
struct drm_display_mode *mode_ptr;
|
2017-04-10 09:07:08 +00:00
|
|
|
const struct tv_mode *tv_mode = intel_tv_mode_find(connector->state);
|
2009-03-04 11:36:01 +00:00
|
|
|
int j, count = 0;
|
|
|
|
u64 tmp;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2010-06-28 11:54:56 +00:00
|
|
|
for (j = 0; j < ARRAY_SIZE(input_res_table);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
j++) {
|
2010-09-04 23:52:34 +00:00
|
|
|
const struct input_res *input = &input_res_table[j];
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
unsigned int hactive_s = input->w;
|
|
|
|
unsigned int vactive_s = input->h;
|
|
|
|
|
|
|
|
if (tv_mode->max_srcw && input->w > tv_mode->max_srcw)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (input->w > 1024 && (!tv_mode->progressive
|
|
|
|
&& !tv_mode->component_only))
|
|
|
|
continue;
|
|
|
|
|
2009-03-04 11:36:01 +00:00
|
|
|
mode_ptr = drm_mode_create(connector->dev);
|
|
|
|
if (!mode_ptr)
|
|
|
|
continue;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
strncpy(mode_ptr->name, input->name, DRM_DISPLAY_MODE_LEN);
|
2016-01-29 12:52:29 +00:00
|
|
|
mode_ptr->name[DRM_DISPLAY_MODE_LEN - 1] = '\0';
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
mode_ptr->hdisplay = hactive_s;
|
|
|
|
mode_ptr->hsync_start = hactive_s + 1;
|
|
|
|
mode_ptr->hsync_end = hactive_s + 64;
|
|
|
|
if (mode_ptr->hsync_end <= mode_ptr->hsync_start)
|
|
|
|
mode_ptr->hsync_end = mode_ptr->hsync_start + 1;
|
|
|
|
mode_ptr->htotal = hactive_s + 96;
|
|
|
|
|
|
|
|
mode_ptr->vdisplay = vactive_s;
|
|
|
|
mode_ptr->vsync_start = vactive_s + 1;
|
|
|
|
mode_ptr->vsync_end = vactive_s + 32;
|
|
|
|
if (mode_ptr->vsync_end <= mode_ptr->vsync_start)
|
|
|
|
mode_ptr->vsync_end = mode_ptr->vsync_start + 1;
|
|
|
|
mode_ptr->vtotal = vactive_s + 33;
|
|
|
|
|
2017-09-13 10:51:53 +00:00
|
|
|
tmp = mul_u32_u32(tv_mode->refresh, mode_ptr->vtotal);
|
2009-03-04 11:36:01 +00:00
|
|
|
tmp *= mode_ptr->htotal;
|
|
|
|
tmp = div_u64(tmp, 1000000);
|
|
|
|
mode_ptr->clock = (int) tmp;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
mode_ptr->type = DRM_MODE_TYPE_DRIVER;
|
2017-04-10 09:07:08 +00:00
|
|
|
intel_tv_choose_preferred_modes(tv_mode, mode_ptr);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
drm_mode_probed_add(connector, mode_ptr);
|
2009-03-04 11:36:01 +00:00
|
|
|
count++;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
}
|
|
|
|
|
2009-03-04 11:36:01 +00:00
|
|
|
return count;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2011-08-16 19:34:10 +00:00
|
|
|
intel_tv_destroy(struct drm_connector *connector)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
|
|
|
drm_connector_cleanup(connector);
|
2010-03-29 08:38:44 +00:00
|
|
|
kfree(connector);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct drm_connector_funcs intel_tv_connector_funcs = {
|
2016-06-24 13:00:15 +00:00
|
|
|
.late_register = intel_connector_register,
|
2016-06-17 10:40:33 +00:00
|
|
|
.early_unregister = intel_connector_unregister,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.destroy = intel_tv_destroy,
|
|
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
2015-01-23 00:50:32 +00:00
|
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
2015-03-20 14:18:06 +00:00
|
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
2017-04-10 09:07:08 +00:00
|
|
|
static int intel_tv_atomic_check(struct drm_connector *connector,
|
|
|
|
struct drm_connector_state *new_state)
|
|
|
|
{
|
|
|
|
struct drm_crtc_state *new_crtc_state;
|
|
|
|
struct drm_connector_state *old_state;
|
|
|
|
|
|
|
|
if (!new_state->crtc)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
old_state = drm_atomic_get_old_connector_state(new_state->state, connector);
|
|
|
|
new_crtc_state = drm_atomic_get_new_crtc_state(new_state->state, new_state->crtc);
|
|
|
|
|
|
|
|
if (old_state->tv.mode != new_state->tv.mode ||
|
|
|
|
old_state->tv.margins.left != new_state->tv.margins.left ||
|
|
|
|
old_state->tv.margins.right != new_state->tv.margins.right ||
|
|
|
|
old_state->tv.margins.top != new_state->tv.margins.top ||
