2007-05-09 05:51:49 +00:00
|
|
|
/*arch/powerpc/platforms/8xx/mpc86xads_setup.c
|
2007-01-24 19:42:10 +00:00
|
|
|
*
|
|
|
|
* Platform setup for the Freescale mpc86xads board
|
|
|
|
*
|
|
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
|
|
*
|
|
|
|
* Copyright 2005 MontaVista Software Inc.
|
|
|
|
*
|
|
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
|
|
* kind, whether express or implied.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/param.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/root_dev.h>
|
|
|
|
|
|
|
|
#include <linux/fs_enet_pd.h>
|
|
|
|
#include <linux/fs_uart_pd.h>
|
|
|
|
#include <linux/mii.h>
|
|
|
|
|
|
|
|
#include <asm/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/machdep.h>
|
|
|
|
#include <asm/page.h>
|
|
|
|
#include <asm/processor.h>
|
|
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/time.h>
|
|
|
|
#include <asm/mpc8xx.h>
|
|
|
|
#include <asm/8xx_immap.h>
|
|
|
|
#include <asm/commproc.h>
|
|
|
|
#include <asm/fs_pd.h>
|
|
|
|
#include <asm/prom.h>
|
|
|
|
|
|
|
|
extern void cpm_reset(void);
|
|
|
|
extern void mpc8xx_show_cpuinfo(struct seq_file*);
|
|
|
|
extern void mpc8xx_restart(char *cmd);
|
|
|
|
extern void mpc8xx_calibrate_decr(void);
|
|
|
|
extern int mpc8xx_set_rtc_time(struct rtc_time *tm);
|
|
|
|
extern void mpc8xx_get_rtc_time(struct rtc_time *tm);
|
|
|
|
extern void m8xx_pic_init(void);
|
|
|
|
extern unsigned int mpc8xx_get_irq(void);
|
|
|
|
|
|
|
|
static void init_smc1_uart_ioports(struct fs_uart_platform_info* fpi);
|
|
|
|
static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi);
|
|
|
|
static void init_scc1_ioports(struct fs_platform_info* ptr);
|
|
|
|
|
|
|
|
void __init mpc86xads_board_setup(void)
|
|
|
|
{
|
|
|
|
cpm8xx_t *cp;
|
|
|
|
unsigned int *bcsr_io;
|
|
|
|
u8 tmpval8;
|
|
|
|
|
|
|
|
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
|
|
|
cp = (cpm8xx_t *)immr_map(im_cpm);
|
|
|
|
|
|
|
|
if (bcsr_io == NULL) {
|
|
|
|
printk(KERN_CRIT "Could not remap BCSR\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SMC1
|
|
|
|
clrbits32(bcsr_io, BCSR1_RS232EN_1);
|
|
|
|
clrbits32(&cp->cp_simode, 0xe0000000 >> 17); /* brg1 */
|
|
|
|
tmpval8 = in_8(&(cp->cp_smc[0].smc_smcm)) | (SMCM_RX | SMCM_TX);
|
|
|
|
out_8(&(cp->cp_smc[0].smc_smcm), tmpval8);
|
|
|
|
clrbits16(&cp->cp_smc[0].smc_smcmr, SMCMR_REN | SMCMR_TEN);
|
|
|
|
#else
|
|
|
|
setbits32(bcsr_io,BCSR1_RS232EN_1);
|
|
|
|
out_be16(&cp->cp_smc[0].smc_smcmr, 0);
|
|
|
|
out_8(&cp->cp_smc[0].smc_smce, 0);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef CONFIG_SERIAL_CPM_SMC2
|
|
|
|
clrbits32(bcsr_io,BCSR1_RS232EN_2);
|
|
|
|
