leandrof/linux
1
0
Fork 0
forked from Minki/linux
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c9386bfd37
linux/arch/powerpc/kernel/cpu_setup_power.S

219 lines
4.2 KiB
ArmAsm
Raw Normal View History

powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
/*
* This file contains low level CPU setup functions.
* Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cputable.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cache.h>
powerpc/mm: Move hash related mmu-*.h headers to book3s/ No code changes. Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-03-01 07:29:20 +00:00
#include <asm/book3s/64/mmu-hash.h>
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
/* Entry: r3 = crap, r4 = ptr to cputable entry
*
* Note that we can be called twice for pseudo-PVRs
*/
_GLOBAL(__setup_cpu_power7)
mflr r11
bl __init_hvmode_206
mtlr r11
beqlr
powerpc: Initialize TLB and LPID register on HV mode Power7 In case entry from the bootloader isn't "clean" Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-01 04:46:09 +00:00
li r0,0
mtspr SPRN_LPID,r0
powerpc/64s: Clear PCR on boot Clear the PCR (Processor Compatibility Register) on boot to ensure we are not running in a compatibility mode. We've seen this cause problems when a crash (and kdump) occurs while running compat mode guests. The kdump kernel then runs with the PCR set and causes problems. The symptom in the kdump kernel (also seen in petitboot after fast-reboot) is early userspace programs taking sigills on newer instructions (seen in libc). Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-18 01:37:42 +00:00
mtspr SPRN_PCR,r0
powerpc: Move initial mfspr LPCR out of __init_LPCR We want to change what's initially set in the LPCR, so start by taking the move from LPCR out of the function and into the caller. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-05 03:40:18 +00:00
mfspr r3,SPRN_LPCR
powerpc: Fixup LPCR:PECE and HEIC setting on POWER9 We need to set LPES in order for normal external interrupts (0x500) to be directed to the guest while running in guest state. We also need HEIC set to prevent them to be sent to the host while in host state. With XIVE the host never gets one of these and wouldn't know how to handle it. All host external interrupts come in via the new hypervisor virtualization interrupts vector. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 07:54:55 +00:00
li r4,(LPCR_LPES1 >> LPCR_LPES_SH)
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits, so don't set them on Power9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 19:12:17 +00:00
bl __init_LPCR_ISA206
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
mtlr r11
blr
_GLOBAL(__restore_cpu_power7)
mflr r11
mfmsr r3
rldicl. r0,r3,4,63
beqlr
powerpc: Initialize TLB and LPID register on HV mode Power7 In case entry from the bootloader isn't "clean" Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-01 04:46:09 +00:00
li r0,0
mtspr SPRN_LPID,r0
powerpc/64s: Clear PCR on boot Clear the PCR (Processor Compatibility Register) on boot to ensure we are not running in a compatibility mode. We've seen this cause problems when a crash (and kdump) occurs while running compat mode guests. The kdump kernel then runs with the PCR set and causes problems. The symptom in the kdump kernel (also seen in petitboot after fast-reboot) is early userspace programs taking sigills on newer instructions (seen in libc). Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-18 01:37:42 +00:00
mtspr SPRN_PCR,r0
powerpc: Move initial mfspr LPCR out of __init_LPCR We want to change what's initially set in the LPCR, so start by taking the move from LPCR out of the function and into the caller. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-05 03:40:18 +00:00
mfspr r3,SPRN_LPCR
powerpc: Fixup LPCR:PECE and HEIC setting on POWER9 We need to set LPES in order for normal external interrupts (0x500) to be directed to the guest while running in guest state. We also need HEIC set to prevent them to be sent to the host while in host state. With XIVE the host never gets one of these and wouldn't know how to handle it. All host external interrupts come in via the new hypervisor virtualization interrupts vector. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 07:54:55 +00:00
li r4,(LPCR_LPES1 >> LPCR_LPES_SH)
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits, so don't set them on Power9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 19:12:17 +00:00
bl __init_LPCR_ISA206
powerpc: Add POWER8 setup code Just a copy of POWER7 for now. Will update with new code later. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-30 19:34:14 +00:00
mtlr r11
blr
_GLOBAL(__setup_cpu_power8)
mflr r11