|
|
|
|
old_state->tv.margins.bottom != new_state->tv.margins.bottom) {
|
|
|
|
/* Force a modeset. */
|
|
|
|
|
|
|
|
new_crtc_state->connectors_changed = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
static const struct drm_connector_helper_funcs intel_tv_connector_helper_funcs = {
|
2017-04-06 18:55:20 +00:00
|
|
|
.detect_ctx = intel_tv_detect,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
.mode_valid = intel_tv_mode_valid,
|
|
|
|
.get_modes = intel_tv_get_modes,
|
2017-04-10 09:07:08 +00:00
|
|
|
.atomic_check = intel_tv_atomic_check,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct drm_encoder_funcs intel_tv_enc_funcs = {
|
2010-08-04 12:50:23 +00:00
|
|
|
.destroy = intel_encoder_destroy,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
void
|
2016-11-23 14:21:44 +00:00
|
|
|
intel_tv_init(struct drm_i915_private *dev_priv)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
{
|
2016-11-23 14:21:44 +00:00
|
|
|
struct drm_device *dev = &dev_priv->drm;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
struct drm_connector *connector;
|
2010-08-04 12:50:23 +00:00
|
|
|
struct intel_tv *intel_tv;
|
2010-03-25 18:11:14 +00:00
|
|
|
struct intel_encoder *intel_encoder;
|
2010-03-29 08:38:44 +00:00
|
|
|
struct intel_connector *intel_connector;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
u32 tv_dac_on, tv_dac_off, save_tv_dac;
|
2015-08-31 12:09:26 +00:00
|
|
|
const char *tv_format_names[ARRAY_SIZE(tv_modes)];
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
int i, initial_mode = 0;
|
2017-04-10 09:07:08 +00:00
|
|
|
struct drm_connector_state *state;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
if ((I915_READ(TV_CTL) & TV_FUSE_STATE_MASK) == TV_FUSE_STATE_DISABLED)
|
|
|
|
return;
|
|
|
|
|
2016-03-16 10:43:29 +00:00
|
|
|
if (!intel_bios_is_tv_present(dev_priv)) {
|
2009-11-24 01:48:48 +00:00
|
|
|
DRM_DEBUG_KMS("Integrated TV is not present.\n");
|
|
|
|
return;
|
|
|
|
}
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Sanity check the TV output by checking to see if the
|
|
|
|
* DAC register holds a value
|
|
|
|
*/
|
|
|
|
save_tv_dac = I915_READ(TV_DAC);
|
|
|
|
|
|
|
|
I915_WRITE(TV_DAC, save_tv_dac | TVDAC_STATE_CHG_EN);
|
|
|
|
tv_dac_on = I915_READ(TV_DAC);
|
|
|
|
|
|
|
|
I915_WRITE(TV_DAC, save_tv_dac & ~TVDAC_STATE_CHG_EN);
|
|
|
|
tv_dac_off = I915_READ(TV_DAC);
|
|
|
|
|
|
|
|
I915_WRITE(TV_DAC, save_tv_dac);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the register does not hold the state change enable
|
|
|
|
* bit, (either as a 0 or a 1), assume it doesn't really
|
|
|
|
* exist
|
|
|
|
*/
|
|
|
|
if ((tv_dac_on & TVDAC_STATE_CHG_EN) == 0 ||
|
|
|
|
(tv_dac_off & TVDAC_STATE_CHG_EN) != 0)
|
|
|
|
return;
|
|
|
|
|
2013-09-19 10:18:32 +00:00
|
|
|
intel_tv = kzalloc(sizeof(*intel_tv), GFP_KERNEL);
|
2010-08-04 12:50:23 +00:00
|
|
|
if (!intel_tv) {
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
return;
|
|
|
|
}
|
2009-08-24 05:50:24 +00:00
|
|
|
|
2015-04-10 07:59:10 +00:00
|
|
|
intel_connector = intel_connector_alloc();
|
2010-03-29 08:38:44 +00:00
|
|
|
if (!intel_connector) {
|
2010-08-04 12:50:23 +00:00
|
|
|
kfree(intel_tv);
|
2010-03-29 08:38:44 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2010-08-04 12:50:23 +00:00
|
|
|
intel_encoder = &intel_tv->base;
|
2010-03-29 08:38:44 +00:00
|
|
|
connector = &intel_connector->base;
|
2017-04-10 09:07:08 +00:00
|
|
|
state = connector->state;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2011-02-10 10:05:35 +00:00
|
|
|
/* The documentation, for the older chipsets at least, recommend
|
|
|
|
* using a polling method rather than hotplug detection for TVs.
|
|
|
|
* This is because in order to perform the hotplug detection, the PLLs
|
|
|
|
* for the TV must be kept alive increasing power drain and starving
|
|
|
|
* bandwidth from other encoders. Notably for instance, it causes
|
|
|
|
* pipe underruns on Crestline when this encoder is supposedly idle.
|
|
|
|
*
|
|
|
|
* More recent chipsets favour HDMI rather than integrated S-Video.
