linux/drivers/idle/intel_idle.c

1483 lines
36 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* intel_idle.c - native hardware idle loop for modern Intel processors
*
* Copyright (c) 2013, Intel Corporation.
* Len Brown <len.brown@intel.com>
*/
/*
* intel_idle is a cpuidle driver that loads on specific Intel processors
* in lieu of the legacy ACPI processor_idle driver. The intent is to
* make Linux more efficient on these processors, as intel_idle knows
* more than ACPI, as well as make Linux more immune to ACPI BIOS bugs.
*/
/*
* Design Assumptions
*
* All CPUs have same idle states as boot CPU
*
* Chipset BM_STS (bus master status) bit is a NOP
* for preventing entry into deep C-stats
*/
/*
* Known limitations
*
* The driver currently initializes for_each_online_cpu() upon modprobe.
* It it unaware of subsequent processors hot-added to the system.
* This means that if you boot with maxcpus=n and later online
* processors above n, those processors will use C1 only.
*
* ACPI has a .suspend hack to turn off deep c-statees during suspend
* to avoid complications with the lapic timer workaround.
* Have not seen issues with suspend, but may need same workaround here.
*
*/
/* un-comment DEBUG to enable pr_debug() statements */
#define DEBUG
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/cpuidle.h>
#include <linux/tick.h>
#include <trace/events/power.h>
#include <linux/sched.h>
#include <linux/notifier.h>
#include <linux/cpu.h>
drivers/idle: make intel_idle.c driver more explicitly non-modular The Kconfig for this driver is currently declared with: config INTEL_IDLE bool "Cpuidle Driver for Intel Processors" ...meaning that it currently is not being built as a module by anyone. This was done in commit 6ce9cd8669fa1195fdc21643370e34523c7ac988 ("intel_idle: disable module support") since "...the module capability is cauing more trouble than it is worth." This was done over 5y ago, and Daniel adds that: ...the modular support has been removed from almost all the cpuidle drivers and the cpuidle framework is no longer assuming driver could be unloaded. Removing the modular dead code in the driver makes sense as this what have been done in the others drivers. So lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. At a later date we might want to consider whether subsys_init or another init category seems more appropriate than device_init. We replace module.h with moduleparam.h since the file does declare some module parameters, and leaving them as such is currently the easiest way to remain compatible with existing boot arg use cases. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Also note that we can't remove intel_idle_cpuidle_devices_uninit() as that is still used for unwind purposes if the init fails. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-17 05:28:33 +00:00
#include <linux/moduleparam.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include <asm/mwait.h>
#include <asm/msr.h>
#define INTEL_IDLE_VERSION "0.4.1"
static struct cpuidle_driver intel_idle_driver = {
.name = "intel_idle",
.owner = THIS_MODULE,
};
/* intel_idle.max_cstate=0 disables driver */
static int max_cstate = CPUIDLE_STATE_MAX - 1;
static unsigned int mwait_substates;
#define LAPIC_TIMER_ALWAYS_RELIABLE 0xFFFFFFFF
/* Reliable LAPIC Timer States, bit 1 for C1 etc. */
static unsigned int lapic_timer_reliable_states = (1 << 1); /* Default to only C1 */
struct idle_cpu {
struct cpuidle_state *state_table;
/*
* Hardware C-state auto-demotion may not always be optimal.
* Indicate which enable bits to clear here.
*/
unsigned long auto_demotion_disable_flags;
bool byt_auto_demotion_disable_flag;
bool disable_promotion_to_c1e;
};
static const struct idle_cpu *icpu;
static struct cpuidle_device __percpu *intel_idle_cpuidle_devices;
static int intel_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
static void intel_idle_s2idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
static struct cpuidle_state *cpuidle_state_table;
/*
* Set this flag for states where the HW flushes the TLB for us
* and so we don't need cross-calls to keep it consistent.
* If this flag is set, SW flushes the TLB, so even if the
* HW doesn't do the flushing, this flag is safe to use.
*/
#define CPUIDLE_FLAG_TLB_FLUSHED 0x10000
/*
* MWAIT takes an 8-bit "hint" in EAX "suggesting"
* the C-state (top nibble) and sub-state (bottom nibble)
* 0x00 means "MWAIT(C1)", 0x10 means "MWAIT(C2)" etc.
*
* We store the hint at the top of our "flags" for each state.
*/
#define flg2MWAIT(flags) (((flags) >> 24) & 0xFF)
#define MWAIT2flg(eax) ((eax & 0xFF) << 24)
/*
* States are indexed by the cstate number,
* which is also the index into the MWAIT hint array.
* Thus C0 is a dummy.
*/
Revert "intel_idle: mark states tables with __initdata tag" This reverts commit 9d046ccb98085f1d437585f84748c783a04ba240. Commit 9d046ccb98085 marks all state tables with __initdata, but the state table may be accessed when doing CPU online, which then causing system crash as below: [ 204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8 [ 204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062 [ 204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio [ 204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48 [ 204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013 [ 204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000 [ 204.290311] RIP: 0010:[<ffffffff814aa1c0>] [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.300184] RSP: 0018:ffff880440fadd28 EFLAGS: 00010286 [ 204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007 [ 204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120 [ 204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001 [ 204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e [ 204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000 [ 204.346743] FS: 00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000 [ 204.355919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0 [ 204.370520] Stack: [ 204.372853] 000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307 [ 204.381519] ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000 [ 204.390196] 000000000000001e 0000000000000002 0000000000000002 0000000000000000 [ 204.398856] Call Trace: [ 204.401683] [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70 [ 204.408638] [<ffffffff8185a230>] notifier_call_chain+0x100/0x150 [ 204.415553] [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10 [ 204.422772] [<ffffffff81072163>] cpu_notify+0x23/0x50 [ 204.428616] [<ffffffff810723b2>] _cpu_up+0x132/0x1a0 [ 204.434361] [<ffffffff8107249d>] cpu_up+0x7d/0xa0 [ 204.439819] [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90 [ 204.446345] [<ffffffff81554625>] device_online+0x45/0xa0 [ 204.452471] [<ffffffff815546ce>] online_store+0x4e/0x80 [ 204.458511] [<ffffffff815519a8>] dev_attr_store+0x18/0x30 [ 204.464744] [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0 [ 204.471681] [<ffffffff81217ef1>] vfs_write+0xe1/0x160 [ 204.477524] [<ffffffff8121889c>] SyS_write+0x4c/0x90 [ 204.483270] [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f [ 204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79 [ 204.515723] RIP [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.522996] RSP <ffff880440fadd28> [ 204.526976] CR2: ffffffff8227cce8 [ 204.530766] ---[ end trace 336f56cc3d1cfc8c ]--- Fixes: 9d046ccb98085 (intel_idle: mark states tables with __initdata tag) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 07:30:26 +00:00
static struct cpuidle_state nehalem_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 3,
.target_residency = 6,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C3",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 20,
.target_residency = 80,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 200,
.target_residency = 800,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