powerpc: Fix setting FSCR for HV=0 and on secondary CPUs Currently we only set the FSCR (Facility Status and Control Register) when HV=1 but this feature is available when HV=0 also. This patch sets FSCR when HV=0. Also, we currently only set the FSCR on the master CPU. This patch also sets the FSCR on secondary CPUs. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-04 19:45:50 +00:00
bl __init_FSCR
powerpc: Initialise PMU related regs on Power8 For both HV and guest kernels, intialise PMU regs to something sane. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-25 19:28:22 +00:00
bl __init_PMU
powerpc/perf: factor out power8 __init_pmu code Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26 17:37:06 +00:00
bl __init_PMU_ISA207
powerpc: Add POWER8 setup code Just a copy of POWER7 for now. Will update with new code later. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-30 19:34:14 +00:00
bl __init_hvmode_206
mtlr r11
beqlr
li r0,0
mtspr SPRN_LPID,r0
powerpc/64s: Clear PCR on boot Clear the PCR (Processor Compatibility Register) on boot to ensure we are not running in a compatibility mode. We've seen this cause problems when a crash (and kdump) occurs while running compat mode guests. The kdump kernel then runs with the PCR set and causes problems. The symptom in the kdump kernel (also seen in petitboot after fast-reboot) is early userspace programs taking sigills on newer instructions (seen in libc). Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-18 01:37:42 +00:00
mtspr SPRN_PCR,r0
powerpc: Move initial mfspr LPCR out of __init_LPCR We want to change what's initially set in the LPCR, so start by taking the move from LPCR out of the function and into the caller. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-05 03:40:18 +00:00
mfspr r3,SPRN_LPCR
powerpc/powernv: Enable POWER8 doorbell IPIs This patch enables POWER8 doorbell IPIs on powernv. Since doorbells can only IPI within a core, we test to see when we can use doorbells and if not we fall back to XICS. This also enables hypervisor doorbells to wakeup us up from nap/sleep via the LPCR PECEDH bit. Based on tests by Anton, the best case IPI latency between two threads dropped from 894ns to 512ns. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11 05:59:28 +00:00
ori r3, r3, LPCR_PECEDH
powerpc: Fixup LPCR:PECE and HEIC setting on POWER9 We need to set LPES in order for normal external interrupts (0x500) to be directed to the guest while running in guest state. We also need HEIC set to prevent them to be sent to the host while in host state. With XIVE the host never gets one of these and wouldn't know how to handle it. All host external interrupts come in via the new hypervisor virtualization interrupts vector. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 07:54:55 +00:00
li r4,0 /* LPES = 0 */
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits, so don't set them on Power9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 19:12:17 +00:00
bl __init_LPCR_ISA206
powerpc: Setup in HFSCR for POWER8 Setup the HFSCR (Hypervisor Facility Status and Control Register) for POWER8 when running HV=1. The HFSCR is the same as the FSCR except it's for hypervisors. It controls the available of various facilities in OS and userspace levels. It also indicates the cause of a hypervisor facility unavailable interrupt (although we are not using this here). This patch sets the facilities Linux knows about incase the firmware doesn't. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2013-03-05 17:35:24 +00:00
bl __init_HFSCR
powerpc: Initialise PMU related regs on Power8 For both HV and guest kernels, intialise PMU regs to something sane. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-25 19:28:22 +00:00
bl __init_PMU_HV
powerpc/perf: factor out power8 __init_pmu code Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26 17:37:06 +00:00
bl __init_PMU_HV_ISA207
powerpc: Add POWER8 setup code Just a copy of POWER7 for now. Will update with new code later. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-30 19:34:14 +00:00
mtlr r11
blr
_GLOBAL(__restore_cpu_power8)
mflr r11
powerpc: Fix setting FSCR for HV=0 and on secondary CPUs Currently we only set the FSCR (Facility Status and Control Register) when HV=1 but this feature is available when HV=0 also. This patch sets FSCR when HV=0. Also, we currently only set the FSCR on the master CPU. This patch also sets the FSCR on secondary CPUs. Signed-off-by: Michael Neuling <mikey@neuling.org> cc: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-03-04 19:45:50 +00:00
bl __init_FSCR
powerpc: Initialise PMU related regs on Power8 For both HV and guest kernels, intialise PMU regs to something sane. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-25 19:28:22 +00:00
