linux/drivers/net/wireless/b43legacy/main.c

3857 lines
102 KiB
C
Raw Normal View History

/*
*
* Broadcom B43legacy wireless driver
*
* Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>
* Copyright (c) 2005 Stefano Brivio <st3@riseup.net>
* Copyright (c) 2005, 2006 Michael Buesch <mb@bu3sch.de>
* Copyright (c) 2005 Danny van Dyk <kugelfang@gentoo.org>
* Copyright (c) 2005 Andreas Jaggi <andreas.jaggi@waterwave.ch>
* Copyright (c) 2007 Larry Finger <Larry.Finger@lwfinger.net>
*
* Some parts of the code in this file are derived from the ipw2200
* driver Copyright(c) 2003 - 2004 Intel Corporation.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor,
* Boston, MA 02110-1301, USA.
*
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/version.h>
#include <linux/firmware.h>
#include <linux/wireless.h>
#include <linux/workqueue.h>
#include <linux/skbuff.h>
#include <linux/dma-mapping.h>
#include <net/dst.h>
#include <asm/unaligned.h>
#include "b43legacy.h"
#include "main.h"
#include "debugfs.h"
#include "phy.h"
#include "dma.h"
#include "pio.h"
#include "sysfs.h"
#include "xmit.h"
#include "radio.h"
MODULE_DESCRIPTION("Broadcom B43legacy wireless driver");
MODULE_AUTHOR("Martin Langer");
MODULE_AUTHOR("Stefano Brivio");
MODULE_AUTHOR("Michael Buesch");
MODULE_LICENSE("GPL");
#if defined(CONFIG_B43LEGACY_DMA) && defined(CONFIG_B43LEGACY_PIO)
static int modparam_pio;
module_param_named(pio, modparam_pio, int, 0444);
MODULE_PARM_DESC(pio, "enable(1) / disable(0) PIO mode");
#elif defined(CONFIG_B43LEGACY_DMA)
# define modparam_pio 0
#elif defined(CONFIG_B43LEGACY_PIO)
# define modparam_pio 1
#endif
static int modparam_bad_frames_preempt;
module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
MODULE_PARM_DESC(bad_frames_preempt, "enable(1) / disable(0) Bad Frames"
" Preemption");
static int modparam_short_retry = B43legacy_DEFAULT_SHORT_RETRY_LIMIT;
module_param_named(short_retry, modparam_short_retry, int, 0444);
MODULE_PARM_DESC(short_retry, "Short-Retry-Limit (0 - 15)");
static int modparam_long_retry = B43legacy_DEFAULT_LONG_RETRY_LIMIT;
module_param_named(long_retry, modparam_long_retry, int, 0444);
MODULE_PARM_DESC(long_retry, "Long-Retry-Limit (0 - 15)");
static int modparam_noleds;
module_param_named(noleds, modparam_noleds, int, 0444);
MODULE_PARM_DESC(noleds, "Turn off all LED activity");
static char modparam_fwpostfix[16];
module_param_string(fwpostfix, modparam_fwpostfix, 16, 0444);
MODULE_PARM_DESC(fwpostfix, "Postfix for the firmware files to load.");
/* The following table supports BCM4301, BCM4303 and BCM4306/2 devices. */
static const struct ssb_device_id b43legacy_ssb_tbl[] = {
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 2),
SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_80211, 4),
SSB_DEVTABLE_END
};
MODULE_DEVICE_TABLE(ssb, b43legacy_ssb_tbl);
/* Channel and ratetables are shared for all devices.
* They can't be const, because ieee80211 puts some precalculated
* data in there. This data is the same for all devices, so we don't
* get concurrency issues */
#define RATETAB_ENT(_rateid, _flags) \
{ \
.rate = B43legacy_RATE_TO_100KBPS(_rateid), \
.val = (_rateid), \
.val2 = (_rateid), \
.flags = (_flags), \
}
static struct ieee80211_rate __b43legacy_ratetable[] = {
RATETAB_ENT(B43legacy_CCK_RATE_1MB, IEEE80211_RATE_CCK),
RATETAB_ENT(B43legacy_CCK_RATE_2MB, IEEE80211_RATE_CCK_2),
RATETAB_ENT(B43legacy_CCK_RATE_5MB, IEEE80211_RATE_CCK_2),
RATETAB_ENT(B43legacy_CCK_RATE_11MB, IEEE80211_RATE_CCK_2),
RATETAB_ENT(B43legacy_OFDM_RATE_6MB, IEEE80211_RATE_OFDM),
RATETAB_ENT(B43legacy_OFDM_RATE_9MB, IEEE80211_RATE_OFDM),
RATETAB_ENT(B43legacy_OFDM_RATE_12MB, IEEE80211_RATE_OFDM),
RATETAB_ENT(B43legacy_OFDM_RATE_18MB, IEEE80211_RATE_OFDM),
RATETAB_ENT(B43legacy_OFDM_RATE_24MB, IEEE80211_RATE_OFDM),
RATETAB_ENT(B43legacy_OFDM_RATE_36MB, IEEE80211_RATE_OFDM),
RATETAB_ENT(B43legacy_OFDM_RATE_48MB, IEEE80211_RATE_OFDM),
RATETAB_ENT(B43legacy_OFDM_RATE_54MB, IEEE80211_RATE_OFDM),
};
#define b43legacy_a_ratetable (__b43legacy_ratetable + 4)
#define b43legacy_a_ratetable_size 8
#define b43legacy_b_ratetable (__b43legacy_ratetable + 0)
#define b43legacy_b_ratetable_size 4
#define b43legacy_g_ratetable (__b43legacy_ratetable + 0)
#define b43legacy_g_ratetable_size 12
#define CHANTAB_ENT(_chanid, _freq) \
{ \
.chan = (_chanid), \
.freq = (_freq), \
.val = (_chanid), \
.flag = IEEE80211_CHAN_W_SCAN | \
IEEE80211_CHAN_W_ACTIVE_SCAN | \
IEEE80211_CHAN_W_IBSS, \
.power_level = 0x0A, \
.antenna_max = 0xFF, \
}
static struct ieee80211_channel b43legacy_bg_chantable[] = {
CHANTAB_ENT(1, 2412),
CHANTAB_ENT(2, 2417),
CHANTAB_ENT(3, 2422),
CHANTAB_ENT(4, 2427),
CHANTAB_ENT(5, 2432),
CHANTAB_ENT(6, 2437),
CHANTAB_ENT(7, 2442),
CHANTAB_ENT(8, 2447),
CHANTAB_ENT(9, 2452),
CHANTAB_ENT(10, 2457),
CHANTAB_ENT(11, 2462),
CHANTAB_ENT(12, 2467),
CHANTAB_ENT(13, 2472),
CHANTAB_ENT(14, 2484),
};
#define b43legacy_bg_chantable_size ARRAY_SIZE(b43legacy_bg_chantable)
static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev);
static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev);
static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev);
static int b43legacy_wireless_core_start(struct b43legacy_wldev *dev);
static int b43legacy_ratelimit(struct b43legacy_wl *wl)
{
if (!wl || !wl->current_dev)
return 1;
if (b43legacy_status(wl->current_dev) < B43legacy_STAT_STARTED)
return 1;
/* We are up and running.
* Ratelimit the messages to avoid DoS over the net. */
return net_ratelimit();
}
void b43legacyinfo(struct b43legacy_wl *wl, const char *fmt, ...)
{
va_list args;
if (!b43legacy_ratelimit(wl))
return;
va_start(args, fmt);
printk(KERN_INFO "b43legacy-%s: ",
(wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
vprintk(fmt, args);
va_end(args);
}
void b43legacyerr(struct b43legacy_wl *wl, const char *fmt, ...)
{
va_list args;
if (!b43legacy_ratelimit(wl))
return;
va_start(args, fmt);
printk(KERN_ERR "b43legacy-%s ERROR: ",
(wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
vprintk(fmt, args);
va_end(args);
}
void b43legacywarn(struct b43legacy_wl *wl, const char *fmt, ...)
{
va_list args;
if (!b43legacy_ratelimit(wl))
return;
va_start(args, fmt);
printk(KERN_WARNING "b43legacy-%s warning: ",
(wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
vprintk(fmt, args);
va_end(args);
}
#if B43legacy_DEBUG
void b43legacydbg(struct b43legacy_wl *wl, const char *fmt, ...)
{
va_list args;
va_start(args, fmt);
printk(KERN_DEBUG "b43legacy-%s debug: ",
(wl && wl->hw) ? wiphy_name(wl->hw->wiphy) : "wlan");
vprintk(fmt, args);
va_end(args);
}
#endif /* DEBUG */
static void b43legacy_ram_write(struct b43legacy_wldev *dev, u16 offset,
u32 val)
{
u32 status;
B43legacy_WARN_ON(offset % 4 != 0);
status = b43legacy_read32(dev, B43legacy_MMIO_STATUS_BITFIELD);
if (status & B43legacy_SBF_XFER_REG_BYTESWAP)
val = swab32(val);
b43legacy_write32(dev, B43legacy_MMIO_RAM_CONTROL, offset);
mmiowb();
b43legacy_write32(dev, B43legacy_MMIO_RAM_DATA, val);
}
static inline
void b43legacy_shm_control_word(struct b43legacy_wldev *dev,
u16 routing, u16 offset)
{
u32 control;
/* "offset" is the WORD offset. */
control = routing;
control <<= 16;
control |= offset;
b43legacy_write32(dev, B43legacy_MMIO_SHM_CONTROL, control);
}
u32 b43legacy_shm_read32(struct b43legacy_wldev *dev,
u16 routing, u16 offset)
{
u32 ret;
if (routing == B43legacy_SHM_SHARED) {
B43legacy_WARN_ON((offset & 0x0001) != 0);
if (offset & 0x0003) {
/* Unaligned access */
b43legacy_shm_control_word(dev, routing, offset >> 2);
ret = b43legacy_read16(dev,
B43legacy_MMIO_SHM_DATA_UNALIGNED);
ret <<= 16;
b43legacy_shm_control_word(dev, routing,
(offset >> 2) + 1);
ret |= b43legacy_read16(dev, B43legacy_MMIO_SHM_DATA);
return ret;
}
offset >>= 2;
}
b43legacy_shm_control_word(dev, routing, offset);
ret = b43legacy_read32(dev, B43legacy_MMIO_SHM_DATA);
return ret;
}
u16 b43legacy_shm_read16(struct b43legacy_wldev *dev,
u16 routing, u16 offset)
{
u16 ret;
if (routing == B43legacy_SHM_SHARED) {
B43legacy_WARN_ON((offset & 0x0001) != 0);
if (offset & 0x0003) {
/* Unaligned access */
b43legacy_shm_control_word(dev, routing, offset >> 2);
ret = b43legacy_read16(dev,
B43legacy_MMIO_SHM_DATA_UNALIGNED);
return ret;
}
offset >>= 2;
}
b43legacy_shm_control_word(dev, routing, offset);
ret = b43legacy_read16(dev, B43legacy_MMIO_SHM_DATA);
return ret;
}
void b43legacy_shm_write32(struct b43legacy_wldev *dev,
u16 routing, u16 offset,
u32 value)
{
if (routing == B43legacy_SHM_SHARED) {
B43legacy_WARN_ON((offset & 0x0001) != 0);
if (offset & 0x0003) {
/* Unaligned access */
b43legacy_shm_control_word(dev, routing, offset >> 2);
mmiowb();
b43legacy_write16(dev,
B43legacy_MMIO_SHM_DATA_UNALIGNED,
(value >> 16) & 0xffff);
mmiowb();
b43legacy_shm_control_word(dev, routing,
(offset >> 2) + 1);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_SHM_DATA,
value & 0xffff);
return;
}
offset >>= 2;
}
b43legacy_shm_control_word(dev, routing, offset);
mmiowb();
b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA, value);
}
void b43legacy_shm_write16(struct b43legacy_wldev *dev, u16 routing, u16 offset,
u16 value)
{
if (routing == B43legacy_SHM_SHARED) {
B43legacy_WARN_ON((offset & 0x0001) != 0);
if (offset & 0x0003) {
/* Unaligned access */
b43legacy_shm_control_word(dev, routing, offset >> 2);
mmiowb();
b43legacy_write16(dev,
B43legacy_MMIO_SHM_DATA_UNALIGNED,
value);
return;
}
offset >>= 2;
}
b43legacy_shm_control_word(dev, routing, offset);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_SHM_DATA, value);
}
/* Read HostFlags */
u32 b43legacy_hf_read(struct b43legacy_wldev *dev)
{
u32 ret;
ret = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_HOSTFHI);
ret <<= 16;
ret |= b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_HOSTFLO);
return ret;
}
/* Write HostFlags */
void b43legacy_hf_write(struct b43legacy_wldev *dev, u32 value)
{
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_HOSTFLO,
(value & 0x0000FFFF));
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_HOSTFHI,
((value & 0xFFFF0000) >> 16));
}
void b43legacy_tsf_read(struct b43legacy_wldev *dev, u64 *tsf)
{
/* We need to be careful. As we read the TSF from multiple
* registers, we should take care of register overflows.
* In theory, the whole tsf read process should be atomic.
* We try to be atomic here, by restaring the read process,
* if any of the high registers changed (overflew).
*/
if (dev->dev->id.revision >= 3) {
u32 low;
u32 high;
u32 high2;
do {
high = b43legacy_read32(dev,
B43legacy_MMIO_REV3PLUS_TSF_HIGH);
low = b43legacy_read32(dev,
B43legacy_MMIO_REV3PLUS_TSF_LOW);
high2 = b43legacy_read32(dev,
B43legacy_MMIO_REV3PLUS_TSF_HIGH);
} while (unlikely(high != high2));
*tsf = high;
*tsf <<= 32;
*tsf |= low;
} else {
u64 tmp;
u16 v0;
u16 v1;
u16 v2;
u16 v3;
u16 test1;
u16 test2;
u16 test3;
do {
v3 = b43legacy_read16(dev, B43legacy_MMIO_TSF_3);
v2 = b43legacy_read16(dev, B43legacy_MMIO_TSF_2);
v1 = b43legacy_read16(dev, B43legacy_MMIO_TSF_1);
v0 = b43legacy_read16(dev, B43legacy_MMIO_TSF_0);
test3 = b43legacy_read16(dev, B43legacy_MMIO_TSF_3);
test2 = b43legacy_read16(dev, B43legacy_MMIO_TSF_2);
test1 = b43legacy_read16(dev, B43legacy_MMIO_TSF_1);
} while (v3 != test3 || v2 != test2 || v1 != test1);
*tsf = v3;
*tsf <<= 48;
tmp = v2;
tmp <<= 32;
*tsf |= tmp;
tmp = v1;
tmp <<= 16;
*tsf |= tmp;
*tsf |= v0;
}
}
static void b43legacy_time_lock(struct b43legacy_wldev *dev)
{
u32 status;
status = b43legacy_read32(dev, B43legacy_MMIO_STATUS_BITFIELD);
status |= B43legacy_SBF_TIME_UPDATE;
b43legacy_write32(dev, B43legacy_MMIO_STATUS_BITFIELD, status);
mmiowb();
}
static void b43legacy_time_unlock(struct b43legacy_wldev *dev)
{
u32 status;
status = b43legacy_read32(dev, B43legacy_MMIO_STATUS_BITFIELD);
status &= ~B43legacy_SBF_TIME_UPDATE;
b43legacy_write32(dev, B43legacy_MMIO_STATUS_BITFIELD, status);
}
static void b43legacy_tsf_write_locked(struct b43legacy_wldev *dev, u64 tsf)
{
/* Be careful with the in-progress timer.
* First zero out the low register, so we have a full
* register-overflow duration to complete the operation.
