2019-04-16 10:17:29 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
//
|
|
|
|
// tps80031-regulator.c -- TI TPS80031 regulator driver.
|
|
|
|
//
|
|
|
|
// Regulator driver for TI TPS80031/TPS80032 Fully Integrated Power
|
|
|
|
// Management with Power Path and Battery Charger.
|
|
|
|
//
|
|
|
|
// Copyright (c) 2012, NVIDIA Corporation.
|
|
|
|
//
|
|
|
|
// Author: Laxman Dewangan <ldewangan@nvidia.com>
|
2012-11-11 15:12:01 +00:00
|
|
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/mfd/tps80031.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/regulator/driver.h>
|
|
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
|
|
|
/* Flags for DCDC Voltage reading */
|
|
|
|
#define DCDC_OFFSET_EN BIT(0)
|
|
|
|
#define DCDC_EXTENDED_EN BIT(1)
|
|
|
|
#define TRACK_MODE_ENABLE BIT(2)
|
|
|
|
|
|
|
|
#define SMPS_MULTOFFSET_VIO BIT(1)
|
|
|
|
#define SMPS_MULTOFFSET_SMPS1 BIT(3)
|
|
|
|
#define SMPS_MULTOFFSET_SMPS2 BIT(4)
|
|
|
|
#define SMPS_MULTOFFSET_SMPS3 BIT(6)
|
|
|
|
#define SMPS_MULTOFFSET_SMPS4 BIT(0)
|
|
|
|
|
|
|
|
#define SMPS_CMD_MASK 0xC0
|
|
|
|
#define SMPS_VSEL_MASK 0x3F
|
|
|
|
#define LDO_VSEL_MASK 0x1F
|
|
|
|
#define LDO_TRACK_VSEL_MASK 0x3F
|
|
|
|
|
|
|
|
#define MISC2_LDOUSB_IN_VSYS BIT(4)
|
|
|
|
#define MISC2_LDOUSB_IN_PMID BIT(3)
|
|
|
|
#define MISC2_LDOUSB_IN_MASK 0x18
|
|
|
|
|
|
|
|
#define MISC2_LDO3_SEL_VIB_VAL BIT(0)
|
|
|
|
#define MISC2_LDO3_SEL_VIB_MASK 0x1
|
|
|
|
|
|
|
|
#define BOOST_HW_PWR_EN BIT(5)
|
|
|
|
#define BOOST_HW_PWR_EN_MASK BIT(5)
|
|
|
|
|
|
|
|
#define OPA_MODE_EN BIT(6)
|
|
|
|
#define OPA_MODE_EN_MASK BIT(6)
|
|
|
|
|
|
|
|
#define USB_VBUS_CTRL_SET 0x04
|
|
|
|
#define USB_VBUS_CTRL_CLR 0x05
|
|
|
|
#define VBUS_DISCHRG 0x20
|
|
|
|
|
|
|
|
struct tps80031_regulator_info {
|
|
|
|
/* Regulator register address.*/
|
|
|
|
u8 trans_reg;
|
|
|
|
u8 state_reg;
|
|
|
|
u8 force_reg;
|
|
|
|
u8 volt_reg;
|
|
|
|
u8 volt_id;
|
|
|
|
|
|
|
|
/*Power request bits */
|
|
|
|
int preq_bit;
|
|
|
|
|
|
|
|
/* used by regulator core */
|
|
|
|
struct regulator_desc desc;
|
|
|
|
|
|
|
|
};
|
|
|
|
|
|
|
|
struct tps80031_regulator {
|
|
|
|
struct device *dev;
|
|
|
|
struct tps80031_regulator_info *rinfo;
|
|
|
|
|
|
|
|
u8 device_flags;
|
|
|
|
unsigned int config_flags;
|
|
|
|
unsigned int ext_ctrl_flag;
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline struct device *to_tps80031_dev(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
return rdev_get_dev(rdev)->parent->parent;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps80031_reg_is_enabled(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
struct device *parent = to_tps80031_dev(rdev);
|
|
|
|
u8 reg_val;
|
|
|
|
int ret;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
|
2012-11-11 15:12:01 +00:00
|
|
|
return true;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_read(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
|
|
|
|
®_val);
|
2012-11-11 15:12:01 +00:00
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&rdev->dev, "Reg 0x%02x read failed, err = %d\n",
|
|
|
|
ri->rinfo->state_reg, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
2014-02-26 01:19:30 +00:00
|
|
|
return (reg_val & TPS80031_STATE_MASK) == TPS80031_STATE_ON;
|
2012-11-11 15:12:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int tps80031_reg_enable(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
struct device *parent = to_tps80031_dev(rdev);
|
|
|
|
int ret;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
|
2012-11-11 15:12:01 +00:00
|
|
|
return 0;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
|
|
|
|
TPS80031_STATE_ON, TPS80031_STATE_MASK);
|
2012-11-11 15:12:01 +00:00
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n",
|
|
|
|
ri->rinfo->state_reg, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps80031_reg_disable(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
struct device *parent = to_tps80031_dev(rdev);
|
|
|
|
int ret;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ)
|
2012-11-11 15:12:01 +00:00
|
|
|
return 0;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg,
|
|
|
|
TPS80031_STATE_OFF, TPS80031_STATE_MASK);
|
2012-11-11 15:12:01 +00:00
|
|
|
if (ret < 0)
|
|
|
|
dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n",
|
|
|
|
ri->rinfo->state_reg, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* DCDC voltages for the selector of 58 to 63 */
|