bl __init_PMU
powerpc/perf: factor out power8 __init_pmu code Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26 17:37:06 +00:00
bl __init_PMU_ISA207
powerpc: Add POWER8 setup code Just a copy of POWER7 for now. Will update with new code later. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-30 19:34:14 +00:00
mfmsr r3
rldicl. r0,r3,4,63
powerpc/power8: Fix secondary CPUs hanging on boot for HV=0 In __restore_cpu_power8 we determine if we are HV and if not, we return before setting HV only resources. Unfortunately we forgot to restore the link register from r11 before returning. This will happen on boot and with secondary CPUs not coming online. This adds the missing link register restore. Signed-off-by: Michael Neuling <mikey@neuling.org> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-24 21:00:37 +00:00
mtlr r11
powerpc: Add POWER8 setup code Just a copy of POWER7 for now. Will update with new code later. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-10-30 19:34:14 +00:00
beqlr
li r0,0
mtspr SPRN_LPID,r0
powerpc/64s: Clear PCR on boot Clear the PCR (Processor Compatibility Register) on boot to ensure we are not running in a compatibility mode. We've seen this cause problems when a crash (and kdump) occurs while running compat mode guests. The kdump kernel then runs with the PCR set and causes problems. The symptom in the kdump kernel (also seen in petitboot after fast-reboot) is early userspace programs taking sigills on newer instructions (seen in libc). Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-18 01:37:42 +00:00
mtspr SPRN_PCR,r0
powerpc: Move initial mfspr LPCR out of __init_LPCR We want to change what's initially set in the LPCR, so start by taking the move from LPCR out of the function and into the caller. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-05 03:40:18 +00:00
mfspr r3,SPRN_LPCR
powerpc/powernv: Enable POWER8 doorbell IPIs This patch enables POWER8 doorbell IPIs on powernv. Since doorbells can only IPI within a core, we test to see when we can use doorbells and if not we fall back to XICS. This also enables hypervisor doorbells to wakeup us up from nap/sleep via the LPCR PECEDH bit. Based on tests by Anton, the best case IPI latency between two threads dropped from 894ns to 512ns. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2014-06-11 05:59:28 +00:00
ori r3, r3, LPCR_PECEDH
powerpc: Fixup LPCR:PECE and HEIC setting on POWER9 We need to set LPES in order for normal external interrupts (0x500) to be directed to the guest while running in guest state. We also need HEIC set to prevent them to be sent to the host while in host state. With XIVE the host never gets one of these and wouldn't know how to handle it. All host external interrupts come in via the new hypervisor virtualization interrupts vector. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 07:54:55 +00:00
li r4,0 /* LPES = 0 */
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits, so don't set them on Power9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 19:12:17 +00:00
bl __init_LPCR_ISA206
powerpc: Setup in HFSCR for POWER8 Setup the HFSCR (Hypervisor Facility Status and Control Register) for POWER8 when running HV=1. The HFSCR is the same as the FSCR except it's for hypervisors. It controls the available of various facilities in OS and userspace levels. It also indicates the cause of a hypervisor facility unavailable interrupt (although we are not using this here). This patch sets the facilities Linux knows about incase the firmware doesn't. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2013-03-05 17:35:24 +00:00
bl __init_HFSCR
powerpc: Initialise PMU related regs on Power8 For both HV and guest kernels, intialise PMU regs to something sane. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-25 19:28:22 +00:00
bl __init_PMU_HV
powerpc/perf: factor out power8 __init_pmu code Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26 17:37:06 +00:00
bl __init_PMU_HV_ISA207
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
mtlr r11
blr
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
_GLOBAL(__setup_cpu_power9)
mflr r11
bl __init_FSCR
powerpc/perf: factor out power8 __init_pmu code Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26 17:37:06 +00:00
bl __init_PMU
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
bl __init_hvmode_206
mtlr r11
beqlr
li r0,0
powernv: Clear SPRN_PSSCR when a POWER9 CPU comes online Ensure that PSSCR is set to a safe value corresponding to no state-loss each time a POWER9 CPU comes online. Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-By: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-22 18:06:40 +00:00
mtspr SPRN_PSSCR,r0
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