*/
if (dev->dev->id.revision >= 3) {
u32 lo = (tsf & 0x00000000FFFFFFFFULL);
u32 hi = (tsf & 0xFFFFFFFF00000000ULL) >> 32;
b43legacy_write32(dev, B43legacy_MMIO_REV3PLUS_TSF_LOW, 0);
mmiowb();
b43legacy_write32(dev, B43legacy_MMIO_REV3PLUS_TSF_HIGH,
hi);
mmiowb();
b43legacy_write32(dev, B43legacy_MMIO_REV3PLUS_TSF_LOW,
lo);
} else {
u16 v0 = (tsf & 0x000000000000FFFFULL);
u16 v1 = (tsf & 0x00000000FFFF0000ULL) >> 16;
u16 v2 = (tsf & 0x0000FFFF00000000ULL) >> 32;
u16 v3 = (tsf & 0xFFFF000000000000ULL) >> 48;
b43legacy_write16(dev, B43legacy_MMIO_TSF_0, 0);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_TSF_3, v3);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_TSF_2, v2);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_TSF_1, v1);
mmiowb();
b43legacy_write16(dev, B43legacy_MMIO_TSF_0, v0);
}
}
void b43legacy_tsf_write(struct b43legacy_wldev *dev, u64 tsf)
{
b43legacy_time_lock(dev);
b43legacy_tsf_write_locked(dev, tsf);
b43legacy_time_unlock(dev);
}
static
void b43legacy_macfilter_set(struct b43legacy_wldev *dev,
u16 offset, const u8 *mac)
{
static const u8 zero_addr[ETH_ALEN] = { 0 };
u16 data;
if (!mac)
mac = zero_addr;
offset |= 0x0020;
b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_CONTROL, offset);
data = mac[0];
data |= mac[1] << 8;
b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_DATA, data);
data = mac[2];
data |= mac[3] << 8;
b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_DATA, data);
data = mac[4];
data |= mac[5] << 8;
b43legacy_write16(dev, B43legacy_MMIO_MACFILTER_DATA, data);
}
static void b43legacy_write_mac_bssid_templates(struct b43legacy_wldev *dev)
{
static const u8 zero_addr[ETH_ALEN] = { 0 };
const u8 *mac = dev->wl->mac_addr;
const u8 *bssid = dev->wl->bssid;
u8 mac_bssid[ETH_ALEN * 2];
int i;
u32 tmp;
if (!bssid)
bssid = zero_addr;
if (!mac)
mac = zero_addr;
b43legacy_macfilter_set(dev, B43legacy_MACFILTER_BSSID, bssid);
memcpy(mac_bssid, mac, ETH_ALEN);
memcpy(mac_bssid + ETH_ALEN, bssid, ETH_ALEN);
/* Write our MAC address and BSSID to template ram */
for (i = 0; i < ARRAY_SIZE(mac_bssid); i += sizeof(u32)) {
tmp = (u32)(mac_bssid[i + 0]);
tmp |= (u32)(mac_bssid[i + 1]) << 8;
tmp |= (u32)(mac_bssid[i + 2]) << 16;
tmp |= (u32)(mac_bssid[i + 3]) << 24;
b43legacy_ram_write(dev, 0x20 + i, tmp);
b43legacy_ram_write(dev, 0x78 + i, tmp);
b43legacy_ram_write(dev, 0x478 + i, tmp);
}
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
static void b43legacy_upload_card_macaddress(struct b43legacy_wldev *dev)
{
b43legacy_write_mac_bssid_templates(dev);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
b43legacy_macfilter_set(dev, B43legacy_MACFILTER_SELF,
dev->wl->mac_addr);
}
static void b43legacy_set_slot_time(struct b43legacy_wldev *dev,
u16 slot_time)
{
/* slot_time is in usec. */
if (dev->phy.type != B43legacy_PHYTYPE_G)
return;
b43legacy_write16(dev, 0x684, 510 + slot_time);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0010,
slot_time);
}
static void b43legacy_short_slot_timing_enable(struct b43legacy_wldev *dev)
{
b43legacy_set_slot_time(dev, 9);
dev->short_slot = 1;
}
static void b43legacy_short_slot_timing_disable(struct b43legacy_wldev *dev)
{
b43legacy_set_slot_time(dev, 20);
dev->short_slot = 0;
}
/* Enable a Generic IRQ. "mask" is the mask of which IRQs to enable.
* Returns the _previously_ enabled IRQ mask.
*/
static inline u32 b43legacy_interrupt_enable(struct b43legacy_wldev *dev,
u32 mask)
{
u32 old_mask;
old_mask = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, old_mask |
mask);
return old_mask;
}
/* Disable a Generic IRQ. "mask" is the mask of which IRQs to disable.
* Returns the _previously_ enabled IRQ mask.
*/
static inline u32 b43legacy_interrupt_disable(struct b43legacy_wldev *dev,
u32 mask)
{
u32 old_mask;
old_mask = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_MASK, old_mask & ~mask);
return old_mask;
}
/* Synchronize IRQ top- and bottom-half.
* IRQs must be masked before calling this.
* This must not be called with the irq_lock held.
*/
static void b43legacy_synchronize_irq(struct b43legacy_wldev *dev)
{
synchronize_irq(dev->dev->irq);
tasklet_kill(&dev->isr_tasklet);
}
/* DummyTransmission function, as documented on
* http://bcm-specs.sipsolutions.net/DummyTransmission
*/
void b43legacy_dummy_transmission(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
unsigned int i;
unsigned int max_loop;
u16 value;
u32 buffer[5] = {
0x00000000,
0x00D40000,
0x00000000,
0x01000000,
0x00000000,
};
switch (phy->type) {
case B43legacy_PHYTYPE_B:
case B43legacy_PHYTYPE_G:
max_loop = 0xFA;
buffer[0] = 0x000B846E;
break;
default:
B43legacy_BUG_ON(1);
return;
}
for (i = 0; i < 5; i++)
b43legacy_ram_write(dev, i * 4, buffer[i]);
/* dummy read follows */
b43legacy_read32(dev, B43legacy_MMIO_STATUS_BITFIELD);
b43legacy_write16(dev, 0x0568, 0x0000);
b43legacy_write16(dev, 0x07C0, 0x0000);
b43legacy_write16(dev, 0x050C, 0x0000);
b43legacy_write16(dev, 0x0508, 0x0000);
b43legacy_write16(dev, 0x050A, 0x0000);
b43legacy_write16(dev, 0x054C, 0x0000);
b43legacy_write16(dev, 0x056A, 0x0014);
b43legacy_write16(dev, 0x0568, 0x0826);
b43legacy_write16(dev, 0x0500, 0x0000);
b43legacy_write16(dev, 0x0502, 0x0030);
if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
b43legacy_radio_write16(dev, 0x0051, 0x0017);
for (i = 0x00; i < max_loop; i++) {
value = b43legacy_read16(dev, 0x050E);
if (value & 0x0080)
break;
udelay(10);
}
for (i = 0x00; i < 0x0A; i++) {
value = b43legacy_read16(dev, 0x050E);
if (value & 0x0400)
break;
udelay(10);
}
for (i = 0x00; i < 0x0A; i++) {
value = b43legacy_read16(dev, 0x0690);
if (!(value & 0x0100))
break;
udelay(10);
}
if (phy->radio_ver == 0x2050 && phy->radio_rev <= 0x5)
b43legacy_radio_write16(dev, 0x0051, 0x0037);
}
/* Turn the Analog ON/OFF */
static void b43legacy_switch_analog(struct b43legacy_wldev *dev, int on)
{
b43legacy_write16(dev, B43legacy_MMIO_PHY0, on ? 0 : 0xF4);
}
void b43legacy_wireless_core_reset(struct b43legacy_wldev *dev, u32 flags)
{
u32 tmslow;
u32 macctl;
flags |= B43legacy_TMSLOW_PHYCLKEN;
flags |= B43legacy_TMSLOW_PHYRESET;
ssb_device_enable(dev->dev, flags);
msleep(2); /* Wait for the PLL to turn on. */
/* Now take the PHY out of Reset again */
tmslow = ssb_read32(dev->dev, SSB_TMSLOW);
tmslow |= SSB_TMSLOW_FGC;
tmslow &= ~B43legacy_TMSLOW_PHYRESET;
ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
ssb_read32(dev->dev, SSB_TMSLOW); /* flush */
msleep(1);
tmslow &= ~SSB_TMSLOW_FGC;
ssb_write32(dev->dev, SSB_TMSLOW, tmslow);
ssb_read32(dev->dev, SSB_TMSLOW); /* flush */
msleep(1);
/* Turn Analog ON */
b43legacy_switch_analog(dev, 1);
macctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
macctl &= ~B43legacy_MACCTL_GMODE;
if (flags & B43legacy_TMSLOW_GMODE) {
macctl |= B43legacy_MACCTL_GMODE;
dev->phy.gmode = 1;
} else
dev->phy.gmode = 0;
macctl |= B43legacy_MACCTL_IHR_ENABLED;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
}
static void handle_irq_transmit_status(struct b43legacy_wldev *dev)
{
u32 v0;
u32 v1;
u16 tmp;
struct b43legacy_txstatus stat;
while (1) {
v0 = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_0);
if (!(v0 & 0x00000001))
break;
v1 = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_1);
stat.cookie = (v0 >> 16);
stat.seq = (v1 & 0x0000FFFF);
stat.phy_stat = ((v1 & 0x00FF0000) >> 16);
tmp = (v0 & 0x0000FFFF);
stat.frame_count = ((tmp & 0xF000) >> 12);
stat.rts_count = ((tmp & 0x0F00) >> 8);
stat.supp_reason = ((tmp & 0x001C) >> 2);
stat.pm_indicated = !!(tmp & 0x0080);
stat.intermediate = !!(tmp & 0x0040);
stat.for_ampdu = !!(tmp & 0x0020);
stat.acked = !!(tmp & 0x0002);
b43legacy_handle_txstatus(dev, &stat);
}
}
static void drain_txstatus_queue(struct b43legacy_wldev *dev)
{
u32 dummy;
if (dev->dev->id.revision < 5)
return;
/* Read all entries from the microcode TXstatus FIFO
* and throw them away.
*/
while (1) {
dummy = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_0);
if (!(dummy & 0x00000001))
break;
dummy = b43legacy_read32(dev, B43legacy_MMIO_XMITSTAT_1);
}
}
static u32 b43legacy_jssi_read(struct b43legacy_wldev *dev)
{
u32 val = 0;
val = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, 0x40A);
val <<= 16;
val |= b43legacy_shm_read16(dev, B43legacy_SHM_SHARED, 0x408);
return val;
}
static void b43legacy_jssi_write(struct b43legacy_wldev *dev, u32 jssi)
{
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x408,
(jssi & 0x0000FFFF));
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x40A,
(jssi & 0xFFFF0000) >> 16);
}
static void b43legacy_generate_noise_sample(struct b43legacy_wldev *dev)
{
b43legacy_jssi_write(dev, 0x7F7F7F7F);
b43legacy_write32(dev, B43legacy_MMIO_STATUS2_BITFIELD,
b43legacy_read32(dev,
B43legacy_MMIO_STATUS2_BITFIELD)
| (1 << 4));
B43legacy_WARN_ON(dev->noisecalc.channel_at_start !=
dev->phy.channel);
}
static void b43legacy_calculate_link_quality(struct b43legacy_wldev *dev)
{
/* Top half of Link Quality calculation. */
if (dev->noisecalc.calculation_running)
return;
dev->noisecalc.channel_at_start = dev->phy.channel;
dev->noisecalc.calculation_running = 1;
dev->noisecalc.nr_samples = 0;
b43legacy_generate_noise_sample(dev);
}
static void handle_irq_noise(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
u16 tmp;
u8 noise[4];
u8 i;
u8 j;
s32 average;
/* Bottom half of Link Quality calculation. */
B43legacy_WARN_ON(!dev->noisecalc.calculation_running);
if (dev->noisecalc.channel_at_start != phy->channel)
goto drop_calculation;
*((__le32 *)noise) = cpu_to_le32(b43legacy_jssi_read(dev));
if (noise[0] == 0x7F || noise[1] == 0x7F ||
noise[2] == 0x7F || noise[3] == 0x7F)
goto generate_new;
/* Get the noise samples. */
B43legacy_WARN_ON(dev->noisecalc.nr_samples >= 8);
i = dev->noisecalc.nr_samples;
noise[0] = limit_value(noise[0], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
noise[1] = limit_value(noise[1], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
noise[2] = limit_value(noise[2], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
noise[3] = limit_value(noise[3], 0, ARRAY_SIZE(phy->nrssi_lt) - 1);
dev->noisecalc.samples[i][0] = phy->nrssi_lt[noise[0]];
dev->noisecalc.samples[i][1] = phy->nrssi_lt[noise[1]];
dev->noisecalc.samples[i][2] = phy->nrssi_lt[noise[2]];
dev->noisecalc.samples[i][3] = phy->nrssi_lt[noise[3]];
dev->noisecalc.nr_samples++;
if (dev->noisecalc.nr_samples == 8) {
/* Calculate the Link Quality by the noise samples. */
average = 0;
for (i = 0; i < 8; i++) {
for (j = 0; j < 4; j++)
average += dev->noisecalc.samples[i][j];
}
average /= (8 * 4);
average *= 125;
average += 64;
average /= 128;
tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
0x40C);
tmp = (tmp / 128) & 0x1F;
if (tmp >= 8)
average += 2;
else
average -= 25;
if (tmp == 8)
average -= 72;
else
average -= 48;
dev->stats.link_noise = average;
drop_calculation:
dev->noisecalc.calculation_running = 0;
return;
}
generate_new:
b43legacy_generate_noise_sample(dev);
}
static void handle_irq_tbtt_indication(struct b43legacy_wldev *dev)
{
if (b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) {
/* TODO: PS TBTT */
} else {
if (1/*FIXME: the last PSpoll frame was sent successfully */)
b43legacy_power_saving_ctl_bits(dev, -1, -1);
}
dev->reg124_set_0x4 = 0;
if (b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_IBSS))
dev->reg124_set_0x4 = 1;
}
static void handle_irq_atim_end(struct b43legacy_wldev *dev)
{
if (!dev->reg124_set_0x4) /*FIXME rename this variable*/
return;
b43legacy_write32(dev, B43legacy_MMIO_STATUS2_BITFIELD,
b43legacy_read32(dev, B43legacy_MMIO_STATUS2_BITFIELD)
| 0x4);
}
static void handle_irq_pmq(struct b43legacy_wldev *dev)
{
u32 tmp;
/* TODO: AP mode. */
while (1) {
tmp = b43legacy_read32(dev, B43legacy_MMIO_PS_STATUS);
if (!(tmp & 0x00000008))
break;
}
/* 16bit write is odd, but correct. */
b43legacy_write16(dev, B43legacy_MMIO_PS_STATUS, 0x0002);
}
static void b43legacy_write_template_common(struct b43legacy_wldev *dev,
const u8 *data, u16 size,
u16 ram_offset,
u16 shm_size_offset, u8 rate)
{
u32 i;
u32 tmp;
struct b43legacy_plcp_hdr4 plcp;
plcp.data = 0;
b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
b43legacy_ram_write(dev, ram_offset, le32_to_cpu(plcp.data));
ram_offset += sizeof(u32);
/* The PLCP is 6 bytes long, but we only wrote 4 bytes, yet.
* So leave the first two bytes of the next write blank.
