linux/drivers/media/rc/keymaps/rc-medion-x10-digitainer.c

124 lines
3.6 KiB
C
Raw Normal View History

[media] ati_remote: add support for Medion X10 Digitainer remote Add support for another Medion X10 remote. This was apparently originally used with the Medion Digitainer box, but is now sold separately without any Digitainer labeling. A peculiarity of this remote is a scrollwheel in place of up/down buttons. Each direction is mapped to 8 different scancodes, each corresponding to 1..8 notches, allowing multiple notches to the same direction to be transmitted in a single scancode. The driver transforms the multi-notch scancodes to multiple events of the single-notch scancode. (0x70..0x77 = 1..8 notches down, 0x78..0x7f = 1..8 notches up) Since the scrollwheel scancodes are the same that are used for mouse on some other X10 (ati_remote) remotes, the driver will now check whether the active keymap has a keycode defined for the single-notch scancode when a mouse/scrollwheel scancode (0x70..0x7f) is received. If set, scrollwheel is assumed, otherwise mouse is assumed. This remote ships with a different receiver than the already supported Medion X10 remote, but they share the same USB ID. The only difference in the USB descriptors is that the Digitainer receiver has the Remote Wakeup bit set in bmAttributes of the Configuration Descriptor. Therefore that is used to select the default keymap. Thanks to Stephan Raue from OpenELEC (www.openelec.tv) for providing me both a Medion X10 Digitainer remote+receiver and an already supported Medion X10 remote+receiver. Thanks to Martin Beyss for providing some useful information about the remote (including the "Digitainer" name). This patch has been tested by both of them and myself. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Stephan Raue <stephan@openelec.tv> Tested-by: Martin Beyss <Martin.Beyss@rwth-aachen.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-01 19:41:46 +00:00
/*
* Medion X10 RF remote keytable (Digitainer variant)
*
* Copyright (C) 2012 Anssi Hannula <anssi.hannula@iki.fi>
*
* This keymap is for a variant that has a distinctive scrollwheel instead of
* up/down buttons (tested with P/N 40009936 / 20018268), reportedly
* originally shipped with Medion Digitainer but now sold separately simply as
* an "X10" remote.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/module.h>
#include <media/rc-map.h>
static struct rc_map_table medion_x10_digitainer[] = {
{ 0x02, KEY_POWER },
{ 0x2c, KEY_TV },
{ 0x2d, KEY_VIDEO },
{ 0x04, KEY_DVD }, /* CD/DVD */
{ 0x16, KEY_TEXT }, /* "teletext" icon, i.e. a screen with lines */
{ 0x06, KEY_AUDIO },
{ 0x2e, KEY_RADIO },
{ 0x31, KEY_EPG }, /* a screen with an open book */
{ 0x05, KEY_IMAGES }, /* Photo */
{ 0x2f, KEY_INFO },
{ 0x78, KEY_UP }, /* scrollwheel up 1 notch */
/* 0x79..0x7f: 2-8 notches, driver repeats 0x78 entry */
{ 0x70, KEY_DOWN }, /* scrollwheel down 1 notch */
/* 0x71..0x77: 2-8 notches, driver repeats 0x70 entry */
{ 0x19, KEY_MENU },
{ 0x1d, KEY_LEFT },
{ 0x1e, KEY_OK }, /* scrollwheel press */
{ 0x1f, KEY_RIGHT },
{ 0x20, KEY_BACK },
{ 0x09, KEY_VOLUMEUP },
{ 0x08, KEY_VOLUMEDOWN },
{ 0x00, KEY_MUTE },
{ 0x1b, KEY_SELECT }, /* also has "U" rotated 90 degrees CCW */
{ 0x0b, KEY_CHANNELUP },
{ 0x0c, KEY_CHANNELDOWN },
{ 0x1c, KEY_LAST },
{ 0x32, KEY_RED }, /* also Audio */