mtspr SPRN_LPID,r0
powerpc/64s: Initialize ISAv3 MMU registers before setting partition table kexec can leave MMU registers set when booting into a new kernel, the PIDR (Process Identification Register) in particular. The boot sequence does not zero PIDR, so it only gets set when CPUs first switch to a userspace processes (until then it's running a kernel thread with effective PID = 0). This leaves a window where a process table entry and page tables are set up due to user processes running on other CPUs, that happen to match with a stale PID. The CPU with that PID may cause speculative accesses that address quadrant 0 (aka userspace addresses), which will result in cached translations and PWC (Page Walk Cache) for that process, on a CPU which is not in the mm_cpumask and so they will not be invalidated properly. The most common result is the kernel hanging in infinite page fault loops soon after kexec (usually in schedule_tail, which is usually the first non-speculative quadrant 0 access to a new PID) due to a stale PWC. However being a stale translation error, it could result in anything up to security and data corruption problems. Fix this by zeroing out PIDR at boot and kexec. Fixes: 7e381c0ff618 ("powerpc/mm/radix: Add mmu context handling callback for radix") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-06 08:21:14 +00:00
mtspr SPRN_PID,r0
powerpc/64s: Clear PCR on boot Clear the PCR (Processor Compatibility Register) on boot to ensure we are not running in a compatibility mode. We've seen this cause problems when a crash (and kdump) occurs while running compat mode guests. The kdump kernel then runs with the PCR set and causes problems. The symptom in the kdump kernel (also seen in petitboot after fast-reboot) is early userspace programs taking sigills on newer instructions (seen in libc). Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-18 01:37:42 +00:00
mtspr SPRN_PCR,r0
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
mfspr r3,SPRN_LPCR
powerpc: Fixup LPCR:PECE and HEIC setting on POWER9 We need to set LPES in order for normal external interrupts (0x500) to be directed to the guest while running in guest state. We also need HEIC set to prevent them to be sent to the host while in host state. With XIVE the host never gets one of these and wouldn't know how to handle it. All host external interrupts come in via the new hypervisor virtualization interrupts vector. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 07:54:55 +00:00
LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
powerpc: Set missing wakeup bit in LPCR on POWER9 There is a new bit, LPCR_PECE_HVEE (Hypervisor Virtualization Exit Enable), which controls wakeup from STOP states on Hypervisor Virtualization Interrupts (which happen to also be all external interrupts in host or bare metal mode). It needs to be set or we will miss wakeups. Fixes: 9baaef0a22c8 ("powerpc/irq: Add support for HV virtualization interrupts") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rename it to HVEE to match the name in the ISA] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-21 07:08:05 +00:00
or r3, r3, r4
powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU We will set LPCR with correct value for radix during int. This make sure we start with a sanitized value of LPCR. In case of kexec, cpus can have LPCR value based on the previous translation mode we were running. Fixes: fe036a0605d60 ("powerpc/64/kexec: Fix MMU cleanup on radix") Cc: stable@vger.kernel.org # v4.9+ Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-22 05:12:02 +00:00
LOAD_REG_IMMEDIATE(r4, LPCR_UPRT | LPCR_HR)
andc r3, r3, r4
powerpc/64s: Revert setting of LPCR[LPES] on POWER9 The XIVE enablement patches included a change to set the LPES (Logical Partitioning Environment Selector) bit (bit # 3) in LPCR (Logical Partitioning Control Register) on POWER9 hosts. This bit sets external interrupts to guest delivery mode, which uses SRR0/1. The host's EE interrupt handler is written to expect HSRR0/1 (for earlier CPUs). This should be fine because XIVE is configured not to deliver EEs to the host (Hypervisor Virtulization Interrupt is used instead) so the EE handler should never be executed. However a bug in interrupt controller code, hardware, or odd configuration of a simulator could result in the host getting an EE incorrectly. Keeping the EE delivery mode matching the host EE handler prevents strange crashes due to using the wrong exception registers. KVM will configure the LPCR to set LPES prior to running a guest so that EEs are delivered to the guest using SRR0/1. Fixes: 08a1e650cc ("powerpc: Fixup LPCR:PECE and HEIC setting on POWER9") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Massage change log to avoid referring to LPES0 which is now renamed LPES] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 19:12:16 +00:00