*/
tmp = (u32)(data[0]) << 16;
tmp |= (u32)(data[1]) << 24;
b43legacy_ram_write(dev, ram_offset, tmp);
ram_offset += sizeof(u32);
for (i = 2; i < size; i += sizeof(u32)) {
tmp = (u32)(data[i + 0]);
if (i + 1 < size)
tmp |= (u32)(data[i + 1]) << 8;
if (i + 2 < size)
tmp |= (u32)(data[i + 2]) << 16;
if (i + 3 < size)
tmp |= (u32)(data[i + 3]) << 24;
b43legacy_ram_write(dev, ram_offset + i - 2, tmp);
}
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_size_offset,
size + sizeof(struct b43legacy_plcp_hdr6));
}
static void b43legacy_write_beacon_template(struct b43legacy_wldev *dev,
u16 ram_offset,
u16 shm_size_offset, u8 rate)
{
int len;
const u8 *data;
B43legacy_WARN_ON(!dev->cached_beacon);
len = min((size_t)dev->cached_beacon->len,
0x200 - sizeof(struct b43legacy_plcp_hdr6));
data = (const u8 *)(dev->cached_beacon->data);
b43legacy_write_template_common(dev, data,
len, ram_offset,
shm_size_offset, rate);
}
static void b43legacy_write_probe_resp_plcp(struct b43legacy_wldev *dev,
u16 shm_offset, u16 size,
u8 rate)
{
struct b43legacy_plcp_hdr4 plcp;
u32 tmp;
__le16 dur;
plcp.data = 0;
b43legacy_generate_plcp_hdr(&plcp, size + FCS_LEN, rate);
dur = ieee80211_generic_frame_duration(dev->wl->hw,
dev->wl->if_id,
size,
B43legacy_RATE_TO_100KBPS(rate));
/* Write PLCP in two parts and timing for packet transfer */
tmp = le32_to_cpu(plcp.data);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_offset,
tmp & 0xFFFF);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_offset + 2,
tmp >> 16);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, shm_offset + 6,
le16_to_cpu(dur));
}
/* Instead of using custom probe response template, this function
* just patches custom beacon template by:
* 1) Changing packet type
* 2) Patching duration field
* 3) Stripping TIM
*/
static u8 *b43legacy_generate_probe_resp(struct b43legacy_wldev *dev,
u16 *dest_size, u8 rate)
{
const u8 *src_data;
u8 *dest_data;
u16 src_size;
u16 elem_size;
u16 src_pos;
u16 dest_pos;
__le16 dur;
struct ieee80211_hdr *hdr;
B43legacy_WARN_ON(!dev->cached_beacon);
src_size = dev->cached_beacon->len;
src_data = (const u8 *)dev->cached_beacon->data;
if (unlikely(src_size < 0x24)) {
b43legacydbg(dev->wl, "b43legacy_generate_probe_resp: "
"invalid beacon\n");
return NULL;
}
dest_data = kmalloc(src_size, GFP_ATOMIC);
if (unlikely(!dest_data))
return NULL;
/* 0x24 is offset of first variable-len Information-Element
* in beacon frame.
*/
memcpy(dest_data, src_data, 0x24);
src_pos = 0x24;
dest_pos = 0x24;
for (; src_pos < src_size - 2; src_pos += elem_size) {
elem_size = src_data[src_pos + 1] + 2;
if (src_data[src_pos] != 0x05) { /* TIM */
memcpy(dest_data + dest_pos, src_data + src_pos,
elem_size);
dest_pos += elem_size;
}
}
*dest_size = dest_pos;
hdr = (struct ieee80211_hdr *)dest_data;
/* Set the frame control. */
hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_PROBE_RESP);
dur = ieee80211_generic_frame_duration(dev->wl->hw,
dev->wl->if_id,
*dest_size,
B43legacy_RATE_TO_100KBPS(rate));
hdr->duration_id = dur;
return dest_data;
}
static void b43legacy_write_probe_resp_template(struct b43legacy_wldev *dev,
u16 ram_offset,
u16 shm_size_offset, u8 rate)
{
u8 *probe_resp_data;
u16 size;
B43legacy_WARN_ON(!dev->cached_beacon);
size = dev->cached_beacon->len;
probe_resp_data = b43legacy_generate_probe_resp(dev, &size, rate);
if (unlikely(!probe_resp_data))
return;
/* Looks like PLCP headers plus packet timings are stored for
* all possible basic rates
*/
b43legacy_write_probe_resp_plcp(dev, 0x31A, size,
B43legacy_CCK_RATE_1MB);
b43legacy_write_probe_resp_plcp(dev, 0x32C, size,
B43legacy_CCK_RATE_2MB);
b43legacy_write_probe_resp_plcp(dev, 0x33E, size,
B43legacy_CCK_RATE_5MB);
b43legacy_write_probe_resp_plcp(dev, 0x350, size,
B43legacy_CCK_RATE_11MB);
size = min((size_t)size,
0x200 - sizeof(struct b43legacy_plcp_hdr6));
b43legacy_write_template_common(dev, probe_resp_data,
size, ram_offset,
shm_size_offset, rate);
kfree(probe_resp_data);
}
static int b43legacy_refresh_cached_beacon(struct b43legacy_wldev *dev,
struct sk_buff *beacon)
{
if (dev->cached_beacon)
kfree_skb(dev->cached_beacon);
dev->cached_beacon = beacon;
return 0;
}
static void b43legacy_update_templates(struct b43legacy_wldev *dev)
{
u32 status;
B43legacy_WARN_ON(!dev->cached_beacon);
b43legacy_write_beacon_template(dev, 0x68, 0x18,
B43legacy_CCK_RATE_1MB);
b43legacy_write_beacon_template(dev, 0x468, 0x1A,
B43legacy_CCK_RATE_1MB);
b43legacy_write_probe_resp_template(dev, 0x268, 0x4A,
B43legacy_CCK_RATE_11MB);
status = b43legacy_read32(dev, B43legacy_MMIO_STATUS2_BITFIELD);
status |= 0x03;
b43legacy_write32(dev, B43legacy_MMIO_STATUS2_BITFIELD, status);
}
static void b43legacy_refresh_templates(struct b43legacy_wldev *dev,
struct sk_buff *beacon)
{
int err;
err = b43legacy_refresh_cached_beacon(dev, beacon);
if (unlikely(err))
return;
b43legacy_update_templates(dev);
}
static void b43legacy_set_ssid(struct b43legacy_wldev *dev,
const u8 *ssid, u8 ssid_len)
{
u32 tmp;
u16 i;
u16 len;
len = min((u16)ssid_len, (u16)0x100);
for (i = 0; i < len; i += sizeof(u32)) {
tmp = (u32)(ssid[i + 0]);
if (i + 1 < len)
tmp |= (u32)(ssid[i + 1]) << 8;
if (i + 2 < len)
tmp |= (u32)(ssid[i + 2]) << 16;
if (i + 3 < len)
tmp |= (u32)(ssid[i + 3]) << 24;
b43legacy_shm_write32(dev, B43legacy_SHM_SHARED,
0x380 + i, tmp);
}
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
0x48, len);
}
static void b43legacy_set_beacon_int(struct b43legacy_wldev *dev,
u16 beacon_int)
{
b43legacy_time_lock(dev);
if (dev->dev->id.revision >= 3)
b43legacy_write32(dev, 0x188, (beacon_int << 16));
else {
b43legacy_write16(dev, 0x606, (beacon_int >> 6));
b43legacy_write16(dev, 0x610, beacon_int);
}
b43legacy_time_unlock(dev);
}
static void handle_irq_beacon(struct b43legacy_wldev *dev)
{
u32 status;
if (!b43legacy_is_mode(dev->wl, IEEE80211_IF_TYPE_AP))
return;
dev->irq_savedstate &= ~B43legacy_IRQ_BEACON;
status = b43legacy_read32(dev, B43legacy_MMIO_STATUS2_BITFIELD);
if (!dev->cached_beacon || ((status & 0x1) && (status & 0x2))) {
/* ACK beacon IRQ. */
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON,
B43legacy_IRQ_BEACON);
dev->irq_savedstate |= B43legacy_IRQ_BEACON;
if (dev->cached_beacon)
kfree_skb(dev->cached_beacon);
dev->cached_beacon = NULL;
return;
}
if (!(status & 0x1)) {
b43legacy_write_beacon_template(dev, 0x68, 0x18,
B43legacy_CCK_RATE_1MB);
status |= 0x1;
b43legacy_write32(dev, B43legacy_MMIO_STATUS2_BITFIELD,
status);
}
if (!(status & 0x2)) {
b43legacy_write_beacon_template(dev, 0x468, 0x1A,
B43legacy_CCK_RATE_1MB);
status |= 0x2;
b43legacy_write32(dev, B43legacy_MMIO_STATUS2_BITFIELD,
status);
}
}
static void handle_irq_ucode_debug(struct b43legacy_wldev *dev)
{
}
/* Interrupt handler bottom-half */
static void b43legacy_interrupt_tasklet(struct b43legacy_wldev *dev)
{
u32 reason;
u32 dma_reason[ARRAY_SIZE(dev->dma_reason)];
u32 merged_dma_reason = 0;
int i;
int activity = 0;
unsigned long flags;
spin_lock_irqsave(&dev->wl->irq_lock, flags);
B43legacy_WARN_ON(b43legacy_status(dev) <
B43legacy_STAT_INITIALIZED);
reason = dev->irq_reason;
for (i = 0; i < ARRAY_SIZE(dma_reason); i++) {
dma_reason[i] = dev->dma_reason[i];
merged_dma_reason |= dma_reason[i];
}
if (unlikely(reason & B43legacy_IRQ_MAC_TXERR))
b43legacyerr(dev->wl, "MAC transmission error\n");
if (unlikely(reason & B43legacy_IRQ_PHY_TXERR))
b43legacyerr(dev->wl, "PHY transmission error\n");
if (unlikely(merged_dma_reason & (B43legacy_DMAIRQ_FATALMASK |
B43legacy_DMAIRQ_NONFATALMASK))) {
if (merged_dma_reason & B43legacy_DMAIRQ_FATALMASK) {
b43legacyerr(dev->wl, "Fatal DMA error: "
"0x%08X, 0x%08X, 0x%08X, "
"0x%08X, 0x%08X, 0x%08X\n",
dma_reason[0], dma_reason[1],
dma_reason[2], dma_reason[3],
dma_reason[4], dma_reason[5]);
b43legacy_controller_restart(dev, "DMA error");
mmiowb();
spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
return;
}
if (merged_dma_reason & B43legacy_DMAIRQ_NONFATALMASK)
b43legacyerr(dev->wl, "DMA error: "
"0x%08X, 0x%08X, 0x%08X, "
"0x%08X, 0x%08X, 0x%08X\n",
dma_reason[0], dma_reason[1],
dma_reason[2], dma_reason[3],
dma_reason[4], dma_reason[5]);
}
if (unlikely(reason & B43legacy_IRQ_UCODE_DEBUG))
handle_irq_ucode_debug(dev);
if (reason & B43legacy_IRQ_TBTT_INDI)
handle_irq_tbtt_indication(dev);
if (reason & B43legacy_IRQ_ATIM_END)
handle_irq_atim_end(dev);
if (reason & B43legacy_IRQ_BEACON)
handle_irq_beacon(dev);
if (reason & B43legacy_IRQ_PMQ)
handle_irq_pmq(dev);
if (reason & B43legacy_IRQ_TXFIFO_FLUSH_OK)
;/*TODO*/
if (reason & B43legacy_IRQ_NOISESAMPLE_OK)
handle_irq_noise(dev);
/* Check the DMA reason registers for received data. */
if (dma_reason[0] & B43legacy_DMAIRQ_RX_DONE) {
if (b43legacy_using_pio(dev))
b43legacy_pio_rx(dev->pio.queue0);
else
b43legacy_dma_rx(dev->dma.rx_ring0);
/* We intentionally don't set "activity" to 1, here. */
}
B43legacy_WARN_ON(dma_reason[1] & B43legacy_DMAIRQ_RX_DONE);
B43legacy_WARN_ON(dma_reason[2] & B43legacy_DMAIRQ_RX_DONE);
if (dma_reason[3] & B43legacy_DMAIRQ_RX_DONE) {
if (b43legacy_using_pio(dev))
b43legacy_pio_rx(dev->pio.queue3);
else
b43legacy_dma_rx(dev->dma.rx_ring3);
activity = 1;
}
B43legacy_WARN_ON(dma_reason[4] & B43legacy_DMAIRQ_RX_DONE);
B43legacy_WARN_ON(dma_reason[5] & B43legacy_DMAIRQ_RX_DONE);
if (reason & B43legacy_IRQ_TX_OK) {
handle_irq_transmit_status(dev);
activity = 1;
/* TODO: In AP mode, this also causes sending of powersave
responses. */
}
if (!modparam_noleds)
b43legacy_leds_update(dev, activity);
b43legacy_interrupt_enable(dev, dev->irq_savedstate);
mmiowb();
spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
}
static void pio_irq_workaround(struct b43legacy_wldev *dev,
u16 base, int queueidx)
{
u16 rxctl;
rxctl = b43legacy_read16(dev, base + B43legacy_PIO_RXCTL);
if (rxctl & B43legacy_PIO_RXCTL_DATAAVAILABLE)
dev->dma_reason[queueidx] |= B43legacy_DMAIRQ_RX_DONE;
else
dev->dma_reason[queueidx] &= ~B43legacy_DMAIRQ_RX_DONE;
}
static void b43legacy_interrupt_ack(struct b43legacy_wldev *dev, u32 reason)
{
if (b43legacy_using_pio(dev) &&
(dev->dev->id.revision < 3) &&
(!(reason & B43legacy_IRQ_PIO_WORKAROUND))) {
/* Apply a PIO specific workaround to the dma_reasons */
pio_irq_workaround(dev, B43legacy_MMIO_PIO1_BASE, 0);
pio_irq_workaround(dev, B43legacy_MMIO_PIO2_BASE, 1);
pio_irq_workaround(dev, B43legacy_MMIO_PIO3_BASE, 2);
pio_irq_workaround(dev, B43legacy_MMIO_PIO4_BASE, 3);
}
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, reason);
b43legacy_write32(dev, B43legacy_MMIO_DMA0_REASON,
dev->dma_reason[0]);
b43legacy_write32(dev, B43legacy_MMIO_DMA1_REASON,
dev->dma_reason[1]);
b43legacy_write32(dev, B43legacy_MMIO_DMA2_REASON,
dev->dma_reason[2]);
b43legacy_write32(dev, B43legacy_MMIO_DMA3_REASON,
dev->dma_reason[3]);
b43legacy_write32(dev, B43legacy_MMIO_DMA4_REASON,
dev->dma_reason[4]);
b43legacy_write32(dev, B43legacy_MMIO_DMA5_REASON,
dev->dma_reason[5]);
}
/* Interrupt handler top-half */
static irqreturn_t b43legacy_interrupt_handler(int irq, void *dev_id)
{
irqreturn_t ret = IRQ_NONE;
struct b43legacy_wldev *dev = dev_id;
u32 reason;
if (!dev)
return IRQ_NONE;
spin_lock(&dev->wl->irq_lock);
if (b43legacy_status(dev) < B43legacy_STAT_STARTED)
goto out;
reason = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
if (reason == 0xffffffff) /* shared IRQ */
goto out;
ret = IRQ_HANDLED;
reason &= b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK);
if (!reason)
goto out;
dev->dma_reason[0] = b43legacy_read32(dev,
B43legacy_MMIO_DMA0_REASON)
& 0x0001DC00;
dev->dma_reason[1] = b43legacy_read32(dev,
B43legacy_MMIO_DMA1_REASON)
& 0x0000DC00;
dev->dma_reason[2] = b43legacy_read32(dev,
B43legacy_MMIO_DMA2_REASON)
& 0x0000DC00;
dev->dma_reason[3] = b43legacy_read32(dev,
B43legacy_MMIO_DMA3_REASON)
& 0x0001DC00;
dev->dma_reason[4] = b43legacy_read32(dev,
B43legacy_MMIO_DMA4_REASON)
& 0x0000DC00;
dev->dma_reason[5] = b43legacy_read32(dev,
B43legacy_MMIO_DMA5_REASON)
& 0x0000DC00;
b43legacy_interrupt_ack(dev, reason);
/* disable all IRQs. They are enabled again in the bottom half. */
dev->irq_savedstate = b43legacy_interrupt_disable(dev,
B43legacy_IRQ_ALL);
/* save the reason code and call our bottom half. */
