linux/drivers/gpu/drm/mgag200/Makefile

# SPDX-License-Identifier: GPL-2.0-only
mgag200-y   := mgag200_main.o mgag200_mode.o mgag200_cursor.o \
	mgag200_drv.o mgag200_i2c.o mgag200_ttm.o

obj-$(CONFIG_DRM_MGAG200) += mgag200.o
treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-05-19 12:07:45 +00:00			`# SPDX-License-Identifier: GPL-2.0-only`
drm/mgag200: Hardware cursor support G200 cards support, at best, 16 colour palleted images for the cursor so we do a conversion in the cursor_set function, and reject cursors with more than 16 colours, or cursors with partial transparency. Xorg falls back gracefully to software cursors in this case. We can't disable/enable the cursor hardware without causing momentary corruption around the cursor. Instead, once the cursor is on we leave it on, and simulate turning the cursor off by moving it offscreen. This works well. Since we can't disable -> update -> enable the cursors, we double buffer cursor icons, then just move the base address that points to the old cursor, to the new. This also works well, but uses an extra page of memory. The cursor buffers are lazily-allocated on first cursor_set. This is to make sure they don't take priority over any framebuffers in case of limited memory. Here is a representation of how the bitmap for the cursor is mapped in G200 memory : Each line of color cursor use 6 Slices of 8 bytes. Slices 0 to 3 are used for the 4bpp bitmap, slice 4 for XOR mask and slice 5 for AND mask. Each line has the following format: // Byte 0 Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6 Byte 7 // // S0: P00-01 P02-03 P04-05 P06-07 P08-09 P10-11 P12-13 P14-15 // S1: P16-17 P18-19 P20-21 P22-23 P24-25 P26-27 P28-29 P30-31 // S2: P32-33 P34-35 P36-37 P38-39 P40-41 P42-43 P44-45 P46-47 // S3: P48-49 P50-51 P52-53 P54-55 P56-57 P58-59 P60-61 P62-63 // S4: X63-56 X55-48 X47-40 X39-32 X31-24 X23-16 X15-08 X07-00 // S5: A63-56 A55-48 A47-40 A39-32 A31-24 A23-16 A15-08 A07-00 // // S0 to S5 = Slices 0 to 5 // P00 to P63 = Bitmap - pixels 0 to 63 // X00 to X63 = always 0 - pixels 0 to 63 // A00 to A63 = transparent markers - pixels 0 to 63 // 1 means colour, 0 means transparent Signed-off-by: Christopher Harvey <charvey@matrox.com> Signed-off-by: Mathieu Larouche <mathieu.larouche@matrox.com> Acked-by: Julia Lemire <jlemire@matrox.com> Tested-by: Julia Lemire <jlemire@matrox.com> Signed-off-by: Dave Airlie <airlied@gmail.com> 2013-06-05 19:24:26 +00:00			`mgag200-y := mgag200_main.o mgag200_mode.o mgag200_cursor.o \`
drm/mgag200: Replace struct mga_fbdev with generic framebuffer emulation This patch replaces mgag200's framebuffer console with DRM's generic implememtation. All respective code is being removed from the driver. The console is set up with a shadow buffer. The actual buffer object is not permanently pinned in video ram, but just another buffer object that the driver moves in and out of vram as necessary. The driver's function mga_crtc_do_set_base() used to contain special handling for the framebuffer console. With the new generic framebuffer, the driver does not need this code an longer. For consistency, this patch also changes the preferred framebuffer depth. The original code used 24 bpp by default and 32 bpp for the framebuffer. As 24 bpp is not well supported by userspace anyway, setting 32 bpp as default makes sense. v2: * rely on fbdev helpers error messages * document changes to preferred depth * dirty function no longer required Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/315832/ 2019-07-03 07:58:42 +00:00			`mgag200_drv.o mgag200_i2c.o mgag200_ttm.o`
mgag200: initial g200se driver (v2) This is a driver for the G200 server engines chips, it doesn't driver any of the Matrix G series desktop cards. It will bind to G200 SE A,B, G200EV, G200WB, G200EH and G200ER cards. Its based on previous work done my Matthew Garrett but remodelled to follow the same style and flow as the AST server driver. It also works along the same lines as the AST server driver wrt memory management. There is no userspace driver planned, xf86-video-modesetting should be used. It also appears these GPUs have no ARGB hw cursors. v2: add missing tagfifo reset + G200 SE memory bw setup pieces. Signed-off-by: Dave Airlie <airlied@redhat.com> 2012-04-17 14:01:25 +00:00
			`obj-$(CONFIG_DRM_MGAG200) += mgag200.o`