li r4,0 /* LPES = 0 */
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits, so don't set them on Power9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 19:12:17 +00:00
bl __init_LPCR_ISA300
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
bl __init_HFSCR
powerpc/perf: factor out power8 __init_pmu code Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26 17:37:06 +00:00
bl __init_PMU_HV
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
mtlr r11
blr
_GLOBAL(__restore_cpu_power9)
mflr r11
bl __init_FSCR
powerpc/perf: factor out power8 __init_pmu code Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26 17:37:06 +00:00
bl __init_PMU
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
mfmsr r3
rldicl. r0,r3,4,63
mtlr r11
beqlr
li r0,0
powernv: Clear SPRN_PSSCR when a POWER9 CPU comes online Ensure that PSSCR is set to a safe value corresponding to no state-loss each time a POWER9 CPU comes online. Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-By: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-22 18:06:40 +00:00
mtspr SPRN_PSSCR,r0
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
mtspr SPRN_LPID,r0
powerpc/64s: Initialize ISAv3 MMU registers before setting partition table kexec can leave MMU registers set when booting into a new kernel, the PIDR (Process Identification Register) in particular. The boot sequence does not zero PIDR, so it only gets set when CPUs first switch to a userspace processes (until then it's running a kernel thread with effective PID = 0). This leaves a window where a process table entry and page tables are set up due to user processes running on other CPUs, that happen to match with a stale PID. The CPU with that PID may cause speculative accesses that address quadrant 0 (aka userspace addresses), which will result in cached translations and PWC (Page Walk Cache) for that process, on a CPU which is not in the mm_cpumask and so they will not be invalidated properly. The most common result is the kernel hanging in infinite page fault loops soon after kexec (usually in schedule_tail, which is usually the first non-speculative quadrant 0 access to a new PID) due to a stale PWC. However being a stale translation error, it could result in anything up to security and data corruption problems. Fix this by zeroing out PIDR at boot and kexec. Fixes: 7e381c0ff618 ("powerpc/mm/radix: Add mmu context handling callback for radix") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-12-06 08:21:14 +00:00
mtspr SPRN_PID,r0
powerpc/64s: Clear PCR on boot Clear the PCR (Processor Compatibility Register) on boot to ensure we are not running in a compatibility mode. We've seen this cause problems when a crash (and kdump) occurs while running compat mode guests. The kdump kernel then runs with the PCR set and causes problems. The symptom in the kdump kernel (also seen in petitboot after fast-reboot) is early userspace programs taking sigills on newer instructions (seen in libc). Signed-off-by: Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-05-18 01:37:42 +00:00
mtspr SPRN_PCR,r0
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
mfspr r3,SPRN_LPCR
powerpc: Fixup LPCR:PECE and HEIC setting on POWER9 We need to set LPES in order for normal external interrupts (0x500) to be directed to the guest while running in guest state. We also need HEIC set to prevent them to be sent to the host while in host state. With XIVE the host never gets one of these and wouldn't know how to handle it. All host external interrupts come in via the new hypervisor virtualization interrupts vector. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 07:54:55 +00:00
LOAD_REG_IMMEDIATE(r4, LPCR_PECEDH | LPCR_PECE_HVEE | LPCR_HVICE | LPCR_HEIC)
powerpc: Set missing wakeup bit in LPCR on POWER9 There is a new bit, LPCR_PECE_HVEE (Hypervisor Virtualization Exit Enable), which controls wakeup from STOP states on Hypervisor Virtualization Interrupts (which happen to also be all external interrupts in host or bare metal mode). It needs to be set or we will miss wakeups. Fixes: 9baaef0a22c8 ("powerpc/irq: Add support for HV virtualization interrupts") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [mpe: Rename it to HVEE to match the name in the ISA] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-21 07:08:05 +00:00
or r3, r3, r4
powerpc/mm/hash: Always clear UPRT and Host Radix bits when setting up CPU We will set LPCR with correct value for radix during int. This make sure we start with a sanitized value of LPCR. In case of kexec, cpus can have LPCR value based on the previous translation mode we were running. Fixes: fe036a0605d60 ("powerpc/64/kexec: Fix MMU cleanup on radix") Cc: stable@vger.kernel.org # v4.9+ Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-02-22 05:12:02 +00:00