Revert "intel_idle: mark states tables with __initdata tag" This reverts commit 9d046ccb98085f1d437585f84748c783a04ba240. Commit 9d046ccb98085 marks all state tables with __initdata, but the state table may be accessed when doing CPU online, which then causing system crash as below: [ 204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8 [ 204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062 [ 204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio [ 204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48 [ 204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013 [ 204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000 [ 204.290311] RIP: 0010:[<ffffffff814aa1c0>] [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.300184] RSP: 0018:ffff880440fadd28 EFLAGS: 00010286 [ 204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007 [ 204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120 [ 204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001 [ 204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e [ 204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000 [ 204.346743] FS: 00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000 [ 204.355919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0 [ 204.370520] Stack: [ 204.372853] 000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307 [ 204.381519] ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000 [ 204.390196] 000000000000001e 0000000000000002 0000000000000002 0000000000000000 [ 204.398856] Call Trace: [ 204.401683] [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70 [ 204.408638] [<ffffffff8185a230>] notifier_call_chain+0x100/0x150 [ 204.415553] [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10 [ 204.422772] [<ffffffff81072163>] cpu_notify+0x23/0x50 [ 204.428616] [<ffffffff810723b2>] _cpu_up+0x132/0x1a0 [ 204.434361] [<ffffffff8107249d>] cpu_up+0x7d/0xa0 [ 204.439819] [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90 [ 204.446345] [<ffffffff81554625>] device_online+0x45/0xa0 [ 204.452471] [<ffffffff815546ce>] online_store+0x4e/0x80 [ 204.458511] [<ffffffff815519a8>] dev_attr_store+0x18/0x30 [ 204.464744] [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0 [ 204.471681] [<ffffffff81217ef1>] vfs_write+0xe1/0x160 [ 204.477524] [<ffffffff8121889c>] SyS_write+0x4c/0x90 [ 204.483270] [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f [ 204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79 [ 204.515723] RIP [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.522996] RSP <ffff880440fadd28> [ 204.526976] CR2: ffffffff8227cce8 [ 204.530766] ---[ end trace 336f56cc3d1cfc8c ]--- Fixes: 9d046ccb98085 (intel_idle: mark states tables with __initdata tag) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 07:30:26 +00:00
static struct cpuidle_state snb_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C3",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 80,
.target_residency = 211,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 104,
.target_residency = 345,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7",
.desc = "MWAIT 0x30",
.flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 109,
.target_residency = 345,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state byt_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6N",
.desc = "MWAIT 0x58",
.flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 300,
.target_residency = 275,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6S",
.desc = "MWAIT 0x52",
.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 500,
.target_residency = 560,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7",
.desc = "MWAIT 0x60",
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 1200,
.target_residency = 4000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7S",
.desc = "MWAIT 0x64",
.flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 10000,
.target_residency = 20000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state cht_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6N",
.desc = "MWAIT 0x58",
.flags = MWAIT2flg(0x58) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 80,
.target_residency = 275,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6S",
.desc = "MWAIT 0x52",
.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 200,
.target_residency = 560,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7",
.desc = "MWAIT 0x60",
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 1200,
.target_residency = 4000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7S",
.desc = "MWAIT 0x64",
.flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 10000,
.target_residency = 20000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
Revert "intel_idle: mark states tables with __initdata tag" This reverts commit 9d046ccb98085f1d437585f84748c783a04ba240. Commit 9d046ccb98085 marks all state tables with __initdata, but the state table may be accessed when doing CPU online, which then causing system crash as below: [ 204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8 [ 204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062 [ 204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio [ 204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48 [ 204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013 [ 204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000 [ 204.290311] RIP: 0010:[<ffffffff814aa1c0>] [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.300184] RSP: 0018:ffff880440fadd28 EFLAGS: 00010286 [ 204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007 [ 204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120 [ 204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001 [ 204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e [ 204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000 [ 204.346743] FS: 00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000 [ 204.355919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0 [ 204.370520] Stack: [ 204.372853] 000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307 [ 204.381519] ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000 [ 204.390196] 000000000000001e 0000000000000002 0000000000000002 0000000000000000 [ 204.398856] Call Trace: [ 204.401683] [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70 [ 204.408638] [<ffffffff8185a230>] notifier_call_chain+0x100/0x150 [ 204.415553] [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10 [ 204.422772] [<ffffffff81072163>] cpu_notify+0x23/0x50 [ 204.428616] [<ffffffff810723b2>] _cpu_up+0x132/0x1a0 [ 204.434361] [<ffffffff8107249d>] cpu_up+0x7d/0xa0 [ 204.439819] [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90 [ 204.446345] [<ffffffff81554625>] device_online+0x45/0xa0 [ 204.452471] [<ffffffff815546ce>] online_store+0x4e/0x80 [ 204.458511] [<ffffffff815519a8>] dev_attr_store+0x18/0x30 [ 204.464744] [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0 [ 204.471681] [<ffffffff81217ef1>] vfs_write+0xe1/0x160 [ 204.477524] [<ffffffff8121889c>] SyS_write+0x4c/0x90 [ 204.483270] [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f [ 204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79 [ 204.515723] RIP [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.522996] RSP <ffff880440fadd28> [ 204.526976] CR2: ffffffff8227cce8 [ 204.530766] ---[ end trace 336f56cc3d1cfc8c ]--- Fixes: 9d046ccb98085 (intel_idle: mark states tables with __initdata tag) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 07:30:26 +00:00
static struct cpuidle_state ivb_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C3",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 59,
.target_residency = 156,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 80,
.target_residency = 300,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7",
.desc = "MWAIT 0x30",
.flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 87,
.target_residency = 300,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state ivt_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 80,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C3",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 59,
.target_residency = 156,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 82,
.target_residency = 300,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state ivt_cstates_4s[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 250,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C3",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 59,
.target_residency = 300,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 84,
.target_residency = 400,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state ivt_cstates_8s[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 1,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 500,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C3",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 59,
.target_residency = 600,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 88,
.target_residency = 700,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