2019-04-16 10:17:28 +00:00
|
|
|
static const int tps80031_dcdc_voltages[4][5] = {
|
2012-11-11 15:12:01 +00:00
|
|
|
{ 1350, 1500, 1800, 1900, 2100},
|
|
|
|
{ 1350, 1500, 1800, 1900, 2100},
|
|
|
|
{ 2084, 2315, 2778, 2932, 3241},
|
|
|
|
{ 4167, 2315, 2778, 2932, 3241},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int tps80031_dcdc_list_voltage(struct regulator_dev *rdev, unsigned sel)
|
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
int volt_index = ri->device_flags & 0x3;
|
|
|
|
|
|
|
|
if (sel == 0)
|
|
|
|
return 0;
|
|
|
|
else if (sel < 58)
|
|
|
|
return regulator_list_voltage_linear(rdev, sel - 1);
|
|
|
|
else
|
|
|
|
return tps80031_dcdc_voltages[volt_index][sel - 58] * 1000;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps80031_dcdc_set_voltage_sel(struct regulator_dev *rdev,
|
|
|
|
unsigned vsel)
|
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
struct device *parent = to_tps80031_dev(rdev);
|
|
|
|
int ret;
|
|
|
|
u8 reg_val;
|
|
|
|
|
|
|
|
if (ri->rinfo->force_reg) {
|
|
|
|
ret = tps80031_read(parent, ri->rinfo->volt_id,
|
|
|
|
ri->rinfo->force_reg, ®_val);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
|
|
|
ri->rinfo->force_reg, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
if (!(reg_val & SMPS_CMD_MASK)) {
|
|
|
|
ret = tps80031_update(parent, ri->rinfo->volt_id,
|
|
|
|
ri->rinfo->force_reg, vsel, SMPS_VSEL_MASK);
|
|
|
|
if (ret < 0)
|
|
|
|
dev_err(ri->dev,
|
|
|
|
"reg 0x%02x update failed, e = %d\n",
|
|
|
|
ri->rinfo->force_reg, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
ret = tps80031_update(parent, ri->rinfo->volt_id,
|
|
|
|
ri->rinfo->volt_reg, vsel, SMPS_VSEL_MASK);
|
|
|
|
if (ret < 0)
|
|
|
|
dev_err(ri->dev, "reg 0x%02x update failed, e = %d\n",
|
|
|
|
ri->rinfo->volt_reg, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps80031_dcdc_get_voltage_sel(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
struct device *parent = to_tps80031_dev(rdev);
|
|
|
|
uint8_t vsel = 0;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (ri->rinfo->force_reg) {
|
|
|
|
ret = tps80031_read(parent, ri->rinfo->volt_id,
|
|
|
|
ri->rinfo->force_reg, &vsel);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
|
|
|
ri->rinfo->force_reg, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!(vsel & SMPS_CMD_MASK))
|
|
|
|
return vsel & SMPS_VSEL_MASK;
|
|
|
|
}
|
|
|
|
ret = tps80031_read(parent, ri->rinfo->volt_id,
|
|
|
|
ri->rinfo->volt_reg, &vsel);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
|
|
|
ri->rinfo->volt_reg, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return vsel & SMPS_VSEL_MASK;
|
|
|
|
}
|
|
|
|
|
regulator: tps80031: Fix LDO2 track mode for TPS80031 or TPS80032-ES1.0
Currently we have a special code in tps80031_ldo_set_voltage_sel() to handle
LDO2 track mode for TPS80031 or TPS80032-ES1.0. The purpose is to address below
issues:
Issue description:
- LDO2 traking mode is enabled
- LDO2 tracks SMPS2 voltage.
- LDO2 automatically switch-off when LDO2_CFG_VOLTAGE is changed to some discrete values (non exhaustive list):
00011001, 00011010, 00011011, 00011100, .
- LDO2 switch-on again when LDO2_CFG_VOLTAGE is changed to other values (non exhaustive list):
00011000, 00010111, .
LDOs have reserved codes. For these codes, LDO is switch-off.
In tracking, LDO2 ref comes from SMPS2.
However LDO2 enable is still gated by LDO2 VSEL decoding.
As a result, in tracking mode LDO2 will be disabled for following code (SMPS VSEL format):
000000 & 100000 (MSB not decoded)
011001 & 111001 (MSB not decoded)
011010 & 111010 (MSB not decoded)
011100 & 111100 (MSB not decoded)
011101 & 111101 (MSB not decoded)
011110 & 111110 (MSB not decoded)
However, current code has below bugs:
1. It uses regulator_list_voltage_linear, so list_voltage() still shows above
invalid selectors have supported voltage.
2. Current code may return -EINVAL in tps80031_ldo_set_voltage_sel() for
supported voltage. This is because when we use regulator_list_voltage_linear
as list_voltage callback, regulator core will default use
regulator_map_voltage_linear(). regulator_map_voltage_linear() has an
assumption that the voltages are linear which is not true for this case.
For example,
when request voltage range is: min_uV=950000 uV && max_uV=1200000 uV
regulator_map_voltage_linear() returns the selector is 29 (0x1D),
set_voltage_sel() returns -EINVAL.
(The selector is in invalid range, 0x19 ~ 0x1f).