LOAD_REG_IMMEDIATE(r4, LPCR_UPRT | LPCR_HR)
andc r3, r3, r4
powerpc/64s: Revert setting of LPCR[LPES] on POWER9 The XIVE enablement patches included a change to set the LPES (Logical Partitioning Environment Selector) bit (bit # 3) in LPCR (Logical Partitioning Control Register) on POWER9 hosts. This bit sets external interrupts to guest delivery mode, which uses SRR0/1. The host's EE interrupt handler is written to expect HSRR0/1 (for earlier CPUs). This should be fine because XIVE is configured not to deliver EEs to the host (Hypervisor Virtulization Interrupt is used instead) so the EE handler should never be executed. However a bug in interrupt controller code, hardware, or odd configuration of a simulator could result in the host getting an EE incorrectly. Keeping the EE delivery mode matching the host EE handler prevents strange crashes due to using the wrong exception registers. KVM will configure the LPCR to set LPES prior to running a guest so that EEs are delivered to the guest using SRR0/1. Fixes: 08a1e650cc ("powerpc: Fixup LPCR:PECE and HEIC setting on POWER9") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> [mpe: Massage change log to avoid referring to LPES0 which is now renamed LPES] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 19:12:16 +00:00
li r4,0 /* LPES = 0 */
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits, so don't set them on Power9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 19:12:17 +00:00
bl __init_LPCR_ISA300
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
bl __init_HFSCR
powerpc/perf: factor out power8 __init_pmu code Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26 17:37:06 +00:00
bl __init_PMU_HV
powerpc: Add POWER9 cputable entry Add a cputable entry for POWER9. More code is required to actually boot and run on a POWER9 but this gets the base piece in which we can start building on. Copies over from POWER8 except for: - Adds a new CPU_FTR_ARCH_300 bit to start hanging new architecture features from (in subsequent patches). - Advertises new user features bits PPC_FEATURE2_ARCH_3_00 & HAS_IEEE128 when on POWER9. - Drops CPU_FTR_SUBCORE. - Drops PMU code and machine check. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-19 00:16:24 +00:00
mtlr r11
blr
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
__init_hvmode_206:
powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to indicate that we have a usable hypervisor mode, and another to indicate that the processor conforms to PowerISA version 2.06. We also add another bit to indicate that the processor conforms to ISA version 2.01 and set that for PPC970 and derivatives. Some PPC970 chips (specifically those in Apple machines) have a hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode is not useful in the sense that there is no way to run any code in supervisor mode (HV=0 PR=0). On these processors, the LPES0 and LPES1 bits in HID4 are always 0, and we use that as a way of detecting that hypervisor mode is not useful. Where we have a feature section in assembly code around code that only applies on POWER7 in hypervisor mode, we use a construct like END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) The definition of END_FTR_SECTION_IFSET is such that the code will be enabled (not overwritten with nops) only if all bits in the provided mask are set. Note that the CPU feature check in __tlbie() only needs to check the ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called if we are running bare-metal, i.e. in hypervisor mode. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 00:26:11 +00:00
/* Disable CPU_FTR_HVMODE and exit if MSR:HV is not set */
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
mfmsr r3
rldicl. r0,r3,4,63
bnelr
ld r5,CPU_SPEC_FEATURES(r4)
powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to indicate that we have a usable hypervisor mode, and another to indicate that the processor conforms to PowerISA version 2.06. We also add another bit to indicate that the processor conforms to ISA version 2.01 and set that for PPC970 and derivatives. Some PPC970 chips (specifically those in Apple machines) have a hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode is not useful in the sense that there is no way to run any code in supervisor mode (HV=0 PR=0). On these processors, the LPES0 and LPES1 bits in HID4 are always 0, and we use that as a way of detecting that hypervisor mode is not useful. Where we have a feature section in assembly code around code that only applies on POWER7 in hypervisor mode, we use a construct like END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) The definition of END_FTR_SECTION_IFSET is such that the code will be enabled (not overwritten with nops) only if all bits in the provided mask are set. Note that the CPU feature check in __tlbie() only needs to check the ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called if we are running bare-metal, i.e. in hypervisor mode. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 00:26:11 +00:00