Revert "intel_idle: mark states tables with __initdata tag" This reverts commit 9d046ccb98085f1d437585f84748c783a04ba240. Commit 9d046ccb98085 marks all state tables with __initdata, but the state table may be accessed when doing CPU online, which then causing system crash as below: [ 204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8 [ 204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062 [ 204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio [ 204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48 [ 204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013 [ 204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000 [ 204.290311] RIP: 0010:[<ffffffff814aa1c0>] [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.300184] RSP: 0018:ffff880440fadd28 EFLAGS: 00010286 [ 204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007 [ 204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120 [ 204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001 [ 204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e [ 204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000 [ 204.346743] FS: 00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000 [ 204.355919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0 [ 204.370520] Stack: [ 204.372853] 000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307 [ 204.381519] ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000 [ 204.390196] 000000000000001e 0000000000000002 0000000000000002 0000000000000000 [ 204.398856] Call Trace: [ 204.401683] [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70 [ 204.408638] [<ffffffff8185a230>] notifier_call_chain+0x100/0x150 [ 204.415553] [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10 [ 204.422772] [<ffffffff81072163>] cpu_notify+0x23/0x50 [ 204.428616] [<ffffffff810723b2>] _cpu_up+0x132/0x1a0 [ 204.434361] [<ffffffff8107249d>] cpu_up+0x7d/0xa0 [ 204.439819] [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90 [ 204.446345] [<ffffffff81554625>] device_online+0x45/0xa0 [ 204.452471] [<ffffffff815546ce>] online_store+0x4e/0x80 [ 204.458511] [<ffffffff815519a8>] dev_attr_store+0x18/0x30 [ 204.464744] [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0 [ 204.471681] [<ffffffff81217ef1>] vfs_write+0xe1/0x160 [ 204.477524] [<ffffffff8121889c>] SyS_write+0x4c/0x90 [ 204.483270] [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f [ 204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79 [ 204.515723] RIP [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.522996] RSP <ffff880440fadd28> [ 204.526976] CR2: ffffffff8227cce8 [ 204.530766] ---[ end trace 336f56cc3d1cfc8c ]--- Fixes: 9d046ccb98085 (intel_idle: mark states tables with __initdata tag) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 07:30:26 +00:00
static struct cpuidle_state hsw_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C3",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 33,
.target_residency = 100,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 133,
.target_residency = 400,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7s",
.desc = "MWAIT 0x32",
.flags = MWAIT2flg(0x32) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 166,
.target_residency = 500,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C8",
.desc = "MWAIT 0x40",
.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 300,
.target_residency = 900,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C9",
.desc = "MWAIT 0x50",
.flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 600,
.target_residency = 1800,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C10",
.desc = "MWAIT 0x60",
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 2600,
.target_residency = 7700,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state bdw_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C3",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 40,
.target_residency = 100,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 133,
.target_residency = 400,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7s",
.desc = "MWAIT 0x32",
.flags = MWAIT2flg(0x32) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 166,
.target_residency = 500,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C8",
.desc = "MWAIT 0x40",
.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 300,
.target_residency = 900,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C9",
.desc = "MWAIT 0x50",
.flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 600,
.target_residency = 1800,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C10",
.desc = "MWAIT 0x60",
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 2600,
.target_residency = 7700,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state skl_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C3",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 70,
.target_residency = 100,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 85,
.target_residency = 200,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7s",
.desc = "MWAIT 0x33",
.flags = MWAIT2flg(0x33) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 124,
.target_residency = 800,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C8",
.desc = "MWAIT 0x40",
.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 200,
.target_residency = 800,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C9",
.desc = "MWAIT 0x50",
.flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 480,
.target_residency = 5000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C10",
.desc = "MWAIT 0x60",
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 890,
.target_residency = 5000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state skx_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 133,
.target_residency = 600,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
Revert "intel_idle: mark states tables with __initdata tag" This reverts commit 9d046ccb98085f1d437585f84748c783a04ba240. Commit 9d046ccb98085 marks all state tables with __initdata, but the state table may be accessed when doing CPU online, which then causing system crash as below: [ 204.188841] BUG: unable to handle kernel paging request at ffffffff8227cce8 [ 204.196844] IP: [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.203996] PGD 1e11067 PUD 1e12063 PMD 455859063 PTE 800000000227c062 [ 204.211638] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 204.216975] Modules linked in: x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd gpio_ich microcode joydev sb_edac edac_core ipmi_si lpc_ich ipmi_msghandler lp tpm_tis parport wmi mac_hid acpi_pad hid_generic ixgbe isci usbhid dca hid libsas ptp ahci libahci scsi_transport_sas megaraid_sas pps_core mdio [ 204.262815] CPU: 11 PID: 1489 Comm: bash Not tainted 3.13.0-rc7+ #48 [ 204.269993] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.L09.1312061514 12/06/2013 [ 204.281646] task: ffff8804303a24a0 ti: ffff880440fac000 task.ti: ffff880440fac000 [ 204.290311] RIP: 0010:[<ffffffff814aa1c0>] [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.300184] RSP: 0018:ffff880440fadd28 EFLAGS: 00010286 [ 204.306192] RAX: ffffffff8227cca0 RBX: ffffe8fff1a03400 RCX: 0000000000000007 [ 204.314244] RDX: ffff88045f400000 RSI: 0000000000000009 RDI: 0000000000001120 [ 204.322296] RBP: ffff880440fadd38 R08: 0000000000000000 R09: 0000000000000001 [ 204.330411] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000001e [ 204.338482] R13: 00000000ffffffdb R14: 0000000000000001 R15: 0000000000000000 [ 204.346743] FS: 00007f64f7b0c740(0000) GS:ffff88045ce00000(0000) knlGS:0000000000000000 [ 204.355919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 204.362449] CR2: ffffffff8227cce8 CR3: 0000000444ab0000 CR4: 00000000001407e0 [ 204.370520] Stack: [ 204.372853] 000000000000001e ffffffff81f10240 ffff880440fadd50 ffffffff814aa307 [ 204.381519] ffffffff81ea80e0 ffff880440fadda0 ffffffff8185a230 0000000000000000 [ 204.390196] 000000000000001e 0000000000000002 0000000000000002 0000000000000000 [ 204.398856] Call Trace: [ 204.401683] [<ffffffff814aa307>] cpu_hotplug_notify+0x57/0x70 [ 204.408638] [<ffffffff8185a230>] notifier_call_chain+0x100/0x150 [ 204.415553] [<ffffffff810a7dae>] __raw_notifier_call_chain+0xe/0x10 [ 204.422772] [<ffffffff81072163>] cpu_notify+0x23/0x50 [ 204.428616] [<ffffffff810723b2>] _cpu_up+0x132/0x1a0 [ 204.434361] [<ffffffff8107249d>] cpu_up+0x7d/0xa0 [ 204.439819] [<ffffffff81836c9c>] cpu_subsys_online+0x3c/0x90 [ 204.446345] [<ffffffff81554625>] device_online+0x45/0xa0 [ 204.452471] [<ffffffff815546ce>] online_store+0x4e/0x80 [ 204.458511] [<ffffffff815519a8>] dev_attr_store+0x18/0x30 [ 204.464744] [<ffffffff812a68f1>] sysfs_write_file+0x151/0x1c0 [ 204.471681] [<ffffffff81217ef1>] vfs_write+0xe1/0x160 [ 204.477524] [<ffffffff8121889c>] SyS_write+0x4c/0x90 [ 204.483270] [<ffffffff8185f2ed>] system_call_fastpath+0x1a/0x1f [ 204.490081] Code: 41 54 41 89 fc 8b 3d 48 25 85 01 53 48 8b 1d 30 25 85 01 48 03 1c c5 40 90 fb 81 48 8b 05 19 25 85 01 c7 43 0c 01 00 00 00 66 90 <48> 83 78 48 00 74 4f 41 83 c0 01 41 39 f0 7e 10 48 c7 c7 38 79 [ 204.515723] RIP [<ffffffff814aa1c0>] intel_idle_cpu_init+0x40/0x130 [ 204.522996] RSP <ffff880440fadd28> [ 204.526976] CR2: ffffffff8227cce8 [ 204.530766] ---[ end trace 336f56cc3d1cfc8c ]--- Fixes: 9d046ccb98085 (intel_idle: mark states tables with __initdata tag) Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-09 07:30:26 +00:00