In above case, map_voltage() should find the lowest valid voltage within
specific range (selector = 0x20) and set_voltage_sel() should successfully
set the voltage to 987500 uV.
This patch fixes these issues by:
1. Add checking valid setting for LDO2 track mode of TPS80031 or TPS80032-ES1.0
in list_voltage. So it returns -EINVAL for invalid selectors.
2. Implement tps80031_ldo_map_voltage, use regulator_map_voltage_iterate()
to find the lowest voltage within specific range for TPS80031 or
TPS80032-ES1.0. This is required when the voltage map is no longer linear.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-17 13:42:23 +00:00
|
|
|
static int tps80031_ldo_list_voltage(struct regulator_dev *rdev,
|
|
|
|
unsigned int sel)
|
2012-11-11 15:12:01 +00:00
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
struct device *parent = to_tps80031_dev(rdev);
|
|
|
|
|
|
|
|
/* Check for valid setting for TPS80031 or TPS80032-ES1.0 */
|
|
|
|
if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) &&
|
|
|
|
(ri->device_flags & TRACK_MODE_ENABLE)) {
|
|
|
|
unsigned nvsel = (sel) & 0x1F;
|
|
|
|
if (((tps80031_get_chip_info(parent) == TPS80031) ||
|
|
|
|
((tps80031_get_chip_info(parent) == TPS80032) &&
|
|
|
|
(tps80031_get_pmu_version(parent) == 0x0))) &&
|
|
|
|
((nvsel == 0x0) || (nvsel >= 0x19 && nvsel <= 0x1F))) {
|
|
|
|
dev_err(ri->dev,
|
|
|
|
"Invalid sel %d in track mode LDO2\n",
|
|
|
|
nvsel);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
regulator: tps80031: Fix LDO2 track mode for TPS80031 or TPS80032-ES1.0
Currently we have a special code in tps80031_ldo_set_voltage_sel() to handle
LDO2 track mode for TPS80031 or TPS80032-ES1.0. The purpose is to address below
issues:
Issue description:
- LDO2 traking mode is enabled
- LDO2 tracks SMPS2 voltage.
- LDO2 automatically switch-off when LDO2_CFG_VOLTAGE is changed to some discrete values (non exhaustive list):
00011001, 00011010, 00011011, 00011100, .
- LDO2 switch-on again when LDO2_CFG_VOLTAGE is changed to other values (non exhaustive list):
00011000, 00010111, .
LDOs have reserved codes. For these codes, LDO is switch-off.
In tracking, LDO2 ref comes from SMPS2.
However LDO2 enable is still gated by LDO2 VSEL decoding.
As a result, in tracking mode LDO2 will be disabled for following code (SMPS VSEL format):
000000 & 100000 (MSB not decoded)
011001 & 111001 (MSB not decoded)
011010 & 111010 (MSB not decoded)
011100 & 111100 (MSB not decoded)
011101 & 111101 (MSB not decoded)
011110 & 111110 (MSB not decoded)
However, current code has below bugs:
1. It uses regulator_list_voltage_linear, so list_voltage() still shows above
invalid selectors have supported voltage.
2. Current code may return -EINVAL in tps80031_ldo_set_voltage_sel() for
supported voltage. This is because when we use regulator_list_voltage_linear
as list_voltage callback, regulator core will default use
regulator_map_voltage_linear(). regulator_map_voltage_linear() has an
assumption that the voltages are linear which is not true for this case.
For example,
when request voltage range is: min_uV=950000 uV && max_uV=1200000 uV
regulator_map_voltage_linear() returns the selector is 29 (0x1D),
set_voltage_sel() returns -EINVAL.
(The selector is in invalid range, 0x19 ~ 0x1f).
In above case, map_voltage() should find the lowest valid voltage within
specific range (selector = 0x20) and set_voltage_sel() should successfully
set the voltage to 987500 uV.
This patch fixes these issues by:
1. Add checking valid setting for LDO2 track mode of TPS80031 or TPS80032-ES1.0
in list_voltage. So it returns -EINVAL for invalid selectors.