LOAD_REG_IMMEDIATE(r6,CPU_FTR_HVMODE)
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
xor r5,r5,r6
std r5,CPU_SPEC_FEATURES(r4)
blr
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits, so don't set them on Power9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 19:12:17 +00:00
__init_LPCR_ISA206:
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
/* Setup a sane LPCR:
powerpc: Fixup LPCR:PECE and HEIC setting on POWER9 We need to set LPES in order for normal external interrupts (0x500) to be directed to the guest while running in guest state. We also need HEIC set to prevent them to be sent to the host while in host state. With XIVE the host never gets one of these and wouldn't know how to handle it. All host external interrupts come in via the new hypervisor virtualization interrupts vector. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 07:54:55 +00:00
* Called with initial LPCR in R3 and desired LPES 2-bit value in R4
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
*
powerpc: Base support for exceptions using HSRR0/1 Pass the register type to the prolog, also provides alternate "HV" version of hardware interrupt (0x500) and adjust LPES accordingly We tag those interrupts by setting bit 0x2 in the trap number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-05 04:20:31 +00:00
* LPES = 0b01 (HSRR0/1 used for 0x500)
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
* PECE = 0b111
powerpc: Initialize LPCR:DPFD on power7 to a sane default This sets the default data stream prefetch size for operating systems that don't set their own value in DSCR. We use 4 which is "medium". Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 02:25:55 +00:00
* DPFD = 4
powerpc: Set up LPCR for running guest partitions In hypervisor mode, the LPCR controls several aspects of guest partitions, including virtual partition memory mode, and also controls whether the hypervisor decrementer interrupts are enabled. This sets up LPCR at boot time so that guest partitions will use a virtual real memory area (VRMA) composed of 16MB large pages, and hypervisor decrementer interrupts are disabled. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 00:20:24 +00:00
* HDICE = 0
* VC = 0b100 (VPM0=1, VPM1=0, ISL=0)
* VRMASD = 0b10000 (L=1, LP=00)
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
*
* Other bits untouched for now
*/
powerpc/64s: Power9 has no LPCR[VRMASD] field so don't set it Power9/ISAv3 has no VRMASD field in LPCR, we shouldn't be setting reserved bits, so don't set them on Power9. Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-18 19:12:17 +00:00
li r5,0x10
rldimi r3,r5, LPCR_VRMASD_SH, 64-LPCR_VRMASD_SH-5
/* POWER9 has no VRMASD */
__init_LPCR_ISA300:
powerpc: Fixup LPCR:PECE and HEIC setting on POWER9 We need to set LPES in order for normal external interrupts (0x500) to be directed to the guest while running in guest state. We also need HEIC set to prevent them to be sent to the host while in host state. With XIVE the host never gets one of these and wouldn't know how to handle it. All host external interrupts come in via the new hypervisor virtualization interrupts vector. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-04-05 07:54:55 +00:00
rldimi r3,r4, LPCR_LPES_SH, 64-LPCR_LPES_SH-2
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
ori r3,r3,(LPCR_PECE0|LPCR_PECE1|LPCR_PECE2)
powerpc: Initialize LPCR:DPFD on power7 to a sane default This sets the default data stream prefetch size for operating systems that don't set their own value in DSCR. We use 4 which is "medium". Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-24 02:25:55 +00:00
li r5,4
powerpc: Set up LPCR for running guest partitions In hypervisor mode, the LPCR controls several aspects of guest partitions, including virtual partition memory mode, and also controls whether the hypervisor decrementer interrupts are enabled. This sets up LPCR at boot time so that guest partitions will use a virtual real memory area (VRMA) composed of 16MB large pages, and hypervisor decrementer interrupts are disabled. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-29 00:20:24 +00:00
rldimi r3,r5, LPCR_DPFD_SH, 64-LPCR_DPFD_SH-3