static struct cpuidle_state atom_cstates[] = {
{
.name = "C1E",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C2",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10),
.exit_latency = 20,
.target_residency = 80,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C4",
.desc = "MWAIT 0x30",
.flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 100,
.target_residency = 400,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x52",
.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 140,
.target_residency = 560,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state tangier_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 4,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C4",
.desc = "MWAIT 0x30",
.flags = MWAIT2flg(0x30) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 100,
.target_residency = 400,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x52",
.flags = MWAIT2flg(0x52) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 140,
.target_residency = 560,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7",
.desc = "MWAIT 0x60",
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 1200,
.target_residency = 4000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C9",
.desc = "MWAIT 0x64",
.flags = MWAIT2flg(0x64) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 10000,
.target_residency = 20000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state avn_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x51",
.flags = MWAIT2flg(0x51) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 15,
.target_residency = 45,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state knl_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 1,
.target_residency = 2,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle },
{
.name = "C6",
.desc = "MWAIT 0x10",
.flags = MWAIT2flg(0x10) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 120,
.target_residency = 500,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle },
{
.enter = NULL }
};
static struct cpuidle_state bxt_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 133,
.target_residency = 133,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C7s",
.desc = "MWAIT 0x31",
.flags = MWAIT2flg(0x31) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 155,
.target_residency = 155,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C8",
.desc = "MWAIT 0x40",
.flags = MWAIT2flg(0x40) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 1000,
.target_residency = 1000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C9",
.desc = "MWAIT 0x50",
.flags = MWAIT2flg(0x50) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 2000,
.target_residency = 2000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C10",
.desc = "MWAIT 0x60",
.flags = MWAIT2flg(0x60) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 10000,
.target_residency = 10000,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
static struct cpuidle_state dnv_cstates[] = {
{
.name = "C1",
.desc = "MWAIT 0x00",
.flags = MWAIT2flg(0x00),
.exit_latency = 2,
.target_residency = 2,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C1E",
.desc = "MWAIT 0x01",
.flags = MWAIT2flg(0x01),
.exit_latency = 10,
.target_residency = 20,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.name = "C6",
.desc = "MWAIT 0x20",
.flags = MWAIT2flg(0x20) | CPUIDLE_FLAG_TLB_FLUSHED,
.exit_latency = 50,
.target_residency = 500,
.enter = &intel_idle,
.enter_s2idle = intel_idle_s2idle, },
{
.enter = NULL }
};
/**
* intel_idle
* @dev: cpuidle_device
* @drv: cpuidle driver
* @index: index of cpuidle state
*
* Must be called under local_irq_disable().
*/
static __cpuidle int intel_idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
unsigned long ecx = 1; /* break on interrupt flag */
struct cpuidle_state *state = &drv->states[index];
unsigned long eax = flg2MWAIT(state->flags);
unsigned int cstate;
bool uninitialized_var(tick);
Revert "x86/mm: Stop calling leave_mm() in idle code" This reverts commit 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5. The reason I removed the leave_mm() calls in question is because the heuristic wasn't needed after that patch. With the original version of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running kernel thread) due a flush on the loaded mm. Unfortunately, that caused architectural issues, so now I've reinstated these flushes on non-PCID systems in: commit b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode"). That, in turn, gives us a power management and occasionally performance regression as compared to old kernels: a process that goes into a deep idle state on a given CPU and gets its mm flushed due to activity on a different CPU will wake the idle CPU. Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an intel_idle state that is likely to cause a TLB flush gets its mm switched to init_mm before going idle. FWIW, this heuristic is lousy. Whether we should change CR3 before idle isn't a good hint except insofar as the performance hit is a bit lower if the TLB is getting flushed by the idle code anyway. What we really want to know is whether we anticipate being idle long enough that the mm is likely to be flushed before we wake up. This is more a matter of the expected latency than the idle state that gets chosen. This heuristic also completely fails on systems that don't know whether the TLB will be flushed (e.g. AMD systems?). OTOH it may be a bit obsolete anyway -- PCID systems don't presently benefit from this heuristic at all. We also shouldn't do this callback from innermost bit of the idle code due to the RCU nastiness it causes. All the information need is available before rcu_idle_enter() needs to happen. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43858b4f25cf "x86/mm: Stop calling leave_mm() in idle code" Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04 11:16:12 +00:00
int cpu = smp_processor_id();
/*
Revert "x86/mm: Stop calling leave_mm() in idle code" This reverts commit 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5. The reason I removed the leave_mm() calls in question is because the heuristic wasn't needed after that patch. With the original version of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running kernel thread) due a flush on the loaded mm. Unfortunately, that caused architectural issues, so now I've reinstated these flushes on non-PCID systems in: commit b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode"). That, in turn, gives us a power management and occasionally performance regression as compared to old kernels: a process that goes into a deep idle state on a given CPU and gets its mm flushed due to activity on a different CPU will wake the idle CPU. Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an intel_idle state that is likely to cause a TLB flush gets its mm switched to init_mm before going idle. FWIW, this heuristic is lousy. Whether we should change CR3 before idle isn't a good hint except insofar as the performance hit is a bit lower if the TLB is getting flushed by the idle code anyway. What we really want to know is whether we anticipate being idle long enough that the mm is likely to be flushed before we wake up. This is more a matter of the expected latency than the idle state that gets chosen. This heuristic also completely fails on systems that don't know whether the TLB will be flushed (e.g. AMD systems?). OTOH it may be a bit obsolete anyway -- PCID systems don't presently benefit from this heuristic at all. We also shouldn't do this callback from innermost bit of the idle code due to the RCU nastiness it causes. All the information need is available before rcu_idle_enter() needs to happen. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43858b4f25cf "x86/mm: Stop calling leave_mm() in idle code" Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04 11:16:12 +00:00
* leave_mm() to avoid costly and often unnecessary wakeups
* for flushing the user TLB's associated with the active mm.