dev->irq_reason = reason;
tasklet_schedule(&dev->isr_tasklet);
out:
mmiowb();
spin_unlock(&dev->wl->irq_lock);
return ret;
}
static void b43legacy_release_firmware(struct b43legacy_wldev *dev)
{
release_firmware(dev->fw.ucode);
dev->fw.ucode = NULL;
release_firmware(dev->fw.pcm);
dev->fw.pcm = NULL;
release_firmware(dev->fw.initvals);
dev->fw.initvals = NULL;
release_firmware(dev->fw.initvals_band);
dev->fw.initvals_band = NULL;
}
static void b43legacy_print_fw_helptext(struct b43legacy_wl *wl)
{
b43legacyerr(wl, "You must go to http://linuxwireless.org/en/users/"
"Drivers/bcm43xx#devicefirmware "
"and download the correct firmware (version 3).\n");
}
static int do_request_fw(struct b43legacy_wldev *dev,
const char *name,
const struct firmware **fw)
{
char path[sizeof(modparam_fwpostfix) + 32];
struct b43legacy_fw_header *hdr;
u32 size;
int err;
if (!name)
return 0;
snprintf(path, ARRAY_SIZE(path),
"b43legacy%s/%s.fw",
modparam_fwpostfix, name);
err = request_firmware(fw, path, dev->dev->dev);
if (err) {
b43legacyerr(dev->wl, "Firmware file \"%s\" not found "
"or load failed.\n", path);
return err;
}
if ((*fw)->size < sizeof(struct b43legacy_fw_header))
goto err_format;
hdr = (struct b43legacy_fw_header *)((*fw)->data);
switch (hdr->type) {
case B43legacy_FW_TYPE_UCODE:
case B43legacy_FW_TYPE_PCM:
size = be32_to_cpu(hdr->size);
if (size != (*fw)->size - sizeof(struct b43legacy_fw_header))
goto err_format;
/* fallthrough */
case B43legacy_FW_TYPE_IV:
if (hdr->ver != 1)
goto err_format;
break;
default:
goto err_format;
}
return err;
err_format:
b43legacyerr(dev->wl, "Firmware file \"%s\" format error.\n", path);
return -EPROTO;
}
static int b43legacy_request_firmware(struct b43legacy_wldev *dev)
{
struct b43legacy_firmware *fw = &dev->fw;
const u8 rev = dev->dev->id.revision;
const char *filename;
u32 tmshigh;
int err;
tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
if (!fw->ucode) {
if (rev == 2)
filename = "ucode2";
else if (rev == 4)
filename = "ucode4";
else
filename = "ucode5";
err = do_request_fw(dev, filename, &fw->ucode);
if (err)
goto err_load;
}
if (!fw->pcm) {
if (rev < 5)
filename = "pcm4";
else
filename = "pcm5";
err = do_request_fw(dev, filename, &fw->pcm);
if (err)
goto err_load;
}
if (!fw->initvals) {
switch (dev->phy.type) {
case B43legacy_PHYTYPE_G:
if ((rev >= 5) && (rev <= 10))
filename = "b0g0initvals5";
else if (rev == 2 || rev == 4)
filename = "b0g0initvals2";
else
goto err_no_initvals;
break;
default:
goto err_no_initvals;
}
err = do_request_fw(dev, filename, &fw->initvals);
if (err)
goto err_load;
}
if (!fw->initvals_band) {
switch (dev->phy.type) {
case B43legacy_PHYTYPE_G:
if ((rev >= 5) && (rev <= 10))
filename = "b0g0bsinitvals5";
else if (rev >= 11)
filename = NULL;
else if (rev == 2 || rev == 4)
filename = NULL;
else
goto err_no_initvals;
break;
default:
goto err_no_initvals;
}
err = do_request_fw(dev, filename, &fw->initvals_band);
if (err)
goto err_load;
}
return 0;
err_load:
b43legacy_print_fw_helptext(dev->wl);
goto error;
err_no_initvals:
err = -ENODEV;
b43legacyerr(dev->wl, "No Initial Values firmware file for PHY %u, "
"core rev %u\n", dev->phy.type, rev);
goto error;
error:
b43legacy_release_firmware(dev);
return err;
}
static int b43legacy_upload_microcode(struct b43legacy_wldev *dev)
{
const size_t hdr_len = sizeof(struct b43legacy_fw_header);
const __be32 *data;
unsigned int i;
unsigned int len;
u16 fwrev;
u16 fwpatch;
u16 fwdate;
u16 fwtime;
u32 tmp;
int err = 0;
/* Upload Microcode. */
data = (__be32 *) (dev->fw.ucode->data + hdr_len);
len = (dev->fw.ucode->size - hdr_len) / sizeof(__be32);
b43legacy_shm_control_word(dev,
B43legacy_SHM_UCODE |
B43legacy_SHM_AUTOINC_W,
0x0000);
for (i = 0; i < len; i++) {
b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA,
be32_to_cpu(data[i]));
udelay(10);
}
if (dev->fw.pcm) {
/* Upload PCM data. */
data = (__be32 *) (dev->fw.pcm->data + hdr_len);
len = (dev->fw.pcm->size - hdr_len) / sizeof(__be32);
b43legacy_shm_control_word(dev, B43legacy_SHM_HW, 0x01EA);
b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA, 0x00004000);
/* No need for autoinc bit in SHM_HW */
b43legacy_shm_control_word(dev, B43legacy_SHM_HW, 0x01EB);
for (i = 0; i < len; i++) {
b43legacy_write32(dev, B43legacy_MMIO_SHM_DATA,
be32_to_cpu(data[i]));
udelay(10);
}
}
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON,
B43legacy_IRQ_ALL);
b43legacy_write32(dev, B43legacy_MMIO_STATUS_BITFIELD, 0x00020402);
/* Wait for the microcode to load and respond */
i = 0;
while (1) {
tmp = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
if (tmp == B43legacy_IRQ_MAC_SUSPENDED)
break;
i++;
if (i >= B43legacy_IRQWAIT_MAX_RETRIES) {
b43legacyerr(dev->wl, "Microcode not responding\n");
b43legacy_print_fw_helptext(dev->wl);
err = -ENODEV;
goto out;
}
udelay(10);
}
/* dummy read follows */
b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
/* Get and check the revisions. */
fwrev = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_UCODEREV);
fwpatch = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_UCODEPATCH);
fwdate = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_UCODEDATE);
fwtime = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_UCODETIME);
if (fwrev > 0x128) {
b43legacyerr(dev->wl, "YOU ARE TRYING TO LOAD V4 FIRMWARE."
" Only firmware from binary drivers version 3.x"
" is supported. You must change your firmware"
" files.\n");
b43legacy_print_fw_helptext(dev->wl);
b43legacy_write32(dev, B43legacy_MMIO_STATUS_BITFIELD, 0);
err = -EOPNOTSUPP;
goto out;
}
b43legacydbg(dev->wl, "Loading firmware version 0x%X, patch level %u "
"(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n", fwrev, fwpatch,
(fwdate >> 12) & 0xF, (fwdate >> 8) & 0xF, fwdate & 0xFF,
(fwtime >> 11) & 0x1F, (fwtime >> 5) & 0x3F, fwtime & 0x1F);
dev->fw.rev = fwrev;
dev->fw.patch = fwpatch;
out:
return err;
}
static int b43legacy_write_initvals(struct b43legacy_wldev *dev,
const struct b43legacy_iv *ivals,
size_t count,
size_t array_size)
{
const struct b43legacy_iv *iv;
u16 offset;
size_t i;
bool bit32;
BUILD_BUG_ON(sizeof(struct b43legacy_iv) != 6);
iv = ivals;
for (i = 0; i < count; i++) {
if (array_size < sizeof(iv->offset_size))
goto err_format;
array_size -= sizeof(iv->offset_size);
offset = be16_to_cpu(iv->offset_size);
bit32 = !!(offset & B43legacy_IV_32BIT);
offset &= B43legacy_IV_OFFSET_MASK;
if (offset >= 0x1000)
goto err_format;
if (bit32) {
u32 value;
if (array_size < sizeof(iv->data.d32))
goto err_format;
array_size -= sizeof(iv->data.d32);
value = be32_to_cpu(get_unaligned(&iv->data.d32));
b43legacy_write32(dev, offset, value);
iv = (const struct b43legacy_iv *)((const uint8_t *)iv +
sizeof(__be16) +
sizeof(__be32));
} else {
u16 value;
if (array_size < sizeof(iv->data.d16))
goto err_format;
array_size -= sizeof(iv->data.d16);
value = be16_to_cpu(iv->data.d16);
b43legacy_write16(dev, offset, value);
iv = (const struct b43legacy_iv *)((const uint8_t *)iv +
sizeof(__be16) +
sizeof(__be16));
}
}
if (array_size)
goto err_format;
return 0;
err_format:
b43legacyerr(dev->wl, "Initial Values Firmware file-format error.\n");
b43legacy_print_fw_helptext(dev->wl);
return -EPROTO;
}
static int b43legacy_upload_initvals(struct b43legacy_wldev *dev)
{
const size_t hdr_len = sizeof(struct b43legacy_fw_header);
const struct b43legacy_fw_header *hdr;
struct b43legacy_firmware *fw = &dev->fw;
const struct b43legacy_iv *ivals;
size_t count;
int err;
hdr = (const struct b43legacy_fw_header *)(fw->initvals->data);
ivals = (const struct b43legacy_iv *)(fw->initvals->data + hdr_len);
count = be32_to_cpu(hdr->size);
err = b43legacy_write_initvals(dev, ivals, count,
fw->initvals->size - hdr_len);
if (err)
goto out;
if (fw->initvals_band) {
hdr = (const struct b43legacy_fw_header *)
(fw->initvals_band->data);
ivals = (const struct b43legacy_iv *)(fw->initvals_band->data
+ hdr_len);
count = be32_to_cpu(hdr->size);
err = b43legacy_write_initvals(dev, ivals, count,
fw->initvals_band->size - hdr_len);
if (err)
goto out;
}
out:
return err;
}
/* Initialize the GPIOs
* http://bcm-specs.sipsolutions.net/GPIO
*/
static int b43legacy_gpio_init(struct b43legacy_wldev *dev)
{
struct ssb_bus *bus = dev->dev->bus;
struct ssb_device *gpiodev, *pcidev = NULL;
u32 mask;
u32 set;
b43legacy_write32(dev, B43legacy_MMIO_STATUS_BITFIELD,
b43legacy_read32(dev,
B43legacy_MMIO_STATUS_BITFIELD)
& 0xFFFF3FFF);
b43legacy_leds_switch_all(dev, 0);
b43legacy_write16(dev, B43legacy_MMIO_GPIO_MASK,
b43legacy_read16(dev,
B43legacy_MMIO_GPIO_MASK)
| 0x000F);
mask = 0x0000001F;
set = 0x0000000F;
if (dev->dev->bus->chip_id == 0x4301) {
mask |= 0x0060;
set |= 0x0060;
}
if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_PACTRL) {
b43legacy_write16(dev, B43legacy_MMIO_GPIO_MASK,
b43legacy_read16(dev,
B43legacy_MMIO_GPIO_MASK)
| 0x0200);
mask |= 0x0200;
set |= 0x0200;
}
if (dev->dev->id.revision >= 2)
mask |= 0x0010; /* FIXME: This is redundant. */
#ifdef CONFIG_SSB_DRIVER_PCICORE
pcidev = bus->pcicore.dev;
#endif
gpiodev = bus->chipco.dev ? : pcidev;
if (!gpiodev)
return 0;
ssb_write32(gpiodev, B43legacy_GPIO_CONTROL,
(ssb_read32(gpiodev, B43legacy_GPIO_CONTROL)
& mask) | set);
return 0;
}
/* Turn off all GPIO stuff. Call this on module unload, for example. */
static void b43legacy_gpio_cleanup(struct b43legacy_wldev *dev)
{
struct ssb_bus *bus = dev->dev->bus;
struct ssb_device *gpiodev, *pcidev = NULL;
#ifdef CONFIG_SSB_DRIVER_PCICORE
pcidev = bus->pcicore.dev;
#endif
gpiodev = bus->chipco.dev ? : pcidev;
if (!gpiodev)
return;
ssb_write32(gpiodev, B43legacy_GPIO_CONTROL, 0);
}
/* http://bcm-specs.sipsolutions.net/EnableMac */
void b43legacy_mac_enable(struct b43legacy_wldev *dev)
{
dev->mac_suspended--;
B43legacy_WARN_ON(dev->mac_suspended < 0);
if (dev->mac_suspended == 0) {
b43legacy_write32(dev, B43legacy_MMIO_STATUS_BITFIELD,
b43legacy_read32(dev,
B43legacy_MMIO_STATUS_BITFIELD)
| B43legacy_SBF_MAC_ENABLED);
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON,
B43legacy_IRQ_MAC_SUSPENDED);
/* the next two are dummy reads */
b43legacy_read32(dev, B43legacy_MMIO_STATUS_BITFIELD);
b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
b43legacy_power_saving_ctl_bits(dev, -1, -1);
}
}
/* http://bcm-specs.sipsolutions.net/SuspendMAC */
void b43legacy_mac_suspend(struct b43legacy_wldev *dev)
{
int i;
u32 tmp;
B43legacy_WARN_ON(dev->mac_suspended < 0);
if (dev->mac_suspended == 0) {
b43legacy_power_saving_ctl_bits(dev, -1, 1);
b43legacy_write32(dev, B43legacy_MMIO_STATUS_BITFIELD,
b43legacy_read32(dev,
B43legacy_MMIO_STATUS_BITFIELD)
& ~B43legacy_SBF_MAC_ENABLED);
b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
for (i = 10000; i; i--) {
tmp = b43legacy_read32(dev,
B43legacy_MMIO_GEN_IRQ_REASON);
if (tmp & B43legacy_IRQ_MAC_SUSPENDED)
goto out;
udelay(1);
}
b43legacyerr(dev->wl, "MAC suspend failed\n");
}
out:
dev->mac_suspended++;
}
static void b43legacy_adjust_opmode(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
u32 ctl;
u16 cfp_pretbtt;
ctl = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
/* Reset status to STA infrastructure mode. */
ctl &= ~B43legacy_MACCTL_AP;
ctl &= ~B43legacy_MACCTL_KEEP_CTL;
ctl &= ~B43legacy_MACCTL_KEEP_BADPLCP;
ctl &= ~B43legacy_MACCTL_KEEP_BAD;
ctl &= ~B43legacy_MACCTL_PROMISC;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
ctl &= ~B43legacy_MACCTL_BEACPROMISC;
ctl |= B43legacy_MACCTL_INFRA;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (b43legacy_is_mode(wl, IEEE80211_IF_TYPE_AP))
ctl |= B43legacy_MACCTL_AP;
else if (b43legacy_is_mode(wl, IEEE80211_IF_TYPE_IBSS))
ctl &= ~B43legacy_MACCTL_INFRA;
if (wl->filter_flags & FIF_CONTROL)
ctl |= B43legacy_MACCTL_KEEP_CTL;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (wl->filter_flags & FIF_FCSFAIL)
ctl |= B43legacy_MACCTL_KEEP_BAD;
if (wl->filter_flags & FIF_PLCPFAIL)
ctl |= B43legacy_MACCTL_KEEP_BADPLCP;
if (wl->filter_flags & FIF_PROMISC_IN_BSS)
ctl |= B43legacy_MACCTL_PROMISC;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (wl->filter_flags & FIF_BCN_PRBRESP_PROMISC)
ctl |= B43legacy_MACCTL_BEACPROMISC;