clrbits32(&cp->cp_simode, 0xe0000000 >> 1);
|
|
|
|
setbits32(&cp->cp_simode, 0x20000000 >> 1); /* brg2 */
|
|
|
|
tmpval8 = in_8(&(cp->cp_smc[1].smc_smcm)) | (SMCM_RX | SMCM_TX);
|
|
|
|
out_8(&(cp->cp_smc[1].smc_smcm), tmpval8);
|
|
|
|
clrbits16(&cp->cp_smc[1].smc_smcmr, SMCMR_REN | SMCMR_TEN);
|
|
|
|
|
|
|
|
init_smc2_uart_ioports(0);
|
|
|
|
#else
|
|
|
|
setbits32(bcsr_io,BCSR1_RS232EN_2);
|
|
|
|
out_be16(&cp->cp_smc[1].smc_smcmr, 0);
|
|
|
|
out_8(&cp->cp_smc[1].smc_smce, 0);
|
|
|
|
#endif
|
|
|
|
immr_unmap(cp);
|
|
|
|
iounmap(bcsr_io);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void init_fec1_ioports(struct fs_platform_info* ptr)
|
|
|
|
{
|
|
|
|
iop8xx_t *io_port = (iop8xx_t *)immr_map(im_ioport);
|
|
|
|
|
|
|
|
/* configure FEC1 pins */
|
|
|
|
|
|
|
|
setbits16(&io_port->iop_pdpar, 0x1fff);
|
|
|
|
setbits16(&io_port->iop_pddir, 0x1fff);
|
|
|
|
|
|
|
|
immr_unmap(io_port);
|
|
|
|
}
|
|
|
|
|
|
|
|
void init_fec_ioports(struct fs_platform_info *fpi)
|
|
|
|
{
|
|
|
|
int fec_no = fs_get_fec_index(fpi->fs_no);
|
|
|
|
|
|
|
|
switch (fec_no) {
|
|
|
|
case 0:
|
|
|
|
init_fec1_ioports(fpi);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
printk(KERN_ERR "init_fec_ioports: invalid FEC number\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void init_scc1_ioports(struct fs_platform_info* fpi)
|
|
|
|
{
|
|
|
|
unsigned *bcsr_io;
|
|
|
|
iop8xx_t *io_port;
|
|
|
|
cpm8xx_t *cp;
|
|
|
|
|
|
|
|
bcsr_io = ioremap(BCSR_ADDR, BCSR_SIZE);
|
|
|
|
io_port = (iop8xx_t *)immr_map(im_ioport);
|
|
|
|
cp = (cpm8xx_t *)immr_map(im_cpm);
|
|
|
|
|
|
|
|
if (bcsr_io == NULL) {
|
|
|
|
printk(KERN_CRIT "Could not remap BCSR\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Configure port A pins for Txd and Rxd.
|
|
|
|
*/
|
|
|
|
setbits16(&io_port->iop_papar, PA_ENET_RXD | PA_ENET_TXD);
|
|
|
|
clrbits16(&io_port->iop_padir, PA_ENET_RXD | PA_ENET_TXD);
|
|
|
|
clrbits16(&io_port->iop_paodr, PA_ENET_TXD);
|
|
|
|
|
|
|
|
/* Configure port C pins to enable CLSN and RENA.
|
|
|
|
*/
|
|
|
|
clrbits16(&io_port->iop_pcpar, PC_ENET_CLSN | PC_ENET_RENA);
|
|
|
|
clrbits16(&io_port->iop_pcdir, PC_ENET_CLSN | PC_ENET_RENA);
|
|
|
|
setbits16(&io_port->iop_pcso, PC_ENET_CLSN | PC_ENET_RENA);
|
|
|
|
|
|
|
|
/* Configure port A for TCLK and RCLK.
|
|
|
|
*/
|
|
|
|
setbits16(&io_port->iop_papar, PA_ENET_TCLK | PA_ENET_RCLK);
|
|
|
|
clrbits16(&io_port->iop_padir, PA_ENET_TCLK | PA_ENET_RCLK);
|
|
|
|
clrbits32(&cp->cp_pbpar, PB_ENET_TENA);
|
|
|
|
clrbits32(&cp->cp_pbdir, PB_ENET_TENA);
|
|
|
|
|
|
|
|
/* Configure Serial Interface clock routing.
|
|
|
|
* First, clear all SCC bits to zero, then set the ones we want.