2. Implement tps80031_ldo_map_voltage, use regulator_map_voltage_iterate()
to find the lowest voltage within specific range for TPS80031 or
TPS80032-ES1.0. This is required when the voltage map is no longer linear.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-17 13:42:23 +00:00
|
|
|
return regulator_list_voltage_linear(rdev, sel);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps80031_ldo_map_voltage(struct regulator_dev *rdev,
|
|
|
|
int min_uV, int max_uV)
|
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
struct device *parent = to_tps80031_dev(rdev);
|
|
|
|
|
|
|
|
/* Check for valid setting for TPS80031 or TPS80032-ES1.0 */
|
|
|
|
if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) &&
|
|
|
|
(ri->device_flags & TRACK_MODE_ENABLE)) {
|
|
|
|
if (((tps80031_get_chip_info(parent) == TPS80031) ||
|
|
|
|
((tps80031_get_chip_info(parent) == TPS80032) &&
|
|
|
|
(tps80031_get_pmu_version(parent) == 0x0)))) {
|
|
|
|
return regulator_map_voltage_iterate(rdev, min_uV,
|
|
|
|
max_uV);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return regulator_map_voltage_linear(rdev, min_uV, max_uV);
|
|
|
|
}
|
|
|
|
|
2012-11-11 15:12:01 +00:00
|
|
|
static int tps80031_vbus_is_enabled(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
struct device *parent = to_tps80031_dev(rdev);
|
2020-04-10 13:34:06 +00:00
|
|
|
int ret;
|
2012-11-11 15:12:01 +00:00
|
|
|
uint8_t ctrl1 = 0;
|
|
|
|
uint8_t ctrl3 = 0;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_read(parent, TPS80031_SLAVE_ID2,
|
2012-11-11 15:12:01 +00:00
|
|
|
TPS80031_CHARGERUSB_CTRL1, &ctrl1);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
|
|
|
TPS80031_CHARGERUSB_CTRL1, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_read(parent, TPS80031_SLAVE_ID2,
|
2012-11-11 15:12:01 +00:00
|
|
|
TPS80031_CHARGERUSB_CTRL3, &ctrl3);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
2012-11-22 08:30:44 +00:00
|
|
|
TPS80031_CHARGERUSB_CTRL3, ret);
|
2012-11-11 15:12:01 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
if ((ctrl1 & OPA_MODE_EN) && (ctrl3 & BOOST_HW_PWR_EN))
|
|
|
|
return 1;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps80031_vbus_enable(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
struct device *parent = to_tps80031_dev(rdev);
|
|
|
|
int ret;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2,
|
2012-11-11 15:12:01 +00:00
|
|
|
TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
|
|
|
TPS80031_CHARGERUSB_CTRL1, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2,
|
2012-11-11 15:12:01 +00:00
|
|
|
TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n",
|
|
|
|
TPS80031_CHARGERUSB_CTRL3, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps80031_vbus_disable(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct tps80031_regulator *ri = rdev_get_drvdata(rdev);
|
|
|
|
struct device *parent = to_tps80031_dev(rdev);
|
2020-04-10 13:34:06 +00:00
|
|
|
int ret;
|
2012-11-11 15:12:01 +00:00
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) {
|
|
|
|
ret = tps80031_write(parent, TPS80031_SLAVE_ID2,
|
2012-11-11 15:12:01 +00:00
|
|
|
USB_VBUS_CTRL_SET, VBUS_DISCHRG);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n",
|
|
|
|
USB_VBUS_CTRL_SET, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2,
|
2012-11-11 15:12:01 +00:00
|
|
|
TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n",
|
|
|
|
TPS80031_CHARGERUSB_CTRL1, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2,
|
2012-11-11 15:12:01 +00:00
|
|
|
TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n",
|
|
|
|
TPS80031_CHARGERUSB_CTRL3, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
mdelay(DIV_ROUND_UP(ri->rinfo->desc.enable_time, 1000));
|
2012-11-14 15:39:29 +00:00
|
|
|
if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) {
|
|
|
|
ret = tps80031_write(parent, TPS80031_SLAVE_ID2,
|
2012-11-11 15:12:01 +00:00
|
|
|
USB_VBUS_CTRL_CLR, VBUS_DISCHRG);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n",
|
|
|
|
USB_VBUS_CTRL_CLR, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2019-04-16 10:17:28 +00:00
|
|
|
static const struct regulator_ops tps80031_dcdc_ops = {
|
2012-11-11 15:12:01 +00:00
|
|
|
.list_voltage = tps80031_dcdc_list_voltage,
|
|
|
|
.set_voltage_sel = tps80031_dcdc_set_voltage_sel,
|
|
|
|
.get_voltage_sel = tps80031_dcdc_get_voltage_sel,
|
|
|
|
.enable = tps80031_reg_enable,
|
|
|
|
.disable = tps80031_reg_disable,
|
|
|
|
.is_enabled = tps80031_reg_is_enabled,
|
|
|
|
};
|
|
|
|
|
2019-04-16 10:17:28 +00:00
|
|
|
static const struct regulator_ops tps80031_ldo_ops = {
|
regulator: tps80031: Fix LDO2 track mode for TPS80031 or TPS80032-ES1.0
Currently we have a special code in tps80031_ldo_set_voltage_sel() to handle
LDO2 track mode for TPS80031 or TPS80032-ES1.0. The purpose is to address below
issues:
Issue description:
- LDO2 traking mode is enabled
- LDO2 tracks SMPS2 voltage.
- LDO2 automatically switch-off when LDO2_CFG_VOLTAGE is changed to some discrete values (non exhaustive list):
00011001, 00011010, 00011011, 00011100, .
- LDO2 switch-on again when LDO2_CFG_VOLTAGE is changed to other values (non exhaustive list):
00011000, 00010111, .
LDOs have reserved codes. For these codes, LDO is switch-off.
In tracking, LDO2 ref comes from SMPS2.
However LDO2 enable is still gated by LDO2 VSEL decoding.
As a result, in tracking mode LDO2 will be disabled for following code (SMPS VSEL format):
000000 & 100000 (MSB not decoded)
011001 & 111001 (MSB not decoded)
011010 & 111010 (MSB not decoded)
011100 & 111100 (MSB not decoded)
011101 & 111101 (MSB not decoded)
011110 & 111110 (MSB not decoded)
However, current code has below bugs:
1. It uses regulator_list_voltage_linear, so list_voltage() still shows above
invalid selectors have supported voltage.
2. Current code may return -EINVAL in tps80031_ldo_set_voltage_sel() for
supported voltage. This is because when we use regulator_list_voltage_linear
as list_voltage callback, regulator core will default use
regulator_map_voltage_linear(). regulator_map_voltage_linear() has an
assumption that the voltages are linear which is not true for this case.