*/
Revert "x86/mm: Stop calling leave_mm() in idle code" This reverts commit 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5. The reason I removed the leave_mm() calls in question is because the heuristic wasn't needed after that patch. With the original version of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running kernel thread) due a flush on the loaded mm. Unfortunately, that caused architectural issues, so now I've reinstated these flushes on non-PCID systems in: commit b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode"). That, in turn, gives us a power management and occasionally performance regression as compared to old kernels: a process that goes into a deep idle state on a given CPU and gets its mm flushed due to activity on a different CPU will wake the idle CPU. Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an intel_idle state that is likely to cause a TLB flush gets its mm switched to init_mm before going idle. FWIW, this heuristic is lousy. Whether we should change CR3 before idle isn't a good hint except insofar as the performance hit is a bit lower if the TLB is getting flushed by the idle code anyway. What we really want to know is whether we anticipate being idle long enough that the mm is likely to be flushed before we wake up. This is more a matter of the expected latency than the idle state that gets chosen. This heuristic also completely fails on systems that don't know whether the TLB will be flushed (e.g. AMD systems?). OTOH it may be a bit obsolete anyway -- PCID systems don't presently benefit from this heuristic at all. We also shouldn't do this callback from innermost bit of the idle code due to the RCU nastiness it causes. All the information need is available before rcu_idle_enter() needs to happen. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43858b4f25cf "x86/mm: Stop calling leave_mm() in idle code" Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-04 11:16:12 +00:00
if (state->flags & CPUIDLE_FLAG_TLB_FLUSHED)
leave_mm(cpu);
if (!static_cpu_has(X86_FEATURE_ARAT)) {
cstate = (((eax) >> MWAIT_SUBSTATE_SIZE) &
MWAIT_CSTATE_MASK) + 1;
tick = false;
if (!(lapic_timer_reliable_states & (1 << (cstate)))) {
tick = true;
tick_broadcast_enter();
}
}
mwait_idle_with_hints(eax, ecx);
if (!static_cpu_has(X86_FEATURE_ARAT) && tick)
tick_broadcast_exit();
return index;
}
/**
* intel_idle_s2idle - simplified "enter" callback routine for suspend-to-idle
* @dev: cpuidle_device
* @drv: cpuidle driver
* @index: state index
*/
static void intel_idle_s2idle(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index)
{
unsigned long ecx = 1; /* break on interrupt flag */
unsigned long eax = flg2MWAIT(drv->states[index].flags);
mwait_idle_with_hints(eax, ecx);
}
static void __setup_broadcast_timer(bool on)
{
if (on)
tick_broadcast_enable();
else
tick_broadcast_disable();
}
static void auto_demotion_disable(void)
{
unsigned long long msr_bits;
rdmsrl(MSR_PKG_CST_CONFIG_CONTROL, msr_bits);
msr_bits &= ~(icpu->auto_demotion_disable_flags);
wrmsrl(MSR_PKG_CST_CONFIG_CONTROL, msr_bits);
}
static void c1e_promotion_disable(void)
{
unsigned long long msr_bits;
rdmsrl(MSR_IA32_POWER_CTL, msr_bits);
msr_bits &= ~0x2;
wrmsrl(MSR_IA32_POWER_CTL, msr_bits);
}
static const struct idle_cpu idle_cpu_nehalem = {
.state_table = nehalem_cstates,
.auto_demotion_disable_flags = NHM_C1_AUTO_DEMOTE | NHM_C3_AUTO_DEMOTE,
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_atom = {
.state_table = atom_cstates,
};
static const struct idle_cpu idle_cpu_tangier = {
.state_table = tangier_cstates,
};
static const struct idle_cpu idle_cpu_lincroft = {
.state_table = atom_cstates,
.auto_demotion_disable_flags = ATM_LNC_C6_AUTO_DEMOTE,
};
static const struct idle_cpu idle_cpu_snb = {
.state_table = snb_cstates,
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_byt = {
.state_table = byt_cstates,
.disable_promotion_to_c1e = true,
.byt_auto_demotion_disable_flag = true,
};
static const struct idle_cpu idle_cpu_cht = {
.state_table = cht_cstates,
.disable_promotion_to_c1e = true,
.byt_auto_demotion_disable_flag = true,
};
static const struct idle_cpu idle_cpu_ivb = {
.state_table = ivb_cstates,
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_ivt = {
.state_table = ivt_cstates,
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_hsw = {
.state_table = hsw_cstates,
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_bdw = {
.state_table = bdw_cstates,
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_skl = {
.state_table = skl_cstates,
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_skx = {
.state_table = skx_cstates,
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_avn = {
.state_table = avn_cstates,
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_knl = {
.state_table = knl_cstates,
};
static const struct idle_cpu idle_cpu_bxt = {
.state_table = bxt_cstates,
.disable_promotion_to_c1e = true,
};
static const struct idle_cpu idle_cpu_dnv = {
.state_table = dnv_cstates,
.disable_promotion_to_c1e = true,
};
static const struct x86_cpu_id intel_idle_ids[] __initconst = {
INTEL_CPU_FAM6(NEHALEM_EP, idle_cpu_nehalem),
INTEL_CPU_FAM6(NEHALEM, idle_cpu_nehalem),
INTEL_CPU_FAM6(NEHALEM_G, idle_cpu_nehalem),
INTEL_CPU_FAM6(WESTMERE, idle_cpu_nehalem),
INTEL_CPU_FAM6(WESTMERE_EP, idle_cpu_nehalem),
INTEL_CPU_FAM6(NEHALEM_EX, idle_cpu_nehalem),
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main updates in this cycle were: - Lots of perf tooling changes too voluminous to list (big perf trace and perf stat improvements, lots of libtraceevent reorganization, etc.), so I'll list the authors and refer to the changelog for details: Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa. ... with the bulk of the changes written by Jiri Olsa, Tzvetomir Stoyanov and Arnaldo Carvalho de Melo. - Continued intel_rdt work with a focus on playing well with perf events. This also imported some non-perf RDT work due to dependencies. (Reinette Chatre) - Implement counter freezing for Arch Perfmon v4 (Skylake and newer). This allows to speed up the PMI handler by avoiding unnecessary MSR writes and make it more accurate. (Andi Kleen) - kprobes cleanups and simplification (Masami Hiramatsu) - Intel Goldmont PMU updates (Kan Liang) - ... plus misc other fixes and updates" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits) kprobes/x86: Use preempt_enable() in optimized_callback() x86/intel_rdt: Prevent pseudo-locking from using stale pointers kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack perf/x86/intel: Export mem events only if there's PEBS support x86/cpu: Drop pointless static qualifier in punit_dev_state_show() x86/intel_rdt: Fix initial allocation to consider CDP x86/intel_rdt: CBM overlap should also check for overlap with CDP peer x86/intel_rdt: Introduce utility to obtain CDP peer tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file tools lib traceevent: Separate out tep_strerror() for strerror_r() issues perf python: More portable way to make CFLAGS work with clang perf python: Make clang_has_option() work on Python 3 perf tools: Free temporary 'sys' string in read_event_files() perf tools: Avoid double free in read_event_file() perf tools: Free 'printk' string in parse_ftrace_printk() perf tools: Cleanup trace-event-info 'tdata' leak perf strbuf: Match va_{add,copy} with va_end perf test: S390 does not support watchpoints in test 22 perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG tools include: Adopt linux/bits.h ...