|
|
|
|
*/
|
|
|
|
clrbits32(&cp->cp_sicr, SICR_ENET_MASK);
|
|
|
|
setbits32(&cp->cp_sicr, SICR_ENET_CLKRT);
|
|
|
|
|
|
|
|
/* In the original SCC enet driver the following code is placed at
|
|
|
|
the end of the initialization */
|
|
|
|
setbits32(&cp->cp_pbpar, PB_ENET_TENA);
|
|
|
|
setbits32(&cp->cp_pbdir, PB_ENET_TENA);
|
|
|
|
|
|
|
|
clrbits32(bcsr_io+1, BCSR1_ETHEN);
|
|
|
|
iounmap(bcsr_io);
|
|
|
|
immr_unmap(cp);
|
|
|
|
immr_unmap(io_port);
|
|
|
|
}
|
|
|
|
|
|
|
|
void init_scc_ioports(struct fs_platform_info *fpi)
|
|
|
|
{
|
|
|
|
int scc_no = fs_get_scc_index(fpi->fs_no);
|
|
|
|
|
|
|
|
switch (scc_no) {
|
|
|
|
case 0:
|
|
|
|
init_scc1_ioports(fpi);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static void init_smc1_uart_ioports(struct fs_uart_platform_info* ptr)
|
|
|
|
{
|
|
|
|
unsigned *bcsr_io;
|
|
|
|
cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm);
|
|
|
|
|
|
|
|
setbits32(&cp->cp_pbpar, 0x000000c0);
|
|
|
|
clrbits32(&cp->cp_pbdir, 0x000000c0);
|
|
|
|
clrbits16(&cp->cp_pbodr, 0x00c0);
|
|
|
|
immr_unmap(cp);
|
|
|
|
|
|
|
|
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
|
|
|
|
|
|
|
if (bcsr_io == NULL) {
|
|
|
|
printk(KERN_CRIT "Could not remap BCSR1\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
clrbits32(bcsr_io,BCSR1_RS232EN_1);
|
|
|
|
iounmap(bcsr_io);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void init_smc2_uart_ioports(struct fs_uart_platform_info* fpi)
|
|
|
|
{
|
|
|
|
unsigned *bcsr_io;
|
|
|
|
cpm8xx_t *cp = (cpm8xx_t *)immr_map(im_cpm);
|
|
|
|
|
|
|
|
setbits32(&cp->cp_pbpar, 0x00000c00);
|
|
|
|
clrbits32(&cp->cp_pbdir, 0x00000c00);
|
|
|
|
clrbits16(&cp->cp_pbodr, 0x0c00);
|
|
|
|
immr_unmap(cp);
|
|
|
|
|
|
|
|
bcsr_io = ioremap(BCSR1, sizeof(unsigned long));
|
|
|
|
|
|
|
|
if (bcsr_io == NULL) {
|
|
|
|
printk(KERN_CRIT "Could not remap BCSR1\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
clrbits32(bcsr_io,BCSR1_RS232EN_2);
|
|
|
|
iounmap(bcsr_io);
|
|
|
|
}
|
|
|
|
|
|
|
|
void init_smc_ioports(struct fs_uart_platform_info *data)
|
|
|
|
{
|
|
|
|
int smc_no = fs_uart_id_fsid2smc(data->fs_no);
|
|
|
|
|
|
|
|
switch (smc_no) {
|
|
|
|
case 0:
|
|
|
|
init_smc1_uart_ioports(data);
|
|
|
|
data->brg = data->clk_rx;
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
init_smc2_uart_ioports(data);
|
|
|
|
data->brg = data->clk_rx;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2007-04-03 12:26:41 +00:00
|
|
|
int platform_device_skip(const char *model, int id)
|
2007-01-24 19:42:10 +00:00
|
|
|
{
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init mpc86xads_setup_arch(void)
|
|
|
|
{
|
|
|
|
cpm_reset();
|
|
|
|
|
|
|
|
mpc86xads_board_setup();
|
|
|
|
|
|
|
|
ROOT_DEV = Root_NFS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init mpc86xads_probe(void)
|
|
|
|
{
|
|
|
|
char *model = of_get_flat_dt_prop(of_get_flat_dt_root(),
|
|
|
|
"model", NULL);
|
|
|
|
if (model == NULL)
|
|
|
|
return 0;
|
|
|
|
if (strcmp(model, "MPC866ADS"))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
define_machine(mpc86x_ads) {
|
|
|
|
.name = "MPC86x ADS",
|
|
|
|
.probe = mpc86xads_probe,
|
|
|
|
.setup_arch = mpc86xads_setup_arch,
|
|
|
|
.init_IRQ = m8xx_pic_init,
|
|
|
|
.show_cpuinfo = mpc8xx_show_cpuinfo,
|
|
|
|
.get_irq = mpc8xx_get_irq,
|
|
|
|
.restart = mpc8xx_restart,
|
|
|
|
.calibrate_decr = mpc8xx_calibrate_decr,
|
|
|
|
.set_rtc_time = mpc8xx_set_rtc_time,
|
|
|
|
.get_rtc_time = mpc8xx_get_rtc_time,
|
|
|
|
};
|