For example,
when request voltage range is: min_uV=950000 uV && max_uV=1200000 uV
regulator_map_voltage_linear() returns the selector is 29 (0x1D),
set_voltage_sel() returns -EINVAL.
(The selector is in invalid range, 0x19 ~ 0x1f).
In above case, map_voltage() should find the lowest valid voltage within
specific range (selector = 0x20) and set_voltage_sel() should successfully
set the voltage to 987500 uV.
This patch fixes these issues by:
1. Add checking valid setting for LDO2 track mode of TPS80031 or TPS80032-ES1.0
in list_voltage. So it returns -EINVAL for invalid selectors.
2. Implement tps80031_ldo_map_voltage, use regulator_map_voltage_iterate()
to find the lowest voltage within specific range for TPS80031 or
TPS80032-ES1.0. This is required when the voltage map is no longer linear.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-17 13:42:23 +00:00
|
|
|
.list_voltage = tps80031_ldo_list_voltage,
|
|
|
|
.map_voltage = tps80031_ldo_map_voltage,
|
2013-04-17 13:43:39 +00:00
|
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
2012-11-11 15:12:01 +00:00
|
|
|
.enable = tps80031_reg_enable,
|
|
|
|
.disable = tps80031_reg_disable,
|
|
|
|
.is_enabled = tps80031_reg_is_enabled,
|
|
|
|
};
|
|
|
|
|
2019-04-16 10:17:28 +00:00
|
|
|
static const struct regulator_ops tps80031_vbus_sw_ops = {
|
2012-11-23 01:25:54 +00:00
|
|
|
.list_voltage = regulator_list_voltage_linear,
|
2012-11-11 15:12:01 +00:00
|
|
|
.enable = tps80031_vbus_enable,
|
|
|
|
.disable = tps80031_vbus_disable,
|
|
|
|
.is_enabled = tps80031_vbus_is_enabled,
|
|
|
|
};
|
|
|
|
|
2019-04-16 10:17:28 +00:00
|
|
|
static const struct regulator_ops tps80031_vbus_hw_ops = {
|
2012-11-23 01:25:54 +00:00
|
|
|
.list_voltage = regulator_list_voltage_linear,
|
2012-11-11 15:12:01 +00:00
|
|
|
};
|
|
|
|
|
2019-04-16 10:17:28 +00:00
|
|
|
static const struct regulator_ops tps80031_ext_reg_ops = {
|
2012-11-23 01:25:54 +00:00
|
|
|
.list_voltage = regulator_list_voltage_linear,
|
2012-11-11 15:12:01 +00:00
|
|
|
.enable = tps80031_reg_enable,
|
|
|
|
.disable = tps80031_reg_disable,
|
|
|
|
.is_enabled = tps80031_reg_is_enabled,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Non-exiting default definition for some register */
|
|
|
|
#define TPS80031_SMPS3_CFG_FORCE 0
|
|
|
|
#define TPS80031_SMPS4_CFG_FORCE 0
|
|
|
|
|
|
|
|
#define TPS80031_VBUS_CFG_TRANS 0
|
|
|
|
#define TPS80031_VBUS_CFG_STATE 0
|
|
|
|
|
|
|
|
#define TPS80031_REG_SMPS(_id, _volt_id, _pbit) \
|
|
|
|
{ \
|
|
|
|
.trans_reg = TPS80031_##_id##_CFG_TRANS, \
|
|
|
|
.state_reg = TPS80031_##_id##_CFG_STATE, \
|
|
|
|
.force_reg = TPS80031_##_id##_CFG_FORCE, \
|
|
|
|
.volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \
|
2012-11-14 15:39:29 +00:00
|
|
|
.volt_id = TPS80031_SLAVE_##_volt_id, \
|
2012-11-11 15:12:01 +00:00
|
|
|
.preq_bit = _pbit, \
|
|
|
|
.desc = { \
|
|
|
|
.name = "tps80031_"#_id, \
|
|
|
|
.id = TPS80031_REGULATOR_##_id, \
|
|
|
|
.n_voltages = 63, \
|
|
|
|
.ops = &tps80031_dcdc_ops, \
|
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.enable_time = 500, \
|
|
|
|
}, \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define TPS80031_REG_LDO(_id, _preq_bit) \
|
|
|
|
{ \
|
|
|
|
.trans_reg = TPS80031_##_id##_CFG_TRANS, \
|
|
|
|
.state_reg = TPS80031_##_id##_CFG_STATE, \
|
|
|
|
.volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \
|
2012-11-14 15:39:29 +00:00
|
|
|
.volt_id = TPS80031_SLAVE_ID1, \
|
2012-11-11 15:12:01 +00:00
|
|
|
.preq_bit = _preq_bit, \
|
|
|
|
.desc = { \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.name = "tps80031_"#_id, \
|
|
|
|
.id = TPS80031_REGULATOR_##_id, \
|
|
|
|
.ops = &tps80031_ldo_ops, \
|
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.min_uV = 1000000, \
|
|
|
|
.uV_step = 100000, \
|
2012-12-06 00:24:11 +00:00
|
|
|
.linear_min_sel = 1, \
|
2012-11-11 15:12:01 +00:00
|
|
|
.n_voltages = 25, \
|
2013-04-17 13:43:39 +00:00
|
|
|
.vsel_reg = TPS80031_##_id##_CFG_VOLTAGE, \
|
2012-11-11 15:12:01 +00:00
|
|
|