/* Workaround: On old hardware the HW-MAC-address-filter
* doesn't work properly, so always run promisc in filter
* it in software. */
if (dev->dev->id.revision <= 4)
ctl |= B43legacy_MACCTL_PROMISC;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, ctl);
cfp_pretbtt = 2;
if ((ctl & B43legacy_MACCTL_INFRA) &&
!(ctl & B43legacy_MACCTL_AP)) {
if (dev->dev->bus->chip_id == 0x4306 &&
dev->dev->bus->chip_rev == 3)
cfp_pretbtt = 100;
else
cfp_pretbtt = 50;
}
b43legacy_write16(dev, 0x612, cfp_pretbtt);
}
static void b43legacy_rate_memory_write(struct b43legacy_wldev *dev,
u16 rate,
int is_ofdm)
{
u16 offset;
if (is_ofdm) {
offset = 0x480;
offset += (b43legacy_plcp_get_ratecode_ofdm(rate) & 0x000F) * 2;
} else {
offset = 0x4C0;
offset += (b43legacy_plcp_get_ratecode_cck(rate) & 0x000F) * 2;
}
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, offset + 0x20,
b43legacy_shm_read16(dev,
B43legacy_SHM_SHARED, offset));
}
static void b43legacy_rate_memory_init(struct b43legacy_wldev *dev)
{
switch (dev->phy.type) {
case B43legacy_PHYTYPE_G:
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_6MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_12MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_18MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_24MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_36MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_48MB, 1);
b43legacy_rate_memory_write(dev, B43legacy_OFDM_RATE_54MB, 1);
/* fallthrough */
case B43legacy_PHYTYPE_B:
b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_1MB, 0);
b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_2MB, 0);
b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_5MB, 0);
b43legacy_rate_memory_write(dev, B43legacy_CCK_RATE_11MB, 0);
break;
default:
B43legacy_BUG_ON(1);
}
}
/* Set the TX-Antenna for management frames sent by firmware. */
static void b43legacy_mgmtframe_txantenna(struct b43legacy_wldev *dev,
int antenna)
{
u16 ant = 0;
u16 tmp;
switch (antenna) {
case B43legacy_ANTENNA0:
ant |= B43legacy_TX4_PHY_ANT0;
break;
case B43legacy_ANTENNA1:
ant |= B43legacy_TX4_PHY_ANT1;
break;
case B43legacy_ANTENNA_AUTO:
ant |= B43legacy_TX4_PHY_ANTLAST;
break;
default:
B43legacy_BUG_ON(1);
}
/* FIXME We also need to set the other flags of the PHY control
* field somewhere. */
/* For Beacons */
tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_BEACPHYCTL);
tmp = (tmp & ~B43legacy_TX4_PHY_ANT) | ant;
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_BEACPHYCTL, tmp);
/* For ACK/CTS */
tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_ACKCTSPHYCTL);
tmp = (tmp & ~B43legacy_TX4_PHY_ANT) | ant;
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_ACKCTSPHYCTL, tmp);
/* For Probe Resposes */
tmp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_PRPHYCTL);
tmp = (tmp & ~B43legacy_TX4_PHY_ANT) | ant;
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_PRPHYCTL, tmp);
}
/* Returns TRUE, if the radio is enabled in hardware. */
static bool b43legacy_is_hw_radio_enabled(struct b43legacy_wldev *dev)
{
if (dev->phy.rev >= 3) {
if (!(b43legacy_read32(dev, B43legacy_MMIO_RADIO_HWENABLED_HI)
& B43legacy_MMIO_RADIO_HWENABLED_HI_MASK))
return 1;
} else {
if (b43legacy_read16(dev, B43legacy_MMIO_RADIO_HWENABLED_LO)
& B43legacy_MMIO_RADIO_HWENABLED_LO_MASK)
return 1;
}
return 0;
}
/* This is the opposite of b43legacy_chip_init() */
static void b43legacy_chip_exit(struct b43legacy_wldev *dev)
{
b43legacy_radio_turn_off(dev);
if (!modparam_noleds)
b43legacy_leds_exit(dev);
b43legacy_gpio_cleanup(dev);
/* firmware is released later */
}
/* Initialize the chip
* http://bcm-specs.sipsolutions.net/ChipInit
*/
static int b43legacy_chip_init(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
int err;
int tmp;
u32 value32;
u16 value16;
b43legacy_write32(dev, B43legacy_MMIO_STATUS_BITFIELD,
B43legacy_SBF_CORE_READY
| B43legacy_SBF_400);
err = b43legacy_request_firmware(dev);
if (err)
goto out;
err = b43legacy_upload_microcode(dev);
if (err)
goto out; /* firmware is released later */
err = b43legacy_gpio_init(dev);
if (err)
goto out; /* firmware is released later */
err = b43legacy_upload_initvals(dev);
if (err)
goto err_gpio_cleanup;
b43legacy_radio_turn_on(dev);
b43legacy_write16(dev, 0x03E6, 0x0000);
err = b43legacy_phy_init(dev);
if (err)
goto err_radio_off;
/* Select initial Interference Mitigation. */
tmp = phy->interfmode;
phy->interfmode = B43legacy_INTERFMODE_NONE;
b43legacy_radio_set_interference_mitigation(dev, tmp);
b43legacy_phy_set_antenna_diversity(dev);
b43legacy_mgmtframe_txantenna(dev, B43legacy_ANTENNA_DEFAULT);
if (phy->type == B43legacy_PHYTYPE_B) {
value16 = b43legacy_read16(dev, 0x005E);
value16 |= 0x0004;
b43legacy_write16(dev, 0x005E, value16);
}
b43legacy_write32(dev, 0x0100, 0x01000000);
if (dev->dev->id.revision < 5)
b43legacy_write32(dev, 0x010C, 0x01000000);
value32 = b43legacy_read32(dev, B43legacy_MMIO_STATUS_BITFIELD);
value32 &= ~B43legacy_SBF_MODE_NOTADHOC;
b43legacy_write32(dev, B43legacy_MMIO_STATUS_BITFIELD, value32);
value32 = b43legacy_read32(dev, B43legacy_MMIO_STATUS_BITFIELD);
value32 |= B43legacy_SBF_MODE_NOTADHOC;
b43legacy_write32(dev, B43legacy_MMIO_STATUS_BITFIELD, value32);
if (b43legacy_using_pio(dev)) {
b43legacy_write32(dev, 0x0210, 0x00000100);
b43legacy_write32(dev, 0x0230, 0x00000100);
b43legacy_write32(dev, 0x0250, 0x00000100);
b43legacy_write32(dev, 0x0270, 0x00000100);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0034,
0x0000);
}
/* Probe Response Timeout value */
/* FIXME: Default to 0, has to be set by ioctl probably... :-/ */
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0074, 0x0000);
/* Initially set the wireless operation mode. */
b43legacy_adjust_opmode(dev);
if (dev->dev->id.revision < 3) {
b43legacy_write16(dev, 0x060E, 0x0000);
b43legacy_write16(dev, 0x0610, 0x8000);
b43legacy_write16(dev, 0x0604, 0x0000);
b43legacy_write16(dev, 0x0606, 0x0200);
} else {
b43legacy_write32(dev, 0x0188, 0x80000000);
b43legacy_write32(dev, 0x018C, 0x02000000);
}
b43legacy_write32(dev, B43legacy_MMIO_GEN_IRQ_REASON, 0x00004000);
b43legacy_write32(dev, B43legacy_MMIO_DMA0_IRQ_MASK, 0x0001DC00);
b43legacy_write32(dev, B43legacy_MMIO_DMA1_IRQ_MASK, 0x0000DC00);
b43legacy_write32(dev, B43legacy_MMIO_DMA2_IRQ_MASK, 0x0000DC00);
b43legacy_write32(dev, B43legacy_MMIO_DMA3_IRQ_MASK, 0x0001DC00);
b43legacy_write32(dev, B43legacy_MMIO_DMA4_IRQ_MASK, 0x0000DC00);
b43legacy_write32(dev, B43legacy_MMIO_DMA5_IRQ_MASK, 0x0000DC00);
value32 = ssb_read32(dev->dev, SSB_TMSLOW);
value32 |= 0x00100000;
ssb_write32(dev->dev, SSB_TMSLOW, value32);
b43legacy_write16(dev, B43legacy_MMIO_POWERUP_DELAY,
dev->dev->bus->chipco.fast_pwrup_delay);
B43legacy_WARN_ON(err != 0);
b43legacydbg(dev->wl, "Chip initialized\n");
out:
return err;
err_radio_off:
b43legacy_radio_turn_off(dev);
err_gpio_cleanup:
b43legacy_gpio_cleanup(dev);
goto out;
}
static void b43legacy_periodic_every120sec(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
if (phy->type != B43legacy_PHYTYPE_G || phy->rev < 2)
return;
b43legacy_mac_suspend(dev);
b43legacy_phy_lo_g_measure(dev);
b43legacy_mac_enable(dev);
}
static void b43legacy_periodic_every60sec(struct b43legacy_wldev *dev)
{
b43legacy_phy_lo_mark_all_unused(dev);
if (dev->dev->bus->sprom.r1.boardflags_lo & B43legacy_BFL_RSSI) {
b43legacy_mac_suspend(dev);
b43legacy_calc_nrssi_slope(dev);
b43legacy_mac_enable(dev);
}
}
static void b43legacy_periodic_every30sec(struct b43legacy_wldev *dev)
{
/* Update device statistics. */
b43legacy_calculate_link_quality(dev);
}
static void b43legacy_periodic_every15sec(struct b43legacy_wldev *dev)
{
b43legacy_phy_xmitpower(dev); /* FIXME: unless scanning? */
}
static void b43legacy_periodic_every1sec(struct b43legacy_wldev *dev)
{
bool radio_hw_enable;
/* check if radio hardware enabled status changed */
radio_hw_enable = b43legacy_is_hw_radio_enabled(dev);
if (unlikely(dev->radio_hw_enable != radio_hw_enable)) {
dev->radio_hw_enable = radio_hw_enable;
b43legacyinfo(dev->wl, "Radio hardware status changed to %s\n",
(radio_hw_enable) ? "enabled" : "disabled");
b43legacy_leds_update(dev, 0);
}
}
static void do_periodic_work(struct b43legacy_wldev *dev)
{
unsigned int state;
state = dev->periodic_state;
if (state % 120 == 0)
b43legacy_periodic_every120sec(dev);
if (state % 60 == 0)
b43legacy_periodic_every60sec(dev);
if (state % 30 == 0)
b43legacy_periodic_every30sec(dev);
if (state % 15 == 0)
b43legacy_periodic_every15sec(dev);
b43legacy_periodic_every1sec(dev);
}
/* Estimate a "Badness" value based on the periodic work
* state-machine state. "Badness" is worse (bigger), if the
* periodic work will take longer.
*/
static int estimate_periodic_work_badness(unsigned int state)
{
int badness = 0;
if (state % 120 == 0) /* every 120 sec */
badness += 10;
if (state % 60 == 0) /* every 60 sec */
badness += 5;
if (state % 30 == 0) /* every 30 sec */
badness += 1;
if (state % 15 == 0) /* every 15 sec */
badness += 1;
#define BADNESS_LIMIT 4
return badness;
}
static void b43legacy_periodic_work_handler(struct work_struct *work)
{
struct b43legacy_wldev *dev =
container_of(work, struct b43legacy_wldev,
periodic_work.work);
unsigned long flags;
unsigned long delay;
u32 savedirqs = 0;
int badness;
mutex_lock(&dev->wl->mutex);
if (unlikely(b43legacy_status(dev) != B43legacy_STAT_STARTED))
goto out;
if (b43legacy_debug(dev, B43legacy_DBG_PWORK_STOP))
goto out_requeue;
badness = estimate_periodic_work_badness(dev->periodic_state);
if (badness > BADNESS_LIMIT) {
spin_lock_irqsave(&dev->wl->irq_lock, flags);
/* Suspend TX as we don't want to transmit packets while
* we recalibrate the hardware. */
b43legacy_tx_suspend(dev);
savedirqs = b43legacy_interrupt_disable(dev,
B43legacy_IRQ_ALL);
/* Periodic work will take a long time, so we want it to
* be preemtible and release the spinlock. */
spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
b43legacy_synchronize_irq(dev);
do_periodic_work(dev);
spin_lock_irqsave(&dev->wl->irq_lock, flags);
b43legacy_interrupt_enable(dev, savedirqs);
b43legacy_tx_resume(dev);
mmiowb();
spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
} else {
/* Take the global driver lock. This will lock any operation. */
spin_lock_irqsave(&dev->wl->irq_lock, flags);
do_periodic_work(dev);
mmiowb();
spin_unlock_irqrestore(&dev->wl->irq_lock, flags);
}
dev->periodic_state++;
out_requeue:
if (b43legacy_debug(dev, B43legacy_DBG_PWORK_FAST))
delay = msecs_to_jiffies(50);
else
delay = round_jiffies(HZ);
queue_delayed_work(dev->wl->hw->workqueue,
&dev->periodic_work, delay);
out:
mutex_unlock(&dev->wl->mutex);
}
static void b43legacy_periodic_tasks_setup(struct b43legacy_wldev *dev)
{
struct delayed_work *work = &dev->periodic_work;
dev->periodic_state = 0;
INIT_DELAYED_WORK(work, b43legacy_periodic_work_handler);
queue_delayed_work(dev->wl->hw->workqueue, work, 0);
}
/* Validate access to the chip (SHM) */
static int b43legacy_validate_chipaccess(struct b43legacy_wldev *dev)
{
u32 value;
u32 shm_backup;
shm_backup = b43legacy_shm_read32(dev, B43legacy_SHM_SHARED, 0);
b43legacy_shm_write32(dev, B43legacy_SHM_SHARED, 0, 0xAA5555AA);
if (b43legacy_shm_read32(dev, B43legacy_SHM_SHARED, 0) !=
0xAA5555AA)
goto error;
b43legacy_shm_write32(dev, B43legacy_SHM_SHARED, 0, 0x55AAAA55);
if (b43legacy_shm_read32(dev, B43legacy_SHM_SHARED, 0) !=
0x55AAAA55)
goto error;
b43legacy_shm_write32(dev, B43legacy_SHM_SHARED, 0, shm_backup);
value = b43legacy_read32(dev, B43legacy_MMIO_MACCTL);
if ((value | B43legacy_MACCTL_GMODE) !=
(B43legacy_MACCTL_GMODE | B43legacy_MACCTL_IHR_ENABLED))
goto error;
value = b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_REASON);
if (value)
goto error;
return 0;
error:
b43legacyerr(dev->wl, "Failed to validate the chipaccess\n");
return -ENODEV;
}
static void b43legacy_security_init(struct b43legacy_wldev *dev)
{
dev->max_nr_keys = (dev->dev->id.revision >= 5) ? 58 : 20;
B43legacy_WARN_ON(dev->max_nr_keys > ARRAY_SIZE(dev->key));
dev->ktp = b43legacy_shm_read16(dev, B43legacy_SHM_SHARED,
0x0056);
/* KTP is a word address, but we address SHM bytewise.
* So multiply by two.