|
|
|
|
*/
|
2013-04-16 11:36:55 +00:00
|
|
|
intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
|
2011-02-10 10:05:35 +00:00
|
|
|
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
drm_connector_init(dev, connector, &intel_tv_connector_funcs,
|
|
|
|
DRM_MODE_CONNECTOR_SVIDEO);
|
|
|
|
|
2010-09-09 14:14:28 +00:00
|
|
|
drm_encoder_init(dev, &intel_encoder->base, &intel_tv_enc_funcs,
|
2016-05-27 17:59:24 +00:00
|
|
|
DRM_MODE_ENCODER_TVDAC, "TV");
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2013-03-26 23:45:01 +00:00
|
|
|
intel_encoder->compute_config = intel_tv_compute_config;
|
2013-11-18 08:00:58 +00:00
|
|
|
intel_encoder->get_config = intel_tv_get_config;
|
2014-04-24 21:54:43 +00:00
|
|
|
intel_encoder->pre_enable = intel_tv_pre_enable;
|
2012-06-30 08:33:44 +00:00
|
|
|
intel_encoder->enable = intel_enable_tv;
|
|
|
|
intel_encoder->disable = intel_disable_tv;
|
2012-07-02 11:34:59 +00:00
|
|
|
intel_encoder->get_hw_state = intel_tv_get_hw_state;
|
|
|
|
intel_connector->get_hw_state = intel_connector_get_hw_state;
|
2012-06-30 08:33:44 +00:00
|
|
|
|
2010-09-09 15:20:55 +00:00
|
|
|
intel_connector_attach_encoder(intel_connector, intel_encoder);
|
2016-09-20 01:24:38 +00:00
|
|
|
|
2010-03-25 18:11:14 +00:00
|
|
|
intel_encoder->type = INTEL_OUTPUT_TVOUT;
|
2017-02-22 06:34:27 +00:00
|
|
|
intel_encoder->power_domain = POWER_DOMAIN_PORT_OTHER;
|
2016-09-20 01:24:38 +00:00
|
|
|
intel_encoder->port = PORT_NONE;
|
2010-03-25 18:11:14 +00:00
|
|
|
intel_encoder->crtc_mask = (1 << 0) | (1 << 1);
|
2014-03-03 14:15:28 +00:00
|
|
|
intel_encoder->cloneable = 0;
|
2010-09-09 14:14:28 +00:00
|
|
|
intel_encoder->base.possible_crtcs = ((1 << 0) | (1 << 1));
|
2010-08-04 12:50:23 +00:00
|
|
|
intel_tv->type = DRM_MODE_CONNECTOR_Unknown;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
/* BIOS margin values */
|
2017-04-10 09:07:08 +00:00
|
|
|
state->tv.margins.left = 54;
|
|
|
|
state->tv.margins.top = 36;
|
|
|
|
state->tv.margins.right = 46;
|
|
|
|
state->tv.margins.bottom = 37;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2017-04-10 09:07:08 +00:00
|
|
|
state->tv.mode = initial_mode;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
|
|
|
drm_connector_helper_add(connector, &intel_tv_connector_helper_funcs);
|
|
|
|
connector->interlace_allowed = false;
|
|
|
|
connector->doublescan_allowed = false;
|
|
|
|
|
|
|
|
/* Create TV properties then attach current values */
|
2010-06-23 17:29:54 +00:00
|
|
|
for (i = 0; i < ARRAY_SIZE(tv_modes); i++)
|
2015-08-31 12:09:26 +00:00
|
|
|
tv_format_names[i] = tv_modes[i].name;
|
2010-09-04 23:52:34 +00:00
|
|
|
drm_mode_create_tv_properties(dev,
|
|
|
|
ARRAY_SIZE(tv_modes),
|
|
|
|
tv_format_names);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
|
2012-10-12 01:36:04 +00:00
|
|
|
drm_object_attach_property(&connector->base, dev->mode_config.tv_mode_property,
|
2017-04-10 09:07:08 +00:00
|
|
|
state->tv.mode);
|
2012-10-12 01:36:04 +00:00
|
|
|
drm_object_attach_property(&connector->base,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
dev->mode_config.tv_left_margin_property,
|
2017-04-10 09:07:08 +00:00
|
|
|
state->tv.margins.left);
|
2012-10-12 01:36:04 +00:00
|
|
|
drm_object_attach_property(&connector->base,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
dev->mode_config.tv_top_margin_property,
|
2017-04-10 09:07:08 +00:00
|
|
|
state->tv.margins.top);
|
2012-10-12 01:36:04 +00:00
|
|
|
drm_object_attach_property(&connector->base,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
dev->mode_config.tv_right_margin_property,
|
2017-04-10 09:07:08 +00:00
|
|
|
state->tv.margins.right);
|
2012-10-12 01:36:04 +00:00
|
|
|
drm_object_attach_property(&connector->base,
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
dev->mode_config.tv_bottom_margin_property,
|
2017-04-10 09:07:08 +00:00
|
|
|
state->tv.margins.bottom);
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 22:24:08 +00:00
|
|
|
}
|