.vsel_mask = LDO_VSEL_MASK, \
|
|
|
|
.enable_time = 500, \
|
|
|
|
}, \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define TPS80031_REG_FIXED(_id, max_mV, _ops, _delay, _pbit) \
|
|
|
|
{ \
|
|
|
|
.trans_reg = TPS80031_##_id##_CFG_TRANS, \
|
|
|
|
.state_reg = TPS80031_##_id##_CFG_STATE, \
|
2012-11-14 15:39:29 +00:00
|
|
|
.volt_id = TPS80031_SLAVE_ID1, \
|
2012-11-11 15:12:01 +00:00
|
|
|
.preq_bit = _pbit, \
|
|
|
|
.desc = { \
|
|
|
|
.name = "tps80031_"#_id, \
|
|
|
|
.id = TPS80031_REGULATOR_##_id, \
|
2012-11-23 01:25:54 +00:00
|
|
|
.min_uV = max_mV * 1000, \
|
|
|
|
.n_voltages = 1, \
|
2012-11-11 15:12:01 +00:00
|
|
|
.ops = &_ops, \
|
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.enable_time = _delay, \
|
|
|
|
}, \
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct tps80031_regulator_info tps80031_rinfo[TPS80031_REGULATOR_MAX] = {
|
|
|
|
TPS80031_REG_SMPS(VIO, ID0, 4),
|
|
|
|
TPS80031_REG_SMPS(SMPS1, ID0, 0),
|
|
|
|
TPS80031_REG_SMPS(SMPS2, ID0, 1),
|
|
|
|
TPS80031_REG_SMPS(SMPS3, ID1, 2),
|
|
|
|
TPS80031_REG_SMPS(SMPS4, ID1, 3),
|
|
|
|
TPS80031_REG_LDO(VANA, -1),
|
|
|
|
TPS80031_REG_LDO(LDO1, 8),
|
|
|
|
TPS80031_REG_LDO(LDO2, 9),
|
|
|
|
TPS80031_REG_LDO(LDO3, 10),
|
|
|
|
TPS80031_REG_LDO(LDO4, 11),
|
|
|
|
TPS80031_REG_LDO(LDO5, 12),
|
|
|
|
TPS80031_REG_LDO(LDO6, 13),
|
|
|
|
TPS80031_REG_LDO(LDO7, 14),
|
|
|
|
TPS80031_REG_LDO(LDOLN, 15),
|
|
|
|
TPS80031_REG_LDO(LDOUSB, 5),
|
|
|
|
TPS80031_REG_FIXED(VBUS, 5000, tps80031_vbus_hw_ops, 100000, -1),
|
|
|
|
TPS80031_REG_FIXED(REGEN1, 3300, tps80031_ext_reg_ops, 0, 16),
|
|
|
|
TPS80031_REG_FIXED(REGEN2, 3300, tps80031_ext_reg_ops, 0, 17),
|
|
|
|
TPS80031_REG_FIXED(SYSEN, 3300, tps80031_ext_reg_ops, 0, 18),
|
|
|
|
};
|
|
|
|
|
|
|
|
static int tps80031_power_req_config(struct device *parent,
|
|
|
|
struct tps80031_regulator *ri,
|
|
|
|
struct tps80031_regulator_platform_data *tps80031_pdata)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
if (ri->rinfo->preq_bit < 0)
|
|
|
|
goto skip_pwr_req_config;
|
|
|
|
|
|
|
|
ret = tps80031_ext_power_req_config(parent, ri->ext_ctrl_flag,
|
|
|
|
ri->rinfo->preq_bit, ri->rinfo->state_reg,
|
|
|
|
ri->rinfo->trans_reg);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "ext powerreq config failed, err = %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
skip_pwr_req_config:
|
2012-11-14 15:39:29 +00:00
|
|
|
if (tps80031_pdata->ext_ctrl_flag & TPS80031_PWR_ON_ON_SLEEP) {
|
|
|
|
ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
|
|
|
|
ri->rinfo->trans_reg, TPS80031_TRANS_SLEEP_ON,
|
|
|
|
TPS80031_TRANS_SLEEP_MASK);
|
2012-11-11 15:12:01 +00:00
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "Reg 0x%02x update failed, e %d\n",
|
|
|
|
ri->rinfo->trans_reg, ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tps80031_regulator_config(struct device *parent,
|
|
|
|
struct tps80031_regulator *ri,
|
|
|
|
struct tps80031_regulator_platform_data *tps80031_pdata)
|
|
|
|
{
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
switch (ri->rinfo->desc.id) {
|
|
|
|
case TPS80031_REGULATOR_LDOUSB:
|
2012-11-14 15:39:29 +00:00
|
|
|
if (ri->config_flags & (TPS80031_USBLDO_INPUT_VSYS |
|
|
|
|
TPS80031_USBLDO_INPUT_PMID)) {
|
2020-04-10 13:34:06 +00:00
|
|
|
unsigned val;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
if (ri->config_flags & TPS80031_USBLDO_INPUT_VSYS)
|
2012-11-11 15:12:01 +00:00
|
|
|
val = MISC2_LDOUSB_IN_VSYS;
|
|
|
|
else
|
|
|
|
val = MISC2_LDOUSB_IN_PMID;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
|
|
|
|
TPS80031_MISC2, val,
|
|
|
|
MISC2_LDOUSB_IN_MASK);
|
2012-11-11 15:12:01 +00:00
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev,
|
|
|
|
"LDOUSB config failed, e= %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case TPS80031_REGULATOR_LDO3:
|
2012-11-14 15:39:29 +00:00
|
|
|
if (ri->config_flags & TPS80031_LDO3_OUTPUT_VIB) {
|
|
|
|
ret = tps80031_update(parent, TPS80031_SLAVE_ID1,
|
2012-11-11 15:12:01 +00:00
|
|
|
TPS80031_MISC2, MISC2_LDO3_SEL_VIB_VAL,