*/
dev->ktp *= 2;
if (dev->dev->id.revision >= 5)
/* Number of RCMTA address slots */
b43legacy_write16(dev, B43legacy_MMIO_RCMTA_COUNT,
dev->max_nr_keys - 8);
}
static int b43legacy_rng_read(struct hwrng *rng, u32 *data)
{
struct b43legacy_wl *wl = (struct b43legacy_wl *)rng->priv;
unsigned long flags;
/* Don't take wl->mutex here, as it could deadlock with
* hwrng internal locking. It's not needed to take
* wl->mutex here, anyway. */
spin_lock_irqsave(&wl->irq_lock, flags);
*data = b43legacy_read16(wl->current_dev, B43legacy_MMIO_RNG);
spin_unlock_irqrestore(&wl->irq_lock, flags);
return (sizeof(u16));
}
static void b43legacy_rng_exit(struct b43legacy_wl *wl)
{
if (wl->rng_initialized)
hwrng_unregister(&wl->rng);
}
static int b43legacy_rng_init(struct b43legacy_wl *wl)
{
int err;
snprintf(wl->rng_name, ARRAY_SIZE(wl->rng_name),
"%s_%s", KBUILD_MODNAME, wiphy_name(wl->hw->wiphy));
wl->rng.name = wl->rng_name;
wl->rng.data_read = b43legacy_rng_read;
wl->rng.priv = (unsigned long)wl;
wl->rng_initialized = 1;
err = hwrng_register(&wl->rng);
if (err) {
wl->rng_initialized = 0;
b43legacyerr(wl, "Failed to register the random "
"number generator (%d)\n", err);
}
return err;
}
static int b43legacy_tx(struct ieee80211_hw *hw,
struct sk_buff *skb,
struct ieee80211_tx_control *ctl)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
int err = -ENODEV;
unsigned long flags;
if (unlikely(!dev))
goto out;
if (unlikely(b43legacy_status(dev) < B43legacy_STAT_STARTED))
goto out;
/* DMA-TX is done without a global lock. */
if (b43legacy_using_pio(dev)) {
spin_lock_irqsave(&wl->irq_lock, flags);
err = b43legacy_pio_tx(dev, skb, ctl);
spin_unlock_irqrestore(&wl->irq_lock, flags);
} else
err = b43legacy_dma_tx(dev, skb, ctl);
out:
if (unlikely(err))
return NETDEV_TX_BUSY;
return NETDEV_TX_OK;
}
static int b43legacy_conf_tx(struct ieee80211_hw *hw,
int queue,
const struct ieee80211_tx_queue_params *params)
{
return 0;
}
static int b43legacy_get_tx_stats(struct ieee80211_hw *hw,
struct ieee80211_tx_queue_stats *stats)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
unsigned long flags;
int err = -ENODEV;
if (!dev)
goto out;
spin_lock_irqsave(&wl->irq_lock, flags);
if (likely(b43legacy_status(dev) >= B43legacy_STAT_STARTED)) {
if (b43legacy_using_pio(dev))
b43legacy_pio_get_tx_stats(dev, stats);
else
b43legacy_dma_get_tx_stats(dev, stats);
err = 0;
}
spin_unlock_irqrestore(&wl->irq_lock, flags);
out:
return err;
}
static int b43legacy_get_stats(struct ieee80211_hw *hw,
struct ieee80211_low_level_stats *stats)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
unsigned long flags;
spin_lock_irqsave(&wl->irq_lock, flags);
memcpy(stats, &wl->ieee_stats, sizeof(*stats));
spin_unlock_irqrestore(&wl->irq_lock, flags);
return 0;
}
static const char *phymode_to_string(unsigned int phymode)
{
switch (phymode) {
case B43legacy_PHYMODE_B:
return "B";
case B43legacy_PHYMODE_G:
return "G";
default:
B43legacy_BUG_ON(1);
}
return "";
}
static int find_wldev_for_phymode(struct b43legacy_wl *wl,
unsigned int phymode,
struct b43legacy_wldev **dev,
bool *gmode)
{
struct b43legacy_wldev *d;
list_for_each_entry(d, &wl->devlist, list) {
if (d->phy.possible_phymodes & phymode) {
/* Ok, this device supports the PHY-mode.
* Set the gmode bit. */
*gmode = 1;
*dev = d;
return 0;
}
}
return -ESRCH;
}
static void b43legacy_put_phy_into_reset(struct b43legacy_wldev *dev)
{
struct ssb_device *sdev = dev->dev;
u32 tmslow;
tmslow = ssb_read32(sdev, SSB_TMSLOW);
tmslow &= ~B43legacy_TMSLOW_GMODE;
tmslow |= B43legacy_TMSLOW_PHYRESET;
tmslow |= SSB_TMSLOW_FGC;
ssb_write32(sdev, SSB_TMSLOW, tmslow);
msleep(1);
tmslow = ssb_read32(sdev, SSB_TMSLOW);
tmslow &= ~SSB_TMSLOW_FGC;
tmslow |= B43legacy_TMSLOW_PHYRESET;
ssb_write32(sdev, SSB_TMSLOW, tmslow);
msleep(1);
}
/* Expects wl->mutex locked */
static int b43legacy_switch_phymode(struct b43legacy_wl *wl,
unsigned int new_mode)
{
struct b43legacy_wldev *up_dev;
struct b43legacy_wldev *down_dev;
int err;
bool gmode = 0;
int prev_status;
err = find_wldev_for_phymode(wl, new_mode, &up_dev, &gmode);
if (err) {
b43legacyerr(wl, "Could not find a device for %s-PHY mode\n",
phymode_to_string(new_mode));
return err;
}
if ((up_dev == wl->current_dev) &&
(!!wl->current_dev->phy.gmode == !!gmode))
/* This device is already running. */
return 0;
b43legacydbg(wl, "Reconfiguring PHYmode to %s-PHY\n",
phymode_to_string(new_mode));
down_dev = wl->current_dev;
prev_status = b43legacy_status(down_dev);
/* Shutdown the currently running core. */
if (prev_status >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(down_dev);
if (prev_status >= B43legacy_STAT_INITIALIZED)
b43legacy_wireless_core_exit(down_dev);
if (down_dev != up_dev)
/* We switch to a different core, so we put PHY into
* RESET on the old core. */
b43legacy_put_phy_into_reset(down_dev);
/* Now start the new core. */
up_dev->phy.gmode = gmode;
if (prev_status >= B43legacy_STAT_INITIALIZED) {
err = b43legacy_wireless_core_init(up_dev);
if (err) {
b43legacyerr(wl, "Fatal: Could not initialize device"
" for newly selected %s-PHY mode\n",
phymode_to_string(new_mode));
goto init_failure;
}
}
if (prev_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(up_dev);
if (err) {
b43legacyerr(wl, "Fatal: Coult not start device for "
"newly selected %s-PHY mode\n",
phymode_to_string(new_mode));
b43legacy_wireless_core_exit(up_dev);
goto init_failure;
}
}
B43legacy_WARN_ON(b43legacy_status(up_dev) != prev_status);
b43legacy_shm_write32(up_dev, B43legacy_SHM_SHARED, 0x003E, 0);
wl->current_dev = up_dev;
return 0;
init_failure:
/* Whoops, failed to init the new core. No core is operating now. */
wl->current_dev = NULL;
return err;
}
static int b43legacy_antenna_from_ieee80211(u8 antenna)
{
switch (antenna) {
case 0: /* default/diversity */
return B43legacy_ANTENNA_DEFAULT;
case 1: /* Antenna 0 */
return B43legacy_ANTENNA0;
case 2: /* Antenna 1 */
return B43legacy_ANTENNA1;
default:
return B43legacy_ANTENNA_DEFAULT;
}
}
static int b43legacy_dev_config(struct ieee80211_hw *hw,
struct ieee80211_conf *conf)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev;
struct b43legacy_phy *phy;
unsigned long flags;
unsigned int new_phymode = 0xFFFF;
int antenna_tx;
int antenna_rx;
int err = 0;
u32 savedirqs;
antenna_tx = b43legacy_antenna_from_ieee80211(conf->antenna_sel_tx);
antenna_rx = b43legacy_antenna_from_ieee80211(conf->antenna_sel_rx);
mutex_lock(&wl->mutex);
/* Switch the PHY mode (if necessary). */
switch (conf->phymode) {
case MODE_IEEE80211B:
new_phymode = B43legacy_PHYMODE_B;
break;
case MODE_IEEE80211G:
new_phymode = B43legacy_PHYMODE_G;
break;
default:
B43legacy_WARN_ON(1);
}
err = b43legacy_switch_phymode(wl, new_phymode);
if (err)
goto out_unlock_mutex;
dev = wl->current_dev;
phy = &dev->phy;
/* Disable IRQs while reconfiguring the device.
* This makes it possible to drop the spinlock throughout
* the reconfiguration process. */
spin_lock_irqsave(&wl->irq_lock, flags);
if (b43legacy_status(dev) < B43legacy_STAT_STARTED) {
spin_unlock_irqrestore(&wl->irq_lock, flags);
goto out_unlock_mutex;
}
savedirqs = b43legacy_interrupt_disable(dev, B43legacy_IRQ_ALL);
spin_unlock_irqrestore(&wl->irq_lock, flags);
b43legacy_synchronize_irq(dev);
/* Switch to the requested channel.
* The firmware takes care of races with the TX handler. */
if (conf->channel_val != phy->channel)
b43legacy_radio_selectchannel(dev, conf->channel_val, 0);
/* Enable/Disable ShortSlot timing. */
if ((!!(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME))
!= dev->short_slot) {
B43legacy_WARN_ON(phy->type != B43legacy_PHYTYPE_G);
if (conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME)
b43legacy_short_slot_timing_enable(dev);
else
b43legacy_short_slot_timing_disable(dev);
}
/* Adjust the desired TX power level. */
if (conf->power_level != 0) {
if (conf->power_level != phy->power_level) {
phy->power_level = conf->power_level;
b43legacy_phy_xmitpower(dev);
}
}
/* Antennas for RX and management frame TX. */
b43legacy_mgmtframe_txantenna(dev, antenna_tx);
/* Update templates for AP mode. */
if (b43legacy_is_mode(wl, IEEE80211_IF_TYPE_AP))
b43legacy_set_beacon_int(dev, conf->beacon_int);
if (!!conf->radio_enabled != phy->radio_on) {
if (conf->radio_enabled) {
b43legacy_radio_turn_on(dev);
b43legacyinfo(dev->wl, "Radio turned on by software\n");
if (!dev->radio_hw_enable)
b43legacyinfo(dev->wl, "The hardware RF-kill"
" button still turns the radio"
" physically off. Press the"
" button to turn it on.\n");
} else {
b43legacy_radio_turn_off(dev);
b43legacyinfo(dev->wl, "Radio turned off by"
" software\n");
}
}
spin_lock_irqsave(&wl->irq_lock, flags);
b43legacy_interrupt_enable(dev, savedirqs);
mmiowb();
spin_unlock_irqrestore(&wl->irq_lock, flags);
out_unlock_mutex:
mutex_unlock(&wl->mutex);
return err;
}
static int b43legacy_dev_set_key(struct ieee80211_hw *hw,
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
enum set_key_cmd cmd,
const u8 *local_addr, const u8 *addr,
struct ieee80211_key_conf *key)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
unsigned long flags;
int err = -EOPNOTSUPP;
DECLARE_MAC_BUF(mac);
if (!dev)
return -ENODEV;
mutex_lock(&wl->mutex);
spin_lock_irqsave(&wl->irq_lock, flags);
if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) {
err = -ENODEV;
}
spin_unlock_irqrestore(&wl->irq_lock, flags);
mutex_unlock(&wl->mutex);
b43legacydbg(wl, "Using software based encryption for "
"mac: %s\n", print_mac(mac, addr));
return err;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
static void b43legacy_configure_filter(struct ieee80211_hw *hw,
unsigned int changed,
unsigned int *fflags,
int mc_count,
struct dev_addr_list *mc_list)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
unsigned long flags;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (!dev) {
*fflags = 0;
return;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
spin_lock_irqsave(&wl->irq_lock, flags);
*fflags &= FIF_PROMISC_IN_BSS |
FIF_ALLMULTI |
FIF_FCSFAIL |
FIF_PLCPFAIL |
FIF_CONTROL |
FIF_OTHER_BSS |
FIF_BCN_PRBRESP_PROMISC;
changed &= FIF_PROMISC_IN_BSS |
FIF_ALLMULTI |
FIF_FCSFAIL |
FIF_PLCPFAIL |
FIF_CONTROL |
FIF_OTHER_BSS |
FIF_BCN_PRBRESP_PROMISC;
wl->filter_flags = *fflags;
if (changed && b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED)
b43legacy_adjust_opmode(dev);
spin_unlock_irqrestore(&wl->irq_lock, flags);
}
static int b43legacy_config_interface(struct ieee80211_hw *hw,
int if_id,
struct ieee80211_if_conf *conf)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
unsigned long flags;
if (!dev)
return -ENODEV;
mutex_lock(&wl->mutex);
spin_lock_irqsave(&wl->irq_lock, flags);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
B43legacy_WARN_ON(wl->if_id != if_id);
if (conf->bssid)
memcpy(wl->bssid, conf->bssid, ETH_ALEN);
else
memset(wl->bssid, 0, ETH_ALEN);
if (b43legacy_status(dev) >= B43legacy_STAT_INITIALIZED) {
if (b43legacy_is_mode(wl, IEEE80211_IF_TYPE_AP)) {
B43legacy_WARN_ON(conf->type != IEEE80211_IF_TYPE_AP);
b43legacy_set_ssid(dev, conf->ssid, conf->ssid_len);
if (conf->beacon)
b43legacy_refresh_templates(dev, conf->beacon);
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
b43legacy_write_mac_bssid_templates(dev);
}
spin_unlock_irqrestore(&wl->irq_lock, flags);
mutex_unlock(&wl->mutex);
return 0;
}
/* Locking: wl->mutex */
static void b43legacy_wireless_core_stop(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
unsigned long flags;
if (b43legacy_status(dev) < B43legacy_STAT_STARTED)
return;
b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED);
mutex_unlock(&wl->mutex);
/* Must unlock as it would otherwise deadlock. No races here.