2018-10-23 12:32:18 +00:00
INTEL_CPU_FAM6(ATOM_BONNELL, idle_cpu_atom),
INTEL_CPU_FAM6(ATOM_BONNELL_MID, idle_cpu_lincroft),
INTEL_CPU_FAM6(WESTMERE_EX, idle_cpu_nehalem),
INTEL_CPU_FAM6(SANDYBRIDGE, idle_cpu_snb),
INTEL_CPU_FAM6(SANDYBRIDGE_X, idle_cpu_snb),
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main updates in this cycle were: - Lots of perf tooling changes too voluminous to list (big perf trace and perf stat improvements, lots of libtraceevent reorganization, etc.), so I'll list the authors and refer to the changelog for details: Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa. ... with the bulk of the changes written by Jiri Olsa, Tzvetomir Stoyanov and Arnaldo Carvalho de Melo. - Continued intel_rdt work with a focus on playing well with perf events. This also imported some non-perf RDT work due to dependencies. (Reinette Chatre) - Implement counter freezing for Arch Perfmon v4 (Skylake and newer). This allows to speed up the PMI handler by avoiding unnecessary MSR writes and make it more accurate. (Andi Kleen) - kprobes cleanups and simplification (Masami Hiramatsu) - Intel Goldmont PMU updates (Kan Liang) - ... plus misc other fixes and updates" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits) kprobes/x86: Use preempt_enable() in optimized_callback() x86/intel_rdt: Prevent pseudo-locking from using stale pointers kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack perf/x86/intel: Export mem events only if there's PEBS support x86/cpu: Drop pointless static qualifier in punit_dev_state_show() x86/intel_rdt: Fix initial allocation to consider CDP x86/intel_rdt: CBM overlap should also check for overlap with CDP peer x86/intel_rdt: Introduce utility to obtain CDP peer tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file tools lib traceevent: Separate out tep_strerror() for strerror_r() issues perf python: More portable way to make CFLAGS work with clang perf python: Make clang_has_option() work on Python 3 perf tools: Free temporary 'sys' string in read_event_files() perf tools: Avoid double free in read_event_file() perf tools: Free 'printk' string in parse_ftrace_printk() perf tools: Cleanup trace-event-info 'tdata' leak perf strbuf: Match va_{add,copy} with va_end perf test: S390 does not support watchpoints in test 22 perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG tools include: Adopt linux/bits.h ...
2018-10-23 12:32:18 +00:00
INTEL_CPU_FAM6(ATOM_SALTWELL, idle_cpu_atom),
INTEL_CPU_FAM6(ATOM_SILVERMONT, idle_cpu_byt),
INTEL_CPU_FAM6(ATOM_SILVERMONT_MID, idle_cpu_tangier),
INTEL_CPU_FAM6(ATOM_AIRMONT, idle_cpu_cht),
INTEL_CPU_FAM6(IVYBRIDGE, idle_cpu_ivb),
INTEL_CPU_FAM6(IVYBRIDGE_X, idle_cpu_ivt),
INTEL_CPU_FAM6(HASWELL, idle_cpu_hsw),
INTEL_CPU_FAM6(HASWELL_X, idle_cpu_hsw),
INTEL_CPU_FAM6(HASWELL_L, idle_cpu_hsw),
INTEL_CPU_FAM6(HASWELL_G, idle_cpu_hsw),
INTEL_CPU_FAM6(ATOM_SILVERMONT_D, idle_cpu_avn),
INTEL_CPU_FAM6(BROADWELL, idle_cpu_bdw),
INTEL_CPU_FAM6(BROADWELL_G, idle_cpu_bdw),
INTEL_CPU_FAM6(BROADWELL_X, idle_cpu_bdw),
INTEL_CPU_FAM6(BROADWELL_D, idle_cpu_bdw),
INTEL_CPU_FAM6(SKYLAKE_L, idle_cpu_skl),
INTEL_CPU_FAM6(SKYLAKE, idle_cpu_skl),
INTEL_CPU_FAM6(KABYLAKE_L, idle_cpu_skl),
INTEL_CPU_FAM6(KABYLAKE, idle_cpu_skl),
INTEL_CPU_FAM6(SKYLAKE_X, idle_cpu_skx),
INTEL_CPU_FAM6(XEON_PHI_KNL, idle_cpu_knl),
INTEL_CPU_FAM6(XEON_PHI_KNM, idle_cpu_knl),
INTEL_CPU_FAM6(ATOM_GOLDMONT, idle_cpu_bxt),
Merge branch 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates from Ingo Molnar: "The main updates in this cycle were: - Lots of perf tooling changes too voluminous to list (big perf trace and perf stat improvements, lots of libtraceevent reorganization, etc.), so I'll list the authors and refer to the changelog for details: Benjamin Peterson, Jérémie Galarneau, Kim Phillips, Peter Zijlstra, Ravi Bangoria, Sangwon Hong, Sean V Kelley, Steven Rostedt, Thomas Gleixner, Ding Xiang, Eduardo Habkost, Thomas Richter, Andi Kleen, Sanskriti Sharma, Adrian Hunter, Tzvetomir Stoyanov, Arnaldo Carvalho de Melo, Jiri Olsa. ... with the bulk of the changes written by Jiri Olsa, Tzvetomir Stoyanov and Arnaldo Carvalho de Melo. - Continued intel_rdt work with a focus on playing well with perf events. This also imported some non-perf RDT work due to dependencies. (Reinette Chatre) - Implement counter freezing for Arch Perfmon v4 (Skylake and newer). This allows to speed up the PMI handler by avoiding unnecessary MSR writes and make it more accurate. (Andi Kleen) - kprobes cleanups and simplification (Masami Hiramatsu) - Intel Goldmont PMU updates (Kan Liang) - ... plus misc other fixes and updates" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (155 commits) kprobes/x86: Use preempt_enable() in optimized_callback() x86/intel_rdt: Prevent pseudo-locking from using stale pointers kprobes, x86/ptrace.h: Make regs_get_kernel_stack_nth() not fault on bad stack perf/x86/intel: Export mem events only if there's PEBS support x86/cpu: Drop pointless static qualifier in punit_dev_state_show() x86/intel_rdt: Fix initial allocation to consider CDP x86/intel_rdt: CBM overlap should also check for overlap with CDP peer x86/intel_rdt: Introduce utility to obtain CDP peer tools lib traceevent, perf tools: Move struct tep_handler definition in a local header file tools lib traceevent: Separate out tep_strerror() for strerror_r() issues perf python: More portable way to make CFLAGS work with clang perf python: Make clang_has_option() work on Python 3 perf tools: Free temporary 'sys' string in read_event_files() perf tools: Avoid double free in read_event_file() perf tools: Free 'printk' string in parse_ftrace_printk() perf tools: Cleanup trace-event-info 'tdata' leak perf strbuf: Match va_{add,copy} with va_end perf test: S390 does not support watchpoints in test 22 perf auxtrace: Include missing asm/bitsperlong.h to get BITS_PER_LONG tools include: Adopt linux/bits.h ...