|
|
|
|
MISC2_LDO3_SEL_VIB_MASK);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev,
|
|
|
|
"LDO3 config failed, e = %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case TPS80031_REGULATOR_VBUS:
|
|
|
|
/* Provide SW control Ops if VBUS is SW control */
|
2012-11-14 15:39:29 +00:00
|
|
|
if (!(ri->config_flags & TPS80031_VBUS_SW_ONLY))
|
2012-11-11 15:12:01 +00:00
|
|
|
ri->rinfo->desc.ops = &tps80031_vbus_sw_ops;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Configure Active state to ON, SLEEP to OFF and OFF_state to OFF */
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->trans_reg,
|
|
|
|
TPS80031_TRANS_ACTIVE_ON | TPS80031_TRANS_SLEEP_OFF |
|
|
|
|
TPS80031_TRANS_OFF_OFF, TPS80031_TRANS_ACTIVE_MASK |
|
|
|
|
TPS80031_TRANS_SLEEP_MASK | TPS80031_TRANS_OFF_MASK);
|
2012-11-11 15:12:01 +00:00
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(ri->dev, "trans reg update failed, e %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int check_smps_mode_mult(struct device *parent,
|
|
|
|
struct tps80031_regulator *ri)
|
|
|
|
{
|
|
|
|
int mult_offset;
|
|
|
|
int ret;
|
|
|
|
u8 smps_offset;
|
|
|
|
u8 smps_mult;
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_read(parent, TPS80031_SLAVE_ID1,
|
2012-11-11 15:12:01 +00:00
|
|
|
TPS80031_SMPS_OFFSET, &smps_offset);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(parent, "Error in reading smps offset register\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2012-11-14 15:39:29 +00:00
|
|
|
ret = tps80031_read(parent, TPS80031_SLAVE_ID1,
|
2012-11-11 15:12:01 +00:00
|
|
|
TPS80031_SMPS_MULT, &smps_mult);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(parent, "Error in reading smps mult register\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (ri->rinfo->desc.id) {
|
|
|
|
case TPS80031_REGULATOR_VIO:
|
|
|
|
mult_offset = SMPS_MULTOFFSET_VIO;
|
|
|
|
break;
|
|
|
|
case TPS80031_REGULATOR_SMPS1:
|
|
|
|
mult_offset = SMPS_MULTOFFSET_SMPS1;
|
|
|
|
break;
|
|
|
|
case TPS80031_REGULATOR_SMPS2:
|
|
|
|
mult_offset = SMPS_MULTOFFSET_SMPS2;
|
|
|
|
break;
|
|
|
|
case TPS80031_REGULATOR_SMPS3:
|
|
|
|
mult_offset = SMPS_MULTOFFSET_SMPS3;
|
|
|
|
break;
|
|
|
|
case TPS80031_REGULATOR_SMPS4:
|
|
|
|
mult_offset = SMPS_MULTOFFSET_SMPS4;
|
|
|
|
break;
|
|
|
|
case TPS80031_REGULATOR_LDO2:
|
|
|
|
ri->device_flags = smps_mult & BIT(5) ? TRACK_MODE_ENABLE : 0;
|
|
|
|
/* TRACK mode the ldo2 varies from 600mV to 1300mV */
|
|
|
|
if (ri->device_flags & TRACK_MODE_ENABLE) {
|
|
|
|
ri->rinfo->desc.min_uV = 600000;
|
|
|
|
ri->rinfo->desc.uV_step = 12500;
|
|
|
|
ri->rinfo->desc.n_voltages = 57;
|
|
|
|
ri->rinfo->desc.vsel_mask = LDO_TRACK_VSEL_MASK;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
default:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
ri->device_flags = (smps_offset & mult_offset) ? DCDC_OFFSET_EN : 0;
|
|
|
|
ri->device_flags |= (smps_mult & mult_offset) ? DCDC_EXTENDED_EN : 0;
|
|
|
|
switch (ri->device_flags) {
|
|
|
|
case 0:
|
|
|
|
ri->rinfo->desc.min_uV = 607700;
|
|
|
|
ri->rinfo->desc.uV_step = 12660;
|
|
|
|
break;
|
|
|
|
case DCDC_OFFSET_EN:
|
|
|
|
ri->rinfo->desc.min_uV = 700000;
|
|
|
|
ri->rinfo->desc.uV_step = 12500;
|
|
|
|
break;
|
|
|
|
case DCDC_EXTENDED_EN:
|
|
|
|
ri->rinfo->desc.min_uV = 1852000;
|
|
|
|
ri->rinfo->desc.uV_step = 38600;
|
|
|
|
break;
|
|
|
|
case DCDC_OFFSET_EN | DCDC_EXTENDED_EN:
|
|
|
|
ri->rinfo->desc.min_uV = 2161000;
|
|
|
|
ri->rinfo->desc.uV_step = 38600;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-11-19 18:22:22 +00:00
|
|
|
static int tps80031_regulator_probe(struct platform_device *pdev)
|
2012-11-11 15:12:01 +00:00
|
|
|
{
|
|
|
|
struct tps80031_platform_data *pdata;
|
|
|
|
struct tps80031_regulator_platform_data *tps_pdata;
|
|
|
|
struct tps80031_regulator *ri;
|
|
|
|
struct tps80031_regulator *pmic;
|
|
|
|
struct regulator_dev *rdev;
|
|
|
|
struct regulator_config config = { };
|
2013-04-17 13:43:39 +00:00
|
|
|
struct tps80031 *tps80031_mfd = dev_get_drvdata(pdev->dev.parent);