* Cancel the possibly running self-rearming periodic work. */
cancel_delayed_work_sync(&dev->periodic_work);
mutex_lock(&wl->mutex);
ieee80211_stop_queues(wl->hw); /* FIXME this could cause a deadlock */
/* Disable and sync interrupts. */
spin_lock_irqsave(&wl->irq_lock, flags);
dev->irq_savedstate = b43legacy_interrupt_disable(dev,
B43legacy_IRQ_ALL);
b43legacy_read32(dev, B43legacy_MMIO_GEN_IRQ_MASK); /* flush */
spin_unlock_irqrestore(&wl->irq_lock, flags);
b43legacy_synchronize_irq(dev);
b43legacy_mac_suspend(dev);
free_irq(dev->dev->irq, dev);
b43legacydbg(wl, "Wireless interface stopped\n");
}
/* Locking: wl->mutex */
static int b43legacy_wireless_core_start(struct b43legacy_wldev *dev)
{
int err;
B43legacy_WARN_ON(b43legacy_status(dev) != B43legacy_STAT_INITIALIZED);
drain_txstatus_queue(dev);
err = request_irq(dev->dev->irq, b43legacy_interrupt_handler,
IRQF_SHARED, KBUILD_MODNAME, dev);
if (err) {
b43legacyerr(dev->wl, "Cannot request IRQ-%d\n",
dev->dev->irq);
goto out;
}
/* We are ready to run. */
b43legacy_set_status(dev, B43legacy_STAT_STARTED);
/* Start data flow (TX/RX) */
b43legacy_mac_enable(dev);
b43legacy_interrupt_enable(dev, dev->irq_savedstate);
ieee80211_start_queues(dev->wl->hw);
/* Start maintenance work */
b43legacy_periodic_tasks_setup(dev);
b43legacydbg(dev->wl, "Wireless interface started\n");
out:
return err;
}
/* Get PHY and RADIO versioning numbers */
static int b43legacy_phy_versioning(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
u32 tmp;
u8 analog_type;
u8 phy_type;
u8 phy_rev;
u16 radio_manuf;
u16 radio_ver;
u16 radio_rev;
int unsupported = 0;
/* Get PHY versioning */
tmp = b43legacy_read16(dev, B43legacy_MMIO_PHY_VER);
analog_type = (tmp & B43legacy_PHYVER_ANALOG)
>> B43legacy_PHYVER_ANALOG_SHIFT;
phy_type = (tmp & B43legacy_PHYVER_TYPE) >> B43legacy_PHYVER_TYPE_SHIFT;
phy_rev = (tmp & B43legacy_PHYVER_VERSION);
switch (phy_type) {
case B43legacy_PHYTYPE_B:
if (phy_rev != 2 && phy_rev != 4
&& phy_rev != 6 && phy_rev != 7)
unsupported = 1;
break;
case B43legacy_PHYTYPE_G:
if (phy_rev > 8)
unsupported = 1;
break;
default:
unsupported = 1;
};
if (unsupported) {
b43legacyerr(dev->wl, "FOUND UNSUPPORTED PHY "
"(Analog %u, Type %u, Revision %u)\n",
analog_type, phy_type, phy_rev);
return -EOPNOTSUPP;
}
b43legacydbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
analog_type, phy_type, phy_rev);
/* Get RADIO versioning */
if (dev->dev->bus->chip_id == 0x4317) {
if (dev->dev->bus->chip_rev == 0)
tmp = 0x3205017F;
else if (dev->dev->bus->chip_rev == 1)
tmp = 0x4205017F;
else
tmp = 0x5205017F;
} else {
b43legacy_write16(dev, B43legacy_MMIO_RADIO_CONTROL,
B43legacy_RADIOCTL_ID);
tmp = b43legacy_read16(dev, B43legacy_MMIO_RADIO_DATA_HIGH);
tmp <<= 16;
b43legacy_write16(dev, B43legacy_MMIO_RADIO_CONTROL,
B43legacy_RADIOCTL_ID);
tmp |= b43legacy_read16(dev, B43legacy_MMIO_RADIO_DATA_LOW);
}
radio_manuf = (tmp & 0x00000FFF);
radio_ver = (tmp & 0x0FFFF000) >> 12;
radio_rev = (tmp & 0xF0000000) >> 28;
switch (phy_type) {
case B43legacy_PHYTYPE_B:
if ((radio_ver & 0xFFF0) != 0x2050)
unsupported = 1;
break;
case B43legacy_PHYTYPE_G:
if (radio_ver != 0x2050)
unsupported = 1;
break;
default:
B43legacy_BUG_ON(1);
}
if (unsupported) {
b43legacyerr(dev->wl, "FOUND UNSUPPORTED RADIO "
"(Manuf 0x%X, Version 0x%X, Revision %u)\n",
radio_manuf, radio_ver, radio_rev);
return -EOPNOTSUPP;
}
b43legacydbg(dev->wl, "Found Radio: Manuf 0x%X, Version 0x%X,"
" Revision %u\n", radio_manuf, radio_ver, radio_rev);
phy->radio_manuf = radio_manuf;
phy->radio_ver = radio_ver;
phy->radio_rev = radio_rev;
phy->analog = analog_type;
phy->type = phy_type;
phy->rev = phy_rev;
return 0;
}
static void setup_struct_phy_for_init(struct b43legacy_wldev *dev,
struct b43legacy_phy *phy)
{
struct b43legacy_lopair *lo;
int i;
memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
/* Flags */
phy->locked = 0;
/* Assume the radio is enabled. If it's not enabled, the state will
* immediately get fixed on the first periodic work run. */
dev->radio_hw_enable = 1;
phy->savedpctlreg = 0xFFFF;
phy->aci_enable = 0;
phy->aci_wlan_automatic = 0;
phy->aci_hw_rssi = 0;
lo = phy->_lo_pairs;
if (lo)
memset(lo, 0, sizeof(struct b43legacy_lopair) *
B43legacy_LO_COUNT);
phy->max_lb_gain = 0;
phy->trsw_rx_gain = 0;
/* Set default attenuation values. */
phy->bbatt = b43legacy_default_baseband_attenuation(dev);
phy->rfatt = b43legacy_default_radio_attenuation(dev);
phy->txctl1 = b43legacy_default_txctl1(dev);
phy->txpwr_offset = 0;
/* NRSSI */
phy->nrssislope = 0;
for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++)
phy->nrssi[i] = -1000;
for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++)
phy->nrssi_lt[i] = i;
phy->lofcal = 0xFFFF;
phy->initval = 0xFFFF;
spin_lock_init(&phy->lock);
phy->interfmode = B43legacy_INTERFMODE_NONE;
phy->channel = 0xFF;
}
static void setup_struct_wldev_for_init(struct b43legacy_wldev *dev)
{
/* Flags */
dev->reg124_set_0x4 = 0;
/* Stats */
memset(&dev->stats, 0, sizeof(dev->stats));
setup_struct_phy_for_init(dev, &dev->phy);
/* IRQ related flags */
dev->irq_reason = 0;
memset(dev->dma_reason, 0, sizeof(dev->dma_reason));
dev->irq_savedstate = B43legacy_IRQ_MASKTEMPLATE;
dev->mac_suspended = 1;
/* Noise calculation context */
memset(&dev->noisecalc, 0, sizeof(dev->noisecalc));
}
static void b43legacy_imcfglo_timeouts_workaround(struct b43legacy_wldev *dev)
{
#ifdef CONFIG_SSB_DRIVER_PCICORE
struct ssb_bus *bus = dev->dev->bus;
u32 tmp;
if (bus->pcicore.dev &&
bus->pcicore.dev->id.coreid == SSB_DEV_PCI &&
bus->pcicore.dev->id.revision <= 5) {
/* IMCFGLO timeouts workaround. */
tmp = ssb_read32(dev->dev, SSB_IMCFGLO);
tmp &= ~SSB_IMCFGLO_REQTO;
tmp &= ~SSB_IMCFGLO_SERTO;
switch (bus->bustype) {
case SSB_BUSTYPE_PCI:
case SSB_BUSTYPE_PCMCIA:
tmp |= 0x32;
break;
case SSB_BUSTYPE_SSB:
tmp |= 0x53;
break;
}
ssb_write32(dev->dev, SSB_IMCFGLO, tmp);
}
#endif /* CONFIG_SSB_DRIVER_PCICORE */
}
/* Shutdown a wireless core */
/* Locking: wl->mutex */
static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
struct b43legacy_phy *phy = &dev->phy;
B43legacy_WARN_ON(b43legacy_status(dev) > B43legacy_STAT_INITIALIZED);
if (b43legacy_status(dev) != B43legacy_STAT_INITIALIZED)
return;
b43legacy_set_status(dev, B43legacy_STAT_UNINIT);
mutex_unlock(&wl->mutex);
/* Must unlock as it would otherwise deadlock. No races here.
* Cancel possibly pending workqueues. */
cancel_work_sync(&dev->restart_work);
mutex_lock(&wl->mutex);
b43legacy_rng_exit(dev->wl);
b43legacy_pio_free(dev);
b43legacy_dma_free(dev);
b43legacy_chip_exit(dev);
b43legacy_radio_turn_off(dev);
b43legacy_switch_analog(dev, 0);
if (phy->dyn_tssi_tbl)
kfree(phy->tssi2dbm);
kfree(phy->lo_control);
phy->lo_control = NULL;
ssb_device_disable(dev->dev, 0);
ssb_bus_may_powerdown(dev->dev->bus);
}
static void prepare_phy_data_for_init(struct b43legacy_wldev *dev)
{
struct b43legacy_phy *phy = &dev->phy;
int i;
/* Set default attenuation values. */
phy->bbatt = b43legacy_default_baseband_attenuation(dev);
phy->rfatt = b43legacy_default_radio_attenuation(dev);
phy->txctl1 = b43legacy_default_txctl1(dev);
phy->txctl2 = 0xFFFF;
phy->txpwr_offset = 0;
/* NRSSI */
phy->nrssislope = 0;
for (i = 0; i < ARRAY_SIZE(phy->nrssi); i++)
phy->nrssi[i] = -1000;
for (i = 0; i < ARRAY_SIZE(phy->nrssi_lt); i++)
phy->nrssi_lt[i] = i;
phy->lofcal = 0xFFFF;
phy->initval = 0xFFFF;
phy->aci_enable = 0;
phy->aci_wlan_automatic = 0;
phy->aci_hw_rssi = 0;
phy->antenna_diversity = 0xFFFF;
memset(phy->minlowsig, 0xFF, sizeof(phy->minlowsig));
memset(phy->minlowsigpos, 0, sizeof(phy->minlowsigpos));
/* Flags */
phy->calibrated = 0;
phy->locked = 0;
if (phy->_lo_pairs)
memset(phy->_lo_pairs, 0,
sizeof(struct b43legacy_lopair) * B43legacy_LO_COUNT);
memset(phy->loopback_gain, 0, sizeof(phy->loopback_gain));
}
/* Initialize a wireless core */
static int b43legacy_wireless_core_init(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
struct ssb_bus *bus = dev->dev->bus;
struct b43legacy_phy *phy = &dev->phy;
struct ssb_sprom *sprom = &dev->dev->bus->sprom;
int err;
u32 hf;
u32 tmp;
B43legacy_WARN_ON(b43legacy_status(dev) != B43legacy_STAT_UNINIT);
err = ssb_bus_powerup(bus, 0);
if (err)
goto out;
if (!ssb_device_is_enabled(dev->dev)) {
tmp = phy->gmode ? B43legacy_TMSLOW_GMODE : 0;
b43legacy_wireless_core_reset(dev, tmp);
}
if ((phy->type == B43legacy_PHYTYPE_B) ||
(phy->type == B43legacy_PHYTYPE_G)) {
phy->_lo_pairs = kzalloc(sizeof(struct b43legacy_lopair)
* B43legacy_LO_COUNT,
GFP_KERNEL);
if (!phy->_lo_pairs)
return -ENOMEM;
}
setup_struct_wldev_for_init(dev);
err = b43legacy_phy_init_tssi2dbm_table(dev);
if (err)
goto err_kfree_lo_control;
/* Enable IRQ routing to this device. */
ssb_pcicore_dev_irqvecs_enable(&bus->pcicore, dev->dev);
b43legacy_imcfglo_timeouts_workaround(dev);
prepare_phy_data_for_init(dev);
b43legacy_phy_calibrate(dev);
err = b43legacy_chip_init(dev);
if (err)
goto err_kfree_tssitbl;
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_WLCOREREV,
dev->dev->id.revision);
hf = b43legacy_hf_read(dev);
if (phy->type == B43legacy_PHYTYPE_G) {
hf |= B43legacy_HF_SYMW;
if (phy->rev == 1)
hf |= B43legacy_HF_GDCW;
if (sprom->r1.boardflags_lo & B43legacy_BFL_PACTRL)
hf |= B43legacy_HF_OFDMPABOOST;
} else if (phy->type == B43legacy_PHYTYPE_B) {
hf |= B43legacy_HF_SYMW;
if (phy->rev >= 2 && phy->radio_ver == 0x2050)
hf &= ~B43legacy_HF_GDCW;
}
b43legacy_hf_write(dev, hf);
/* Short/Long Retry Limit.
* The retry-limit is a 4-bit counter. Enforce this to avoid overflowing
* the chip-internal counter.
*/
tmp = limit_value(modparam_short_retry, 0, 0xF);
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS,
0x0006, tmp);
tmp = limit_value(modparam_long_retry, 0, 0xF);
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS,
0x0007, tmp);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
0x0044, 3);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
0x0046, 2);
/* Disable sending probe responses from firmware.
* Setting the MaxTime to one usec will always trigger
* a timeout, so we never send any probe resp.
* A timeout of zero is infinite. */
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED,
B43legacy_SHM_SH_PRMAXTIME, 1);
b43legacy_rate_memory_init(dev);
/* Minimum Contention Window */
if (phy->type == B43legacy_PHYTYPE_B)
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS,
0x0003, 31);
else
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS,
0x0003, 15);
/* Maximum Contention Window */
b43legacy_shm_write16(dev, B43legacy_SHM_WIRELESS,
0x0004, 1023);
do {
if (b43legacy_using_pio(dev))
err = b43legacy_pio_init(dev);
else {
err = b43legacy_dma_init(dev);
if (!err)
b43legacy_qos_init(dev);
}
} while (err == -EAGAIN);
if (err)
goto err_chip_exit;
b43legacy_write16(dev, 0x0612, 0x0050);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0416, 0x0050);
b43legacy_shm_write16(dev, B43legacy_SHM_SHARED, 0x0414, 0x01F4);
ssb_bus_powerup(bus, 1); /* Enable dynamic PCTL */
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
memset(wl->bssid, 0, ETH_ALEN);
memset(wl->mac_addr, 0, ETH_ALEN);
b43legacy_upload_card_macaddress(dev);
b43legacy_security_init(dev);
b43legacy_rng_init(wl);
b43legacy_set_status(dev, B43legacy_STAT_INITIALIZED);
out:
return err;
err_chip_exit:
b43legacy_chip_exit(dev);
err_kfree_tssitbl:
if (phy->dyn_tssi_tbl)
kfree(phy->tssi2dbm);
err_kfree_lo_control:
kfree(phy->lo_control);
phy->lo_control = NULL;
ssb_bus_may_powerdown(bus);
B43legacy_WARN_ON(b43legacy_status(dev) != B43legacy_STAT_UNINIT);
return err;
}
static int b43legacy_add_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev;
unsigned long flags;
int err = -EOPNOTSUPP;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
/* TODO: allow WDS/AP devices to coexist */
if (conf->type != IEEE80211_IF_TYPE_AP &&
conf->type != IEEE80211_IF_TYPE_STA &&
conf->type != IEEE80211_IF_TYPE_WDS &&
conf->type != IEEE80211_IF_TYPE_IBSS)
return -EOPNOTSUPP;
mutex_lock(&wl->mutex);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (wl->operating)
goto out_mutex_unlock;
b43legacydbg(wl, "Adding Interface type %d\n", conf->type);
dev = wl->current_dev;
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
wl->operating = 1;
wl->if_id = conf->if_id;
wl->if_type = conf->type;
memcpy(wl->mac_addr, conf->mac_addr, ETH_ALEN);
spin_lock_irqsave(&wl->irq_lock, flags);
b43legacy_adjust_opmode(dev);
b43legacy_upload_card_macaddress(dev);
spin_unlock_irqrestore(&wl->irq_lock, flags);
err = 0;
out_mutex_unlock:
mutex_unlock(&wl->mutex);
return err;
}
static void b43legacy_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
unsigned long flags;
b43legacydbg(wl, "Removing Interface type %d\n", conf->type);
mutex_lock(&wl->mutex);
B43legacy_WARN_ON(!wl->operating);
B43legacy_WARN_ON(wl->if_id != conf->if_id);
wl->operating = 0;
spin_lock_irqsave(&wl->irq_lock, flags);
b43legacy_adjust_opmode(dev);
memset(wl->mac_addr, 0, ETH_ALEN);
b43legacy_upload_card_macaddress(dev);
spin_unlock_irqrestore(&wl->irq_lock, flags);
mutex_unlock(&wl->mutex);
}
static int b43legacy_start(struct ieee80211_hw *hw)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
struct b43legacy_wldev *dev = wl->current_dev;
int did_init = 0;
int err;
mutex_lock(&wl->mutex);
if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED) {
err = b43legacy_wireless_core_init(dev);
if (err)
goto out_mutex_unlock;
did_init = 1;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (b43legacy_status(dev) < B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(dev);
if (err) {
if (did_init)
b43legacy_wireless_core_exit(dev);
goto out_mutex_unlock;
}
}
out_mutex_unlock:
mutex_unlock(&wl->mutex);
return err;
}
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
void b43legacy_stop(struct ieee80211_hw *hw)
{
struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
struct b43legacy_wldev *dev = wl->current_dev;
mutex_lock(&wl->mutex);
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
if (b43legacy_status(dev) >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(dev);
b43legacy_wireless_core_exit(dev);
mutex_unlock(&wl->mutex);
}
static const struct ieee80211_ops b43legacy_hw_ops = {
.tx = b43legacy_tx,
.conf_tx = b43legacy_conf_tx,
.add_interface = b43legacy_add_interface,
.remove_interface = b43legacy_remove_interface,
.config = b43legacy_dev_config,
.config_interface = b43legacy_config_interface,
.set_key = b43legacy_dev_set_key,
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
.configure_filter = b43legacy_configure_filter,
.get_stats = b43legacy_get_stats,
.get_tx_stats = b43legacy_get_tx_stats,
[PATCH] mac80211: revamp interface and filter configuration Drivers are currently supposed to keep track of monitor interfaces if they allow so-called "hard" monitor, and they are also supposed to keep track of multicast etc. This patch changes that, replaces the set_multicast_list() callback with a new configure_filter() callback that takes filter flags (FIF_*) instead of interface flags (IFF_*). For a driver, this means it should open the filter as much as necessary to get all frames requested by the filter flags. Accordingly, the filter flags are named "positively", e.g. FIF_ALLMULTI. Multicast filtering is a bit special in that drivers that have no multicast address filters need to allow multicast frames through when either the FIF_ALLMULTI flag is set or when the mc_count value is positive. At the same time, drivers are no longer notified about monitor interfaces at all, this means they now need to implement the start() and stop() callbacks and the new change_filter_flags() callback. Also, the start()/stop() ordering changed, start() is now called *before* any add_interface() as it really should be, and stop() after any remove_interface(). The patch also changes the behaviour of setting the bssid to multicast for scanning when IEEE80211_HW_NO_PROBE_FILTERING is set; the IEEE80211_HW_NO_PROBE_FILTERING flag is removed and the filter flag FIF_BCN_PRBRESP_PROMISC introduced. This is a lot more efficient for hardware like b43 that supports it and other hardware can still set the BSSID to all-ones. Driver modifications by Johannes Berg (b43 & iwlwifi), Michael Wu (rtl8187, adm8211, and p54), Larry Finger (b43legacy), and Ivo van Doorn (rt2x00). Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-09-17 05:29:23 +00:00
.start = b43legacy_start,
.stop = b43legacy_stop,
};
/* Hard-reset the chip. Do not call this directly.