2018-10-23 12:32:18 +00:00
INTEL_CPU_FAM6(ATOM_GOLDMONT_PLUS, idle_cpu_bxt),
INTEL_CPU_FAM6(ATOM_GOLDMONT_D, idle_cpu_dnv),
INTEL_CPU_FAM6(ATOM_TREMONT_D, idle_cpu_dnv),
{}
};
/*
* intel_idle_probe()
*/
static int __init intel_idle_probe(void)
{
unsigned int eax, ebx, ecx;
const struct x86_cpu_id *id;
if (max_cstate == 0) {
pr_debug("disabled\n");
return -EPERM;
}
id = x86_match_cpu(intel_idle_ids);
if (!id) {
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
boot_cpu_data.x86 == 6)
pr_debug("does not run on family %d model %d\n",
boot_cpu_data.x86, boot_cpu_data.x86_model);
return -ENODEV;
}
if (!boot_cpu_has(X86_FEATURE_MWAIT)) {
pr_debug("Please enable MWAIT in BIOS SETUP\n");
return -ENODEV;
}
if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
return -ENODEV;
cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &mwait_substates);
if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
!(ecx & CPUID5_ECX_INTERRUPT_BREAK) ||
!mwait_substates)
return -ENODEV;
pr_debug("MWAIT substates: 0x%x\n", mwait_substates);
icpu = (const struct idle_cpu *)id->driver_data;
cpuidle_state_table = icpu->state_table;
pr_debug("v" INTEL_IDLE_VERSION " model 0x%X\n",
boot_cpu_data.x86_model);
return 0;
}
/*
* intel_idle_cpuidle_devices_uninit()
* Unregisters the cpuidle devices.
*/
static void intel_idle_cpuidle_devices_uninit(void)
{
int i;
struct cpuidle_device *dev;
for_each_online_cpu(i) {
dev = per_cpu_ptr(intel_idle_cpuidle_devices, i);
cpuidle_unregister_device(dev);
}
}
/*
* ivt_idle_state_table_update(void)
*
* Tune IVT multi-socket targets
* Assumption: num_sockets == (max_package_num + 1)
*/
static void ivt_idle_state_table_update(void)
{
/* IVT uses a different table for 1-2, 3-4, and > 4 sockets */
int cpu, package_num, num_sockets = 1;
for_each_online_cpu(cpu) {
package_num = topology_physical_package_id(cpu);
if (package_num + 1 > num_sockets) {
num_sockets = package_num + 1;
if (num_sockets > 4) {
cpuidle_state_table = ivt_cstates_8s;
return;
}
}
}
if (num_sockets > 2)
cpuidle_state_table = ivt_cstates_4s;
/* else, 1 and 2 socket systems use default ivt_cstates */
}
/*
* Translate IRTL (Interrupt Response Time Limit) MSR to usec
*/
static unsigned int irtl_ns_units[] = {
1, 32, 1024, 32768, 1048576, 33554432, 0, 0 };
static unsigned long long irtl_2_usec(unsigned long long irtl)
{
unsigned long long ns;
if (!irtl)
return 0;
ns = irtl_ns_units[(irtl >> 10) & 0x7];
return div64_u64((irtl & 0x3FF) * ns, 1000);
}
/*
* bxt_idle_state_table_update(void)
*
* On BXT, we trust the IRTL to show the definitive maximum latency
* We use the same value for target_residency.
*/
static void bxt_idle_state_table_update(void)
{
unsigned long long msr;
unsigned int usec;
rdmsrl(MSR_PKGC6_IRTL, msr);
usec = irtl_2_usec(msr);
if (usec) {
bxt_cstates[2].exit_latency = usec;
bxt_cstates[2].target_residency = usec;
}
rdmsrl(MSR_PKGC7_IRTL, msr);
usec = irtl_2_usec(msr);
if (usec) {
bxt_cstates[3].exit_latency = usec;
bxt_cstates[3].target_residency = usec;
}
rdmsrl(MSR_PKGC8_IRTL, msr);
usec = irtl_2_usec(msr);
if (usec) {
bxt_cstates[4].exit_latency = usec;
bxt_cstates[4].target_residency = usec;
}
rdmsrl(MSR_PKGC9_IRTL, msr);
usec = irtl_2_usec(msr);
if (usec) {
bxt_cstates[5].exit_latency = usec;
bxt_cstates[5].target_residency = usec;
}
rdmsrl(MSR_PKGC10_IRTL, msr);
usec = irtl_2_usec(msr);
if (usec) {
bxt_cstates[6].exit_latency = usec;
bxt_cstates[6].target_residency = usec;
}
}
/*
* sklh_idle_state_table_update(void)
*
* On SKL-H (model 0x5e) disable C8 and C9 if:
* C10 is enabled and SGX disabled
*/
static void sklh_idle_state_table_update(void)
{
unsigned long long msr;
unsigned int eax, ebx, ecx, edx;
/* if PC10 disabled via cmdline intel_idle.max_cstate=7 or shallower */
if (max_cstate <= 7)
return;
/* if PC10 not present in CPUID.MWAIT.EDX */
if ((mwait_substates & (0xF << 28)) == 0)
return;
rdmsrl(MSR_PKG_CST_CONFIG_CONTROL, msr);
/* PC10 is not enabled in PKG C-state limit */
if ((msr & 0xF) != 8)
return;
ecx = 0;
cpuid(7, &eax, &ebx, &ecx, &edx);
/* if SGX is present */
if (ebx & (1 << 2)) {
rdmsrl(MSR_IA32_FEATURE_CONTROL, msr);
/* if SGX is enabled */
if (msr & (1 << 18))
return;
}
skl_cstates[5].flags |= CPUIDLE_FLAG_UNUSABLE; /* C8-SKL */
skl_cstates[6].flags |= CPUIDLE_FLAG_UNUSABLE; /* C9-SKL */
}
/*
* intel_idle_state_table_update()
*
* Update the default state_table for this CPU-id
*/
static void intel_idle_state_table_update(void)
{
switch (boot_cpu_data.x86_model) {
case INTEL_FAM6_IVYBRIDGE_X:
ivt_idle_state_table_update();
break;
case INTEL_FAM6_ATOM_GOLDMONT:
case INTEL_FAM6_ATOM_GOLDMONT_PLUS:
bxt_idle_state_table_update();
break;
case INTEL_FAM6_SKYLAKE:
sklh_idle_state_table_update();
break;
}
}
/*
* intel_idle_cpuidle_driver_init()
* allocate, initialize cpuidle_states
*/
static void __init intel_idle_cpuidle_driver_init(void)
{
int cstate;
struct cpuidle_driver *drv = &intel_idle_driver;
intel_idle_state_table_update();
cpuidle_poll_state_init(drv);
drv->state_count = 1;
for (cstate = 0; cstate < CPUIDLE_STATE_MAX; ++cstate) {
int num_substates, mwait_hint, mwait_cstate;
if ((cpuidle_state_table[cstate].enter == NULL) &&
(cpuidle_state_table[cstate].enter_s2idle == NULL))
break;
if (cstate + 1 > max_cstate) {
pr_info("max_cstate %d reached\n", max_cstate);
break;
}
mwait_hint = flg2MWAIT(cpuidle_state_table[cstate].flags);
mwait_cstate = MWAIT_HINT2CSTATE(mwait_hint);
/* number of sub-states for this state in CPUID.MWAIT */
num_substates = (mwait_substates >> ((mwait_cstate + 1) * 4))
& MWAIT_SUBSTATE_MASK;
/* if NO sub-states for this state in CPUID, skip it */
if (num_substates == 0)
continue;
/* if state marked as disabled, skip it */
if (cpuidle_state_table[cstate].flags & CPUIDLE_FLAG_UNUSABLE) {