|
2012-11-11 15:12:01 +00:00
|
|
|
int ret;
|
|
|
|
int num;
|
|
|
|
|
|
|
|
pdata = dev_get_platdata(pdev->dev.parent);
|
|
|
|
|
|
|
|
if (!pdata) {
|
|
|
|
dev_err(&pdev->dev, "No platform data\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
treewide: devm_kzalloc() -> devm_kcalloc()
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:
devm_kzalloc(handle, a * b, gfp)
with:
devm_kcalloc(handle, a * b, gfp)
as well as handling cases of:
devm_kzalloc(handle, a * b * c, gfp)
with:
devm_kzalloc(handle, array3_size(a, b, c), gfp)
as it's slightly less ugly than:
devm_kcalloc(handle, array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
devm_kzalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
devm_kzalloc(HANDLE,
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
devm_kzalloc(HANDLE,
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
devm_kzalloc(HANDLE,
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE,
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * E2
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * (E2)
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
|
|
|
pmic = devm_kcalloc(&pdev->dev,
|
|
|
|
TPS80031_REGULATOR_MAX, sizeof(*pmic), GFP_KERNEL);
|
2014-02-20 08:53:19 +00:00
|
|
|
if (!pmic)
|
2012-11-11 15:12:01 +00:00
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
for (num = 0; num < TPS80031_REGULATOR_MAX; ++num) {
|
|
|
|
tps_pdata = pdata->regulator_pdata[num];
|
|
|
|
ri = &pmic[num];
|
2012-11-22 08:30:44 +00:00
|
|
|
ri->rinfo = &tps80031_rinfo[num];
|
2012-11-11 15:12:01 +00:00
|
|
|
ri->dev = &pdev->dev;
|
|
|
|
|
|
|
|
check_smps_mode_mult(pdev->dev.parent, ri);
|
|
|
|
config.dev = &pdev->dev;
|
|
|
|
config.init_data = NULL;
|
|
|
|
config.driver_data = ri;
|
2013-04-17 13:43:39 +00:00
|
|
|
config.regmap = tps80031_mfd->regmap[ri->rinfo->volt_id];
|
|
|
|
|
2012-11-11 15:12:01 +00:00
|
|
|
if (tps_pdata) {
|
|
|
|
config.init_data = tps_pdata->reg_init_data;
|
|
|
|
ri->config_flags = tps_pdata->config_flags;
|
|
|
|
ri->ext_ctrl_flag = tps_pdata->ext_ctrl_flag;
|
|
|
|
ret = tps80031_regulator_config(pdev->dev.parent,
|
|
|
|
ri, tps_pdata);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"regulator config failed, e %d\n", ret);
|
2013-09-04 11:47:53 +00:00
|
|
|
return ret;
|
2012-11-11 15:12:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
ret = tps80031_power_req_config(pdev->dev.parent,
|
|
|
|
ri, tps_pdata);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"pwr_req config failed, err %d\n", ret);
|
2013-09-04 11:47:53 +00:00
|
|
|
return ret;
|
2012-11-11 15:12:01 +00:00
|
|
|
}
|
|
|
|
}
|
2013-09-04 11:47:53 +00:00
|
|
|
rdev = devm_regulator_register(&pdev->dev, &ri->rinfo->desc,
|
|
|
|
&config);
|
2013-01-25 13:29:41 +00:00
|
|
|
if (IS_ERR(rdev)) {
|
2012-11-11 15:12:01 +00:00
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"register regulator failed %s\n",
|
|
|
|
ri->rinfo->desc.name);
|
2013-09-04 11:47:53 +00:00
|
|
|
return PTR_ERR(rdev);
|
2012-11-11 15:12:01 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, pmic);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver tps80031_regulator_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "tps80031-pmic",
|
|
|
|
},
|
|
|
|
.probe = tps80031_regulator_probe,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init tps80031_regulator_init(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&tps80031_regulator_driver);
|
|
|
|
}
|
|
|
|
subsys_initcall(tps80031_regulator_init);
|
|
|
|
|
|
|
|
static void __exit tps80031_regulator_exit(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&tps80031_regulator_driver);
|
|
|
|
}
|
|
|
|
module_exit(tps80031_regulator_exit);
|
|
|
|
|
|
|
|
MODULE_ALIAS("platform:tps80031-regulator");
|
2012-11-22 08:30:44 +00:00
|
|
|
MODULE_DESCRIPTION("Regulator Driver for TI TPS80031/TPS80032 PMIC");
|
2012-11-11 15:12:01 +00:00
|
|
|
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
|
|
|
|
MODULE_LICENSE("GPL v2");
|