* Use b43legacy_controller_restart()
*/
static void b43legacy_chip_reset(struct work_struct *work)
{
struct b43legacy_wldev *dev =
container_of(work, struct b43legacy_wldev, restart_work);
struct b43legacy_wl *wl = dev->wl;
int err = 0;
int prev_status;
mutex_lock(&wl->mutex);
prev_status = b43legacy_status(dev);
/* Bring the device down... */
if (prev_status >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(dev);
if (prev_status >= B43legacy_STAT_INITIALIZED)
b43legacy_wireless_core_exit(dev);
/* ...and up again. */
if (prev_status >= B43legacy_STAT_INITIALIZED) {
err = b43legacy_wireless_core_init(dev);
if (err)
goto out;
}
if (prev_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(dev);
if (err) {
b43legacy_wireless_core_exit(dev);
goto out;
}
}
out:
mutex_unlock(&wl->mutex);
if (err)
b43legacyerr(wl, "Controller restart FAILED\n");
else
b43legacyinfo(wl, "Controller restarted\n");
}
static int b43legacy_setup_modes(struct b43legacy_wldev *dev,
int have_bphy,
int have_gphy)
{
struct ieee80211_hw *hw = dev->wl->hw;
struct ieee80211_hw_mode *mode;
struct b43legacy_phy *phy = &dev->phy;
int cnt = 0;
int err;
phy->possible_phymodes = 0;
for (; 1; cnt++) {
if (have_bphy) {
B43legacy_WARN_ON(cnt >= B43legacy_MAX_PHYHWMODES);
mode = &phy->hwmodes[cnt];
mode->mode = MODE_IEEE80211B;
mode->num_channels = b43legacy_bg_chantable_size;
mode->channels = b43legacy_bg_chantable;
mode->num_rates = b43legacy_b_ratetable_size;
mode->rates = b43legacy_b_ratetable;
err = ieee80211_register_hwmode(hw, mode);
if (err)
return err;
phy->possible_phymodes |= B43legacy_PHYMODE_B;
have_bphy = 0;
continue;
}
if (have_gphy) {
B43legacy_WARN_ON(cnt >= B43legacy_MAX_PHYHWMODES);
mode = &phy->hwmodes[cnt];
mode->mode = MODE_IEEE80211G;
mode->num_channels = b43legacy_bg_chantable_size;
mode->channels = b43legacy_bg_chantable;
mode->num_rates = b43legacy_g_ratetable_size;
mode->rates = b43legacy_g_ratetable;
err = ieee80211_register_hwmode(hw, mode);
if (err)
return err;
phy->possible_phymodes |= B43legacy_PHYMODE_G;
have_gphy = 0;
continue;
}
break;
}
return 0;
}
static void b43legacy_wireless_core_detach(struct b43legacy_wldev *dev)
{
/* We release firmware that late to not be required to re-request
* is all the time when we reinit the core. */
b43legacy_release_firmware(dev);
}
static int b43legacy_wireless_core_attach(struct b43legacy_wldev *dev)
{
struct b43legacy_wl *wl = dev->wl;
struct ssb_bus *bus = dev->dev->bus;
struct pci_dev *pdev = bus->host_pci;
int err;
int have_bphy = 0;
int have_gphy = 0;
u32 tmp;
/* Do NOT do any device initialization here.
* Do it in wireless_core_init() instead.
* This function is for gathering basic information about the HW, only.
* Also some structs may be set up here. But most likely you want to
* have that in core_init(), too.
*/
err = ssb_bus_powerup(bus, 0);
if (err) {
b43legacyerr(wl, "Bus powerup failed\n");
goto out;
}
/* Get the PHY type. */
if (dev->dev->id.revision >= 5) {
u32 tmshigh;
tmshigh = ssb_read32(dev->dev, SSB_TMSHIGH);
have_gphy = !!(tmshigh & B43legacy_TMSHIGH_GPHY);
if (!have_gphy)
have_bphy = 1;
} else if (dev->dev->id.revision == 4)
have_gphy = 1;
else
have_bphy = 1;
/* Initialize LEDs structs. */
err = b43legacy_leds_init(dev);
if (err)
goto err_powerdown;
dev->phy.gmode = (have_gphy || have_bphy);
tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
b43legacy_wireless_core_reset(dev, tmp);
err = b43legacy_phy_versioning(dev);
if (err)
goto err_leds_exit;
/* Check if this device supports multiband. */
if (!pdev ||
(pdev->device != 0x4312 &&
pdev->device != 0x4319 &&
pdev->device != 0x4324)) {
/* No multiband support. */
have_bphy = 0;
have_gphy = 0;
switch (dev->phy.type) {
case B43legacy_PHYTYPE_B:
have_bphy = 1;
break;
case B43legacy_PHYTYPE_G:
have_gphy = 1;
break;
default:
B43legacy_BUG_ON(1);
}
}
dev->phy.gmode = (have_gphy || have_bphy);
tmp = dev->phy.gmode ? B43legacy_TMSLOW_GMODE : 0;
b43legacy_wireless_core_reset(dev, tmp);
err = b43legacy_validate_chipaccess(dev);
if (err)
goto err_leds_exit;
err = b43legacy_setup_modes(dev, have_bphy, have_gphy);
if (err)
goto err_leds_exit;
/* Now set some default "current_dev" */
if (!wl->current_dev)
wl->current_dev = dev;
INIT_WORK(&dev->restart_work, b43legacy_chip_reset);
b43legacy_radio_turn_off(dev);
b43legacy_switch_analog(dev, 0);
ssb_device_disable(dev->dev, 0);
ssb_bus_may_powerdown(bus);
out:
return err;
err_leds_exit:
b43legacy_leds_exit(dev);
err_powerdown:
ssb_bus_may_powerdown(bus);
return err;
}
static void b43legacy_one_core_detach(struct ssb_device *dev)
{
struct b43legacy_wldev *wldev;
struct b43legacy_wl *wl;
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
cancel_work_sync(&wldev->restart_work);
b43legacy_debugfs_remove_device(wldev);
b43legacy_wireless_core_detach(wldev);
list_del(&wldev->list);
wl->nr_devs--;
ssb_set_drvdata(dev, NULL);
kfree(wldev);
}
static int b43legacy_one_core_attach(struct ssb_device *dev,
struct b43legacy_wl *wl)
{
struct b43legacy_wldev *wldev;
struct pci_dev *pdev;
int err = -ENOMEM;
if (!list_empty(&wl->devlist)) {
/* We are not the first core on this chip. */
pdev = dev->bus->host_pci;
/* Only special chips support more than one wireless
* core, although some of the other chips have more than
* one wireless core as well. Check for this and
* bail out early.
*/
if (!pdev ||
((pdev->device != 0x4321) &&
(pdev->device != 0x4313) &&
(pdev->device != 0x431A))) {
b43legacydbg(wl, "Ignoring unconnected 802.11 core\n");
return -ENODEV;
}
}
wldev = kzalloc(sizeof(*wldev), GFP_KERNEL);
if (!wldev)
goto out;
wldev->dev = dev;
wldev->wl = wl;
b43legacy_set_status(wldev, B43legacy_STAT_UNINIT);
wldev->bad_frames_preempt = modparam_bad_frames_preempt;
tasklet_init(&wldev->isr_tasklet,
(void (*)(unsigned long))b43legacy_interrupt_tasklet,
(unsigned long)wldev);
if (modparam_pio)
wldev->__using_pio = 1;
INIT_LIST_HEAD(&wldev->list);
err = b43legacy_wireless_core_attach(wldev);
if (err)
goto err_kfree_wldev;
list_add(&wldev->list, &wl->devlist);
wl->nr_devs++;
ssb_set_drvdata(dev, wldev);
b43legacy_debugfs_add_device(wldev);
out:
return err;
err_kfree_wldev:
kfree(wldev);
return err;
}
static void b43legacy_sprom_fixup(struct ssb_bus *bus)
{
/* boardflags workarounds */
if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
bus->boardinfo.type == 0x4E &&
bus->boardinfo.rev > 0x40)
bus->sprom.r1.boardflags_lo |= B43legacy_BFL_PACTRL;
/* Convert Antennagain values to Q5.2 */
if (bus->sprom.r1.antenna_gain_bg == 0xFF)
bus->sprom.r1.antenna_gain_bg = 2; /* if unset, use 2 dBm */
bus->sprom.r1.antenna_gain_bg <<= 2;
}
static void b43legacy_wireless_exit(struct ssb_device *dev,
struct b43legacy_wl *wl)
{
struct ieee80211_hw *hw = wl->hw;
ssb_set_devtypedata(dev, NULL);
ieee80211_free_hw(hw);
}
static int b43legacy_wireless_init(struct ssb_device *dev)
{
struct ssb_sprom *sprom = &dev->bus->sprom;
struct ieee80211_hw *hw;
struct b43legacy_wl *wl;
int err = -ENOMEM;
b43legacy_sprom_fixup(dev->bus);
hw = ieee80211_alloc_hw(sizeof(*wl), &b43legacy_hw_ops);
if (!hw) {
b43legacyerr(NULL, "Could not allocate ieee80211 device\n");
goto out;
}
/* fill hw info */
hw->flags = IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
IEEE80211_HW_RX_INCLUDES_FCS;
hw->max_signal = 100;
hw->max_rssi = -110;
hw->max_noise = -110;
hw->queues = 1; /* FIXME: hardware has more queues */
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->r1.et1mac))
SET_IEEE80211_PERM_ADDR(hw, sprom->r1.et1mac);
else
SET_IEEE80211_PERM_ADDR(hw, sprom->r1.il0mac);
/* Get and initialize struct b43legacy_wl */
wl = hw_to_b43legacy_wl(hw);
memset(wl, 0, sizeof(*wl));
wl->hw = hw;
spin_lock_init(&wl->irq_lock);
spin_lock_init(&wl->leds_lock);
mutex_init(&wl->mutex);
INIT_LIST_HEAD(&wl->devlist);
ssb_set_devtypedata(dev, wl);
b43legacyinfo(wl, "Broadcom %04X WLAN found\n", dev->bus->chip_id);
err = 0;
out:
return err;
}
static int b43legacy_probe(struct ssb_device *dev,
const struct ssb_device_id *id)
{
struct b43legacy_wl *wl;
int err;
int first = 0;
wl = ssb_get_devtypedata(dev);
if (!wl) {
/* Probing the first core - setup common struct b43legacy_wl */
first = 1;
err = b43legacy_wireless_init(dev);
if (err)
goto out;
wl = ssb_get_devtypedata(dev);
B43legacy_WARN_ON(!wl);
}
err = b43legacy_one_core_attach(dev, wl);
if (err)
goto err_wireless_exit;
if (first) {
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
}
out:
return err;
err_one_core_detach:
b43legacy_one_core_detach(dev);
err_wireless_exit:
if (first)
b43legacy_wireless_exit(dev, wl);
return err;
}
static void b43legacy_remove(struct ssb_device *dev)
{
struct b43legacy_wl *wl = ssb_get_devtypedata(dev);
struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
B43legacy_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
b43legacy_one_core_detach(dev);
if (list_empty(&wl->devlist))
/* Last core on the chip unregistered.
* We can destroy common struct b43legacy_wl.
*/
b43legacy_wireless_exit(dev, wl);
}
/* Perform a hardware reset. This can be called from any context. */
void b43legacy_controller_restart(struct b43legacy_wldev *dev,
const char *reason)
{
/* Must avoid requeueing, if we are in shutdown. */
if (b43legacy_status(dev) < B43legacy_STAT_INITIALIZED)
return;
b43legacyinfo(dev->wl, "Controller RESET (%s) ...\n", reason);
queue_work(dev->wl->hw->workqueue, &dev->restart_work);
}
#ifdef CONFIG_PM
static int b43legacy_suspend(struct ssb_device *dev, pm_message_t state)
{
struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
struct b43legacy_wl *wl = wldev->wl;
b43legacydbg(wl, "Suspending...\n");
mutex_lock(&wl->mutex);
wldev->suspend_init_status = b43legacy_status(wldev);
if (wldev->suspend_init_status >= B43legacy_STAT_STARTED)
b43legacy_wireless_core_stop(wldev);
if (wldev->suspend_init_status >= B43legacy_STAT_INITIALIZED)
b43legacy_wireless_core_exit(wldev);
mutex_unlock(&wl->mutex);
b43legacydbg(wl, "Device suspended.\n");
return 0;
}
static int b43legacy_resume(struct ssb_device *dev)
{
struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
struct b43legacy_wl *wl = wldev->wl;
int err = 0;
b43legacydbg(wl, "Resuming...\n");
mutex_lock(&wl->mutex);
if (wldev->suspend_init_status >= B43legacy_STAT_INITIALIZED) {
err = b43legacy_wireless_core_init(wldev);
if (err) {
b43legacyerr(wl, "Resume failed at core init\n");
goto out;
}
}
if (wldev->suspend_init_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(wldev);
if (err) {
b43legacy_wireless_core_exit(wldev);
b43legacyerr(wl, "Resume failed at core start\n");
goto out;
}
}
mutex_unlock(&wl->mutex);
b43legacydbg(wl, "Device resumed.\n");
out:
return err;
}
#else /* CONFIG_PM */
# define b43legacy_suspend NULL
# define b43legacy_resume NULL
#endif /* CONFIG_PM */
static struct ssb_driver b43legacy_ssb_driver = {
.name = KBUILD_MODNAME,
.id_table = b43legacy_ssb_tbl,
.probe = b43legacy_probe,
.remove = b43legacy_remove,
.suspend = b43legacy_suspend,
.resume = b43legacy_resume,
};
static int __init b43legacy_init(void)
{
int err;
b43legacy_debugfs_init();
err = ssb_driver_register(&b43legacy_ssb_driver);
if (err)
goto err_dfs_exit;
return err;
err_dfs_exit:
b43legacy_debugfs_exit();
return err;
}
static void __exit b43legacy_exit(void)
{
ssb_driver_unregister(&b43legacy_ssb_driver);
b43legacy_debugfs_exit();
}
module_init(b43legacy_init)
module_exit(b43legacy_exit)