{ 0x33, KEY_GREEN }, /* also Subtitle */
{ 0x34, KEY_YELLOW }, /* also Angle */
{ 0x35, KEY_BLUE }, /* also Title */
{ 0x28, KEY_STOP },
{ 0x29, KEY_PAUSE },
{ 0x25, KEY_PLAY },
{ 0x21, KEY_PREVIOUS },
{ 0x18, KEY_CAMERA },
{ 0x23, KEY_NEXT },
{ 0x24, KEY_REWIND },
{ 0x27, KEY_RECORD },
{ 0x26, KEY_FORWARD },
{ 0x0d, KEY_1 },
{ 0x0e, KEY_2 },
{ 0x0f, KEY_3 },
{ 0x10, KEY_4 },
{ 0x11, KEY_5 },
{ 0x12, KEY_6 },
{ 0x13, KEY_7 },
{ 0x14, KEY_8 },
{ 0x15, KEY_9 },
{ 0x17, KEY_0 },
/* these do not actually exist on this remote, but these scancodes
* exist on all other Medion X10 remotes and adding them here allows
* such remotes to be adequately usable with this keymap in case
* this keymap is wrongly used with them (which is quite possible as
* there are lots of different Medion X10 remotes): */
{ 0x1a, KEY_UP },
{ 0x22, KEY_DOWN },
[media] ati_remote: add support for Medion X10 Digitainer remote Add support for another Medion X10 remote. This was apparently originally used with the Medion Digitainer box, but is now sold separately without any Digitainer labeling. A peculiarity of this remote is a scrollwheel in place of up/down buttons. Each direction is mapped to 8 different scancodes, each corresponding to 1..8 notches, allowing multiple notches to the same direction to be transmitted in a single scancode. The driver transforms the multi-notch scancodes to multiple events of the single-notch scancode. (0x70..0x77 = 1..8 notches down, 0x78..0x7f = 1..8 notches up) Since the scrollwheel scancodes are the same that are used for mouse on some other X10 (ati_remote) remotes, the driver will now check whether the active keymap has a keycode defined for the single-notch scancode when a mouse/scrollwheel scancode (0x70..0x7f) is received. If set, scrollwheel is assumed, otherwise mouse is assumed. This remote ships with a different receiver than the already supported Medion X10 remote, but they share the same USB ID. The only difference in the USB descriptors is that the Digitainer receiver has the Remote Wakeup bit set in bmAttributes of the Configuration Descriptor. Therefore that is used to select the default keymap. Thanks to Stephan Raue from OpenELEC (www.openelec.tv) for providing me both a Medion X10 Digitainer remote+receiver and an already supported Medion X10 remote+receiver. Thanks to Martin Beyss for providing some useful information about the remote (including the "Digitainer" name). This patch has been tested by both of them and myself. Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Tested-by: Stephan Raue <stephan@openelec.tv> Tested-by: Martin Beyss <Martin.Beyss@rwth-aachen.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-04-01 19:41:46 +00:00
};
static struct rc_map_list medion_x10_digitainer_map = {
.map = {
.scan = medion_x10_digitainer,
.size = ARRAY_SIZE(medion_x10_digitainer),
.rc_type = RC_TYPE_OTHER,
.name = RC_MAP_MEDION_X10_DIGITAINER,
}
};
static int __init init_rc_map_medion_x10_digitainer(void)
{
return rc_map_register(&medion_x10_digitainer_map);
}
static void __exit exit_rc_map_medion_x10_digitainer(void)
{
rc_map_unregister(&medion_x10_digitainer_map);
}
module_init(init_rc_map_medion_x10_digitainer)
module_exit(exit_rc_map_medion_x10_digitainer)
MODULE_DESCRIPTION("Medion X10 RF remote keytable (Digitainer variant)");
MODULE_AUTHOR("Anssi Hannula <anssi.hannula@iki.fi>");
MODULE_LICENSE("GPL");