clrrdi r3,r3,1 /* clear HDICE */
li r5,4
rldimi r3,r5, LPCR_VC_SH, 0
powerpc: Define CPU feature for Architected 2.06 HV mode This bit indicates that we are operating in hypervisor mode on a CPU compliant to architecture 2.06 or later (currently server only). We set it on POWER7 and have a boot-time CPU setup function that clears it if MSR:HV isn't set (booting under a hypervisor). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-20 07:50:55 +00:00
mtspr SPRN_LPCR,r3
isync
blr
powerpc: Initialize TLB and LPID register on HV mode Power7 In case entry from the bootloader isn't "clean" Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-01 04:46:09 +00:00
powerpc: Add support for context switching the TAR register This patch adds support for enabling and context switching the Target Address Register in Power8. The TAR is a new special purpose register that can be used for computed branches with the bctar[l] (branch conditional to TAR) instruction in the same manner as the count and link registers. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-07 15:46:58 +00:00
__init_FSCR:
mfspr r3,SPRN_FSCR
powerpc: Turn on the EBB H/FSCR bits This turns Event Based Branching (EBB) on in the Hypervisor Facility Status and Control Register (HFSCR) and Facility Status and Control Register (FSCR). Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-30 20:17:03 +00:00
ori r3,r3,FSCR_TAR|FSCR_DSCR|FSCR_EBB
powerpc: Add support for context switching the TAR register This patch adds support for enabling and context switching the Target Address Register in Power8. The TAR is a new special purpose register that can be used for computed branches with the bctar[l] (branch conditional to TAR) instruction in the same manner as the count and link registers. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-02-07 15:46:58 +00:00
mtspr SPRN_FSCR,r3
blr
powerpc: Setup in HFSCR for POWER8 Setup the HFSCR (Hypervisor Facility Status and Control Register) for POWER8 when running HV=1. The HFSCR is the same as the FSCR except it's for hypervisors. It controls the available of various facilities in OS and userspace levels. It also indicates the cause of a hypervisor facility unavailable interrupt (although we are not using this here). This patch sets the facilities Linux knows about incase the firmware doesn't. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2013-03-05 17:35:24 +00:00
__init_HFSCR:
mfspr r3,SPRN_HFSCR
powerpc: Setup BHRB instructions facility in HFSCR for POWER8 Make BHRB instructions available in problem and privileged states. Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-25 20:54:55 +00:00
ori r3,r3,HFSCR_TAR|HFSCR_TM|HFSCR_BHRB|HFSCR_PM|\
powerpc/powernv: Define and set POWER9 HFSCR doorbell bit Define and set the POWER9 HFSCR doorbell bit so that guests can use msgsndp. ISA 3.0 calls this MSGP, so name it accordingly in the code. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-11-22 23:44:09 +00:00
HFSCR_DSCR|HFSCR_VECVSX|HFSCR_FP|HFSCR_EBB|HFSCR_MSGP
powerpc: Setup in HFSCR for POWER8 Setup the HFSCR (Hypervisor Facility Status and Control Register) for POWER8 when running HV=1. The HFSCR is the same as the FSCR except it's for hypervisors. It controls the available of various facilities in OS and userspace levels. It also indicates the cause of a hypervisor facility unavailable interrupt (although we are not using this here). This patch sets the facilities Linux knows about incase the firmware doesn't. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
2013-03-05 17:35:24 +00:00
mtspr SPRN_HFSCR,r3
blr
powerpc: Initialise PMU related regs on Power8 For both HV and guest kernels, intialise PMU regs to something sane. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-25 19:28:22 +00:00
__init_PMU_HV:
li r5,0
mtspr SPRN_MMCRC,r5
powerpc/perf: factor out power8 __init_pmu code Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26 17:37:06 +00:00
blr
__init_PMU_HV_ISA207:
li r5,0
powerpc: Initialise PMU related regs on Power8 For both HV and guest kernels, intialise PMU regs to something sane. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-04-25 19:28:22 +00:00
mtspr SPRN_MMCRH,r5
blr
__init_PMU:
li r5,0
mtspr SPRN_MMCRA,r5
mtspr SPRN_MMCR0,r5
mtspr SPRN_MMCR1,r5
mtspr SPRN_MMCR2,r5
blr
powerpc/perf: factor out power8 __init_pmu code Factor out the power8 pmu init functions to share with power9. Monitor Mode Control Register S(MMCRS) and Monitor Mode Control Register H(MMCRH) registers are dropped in Power9. These registers are added to new function which are included for power8 init. Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-26 17:37:06 +00:00
__init_PMU_ISA207:
li r5,0
mtspr SPRN_MMCRS,r5
blr
Reference in New Issue Copy Permalink