pr_debug("state %s is disabled\n",
cpuidle_state_table[cstate].name);
continue;
}
if (((mwait_cstate + 1) > 2) &&
!boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
mark_tsc_unstable("TSC halts in idle"
" states deeper than C2");
drv->states[drv->state_count] = /* structure copy */
cpuidle_state_table[cstate];
drv->state_count += 1;
}
if (icpu->byt_auto_demotion_disable_flag) {
wrmsrl(MSR_CC6_DEMOTION_POLICY_CONFIG, 0);
wrmsrl(MSR_MC6_DEMOTION_POLICY_CONFIG, 0);
}
}
/*
* intel_idle_cpu_init()
* allocate, initialize, register cpuidle_devices
* @cpu: cpu/core to initialize
*/
static int intel_idle_cpu_init(unsigned int cpu)
{
struct cpuidle_device *dev;
dev = per_cpu_ptr(intel_idle_cpuidle_devices, cpu);
dev->cpu = cpu;
if (cpuidle_register_device(dev)) {
pr_debug("cpuidle_register_device %d failed!\n", cpu);
return -EIO;
}
if (icpu->auto_demotion_disable_flags)
auto_demotion_disable();
if (icpu->disable_promotion_to_c1e)
c1e_promotion_disable();
return 0;
}
static int intel_idle_cpu_online(unsigned int cpu)
{
struct cpuidle_device *dev;
if (lapic_timer_reliable_states != LAPIC_TIMER_ALWAYS_RELIABLE)
__setup_broadcast_timer(true);
/*
* Some systems can hotplug a cpu at runtime after
* the kernel has booted, we have to initialize the
* driver in this case
*/
dev = per_cpu_ptr(intel_idle_cpuidle_devices, cpu);
if (!dev->registered)
return intel_idle_cpu_init(cpu);
return 0;
}
static int __init intel_idle_init(void)
{
int retval;
/* Do not load intel_idle at all for now if idle= is passed */
if (boot_option_idle_override != IDLE_NO_OVERRIDE)
return -ENODEV;
retval = intel_idle_probe();
if (retval)
return retval;
intel_idle_cpuidle_devices = alloc_percpu(struct cpuidle_device);
if (intel_idle_cpuidle_devices == NULL)
return -ENOMEM;
intel_idle_cpuidle_driver_init();
retval = cpuidle_register_driver(&intel_idle_driver);
if (retval) {
struct cpuidle_driver *drv = cpuidle_get_driver();
printk(KERN_DEBUG pr_fmt("intel_idle yielding to %s\n"),
drv ? drv->name : "none");
goto init_driver_fail;
}
if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
lapic_timer_reliable_states = LAPIC_TIMER_ALWAYS_RELIABLE;
retval = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "idle/intel:online",
intel_idle_cpu_online, NULL);
if (retval < 0)
goto hp_setup_fail;
pr_debug("lapic_timer_reliable_states 0x%x\n",
lapic_timer_reliable_states);
return 0;
hp_setup_fail:
intel_idle_cpuidle_devices_uninit();
cpuidle_unregister_driver(&intel_idle_driver);
init_driver_fail:
free_percpu(intel_idle_cpuidle_devices);
return retval;
}
drivers/idle: make intel_idle.c driver more explicitly non-modular The Kconfig for this driver is currently declared with: config INTEL_IDLE bool "Cpuidle Driver for Intel Processors" ...meaning that it currently is not being built as a module by anyone. This was done in commit 6ce9cd8669fa1195fdc21643370e34523c7ac988 ("intel_idle: disable module support") since "...the module capability is cauing more trouble than it is worth." This was done over 5y ago, and Daniel adds that: ...the modular support has been removed from almost all the cpuidle drivers and the cpuidle framework is no longer assuming driver could be unloaded. Removing the modular dead code in the driver makes sense as this what have been done in the others drivers. So lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. At a later date we might want to consider whether subsys_init or another init category seems more appropriate than device_init. We replace module.h with moduleparam.h since the file does declare some module parameters, and leaving them as such is currently the easiest way to remain compatible with existing boot arg use cases. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Also note that we can't remove intel_idle_cpuidle_devices_uninit() as that is still used for unwind purposes if the init fails. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-17 05:28:33 +00:00
device_initcall(intel_idle_init);
drivers/idle: make intel_idle.c driver more explicitly non-modular The Kconfig for this driver is currently declared with: config INTEL_IDLE bool "Cpuidle Driver for Intel Processors" ...meaning that it currently is not being built as a module by anyone. This was done in commit 6ce9cd8669fa1195fdc21643370e34523c7ac988 ("intel_idle: disable module support") since "...the module capability is cauing more trouble than it is worth." This was done over 5y ago, and Daniel adds that: ...the modular support has been removed from almost all the cpuidle drivers and the cpuidle framework is no longer assuming driver could be unloaded. Removing the modular dead code in the driver makes sense as this what have been done in the others drivers. So lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. At a later date we might want to consider whether subsys_init or another init category seems more appropriate than device_init. We replace module.h with moduleparam.h since the file does declare some module parameters, and leaving them as such is currently the easiest way to remain compatible with existing boot arg use cases. Note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Also note that we can't remove intel_idle_cpuidle_devices_uninit() as that is still used for unwind purposes if the init fails. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-17 05:28:33 +00:00
/*
* We are not really modular, but we used to support that. Meaning we also
* support "intel_idle.max_cstate=..." at boot and also a read-only export of
* it at /sys/module/intel_idle/parameters/max_cstate -- so using module_param
* is the easiest way (currently) to continue doing that.
*/
module_param(max_cstate, int, 0444);